8 best anonymous water heaters

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75" H x 13.75" L x 13.5" D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	Yes, that is correct! Look for 1/2 to 3/4" hoses here on Amazon, or whatever you connection size is. They are very cheap and convenient here.
Question:	would this be able to supply a shower
Answer:	Installed at the outlet of the water heater, mainly to prevent electric shock, which is the second layer of protection
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	Should it be a white line? It means it has been powered on and can work after waiting for your settings
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	Dear Customer,  Thanks for your inquiry,BISELONG this water heater is not equipped with a remote control, you only need to adjust the temperature you want, generally do not need to adjust again.If you get any other question, please feel free contact us at [email protected] any time, we will do best to serve and help. Wish you pleasant shopping. Fly form BISELONG

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

Mueller Electric Kettle

• PUREST TASTING WATER - SUPERIOR QUALITY – Made with the finest quality Borosilicate Glass, which lasts a lifetime, 304 stainless steel and heat resistant copolyester for the safest, freshest water. A premium long lasting lid that stays shut when it’s supposed to for years to come, unlike the majority of the others on the market.
• MAXIMUM SAFETY - High quality thermostat controller, auto shut-off within 30s after the water is fully boiling. Boil-dry safety feature where it turns off if it detects there is no water inside. Built with a Heat-Resistant Anti-Slip Grip Handle, no worries of it slipping out of your hands or getting burned while holding it. Will not contaminate liquids.
• FASTEST BOIL - Equipped with bright LED’s which indicate the kettle is heating. The controller with Mueller SpeedBoil circuitry will boil the water lightning fast and be ready to use for tea, oatmeal, coffee, pasta and much more.
• VERSATILITY – Completely Cordless when off the base, the Mueller Ultra Kettle teakettle allows you easy and unobstructed pouring. 360° Clear Rotational Glass Body is perfect for precise measuring of water.
• EUROPEAN ENGINEERED – AMERICAN QUALITY ASSURANCE - Your satisfaction is assured so you can buy with confidence and boil happily ever after.

User questions & answers

Question:	Is the lid a large enough opening so one can reach in and clean the inside of the pot? And is the handle small enough for arthritic hands to use
Answer:	A regular keyboard fits on the tray with enough room for a regular-sized mousepad to the right (or left) of it. There's not much room to spare after that, but the set up is sufficient for my needs.
Question:	If it is plugged into a timed outlet that powers on in the morning, and you have it turned on, will it power on and boil the water for you
Answer:	Hello, Thank you for your interest! As long as the monitors are both placed and have enough space the arrangement will not matter. Thank you, VIVO Customer Support
Question:	Are there any plastic parts inside the kettle (that has contact with the water
Answer:	Hopefully, this might help you. You are correct, cross bar is part of the frame that the top is attached to. I have no idea what the c-clamp you are referring to looks like. What I can tell you is that the cross bar is located 2.5" from the edge of the top. I presume the manufacturer placed the cross bar away from the edge so clamps could be mounted but not sure if the clamp you are referring to would fit on the 2.5"? As a side note, I really like my desk. Has tons of room on the top and is very sturdy! Good luck!
Question:	Where is this made
Answer:	We're sorry, but the desktop isn't quite wide enough to fit two 27" monitors. You would also need a mount such as STAND-V002F: https://www.amazon.com/VIVO-Standing-Bolt-through-Adjustable-STAND-V002F/dp/B00C5H5DN0The desk is very sturdy, and will feel solid while using it.Thank you!

Product features

IT PURIFIES THE WATER

At a temperature of 160F or more, water kills almost all bacteria and pathogens living within it. Boiling water can make it safer to drink, especially important if you’re not using a water filter pitcher. We recommend BWT products because of their superior technology and quality.

COFFEE AND TEA TASTE BETTER

Water does not lose its vibrancy since the longer it boils, the more it loses its flavor. You know when the water is boiled, since it will automatically shut of, and you can use it immediately.

SAVES TIME AND ELECTRICITY

This electric kettle is more energy efficient than a microwave or electric stove-top. It saves your time, since you need very short time to boil your water, saving your money.

BETTER WORLD

Better World is disrupting e-commerce by matching brands with non-profits they care about and developing the platform for them to donate and make a difference.

MUELLER

By donating a percentage of your purchase we strive to support a charity that helps provide those who are in crisis situations get back on their feet.

YOUTH OPPORTUNITY CENTER

The Youth Opportunity Center receives donations from Mueller to provide a safe place for thousands of troubled youth and families- right here in the US.

Product description

120V - requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2" of foam insulation. Glass lined tank for longer life. 6 year on heater and 1 year on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90. 1. See Info Page for technical and installation specifications.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
• INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
• RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
• IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	What is the recovery time if the 7 gallons of hot water is used
Answer:	I have the 4 gallon tank and it is not too bad for the reheat
Question:	Can I reduce the pipe's size from 3/4 in to 1/2 in without any negative effect on the unit
Answer:	No harm to unit.....Max water flow will be reduced a little.
Question:	Can i use this to replace a small rv hot water heater
Answer:	Yes, but realize that it's electric and draws quite a few amps, most rv water heaters are propane.
Question:	The Manual request for the ES8 a 20 Amp breaker and 12GA wire. The wattage however is 1440 with 12 Amps. Why then 20 Amp breaker and not
Answer:	I would use a 20 amp circuit with 12 ga wire but there are no inrush concerns with a resistive load. A heating element does not have a higher initial current draw like a motor. It draws 1440 watts or 12 amps at 120v. Since 14 ga wire must be fused for 15 amps, this device by itself is already at 80% of the circuit’s capacity.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°

• External digital thermostatic control with LED display (+/1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper immersion two heating elements, field Serviceable. Flow Rate- up to 4.4 GPM
• Simple installation – bottom 3/4 inch NPT water connections
• Threaded for easy replacement, simple installation, digital temperature display

User questions & answers

Question:	Can this be used in a recirculating system
Answer:	No where on the box does it say contains copper. Box reads.... 100% nonstick surface - hand washable and dishwasher safe- PFOAF Free, PTFE- fiberglass coating, safe up to 500 degrees, FDA approved. We are happy with our purchase.
Question:	How many amps
Answer:	Of course it can.
Question:	how many breakers and what amp
Answer:	No
Question:	will this supply two showers, washer and dishwasher for two people? (1000 sf house
Answer:	Made in China

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

• External adjustable digital thermostatic control with LED display (+/1 degree accuracy
• Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
• Simple installation – 1/2 NPT adapters included; side 1/2 inch Compression water connections
• 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
• Threaded for easy replacement, simple installation, digital temperature display 54 A. 13kW Model Flow Rate: up to 3.17 GPM
• 54 A

User questions & answers

Question:	We have a 500sq' apt. 1 kitchen sink, 1 lav sink and tub/shower. This tankless heats water to both sinks but nothing to the tub/sh. Help
Answer:	Sinks have aerators to slow down the water where a tub doesn't. It sounds like one possibility is that your exceeding the GPM for this heater. Next possibility, double check an measure your actually getting at least 240v at the heater, I had an issue where my unit was only getting 235v an it was causing a similar issue where only one of the two heating elements was activating. I had it set to 125F but it was coming out 100F. It was warm and without a meter I would of thought it was working correctly until I tried filling a tub. It couldn't even get the water warm. I pulled my wires out an restripped an cut an screwed them in an it fixed my problem, now its measuring around 245v. Make sure there is no copper showing after screwing down your input wires. Now filling the tub I noticed after about 10-15 seconds the water gets too hot to touch. I set it to 135F.
Question:	Do these tankless water heaters require an overflow line to the outside of the home or a pan like is required on normal water heaters
Answer:	No tank, so, no overflow line required. It mounts on the wall. A pan is needed if required by building code in your city.
Question:	what are the wiring and power requirements
Answer:	good morning,60 amp breaker and , number 6 cable !thank you have a great day!
Question:	How many amps are needed for rheem rtex - 13 240v heating tankless electric water heater
Answer:	Hello-The RTEX-13 requires 1x 60A@240V breaker / 6 AWG recommended wire size.Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=Specification-Sheet&id=fc3235b7-7cd0-42cd-93bc-7169ea92be31 Rheem 800-432-8373I hope this helped :)Ben

Product features

About Us

Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925. While the company has produced a number of products in its nearly 100 years of operation, Rheem is currently the manufacturer that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is one of the largest manufacturer of water heating products in North America.

Product description

 Color:BIS03-White (no remote control)



FEATURES



Mini-Tank Water Heater comes with 1.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.



ENERGY SAVING



This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 95% energy saving with help of its smart self adjustment technology.



HEALTHY WATER QUALITY



MULTIPLE SAFETY PROTECTIONS



Over temperature protection



Dry heating protection



Leakage protection



Water and electricity line separated



EASY INSTALLATION



Real compact design, water heater cooridates with scenes decor, under sink water heater, Can be shelf, wall or floor mounted. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.



SPECIFICATIONS



Power: 1.5kW



Voltage: 120V~50Hz



Min. water flow to activate the unit: 0.475GMP



Maximum temperature 167°F



Max. Amperage: 15A



Recommended wire size: 10AWG



Required circuit breaker : 1x1-Pole 20 AMP



KINDLY NOTE



1.The equipment is mainly used for sinks.



2.Mini-tank water heater should be installed professionally.



3.Please read instruction manual carefully prior to installation and use!

• The label on the right of the product is to allow customers to use the product more energy-savingly. We will improve the language expression in the future. We are very sorry.
• 【NOTE】Fill the water first, then power on (otherwise it will damage the water heater).
• 【SAFE DURABLE & LONGEVITY】304 Made of stainless steel and never rust，Anti-leakage plug，Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant，This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
• 【SMART INVERTER FOR ENERGY SAVING】Digital Display，Automatic heat preservation and storage of hot water, 3.0 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%，Maximum temperature167℉，The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
• 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design，Easy to control warmth.Vent valve, Tee pipeline， pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
• 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time，8-15 minutes to heat to your desired temperature).
• 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 18.0''L x12.6''W x10.2''H; 8.86lbs; 1/2″NPT NPT. 1.5 kW, 110-120 volts. One-year warranty and 24H customer service support, feel free to contact us.

User questions & answers

Question:	Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink
Answer:	Yes you can connect this unit to the hot water supply line from your existing hot water heater and have hot water delivered to your kitchen sink. This unit will reheat the hot/warm water to the desired temperature. This should ensure you have continued hot water.
Question:	what is the lowest temperature this can be set at
Answer:	86℉
Question:	Brass tee provided does not seal on the hot water outlet, any tips
Answer:	The brass 3 way T is not meant to connect to outlet nipple. It needs the 1/2 in compression connector provided with it.
Question:	Can this be mounted laying down or does it have to be in a vertical position
Answer:	It is vertical

Product features

AGU 1.5Kw Mini-Tanks Water Heater Electric

Features

Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.

Endless Hot Water - Digital Display，Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.

Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted，easy to install.

Hot water on call

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the AGUST: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the AGUST can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

INSTANTLY HOT WATER

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.

ENERGY EFFICIENT

It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.

KNOB ADJUSTMENT

Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet，Optimal energy efficiency is promised.

GREAT FOR SMALL SPACES

Water heaters are compact，It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

Product description

It’s a wonderful thing to have a hot shower while ending the whole day work, but things get worse when there is something wrong with the water heater...



And here our mini portable heater can make you enjoy the hot shower anytime. You just need to plug into a 120V socket then you can boil the water in minutes.



Why choose our heater?

Mini portable size which takes up little place, easy to store and carry.

Double heating tubes to ensure an efficiency heating experience and greatly saving your time.

The high quality stainless steel guard to keep you away from contacting the water directly.

No drivers are required, just put the heater into the water then link to the power source.



Specification:

Material: stainless steel + ABS



Input Voltage: 120V

Size: 5”x5”



Package Contents:

1 x Electric Heater

1 xDigital thermometer with sticker

1 xLCD digital thermometer (including battery)

1 xClean the steel wire ball

• ♥♥【HEATING WATER IN MINUTES】 - Submersible electric heater makes water heating more efficiency and boil 5 gallon of the water in minutes, all you need to do is just put the heater in to the water then connect the 120V power supply, easy to use. Gifts: digital thermometer with sticker and LCD digital thermometer (including battery)
• ♥♥【HIGH QUALITY & SAFETY】 - Features of high quality copper wire for carrying more electricity, with ABS outer and anti-rust stainless steel guard to effectively prevent the heating element is in direct contact with the human body, safer to use and minimize accidents.We select the high performance heating element which has been strictly tested and with over 10,000 hours service time, sturdy structure and fine workmanship to ensure the superior quality, durable and reusable.
• ♥♥【MEETING YOUR VARIOUS NEEDS】 - Having a super comfortable bathing in the cold days, or use our heater to boil the water and have a nice foot soaking to keep your feel stay warm for the whole nights. Perfect for concrete work, farms, car snow-cleaning, wallpapering, etc..
• ♥♥【WARNING!】 - The heater needs to be completely immersed in water in working condition. It takes about 2 hours to heat 25 gallons of water from 0 ° f to 104 ° F. please do not use it for more than 3 hours continuously! If the capacity of your bathtub or small swimming pool is large and more than 2 water heaters are needed for heating at the same time, please do not plug the two heaters into the same outlet to avoid fire hazards. Please take out the heater before touching the water!
• ♥♥【BUY WITH CONFIDENCE】 - Quick response and friendly customer service, your satisfaction is a top priority for us, feel free to contact us if there is any issue with our immersion water heater and we’ll solve your problems within 24h.

User questions & answers

Question:	Does it heat to 100 Degrees C to create steam
Answer:	It can be heated to 100 ℃.
Question:	How to use the enclosed Thermometer and the sticker with temperatures
Answer:	When the metal probe of the thermometer is put into the water, you can know the water temperature. As for the digital sticker thermometer, you can stick it on the wall or fish tank, and its color will change according to the temperature. Thank you for your consultation and have a good time shopping.
Question:	How about the quality of the product? How fast and how long does it take to boil water
Answer:	This heater will not boil water. From what I have been reading.
Question:	Can you use this equipment to heat bathtub waht while I still reading in my tub? I hope the water is forever hot without the electric shock
Answer:	Yes, I bought it for that purpose. I have a large zacuzzi tub that could not fill up with hot water. I've used it twice. The water will get hot and stay hot with item in tub. I thought I was going to have to get another expensive heater just to take a bath. I feel I hit the lottery. It gets hot and stays hot so I can take longer Bath. Just make sure to read instructions. Love it. Well worth the money

Product features

Easy to Use

No any driver is required, just plug our heater into a 120V power socket, then the heater can automatically start heating, easy to use without complex steps.

Security Protector Case

The anti-rust stainless steel guard aims to keep you away from directly contact the heating elements, which adds the max protection to prevent accident injures.

Thicker Copper Cord

Adopt the high quality copper power cord in thicken design to carry more electricity without causing overheating, smoke or fire, adds more security while using.

Double Heating Tubes

Unlike other heaters with single heating tube, ours is equipped with 2 heating tubes to make the heating more efficiency, it only takes few minutes boil 5 gallon of the water.

Airtight Sealing

No more worrying there the electricity will meet the water. The joint is with excellent airtight sealing to keep the copper cord contact the water directly.

Rapid Heating

1500W high power water heater aims to reduce the heating time to save your time greatly, 3X faster heating experience than other heaters, practical and efficiency.

Widely Application

Whether you’re going to have a comfortable hot shower or enjoy a water-game party with your friends, our heater can do the job and bring you enjoyable experience.

Warm Tips

Easy to use and just put the heater into the water before you link it to the 120V power socket, don’t contact the water directly while heating the water.

Add More Convenience

The bottom is with an insulator while the smooth stainless steel guard aims to avoid scalding injures, freely to use.

When something goes wrong with your domestic water heater...

Having a super comfortable bathing in the cold days, or use our heater to boil the water and have a nice foot soaking to keep your feel stay warm for the whole nights. Perfect for concrete work, farms, car snow-cleaning, wallpapering, etc..