11 best heating pool costs

Product description

The SunHeater Solar Pool Heater System allows you to capture free heat from the sun’s rays to raise your pool’s temperature. It’s an efficient and cost-effective method to heat your pool that can be used with or in place of your current heater to reduce your pool heating bill. This effective solar powered pool heater utilizes your existing filtration system to push the water through the panel’s many tubes, where it’s warmed by the sun and then returned to the pool. This system can raise the water temperature 6-10 degrees F and extend your pool season by weeks! SunHeater includes a system kit with flex hose adapters for easy poolside installation. It is a universal system that can be used for inground or aboveground pools that are up to 31’ round or 18’ x 36’. Made of durable polypropylene, you can trust this heater to continue working, season after season. SunHeater Solar Pool Heating System will pay for itself in just a season or two and will keep you and your family enjoying your pool for longer. Multiple SunHeater systems can be connected together to produce more heat in less time.

• SOLAR POOL HEATER – The SunHeater Solar Pool Heating System allows you to capture free heat from the sun’s rays to effectively raise your pool water temperature. It’s an efficient and cost-effective method to heat your pool.
• EXTENDS POOL SEASON – Your pool’s pump pushes the water through the panel’s many tubes where it’s warmed by the sun and then returned into the pool. This system can raise the water temperature 6-10 degrees F and extend your pool season by weeks!
• EASY TO INSTALL – This pool solar heater uses your existing filtration system and has 4 end caps, 2 elbows for flex hose connection, 6 stainless steel hose clamps, 1 roll of Teflon tape, and rubber connector hoses.
• TUBE ON WEB DESIGN – The tube-web-tube design allows the SunHeater to capture the most sun possible, maximizing square footage. It offers rigid flexibility, allowing panels to expand and contract with changing temps, giving it the strength needed to last.
• DIMENSIONS – The SunHeater Solar Pool Heater includes two 2’ x 20’ panels, made of durable polypropylene. It’s a universal system that works for pools up to 31’ round or 18’ x 36’.

User questions & answers

Question:	Can I use a submersible pump that generate 10 psi at the solar panel's inlet? 1.5 HP sounds like an overkill and involves high energy to run
Answer:	Given that our pump shows a bit more than 10 psi (four panels, connected in paralell) I can't see why 10 at the inlet won't work. I found these panels worked more efficiently (much higher flow) plumbing two intakes at one end, and one return at the other. There is more pipe involved, but i was able to use my existing Intex pool pump with about 18ft of head on the system.
Question:	I have a 14' x 40' inground pool; would everyone recommend that I buy two of these to go along the entire length of the pool, would one be okay
Answer:	Unless your pool is only 2 feet deep, you definitely need at least 2 panels. I have a 14' x 30' pool and 2 is the correct number for sufficient heating in TX. Rule of thumb, 1 panel for every 5000 gallons of pool. Also, you don't need to run them the length of the pool end to end. I have mine side by side up on top of the roof of my pergola. That way they don't take up as much room. I've also installed them side by side up on the house roof.
Question:	Is this one 4x20 piece or two seperate 2x10 pieces
Answer:	A 4x20 package is two 2x20 panels with a short section of hose to connect them together.
Question:	Are you able to curve it around a pool or must it be straight out
Answer:	The panels actually come rolled up so curving them should not be a problem.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Copper and stainless components
• Lifetime warranty for residential use
• Save up to 60% on your water heating costs with the most advanced, self modulating technology available
• Never run out of hot water with an ECOSMART tankless water heater.

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature.
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter.
Question:	What is the power consumption of this tank-less heater
Answer:	The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly
Question:	remote
Answer:	This unit does not have the ability to have a remote temperature control.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Inground / Above Ground Swimming Pool Solar Panel Heating System 28" X 20'

• XtremepowerUS Panels are built from extremely high-grade materials that are proven to last in all types of weather
• Pools pump and filter system circulates pool water through the SOLAR PANELS when it is heated & then returned to your pool. Once installed, these panels are cost effective, produce no greenhouse gases, and need low to no maintenance. Extend your swimming this year at a low cost with the help from the sun!
• System is designed to be used on above-ground or in-ground pools. Each kit is made of - 2' x 20'ft panels. Each panel is made of lightweight, flexible, durable black polypropylene. The panel tube construction creates a larger surface area which optimizes heat transfer from the sun to your pool
• Quantity of these solar panels needed is dependent on the pool size and the location, which may estimate by some websites.
• Diverter kit may be required for pumps 1.5hp and greater. Sold separately under item number B01FNE41HA

User questions & answers

Question:	Are these panels expandable
Answer:	yes of course, everything you need there at Home Depotbest gds hans
Question:	I am using a low flow solar pump. I think I should remove the baffle and block the flow between sections so water flows up onside and down the other
Answer:	That is exactly what I did. I plugged the hole in the baffle disc and diverted the water into two sections at a time. So I have a total of ten sections and the water travels up two, then back two, then backup two, until it exits. My pump is a 6 gpm solar pump and it works fine.
Question:	How many panels do you receive? Picture shows
Answer:	You receive 2 panels, each with 2 sections, so 4 ribbons. I say this because if this is at an angle it will sag. I squeeze it between 2 boards at various points because I have it at an angle on a rig above the ground.
Question:	How many HP does your pump have to be for this solar heater
Answer:	I used two of these on my 10,000 gallon pool. I did not use my 1hp pool pump ( I did not want to run it for 8 hours a day). I set up a small 250 GPH utility pump to circulate water. I run it for 8 hours a day at a cost of about 15 cents a day. The incoming temp was about 75- outgoing about 100. It resulted in a raise of total pool temp of about 8 degrees. The HP of the circulating pump does not make a difference. Only a set amount of Sun energy can be transferred to the water based on the sq. footage of the panels, amount of sun and hours per day of circulation. The HP or GPH will not make a difference as long as you are circulating water through the panel.

Product description

Smart pool Sun Heater 2 feet - 2' feet x 20' feet (80 sq. ft.) Solar Heater for most Above Ground Pools.

• Keep your pool warm with a polypropylene heat collector
• Solar heater features 80 square feet of solar panels
• Pool accessory is perfect for heating any aboveground swimming pool
• Panel array measures 4 feet wide x 20 feet long

User questions & answers

Question:	What is the maximum amount of gallons that this pool heater will warm up? Also, by how many degrees
Answer:	1 box of the S421P panels will heat up to 31ft round aboveground pool or 18'x36' oval pool. It can heat it up to as much as 15 degrees. SPQ Brands
Question:	can this be used to heat a [4 person] hot tub to a comfortably HOT temperature
Answer:	No. It only increases the temperature 6-10 degrees. If the water is hot then it may retain the heat & increase a little but would not be good as a main source of heat.
Question:	Did you use one or two panels
Answer:	We used 2 panels
Question:	what all is included in the purchase? hoses? clamps
Answer:	I purchased the kit with 2 solar panels. It comes with pvc caps for one end of the panels. A rubber hose to connect the two panels together on the other end, as well as hose clamps. 2 pvc fittings for input and output flow to the panels. These are made to connect the filter hose to the panels. (although we bought new fittings to use all pvc pipe) It doesn't have any mounting hardware or rack to mount the panels to. So don't expect to have everything you will need. The picture on this ad shows more than what you will get. But performance of this heater has been very satisfying

Product features

Enjoy Free Heat From The Sun!

Extend your swimming season using free heat from the sun with the SunHeater S421 solar heating system for above ground pools!

Product description

Eco Smart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why Eco Smart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self-modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home.Take a look at our full line of tankless water heaters below to see what's perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!. Required Wire: 4 x 8 AWG

From the Manufacturer

Ecosmart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why EcoSmart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home. Take a look at our full line of tankless water heaters below to see whats perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!

• Sleek and compact design with digital output temperature display
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• Manufactured in United States
• Pipe Fittings:3/4 inch NPT
• Required Breaker:4 x 40 A
• 150 A

User questions & answers

Question:	What model is recommended for whole house
Answer:
Question:	I live in lower michigan and what model is recommended for whole house
Answer:
Question:	Why are these so much less expensive than other name brand tankless heaters
Answer:
Question:	Even with 200 amp. My lights flicker with the water is in use. Any one having the same issue and how was the issue resolved? Thanks
Answer:

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The "One & Only" Patented Circulator combines superior performance and durability, to give you the "Fastest Automatic Heat and Chemical Distribution System" for your pool. There is nothing like it on the market today. This powerful, 360-degree rotating water jet gives your pool total circulation -- replacing all fixed wall returns that only give you water flow to just a spot in one direction. The patented Circulator has gained recognition for more than eight years, when it was developed and tested by a renowned NASA fluid engineer. The latest technology in complete water circulation, the Circulator is revolutionizing the swimming pool industry by replacing all fixed return fittings with thrusting water up to 15 foot in a circular motion, covering the entire pool. With the use of the Circulator in every wall return, you can virtually eliminate dead or cold spots, cloudy pool water and algae, with deep heating and energy savings as an added bonus. Super easy to install, The Circulator fits in all pools worldwide – above-ground pools, vinyl pools, fiberglass pools, and concrete pools. For unique pool returns, we supply excellent customer service (24 hours a day, 7 days a week), with a 45 year veteran pool professional to help you easily adapt The Circulator to your pool. (A different adapter may be needed.) Work less, enjoy more, and save money while The Circulator is working hard for you. Note: You may need an adapter for your particular pool return. We can hand-make an adapter for you at a very small cost.

• Helps to virtually eliminate Cloudy Pool Water and Algae with powerful circulation throughout your entire pool
• Heats your pool twice as fast with no uncomfortable cold areas - save big on heating costs or heat your pool for free with passive solar heating
• Save Electricity - run your pool pump 1/3 less time and prolong the life of your pool pump
• Save money on costly chemicals as they work much more efficiently giving you a healthier pool
• Works automatically with easy installation in virtually all pools worldwide making your pool maintenance much easier so you save time and money
• The Circulator will fit all pools worldwide – with or without an adapter.

User questions & answers

Question:	Would this help keep algae away if I don't use chemicals and only use salt and baking soda
Answer:	If they are little pen needles yes
Question:	Can you use in above ground pools
Answer:	Don't know. Contact the company
Question:	Will this jet cause the pressure to go up in the plumbing? If so how much
Answer:	Hi I use mine while on a boat scuba diving. It works great. Ice packs have sleeves to slide your ice packs in. Plenty of room! I hope my answer helps. Take care.
Question:	Does it do well in salt water pools
Answer:	I use this bag for the same thing and it works every time. It holds the pen, needles and alcohol wipes.
Question:	is this case fda approved
Answer:	Not sure this will help, but I use it for eye drops that stay frozen and than get used. It is a very small container that the drops come in, so I just put them in between 2 ice packs inside the folded part, although I used all 4 ice packs. The entire pack stayed fine for about 16 hrs.
Question:	How long does the insulin stay cold
Answer:	Well, this product will keep that temperature for at least 12hrs, but everything depends on the outside temp.

Product features

Yarwo Insulin Cooler Travel Case

FEATURES

• Thick padding reduce the damage of bumping.
• Main compartment with elastic band to hold medication supplies.
• Mini size is perfect for insulin dependent daily use.

DIMENSIONS 7.4 x 3.1 x 1.1 inches

PACKAGE INCLUDED

1 x Yarwo Insulin Cooler Travel Case

2 x Ice Pack

(CASE ONLY, INSULIN PENS AND SUPPLIES NOT INCLUEDED)

Keep Insulin Cool

• Aluminum foil material keep your diabetic supplies cool for a long time.

Easy to Carry

• Carabiner clip makes it easy to hook on to a belt loop or backpack for outdoor using.

How to Use Ice Pack

• Put the ice pack in the freezer about 7-8 hours before using. Then put it in the mesh pouch of Yarwo insulin travel case.

Product description

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation.

From the Manufacturer

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation

• Set the knob on the front cover and enjoy water temperatures between 86DegreeF (30DegreeC) and 125DegreeF (52DegreeC)
• The three years parts warranty is unique in the industry
• Due to its small dimensions and attractive housing the DHC-E can be left unconcealed in many applications

User questions & answers

Question:	The Item Weight is 50 pounds
Answer:	Out of box, no stamping, thus don’t know
Question:	The description says this unit is swicthable between7.2 kw and 9.6kw, can it be set at 8kw? much obliged
Answer:	Yes it does. About 4 feet with connectors and Teflon tape.
Question:	Is 6# gauge wire thick enough for 9.6KW setting
Answer:	Hello Tulsa, Thanks for reaching out. Please be noted the max. working pressure for this reel is 300psi.
Question:	does the dhc-6 unit self drain/how do you drain for the winter
Answer:	Instructions say not to open casing but it can be opened

Product features

Simple, Reliable Hot Water Right at the Sink: DHC

DHC can deliver warm or hot water to a single point-of-use, usually a hand wash or utility sink. Please view the Sizing Guide images above in the image detail view for more information.

The heating element is controlled by a flow switch which means a DHC can never dry-fire and fail prematurely. And since all DHCs are hydraulically controlled, operation is quiet. DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.

The simplicity and reliability of the Stiebel Eltron DHC tankless water heaters make them ideal point-of-use water heaters for these residential applications:

• Bathroom Sinks
• Kitchen Sinks
• Utility Sinks
• Laundry Areas
• Boats / RVs

And they are ideal for restrooms or kitchenettes in these office or commercial / industrial settings:

• Office Buildings
• Gas Stations
• Stores
• Schools
• Malls
• Hotels / Motels
• Warehouses
• Commercial Condominiums
• Restaurants
• Manufacturing Facilities

Electronic Accuracy: DHC-E

DHC-E can deliver hot water to a single sink, multiple sinks, or in certain conditions, low-flow showerheads. Please view the Sizing Guide images above in the image detail view for more information.

Control temperature simply by setting a dial

Set the temperature knob on the front cover, and enjoy water between 86–140 °F (30–60 °C). Change the desired temperature at any time. Advanced microprocessor technology ensures that the water temperature doesn't deviate from the set point even if flow varies.

Sleek Design & Constant Temperature Output

DHC-E models have our exclusive Electronic Temperature Control. Stiebel Eltron Electronic Temperature Control compensates for fluctuations in the flow rate and the incoming water temperature to maintain a constant water temperature output. Our smart microprocessor technology continually monitors info from the flow sensor & two temperature sensors & micro-adjusts the heating elements, saving power.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 1 point of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3. 0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1. 5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

• The 220V ECO 11kW unit is ideal for 1 simultaneous points of use in US Southern Regions where the incoming water temperature is above 70°F. In colder regions, it is suitable for a sink at 1. 3 GPM.
• German-designed with high quality stainless steel water channel and heating chamber.
• SMART Technology: Easy management and simple adjustments on a LCD Panel allows you to program the exact desired water temperature thereby optimizing electricity consumption.
• Requires 60 Amp breaker and must be installed by a professional plumber or electrician to ensure safety and quality.
• Marey’s ECO line can maintain 98% efficiency level throughout their lifetime.

User questions & answers

Question:	How to instal it
Answer:	Hello Domingo. Complete installation instructions are on the official manufacturer's owner's manual here https://gadgetsgo.com/images-manual/Marey-Eco110-2016_12_27_manual.pdf GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	What is the fitting for the pvc inlet and outlet
Answer:	Hi Judy. PVC should not be used for the hot water connection. Instead use copper, CPVC, or other high-temperature rated pipe. You may use PVC for the cold water connection. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	can i use a double 25 amp *50 amps
Answer:	I think it takes a 60 amp
Question:	What size is the out put line
Answer:	Hello Cindy. Both water inlet and outlet connections are 1/2" NPT. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo

Product description

V65eP is the perfect combination of high efficiency, comfort and value in a propane gas tankless water heater from Rinnai. Ideal for small to medium homes or remodels, compact, easy-to-install, reliable and perfect for outdoor locations; Rinnai products provide peace of mind with warranties that surpass the competition.

From the Manufacturer

Rinnai's V65E exterior-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You'll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.

• Endless hot water for your entire home
• V65eP HE High Efficiency Tankless Hot Water Heater - Propane: Outdoor Installation Only
• Up to 6.5 GPM hot water flow rate (varies by groundwater temp)
• Control-R 2.0 mobile app features timers and schedules throughout the day and allows you to remotely put the system into vacation mode.
• Residential Factory Warranty - 120 months (heat exchanger), 12 months (labor), 60 months (parts)

User questions & answers

Question:	Can the temperature output be adjusted to 105F
Answer:	Most rinnai tankless weather it is out door or indoor, have a control board to adjust temp and either on or off
Question:	Can I use the Rinnai V65EP in Denver, Co? Temperatures during the winter can get below zero
Answer:	It can definately be out doors in freezing temps, tho power failure arent good for it while in a freeze, tho keep in mind it will use alot more energy for frost protection, indoor units are safer amd more efficient in this case
Question:	Does this unit come with controller? rinnai tech said i needed a mc-91-2us controller? do i need to buy separate
Answer:	I bought model V65EN. It came with a wired digital controller. The installer did not run the wire into the house and mount the controller indoors. He simply set the controller at 120 degrees and left the controller inside the unit. If I want to change the temp, I have to take the cover of the unit.
Question:	What does the "Low NOx Mean
Answer:	Good place to check for info like this is Wikipedia. Here is what they say: Energy efficiencieseditMore tangible cost savings are defined when comparing the energy efficiencies of gas heaters with low NOx emissions with conventional flued types. Gas heaters with emission problems are flued and inherently lose substantial energies in the form of hot flue gases to the atmosphere. In addition, the choice of placement of flued heaters is greatly impaired due to flue installation restrictions.In contrast, dedicated low emission gas heaters do not require a flue system. Furthermore, with the introduction of oxygen depletion sensors and thermostatic controls, they do not place critical reliance on ventilation as previously was the case. These heaters can be positioned more conveniently and centralised to affect optimum warm air distribution. By definition unflued low NOx gas heaters are 100% efficient as all heat energy released from the flame is converted to useful heat.Hope this helps. June

Product features

Endless Hot Water

Put an end to scheduling your hot water need.

• Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.

Hot Water On-Demand

Don't waste while you wait.

• Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
• While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.

Save Valuable Space

Your hot water heater doesn't have to be a behemoth!

• Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
• Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.

Affordable, Efficient Savings

Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.

• Use 40% less energy than traditional tanks* because you heat water only when you need it.

100 years of Confidence

Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.

• Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
• Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.

Sustainable Reliability

It's a smart investment for now and the future when you intertwine sustainability and reliability.

• Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
• Average life expectancy is 20 years vs. 8-10 for a traditional tank**
• With this premium product, you'll save–both money and worry–in the long run.