13 best metal cutters

Product description

Crescent Wises has taken the aviation snip to the next level with the advanced metal Master aviation snips. The precision cast molybdenum blades have conk ground Serrations which allow for more uniform Serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free float design. The spring action design allows for fast, effortless feed. The all new latch design provides ergonomic single handed operation for left or right handed users. New extended non slip handle grips give users better control while cutting. The new generation of Crescent Wises metal Master will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional aviation snips. They are available in left/straight cut, Right/straight cut, and straight cut.

From the Manufacturer

Wiss compound action snip with serrated blades to grab hold and aggressively cut through material, compound action to multiply the hand's force by five times and a self-opening spring action for a smooth low effort feed. The industry standard - the professional’s choice.

• Cuts straight and slight curves with yellow handles for quick identification
• Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring action for fast, effortless feed

User questions & answers

Question:	Would these be good for cutting the rusted metal off of autos, or should I be looking for a different type/angled cutters
Answer:	Did not really understand the question. This cutter works nicely and I am happy I bought it. Don't know anything about 3 piece or made USA.
Question:	Dear Seller!! Wiss M3R, It's includes 3 piece and made USA?! let me know, please! Thanks
Answer:	The packaging in the image appears to indicate that it'll cut 18-gauge.
Question:	Will this shear able to cut precious metal sheets up to 20 gauges and thinner?? I am a jeweler designer and using saw is pain in the neck and time con
Answer:	These snips will cut a penny. Hold the coin with a pair of slip-joint pliers as it has a tendency to twist. That made things much easier.
Question:	will this cut a penny in half
Answer:	this is only tightener, both ends of straps are getting in, this tool is making need tension between both ends. It is not cutting, it is not binding at all. For binding you need clamps and clamping tool.

Product features

Next Generation Aviation Snips

Snips made to earn the trust of a new generation. Continuous improvement means never being satisfied. That’s why these new Next Generation snips last 60% longer and require 20% less force to cut on average compared to our snips from just five years ago.

• Precision cast molybdenum blades with CNC-ground edges and serrations for cutting low carbon, cold-rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single-handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring-action for fast, effortless feed
• Handles have built-in stops providing consistent operation and blade opening
• Ergonomic, single material non-slip handle grips provide excellent control and easy cleaning with built-in hang hole for convenient storage
• Designed, Engineered, and Manufactured in the USA

Product description

Sheet metal snips are designed to cut various thicknesses of stainless and cold-rolled steel. Offset blade models help keep material away from hands while cutting. All models feature an auto-release mechanism for fast one-handed operation. Large handle rings and double dipped grips on the Tin Snips are designed for more comfortable use. Snip models include: offset long-nose, duckbill, 3-piece aviation set, offset left-cut, offset right-cut, straight-cut, right-cut aviation, left-cut aviation, straight-cut aviation, and 10-inch and 12-inch tin snips.

• CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel.
• EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation
• DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws).
• 1/4-inch blade markings for quick precise cuts
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Are these serrated - Leaving a serration on the metal
Answer:	No, the CMHT73756 are not serrated.
Question:	Are these stainless steel
Answer:	I think so, but not sure.
Question:	How do i warranty these cutters
Answer:	Amazon would handle the warranty on this unit. You can also contact CRAFTSMAN Customer Service at 1-888-331-4569 for further assistance.
Question:	Will this cut through 14 guage galvanized mesh wire
Answer:	Yep it will. The blades don’t open as wide as most do so it isn’t the best for longer metal cuts.

Product description

This WORKPRO bolt Cutter is featured with molybdenum steel jaws, compound cutting action requires less effort. Bi-material soft handle for comfortable cutting.

• Note: cutting locks is not recommended
• Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long life. Ergonomic bi-material Anti-slip grips provide greater control and comfort in cutting
• Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effort
• Cutting Capacity: HRC≤42: 7/32-inch(5mm Maximum)；HRC<25: 1/4-inch(6mm Maximum)
• Ideal for cutting soft metal, bolts, rods, rivets and chain

User questions & answers

Question:	What size workpro bolt cutter would be right for an 8mm bolt? will the 24" cutter work? would like to hear from the seller, if possible
Answer:	Get the biggest one you can handle the small ones don't have enough leverage.
Question:	Roofing nails protruding through sheathing in garage attic. Can I use this bolt cutter to snip them off
Answer:	Bolt cutters won't work--you CAN NOT cut them off flush and it will look crummy. I had the same problem with roof nails protruding into my attic by a poor roofing job--looked like a porcupine. I cut the nails flush with 14" "hoof nippers" made by Diamond Tool and Horseshoe in Minnesota. You will need 14" inch for the leverage. They work great!--but they are kinda spendy... but will last a lifetime.
Question:	Will these cut a large(14/0) fishing hook
Answer:	It can cut the wire with diameter of 3/16-inch, could you compare with your fishing hook? If your hook is thicker than 3/16-inch, it's hard to cut.
Question:	What size would be best for cutting bike locks, say 15 per night, for months
Answer:	The best option would be a 14-in size bolt cutter. Just large enough to cut a large lock but not so heavy that you can't run fast when holding it. Great question

Product features

WORKPRO W017004A 14-Inch Bolt Cutter

Using the WORKPRO 14-inch bolt cutter to cut bolts,rods, wires, rivets and chains up to 3/16 inch wide.

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

From the Manufacturer

The compact bolt cutters have lever action center cutters to cut material such as bolts, nail and rivets up to 5.2 mm. The lever action designed mechanism provides a lever ratio with low friction. This results in a cutting performance 20 times higher than the hand force applied. Required 61% less effort. The cutting edges are induction hardened at approximately 64 HRC to cut through soft wire up to 6.0 mm; medium hard wire maximum 5.2 mm; hard wire up to 4.0 mm and piano wire up to a maximum diameter 3.6 mm.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	will this cut through 16 gauge wire fencing
Answer:	You mean Kennel Fencing. The jaws of this product are designed and hardened to cut through metal fencing of which 16 gauge wire is the standard garden fencing. According to the manufactures ads and countless videos and myself included, they seem very happy to cut through 16 gauge wire - effortlessly and without destruction of the jaws cutting edge.
Question:	Can these be used to cut through aluminum alloy sheets? 7075-T
Answer:	Yes,I believe they will,the drawback would be very short cut strokes,the knipes are a very effiecent tool for cutting single strand wires of varying sizes..
Question:	Can this cut the standard shackle of a padlock? What is the maximum cutting diameter
Answer:	I think you would damage the cutting surface trying to cut a padlock. I am not sure what the maximum cutting diameter is
Question:	Who makes this tool
Answer:	Knipex of Germany. Outstanding little cutter. They make a lot of quality hand tools.

Product features

Knipex 71 01 200 8-inch CoBolt Compact Bolt Cutter

An all-around tool for the toughest demands, this Knipex high-leverage CoBolt cutter features a lever action design that applies 20 times more hand force for superior cutting power with less effort. This mini bolt cutter can cut through more than you ever thought possible — up to 1/4-inch diameter with ease. It's ideal for automotive or construction applications, cutting cotter pins and nails, repeated use in factory assembly lines, cutting wire fencing in agricultural settings, or even everyday tasks such as cutting floral wire or fish hooks.

Forged from chrome vanadium electric steel, these cutters are built to last. This lightweight cutter features precision-matched cutting edges for cutting soft or hard steel.It also features gripping jaws below the joint for gripping and pulling nails and wires.

Quality in Every Detail

Sometimes we give our pliers a really hard time. We try to destroy them to find out what makes them good and long lasting. Because we don't want to leave anything to chance, we take a long, careful look.

The steel Knipex uses is precisely hardened with a maximum of 0.8% carbon and defined parts of chromium and vanadium, guaranteeing optimum cutting performance and service life — even though it requires special production and costs a bit more. But our high product demands require this.

Knipex also looks closely at the small details. The angles, the sharpness, the hardness, the toughness of the cutting edges. The precision and smooth movement of the joint. The handle design and the finish. We keep reviewing these subjects, we research, we test, and we improve our pliers.

Exceptional Cutting Performance With Minimal Effort

Easy Cutting Of Any Wire Up To 1/4-inch

Precision, Induction Hardened Cutting Edges

Gripping Jaws For Gripping And Pulling Nails And Wires

Product description

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

• Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
• Attack up to 20 gauge stainless steel and 18 gauge sheet metal
• Lightweight design limits fatigue during operation
• Utilizes a powerful 4-amp motor, curling the metal as it cuts
• Swiveling head rotates a full 360 degrees to meet the needs of any project

User questions & answers

Question:	Will it cut the plastic on a truck truck bedliner
Answer:	I found it cuts vinyl soffit with no trouble, neat, efficient and quick. I think they are similar.
Question:	will this cut the alum side panels on enclosed trailer
Answer:	Easily, I've used it on 1/8th thick T6 alum without any issues.
Question:	Does it come with a case
Answer:	Mine did not come with a case.
Question:	How well will this cut 29 gauge galvalume rib steel roof panel? i see the spec for 18 gauge metal
Answer:	I cut 28 gauge steel with it with no problem 29 gauge is thiner yet ( smaller the # thicker the steel ).

Product features

Shear Metal. Sheer Power.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

360-Degree Swivel Head

Pivot the head 360° to help accommodate comfortable cuts from any angle or direction.

Cut up to 18-Gauge Metal

The powerful 4-amp motor slices through 18-gauge sheet metal and 20-gauge stainless steel.

Variable Speed Operation

The pressure-sensitive trigger varies the strokes per minute from 0 to 2500 SPM depending on the pressure applied.

Double Cut Design

The double-cut blade configuration creates a 1/4-inch ribbon of curled metal during operation.

Lightweight Design

The lightweight ergonomic design weighs in at a mere 4.7 pounds, limiting fatigue during operation.

3-Inch Turning Radius

Cut circles with radiuses of 3 inches and up to help take on projects with a lot of turns and curves.

Product description

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

• Able to cut up to 18GA material
• 360 degree swivel head for maneuverability
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills
• Able to cut up to 18GA material
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills

User questions & answers

Question:	Does this tool work on Bosch portable drills and impact drivers
Answer:	DWASHRIR works with most 18V-20V impact driver and drill tool brands.
Question:	Will it fit Bostitch
Answer:	Connects via standard 1/4-inch hex shank Compatible with most 18V-20V impact driver and drills
Question:	Can it cut through angle iron, and a garage door track
Answer:	Itsmat the most it will cut is 18 gauge sheet metal
Question:	Will it fit on a makita impact drill
Answer:	Well It just happens that I am using the shears with one of the many Makita impact drivers but it wasn't without a little preparation. The clamping mechanism off the arm has the two pins that insert into retaining holes on the drill body, but mine did not have them so I simply bore a hole on each side in places that the pins could go. It took me about 5 minutes. Now it fits fine and works very well.

Product features

DWASHRIR Impact Ready Shears Attachment

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand.

Product description

This Makita nibbler features a 360-degree rotating die, large 1/4in. stroke, sliding switch for continuous use, built-in thickness gauge and easy punch and die replacement. Includes wrench and hex wrench. Cordless: No, Cutting Capacity Mild Steel (gauge): 16, Cutting Capacity Stainless Steel (gauge): 18, Cutting Depth (in.): 1/4, Volts: 115, Inside Cutting Radius (in.): 1 3/4, Strokes Per Minute (SPM): 2,200, Cutting Capacity Aluminum (gauge): 10, Amps: 5, Outside Cutting Radius (in.): 2. Cord Length- 6.4 feet.

• Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
• Die rotates 360°
• Large 1/4"" stroke
• Ergonomic, slim body design for easy gripping
• Extremely light (weighs only 3.6 lbs.) for easy handling.Overall Length : 10.25 inches
• Lock-on sliding switch for continuous operation
• Built-in thickness gauge for convenience

User questions & answers

Question:	has anyone ever cut 16 ga. steel with this? 18 ga
Answer:	I have cut 18ga. Very easy cuts. I feel it would handle 16 gage.
Question:	Can this nibbler cut 1/8 aluminium sheet metal
Answer:	No. The on line manual states it can only do 10 gauge aluminum or 0.101 inches.
Question:	Is there a Hard case for storage this tool
Answer:	The one I bought through amazon did not come with a hard case
Question:	Which is better? A shear or a nibbler? What will one do that the other can't? Kind of confused
Answer:	A nibbler can go in smaller circles and do more intricate work. A shear you will have a strip of sheet metal to deal with as you cut. I think the nibbler is better on thinner metal and shear on thicker. Hope this helps.

Product features

Makita JN1601 16 Gauge Nibbler

The Makita JN1601 Nibbler die rotates 360 deg. The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience. The JN1601 has an easy punch and die replacement for less down time.

Control

Lock-on sliding switch for continuous operation

Convenience

Die rotates 360°; large 1/4" stroke

Capacity

Cuts up to 16 gauge mild steel and 18 gauge stainless steel

Power

5 AMP motor delivers 2,200 SPM

Product description

Material: 

55#Stainless Steel(Blade) 

PP+TPR(Handle)

Total length: 25cm(10'')   

Blade length: 4cm(1.57'')

Cutting Capacity:  

Cold Rolling Steel: 1.2mm 

Stainless Steel: 0.8mm

 

Type: left cut, right cut, straight cut,

Safety: Locking latch prevents damage to cutting edge when stored

Package include : 1 * right cut scissor

                             1 * left cut scissor

                             1* straight cut scissor

• 3 Pack set - Includes left, right, and center cut offset models,so you can cuts from any angle.
• High quality blades - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability.
• Comfortable Grips - Anti-rust CRV grips conforms with the motion of the user’s hands and the indented ribs prevent hand and finger slippage.
• Multiple Usage - Ideal for cutting aluminum,sheet metal,leather,floor covering,card board and plastic.
• Easy Cutting - Compound leverage multiplies handle force to cutting blades by 7:1 for significantly less fatigue.  After multiple tests,non-slip grip is easier to use and more stable.

User questions & answers

Question:	Will these cut through Stainless Steel
Answer:	Yes. it comes with all three. Straight, left, and rights cuts.
Question:	What is the aviation shear used for
Answer:	I've used them to gutters, tin, and different thin metals. The thickest metal I've used them on was a roll of framing strap but I'm not sure on the gauge. It did a good job on it.
Question:	Will it come with all
Answer:	Yes it will. This is a two handed process. Rotate work piece to follow your scribed radius while actuating shear handle. With practice you can get quite good at it.
Question:	Are they strong enough to cut through 24 gauge metal sheets
Answer:	This unit does not have an edge guide, you might be better off with their combo Shear/brake depending on the size of plates you're cutting as it has an adjustable backstop for shearing.

• Hurricane 02-024 10 Inch Aviation Tin Snips, Straight Cut
• Material: Chrome Vanadium Steel, Serrated edge blades with sanding finish
• Handle: Bi-color handle with rubberized grip for comfort and control
• Safety: Locking latch prevents damage to cutting edge when stored, Cuts up to 1/16"(1.8mm) cold-rolled steel sheet
• Yellow Straight Cut

User questions & answers

Question:	Will they cut 0.1mm spring steel
Answer:	You can use it for 0.1mm spring steel
Question:	Do you think these will cut carpet
Answer:	I bought it to cut tin, very short cut length and not a straight line, curves on the end. I wouldn’t recommend for carpet
Question:	Would this cut imagitarium 10-gallon terrarium screen
Answer:	It would 100% be able to cut screen. Super easily. I've used it to cut wire coat hangers, fencing, trees of heaven stems that were over one inch thick (so the lantern flies can't eat them), all sorts of things. Definitely would work for screen. Not sure about being able to cut through the edges that hold it together though.
Question:	Do you think they can be used to cope emt conduit
Answer:	How thick is the conduit? I don't think they could handle it, but I feel like I saw my neighbor use a hacksaw.

Product features

Hurricane 10 Inches Aviation Tin Snips Set, Straight

Hurricane 10 Inches Aviation Tin Snips Set, Straight, for Steel, Aluminum, Leather, Copper. lets you make cuts from any angle; it's the right solution for getting at hard-to-reach angles and tight spaces. Cuts through many types of metal very smoothly,is ideal for completing a cutting job with ease and precision for any job.

Hurricane 10 Inch Aviation Tin Snips, Straight Cut

10-Inch Aviation Tin Snips

Material: CRV serrated edge blades with sanding finish;

Handle: Bi-color handle with rubberized grip for comfort and control;

Safety: Locking latch prevents damage to cutting edge when stored,

Cutting Figures: Cuts up to: Cold-Rolled Steel Sheet 15 Gauge, Carbon Steel 18 Gauge, Stainless Steel 22 Gauge, Copper 17 Gauge, Aluminum 16 Gauge;

Cutting code: Yellow Straight Cut

TryeGrip Series Handle

Ergonomic Non-Slip Soft Grip Handle

Durable Cutting Edge

Premium Alloy Steel Serrated edge blades with sanding finish;

Cutting Figures: Cuts up to: Cold-Rolled Steel Sheet 15 Gauge, Carbon Steel 18 Gauge, Stainless Steel 22 Gauge, Copper 17 Gauge, Aluminum 16 Gauge;

Cutting code: Yellow straight cut

Safety Locking Latch

Locking latch prevents damage to cutting edge when stored,

Product description

The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor.

- 4.0 Amp Motor

-360° Swivel Head for cutting curves in sheet metal

-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge

-Three blades work to reduce metal deformation

-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel

Genesis' two year warranty means you buy with confidence. Cord Length- 72 inches.

• Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
• Powerful 4.0 amp motor
• 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
• Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
• Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!

User questions & answers

Question:	i need to cut felt padding for carpets. Will this do the job without fraying the cloth
Answer:	No, capacity for mild steel is 14 GA.
Question:	Will tjis cut plastic
Answer:	DCS494M2 includes (2) 4 Amp hour batteries and (1) charger.
Question:	Will it cut dimensional asphalt roof shingles
Answer:	Dewalt makes an adapter (Dewalt DCA1820) that allows you to plug their newer 20V batteries into the older style 18V tools; (but you will need the adapter and a 20V battery starter kit (like Dewalt DCB205-2CK) so you can charge the batteries) by James Perdue HVAC contractor
Question:	Does this machine use 220V? Thanks
Answer:	"I think if you would cut with a 1/2" grinder all the way around, then use this tool to trim off the burrs, you would have a nice cut. I use this to make cuts for metal roof installations. I've not used it in steel duct. It is an excellent tool." (I am quoting my construction contractor husband.)

Product features

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear

Features:

• Quickly Cuts Metal Roofing, Flashing, and other Sheet Metal up to 14 Gauge
• Powerful 4.0 Amp Motor
• 360° Swiveling Head for Cutting Control and Convenience
• Variable Speed (0-2500) SPM for Versatility in Cutting a Variety of Materials
• Three-Blade Cutting System Reduces Metal Deformation
• Cutting Radius of 5-1/2″ and Larger
• Lock-On Switch for Extended Use
• Built-in Belt Clip
• Includes: Hex-Key for Easy Blade Replacement

Product description

Cut bolts, chain, threaded rod, and heavy gauge wire up to 3/16 in. Diameter with the TEKTON 8 in. Mini bolt and wire cutter.

• Forged and Hardened alloy steel jaws
• Compound cutting action requires less effort
• Rolled steel handles with cushioned nonslip rubber grips
• Cuts bolts, chain, threaded rod, and heavy gauge wire up to 3/16 in. Diameter

User questions & answers

Question:	would these cut through a padlock
Answer:	It of course depends on the size of the padlock and the type of steel, but I do not think the 8-inch Tekton would do the job. These are fairly small. I have a "big brother" to the 8-inch Tekton and it might not even be enough. Look at the product description; many times the recommended size/diameter of wire/steel rod that the tool can cut is listed. Sorry that I could not provide a better answer.
Question:	Would the 12" work for cutting Closetmaid shelving racks
Answer:	I have the 9" and it cuts the clothes wire hangers real easy, but I don't have the 12" although the 12" is good for cutting bolts and locks so I think it shouldn't have problem cutting wire shelf hangers.
Question:	How come the 8-inch capacity is 3/16" and the 12-inch is 5/32"? 3/16" is bigger than 5/32", correct
Answer:	If you look at the pictures the 8" has a slightly different jaw design than the rest of the line. You'd have to take some measurements but the jaw geometry is probably slightly different allowing a larger opening (if scaled down proportionally like the rest of the line, it'd only have a 1/8" opening which isn't too useful. For wires or bolts that thin you could use any other cutting tool as well, so they probably had to change things up to make an 8-inch sized cutter useful.
Question:	Does it cut a master padlock
Answer:	I tried it on a ABUS 64TI/40 Titalium Aluminum Alloy Padlock and the Nano Protect Steel Shackle and the padlock just laughed at me while putting indentations on the bolt cutter blades.

Product features

TEKTON 8-Inch Mini Bolt and Wire Cutter | 3386

Cut bolts, chains, threaded rods, and wires up to 3/16 in. wide using the TEKTON 8 in. Mini Bolt Cutter.

Mini Bolt and Wire Cutter

Cut bolts, chains, threaded rods, and wires up to 3/16-inch.

Compound Hinge

Compound cutting action and drop forged hardened alloy steel jaws deliver superior cutting power.

Comfortable Grips

Strong, high-leverage tubular steel handles won't twist or give under load. Soft rubber grips offer non-slip comfort.

Product description

As a manufacturer of manual tools, MFIROZ Tools focuses on producing high quality, professional-grade tools that can provide excellent performance. This is an indispensable tool in cutting work.

We commit ourselves to provide the best Tin snips for all our dear customers forever and ever! No more hesitation! Try it now!

Advantage

1. Ergonomic grips with slip guards to protect knuckles & fingers.

2. With its high-leverage compound cutting design, the metal snips offers exceptional force.

3. Bilateral serrations can distribute cutting forces across the jaws, thereby improving cutting quality and tool life.

4. The superior design prevents tears at the end of cuts by controlling blade bypass and minimizes folding and burrs.

5. Our metal cutting shears tool comes with some oil to work more smooth and protect the tool.

Product Details

Product Name: Tin snips

Color: Black and yellow

Size: 10IN*3IN

Material: Carbon steel

weight: 12.5 Ounces

Package included: 1 x Aviation tin snips

Cutting specifications: Cold-rolled sheet0.06IN, stainless steel0.04IN

Warm Tips

1. Please do not directly touch the blade part with your hand.

2. Do not use in cutting high hardness materials etc.

• 【High Quality Material】 The metal scissors are made of premium chrome vanadium steel processed with a high-frequency heat treatment. The high-tensile strength steel tool efficiently converts manual pressure into impressive cutting power.
• 【Ergonomic Design】 Metal shears dynamically conforms with the motion of the user's hand like a good fitting pair of gloves. The non-absorbent material has a soft touch and feel without being tacky. Non-slip ribs are spaced to prevent palm or finger slippage.
• 【Wide Use】 MDIROZ wire snips are ideal for cutting metal sheets, it also can be used to cut various hard materials like aluminum, plastic plates, vinyl siding, cardboards, wire mesh, copper, leather, rubber and so on.
• 【Safe & High Efficiency】 The metal safety lock is between the strong handles. It's easy to open and close for convenient security system. Serrated cutting edges prevent materials from slipping during use. It's safe and easy to do metalworking!
• 【Perfect After-sales Service】 If for any reason you decide not to like it, you will get a full refund. We always put custome's requires to the first place. Your advice make us progress and your happy is our greatest power.

Product description

Variable speed dial, all ball-bearing motor for long life, head swivels 360 degrees, cuts 7/32" strip which continuously curls out of cutting area for clear line of sight, cuts radius of 5-1/2" and larger. Specs: Max watts out 470W, strokes/Min 0-2, 500 SPM, capacity in: (mild steel) 18 gauge (stainless steel) 20 gauge, replacement parts: left/right blade, center blade, 9.1&Quot; long, weighs 5.0 lbs.

Cutting through metal is a simple process if you have the right tool. Quickly slice your way through sheets of metal with the innovative DEWALT DW890 18 gauge electric shear with pivoting head. Powerful and easy to operate, the DW890 features a hearty 5 amp, all ball-bearing motor for enduring nonstop use and multiple speeds so you can adjust your tool for various metal widths. For increased precision, this shear also features a 360 degree pivoting head and operates without losing sight of the cutting line. For best results, use the DW890 with a maximum 18 gauge for low carbon steel and 20 gauge for stainless steel.

From the Manufacturer

The DW890 18-gauge swivel head and shear provide extraordinary power and versatility, cutting sheet metal with a scissors-like action quickly, accurately, and easily while providing good visibility to the cutting line. These shears feature high-output motors for long life in continuous-duty applications. Users can rotate the unit's 360-degree swivel head for optimum cutting convenience while the variable speed facilitates adjustments to thickness of metal the user is cutting. The DW890 is ideal for mild steel of 18 gauge and thinner and stainless steel of 20 gauge and thinner.

Features

• Powerful 5 amp, all-ball-bearing motor for long life
• Head swivels 360 degrees for cutting convenience
• Cuts 7/32-inch strip, which continuously curls out of cutting area for clear line of sight
• Variable speed permits cutting metals of a wide variety of thickness
• Cuts radius of 5-1/2 inches and larger

Specifications

• Amps: 5 amps
• Max. watts out: 470 watts
• Strokes per minute: 0 to 2,500 spm
• Capacity (mild steel): 18 gauge
• Capacity (stainless steel): 20 gauge
• Tool length: 9.125 inches
• Tool weight: 5 lbs.

Warranty

This DeWalt high-performance industrial tool comes with a warranty package that includes:

30-day, no-risk satisfaction guarantee

One-year free service contract

One-year warranty

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Powerful, 5.0 Amp, all ball-bearing motor for long life
• Head swivels 360 degree for cutting convenience
• Cuts 7/32-inch strip which continuously curls out of cutting area for clear line of sight
• Variable speed dial allows user to vary speed for specific materials and various applications (100-350 spm)
• Cuts radius of 5-1/2-inch and larger

User questions & answers

Question:	Will these cut 29 gauge metal roofing
Answer:	No. Just the tool
Question:	Will this shear cut alumium that is .125 inches aka 11 gauge
Answer:	Yes, this will work for your application (cutting capacity in mild steel is 18 gauge). No this is not equipped with a brushless motor.
Question:	I've seen guys cut through Hardie Plank Siding with electric shears, could these tackle a job like that
Answer:	How do I get new blades for DeWalt dcs491
Question:	Is a case included
Answer:	We offer many different storage options with our TSTAK® and TOUGHSYSTEM®.