12 best hybrid water heaters

Product description

Energy Star Qualified. Reduce water heating costs up to 73% compared to a standard electric water heater. Dual Voltage Capable. Select from Efficiency, Hybrid, or Electric modes to match heating requirements to environmental conditions and hot water demand. Vacation mode reduces operating costs and provides freeze protection. Electronic User Interface. The compressor transfers heat to the water while dehumidifying and cooling the ambient air. Washable air filter is easily removed for routine cleaning. 10-Year Limited Warranty.

• Energy Star Qualified
• Reduce water heating costs up to 73% compared to a standard electric water heater
• Dual Voltage Capable
• Select from Efficiency, Hybrid, or Electric modes to match heating requirements to environmental conditions and hot water demand
• Vacation mode reduces operating costs and provides freeze protection

User questions & answers

Question:	Does the 240 volt unit operate more efficiently than the 120 volt
Answer:	Hi, Thank you for your interest in this product. This 240 volt water heater operates faster and more energy cost efficient compared to 120 volt water heaters.

Product description

Our 2 Panel Hybrid Solar Water Heating Kit allows you to install your system in record time. Based on our new and improved SW-38 Solar Water Heater panels, you simply thread the panels together.

No more external connection pipes for multi panel installations! Each panel weighs slightly over 12 lbs. and is 24" by 24" but can still provide you with ample hot water. As with all of our

Heliatos Solar Water Heating Kits you can begin your system with this kit and add up to 2 more panels. With this kit you DO NOT have to solder at all!

Please Note: This System will not work with Marathon non metallic water heaters and is NOT freeze protected. If you experience freezes you either have to drain the system

or consider our Freeze Protected Solar Water Heating Systems.

Each kit comes with:

2 SW-38 Panels

All fittings, Adapters, and Connectors, Wire

1 TopsFlo TD5 Stainless Steel Pump

1 Bottom Feed Connector to connect directly to your existing water heater

1 10W PV panel to power the pump - NO grid connection required

Installation Intructions

All You have to supply is:

Your choice of 1/2" Pipe from the panels to the water heater(Copper, CPVC, or PEX)

Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.

Insulation for the pipes.

Your existing Water Heater

Tools needed for installation

• Heats water for your house or cabin using the sun
• Connects to your existing electric or gas water heater
• Hybrid System - Never be without hot water even on cloudy days
• Slash your electric or gas bill

User questions & answers

Question:	I have a 100 gal livestock water tank. I want to keep the water from freezing. Can I pump the water into the panel and drain back to the tank
Answer:	Hello,In general it is possible to do what you are thinking about, however this kit would include many parts you don't need for this project, because it is designed to connect to a standard water heater. There is one very important issue with doing this which is that the water in the panels cannot be allowed to freeze so you would have to use a two stage system with antifreeze circulating through the panel and a heat exchanger. Basically it is a lot cheaper and simpler to just keep the water agitated so that it cannot freeze. If that is not a possibility you should look at our GS Solar Water heaters as they could be adapted to your project.Thank You,Heliatos Solar
Question:	Is there any way to get this to work during the winter in a freezing climate (Pennsylvania
Answer:	Hello,This system circulates water through the panels which will freeze and destroy the panels. You have to either drain it before any freeze or consider a freeze protected system (GH type system like Amazon ASIN B00IM1SZ4M ).Thank You,Heliatos Solar
Question:	Would 2 panels be adequate for a summer vacation home in Kenai Alaska with 40 gallon electric hot water tank
Answer:	I would go with 3 panels but you can always start with two and add on. I love my system and save about $30.00 per month on my electric bill. I have a 6 panel system and live in Tampa fl. In the summer I can turn off the breaker for the water heater and use only solar
Question:	would this solar panel system work for a swimming pool (13,000 gal) in southern Ohio climate in summer or to extned a bit the swimming season
Answer:	Hello,With two panels the temperature increase on a 13,000 gallon pool would not be noticeable. Also this kit includes all the parts needed to connect to a water heater, which would be useless for connecting to a pool.For pools you need a large collector area so to use this type of setup you would have to put up a large array of these panels. This is not a very cost effective way to go.Thank You,Heliatos Solar

Product description

Twinkle Star 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit

Package Include

1x hot isolation valves

1x cold isolation valves

1x pressure relief valve

Material: Heavy Duty Brass

NOTES:

1. The water heater owner must manually operate the valve at least once a year to ensure the waterway is clear.

2. Please check to see that the dis-charge line is securely attached and properly in-stalled before lifting the lever, prevent injury or property damage.

2. Avoid contact with the hot water dis-charged during the test to prevent personal injury.

3. At least every three years  the valve shall be inspected by a licensed plumbing contractor or qualified service technician and replaced as necessary.

4. If discharge occurs during normal operation CALL A PLUMBER IMMEDIATELY. Discharge indicates an unsafe temperature or pressure Condition or a problem with this valve.

• Twinkle Star 3/4 Inch Isolation Kit involves hot and cold valves 500WOG with 1/4 red and blue handles for easy identification and use. Integrated drain valve with brass safety cap for easily maintenance. Equipped with full port ball valve for better flow rate.
• Superior Integrated Design: This complete kit made from lead free heavy duty brass for years of usage. One-piece forged brass body effectively prevents any leakage or dripping. The main isolation valve set is factory tested to be leak-free so that your heater can be maintained periodically during each flushing sequence.
• Certification: The components are certified lead free. You will also find CSA certifications on the water flex and the gas flex as a proof of their authenticity. Meets all federal & state standards for lead levels in drinking water system components.
• Widely Use: The tankless kit works with all 3/4 inch size is suitable for most U.S. residential usage, both residential and commercial gas tankless water heater brand such as Noritz, Rinnai, Rheem, Takagi, Navien and so on.
• Tips: If you encounter any problems in the process of using our products, please contact us, our team will solve any problems when you meet them in time.

User questions & answers

Question:	Does it work on a Bosch brand
Answer:	It's not brand specific.
Question:	What type of pipe does this work with
Answer:	Whatever you connect it to. They're all threaded connections, so brass, PEX, whatever.
Question:	Can these be used for cpvc water line
Answer:	If you are using this as a connection set of valves for a tankless water heater and have cpvc water lines you will want to connect a flex line with sharkbite fittings to the cpvc line and then connect the flex lines to the hot and cold valves (blue and red). The third fitting is for pressure relief and a length of pvc with a female fitting will connect to the valve. Hope this gives you an idea. I am not a plumber. Read your Tankless Water heater instructions carefully.
Question:	where are these made
Answer:	There is no mention of the country of origin on the box or cast into the product. What I can say is that the casting and finish appear to be of the highest quality, and I would have no reservations about recommending these isolation valves to anyone. My personal opinion is that this a top quality product.

Product features

Twinkle Star 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit

1. The water heater owner must manually operate the valve at least once a year to ensure the waterway is clear.

2. Please check to see that the dis-charge line is securely attached and properly in-stalled before lifting the lever, prevent injury or property damage.

3. Avoid contact with the hot water dis-charged during the test to prevent personal injury.

4. At least every three years the valve shall be inspected by a licensed plumbing contractor or qualified service technician and replaced as necessary.

5. If discharge occurs during normal operation CALL A PLUMBER IMMEDIATELY. Discharge indicates an unsafe temperature or pressure Condition or a problem with this valve.

Product description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4'' NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty. It can provide between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

• Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches ;Pipes fittings :3/4 inch NPT
• Digital temperature control in 1-degree increments allows control of hot water; Activation Flow: 0.3 GPM
• Copper and stainless components designed for efficiency, durability and easy replacement.
• Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
• Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, 40 required breakers, 112.5 maximum power (AMP), 8 required wire.Amperage Draw:113 A
• Required Breaker Quantity: Three 40 Amp Double Pole
• Recommended Electrical Panel: 200 Amps

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	In order to have a 208 volt power you would need to be pulling off of 2 legs of a 3 phase service. Are you sure you have 3 phase?
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	Approx 7x11. The cover is approx 8x12
Question:	What is the power consumption of this tank-less heater
Answer:	This is a 240V/208V heater. At 240V this heater draws 6.25 amps.
Question:	remote
Answer:	Are you asking if it can be wired 208 volt? The answer is yes. I don't have any experience with model you are referring to otherwise.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Professional classic tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

• External digital thermostatic control with LED display (+/1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper immersion three heating elements, field Serviceable
• Simple installation – bottom 3/4 inch NPT water connections
• Threaded for easy replacement, simple installation, digital temperature display

User questions & answers

Question:	I have 200a service in my house. can i add a 200a sub panel to service only the tankless water heater
Answer:	You would not need that much but yes you could. I am very happy with this unit and would recommend it to anyone.
Question:	What is the warranty period
Answer:	Hello- All the Rheem RTEX heaters have a 5 Year Heat Exchanger Warranty, 1 Year Parts. http://www.rheem.com/product/tankless-electric-water-heaters-professional-classic-series-rtex-24-rtex-27 ** go to warranty tab ** Thanks! Ben
Question:	What size house would this be recommended for
Answer:	Hello-The Rheem RTEX-27 should keep up with 2 standard sources of hot water running at the same time. Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=professional-classic-tankless-electric-rtex-24-professional-classic-tankless-electric-spec-sheet ThanksBen
Question:	what breakers are required for this unit
Answer:	size of breaker required for this unit?

Product description

The Camplux tankless water heater TE27 applied 27kW heating system, the electric water heater offer you instant, endless and consistent temperature hot water in 24 hours of 7 days. This electric water heater with compact size and sleek design, can be mounted in any angle, perfect for kitchen, school, bathroom sinks, hospital and hair salon. The whole home electric water heater will only draw the amount of electricity required to produce the hot water, no need pre-heating to save energy. The tankless electric water heater is leakage proof and over-heat protection start when the temperature reach to 153°F. The Camplux electric water heater will brings you outstanding performance and comfortable hot shower.

Specification:

Power: 27kW Electric water heater

Panel: IMD decoration

Water pipes fitting: 3/4" NPT male

Dimension (in):

Product size(WxDxH):10.23x3.66x15.15in

Packing size(WxDxW): 14.37x5.19x18.7in

Packing list:

1 x 27kW Tankless electric water heater

1 x Smart controller

1 Set of fixing kits

1 x Instruction manual in English & France

• SMART & CONSIDERED DESIGN - The point of use tankless water heater design with touch control & digital display, save space, smart and easy to set temperature. Comes with remote smart controller, very convenient even install under sink.
• RELIABLE AND DURABLE- The 27kW tankless water heater comes with multiple protection. NFS approved, offer lead-free water. ETL safety certified, leakage and overheat protection device to ensure your safety. Stainless steel component for high efficiency and durability.
• INSTANT ENDLESS HOT WATER - Enjoy instant and endless hot water! The on demand tankless water heater rated power up to 87,500 BTU. Easy to get water between 86°F - 125°F.
• MINIMUM ACTIVATION WATER FLOW - Camplux electric tankless water heaters just need 0.85 GPM water flow for activation. No need to waiting and pre-heating. Get hot water in seconds.
• COMPACT DESIGN & MULTI-ANGLED MOUNTING - The compact size electric water heater requires a connection of 3* 50A 2 poles circuit breaker. Install close to outlet for energy saving. Can be mounted Multi-angled, ideal for kitchen, school, hospital and hair salon. Please make sure it is the right size for you: 27kW at 240V, product dimensions 15.15" x 10.23" x 3.66", water pipes fitting: 3/4" NPT male.

Product features

FEATURES

The Camplux tankless water heater TE27 applied 27kW heating system, the electric water heater offers you instant, endless and consistent temperature hot water in 24 hours of 7 days.

This electric water heater with compact size and sleek design, can be mounted in any angle, perfect for kitchen, school, bathroom sinks, hospital and hair salon.

The on demand electric water heater will only draw the amount of electricity required to produce the hot water, no need pre-heating to save energy and heat up in seconds. Multiple protection to ensure your safety.

The tankless instant water heater is leakage proof and over-heat protection will start when the temperature reach to 153°F. Smart control, remember your favorite temperature and convertible freely for Fahrenheit and Celsius.

The Camplux electric water heater will bring you outstanding performance and comfortable hot shower.

Specification:

Voltage: 240V

Power: 27kW

Panel: IMD decoration

Water pipes fitting: 3/4" NPT male

Max. Inlet Pressure: 145psi

Dimension (in):

Product size (WxDxH):10.23x3.66x15.15in

Kindly note: This is an electric unit that requires professional licensed technician to install per city/state safety code.

Bullet Points of Camplux Electric Tankless Water Heater

• INSTANT ENDLESS HOT WATER - No need pre-heating and get hot water in seconds.
• REMOTE SMART CONTROLLER - Remember your favorite temperature and convenient to use even install under sink.
• ETL & NSF APPROVED - Offer you lead-free water quality, excellent performance and safety.
• FLEXIBLE 180° INSTALLATION – Can be mounted in any angle, ideal for bathroom, kitchen, school, hospital and hair salon.
• COMPACT SIZE - For indoor installation with compact and space saving design.

Smart Touch Control and LED Display

Switch freely between °F & °C. Temperature setting ±1 degree accuracy

Remote Controller

Very convenient even install under sink.

Standard 3/4 NPT Fitting

Supplies instant, consistent and endless hot water.

Flexible 180° Installation

Stylish, modern design that blends in any location.

Home

Hair Salon

Office

Product description

"The Stiebel Eltron Tempra 29 Plus Tankless Water Heater features exclusive Advanced Flow Control German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 29 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE - ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 28.8 KW/21.6 KW; Min. recommended household electric service 200 A; Amperage draw: 3 x 40 A 3 x 35 A; Number and min. recommended size of circuit breakers: 3 x 35 A (DP); Number of runs and min. recommended wire size (copper): 3 x 8/2 AWG; Max. temperature rises: 92 F/92 F at 1.50 GPM, 87 F/66 F at 2.25 GPM, 66 F/49 F at 3.00 GPM, 44 F/ 33 F at 4.50 GPM, Min. water flow to activate unit: 0.77 GPM/2.9l/min; Weight: 19.0 lb/8.6 kg; Nominal water volume: 0.39 gal/1.5 l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4"" NPT."

• On demand a continuous and unlimited supply of hot water
• Sleek design saves space and no venting required
• Requires hard-wired 240 or 208-volt electric service, with a maximum draw of 28,800 watts at 240 volts or 21,600 watts at 208 volts
• Requires 3 separate dedicated 40 amp breakers with 8 gauge copper wiring, and a minimum of 200 amp total service to the residence

User questions & answers

Question:	How can i make tempra trend 24 work with my bosch shx33a05uc/22 dishwasher? the dishwasher will not advance to next cycle. water is not hot enough
Answer:	This water heater activates at 0.5 GPM and will heat to your set temperature at the correct flow rate for that set temperature. Please call our Technical Department at 1-800-582-8423 Ext 6 with more details so we can help you better. (for example, does the dishwasher have its own heating element, distance between the 2 units, etc...) Thank you.
Question:	Electric panel is ~50 feet from where i want to install the tempra 29 trend. is this distance ok for #8 thhn wire
Answer:	The recommended wire is 8/2 and there is not a limit to distance written in the install directions. You need to check with your electrician. Make sure he is state license and insured. We have installed a Tempra 29 and our electrician ran three 8/2's approx. 30' with no question. But check with your electrician and local codes. God bless you and happy New Year.
Question:	Is there an installation kit available for this? i am installing in a remote location & plumbing parts are not available? water lines are pvc
Answer:	There is no specific installation kit. However, we suggest using flexible braided hose connections that screw onto the hot and cold water for the first 18" or so. These connections are easy to remove to check a filter screen or if needed to work on the unit in general. The connections are 3/4" NPT. Please feel free to call our Technical Support Department at 1-800-582-8423 ext 6 with any questions. Thank You.
Question:	Where is it made
Answer:	We asked the Manufacturer and they replied: "These are made in Holzminden, Germany"

Product features

1 Find your approximate ground water temperature on the map.

2 Check the column on the table to see how many fixtures can be supplied at the same time for each model.

Product description

Did You Know That A Tank Less Electric Water Heater Could Save You Thousands Of Dollars In The Long Run? Looking for a cost-effective, practical and heavy-duty hot water heater for your home? Want to cut down on maintenance costs and enjoy hot water anytime you need it? Why settle for cheaply-made tank-less water heaters, when you can have the smartest and most innovative tankless electric heater? Introducing The Sio Green Sio18 80A/18kW Whole House Infrared Electric Tankless Water Heater! If you are building a new home or renovating your house, then you need to consider a budget-friendly alternative to all those water heaters that require thousands of dollars in maintenance each year. With the Sio Green tankless heater that utilizes Far infrared ray and quartz elements, you don’t have to worry about maintenance costs, since you will have: NO Corrosion – since no metal parts come in contact with water NO Calcium Deposits – which is ideal for hard water areas NO Flimsy Coil Metallic Elements – which means NO maintenance costs NO Bulky & Impractical Heaters In Your Home – our tankless heater is as large as a shoe box. Why Choose Our Environmentally-Friendly & Cost-Effective Water Heater? Save Your Time & Effort Enjoy Maximum Operational Longevity Save Your Precious Utility Room, Kitchen Or Bathroom Space Cut Down On Maintenance Costs Adjust It To Your Family’s Exact Needs Super-Easy To Install Don’t Hesitate! Check out your home area and choose the ideal tankless water heater for your home! Indulge Yourself! Click “Add To Cart” NOW & Get Your Sio Green Premium Infrared Water Heater 100% RISK-FREE 30 Days Return from Amazon.

• ✔HOT WATER ANYTIME YOU WANT WITHOUT ANY HASSLE! The Sio Green premium tankless water heater is here to help you enjoy your hand wash or wash the dishes with warm water anytime you want without any fuss. The infrared heating design will heat ONLY the water you use, thus allowing you to save time and money!
• ✔PATENTED TECHNOLOGY, NO COIL METALLIC ELEMENTS, NO CORROSION, NO MAINTENANCE! That’s right! Our tankless hot water electric heater will create heat without direct contact with metals, which will in turn prevent corrosion, limescale deposit and calcium buildup. As a result, you will have to spend $0 on maintenance or replacements!
• ✔SAVE YOUR BATHROOM OR KITCHEN SPACE WITH OUR COMPACT WATER HEATER, which is not only ideal for small bathrooms, kitchens or cabinets, but can be also installed easily. The ergonomic size and simple yet innovative construction will allow you to install it almost anywhere, including hotels, stores or restaurants!
• ✔ADJUST IT TO YOUR EXACT NEEDS EFFORTLESSLY! Our electric tankless hot water heater features Automatic Power Technology so you can easily tailor its performance to your family’s needs and saving the energy and only use what you need, which is ideal for any home application.
• ✔100% SATISFACTION OR YOUR MONEY BACK! That’s our guarantee! If you are not 100% satisfied with your budget-friendly, space-saving and ultra-practical tankless water heater within 30 days, we will offer you a refund or a replacement. No questions asked! What are you waiting for? Get yours now while supplies last!

Product features

The benefits of Quartz Elements

No more routine flushing to maintain some level of the efficiency and since you don’t have to replace the heating elements periodically, it will save you both time and money!

No Corrosion & No Calcium Deposits

The systems energize your water with quartz elements that create heat without requiring direct contact of metal for heating with the water and minimizes your chances of corrosion accumulating in the water.

Automatic Modulating Technology

In Automatic mode, the software is using smart modulating technology and formula to calculate the difference between the desired temperature and current temperature, then predicts how much power it requires to ensure the process temperature remains as close to the set point as possible.

Temperature Adjustment

Our premium Sio18 designed for high performance usage in Residential operating 24h/a day for 365 days a year.

Check Specifications

SioGreen products must be installed by a licensed and qualified electrician in accordance with all applicable national, state, and local electrical codes depending on country. Before installing this product, ensure that the home has sufficient electrical power available to handle the maximum amperage load of the applicable model.

1) FIND YOUR LOCATION ON THE MAP AND NOTE YOUR THE INLET COLOR REGION

Manufacturer Cover: This unit is qualified One-to-One Replacement Cover service contract (“Replacement Cover”) provides for the replacement of the Product purchased by you if found to be defective during the term of two year(s) from the date of purchase. When the Product failure occurs due to an electrical or mechanical defect, You will receive a replacement product of like kind, quality and value (same condition). Once the Product has been replaced, the cover will carry on the rest of the period from the date of original purchase. Notwithstanding the foregoing time period, the Heat Exchanger portion of the product shall have an additional Eight year limited cover beginning at the expiration of the above two year One-to-One Replacement Cover. This means that, the Product will have a total cover of ten (10) years stated from the date of Sales Invoice/Receipt of the Product, subject to payment of the applicable fee, shipping fee for the Replacement Cover selected. Contact SioGreen to execute this Replacement

Product description

Extend the life of your water heater with this design



E-SDS magnesium flexible anode rods, hex plug, 42-inch ( four sections) anode rod fits into any tight spot you may find yourself faced with.



Made from magnesium rather than aluminum to ensure that you avoid any potential unhealthy side effects from aluminum by-products. Magnesium can actually improve your health by aiding in blood and heart disorders.

It is also useful in lowering anxiety, relieving menstrual cramps, counter acting adhd, strengthening bones, and a long list of other advantages.

Unless you want to replace your entire water heater you are going to have to replace your anode rod at one point or another.Anode rods provide you with the best solution to your needs by providing a reliable product that ensures optimal water quality.



FITS: Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and more Brand that also use the standard ¾" NPT Anode Rod Connection.



Package:

1 X Anode Rod

1 X TAPE

1 X User Manual

• ★Water Heater Anode Rode Replaceemnt:Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
• ★Flexible Design for Tight Areas：The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
• ★ Advantages of Magnesium Anode Rods - :Made from magnesium to provide a healthy solution to your needs.
• ★Size:42" overall length,each section is about 9" long. 0.80" Diameter, 3/4" threads.
• ★FITS: Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and more Brand that also use the standard ¾" NPT Anode Rod Connection.

User questions & answers

Question:	How long is each section? I only have 11" of clearance at the top of the water heater
Answer:	42" overall length,each section is about 9" long. 0.80" Diameter, 3/4" threads.
Question:	Is this compatible with a Rheem water heater or reliance water heaters
Answer:	Yes, it will work for Rheem, Reliance, Richmond, Kenmore, State, GE and more Brand that also use the standard ¾" NPT Anode Rod Connection.

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75" H x 13.75" L x 13.5" D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	Yes, that is correct! Look for 1/2 to 3/4" hoses here on Amazon, or whatever you connection size is. They are very cheap and convenient here.
Question:	would this be able to supply a shower
Answer:	Installed at the outlet of the water heater, mainly to prevent electric shock, which is the second layer of protection
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	Should it be a white line? It means it has been powered on and can work after waiting for your settings
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	Dear Customer,  Thanks for your inquiry,BISELONG this water heater is not equipped with a remote control, you only need to adjust the temperature you want, generally do not need to adjust again.If you get any other question, please feel free contact us at [email protected] any time, we will do best to serve and help. Wish you pleasant shopping. Fly form BISELONG

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

Rheem Marathon non-metallic electric water heaters are durable, lightweight, and warranted not to leak as long as you own your home. Seamless, blow-molded, polybutene tank-impervious to rust and corrosion. Multiple layers of filament wound fiberglass give the tank unmatched strength. Polyurethane insulation helps reduce energy consumption. Recessed drain valve is out of the way brooms and scrubbers. High temperature polysulfone dip tube. Tough molded polyethylene outer shell resists dents, scratches, and salt air.

From the Manufacturer

Rheem Marathon non-metallic electric water heaters are durable, lightweight, and warranted not to leak as long as you own your home. Seamless, blow-molded, polybutene tank-impervious to rust and corrosion. Multiple layers of filament wound fiberglass give the tank unmatched strength. Polyurethane insulation helps reduce energy consumption. Recessed drain valve is out of the way brooms and scrubbers. High temperature polysulfone dip tube. Tough molded polyethylene outer shell resists dents, scratches, and salt air.

• Efficiency: 0.90-0.94 EF
• Recovery rate: 20-Gallon GPH at a 90-Degree rise
• Thermally fused upper element provides protection against dry-firing
• Full-flow, brass drain valve
• Standard replacement parts

User questions & answers

Question:	whats the SEER Rating
Answer:	"SEER" is an energy efficiency rating that use primarily in rating air conditioning units. The higher the rating the more efficient is the unit will be.
Question:	We have a marathon water heater model # mx 85245. the element wore out. the element # is sgbi tc 2457. where can we find one
Answer:	1) Call a hardware store or electrical shop to see if they have that specified element. 2) Turn off electricity to heater. Find a place that carries water heat elements. Drain tank, remove element (or both elements) that has failed. Take to store with you to be sure what they have matches what you need.
Question:	Has anyone experienced a rash of leaks down line from this water heater after installation? 2 , Eccess expansion/contraction
Answer:	OK, I see the post are old, but I will add some info. When water is heated, you have to have room for expansion. If you are on city water and have a check valve, the pressure can build greatly, So you need a expansion tank. If you are on a well, you most likely won't need one, as your well tank will handle the job. I live in a city and never had check valves till a few years ago, when they widened the road, they moved all the water meters and added check valves. Many people started having problems with leaks, pop off valves opening after they added check valves! I installed a expansion tank, fixed the problems and never had any other problems. Before I did this, I put a pressure gauge on the system, city pressure 45psi, after taking a shower/bath or using hot water for washing machine, I noticed over about a 20 minute time frame, pressure going to just a tad over 100psi. So yes, having large pressure swings is going to happen without a expansion tank. You can get a pressure gauge that screws on the garden hose, set the gauge outside the window and see if this is what's happening.
Question:	my rheem marathon 50 gal water heater is leaking in the upper element. How do I fix, any links you know of
Answer:	If it is leaking around the threads of the upper element, you could DRAIN the tank (there should be an anti siphon valve installed), and remove the element and, using Teflon pipe sealing tape, wrap the thread (at least 3 full layers) and reinstall. If the tank continues to leak, you should have the tank replaced under warranty. Good Luck.DON'T forget to turn off the electricity!!If you are inexperienced or uncomfortable ding any of this, CALL A PLUMBER.

Product description

The Tempra® Plus is the most technologically advanced tankless water heater available on the market today. Advanced Flow Control is exclusive to the Tempra® Plus and ensures a constant temperature output no matter how great the hot water demand is. Advanced Flow Control technology works by automatically adjusting the flow of water to eliminate unpleasant temperature fluctuation. What that means to you is a consistently satisfying experience every time, all the time !

• Digital temperature control. Voltage : 240 Volt or 208 Volt
• Proven reliability
• No venting required
• Sleek design fits anywhere
• Save at least 15-20% on the hot water portion of your electric bill

User questions & answers

Question:	How many gallons per minute does this unit heat
Answer:	To test the unit I connected it to an outside faucet. I filled a 5 gal bucket in 1 min 10 seconds. Incoming water temp 52 degrees. Outgoing 136 with T Stat set to 140. Water psi set to 28psi.
Question:	what is the warranty for tempra 24 plus
Answer:	Is the warranty affected if I install this myself?
Question:	For North Texas, will this supply two showers running at the same time
Answer:	In south Texas here, probably the same inlet temp out of my well. Just filled a jacuzzi while running three sinks to try and get the 36kw plus model to blow my breaker. Got hot hot water but couldn't get it to trip the main breaker. This is the best thing for jacuzzis!
Question:	amp or 60-amp breakers? The specsheet for the Tempra 24 Plus on stiebel-eltron's website says 2x 50 amps, but people here seemed to use
Answer:	Greetings: The Stiebel Eltron TEMPRA 24 Plus requires 2 - 50 amp breakers, or 100 amps.

Product features

Sizing Guide

1 Find your approximate ground water temperature on the map.

2 Check the column on the table to see how many fixtures can be supplied at the same time for each model.

3 Use the actual max. flow rate to fine-tune these recommendations.

4 Make sure you have sufficient electrical service for the model.