14 best pex tubing for radiant heat

• Genuine PEX GUY Brand Product - Made in the USA
• Omega Type - 1/2" PEX snaps on to the plates to hold it in place.
• Manufactured from stamped aluminum
• Dimensions: 24" Long x 4" Wide x .016" Thick
• Compatible with all types and brands of 1/2" PEX tubing (5/8" OD)

User questions & answers

Question:	Does it work with 5/8 pex
Answer:	Hi Andy, Thank you for the inquiry. However, these PEX GUY Aluminum Heat Transfer Plates are only suitable for 1/2" PEX due to the difference in the outside diameter of 1/2" and 5/8" PEX piping. Alvin PEX Superstore
Question:	When stapling thes to bottom of subfloor can u mount both side of plate or will it pop and make noise from heat rransfer
Answer:	Hi Kyle,It is recommend to mount both sides of the plate for stability reasons. There is usually some noises that will come from your system when the PEX piping expands and contracts. This is a normal occurrence in radiant heating systems. Alvin 1-877-235-6352The PEX Superstore
Question:	What is the channel height when the flats are flush with the mounting surface
Answer:	Hi Christopher,The channel height for these PEX GUY Omega Type Aluminum Heat Transfer Plates are about 5/8". This is due to the outside diameter of 1/2" PEX piping being 5/8". Please let us know if you have any more questions.Alvin 1-909-606-0988The PEX Superstore
Question:	sq ft how many 2' will i need
Answer:	Hi, Based on our standard estimated calculation, for a 1400 Sq Ft area, you will need roughly 910 plates for that area. This is a rough estimate based on 8" spacing and no interior walls or obstructions. Design of layout/floor plan may alter your total number of plates required. Alvin PEX Superstore

Product features

PEX GUY 2 ft Snap On Aluminum Heat Transfer Plates (100 pcs)

These PEX GUY Snap On (Omega) Aluminum Heat Transfer Plates come in boxes of 100 pcs and are used with 1/2″ PEX piping to help distribute the heat evenly throughout your radiant heat floor. The PEX piping lays into the grooves of these plates and help transfer heat creating a more even heating area under your floor.

Specifications

• Manufactured at ISO 9001
• Compliant with AB1953 (No Lead / Lead Free laws) in the USA

Made In The U.S.A.

All of the heat plates are proudly made in the U.S.A.

Manufactured with high quality aluminum

Dimensions

24 inches Long

4 inches Wide

.016 inches Thick

Residential & Commercial Applications

Perfect for under-floor heating systems in residential, commercial and industrial settings.

All PEX

Will fit and can be used on any type of PEX piping (SDR-9 sizing standard) for use in North America.

Viega, Wisbro, Uponor, Watts, ReHau, Efield, Everhot, Zurn, Nibco, Bow, etc

• Genuine PEX GUY Brand plates
• Omega Type - 1/2" PEX snaps on to the plates to hold it in place.
• Proudly Made in USA
• 48 inch long (4 ft) Aluminum Plates for 1/2" PEX piping
• Dimensions: 48" Long x 4" Wide x .016" Thick

User questions & answers

Question:	What is the difference between this plate and the HP-4 model
Answer:	Hi Robbie, These are our Omega style Heat Plates for PEX tubing. The HP-4 are our standard U-channel plates; while these plates are considered our C-channel plates. The channel where the PEX lays in are grooved a little further in so the PEX tubing snaps into the channel. Other than the way the channel is formed, the two are very similar. Alvin PEX Superstore
Question:	Will this cut into the tubing as it thermally expands and contracts? Any tricks to avoid/minimize the chances of that
Answer:	Doesn't seem too. Just don't get them to close to the bends at the ends. Use clamps on the pipe to hold the loops. This was the 3rd year in use, no problems.
Question:	Is the width 4.38 on each side or total width
Answer:	4.38 inches is the total width.
Question:	Are these available for 3/4” Peckinpah pipe
Answer:	Hi, Thank you for the inquiry. However, we do not carry these plates in any other size other than 1/2" for 1/2" PEX piping. Please feel free to let us know if you have any other questions. Thank you. Alvin 1-909-606-0988 PEX Superstore

Product features

PEX GUY 4 ft Snap On Aluminum Heat Transfer Plates (100 pcs)

These PEX GUY Snap On (Omega) Aluminum Heat Transfer Plates come in boxes of 100 pcs and are used with 1/2″ PEX piping to help distribute the heat evenly throughout your radiant heat floor. The PEX piping lays into the grooves of these plates and help transfer heat creating a more even heating area under your floor.

Specifications

• Manufactured at ISO 9001
• Compliant with AB1953 (No Lead / Lead Free laws) in the USA

Made In The U.S.A.

All of the heat plates are proudly made in the U.S.A.

Manufactured with high quality aluminum

Dimensions

48 inches Long

4 inches Wide

.016 inches Thic

Residential & Commercial Applications

Perfect for under-floor heating systems in residential, commercial and industrial settings.

All PEX

Will fit and can be used on any type of PEX piping (SDR-9 sizing standard) for use in North America.

Viega, Wisbro, Uponor, Watts, ReHau, Efield, Everhot, Zurn, Nibco, Bow, etc

• Reliable quality- Color: Red Nominal Diameter: 1/2"; Total Length: 1000ft. Outside Diameter: 0.625"; Inner Diameter: 0.475"; Keep quick & smooth hot/cold water flows. Made of PEX material,crack-resistant, leak-proof
• Diverse use scenario - Suit for home & commercial use, like: radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up
• Robust o2 resistant - Unique EVOH layer, stop O2 into the tube, protect metal components from corrosion. Heating system's service time can be greatly lengthened. Smooth inner pipe, anti- scaling quality, increase heat dissipation efficiency
• Effortless installation - Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings); Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings)
• Premium flexibility - Min.5" bending radius, easy to bend for different ground situation. Big pressure capacity: 80psi @ 200℉, 100psi @ 180℉, 160psi @ 73℉. Thus to ensure its good temperature resistant, crack- & leakage-proof.

User questions & answers

Question:	There is no wording on my 1/2" oxygen barrier "Happybuy" pipe. Why and is this an inspection issue
Answer:	sure
Question:	What makes this Pex pipe not suitable for potable water application or open direct systems where you don't drink from the hot water only bathe/wash
Answer:	As far as I know I have used PEX out to my dock for drinking water. No problems as yet.
Question:	Did anyone else have issues with not receiving all of their order? We ordered (3) 1000 foot rolls and we only received
Answer:	I ordered 3 and onnly got 2 at first but after contacting the shipping company they found the other one
Question:	Thinking of using in our 1600 sq ft shop.....how many rolls are suggested
Answer:	You are asking the wrong question. You need to know how much heat you will need on the coldest day, how well insulated is the slab, how warm are you going to keep the shop, how big a boiler are you going to need? then you can start figuring out the pex spacing which will tell you how many feet you need. Go to heatinghelp.com in the area called the 'wall', the site has many experts who will help if your questions are thought out, good luck,

Product features

1/2" 1000ft PEX Tube

Industrial-grade pex tubing, crack-resistant, leakage-proof and anti-aging after long year's use. Nominal Diameter: 1/2"; Tube Length: 1000ft, longer than normal products

EVOH Oxygen Barrier

resistant to high temperature or cold weather. No leakage worry, dual used as radiant heating tube or potable water pipe.

5" Bending Radius

Expands and shrinks with temperature changes and support freeze resistant, this tube is with min.5" bending radius(industry standard for 1/2" pipe) and excellent flexibility.

Different Tube Connections

Can be connected in many ways: Crimp connection system(crimp tool + rings + fittings).; Cinch (clamp) connection system; Press system(by Viega); Compression PEX Fittings.

Compatible Install Method

Suitable for many floors, like: (non-) structural concrete slabs; staple-up (between joists) radiant floor heat; "Sandwich" type radiant heating; Snow & ice melting systems etc.

Commercial & Home Use

Multi-use water pipe, applied for plumbing, radiant & hydronic systems, and potable water. Keep quick hot & cold water flows. Red color just for easier identification.

1000Ft PEX Tubing ：

This 1/2" 1000ft PEX pipe is commonly used for plumbing, radiant & hydronic systems. It is quick to install, flexible and used on hot/cold potable water lines. EVOH oxygen barrier layer, prevent O2 from penetrating into tubing system.

• 【Premium Quality】WiseWater Pex Radiant Manifolds are made of durable stainless steel material, which is corrosion-resistant and pressure-resistant and has higher thermal conductivity, faster heating and insertion into plastic pipes.
• 【All In One】Each radiant heat manifold includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks. 1/2 in Adapters Not Included.
• 【Easy For Installation】Heavy duty stainless steel mounting bracket is included makes it attachable to any wall easily. No PEX tools required，Just use regular pliers or adjustable wrench to connect PEX tubing to the manifold. Pressure tested and pre-assembled. Simply mount the manifold on brackets and connect valves and PEX tubing.
• 【Product Parameter】2 loops with 1 extra drain and cap, 1” FPT supply and return, up to 1.6 GPM high flow meter. Compatible with 1/2" tubing outlets, great for radiant floor heat systems.
• 【100% Satisfaction Service】We provide premium quality as well as 100% Satisfaction Service, please feel free to contact us if you have any question about out product.

User questions & answers

Question:	Are drain caps available for purchase anywhere
Answer:	Hi, Brenda You can find it by search " drain cap" on Amazon and I have found one drain cap but not sure if it meets your requirement or not, please search Asin B00IDCOF12 on Amazon to check if it is ok for you. Thanks!
Question:	The picture shows five outputs on hot and cold side. But description says only 2 loops .is the picture correct
Answer:	Yes, 2 ins, 2 outs and drain or hose adapter.
Question:	I am having problems getting water to flow through the flow valves, How much water pressure in the boiler do I need to have them open
Answer:	Boiler pressure is 12 psi When cold and monitored by the fill valve You control the flow with the white caps on the return manifold. Make sure they are open
Question:	Can this be used with potable water systems
Answer:	Yes, it can. Depend on what is the water flow rate of your potable water heater, result may be vary by both size and pipe fitting choices. It is recommended to contact local professional for proper install suggestion.

Product features

Details

Temperature Gauge, displaying both Fahrenheit (120F) and Celsius (80C) for your convenience

1 extra cap on both drain valves can be used to put an outlet on standby

Manual valves allow adjustment of flow rate

Shut-off valves on both supply and return outlets

Drain valve can be used as an extra plumbing outlet

Zone valve can be used to control different zones

Air vent valve for purging air during the water filling process.

Features

Its stainless steel material are higher thermal conductivity, faster heating and insertion into plastic pipes

Flow Valve (Meters)

It indicates the flow of heat that is distributed throughout the system.

Shut-Off Valve with Temperature Gauge

Shut-Off Valves include 1" NPT connections and temperature gauges to monitor supply and return temperatures.

Drain Valve with Automatic Air Vent

3/4" Drain Valve has adapters and cap for draining and filling of heating system conveniently. With the automatic air eliminators/ air vent, air can be purged from the radiant heat system.

1/2" and 3/4" Adapter all compatible

Adapters/Connecters Not Included.

Drop us a message if you need 1/2" or 3/4" Adapters.

• Genuine PEX GUY Brand plates
• Proudly Made in USA
• 48 inch long (4ft) Aluminum Plates for 1/2" PEX piping
• Dimensions: 48" Long x 4.5" Wide x .016" Thick
• 0.016 Thick High Quality Aluminum Heat Transfer Plates

User questions & answers

Question:	If I’m doing in floor radiant heat can these go on top of the pex or does it have to be under the pex
Answer:	Hi quijibo, Yes, these PEX GUY Aluminum Heat Transfer Plates can be installed over or under the PEX tubing for radiant heating applications. Please let us know if you have any more questions. Thank you. Alvin PEX Superstore
Question:	what is the width of each plate
Answer:	The plates I received from you are 4 3/8 inches wide.
Question:	is one purchase for 100 units (plates
Answer:	Yes. 1 box from this listing has 100pcs of plates inside.
Question:	What is the difference between this transfer plate and the Omega style
Answer:	I'm not sure about the omega plates but I used the regular aluminum plates in the basement on the underside of the first floor and I found them easy to put screws thru to hold them in place over the pex tubing.

Product features

Genuine PEX GUY 4 Ft Long Aluminum Heat Transfer Plates for 1/2" PEX tubing (100 pcs)

These PEX GUY Aluminum Heat Transfer Plates are for 1/2″ PEX piping to help distribute the heat evenly throughout your radiant heat flooring. The PEX piping lays into the grooves of these plates and helps distribute the heat more evenly under your floor.

• Manufactured from stamped aluminum.
• Allow 1-2 inch spacing between plates for expansion
• Compatible with all types and brands of 1/2" PEX tubing (5/8" OD) PEX-A, PEX-B, PEX-C
• Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills.

How to calculate # of plates:

• Calculations ( 8 inch spacing): Number of plates = sq area x 1.30 / length of plates
• Example: 1000 sq ft area multiply by 1.30 = 1300ft of plates (650 plates of the 2ft version or 325 plates of the 4 ft version).
• Note: Do not overlap the ends of the plates, make sure you have at least 2-3 inches spacing from end to end.

Made In The U.S.A.

All of the heat plates are proudly made in the U.S.A.

Manufactured with high quality aluminum.

Dimensions

48 inches Long

4.31 inches Wide

.016 inches Thick

Flushed PEX

Once the PEX is installed the pipping is flushed on the plate.

U Channel/Shape

With the U shape channel design its easy and fast to install 1/2" PEX onto the plates.

Can be stapled and screwed onto the surface.

• PEX-B
• 1000' PEX PIPE: This CO-Z PEX-B tubing comes as a 1000 foot coil of hose to cover all your home improvement needs, whether radiant heating for your floor or snow-melting system, water lines for your home or camper, or other plumbing or HVAC uses.
• SUPERIOR DURABILITY: Our PEX plumbing and HVAC pipe offers durability superior to copper, iron, and steel competition, impervious to corrosion and able to withstand cold temperatures to -40F, high temperatures to over 200F, and high pressures (160 psi at 70F, 80 psi at 200F).
• HIGHLY FLEXIBLE: This PEX tubing has a 5" bend radius, allowing you to run it to your fixtures anywhere you need as a single line without needless junctions and the maintenance problems they bring.
• EASY INSTALLATION: Our 1000' PEX hose accepts multiple connection methods to work with your existing pipes without any need for welding; easily employ copper crimp fittings, expansion connections, stainless steel clamps, compression fittings, push-to-connect fittings, and more.
• SATISFACTION GUARANTEED: Order with your peace of mind assured by CO-Z's usual strong warranty and friendly 24/7 customer service.

Product features

CO-Z PEX Water Pipe 1/2 Inch PEX-B Plumbing Tube 1000ft Radiant Heat Tubing

Vastly superior to its copper and steel competition, its versatile PEX-B construction works with water temperatures from -40 to 203F; resists corrosion, leaks, condensation, and cracking; and handles high pressures with ease. Ideal for central AC, radiant floor heating, and solar heating systems, this 1/2-inch PEX pipe is also super flexible.

1000 Feet Industrial PEX Pipe

⅝″ Outer Diameter, ½″ Inner Diameter, 0.07″ Thickness, net weight: 56.2 lb. (25.5 kg). Anti-Crack, Anti-Leak. For all your HVAC and plumbing needs, you can do no better.

Premium Material

Made of flexible PEX-B, our leakfree pipe withstands both low and high with ease, making it ideal for radiant floor heating or for use as water pipes.

Superior Flexibility

Our PEX tubing adjusts to different temperatures, protecting it from cracking in frigid or torrid conditions. Its 5″ bending radius provides superior flexibility for any job.

• 【RELIABLE QUALITY】- Color: Red; Nominal Diameter: 1/2"; Total Length: 300ft. Outside Diameter: 0.625"; Inner Diameter: 0.485"; Keep quick & smooth hot/cold water flows. Made of PEX material, , crack-resistant, leak-proof. Perfect for potable water or radiant floor water use.
• 【ROBUST O2 RESISTANT】- Unique EVOH layer, stop O2 into the tube, protect metal components from corrosion. Heating system's service time can be greatly lengthened. Smooth inner pipe, anti- scaling quality, increase heat dissipation efficiency & speed for energy-saving.
• 【EFFORTLESS INSTALLATION】- Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings); Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings); Press system (by Viega); Compression PEX Fittings.
• 【PREMIUM FLEXIBILITY】- Min.5" bending radius, easy to bend for different ground situation. Big pressure capacity: 80psi @ 200℉, 100psi @ 180℉, 160psi @ 73℉. Thus to ensure its good temperature resistant, crack- & leakage-proof.
• 【DIVERSE USE SCENARIO】- Suit for home & commercial use, like: radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc.

User questions & answers

Question:	Is this pex tubing ethanol resistant? can i use it as a heating coil in a tank of 55% ethanol
Answer:	I would not use it with ethanol but with Polyethylene glycol anti freeze.
Question:	Is this third party tested or certified
Answer:	if you find a ASTM Code number printed yes and you can look it up
Question:	Can you deliver in San Luis potosi
Answer:	if there is a Home Depot or Lowe's you will find it there
Question:	Is this considered pex-a or pex-b? I would like to use my expansion fittings and tool I use for pex-a pipe
Answer:	I do not know the answer to that question

Product features

1/2" 300ft PEX Tube

Industrial-grade pex tubing, crack-resistant, leakage-proof and anti-aging after long year's use. Nominal Diameter: 1/2"; Tube Length: 1000ft, longer than normal products.

EVOH Oxygen Barrier

resistant to high temperature or cold weather. No leakage worry, dual used as radiant heating tube or potable water pipe.

5" Bending Radius

Expands and shrinks with temperature changes and support freeze resistant, this tube is with min.5" bending radius(industry standard for 1/2" pipe) and excellent flexibility.

Different Tube Connections

Can be connected in many ways: Crimp connection system(crimp tool + rings + fittings).; Cinch (clamp) connection system; Press system(by Viega); Compression PEX Fittings.

Compatible Install Method

Suitable for many floors, like: (non-) structural concrete slabs; staple-up (between joists) radiant floor heat; "Sandwich" type radiant heating; Snow & ice melting systems etc.

Commercial & Home Use

Multi-use water pipe, applied for plumbing, radiant & hydronic systems, and potable water. Keep quick hot & cold water flows. Red color just for easier identification.

• 300' PEX PIPE: This CO-Z PEX-B tubing comes as a 300 foot coil of hose to cover all your home improvement needs, whether radiant heating for your floor or snow-melting system, water lines for your home or camper, or other plumbing or HVAC uses.
• SUPERIOR DURABILITY: Our PEX plumbing and HVAC pipe offers durability superior to copper, iron, and steel competition, impervious to corrosion and able to withstand cold temperatures to -40F, high temperatures to over 200F, and high pressures (160 psi at 70F, 80 psi at 200F).
• HIGHLY FLEXIBLE: This PEX tubing has a 5" bend radius, allowing you to run it to your fixtures anywhere you need as a single line without needless junctions and the maintenance problems they bring.
• EASY INSTALLATION: Our 300' PEX hose accepts multiple connection methods to work with your existing pipes without any need for welding; easily employ copper crimp fittings, expansion connections, stainless steel clamps, compression fittings, push-to-connect fittings, and more.
• SATISFACTION GUARANTEED: Order with your peace of mind assured by CO-Z's usual strong warranty and friendly 24/7 customer service.

Product features

CO-Z PEX Water Pipe 1/2 Inch PEX-B Plumbing Tube 300ft Radiant Heat Tubing

Vastly superior to its copper and steel competition, its versatile PEX-B construction works with water temperatures from -40 to 203F; resists corrosion, leaks, condensation, and cracking; and handles high pressures with ease. Ideal for central AC, radiant floor heating, and solar heating systems, this 1/2-inch PEX pipe is also super flexible.

300 Feet Industrial PEX Pipe

⅝″ Outer Diameter, ½″ Inner Diameter, 0.07″ Thickness, net weight: 16.9 lb. (7.65 kg). Anti-Crack, Anti-Leak. For all your HVAC and plumbing needs, you can do no better.

Premium Material

Made of flexible PEX-B, our leakfree pipe withstands both low and high with ease, making it ideal for radiant floor heating or for use as water pipes.

Superior Flexibility

Our PEX tubing adjusts to different temperatures, protecting it from cracking in frigid or torrid conditions. Its 5″ bending radius provides superior flexibility for any job.

• 【PEX MANIFOLD】 - Material: Stainless Steel; Temperature Range: 95℉-149; No. of PEX outlets: 9 on the Supply PEX manifold + 9 on the Return PEX manifold; For use with PEX tubing sizes: 1/2"
• 【RADIANT HEAT MANIFOLD】 - Manifold trunk size: 1-1/4"; Valve inlet connections: 1" NPT; Distance between PEX branches (on center): 2"; Max. flow per individual branch: 1.4 GPM
• 【EASY TO USE】 - No PEX tools required. Use regular pliers or adjustable wrench to connect PEX tubing to the manifold. Pressure tested and pre-assemble. Simply mount the manifold on brackets and connect valves and PEX tubing.
• 【FLOW METERS】 - Comes with flow meters. PEX Manifold adapters not included.
• 【APPLICATION】 - This 9-branch 1/2" stainless steel manifold kit is for radiant floor heat systems. NOTE: NOT suitable for potable water applications.

Product features

Basic Information

There are twelve interfaces to connect various pipes. The max. operating temperature is 65 ℃ and the max. branch flow is 1.4 GPM, which is larger than ordinary steel pipes.

304 Stainless Steel

This radiant manifold kit adopts high-density 304 stainless steel material. It is resistant to corrosion & pressure and ensures a longer service life.

All Copper Spool

The all-copper spool of this product increases the life of the spool by more than 3 times compared with ordinary spools, and the water flow control is more precise.

Remote Control

The valve on the return manifold of the PEX boiler manifold corresponds to a thermoelectric head, which can remotely control the flow of each interface area.

Easy To Use

The manifold is pre-assembled, just use ordinary pliers or adjustable wrench to connect the PEX tube to the manifold. Quite an easy job to finish!!!

Wide Application

Whether it is 16PERT / 20PERT / 25PERT / 20PPR / 25PPR tube, it is compatible without special adapters. No 1/2" adapters/compression nuts.

9 Ports PEX Manifold Kit

The PEX manifold has a 304 stainless steel body material, which is resistant to corrosion and pressure and has a long service life. The manifold has passed pressure tests and is pre-assembled for installation. The precise design makes your hydraulic system unobstructed, and the control details make you worth choosing.

Product description

Features:

• Omega shaped 5/8": allows you to snap in 1/2" PEX pipe during installation. This channel shape offers more contact with tubing than U-shaped plates and has a better heat transfer.
• 5 inches wide is 10% Wider than the 4.5 inch competition.
• Increase Radiant Floor Heating System's efficiency and response time.
• Save time and labor - 4 ft long plates allow for 1-person installation.
• Thickness: 0.016" Inches (1/64)
• Material: Aluminum
• Quantity: 50 48" plates

• Omega shaped: allows you to snap in PEX pipe during installation. This channel shape offers more contact with tubing than U-shaped plates and has a better heat transfer.
• 5 inches wide is 10% Wider than the 4.5 inch competition.
• Increase Radiant Floor Heating System's efficiency and response time.
• Save time and labor - 4ft long plates allow for 1-person installation.
• Quantity: 50 48" plates

User questions & answers

Question:	Will 5/8 pex fit in these
Answer:	I doubt it and I don't have any 5/8 pipe to try and see.
Question:	Where is this aluminum heat transfer plate made
Answer:	I don't know. No markings on the box except the shipping label from the New York seller. No pamphlet inside. Having said that, they are pretty nice, the pipe does seem to "snap" into place but I have nothing to compare them with. I have some left over and if I ever needed more I would buy again. I hope that helps and go U.S.A.!!
Question:	do these come in two rows too
Answer:	Some brands do.
Question:	These are 48" long correct, see post of people receiving
Answer:	yes they are 48" long

• 600' PEX PIPE: This CO-Z PEX-B tubing comes as two 300 foot coils of hose (color coded red and blue) to cover all your home improvement needs, whether radiant heating for your floor or snow-melting system, water lines for your home or camper, or other plumbing or HVAC uses.
• SUPERIOR DURABILITY: Our PEX plumbing and HVAC pipes offer durability superior to copper, iron, and steel competition, impervious to corrosion and able to withstand cold temperatures to -40F, high temperatures to over 200F, and high pressures (160 psi at 70F, 80 psi at 200F).
• HIGHLY FLEXIBLE: This PEX tubing has a 5" bend radius, allowing you to run it to your fixtures anywhere you need as a single line without needless junctions and the maintenance problems they bring.
• EASY INSTALLATION: Our two 300' PEX hoses accept multiple connection methods to work with your existing pipes without any need for welding; easily employ copper crimp fittings, expansion connections, stainless steel clamps, compression fittings, push-to-connect fittings, and more.
• SATISFACTION GUARANTEED: Order with your peace of mind assured by CO-Z's usual strong warranty and friendly 24/7 customer service.

Product features

CO-Z PEX Water Pipe 1/2 inch PEX-B Tube Two Coils of 300ft Radiant Heat Tubing

Vastly superior to its copper and steel competition, its versatile PEX-B construction works with water temperatures from -40 to 203F; resists corrosion, leaks, condensation, and cracking; and handles high pressures with ease. Ideal for central AC, radiant floor heating, and solar heating systems, this 1/2-inch PEX pipe is also super flexible.

2 × 300 Feet Industrial PEX Pipe

⅝″ Outer Diameter, ½″ Inner Diameter, 0.07″ Thickness, net weight: 33.7 lb. (15.3 kg). Anti-Crack, Anti-Leak. For all your HVAC and plumbing needs, you can do no better.

Premium Material

Made of flexible PEX-B, our leakfree pipe withstands both low and high with ease, making it ideal for radiant floor heating or for use as water pipes.

Superior Flexibility

Our PEX tubing adjusts to different temperatures, protecting it from cracking in frigid or torrid conditions. Its 5″ bending radius provides superior flexibility for any job.

Product description

This is one roll of 500' 1" Oxygen Barrier PEX tubing. This tubing is primarily used in radiant heat applications along with other heating applications. While PEX has UV resistance, it should not be placed in the sun or have UV exposure. This tubing can be used in most radiant heating installations such as:Thick/Thin concrete slabsUnder sub-floor (between joist) with or without heat platesEngineered FloorStaple up or Staple downBaseboard and RadiatorSnow Melting SystemsSolar Heating Applications Compatible with the following fitting types:Push-Fit StyleCrimpCrimp ClampCompressionDoes NOT work with Expansion Fittings or Pex-Al-Pex fittings Certifications/Ratings/Approvals:ASTM F876/F877 StandardSDR-9 Dimension StandardDIN 4726 StandardNominal Size- 1"Inside Diameter- .863"Outside Diameter- 1.125"80 PSI at 200F100 PSI at 180F 25 year Warranty on all PEXworx Tubing

User questions & answers

Question:	Can this item be used for potable water
Answer:	Yes it can! That is what I am using it for...

Product description

This is a roll of Gunine PEX GUY Radiant tubing with Oxygen Barrier PEX piping in Red.



Radiant Heating PEX tubing can be used in most radiant heating installation method such as:

-Thick/Thin concrete slabs,

-Under sub-floor (between joist) with or without heat plates

-Engineered Floor

-Staple up or Staple down

-Baseboard and Radiator

-Snow Melting Systems

-Solar Heating Applications



-Certifications and Ratings:

-SDR 9 Standard

-ASTM F876/877

-NSF certified for Radiant Heating (North America Certification)

-CSA 137.5 (Canadian Certification)

-Warnock Hersey Canada (Canadian Certification)

IAMPO

-UPC

-TUV (German Certification)

-DIN 4726 (European Standard)

-Pressure ratings: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F by PPI

-25 year industry standard warranty



Compatible with:

-Compression Fitting Systems

-Crimp Fitting Systems

-Clamp Fitting Systems

-Sharkbite Fitting and other similar systems

-

User questions & answers

Question:	what is the difference between pex A,pex B,pex C
Answer:	All of the PEX we carry is manufactured in the PEX-B method. Also, I want you to know that it is not so much a indicator of quality or "grade" of the PEX; instead it represents the process of production each is made with. They are differentiated by how the manufacturing process of cross linking the molecules of polyethylene rather than it being graded or rated as A, B and C grade. PEX A method was developed in the 1960's using peroxide method to cross link the molecules, PEX B was developed in the 1970's using silane method and PEX C was developed in the 1980's using electrobeam method. The best way to tell if it is a good quality product is the NSF certification and testing that it pass. Here in North America, NSF is the testing agency and they test them to ASTM standards. If you see NSF certification on the PEX to ASTM F 876/877 then it is a quality product. Also, it must hold at least a 25 year warranty. Needless to say, our PEX meets those standards. PEX A, B and C are tested the same way and comply to the same ASTM standards. Meaning, the same temperature pressure rating will be on PEX A, B and C. So it all boils down to price and contractor preference. Please feel free to contact us if you have any questions or if you need anything else. Thank you. PEXCompany Direct: 1-909-606-0988
Question:	how flexible is this. I want to use it for in-wall heat and run it through the studs, down the wall height and back up then through the next stud
Answer:	It's made to run under floors between joist you won't get much heat out of it in the wall
Question:	What is the manufacturers recommendation for insulating foam? Does it require foam under the entire slab, or only the perimeter
Answer:	Hi density foam boards are the best but can be pricy. Insulation sheets are used. Check with your city what R-value your area requires and by accordingly. As to if you need foam in the entire slab or just the perimeter. Under normal circumstances about 99.5% of the time , the whole slab needs to be insulated. It is a very rare and you have to have a radiant heting designer if the insulation is just in the perimeter. You are creating a huge heat sink that will take long for your area to heat up and you have a huge heat sink that might cause overheating of your area that you cannot control. I strongly suggest caution if you are going with the perimeter route.
Question:	Is this pex-a, pex-b, or pex-c
Answer:	All of our PEX for Radiant Heating is PEX-C with Oxygen Barrier formulation. Jim, Sales Mgr. J&R Enterprises

• Genuine PEX GUY Brand plates
• Proudly Made in USA
• 24 inch long (2ft) Aluminum Plates for 1/2" PEX piping
• Dimensions: 24" Long x 4.31" Wide x .016" Thick
• 0.016 Thick High Quality Aluminum Heat Transfer Plates

User questions & answers

Question:	how to install
Answer:	There are too many ways to install heat transfer plates for radiant heating depending on your situation and application, consult your radiant heating contractor on what is best for your application. I will discuss the most common 2 methods for you to have an idea/guide.1. Staple UpTubing is attached to the underside of the existing subfloor. Aluminum plates can be used to spread the heat evenly under the subfloor. Insulation is placed in the joist space beneath the tubing. A 2 inch air space is usually left between the insulation and the bottom of the subfloor. If aluminum plates are used which significantly cover the underside of the subfloor, the insulation may be pushed up tight against the plates. Obviously, care must be taken when nailing any floor covering from above. Wood screws are typically used to attach the plate to the underside of the subfloor but nail gun works fine as well.2. Subfloor PlatesAluminum plates supported by wood or plastic spacers contain channels which accept tubing. These plates spread the heat uniformaly beneath the finished floor. Hardwood floors can be nailed directly to the subfloor plates or carpet and pad placed over the plates. It is also possible to nail a second subfloor over the plates for a smoother finish for vinyl areas. A cement board is used when tile or stone is to be installed. Particle board is not recommended as a subfloor.
Question:	can this product be stappled up
Answer:	Yes it can. I useed my 18 gauge stapler with 1/2" staples and made quick work of the project. I put staples every few inches to get a good heat transfer from the pannel to my sub-floor. If there is a space btween your pannel and the floor your wasring heat energy.
Question:	Is a 3/4 inch curve in these plates available
Answer:	Unfortunately no.
Question:	how wide are these
Answer:	4-3/8" exactly. They are made with 5" plates and after the machine makes the curve, it will be 4-3/8" wide. Hope that is helpful

Product features

PEX GUY 2 ft Long Aluminum Heat Transfer Plates (100 pcs)

These PEX GUY Aluminum Heat Transfer Plates are for 1/2″ PEX piping to help distribute the heat evenly throughout your radiant heat flooring. The PEX piping lays into the grooves of these plates and helps distribute the heat more evenly under your floor.

Specifications

• Manufactured at ISO 9001
• Compliant with AB1953 (No Lead / Lead Free laws) in the USA

Made In The U.S.A.

All of the heat plates are proudly made in the U.S.A.

Manufactured with high quality aluminum

Dimensions

24 inches Long

4.31 inches Wide

.016 inches Thic

Residential & Commercial Applications

Perfect for under-floor heating systems in residential, commercial and industrial settings.

All PEX

Will fit and can be used on any type of PEX piping (SDR-9 sizing standard) for use in North America.

Viega, Wisbro, Uponor, Watts, ReHau, Efield, Everhot, Zurn, Nibco, Bow, etc