12 best rheem natural gas water heaters

Product description

Next Generation Burner Technology Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate UMC-117 remote control and 10 ft. of thermostat wire is included EZ-Lint cable available for high demand applications to connect two thankless units to operate as one Manifold up to 6 units with an optional MIC-6 manifold control board Exclusive! All Rheum models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly High-altitude capability - up to 9,840 ft. elevation above sea level (no chip required) Exclusive! Guardian OFWTM overheat film wrap All Rheum thankless models are third-party efficiency certified by GAMA Continuous hot water, energy saving and compact, space saving design Intelligent electronic controls designed to increase energy efficiency and safety Self Diagnostic System Digital display shows temperature setting and maintenance codes.

From the Manufacturer

Next Generation Burner Technology Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate UMC-117 remote control and 10 ft. of thermostat wire is included EZ-LinkTM cable available for high demand applications to connect two tankless units to operate as one Manifold up to 6 units with an optional MIC-6 manifold control board Exclusive! All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly High-altitude capability - up to 9,840 ft. elevation above sea level (no chip required) Exclusive! Guardian OFWTM overheat film wrap All Rheem tankless models are third-party efficiency certified by GAMA Continuous hot water, energy saving and compact, space saving design Intelligent electronic controls designed to increase energy efficiency and safety Self Diagnostic System Digital display shows temperature setting and maintenance codes

• Built-in electric blower Supplied with a 120 volt power cord
• Environmentally friendly Low Knox burner meets SCAQMD rule 1146 requirements
• Freeze protection to -30 Degree F

User questions & answers

Question:	Gallons per minute this unit produces
Answer:	I believe mine is 9 gallons per minute. It serves a full bath and a 3/4 bath and has never run out of water.
Question:	How hot can the water get from this unit. I want to run a washer that needs 160 degree water. Will this get this hot
Answer:	Rheem Unit Rec temperature is 120 degrees & maxes out at 140 degrees. So this unit will not meet your requirements.
Question:	Is this unit need electricity
Answer:	Yes. The ignition and internal controller require electricity. The heat is provided by the gas, however.
Question:	Does this model have a battery back-up (electronic ignition) system for when the power goes out
Answer:	Buy a UPS backup and plug this unit into it instead. You can read how much this unit draws when running and figure out much run time you would get from the UPS back up you purchased. I'd imagine any UPS (Uninterrupted Power Supply) backup purchased over a $100 should easily get you an hour or two of continuous use if it's just the blower that's requiring power. A UPS will recharge itself when power is back on so it's really a place and forget solution. You should change the battery in the UPS once a year but check individual UPS backup unit recommendations. This one seems geared for Tankless Water Heaters and other gas appliances and says it should last for 7 days of normal operation -> https://www.amazon.com/HUGO-Battery-Tankless-Heaters-Appliances/dp/B00VQHUKTM/ref=sr_1_2_sspa?crid=1FVBRMYF9L2L7&keywords=ups+battery+backup+for+tankless+water+heater&qid=1575626757&sprefix=UPS+%2Caps%2C210&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzNFRLTDZDRzZOWjNOJmVuY3J5cHRlZElkPUEwOTIzNzEzM0dIN0VFQ1o3SDdRMyZlbmNyeXB0ZWRBZElkPUEwNTQ2NzAxSFM2Mk8zVEwzWFk0JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Product description

Rheem RTG-84DVLN Direct Vent Indoor Natural Gas Tankless Water Heater Residential Tankless Water Heaters - Rheem tankless gas water heaters offer you the perfect solution to heat your water at home. Imagine never running out of hot water again. Rheem provides to you innovative, new tankless products that provide a continuous supply of hot water from energy efficient and space saving design units. Specifications - 8.4 gal./min. at 35A-Degree F rise max. - 6.6 gal./min. at 45A-Degree F rise : - New. 3"/5" Concentric Vent System with Integrated Condensate Collector - Connects to Metal Fab Inc.

From the Manufacturer

Rheem RTG-84DVLN Direct Vent Indoor Natural Gas Tankless Water Heater Residential Tankless Water Heaters - Rheem tankless gas water heaters offer you the perfect solution to heat your water at home. Imagine never running out of hot water again. Rheem provides to you innovative, new tankless products that provide a continuous supply of hot water from energy efficient and space saving design units. Specifications - 8.4 gal./min. at 35A-Degree F rise max. - 6.6 gal./min. at 45A-Degree F rise : - New. 3"/5" Concentric Vent System with Integrated Condensate Collector - Connects to Metal Fab Inc.

• Natural Gas Tankless Water Heater
• Direct Vent Indoor
• 8.4 gal/min. at 35-Degree Rise
• UMC-117 remote control and 10-Feet of thermostat wire is included
• Low Nox Version

User questions & answers

Question:	I have this same model installed that broke, would I be able to unhook all the pipes, remove and just hook up a new one using existing pipes
Answer:	Yes.
Question:	How many simultaneous showers will this (the so-called 8.4 GPM unit) handle (in the winter, in a northern state
Answer:	As far 2 showers at the same time you will be able to tell . The water will feel cooler but not cold. In the winter time I turn mine up to 140. The thermostat only goes up to 130 , but in the book it shows you how to turn it up.
Question:	What size gas line do I need and is everything I need to install the heater come with it
Answer:	Minimum size gas line is 3/4". The one I bought came with the shut off valves for the gas and water, but some don't. None of them come with the vent cap and special double wall 5" exhaust duck. It isn't required but you should consider a good drip pan since it does not come with one. It needs electricity. It has a 110V cord/plug, but you have to have an outlet to plug it into. It comes with the remote mounted controller, but it only has about 10' of cord. If you are mounting this in an attic and mounting the control panel down on the main floor you will most likely have to buy some more thermostat cord. It is readily available at any home improvement center and is cheap.
Question:	What is the BTU
Answer:	11,000 min. 180,000 max BTU'sIn you need more technical info or want to see other sizes. Go to Rheems website. http://www.rheem.com

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Rheem RTG-70DVLN-1 is a mid-efficiency indoor natural gas tankless water heater designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of .26GPM and minimum activation flow rate of .40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and EcoNet enabled mobile app feature (additional kit available), buying the Rheem RTG tankless water heater makes perfect sense. Included are a digital remote control and 10ft. of thermostat wire. Best if used with up to 3 bathrooms; .81-.82UEF (.82EF Canada), 160,000BTU efficiency. Professional installation is required otherwise warranty void. Warranty: 12yr heat exchanger, 5 yr parts and 1 yr labor.

• Exclusive Water Savings technology conserving up to 1, 100 gallons per year
• 160, 000 BTU (gas consumed per hour)
• Exclusive Hot Start Programming minimizes cold water burst by staying in ready-fire state
• Recirculation pump ready kit ready
• For use indoor only

User questions & answers

Question:	is this propane
Answer:	The N in the model notates this unit using natural gas. The propane version is as follows RTG-70DVLP-1.
Question:	will a 4 inch vent pipe work...will a 1/2" gas feed pipe work
Answer:	A 3"/5" concentric vent is needed. 1/2" will suffice if close to supply of has.

Product description

Rheem Prestige® RTGH-95DVLN-2 is a high efficiency condensing indoor natural gas tankless water heater designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of .26GPM and minimum activation flow rate of .40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and EcoNet enabled mobile app feature (additional kit available), buying the Rheem Prestige tankless water heater makes perfect sense. New 2” venting with band connections allow up to 150’ with a 3” PVC or 60’ with a 2” PVC pipe. Included are also a built-in condensate neutralizer, digital remote control and 10ft. of thermostat wire. Can be used with up to 5 bathrooms depending on inlet temperature; .93UEF (.96EF Canada), 199,000BTU efficiency. Professional installation is required otherwise warranty void. Warranty: 12yr heat exchanger, 5 yr parts and 1 yr labor.

• Exclusive Water Savings technology conserving up to 1, 100 gallons per year
• 199, 900 BTU (gas consumed per hour)
• Exclusive Hot Start Programming minimizes cold water burst by staying in ready-fire state
• Recirculation pump ready kit ready
• For use indoor only

User questions & answers

Question:	Whats the difference between this and the rtgh-95dveln
Answer:	I think the devln has wifi capabilities.
Question:	Can I run 2 units in tandem and will the controller talk to each other
Answer:	Hello- Yes. You can connect 2 alike units using an RTG20040 EZ Link cable. Thanks :) Ben
Question:	Is the thermostat included
Answer:	Yes, a thermostat is included.
Question:	Whats the between this and the difference rtgh-95dvln
Answer:	Hello- The main difference was an upgraded fan, which in turn, allowed them to downsize the vent ports from 3" down to 2". So both of the connections on top for intake air/exhaust are now ran in 2" For more info, please call Rheem at 800-432-8373 Thanks Ben

Product description

Rheem Gas Control (Thermostat), Natural Gas. NOTE: All gas valves should be installed by a licensed professional.

From the Manufacturer

Rheem Gas Control (Thermostat), Natural Gas. NOTE: All gas valves should be installed by a licensed professional.

• Guardian Gas Valve
• Natural Gas
• Replacement Parts

User questions & answers

Question:	Do you carry part sp12491d or a compatible replacement
Answer:	I apologize, it appears that SP12491D is no longer available, Rheem has stopped producing it. We unfortunately do not carry it. Our advice would be to reach out to a licensed technician who may be able to help you find a universal replacement.
Question:	I have a gas control valve ap14270f-1. will this one work
Answer:	No, but this one will! https://www.amazon.com/dp/B07G2FKBGV?ref=myi_title_dp Thanks!
Question:	Will this replace a AP14270M
Answer:	I believe so, but please verify with your manufacturer.
Question:	Is this part compatible with ao smith fsg
Answer:	No is not

Product description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4'' NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty. It can provide between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

• Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches ;Pipes fittings :3/4 inch NPT
• Digital temperature control in 1-degree increments allows control of hot water; Activation Flow: 0.3 GPM
• Copper and stainless components designed for efficiency, durability and easy replacement.
• Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
• Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, 40 required breakers, 112.5 maximum power (AMP), 8 required wire.Amperage Draw:113 A
• Required Breaker Quantity: Three 40 Amp Double Pole
• Recommended Electrical Panel: 200 Amps

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	In order to have a 208 volt power you would need to be pulling off of 2 legs of a 3 phase service. Are you sure you have 3 phase?
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	Approx 7x11. The cover is approx 8x12
Question:	What is the power consumption of this tank-less heater
Answer:	This is a 240V/208V heater. At 240V this heater draws 6.25 amps.
Question:	remote
Answer:	Are you asking if it can be wired 208 volt? The answer is yes. I don't have any experience with model you are referring to otherwise.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Rheem SP13884H Water Heater Inner Door Gasket/Pilot Assembly Kit Natural Gas

• Inner Door Gasket/Pilot Assembly Kit (Natural Gas)

Product description

Rheem/PROTECH Water Heater Pilot Assembly for select natural gas water heaters. Key Words: Rheem PROTECH Water Heater Service Part Pilot Assembly

From the Manufacturer

Rheem’s PROTECH brand Pilot Assembly kit includes: Pilot Assembly, Burner Door Gasket, Screws, Tinnerman Clips and Instructions

• PROTECH is Rheem's OEM (original equipment manufacturer) brand for Rheem Factory Authorized Parts.
• Rheem/PROTECH Water Heater Pilot Assembly for select natural gas water heaters
• Kit Includes: Pilot Assembly, Burner Door Gasket, Screws, Tinnerman Clips and Instructions
• Ensures safe and reliable operation
• Torx screw driver not included

User questions & answers

Question:	Will this part work on a Rheem 41V50 water heater
Answer:	only allow a professional to install the pilot is very specific to model
Question:	Is this work with model prog38-38u rh62? thanks
Answer:	I believe so, but it is best to check with the manufacturer.
Question:	The question was never definitively answered. I also have the LP model of this water heater. Will this pilot assembly work with LP gas
Answer:	No
Question:	Will this work for a rheem fury model 22v40f
Answer:	yes it does. its the replacement for rheem part for the 22v40f1

Product description

This is a Brand New OEM Water Heater Natural Gas Valve

• This is a Brand New OEM Water Heater Natural Gas Valve
• Top Quality OEM Replacement Part!

User questions & answers

Question:	does this replace wv8840c1404 rheem ser a121520032 mod xg40t06ec36u
Answer:	Yes, this will work for your model!
Question:	Is this a replacement for 37n73u-872 models
Answer:	I'm sorry; I'm not finding 37n73u-872 as a valid model number. We will need the following information to verify parts compatibility: the brand name of your equipment along with the complete model and serial numbers off the unit, not the part. (By saying 'Unit' we mean the complete furnace, air conditioner, or appliance.)

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Rheem AP14698B Water Heater Pilot Assembly Natural Gas

• Pilot Assembly (Natural Gas)

User questions & answers

Question:	Will this fit an AP16614A replacement
Answer:	It works great to close our vinyl pool. It's under water so it doesn't generate heat We closed our pool this week.
Question:	will it be compatible with water heater model xg50t12dm40u
Answer:	yes, it comes with a standard 3/4" garden hose male threaded fitting