12 best gas pool heaters
Gas pool heaters are a type of heating system used to warm up swimming pools and extend the swimming season.These heaters are commonly used in both residential and commercial settings where maintaining a comfortable water temperature is essential. Here are some key points about gas pool heaters:
Operation: Gas pool heaters use natural gas or propane as their fuel source. They work by burning the gas in a combustion chamber, which then heats up a heat exchanger. Water from the pool is pumped through the heat exchanger, where it is heated before returning to the pool.
Efficiency: Gas pool heaters are known for their quick heating capabilities. They can raise the water temperature rapidly, making them ideal for situations where you want to enjoy the pool on short notice. However, they are not the most energy-efficient option available, and their operational costs can be relatively high compared to other heating methods.
Size: Gas pool heaters come in various sizes to accommodate different pool sizes and heating requirements. It's important to choose a heater with an adequate BTU (British Thermal Unit) rating to match your pool's volume and desired temperature rise.
Installation: Proper installation is crucial for the safe and efficient operation of gas pool heaters. They should be installed by qualified professionals who can ensure that all safety regulations are followed.
Maintenance: Regular maintenance is essential to keep a gas pool heater in good working condition. This includes cleaning the burners, inspecting the gas lines, and checking for any signs of wear or corrosion.
Cost: Gas pool heaters typically have a lower upfront cost compared to other heating options like heat pumps or solar heaters. However, their ongoing operational costs can be higher due to the cost of natural gas or propane.
Environmental Impact: Gas pool heaters produce greenhouse gas emissions due to the combustion of fossil fuels. As a result, they are not considered the most environmentally friendly heating option for pools.
Safety: Safety is a paramount concern when using gas pool heaters. They should be installed and operated in strict accordance with safety guidelines to prevent accidents and carbon monoxide leaks.
In conclusion, gas pool heaters are a common choice for quickly heating swimming pools, but they may not be the most cost-effective or environmentally friendly option in the long run. It's essential to consider factors such as pool size, desired temperature, and budget when selecting a pool heating system. Additionally, proper installation and maintenance are key to ensuring the safe and efficient operation of gas pool heaters.
Below you can find our editor's choice of the best gas pool heaters on the marketProduct description
Hayward’s Universal H-Series 1400,000 BTU Propane Gas Pool & Spa Heater provides reliable, long-lasting comfort. Built with a durable cupro nickel heat exchanger, it offers exceptional protection against corrosion and premature failure caused by unbalanced water chemistry, ensuring you get season after season of premium heating performance. The Universal H-Series boasts industry-leading hydraulic performance coupled with lightning-fast speed-to-heat capability—giving you less time to wait and more time in the water. Its low NOx emissions meet air quality standards in all low-NOx areas, so you can rest easy knowing its environmental impact is low, too.
- The Hayward Universal H-Series 400,000 BTU Propane Heater delivers premium heating performance for years of reliable, long-lasting comfort
- A durable cupro nickel heat exchanger offers exceptional protection against corrosion and premature failure caused by unbalanced water chemistry
- Industry-leading hydraulic design reduces circulation pump run time to provide major energy savings
- Front-panel-only access and intuitive control pad provide easy operation, service and maintenance
- Low NOx emissions meet air quality standards in all low-NOx areas, ensuring low environmental impact
User questions & answers
Question: | gas consumption of the model 150, per first hour running at full capacity |
Answer: | I have the 250 - it uses a lot of propane. I go thru about 5-10lbs per hour. I am heating my water to 85 degrees |
Question: | How long would the 150,000 BTU take to heat only our attached hot tub |
Answer: | We heat our pool which is 26,000 gallons 1-2 degrees and hour. We are very happy with it! |
Question: | Is it worth the time and money to rebuild my 10 year old h250ped2 or buy a new one |
Answer: | Buy a new one. They are so much more efficient. I worked on my old pool heater until it caught fire. The new one is so much safer and problem free. |
Question: | Does this heater come with any warranties |
Answer: | Theoretically, yes, BUT getting Hayward to honor them is very, very, VERY nearly impossible. Had I not bought from a retailer where I was able to reach a live person who then went to bat for me, I would have been left with Hayward shrugging and saying they had no warranty providers in my STATE. Seriously. (I have to say that, had I known then what I know now about Hayward propane heaters, I would have stayed with my prior electric pool heater and spent the money switching over my hot water heater to gas instead.) |
Product features
Universal H-Series Propane Heaters
An efficiently heated pool or spa lets you control your swim season and provides luxurious comfort that fits your lifestyle. Universal H-Series heaters from Hayward offer hydraulically efficient solutions for any pool or spa. They also are environmentally responsible because of their low NOx emissions so you can enjoy efficient luxury and peace of mind - season after season.
Cupro Nickel State-of-the-art Finn Plate Heat Exchanger
Only Hayward constructs ALL heat exchangers of highly resilient Cupro Nickel for greater durability and longevity even in salt-based, high flow or aggressive water chemistry conditions.
Superior Hydraulic Performance and Reliability
Patented polymer header design provides superior hydraulic performance to save energy and protect against the damaging effects of erosion from high flow conditions to further improve reliability.
Forced Draft Combustion System
The Forced draft combustion system constantly moves air through the combustion chamber at a precise flow rate, eliminating all outside weather variables that can affect heating performance, such as high wind conditions.
L.E.D. Digital Control Panel
Intuitive and easy to read L.E.D. Control Panel provides digital temperature readout, diagnostics and electronic 'lock-out' of temperature set-point. Digital control accuracy saves time and money getting the pool to the perfect temperature.
Product description
The Raypak Swimming Pool/Spa LCD 406,000 BTU Natural Gas Heater with Cupro Nickel has everything a pool owner needs to have reliable and efficient pool heating. Not only does this Raypak heater maintain thermal efficiency above 83 percent and utilize its Unitherm Governor to keep water temperature above 105 F, it consistently exceeds the highest state and federal efficiency standards. In addition, the Raypak includes digital control with LCD display for temperature selection and heater settings, and is diligently designed with high quality materials to stand up to wind and changing climate conditions. For the best in pool heaters, look no further than the Raypak Swimming Pool/Spa LCD 406,000 BTU Natural Gas Heater with Cupro Nickel.
- Constructed with the highest quality integral Cupro nickel fin tube available which helps the unit stand up to the harshest of applications, like low pH, high flow or heavy use
- Digital control with LCD display for temperature selection and heater settings
- Capron resin headers prevent rust stains from harming pool surface
- Plumb directly from provided 2 inch PVC threaded union
- Smart microprocessor controls diagnostic read out and continuously monitors operating status
User questions & answers
Question: | Has anyone had this model for a while and can lmk if it’s reliable & or problems? raypak 406,000 btu digital gas pool heater w/ cupro nickel |
Answer: | We have had the heater for about 4 months and it works great. Heats the jacuzzi twice as fast as the old heater which is the same model but much older. Love it. |
Question: | will this unit replace my m336A hat. gas heater? Saltwater pool |
Answer: | Chances are you are in luck. I replaced a LAARS Lite 2 335k BTU Natural Gas heater with the 406k BTU Raypak heater. Connections were essentially the same although I took the opportunity to replumb my system and improve the foundation for the heater. I was pleased to learn by a qualified gas plumber that made the final connections that I did not have to increase the size of gas line feed. As I was unhappy with the metal rot in my old heater, I recently completed a simple roof over the unit to reduce precipitation from the unit, and I elevated the unit a few inches on a concrete foundation. I also addressed drainage to ensure no water sat on the unit, internally or otherwise. The Raypak is conditioned for weather, so this my be overkill, but the investment is significant and I felt the unit should receive best care to last over ten years. All that said, the unit works wonderfully, heats my 30,000 gal in-ground pool quickly, and has reduced the cost of maintaining the pool during normal use season. The controls on the unit are such that the unit heats too the desired temperature, then shuts off. A fireman's switch on the pump shuts the heater down 15 minutes before the pump shuts down, so I could improve the programming significantly over the LAARS unit. Best always, Drew |
Question: | Can this unit be used in a salt pool |
Answer: | I just converted my pool from chlorine to salt this season. The heater is working fine. |
Question: | What are the voltage & amps requirements |
Answer: | From the manufacturer: The Electronic Intermittent Ignition Device automatically lights the pilot and main burners upon a call for heat. The heater is supplied with a dual-voltage transformer for 120 VAC or 240 VAC input power hookup. When operating on 120VAC power, the 206A-406A units draw 4 amps. When operating on 240VAC power, the 206A-406A units draw 2 amps. WARNING: Heaters are factory-wired for 240 VAC power supply. DO NOT attempt to operate at 208 VAC. |
Product description
Swimming Pool fit for Thermostat 240V Pool fit for Thermostat Heater 3KW Pool SPA Bath Hot Tub Electric Water Heater fit for Thermostat
Introduction:
Fit for Thermostat is designed specifically for the needs of the Jacuzzi, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation:
The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user.
P.S:Please refer to the instruction manual for specific installation procedures,thank you !!
Note:
Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less.
The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents.
Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install.
Package Content
1 x Water Heating Thermostat
2 x Interface
1 x Manual
- Note:It is 240V 3KW,only made for US.1.【Automatic Heating】This thermostat is designed specifically for the hot tub, adopted Flow Temperature Sensor TechnologyThe sensor is always under the control of the single-chip microcomputer to accurately and timely monitor the temperature status of the entire heating system and the flow.the water temperature bath maintained at 22-50 degrees Celsius, give your Jacuzzi to create a more comfortable environment
- 2.【Intelligent Self-checking System】Comprehensively monitor the operating status of the system, and quickly make appropriate judgments and displays, thereby avoiding poor water flow, dry fuel and other failures in the absence of water, and more convenient for the user or maintenance personnel to judge and maintain the fault.
- 3.【High Quanlity】The heating thermostat liner material is 316# stainless steel and the electric heating tube provided by Duan Baker Company which has good corrosion resistance (chlorine corrosion).
- 4.【Multiple Protections】The Pool Heater has multiple protections, safety and reliability - over-current, ultra-high temperature, short circuit to the power supply line, and water flow protection.
- 5.【ST Series Pool Heaters】 special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating.This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch,it improves greatly of trouble free in working time, adaptability of water environment and stability.
User questions & answers
Question: | Cómo funciona en una red de 110v |
Answer: | The little ones don’t but are great |
Question: | For what size pool and how many gallons of water will it heat |
Answer: | I don't think it's a problem with newer TVs they don't have an actual picture tube.I have it under my 58 inch Samsung and it touch the bottom with no problem. |
Question: | Does this also act as a pump |
Answer: | Get one with large amp or get a separate amp at least 200 wpc. I'd go for the biggest amp you can afford if you want the best sound. AVR recievers have a hard time powering these. They do ok on my Onkyo txrz820 130wpc 2 channels driven, but they do way better with my 400wpc amp |
Question: | Will a 1000GPH intex pump provide enough flow for this heater |
Answer: | ( SL-28`s ) Each one is H-33.9'' W-9.8'' D-12.2'' , Buy 2 for stereo quaulity for your system .Me , im buyin a pair bout a week 1/2 . I really like the Cerwin Vega brand . |
- On-Demand Tankless Water Heater-Camplux advanced 5.28 GPM high efficiency flow control natural gas tankless water heater delivers 5.28 gallons per minute of on-demand endless hot water to suit medium- and smaller-sized homes. Automatically activates on water pressure between 7.0-150 PSI.
- Constant & Sustainable Hot Water Solution -CSA certified balanced combustion design ,features with over-high wind pressure safety protection,Ipx4 water resistant protection, over-loaded electric protection,fan failure protection, equipped with PCB start up self-test &real-time intelligent monitoring, timely warning of potential gas fire and hydro power to ensure your family's safety.
- Affordable & Efficient Savings -PCB frequency conversion intelligent control, temperature intelligent adjustment, environmental protection and durability, truly outstanding energy saving. Man-machine dialogue, heating without waiting. This residential constant model saves time, money and energy while producing safe, endless hot water for whole home at an affordable rate.
- High Thermal Efficiency & High-Rise Wind Resistance-Phosphorus deoxidized copper heat exchanger with high temperature and corrosion resistance technology for full combustion and high thermal efficiency up to 92% . It can resist grade 8 wind speed and 240Pa high anti-wind pressure. Additionally, a wind pressure sensor is added to perceive the external wind force in real time and automatically adjust the fan, flame and maintain stable combustion.
- Considerate Customer Service -Here at Camplux, customer service is everything! We offer 24 shift hours customer service make the customer experience easy and fast through our live chat, phone support & our online helpdesk. Have a question? Give us a call at (844) 538-7475.
User questions & answers
Question: | Can this be mounted in an attic |
Answer: | The heater will work fine. The only thing you may notice is a lower discharge temp coming from the heater. This will be caused by the water moving faster through it. Should heat just fine though. |
Question: | What is the btu of this unit |
Answer: | Yes, the cord plugs into 110V power |
Question: | How many amps of current does this unit pull from the power plug |
Answer: | The pipe connection to this unit is 3/4 inch. However because of friction in the pipe that connects to unit to the gas meter must be sized to allow the gas to flow unrestricted to the heater. long runs may require 2" most residential application will do fine with 1-1/2 in supply. Find a LOCAL POOL PLUMBING Contractor to assist you. Gas piping has several unique requirements. ie heat fused couplings, plastic to steel transition fittings, locating trace wire buried with the line and a few other small requirements, like a shut off in the line at the heater, and must be leak tested under pressure. To recap, The higher the BTU the bigger the pipe, the further you go the bigger the pipe. Fun FACT, natural gas is regulated at only 3/4 psi, that's why you can stop it with you thumb. |
Question: | does it need filters |
Answer: | Yes natural gas. |
Product features
Features-
- The Camplux WA528 produces comfortable instant & constant endless hot water for residential whole families use!
- Features PCB frequency conversion intelligent control, temperature intelligent adjustment ensures comfortable constant hot water.
- Features CO multiple protection ensures safety, equipped with PCB start up self-test &real-time intelligent monitoring, timely warning of potential gas fire and hydro power to ensure your family's safety.
- Automatically activates on water pressure between 7.0-150 PSI, maximum power output 150,000Btu/Hr. Hot water output 5.28 gallons per minute, perfect for a hot shower for whole home!
- The Camplux tankless gas water heaters are not recommened to use for elavation above 2000 feet / 600 meters.
Camplux 5.28 GPM Residential Tankless Water Heater
- Powered by 120 VAC voltage, features imported PCB with precise temperature control.
- Safe electronic ignition system,anti-freezing protection,flame failure device and dry combustion protection.
- Automatically activates on water pressure between 7.0-150 PSI.
- CSA certified balanced combustion design required air combustion.
- PCB frequency conversion intelligent control ensures smart& energy saving.
Enjoying Comfortable Constant Hot Shower with Camplux 5.28 GPM Tankless Water Heater
The 5.28 GPM Camplux residential tankless water heater supplys on-demand comfortable constant hot water for residential whole home use. It is powered by 120 VAC voltage, has an imported PCB, precise temperature control, double adjustment of water and air, and rising of the third gear making it perfect for constance hot shower at home! The ideal operating range for the 5.28 GPM Camplux residential tankless water heater is 7.0-150 PSI. Camplux tankless water heater focus on phosphorus deoxidized copper heat exchanger with high temperature and corrosion resistance technology and advanced multiple protection systems to ensure your safety.
Compact & Wall Mounted Design
Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.Save valuable space for attic small suite, your hot water heater doesn't have to be a behemoth!
Constant & Sustainable Hot Water
CSA certified balanced combustion design,features with over-high wind pressure safety protection,Ipx4 water resistant protection, over-loaded electric protection,fan failure protection.
Affordable & Efficient Savings
PCB frequency conversion intelligent control, temperature intelligent adjustment.This residential constant model saves time, money and energy while producing safe, endless hot water for whole home at an affordable rate.
Product description
Extend your swimming season with the Kokido Keops Solar Dome Above Ground Pool Water Heater. Swimming doesn't have to end because summer is over, this cost effective, environmentally friendly pool heater works by connecting between your filter pump and pool return. It is compatible with most above ground pools and includes 4 foot hoses, fittings, and stainless steel clamps. This heater dramatically reduces pool heating costs and has an integrated rack that helps set up an optimal angle for the heater to receive maximum sun exposure. You can attach additional heaters for larger swimming pools. With this Kokido Keops Solar Dome Above Ground Pool Water Heater, you can just keep swimming, just keep swimming, just keep swimming.
- Don't let summer's end keep you from swimming, this Kokido Keops Solar Dome Above Ground Pool Water Heater lets you swim on into the cooler months of the year
- Extend your swimming season with warm water and heat your pool to a warm, comfortable temperature
- Environmentally friendly heating energy
- Dramatically reduces or eliminates pool heating costs compared with gas or electrical heater
- Includes a protective cover for storage purpose when not in use
User questions & answers
Question: | What is the diameter of the solar heater hose? I need to connect it directly to a garden hose, using adaptors |
Answer: | 11/2 |
Question: | Could I use this to heat a small greenhouse |
Answer: | Yes you could. You'd have to devise the system to suit your needs though. Pump water from ten 55 gallon drums of water, though the solar collector and back, would heat up those drums all day. At night, the heat would radiate out and that bank of energy you store in the day might be what you require at night. But nobody knows your needs like you do, so you would decide. I just threw out one idea... |
Question: | Dumb question but I guess you have to run your filter a lot for this to work? Intex doesn't recommend running the filter while you are in the pool |
Answer: | I live in Connecticut. At the beginning of the season I ran it all day. You are probably right the more you run it in daylight the more heat it generates. I did not need it mid or late summer. I was happy with it, a few more degrees warmer in the pool is a lot more comfortable. |
Question: | Does it come with a pump? If not, what kind of pump is recomendd |
Answer: | This does not come with a pump. It is a passive solar collector and needs to be set up in conjunction with your existing pool pump or a dedicated circulator pump. |
Product description
The Raypak Digital Natural Gas Heater is engineered to last. Looking at the heater, you can see that it's designed differently than most heaters on the market. The Raypak Digital Natural Gas Heater's unique "pagoda design" enables the heater to stay effective during high wind speeds and downdrafts. The cabinet of the heater is constructed from a galvanized metal, then powder coated with a 7 stage process to outlast the elements and corrosion. Inside the unit, the heater boasts polymer resin
- LCD digital display provides accurate temperature
- Monitors operational status as well as service diagnostics
- High-wind resistance
- Corrosion-resistant headers
- Unitherm governor prevents condensation
User questions & answers
Question: | How much did your gas bill rise |
Answer: | went from a 20 y/o Raypak 185,000 BTU to a 266,000 BTU a year ago. Much better heating time and high efficiency. Natural gas cost same as before due to efficiency and quicker water heat up time. |
Question: | Does this heater work at an altitude of 5000 feet |
Answer: | No, on their website it states it is for elevations 2000ft or less. |
Question: | Is this the digital model? I see in the description something about a mechanical thermostat; don't want the pilot light, want the electronic ignition |
Answer: | I think I recall seeing that also. But the thermostat is totally digital. I'm not sure if has pilot light I'm not home or I would take a look. I don't recall lighting one and it does everything automatically. I just set the temperature and forget it. This is a great heater. |
Question: | do they make this model with intake & outtake on left side instead of right side |
Answer: | Hi, you can switch it the other way around, thanks, |
- 🎁【CSA Approved Safety 】CSA approved Gasland tankless water heater, safe as per Canadian and US Standard. Flame failure device, anti-freezing protection, over heating protection to ensure the family safety. Automatically decrease water pressure between 2.5-110PSI. The anti-freezing drain plug can discharge the residual water to avoid freezing in cold areas or in case of long time no use. High water temperature protection over 167 °F. Shut off gas supply automatically under unexpectable flameout.
- 🎁【Lightweight Portable Design】 Compact size and lightweight design for easily carry. It can bring a amazing hot shower for you when you are camping, to the beach, etc. Also you can wash your pets with this tankless water heater in outdoor. Hang it using the mounting bracket on the top/back of the gas water heater. It only takes you a few minutes to install it. Or you can install it according to the instructions.
- 🎁【On Demand Hot Water】 Maximum power output 41,000BTU/Hr, get instant endless hot water easily wherever you are. No need to preheat before using tankless water heater. As soon as you turn on the tap, the water flows with your desired temperature. Low water pressure start up, just need 2.5 PSI of water pressure. 1.58 gallons per minute of on-demand hot water. Fully adjustable heat and water flow.
- 🎁【Energy Saving】 Compact and light weight structure with 11.5% energy saving technology. The propane water heater exchanger and main burner are desinged with advanced combustion technology to decrease gas consumption and burning noise. You will save more when you use our tankless water heater.
- 🎁【Excellent Customer Service】We have professional team to offer you excellent service. If you have any question, please feel free to contact us from Monday to Friday.
Product features
WARM TIPS
√ 1、When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking.
√ 2、The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top.
√ 3、A gas leak detection is needed before use and please do not use flame for leak detection. Soapy solution, gas detectors, etc. are recommended to detect leaks.
√ 4、Please use only liquid propane as fuel and use it in a well-ventilated place.
√ 5、Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited.
√ 6、If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger.
√ 7、This water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions.
Outdoor Showers
Enjoying outdoor shower with endless hot water during camping trip.
On demand hot water
No need to preheat before using tankless water heater
Bathing Horses
Offering your horse with a relaxing shower in the afternoon.
Washing Dogs
Providing a comfortable sunbath for your pet dog.
EASY TO USE
Product description
Raypak 014784 - 156A Natural Gas Pool Heater is 150,000 BTU and uses 120V or 240V for installation. This unit is rated for 0-4999ft Elevation and uses corrosion Polymer Headers. The Raypak 156A is the perfect choice for above-ground pools and spas. Raypak is the only manufacturer of this size heater to use all the engineering and components utilized in our bigger gas heaters. The unit is fully serviceable and built for years of operation. This may be our smaller sized pool and spa heater, but
- Polyester-Coated, non-corrosive external cabinet for added durability.
- Doesn't require fans to combat drafting problems.
- Polymer headers prevent rust stains on your pool or spa surface.
- All-Copper-Fin-Tube Heat Exchanger. Made from a single piece of extruded copper.
- State of the art diagnostic reporting and fault recording.
Product description
This PC board control kit is designed for use with Digital Gas Heater. Features a 2-line 16 character LCD display with plain text diagnostics. It has improved flame sensing capabilities, an internal fuse and a service menu to aid in troubleshooting and maintenance. It is the first ever flame signal strength indicator that is graphical and It is easy to use. This new sensing and diagnostic capability will help reduce unnecessary parts change outs. It has the ability to monitor the 24-Volt power supply and provide useful diagnostic feedback. Packaged with an extensive list of parts, the kit includes a PC control board and a remote wire harness, designed as a seven pin plug. It also includes an LCD gasket for added protection against water damage and five #6 by 3/8-inch screws for installation.
- PC board control replacement kit
- For use with Digital Gas Heater
- Features a 2-line 16 character LCD display with plain text diagnostics
- Improved flame sensing capabilities, an internal fuse and a service menu to aid in troubleshooting and maintenance
- Ability to monitor the 24V power supply and provide useful diagnostic feedback
User questions & answers
Question: | I have a model p-r335a-en serial 030500. original control unit p/n 601588. is this compatible |
Answer: | I am not sure. When I purchased by board and it gave me this model board, which is completely different than original. I put it in and it worked perfectly. Very easy to replace. Don't break the piece on the board as instructing say. That is for commercial unit according to tech support. Good Luck |
Question: | Does this work as a replacement for the 601553 board |
Answer: | Working Great! |
Question: | will this replace the control board (part #010253F) for Model D406A |
Answer: | The proper replacement board for a Raypak model 406A is the 013464F. |
Question: | Does this board work for lp gas as well |
Answer: | It does and I saved the one I have because it wasn’t the panel. I found bad wires with insulation missing causing me to think it was the panel |
Product description
After installing the app, depends on the type of your heater, you should either connect the two wires of this device to the 2 wires terminal of the heater remote switch (in new type heaters) or replace the current mechanical thermostat in the circuit with this Wifi thermostat. Voice Control–Even better, Works perfectly with Amazon Alexa, Google Assistant, Google Nest, IFTTT, Amazon Echo, Echo Dot, Amazon Tap History record–You can check who (shared persons) and at what time turn on or off the fireplace. Specifications: Input voltage:5V DC Operating Temperature:0ºC-40ºC(32°F-104°F) Wireless Standard:802.11 b/g/n Security Mechanism:WPA-PSK/WPA2-PSK Temperature Range:–40℃~+125°C Package includes:wifi receiver with adapter (the remote will be your cellphone or computer that is not included)
User questions & answers
Question: | Does this come with a temperature sensor. What type and what fitting |
Answer: | Yes it does. Not sure but it fits the standard pool drain plug. |
Question: | Hi - Could this be used to control an electrically heated hot tub |
Answer: | No, but you can email me the voltage and amperage of your hot tub and I will custom make a unit for your application. |
Question: | Can you see current water temp from the app |
Answer: | Yes, you can monitor current temp from the app (from your phone). |
Question: | Will this work with a pentair 3 wire mastertemp |
Answer: | Yes, it works. |
- CSA approved portable tankless water heater for US &Canada markets. Lowest water pressure start up just need 3.0 PSI! Also works great with Camplux 12V 1.2 GPM water pump. You don't need buy extra accessories,you can get 2 pcs extension hose and fittings,complete pump package all in one.
- Wide comfortable water temperature range from 8℃-46℃ (46.4℉-114.8℉), 1.32 gallons per minute of hot water output, you can get instant on-demand hot water easily .
- Compact and lightweight size with folding handle keeps it out of the way, allowing for a convenient set-up outdoors,great for off-grid,road trips,camping trips.
- Flame failure device, anti-freezing protection,over heating protection,oxygen depletion safety shut-off protection always ensures you wonderful and safety outdoor showers.
- Designed with high efficiency combustion technology to decrease gas consumption and burning noise, structure with 11.5% energy saving technology,you can saving more energy and money
User questions & answers
Question: | Do you still need a source of electricity to run the pump |
Answer: | Would assume so. We don’t use the pump |
Question: | I’m installing this in a tight space. Can the top handle be removed? Can it be mounted to a wall via screws |
Answer: | Can't comment on the handle but the unit vents through the top and pulls air in through the sides. If the circulation isn't good the unit shuts down. You mention a "tight space" so I figured I pass this on. |
Question: | Does the unit that comes with the pump include the fittings in the picture for the 3/8" and 12V cord for pump |
Answer: | Hi,the whole product included everything in the picture, including the fittings in the picture for the 3/8" and 12V cord for pump.You don't need buy extra accessories,you can get 2 pcs extension hose and fittings,complete pump package all in one. |
Question: | What is the Amp specification on the 12 v pump |
Answer: | 3.5 A |
Product features
Features-
- The Camplux AY132S is great for camping, to the beach or family vacations mountain cabins horse stables etc.
- With Oxygen Depletion Sensor Protection, it can be also installed indoors where is well ventilated.
- Turn the ignition on with 2 "D" cell batteries whenever electricity is not needed!
- The ideal low water pressure operating range for the Camplux AY132S water heater is 3.0~110.0 PSI, work easily with great performance.
- The system also works great on modified water systems with a 12 volt water pump.
- The operating propane gas pressure is 0.4PSI with maximum power output 28,000btu/hour.
- The gas water heater can't be used for drinking water.
- The camplux tankless propane water heater line was not recommend for elevation above 2000 ft.
Bullet Points of Camplux 1.32 GPM Tankless Gas Water Heater
- Lowest water pressure start up on the market! Just need 3.0 PSI of water pressure. Works great with Camplux 12V water pump.
- The maximum temperature raise is 114.8℉(46℃) and the minimum temperature raise is 46.4℉(8℃)for 1.32GPM.
- It's compact size with portable handle allowing for a convenient set-up outdoors.
- Over heat protection,flame failure device, anti-freezing protection and oxygen depletion safety shut off protection.
- 1.32 gallons per minute of hot water output.
Enjoying Your Camping Trip with Camplux 1.32 GPM Tankless Gas Water Heater
The Camplux portable tankless gas water heater is perfect for campsites, cabins or simply around the house. Wash your car, wash your boat, take a hot shower, wash the dogs or the horse. The ignition is with 2 D cell batteries so it makes it great for off grid or other areas where electricity is not readily available. The ideal operating range for the 1.32 GPM Camplux portable tankless water heater is 3.0~110.0 PSI .The system also works great on modified water systems such as a 12 volt pump (Camplux model number -JK-2202/JK-3206 ).Available in liquid propane only.
Outdoor Shower
Enjoying outdoor shower with endless hot water during camping trip.
Bathing Horses
Offering your horse with a relaxing shower in the afternoon.
Bathing Dogs
Providing a comfortable sunbath for your pet dog.
Product description
📢 What are the benefits of using thermomate propane gas tankless water heater?
✅ 1. Starts up with only 2.5 PSI of water pressure, and up to 110 PSI! It's ideal for RV' s, campers, rural cabins, small apartments, flats, hunting cabins, as well as boats, sailboats, and mobile homes.
✅ 2. 34,000 BTU/Hr maximum power output, you can get instant endless hot water easily wherever you are. Our customers also use them for washing stalls, horse trailers, de-icing cars in the winter, outdoor camping, motels, small roadside restaurants and other situations where endless and economical water heating is required and water pressure is available at 10PSI.
✅ 3. This amazing instant water heater is designed for one point of use at a time.It delivers over 1.32 gallons per minute of hot water with a 77°F rise in temperature. This means that if your tap water is at 59°F, it will instantly deliver 1.32 gallons per minute of hot water at 113°F.
✅ 4. With remarkable electric pulse ignition technology that requires NO STANDING PILOT. The outstanding thermomate gas water heater saves up to 25% in gas consumption when compared to older technology lighted pilot lighted units. Even if in case of a power outage or no power supply such as in RV'S, campsites, boats and sailboats, you can still enjoy your hot water at home, as it uses 2 "D" cell batteries to ignite the electronic spark module.
✅ 5. It's designed by modern fashionable line shape. Magnificent thin-shaped & portable appearance,you can take it anywhere to get instant hot water.
📖 Specifications
Max. Flow Rate: 1.32GPM
Related Gas Pressure: 0.4 PSI
Power Rating: 34,000 BTU/Hr
Activation Flow Rate: 0.44GPM
Water Pressure: 2.5 PSI ~ 110 PSI
Flue Type: LPG ( Liquid Propane Only )
Power Source: 2 "D" Cell Batteries ( Not Included )
Vent Pipe: No needed for outdoor use
- [2.5 PSI Water Pressure Startup] Equipped with a magnetic water flow sensor, allowing the unit to work at low water pressure, stable water flowing to meet a wide range of usage for those in water shortage areas, including rural areas, RV's and Boats.
- [Instant Hot Water On Demand] Rated at 1.32 GPM, this water heater provides endless hot water on demand and only as needed, no need to preheat making it more efficient and energy-saving, saving up to 50% on water heating costs.
- [Multi Safety Protection] Anti-freezing apparatus draining the stock water to avoid damage of freezing under cold areas to the machine itself or in case of a long time no use. Featuring overheating and flameout protection, the gas supply will shut off automatically under unexpectedly flame out or high water temperature over 185 °F.
- [Compact Exquisite Design] Compact and space-saving design with minimal noise output which is portable for outdoors. A great partner for camping and road trips bringing an amazing hot shower for you when you are camping, hiking, fishing, beaching, etc. Besides, you can also wash your pets with this tankless water heater, or provide hot water for the swimming pool.
- [Easy to Install] Equipped with 1/2" BSP water fittings and manual water temperature controls make it easy to install and use. Please verify it's the right size you need: net weight 10.4lb; size 13.4(L)x4.7(H)x11.6(W); maximum power output 34,000btu/hour (10kW). Work with a 0.4PSI gas regulator (not included).
User questions & answers
Question: | Can you mount this on the floor on its back |
Answer: | Thanks for your consultation, there is no vent for this unit, we suggest you to use it outside of the camper. Any problem please feel free to contact us. Thank you. |
Question: | Can this be installed inside the trailer close to a roof vent |
Answer: | The manufacturer's instructions say it is only to be used outside, and that it is not designed for a permanent installation. Having said that, mine is installed inside an RV under a window. We crack the window when we want hot water and I am fairly confident we are not putting ourselves in danger of carbon monoxide poisoning. We run it for short periods - a little hot water for washing dishes or short showers. If the intended uses involved running it for longer periods I would want to place a proper vent over it that went outside. In any case, be sure you are mounting it with suitable clearances from anything flammable above and to the sides. |
Question: | Is there a vent for this unit? I want to use it inside my camper |
Answer: | yes,, i believe it's a round disk type battery |
Question: | It say that its no need to vent it so can this be used indoors without any problems |
Answer: | It uses a CR2032. The case takes some work to get apart to replace the battery. You have to be careful not to break the tabs that hold top and bottom together. Once you have it open, the electronics will fall out if you're not careful. You can see instructions here: http://mopeka.com/homepage/instructions/ |
Product features
AZ132 Propane Tankless Water Heater
[ Low Water Pressure Startup ] Starts up with only 2.5 PSI of water pressure, holds up to 110 PSI, no need a pressurizer pump anymore. It works perfectly at low water pressure, stable water flowing under high pressure to meet the requirements of those in water shortage areas, especially those found in rural areas, RV's and Boats.
[ Tinning Copper Heat Exchanger ] Adopts a durable Tinning Copper Heat Exchanger, more high efficient energy saving, corrosion-resistant with a long lifespan.
Endless Hot Water On Demand
As a tankless solution with high-efficiency tankless gas water heaters that deliver a continuous supply of hot water, you save up to 50% on water heating costs. thermomate AZ132 uses only the energy necessary to heat water on demand. With thermomate you no longer pay to heat and maintain a tank of hot water.
Safety & Easy to Maintenance
The thermomate propane tankless water heater features a anti-freezing apparats, which can discharge the stock water to avoid damaging machine itself by freezing under cold areas or in case of long time no use. It does not require cumbersome and costly installation of flues and ductwork because it is outfitted with state of the art double ODS (Oxygen Depletion Safety shutoff device).
Get Hot Water Easily As Needed
Starts up with only 2.5 PSI of water pressure, and up to 110 PSI! It's ideal for RV' s, campers, rural cabins, small apartments, flats, hunting cabins, as well as boats, sailboats, and mobile homes. Make you and your family enjoy the comfort and convenience of continuous hot water whenever and wherever you want it.
Cost Effective & More Hygienic
The thermomate propane gas water heater adopts a durable Tinning Copper Heat Exchanger & stainless steel main burner, decreasing gas consumption and burning noise, more high efficient energy saving, more hygienic and healthier, corrosion-resistant with long lifespan.
Latest Reviews
View all
Kids Phones
- Updated: 14.01.2023
- Read reviews

Image Bluetooth Audio Receivers
- Updated: 03.04.2023
- Read reviews

Industrial Drill Bits
- Updated: 14.04.2023
- Read reviews

Promark Air Fresheners
- Updated: 21.05.2023
- Read reviews

Pellet Grills On The Market
- Updated: 13.02.2023
- Read reviews