10 best watts gas range

Product description

This 5/8 inch OD, 1/2 inch ID, 48 inch long, gas connector kit includes all components needed for a complete installation. This kit contains one stainless steel connector, three fittings, a 3/4 inch MIP and two 1/2 inch MIP adapters, pipe thread sealant, leak test solution and a detailed installation guide. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and furnaces.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

• Designed for: Ranges, Stoves, Furnaces or Boilers.
• Included Adapters - 90-3031-- 5/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-3041-- 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP)
• 106,000 BTU
• 100% Factory leak tested
• 304 Stainless Steel flexible tubing with plated steel end fittings

User questions & answers

Question:	Will this work on propane stove
Answer:	If the threads are tapered that is correct. If the fitting is straight than NOT true. If you use tape on gas you need the yellow gas tape. I like to dope straight fittings or what some call black pipe fittings even though it is not black pipe. When tapered no dope or no tape is needed
Question:	Can you use for dryer
Answer:	you will need at least 4ft. in length to give you enough space to move the stove out if needed. this comes with all the fittings needed to hook up to stove with different size hookups.
Question:	Reviews say actual lenght is shorter than 48 inches. Is this actually 48 inches
Answer:	yes it should.
Question:	Can this be used on a propane stove
Answer:	No sealant is included. Pipe thread fittings need compound compatible with gas, and compression fittings do not get compound.

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.

Product description

This 5/8 inch OD, 1/2 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 3/4 inch MIP adapters and is 48 inches in length. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces. It comes in a bag.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

• Designed and certified by CSA for indoor and outdoor use
• Durable and corrosion resistant
• 304 Stainless steel
• 100 Percent factory leak tested

User questions & answers

Question:	Can you remove the male adapters from the ends of this hose
Answer:	Yes, I used it on mine.

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.

Product description

Size:60 InchFrom the ManufacturerThis Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust. This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

• Stainless steel gas range connector
• 5/8-Inch OD x 60-Inch length gas connector
• Connector made with 3/4-Inch FIP x 3/4-Inch FIP brass fittings
• Made in the USA

User questions & answers

Question:	What is the warranty
Answer:	The sink is 33 inches wide, so probably not.
Question:	does this computer come with a dvd/cd drive
Answer:	18 gauge................ the product page is http://www.kraususa.com/ktm33-33-inch-topmount-50-50-double-bowl-18-gauge-stainless-steel-kitchen-sink.html
Question:	The tower has an hdmi or display port
Answer:	It's always risky to have the hole cut prior to the sink's arrival. With that being said and looking at the sink's dimensions, it should work with your hole size. But definitely give Kraus's technical department a call. They will have more dimensional information then we have access to. Toll Free: (800) 775-0703
Question:	Can I install Windows server on this machine
Answer:	Hi there, Thank you for your interest. We offer a one year warranty with all purchases. We do not currently have an option to purchase insurance. If you have any further questions please reach out to customer service at 703-688-3375. Best, Megan from Stand Steady Customer Service

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.

Product description

SAVE ENERGY, WATER, MONEY, TIME – Atmor offers the efficient and convenient water heating solution you have been looking for. Atmor 3kW/ 110V Point-of-Use Tankless Electric Instant Water Heater provides an unlimited flow of hot water without the wait or worry of ever running out. That’s right, instant hot water on demand! This unit is specifically designed for hand washing SINGLE SINKS in areas with at least 57°F ground water temps (See Sizing Guide). Please note that this unit will not operate properly in Northern regions with inlet water temps colder than 57 degrees. A flow rate of 0.5 gallon per minute (GPM) is required in order to achieve a 45° temperature rise. Perfect for residential and commercial use, this compact unit can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 30 Amp dedicated single-phase breaker. This is NOT a plug in unit. Required wire size: 10 AWG. Standard 1/2" NPT (straight thread) fittings. Maximum flow rate is 0.5 GPM. Maximum temperature rise possible for unit is 45°F. For safety reasons, the included Pressure Relief Device (PRD) included must be installed on your water heater per the instructions in the owner's manual. In order to achieve maximum performance, it is recommended to install the included 0.5 GPM sink aerator. Failure to comply with the installation and operating instructions in our Owners Manual or improper use will void the warranty. The water heater must be installed by a licensed electrician in compliance with all local and building regulations.

• Ideal for single sink application in areas with at least 57° ground water temperature
• Maximum flow rate 0.5 GPM (Gallons per Minute) = 45° F temperature rise. Slower flow rate = higher temperature rise.Max tested working pressure: 16 BAR (230 PSI)
• Requires a direct connection to a 30 Amp single-phase breaker. Required wire size: 10 AWG. Not a plug-in unit.
• Instant and endless hot water on demand without the wait or worry of ever running out
• Includes a 0.5 GPM Aerator for sink faucet and Pressure Relief Device (PRD)

User questions & answers

Question:	What is the gallon per minute gpm for the Atmor AT
Answer:	The flow rate of the AT900-03- 3Kw unit is 0.5 GPM.
Question:	will it work on 110/120 and does it have to be wired in or does it have a plug
Answer:	The AT900-03 - 3Kw unit is 120 volt. It requires a 30 amp single pole breaker with # 10 gauge wire. The unit is to be direct wired and not to be plugged in.
Question:	Can a person take a shower using this unit, our water comes out cold especially in winter 45 degrees some times lower
Answer:	It will make the water a lot warmer, provided you are able to provide a dedicated 10 gage electrical line with a 30 amp circuit breaker and a Ground Fault Circuit (GFI) outlet. You will also have to install a power cord to this unit, as it doesn't come with one.
Question:	What size is the water connector? 1/2", 5/8", pipe fitting? compression fitting
Answer:	it comes with a 1/2 " compression fittng. Remove it and use a 1/2 copper connector or better yet a 1/2" shark byte fitting. No sodering needed.

Product features

Choose your Atmor Unit

Atmor wants to make sure we deliver you an endless supply of hot water on demand! Selecting the Atmor unit for your application can be done in 3 easy steps; which can be found on this image as guide. For additional product specifying needs, contact Atmor support.

How Atmor Works

Cold water enters the boiler on one side and hot water exits on the other side. When a faucet is turned on, an automatic mechanism detects water flow and switches on the heating element. The device uses a method in which water flows through a small boiler which contains an electric heating element. The water is quickly heated as it passes through the pipes within the small boiler. A thermostat protects against overheating.

Atmor is a Fully Integrated Design-to-Production Company

The Atmor patented canister integrates a unique mechanism for detecting water pressure and/or flow. Unique design for channeling water effectively from heater inlet to outlet. The canister is composed of a plastic and glass fiber formula adopted by Atmor from the car industry. The canister is safe for use since plastic naturally protects against electric shock. The canister has better insulation for convection, and thus better energy efficiency.

Product description

Your most basic home needs, like gas heat, kitchen range, dryer, hot water and even standby generator power, rely on a tested, durable connection—and the safety of your home and family depend on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

• Designed for: Ranges, Stoves, Furnaces or Boilers
• Included Adapters - 90-3031- - 5/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-3041- - 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP)
• 106,000 BTU
• 100% Factory leak tested
• 304 Stainless Steel flexible tubing with plated steel end fittings
• Indoor or Outdoor Use
• CSA Approved
• BAA Compliant

User questions & answers

Question:	I read online it is not advised to use teflon tape on the connector nuts, is this true
Answer:	Yeap
Question:	What size and length do I need to hookup a new stove to the gas supply directly behind it
Answer:	Fittings on the hose I received were regular steel. not brass as pictured and specified, they will rust.I am still looking for the one with brass for outside use.
Question:	Will this work on a 3/4 inch gas line
Answer:	Hello, No this is not meant for gasoline. Thank you
Question:	I assume the pipe thread sealant that is included here is what is used for my dryer recommendation of pipe-joint compound for non-flared threads
Answer:	The ends for this are 1/2". Thank you!

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.

Product description

This kit contains 24 IN yellow coated corrosion resistant SS gas connector 1/2 IN MIP-tapped 3/8 IN FIPx3/4 IN MIP-tapped 1/2 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution. This CSA approved gas connector is often used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 5/8 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow in temperatures ranging from 350-425 degrees F.

• Designed for: Ranges, Stoves, Furnaces or Boilers.
• Included Adapters - 90-3031-- 5/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-3041-- 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP) -EFV-TS-- 5/8 In.OD Flare X 1/2 In. MIP
• 150,000 BTU
• 100% Factory leak tested
• 304 Stainless Steel flexible tubing with plated steel end fittings
• Indoor or Outdoor Use
• CSA Approved
• BAA Compliant

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.

Product description

This kit contains 48 IN yellow coated corrosion resistant SS gas connector 1/2 IN MIP-tapped 3/8 IN FIPx3/4 IN MIP-tapped 1/2 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution, This CSA approved gas connector is often used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 5/8 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow in temperatures ranging from 350-425 degrees F.

• Designed for: Ranges, Stoves, Furnaces or Boilers
• Included Adapters - 90-3031- - 5/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-3041- - 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP) -EFV-TS -- 5/8 In.OD Flare X 1/2 In. MIP
• 106,000 BTU
• 100% Factory leak tested
• 304 Stainless Steel flexible tubing with plated steel end fittings
• Indoor or Outdoor Use
• CSA Approved
• BAA Compliant

User questions & answers

Question:	My samsung has 56000 btu cook top, but states 170,000 total (with oven), which of these will fit my range? thx
Answer:	Dak, thanks for reaching out! the 48" that you chose would work for your range but you could also try this model as well B075BFHZRD.
Question:	Will it work on frigidaire 30'' gas range which requires a flexible metal appliance conduit (1/2” npt x 3/4” or 1/2” i.d
Answer:	Hello, Yes, this should work. Thank you
Question:	My range has a max output of 133000 btu (5x25k btu and 1x8k btu burners) - can i use this without the safety, or is there another which can handle it
Answer:	Check your instructions on both, I don't recommend it on a burner, should be hard piped
Question:	What is the fip diameter of the connectors without any adapters on the xl30c
Answer:	Adapter is included

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.

Product description

This 48 in. long Dormont Gas Dryer and Water Heater Flex-Line Is made of durable, corrosion-resistant stainless steel. It is configured with pipe threaded fittings for installation. Designed with safety in mind, this CSA-approved gas connector is commonly used for the installation of home appliances such as gas dryers and water heaters.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

• 48" gas connector
• 1/2" OD (Outer Diameter)
• 3/8" ID (Inner Diameter)
• Fitted with 1/2" MIP (Male Iron Pipe) x 1/2" FIP (Female Iron Pipe) tapped with 3/8" FIP
• ANSI z21.24/CSA 6.10

User questions & answers

Question:	can this be used for an exterior generator
Answer:	The included adaptor was the right size to go into a standard shut-off valve, which is where it's supposed to go.

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.

Product description

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

• Designed for: Space Heater, Gas Log, Wall Heaters
• Included Adapters - 90-1031-- 3/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-1032-- 3/8 In.OD Flare X 1/2 In. FIP
• 33,400 BTU
• 100% Factory leak tested
• 304 Stainless Steel flexible tubing with plated steel end fittings
• Indoor or Outdoor Use
• CSA Approved
• BAA Compliant

User questions & answers

Question:	Can this hose be use for a dryer? It says is for water or wall heater
Answer:	Overall I am happy with the sink. One small problem. There is a small dent in the side. We must have hit it with something. Still not bad enough for me to not recomend this sink.

Product features

Dormont: A Gas Safety Company

Your most basic home needs, such as gas heat, kitchen range, dryer, hot water, and standby generator power, rely on a tested, durable connection system—and the safety of your home and family depends on the quality of the connectors you choose. At Dormont, we make every connector as if we were going to install it in our own homes.

As a leading inventor and manufacturer of safe, high-quality stainless steel gas connectors, Dormont has earned the reputation as one of the foremost experts in safe gas connectivity for the home. We have been the industry-leading manufacturer of the broadest line of high-quality, safe, and long-lasting stainless steel gas connectors for decades, and will continue to be an innovative, reliable source for residential gas solutions for decades to come.

Dryer and Water Heaters

Tubing is durable, flexible, and corrosion-resistant.

Home Appliances

• Ranges
• Stoves
• Furnaces
• Boilers

Commercial Applications

• Commercial Hot Water Heaters
• Commercial Furnaces
• Commercial Boilers
• Rooftop Units
• Standby Generators

Gas Hearth

Approved for indoor and outdoor use with stationary gas appliances.