14 best hot water tank for boat
A hot water tank for a boat, often referred to as a marine water heater, serves the purpose of providing hot water for various onboard applications, such as showers, sinks, and galley use. These water heaters are specially designed to meet the unique requirements and space constraints of boat installations. Here are some key points about hot water tanks for boats:
Types of Marine Water Heaters:
- Tank Water Heaters: These are the most common type and work by heating and storing a specific volume of water in an insulated tank. They are available in various sizes to suit different boat sizes and usage needs.
Fuel Sources:
- Marine water heaters can be powered by various fuel sources, including electricity, propane, or diesel. The choice of fuel source often depends on the boat's setup and the availability of fuel.
Installation:
- Proper installation is crucial to ensure the safe and efficient operation of a marine water heater. It should be securely mounted in a suitable location on the boat, typically in an accessible but out-of-the-way area.
- Marine water heaters must be installed in compliance with safety regulations and guidelines to prevent accidents.
Heat Exchangers:
- Some marine water heaters feature heat exchangers that use the boat's engine coolant system to heat the water in the tank.This is a common method for heating water while the engine is running.
Electric Heating Elements:
- Electric marine water heaters have heating elements, similar to those in residential water heaters. They require a source of electrical power to heat the water.
Capacity and Size:
- The capacity of a marine water heater is typically measured in gallons or liters. The choice of capacity depends on the number of people on board and the hot water demands.
- The physical size of the water heater is crucial because space is limited on most boats, so it must fit comfortably in the designated installation area.
Safety Features:
- Marine water heaters often come equipped with safety features such as pressure relief valves and temperature controls to prevent overheating and ensure safe operation.
Maintenance:
- Regular maintenance is essential to keep a marine water heater in good working condition. This includes flushing the tank, checking for leaks, and ensuring the heating elements are functioning correctly.
Energy Efficiency:
- Some marine water heaters are designed with energy-efficient features to conserve power or fuel, which is especially important on boats with limited energy sources.
Having a reliable hot water source on a boat is essential for the comfort and convenience of those on board. Marine water heaters are designed to provide a steady supply of hot water, making life on the water more comfortable and enjoyable. Proper installation and maintenance are key to ensuring their safe and efficient operation.
Below you can find our editor's choice of the best hot water tank for boat on the marketProduct description
Accumulator Tank. This Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. For example, PAR-MATE 2.5 or any Jabsco pressure pumps as found in boats, RV's, motor caravans, coaches and similar applications. The Accumulator Tank smoothes water flow and reduces on/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system. The even flow of water gives better control of hot water temperature especially noticeable with instantaneous gas water heaters and with showers. The reduced on/off cycling reduces noise from the pump motor, and from shock pressures (pipe hammer). It also reduces battery drain, and gives longer pump life. Features:. Internal Bladder Smoother and More Even Flow Quieter Water System Better Temperature Control Longer Pump life Lower battery Drain Simply fitted to new or existing systems Compact size Snap-in port fittings include both: 1/2" barbed hose fittings and 1/2" threaded hose fittings Tank: hygienic, light, compact, impact and pressure resistant plastic construction.
- Smoother flow, quieter water systems
- Internal rubber membrane eliminates maintenance and allows universal mounting
- Better control of hot water temperatures
- Simply fitted to new or existing systems, snap-in port fittings
- Pressurized 1 Quart (1L) Accumulator Tank
User questions & answers
Question: | Can this be installed at any angle or sideways |
Answer: | It's a pressured chamber, so it can be installed in any orientation....... |
Question: | Does this hold up against caustics like bleach |
Answer: | So far it has 3 years on off the grid seasonal cabin. I add bleach to my holding tank to be safe and no pump issues t all. |
Question: | What are the dimensions of the tank |
Answer: | , about 4-5",in diameter and 12-14 tall has two connection witch I only needed one was hard two fine the fittings for it but they are there |
Question: | Would it be worth putting two of these in |
Answer: | Personally I would not. If you want more volume find an accumulator tank for a reverse osmosis system (2 to 3 gallons) and install that. It's probably half the price as well. I did this after the plastic one failed in a few years. |
Product description
WaiWela Mini Tanks combine quality materials and efficient manufacturing techniques to produce an affordable solution to an everyday problem. Millions of gallons of fresh water are wasted everyday waiting for the hot water to arrive. Install a WaiWela Mini tank under your sinks to eliminate the wait and reduce the waste of fresh water. WaiWela (pronounced Vi Vela) means hot water in Hawaiian.
From the Manufacturer
WaiWela Mini Tanks combine quality materials and efficient manufacturing techniques to produce an affordable solution to an everyday problem. Millions of gallons of fresh water are wasted everyday waiting for the hot water to arrive. Install a WaiWela Mini tank under your sinks to eliminate the wait and reduce the waste of fresh water.WaiWela (pronounced Vi Vela) means hot water in Hawaiian.
- Under sink installation, floor or wall mount
- Install at point-of-use
- Adjustable thermostat with overheat protection
- Glass lined tank
- Attached power cord
User questions & answers
Question: | Does it have an anode |
Answer: | I believe so that is what he heats the water |
Question: | Does this plug into the wall or need to be hard wired? It says comes with power cord |
Answer: | Plugs into 110 outlet |
Question: | how long does it take to initially heat the water in this tank and how long does it take to recover |
Answer: | Haven't actually timed it, but it doesn't take long to heat the water or recover from heavy usage of hot water. So far I am very pleased with unit. |
Question: | Can this be used as a point of use heater rather than just as a shower heater |
Answer: | Hello. Yes, the WM-6.0 can be used to supply hot water to any point of use in addition or besides a shower. GadgetsGo is an Authorized WaiWela Distributor. Kind Regards, Ross K GadgetsGo |
Product description
Product Specifications:
Material: SUS316 stainless steel
Mounting Methods: Standard SAE 5 hole pattern
Mounting: 5 pieces of M5 screws and 2 mm thick gasket
Rated current for alarm switch: 500mA
Output signal: 0-190ohm
Resolution range: 21mm
Operating temperatures: - 40 to 85°C
Protection rank: IP67
Length range: 200MM; 300MM ; 350MM; 450MM
Output signal: 0-190ohm or 230-33ohm (Please choose one signal you need when placing the order )
Packing List
1* Level Sensor
- Connetion:Blue wire--ground(-) ,Brown wire--Instrument signal wire
- Material: SUS316 stainless steel . Mounting Methods: Standard SAE 5 hole pattern .
- Output signal: 0-190ohm; Resolution range: 21mm .
- Length range: 200MM; 300MM ; 350MM; 450MM . Output signal: 0-190ohm or 230-33ohm (Please choose one length range & signal you need when placing the order ) .
- Level Sensor Support : Fuel Level Gauge and Water Level Gauge .
User questions & answers
Question: | what length do i need for a tank that is 8.75" top of tank to (inside) bottom of tank |
Answer: | Search for a size that's slightly smaller than your measured size. |
Question: | What size hole needs to be drilled |
Answer: | 36mm hole saw is perfect. The float is 1.370" (34.8mm) in diameter. The gasket is 1.44" (36.48mm) ID so figure the clearances you would like. To quickly align the gasket holes with the sender align the little bump/tab on the gasket beneath the cord on the sender. This makes it easy to align the offset holes regardless of the sender head orientation you choose for your install. |
Question: | is it good for a rv fresh water tank |
Answer: | It is made for a boat lol so probably |
Question: | Is blue or brown ground on this sender |
Answer: | On the unit I bought for my boat. Blue is ground and Brown went to instrument sending Peg on the gauge |
Product description
-Fixing dimension: 52mm(2")
-Indicating Range: 3/4 E-F
-Signal: 0-190ohm
-Working Voltage: 9-32V(12V/24V) )
-Backlight: have 7 colors Backlight :red.yellow.orange.green.blue.purple.white you can choose the color that press the gauge back button
-Operation mode: LCD display, stepper motor
Package Includes:
1x Water Level Gauge
1x Installation Instruction
- Water Level Meter is universal for all kinds of Boat Yacht Auto Motor Home Truck Touring car and Touring car
- Water Level Gauge is suitable for all kinds of water level sensors with same signal, and display liquid level of the water tank
- Water Level Indicator uses moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
- Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
- Water Tank Gauge Attribute: IP67 waterproof, anti-fogging function.
Product description
The Eccotemp Mini Tank 7.0 water heater is the largest of Eccotemp's point-of-use mini tank water heaters. With a holding capacity of 7.0 gallons, the EM 7.0 is designed to supply hot water on demand to any faucet or sink without long hot water pipe runs. Perfect for under the counter and point-of-use applications, the EM-7.0 can meet all the hot water needs of hand wash and kitchen sinks, whether the environment is residential, commercial or industrial. The EM-7.0 can replace traditional central hot water heaters, conserving water and reducing energy waste. The EM-7.0 can also be plumbed in with the central water heater to act as a booster. This lightweight and compact mini tank heater has been specifically manufactured for easy installation. The EM 7.0 comes with installation hardware that enables it to be easily mounted on the wall, or it can be free-standing. It is designed to operate at 150 psi maximum water pressure, so it is recommended that you install a pressure reducing valve if your water pressure is greater than 150 psi. Product Features: Tank Volume: 7.0 gallons Product Dimensions: 17.25"H x 14.25"W x 17.25"D Heating Capacity 1440 Watts Point-of-use, ideal for under the sink providing instantaneous hot water Easy installation with 120V outlet plug Wall and floor mountable Limited warranty: 2 year parts, 5 year leaks Hot and cold water feed No need for costly re-circulating lines and pumps Small and compact Quick recovery time Adjustable temperature range 70F to 140F Voltage 110/120 Runs off 12 AMPS Single Phase Max Operating Pressure of 150 psi standard 1/2" NPT Connections T&P valve included Suggested Uses: Homes Cottages Kitchenettes RVs Boats Office Please contact Eccotemp customer service at 1-866-356-1992 x1 for assistance with installation or operational directions.
User questions & answers
Question: | Can this be installed horizontal |
Answer: | The model number EM-7.0 can only be installed vertically. |
Question: | Im wanting to put this in a rv, what are the installed dimensions with the valve installed |
Answer: | Hello there! The height of the unit is 19.75 therefor it could around 23 to 25 inches with the valve installed. Thank you! Eccotemp Systems LLC |
Question: | How long is the electrical cord |
Answer: | Hello there, The cord is 4 ft long. Thank you! Eccotemp Systems LLC |
Question: | Is there a way to increase the water pressure coming out |
Answer: | No. Pressure in equals pressure out. Could install a pressure pump on the cold water inlet side to boost the pressure. |
Product description
Made in USA
- Maintains perfect drinking water quality in boats and RVs
- Prevents foul tasting or smelling potable water
- Can be used as often as needed to ensure quality of bathing and drinking water and ice
- 1 fluid ounce treats 20 gallons of water
- Made in USA. Satisfaction guaranteed!
User questions & answers
Question: | Have house 250 gal holding tan of city water which sets unused for 5 months. Should I treat it before beginning to consume water? What dose and produc |
Answer: | I treat my 240 gallon holding tank with this product. I have used it for two years and it keeps my water fresh. My water sets for 4 months unused. My tank is on a boat and is plastic. |
Question: | How exactly does this product differ from the Aquabon product that seems to no longer be available |
Answer: | I have never used the Aquabon that you mentioned. I am, extremely, happy with this product. We have only had our boat for two seasons, found this product last year, and it keeps our water fresh. We still choose to use bottled water for cooking and drinking. |
Question: | Can i use household |
Answer: | This product is for potable (drinkable) water that is stored in tanks. If you store water tank anywhere, then you can use this to keep it smelling and tasting fresh. |
Question: | Will this last 6 mos in a fresh water tank on a boat and is the water drinkable with this additive |
Answer: | I use it in my water tank year round. I just opened my boat up after 4 months and my water taste good and is drinkable |
Product features
Star Brite Aqua Water Treatment and Freshener
- Maintains perfect drinking water quality in boats and RVs.
- Prevents foul tasting or smelling potable water.
- Can be used as often as needed to ensure quality of bathing and drinking water and ice.
- Prevents water from taking on chlorine, sulphur, plastic or metal odor or taste.
- 1 fluid ounce treats 20 gallons of water
Directions
Before adding fresh water to tank, add 1 fluid ounce of AQUA Water Treatment & Freshener for every 20 gallons of potable water to be treated then fill tank. Use as often as needed.
Product description
Kuuma Products 120V 11 Gallon Water Heater - Front Mount, Front Heat ExchangeProduct Features and Specs: Capacity: 11 GALLON Part Number: 11841 Dimensions: 16.25 in W x 16.25 in H x 23.25 in D Mount Arrangement: Front-Rear Electrical Input: 120V - 60Hz/1500W Wiring Configuration: L1 & N Heat Exchanger Position/Material: Front/AL T&P Valve Type: 100psi & 210º F, CSA
- New
User questions & answers
Question: | Do these come with an anode rod installed or does one have to purchase separately |
Answer: | The one I have did NOT have an anode rod installed |
Question: | Is there a model with either No engine circulation fittings OR with rear connecting circulation |
Answer: | I don't know you have to ask the company that makes it. |
Question: | what would cause reset button to trip |
Answer: | What reset button? |
Question: | does this water heater come in a 220v for older boats |
Answer: | probably |
Product description
120V - requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2" of foam insulation. Glass lined tank for longer life. 6 year on heater and 1 year on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90. 1. See Info Page for technical and installation specifications.
Manufacturer Contact Information
800-283-3787
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water
User questions & answers
Question: | What is the recovery time if the 7 gallons of hot water is used |
Answer: | I have the 4 gallon tank and it is not too bad for the reheat |
Question: | Can I reduce the pipe's size from 3/4 in to 1/2 in without any negative effect on the unit |
Answer: | No harm to unit.....Max water flow will be reduced a little. |
Question: | Can i use this to replace a small rv hot water heater |
Answer: | Yes, but realize that it's electric and draws quite a few amps, most rv water heaters are propane. |
Question: | The Manual request for the ES8 a 20 Amp breaker and 12GA wire. The wattage however is 1440 with 12 Amps. Why then 20 Amp breaker and not |
Answer: | I would use a 20 amp circuit with 12 ga wire but there are no inrush concerns with a resistive load. A heating element does not have a higher initial current draw like a motor. It draws 1440 watts or 12 amps at 120v. Since 14 ga wire must be fused for 15 amps, this device by itself is already at 80% of the circuit’s capacity. |
Product features
Bosch ThermoTechnology
The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!
Water Where You Need It
Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).
Quality for Long-Life
Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.
Great for Small Spaces
Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.
Minimize Wait Time for Hot Water
Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.
Product description
Camco TastePURE Spring Fresh cleans and deodorizes your RV fresh water systems with a safe, biodegradable formula. Dewinterize any fresh water tank or line. Also good for periodic cleaning, freshening, and deodorizing. Our one step, no measure solution requires no mixing or preparation. 1 gallon of solution cleans up to a 100 gallon tank.
- Required no measuring, mixing, or preparation
- Stops bad odors and foul tastes in your drinking water by cleaning and deodorizing
- Perfect for dewinterizing your fresh water tank and lines
- One gallon cleans up to a 100 gallon tank
- Safe for RV and marine applications
User questions & answers
Question: | Can you leave this in your tank over the winter to make sure mold doesn’t grow |
Answer: | No, this is not a sanitizer, it is good for up to 1 month after mixing with the water. |
Question: | Can this be used to for drinkikg water tank? I’m trying to clean a drinking water tank that has a “water hose” smell and taste |
Answer: | Yes, this is for the fresh water holding tank, but it cleans the entire plumbing system. |
Question: | what are the ingredients |
Answer: | Ethyl Alcohol 64-17-5 < 5% Sorbitan Monooleate Ethoxylate 9005-65-6 |
Question: | Can I use the treated water for showering rather than draining |
Answer: | No. This product is for cleaning out the water system after you winterize it. It also can be used for freshening the water system periodically. You will need to flush the system a couple times after using. If you have any questions please contact us at 800.334.2004. |
Product features
Camco TastePURE Spring Fresh Water System Cleaner and Deodorizer for RV and Marine (40207)
Camco TastePURE Spring Fresh cleans and deodorizes your RV fresh water systems with a safe formula. Dewinterize any fresh water tank or line. Also good for periodic cleaning, freshening, and deodorizing. Our one step, no measure solution requires no mixing or preparation. 1 gallon of solution cleans up to a 100 gallon tank.
- Stops bad odors and foul tastes in your drinking water by cleaning and deodorizing
- Safe for RV and marine applications
- 🎁【CSA Approved Safety 】CSA approved Gasland tankless water heater, safe as per Canadian and US Standard. Flame failure device, anti-freezing protection, over heating protection to ensure the family safety. Automatically decrease water pressure between 2.5-110PSI. The anti-freezing drain plug can discharge the residual water to avoid freezing in cold areas or in case of long time no use. High water temperature protection over 167 °F. Shut off gas supply automatically under unexpectable flameout.
- 🎁【Lightweight Portable Design】 Compact size and lightweight design for easily carry. It can bring a amazing hot shower for you when you are camping, to the beach, etc. Also you can wash your pets with this tankless water heater in outdoor. Hang it using the mounting bracket on the top/back of the gas water heater. It only takes you a few minutes to install it. Or you can install it according to the instructions.
- 🎁【On Demand Hot Water】 Maximum power output 41,000BTU/Hr, get instant endless hot water easily wherever you are. No need to preheat before using tankless water heater. As soon as you turn on the tap, the water flows with your desired temperature. Low water pressure start up, just need 2.5 PSI of water pressure. 1.58 gallons per minute of on-demand hot water. Fully adjustable heat and water flow.
- 🎁【Energy Saving】 Compact and light weight structure with 11.5% energy saving technology. The propane water heater exchanger and main burner are desinged with advanced combustion technology to decrease gas consumption and burning noise. You will save more when you use our tankless water heater.
- 🎁【Excellent Customer Service】We have professional team to offer you excellent service. If you have any question, please feel free to contact us from Monday to Friday.
Product features
WARM TIPS
√ 1、When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking.
√ 2、The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top.
√ 3、A gas leak detection is needed before use and please do not use flame for leak detection. Soapy solution, gas detectors, etc. are recommended to detect leaks.
√ 4、Please use only liquid propane as fuel and use it in a well-ventilated place.
√ 5、Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited.
√ 6、If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger.
√ 7、This water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions.
Outdoor Showers
Enjoying outdoor shower with endless hot water during camping trip.
On demand hot water
No need to preheat before using tankless water heater
Bathing Horses
Offering your horse with a relaxing shower in the afternoon.
Washing Dogs
Providing a comfortable sunbath for your pet dog.
EASY TO USE
Product description
Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.
Manufacturer Contact Information
800-283-3787
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water
User questions & answers
Question: | Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual |
Answer: | The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor. |
Question: | would this be able to supply a shower |
Answer: | A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..) |
Question: | Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank |
Answer: | If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring. |
Question: | When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes |
Answer: | When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible. |
Product features
Bosch ThermoTechnology
The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!
Water Where You Need It
Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).
Quality for Long-Life
Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.
Great for Small Spaces
Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.
Minimize Wait Time for Hot Water
Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.
Product description
1.This diaphragm pressure pump is ideal for use in any area that requires water transfer. Perfect for caravans, boats, motor homes and camping.
2. Easy to operate and self priming it will gives years of service.
3. The mounting feet are rubber instead of rigid plastic, which provides fairly good vibration isolation.
4. Suitable for caravanning, camping, boating , lakes, showers & other purposes
5. Compact and light weight, easy to install with a long lifespan.
6. CE certified - comes with 1 year warranty.
7. We strongly recommend that you get this pump if you have had Camplux gas water heater!
8.There is an arrow on the pump that represents the direction of the water flow.Front side of pump (with explanatory label):The right side of the pump port is the water outlet, and the left side is the water inlet.
9.This 12V rv water pump requires a 2-pin quick disconnect SAE connector cable(Not Include),please prepare it before you purchase this rv pump.
10.For the first time, please fill the inlet and outlet pipes and pumps with water.
Specifications
Model: JK-3206
Voltage : 12V
AMPS:6.0A max
DC Flow capacity : 1.6 GPM/6.0LPM
Water pressure: 65PSI
Item size: 7.4 x 3.9 inch
What's in the Box
1 x Diaphragm Water Pressure Pump
2 x 1/2'' water pipe Joints
1 x installation instructions
Tips
Intermittent work. Built-in thermal protector.A single continuous work 60-90 minutes, cooling 15-20 minutes to work again.
This pump can only be used to transfer water, DON'T connect pump to shower head or toilet outlet directly!
Don't use pump in a flammable environment.
Don't use to pump flammable or explosive fluids, including gasoline, fuel, oil, kerosene.
Inquiry & aftersales service: [email protected] Service hotline: (844)-538-7475
- With CE Certification. Can be used for general water transfer, spraying, circulation, filtration, dispensing, small rain system, gas hot water system.
- Self-priming allows it to be mounted above tank; able to run dry.
- Built-in 65 PSI pressure switch, it automatically turns on and off as you turn your tap or nozzle on and off.Adjustable CUT-OFF Pressure : default 65 PSI, MAX 80 PSI. It doesn't mean 6.0L/min jet at 65 PSI
- 1.6 gallons per minute (6.0 liters per minute). 1/2" male hose thread.
- Application: widely used for garden sprinklers, outdoor shower, water taps in the boat, caravan and motor home. Agricultural spraying for farm chemical, pesticide.
User questions & answers
Question: | I understand the shutoff pressure is set to 65psi (adjustable). What is the turn-on pressure |
Answer: | Yes. But you need to add a filter for the pump. |
Question: | What is the procesure to adjust the shutoff pressure |
Answer: | 110 degrees |
Question: | Can i use this pump for raw sea (lake) water from a seacock to flush the toilet |
Answer: | It depends. How flow/pressure do you want after the 12 foot rise? I use this pump to lift water about 8 feet through high pressure irrigation hose with no problems. At the end of my rise is a low flow application and the pressure switch cycles the pump off/on and I decreased the pressure switch. If you leave the pressure switch alone I am sure you can move water 12 feet up. I would reduce the outlet hose size. Not sure how much flow you will get but it will not be a fire hose for sure. |
Question: | What is the max water temperature the pump will handle |
Answer: | You can use a car battery, or you can buy a 110 to 12v dc converter. |
Product description
Description
A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 5 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections. Serves 3 or more 1/2" (13mm) outlets.
Details
Composed of food grade, FDA safe material. Made for drinking water applications.
Reduces pump cycling
Increases pump life
Reduces strain on plumbling
Reduces strain on battery
Reduces noise of your water system
Allows for better control of hot water
Can run dry
Self-Priming
Can be installed vertically or horizontally
Technical specifications
Ports: 1/2" Barb
Pump Model: SFDP1-055-060-51
Pump Voltage: 12V DC
Pump Flow: 5.5 GPM
Pump Shut-Off Pressure: 60 PSI
Pump Max Amperage: 18.9 A
Accumulator Tank Size: 8L (2.1 Gallons)
FDA food grade material
Air valve: standard tire valve
- 4-Year Warranty!!
- 12V, 5.5 GPM, 60 PSI, 18.9A Max Draw Pump
- Includes Pump, Accumulator Tank, Fittings, and Strainer!
- Run Dry Capable, Self-Priming, Reduces Cycling, Continuous Duty
- Safe Material For Drinking Applications
User questions & answers
Question: | power input location and does wiring to battery come with pump |
Answer: | The power input is on the pump end where the pressure switch is, the system did not come with a wire harness to battery connector. I am using a simple gator clamp harness. |
Question: | Is there a drain plug on the tank and if so what size thanks |
Answer: | There is no drain plug, but you can install the tank vertically and put a tee in the pressure side and install a drain plug or petcock there. |
Question: | Is this setup appropriate for use on a camper trailer |
Answer: | Yes, this product is appropriate for us on a camper trailer. |
Question: | Where is the drain? To prepare for freezing temps is there a convenient drain |
Answer: | The 2 gallon is a pressure tank let the water drain out and then run some rv antifreeze through it |
- 2 PCs 16” long 1/2”FIP x 1/2”FIP,Stainless steel water hoses ,Vent valve,included
- 【NOTE】The cold water pipe has a safety valve, which is marked with a water pressure of 0.75MPa. When the water pressure in your home is greater than this value, the safety valve will automatically drain. At this point, you only need to contact us, we will send you a 0.9MPa exhaust valve, you can solve this problem
- 【SAFE DURABLE & LONGEVITY】Made of stainless steel and never rust,Anti-leakage plug,Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant,This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
- 【SMART INVERTER FOR ENERGY SAVING】Automatic heat preservation and storage of hot water, 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%,Maximum temperature167℉,The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
- 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design,Easy to control warmth.Vent valve, Tee pipeline, pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
- 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time,8-15 minutes to heat to your desired temperature).
- 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 13.0''L x11.4''W x10.6''H; 9.5lbs; 1/2″NPT NPT. 1.5 kW, 110-220 volts. One-year warranty and 24H customer service support, feel free to contact us.
User questions & answers
Question: | How is it that this is energy efficient if it constantly maintains a heating temperature that you can use on demand? Is there an off/on switch |
Answer: | Most rinnai tankless weather it is out door or indoor, have a control board to adjust temp and either on or off |
Question: | I connected the water in the water heater already. But the pressure didn’t pumt the water to the sink |
Answer: | It can definately be out doors in freezing temps, tho power failure arent good for it while in a freeze, tho keep in mind it will use alot more energy for frost protection, indoor units are safer amd more efficient in this case |
Question: | Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink |
Answer: | I bought model V65EN. It came with a wired digital controller. The installer did not run the wire into the house and mount the controller indoors. He simply set the controller at 120 degrees and left the controller inside the unit. If I want to change the temp, I have to take the cover of the unit. |
Question: | Will this work for an outdoor shower |
Answer: | Good place to check for info like this is Wikipedia. Here is what they say: Energy efficiencieseditMore tangible cost savings are defined when comparing the energy efficiencies of gas heaters with low NOx emissions with conventional flued types. Gas heaters with emission problems are flued and inherently lose substantial energies in the form of hot flue gases to the atmosphere. In addition, the choice of placement of flued heaters is greatly impaired due to flue installation restrictions.In contrast, dedicated low emission gas heaters do not require a flue system. Furthermore, with the introduction of oxygen depletion sensors and thermostatic controls, they do not place critical reliance on ventilation as previously was the case. These heaters can be positioned more conveniently and centralised to affect optimum warm air distribution. By definition unflued low NOx gas heaters are 100% efficient as all heat energy released from the flame is converted to useful heat.Hope this helps. June |
Product features
BIS 1.5Kw Mini-Tanks Water Heater Electric
Features
Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.
Endless Hot Water - Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.
Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted,easy to install.
Hot water on call
Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the BISELONG: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the BISELONG can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.
INSTANTLY HOT WATER
As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.
ENERGY EFFICIENT
It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.
KNOB ADJUSTMENT
Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet,Optimal energy efficiency is promised.
GREAT FOR SMALL SPACES
Water heaters are compact,It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.
Latest Reviews
View all
Nitric Oxide For Men
- Updated: 09.01.2023
- Read reviews

Airfryer Oven
- Updated: 12.02.2023
- Read reviews

Nutrimill Electric Grain Mills
- Updated: 16.06.2023
- Read reviews

Corded Electric Shavers
- Updated: 09.07.2023
- Read reviews

Merrell Snow Boots For Kids
- Updated: 03.04.2023
- Read reviews