14 best cutting metal roofing with nibbler

Product description

This Makita nibbler features a 360-degree rotating die, large 1/4in. stroke, sliding switch for continuous use, built-in thickness gauge and easy punch and die replacement. Includes wrench and hex wrench. Cordless: No, Cutting Capacity Mild Steel (gauge): 16, Cutting Capacity Stainless Steel (gauge): 18, Cutting Depth (in.): 1/4, Volts: 115, Inside Cutting Radius (in.): 1 3/4, Strokes Per Minute (SPM): 2,200, Cutting Capacity Aluminum (gauge): 10, Amps: 5, Outside Cutting Radius (in.): 2. Cord Length- 6.4 feet.

• Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
• Die rotates 360°
• Large 1/4"" stroke
• Ergonomic, slim body design for easy gripping
• Extremely light (weighs only 3.6 lbs.) for easy handling.Overall Length : 10.25 inches
• Lock-on sliding switch for continuous operation
• Built-in thickness gauge for convenience

User questions & answers

Question:	has anyone ever cut 16 ga. steel with this? 18 ga
Answer:	I have cut 18ga. Very easy cuts. I feel it would handle 16 gage.
Question:	Can this nibbler cut 1/8 aluminium sheet metal
Answer:	No. The on line manual states it can only do 10 gauge aluminum or 0.101 inches.
Question:	Is there a Hard case for storage this tool
Answer:	The one I bought through amazon did not come with a hard case
Question:	Which is better? A shear or a nibbler? What will one do that the other can't? Kind of confused
Answer:	A nibbler can go in smaller circles and do more intricate work. A shear you will have a strip of sheet metal to deal with as you cut. I think the nibbler is better on thinner metal and shear on thicker. Hope this helps.

Product features

Makita JN1601 16 Gauge Nibbler

The Makita JN1601 Nibbler die rotates 360 deg. The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience. The JN1601 has an easy punch and die replacement for less down time.

Control

Lock-on sliding switch for continuous operation

Convenience

Die rotates 360°; large 1/4" stroke

Capacity

Cuts up to 16 gauge mild steel and 18 gauge stainless steel

Power

5 AMP motor delivers 2,200 SPM

Product description

The 18V LXT Lithium-Ion cordless 16 gauge Nibbler (model XNJ01Z, Tool only) provides contractors With another 18V LXT metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.

• Makita-built motor delivers 1, 900 SPM for fast and smooth cutting
• Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
• Die holder rotates 360Degree to meet demands of cutting Direction
• Convenient chip disposal is below cutting material to minimize damage to cutting surface
• Cutting radius: inner edge 1-3/4"; outer edge 2"

User questions & answers

Question:	How is this for cutting straight line? Does it wonder or easy to control
Answer:	They are good but more suited for taller people.
Question:	Does this work same as the makita corded nibbles? 18 Ga mild metal and 16 Ga stainless
Answer:	Hi James, I'm not exactly sure what information you are looking for. These Amazon answer boxes also do not allow for photos to be posted. If you are looking for more information regarding these crutches below is a link that will take you to the Drive Medical website page for them. Link to Crutches: http://www.drivemedical.com/b2b/index.php/universal-aluminum-crutch-with-accessories-487.html
Question:	Does this tool turn easily while cutting to make odd shaped cut outs
Answer:	Definitely. I am under 5' and it can be adjusted even lower.
Question:	Does this product work
Answer:	These crutches adjust to the height of person who are between 4'6" and 6'6"...... per the instructions that comes with this product.

Product features

Makita XNJ01Z 18V LXT Lithium-Ion Cordless 16 Gauge Nibbler, Tool Only

The 18V LXT Lithium-Ion Cordless 16 Gauge Nibbler (model XNJ01Z, tool only) provides contractors with another 18V LXT metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.

The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.

Includes:

Product description

Cutting sheet metals will never be the same with REXBETI ultimate nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.





Features:

Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

Versatile cutting accessories for ROUND and STRAIGHT cutting

Double cutting heads adjust 360 degree for easy cutting in any space

Different cutting shapes available

Best cutting result without any burrs at the cutting edges

No distortion of material

Cuts any shape to 12 mm radius

Extra nibbler die and punch

Safe to touch, easy to work with

Powered by a Hand Drill - no additional power source needed



Maximum cutting capacities:

- iron/steel plate 1.8mm

- stainless steel plate 1.2mm

- copper/aluminium plate 2mm

- plastic/fibreglass board 2mm



Package included:

1 * metal sheet nibbler cutter

1 * Plastic handle

1 * Cutting round accessories

1 * Extra nibbler cutter die

1 * Nibbler cutter punch

1 * Wrench

1 * Iron tool box

1 * User manual



Notice:

To get the best cutting results, please work it on a corded drill with high RPM ( 1500 - 3000 )

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
• REXBETI versatile sheet metal nibbler, perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

User questions & answers

Question:	Need more cutter rods and heads
Answer:	no
Question:	Does this perform better on an impact or drill
Answer:	i ran it on a 20 volt dewalt drill. worked great but i believe itl work hard and wear fast on heavy material regardless of drill or impact. 29 gauge OK but 24 gauge not so much.
Question:	How long does the blade last? Are there replacement parts
Answer:	This is double blade and there is extra blade inside the tool box. so there are 4 blade for you. It will last a very long time for you.
Question:	Has anyone tried on a metal door frame? Might be useful for cutting in door access hardware
Answer:	good cutting on 1.5 mm steel sheet.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch.

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles.

It will be a big time saver for cutting sheet metal.

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
• Easy operation

User questions & answers

Question:	Can I use it to cut perfect circles on sheet metal
Answer:	Yes. it's magic!
Question:	Where can i get the replacement blade
Answer:	A replacement came with the tool. I haven't used it enough to replace the original yet. I don't think you would have any problem getting a replacement from the manufacturer.
Question:	What diametee can you cur with the rod provided
Answer:	If you mean what thickness of the material, that will vary with the type of material but in mild steel I think you can handle about 0.060 inches without any problem. If you mean how small a circle you could cut, well, the cutter rod is only about 1/8" in diameter so minimum might be 1/4" diameter?
Question:	will it cut 1/2 X 1 inch welded wire
Answer:	It will work great if the wire will go in the cutter. I don't know the gauge of the wire you are trying to cit. The cutter will cut 16ga, and thinner.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles. It will be a big time saver for cutting sheet metal

Product description

Dicfeos Double Head Metal Sheet Nibbler Cutter with circle cutting accessories, drill attachment with wrench and parts, maximum 14 gauge steel

• Fitting effortlessly into any standard drill. It can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge
• Sheet metal, corrugated material, pipes, Complex profiles, powder coated material, stainless steel, copper, aluminum, Formica, plastic, fiberglass. It is so versatile and it can handle it all with ease
• Cut in any direction and follow the profile of the material. Gutters, roof sections, Complex shapes or stencils can be cut with precision as it can move anywhere within 360 degrees.
• Straight and Circle cutting, you can also effortlessly cut beautifully
• 2-Year warranty

User questions & answers

Question:	can it be used for wood or other things. Pcv pipe for instance
Answer:	Dear Thank you for the inquiry! The LTMS 021104 can not cut thin wood. However, we have another model that can cut thin wood, the model is LTMS 021108 (LTMS 021108 Double-sided Sheet Metal Nibbler Cutter Drill Attachment Electric Wood Saw Machine Kit with Wrench and Parts Workshop Tool Black 9pcs Set). The LTMS 021108 is out of stock at the moment but It will arrive in the last few days for sale. Please pay attention to our shop Please pay close attention to our store for update and feel free to ask any question! Yours sincerely Friendly Trading
Question:	Will this cut steel oil drums
Answer:	Dear  Thank you for the inquiry! Please inform us what material and how thick is the oil drum. Please see the nibbler cutter's maximum cutting capacities (see below).  Iron/steel plate 1.8mm or 0.07 inch  Stainless steel plate 1.2mm or 0.047 inch  Copper/aluminium plate 2mm or 0.078 inch  Plastic/fibreglass board 2mm or 0.078 inch  Feel free to ask us any question.  Yours sincerely  Friendly Trading
Question:	Can you buy replacement parts for this item
Answer:	Dear Thank you for the inquiry! We will start selling the replacement parts in the listing link ASAP. Please pay close attention to our listing and feel free to ask any question! Friendly Trading
Question:	Will this work on 18 gauge medium/mild steel
Answer:	Yes. 1.8mm is 15 gauge in mild steel. (For those who don't know, smaller the gauge number the thicker the metal.)

Product features

Drill a Starting Hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with Ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch

360 Degree Cutting Head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles. It will be a big time saver for cutting sheet metal

Product description

Cutting sheet metals will never be the same with Dicfeos professional nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips

User questions & answers

Question:	How's it working for you so far? Too few of the reviews, I can't decide
Answer:	I have been using this to make notches in galvanized flashing and it has worked great so far. I played with it on some scrap pieces before making my critical cuts and after a few minutes I was a pro. The edge guide is sort of a gimmick though. I ended up taking it back off and just following my line by hand. For the price these have been great.
Question:	Where do you buy replace blades for double head metal cutter
Answer:	From the dot com site listed on the instructions. It comes wit one double head cutter and main cutter.
Question:	can you use it for auto body work? Will it cut the metal foor skin
Answer:	Ok, first I am going to assume you meant door skin. I have only used it to cut 26 ga. metal, but the description says it will cut up to 14ga. I can tell you that it goes through 26ga. like a hot knife through butter. I have sided a 40 X 50 barn and the original punch is still like new. Most car metal is 18-20ga. so I am going to guess that it will probably work for you. It is an awesome tool for the money. Well constructed and seems like it will last a long time. It came with an extra punch, but I am still on the original. Only problem is it takes both hands to operate so you will need to have someone hold the piece you are cutting or clamp it down somehow. In any case this is a great tool and I would highly recommend it. Now, if you actually did mean foor skin (I think it is spelled foreskin), then dude, even if it is metal it’s gonna hurt like a mother. Be careful. Don’t go too deep.
Question:	What will you do with it
Answer:	I always need to cut some sheet metal. it's compact and always done a good job.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch.

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles.

It will be a big time saver for cutting sheet metal.

Product description

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

• Able to cut up to 18GA material
• 360 degree swivel head for maneuverability
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills
• Able to cut up to 18GA material
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills

User questions & answers

Question:	Does this tool work on Bosch portable drills and impact drivers
Answer:	DWASHRIR works with most 18V-20V impact driver and drill tool brands.
Question:	Will it fit Bostitch
Answer:	Connects via standard 1/4-inch hex shank Compatible with most 18V-20V impact driver and drills
Question:	Can it cut through angle iron, and a garage door track
Answer:	Itsmat the most it will cut is 18 gauge sheet metal
Question:	Will it fit on a makita impact drill
Answer:	Well It just happens that I am using the shears with one of the many Makita impact drivers but it wasn't without a little preparation. The clamping mechanism off the arm has the two pins that insert into retaining holes on the drill body, but mine did not have them so I simply bore a hole on each side in places that the pins could go. It took me about 5 minutes. Now it fits fine and works very well.

Product features

DWASHRIR Impact Ready Shears Attachment

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand.

Product description

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

• Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
• Attack up to 20 gauge stainless steel and 18 gauge sheet metal
• Lightweight design limits fatigue during operation
• Utilizes a powerful 4-amp motor, curling the metal as it cuts
• Swiveling head rotates a full 360 degrees to meet the needs of any project

User questions & answers

Question:	Will it cut the plastic on a truck truck bedliner
Answer:	I found it cuts vinyl soffit with no trouble, neat, efficient and quick. I think they are similar.
Question:	will this cut the alum side panels on enclosed trailer
Answer:	Easily, I've used it on 1/8th thick T6 alum without any issues.
Question:	Does it come with a case
Answer:	Mine did not come with a case.
Question:	How well will this cut 29 gauge galvalume rib steel roof panel? i see the spec for 18 gauge metal
Answer:	I cut 28 gauge steel with it with no problem 29 gauge is thiner yet ( smaller the # thicker the steel ).

Product features

Shear Metal. Sheer Power.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

360-Degree Swivel Head

Pivot the head 360° to help accommodate comfortable cuts from any angle or direction.

Cut up to 18-Gauge Metal

The powerful 4-amp motor slices through 18-gauge sheet metal and 20-gauge stainless steel.

Variable Speed Operation

The pressure-sensitive trigger varies the strokes per minute from 0 to 2500 SPM depending on the pressure applied.

Double Cut Design

The double-cut blade configuration creates a 1/4-inch ribbon of curled metal during operation.

Lightweight Design

The lightweight ergonomic design weighs in at a mere 4.7 pounds, limiting fatigue during operation.

3-Inch Turning Radius

Cut circles with radiuses of 3 inches and up to help take on projects with a lot of turns and curves.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• For professional grade applications
• Works on up to 17-gauge cold rolled steel
• Eat through sheet-metal without deformation of edges
• Cut over an inch a second with unmatched balance

User questions & answers

Question:	How much sir pressure is needed to operate this tool
Answer:	70-90 psi
Question:	It says 2cfm - at what PSI
Answer:	45psi
Question:	Can you get replacement blades/cutters for this tool
Answer:	Yes, we carry replacement cutters and die, part numbers 727-41 and 727-43. (800) 221-9705
Question:	Would this work for flush cutting copper counter tops
Answer:	No. There’s an offset built into the guide

Product description

The Ingersoll Rand edge EC300 air Nibbler lets you get a bigger bite and better angle cuts. The EC300 holds a tight 1/4 inch radius with great accuracy giving control and cutting power without distorted edges. Air consumption at load: 17 CFM; air inlet size: 1/4 in. Npt; minimum hose size: 3/8 in.

• Cuts up to 18 gauge steel, aluminum, plastic or other metals
• 6 ft. Per minute cutting rate
• At 4200 strokes per minute the EC300 holds a tight 1/4 in. Radius
• Angled head for easy cutting
• Features include an ergonomic grip, low profile throttle lever, and front exhaust

User questions & answers

Question:	Got a harbor frieght version nibbler but it fails on 1/16in aluminum diamond plate. Can this tool do it
Answer:	Nope. These shears are primarily for sheet metal. They'll play hell trying to cut felt, and then the felt will look like hell...
Question:	Can anybody recommend an air compressor for use with this nibbler
Answer:	I haven't tried it. But I would think so if it is not real brittle.
Question:	I opened mine out of the and added the input. the air just blows right the exhaust. have it set at 90psi. am i missing something? doesn’t work
Answer:	Nope, you'll gum up the shears, and dull them out post haste.
Question:	What is the diameter of the nibbler head
Answer:	NO. Uses 120 volt only.

Product features

Ingersoll Rand Edge Series EC300 Air Nibbler

Get a bigger bite and better angle cuts! The Edge Series EC300 Air Nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Even at 4,200 strokes/min the EC300 holds a tight 1/4" radius with great accuracy giving you the control and cutting power you need all without the distorted edges!

True Cutting Power

This tool can deliver. The EC300 cuts up to 18 gauge steel, aluminum, plastic or other metals.

It features a 6 ft. per minute cutting rate. Bring the EC300 anywhere, as it will be ready for the tough jobs.

Elite Accuracy and Control

With its compact design and precision cutting, the Ingersoll Rand EC300 will get the job done right each time. The operator can expect a true cut, no matter the type of task at-hand.

Edge Series Output

Edge Series tools are designed specifically for the personal user or light professional applications. Each tool is durable, powerful and features an ergonomic grip to ease hand fatigue, as well as a convenient exhaust to blow air away from the project. The Edge Series family of tools contains 25 different models for some of the most common consumer uses: bolting, cutting, painting and finishing.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor.

- 4.0 Amp Motor

-360° Swivel Head for cutting curves in sheet metal

-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge

-Three blades work to reduce metal deformation

-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel

Genesis' two year warranty means you buy with confidence. Cord Length- 72 inches.

• Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
• Powerful 4.0 amp motor
• 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
• Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
• Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!

User questions & answers

Question:	i need to cut felt padding for carpets. Will this do the job without fraying the cloth
Answer:	No, capacity for mild steel is 14 GA.
Question:	Will tjis cut plastic
Answer:	DCS494M2 includes (2) 4 Amp hour batteries and (1) charger.
Question:	Will it cut dimensional asphalt roof shingles
Answer:	Dewalt makes an adapter (Dewalt DCA1820) that allows you to plug their newer 20V batteries into the older style 18V tools; (but you will need the adapter and a 20V battery starter kit (like Dewalt DCB205-2CK) so you can charge the batteries) by James Perdue HVAC contractor
Question:	Does this machine use 220V? Thanks
Answer:	"I think if you would cut with a 1/2" grinder all the way around, then use this tool to trim off the burrs, you would have a nice cut. I use this to make cuts for metal roof installations. I've not used it in steel duct. It is an excellent tool." (I am quoting my construction contractor husband.)

Product features

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear

Features:

• Quickly Cuts Metal Roofing, Flashing, and other Sheet Metal up to 14 Gauge
• Powerful 4.0 Amp Motor
• 360° Swiveling Head for Cutting Control and Convenience
• Variable Speed (0-2500) SPM for Versatility in Cutting a Variety of Materials
• Three-Blade Cutting System Reduces Metal Deformation
• Cutting Radius of 5-1/2″ and Larger
• Lock-On Switch for Extended Use
• Built-in Belt Clip
• Includes: Hex-Key for Easy Blade Replacement

Product description

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 - 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB

• Attaches to a drill or impact driver you already own
• Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns
• 360 degree rotating head for optimum tool clearance and material flow
• Able to cut curves and straight lines
• Made in the USA

User questions & answers

Question:	I have to make valley cuts on Pro Rib roof sheeting. Which of these two is best; the TSCM or the TSHD? Many thanks
Answer:	The TSHD shear is enough, but I would buy the TSCM; it cuts thicker metal, it's a better unit.
Question:	Can this unit cut standard corrugated roofing as well as asphalt shingles
Answer:	Never cut asphalt shingles but this thing will cut metal roofing. Just a couple of tricks I learned, run drill about 1/2 speed and hold at 70 degree angle. Let the tool do the cutting, don't try to rush. Hope this helps. Practice a little and you will be satisfied. "Rooster"
Question:	need cutting shear for the 5-rib metal with a 1" in height, metal
Answer:	Show a pic of your description. I do know that the shears work great on corrugated metal
Question:	What drill do you use with this? What would you recommend
Answer:	I have used an 18 volt dewalt, and a corded milwaulkee drill. Don't know if a smaller than 18 volt would do very good.

Product description

Main Features:

Light and compact: Fits in nicely in the corner of your toolbox

Cutting Heads adjust 360° for easy cutting in any space

No distortion of material

Cuts corrugated, round, or flat materials up to 14 Gauge (2 mm thick) (varies by material)

Cuts any shape to 12 mm radius

Ergonomic design handle for comfort.

Compact size, easy to operate and labor-saving.

Unique convenience and durability.

Excellent cutting speed by 6 feet(2 m) per minute with 3000 RPM.

Best cutting result without any burrs at the cutting edges.

360 changeable direction at operation.

To be fitted with any electic drill or power drill with 3000RPM.

Different cutting shapes available.



Specification/Capacity:

Cutting Radius: 12mm / 0.47 inches

Hex Shaft(for Drill): 7mm

Maximum Cutting Thickness:

Iron Sheet: 1.8mm max

Stainless Steel Sheet: 1.2mm max

Copper, Aluminum Sheet: 2.0mm max

Plastic/Fiberboard: 2.0mm max

Speed: 2 metre per minute with 3000 rpm (1500-3000)



Package included:

1 x metal sheet nibbler cutter

1 x Plastic handle

1 x Extra nibbler cutter die

1 x Nibbler cutter punch

1 x Wrench

1 x Iron tool box

1 x User manual

• PERFECT TOOL FOR ANY CUTTING TASK: This multi-purpose nibbler cutter is suitable for cutting of various materials such as sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminum, formica, plastic, fiberglass etc. Suitable for car repairing and maintenance, metal sheet, gutters, roof sections, complex shapes or stencils.
• EASY USE AND CONTROL: Easily fit into any standard drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips. Compact size, easy to operate and labor-saving. Easy and fast to cut 14 gauge material and creates a precision, burr free edge, 360 degree double cutting head to cut straight line, curve line, circles, or many other irregular lines and shapes.
• DOUBLE HEADED: Creative design with double heads, which is more powerful and durable than single head nibbler. Ergonomic design ultra-grip handle offers comfort, superior control, maneuverability and increased safety.
• MAXIMUM CUTTING CAPACITIES: Steel plate 15 gauge, stainless steel 18 gauge, copper/aluminium plate 14 gauge, plastic/fibre board 14 gauge.
• GUARANTEE: 100% Satisfaction Guarantee, 30 days return, refund policy without hassle, 1 year FREE exchange for a risk-free purchase.

User questions & answers

Question:	If I want to start inside a sheet, what size hole do I have to drill to drop the tool in
Answer:	My son is 5'10" and the adult crutches were adequate for him. I am 6'2" and have been more comfortable with the adult tall.

Product description

Turbo Shear, Steel Capacity (Gauge) 18, Features Installs in Chuck of Drill, Capable of Cutting Layered Seams of Spiral Duct and Angled Profiles of Building Panels and Metal Shingles, Steel w/Aluminum Drill Clamp, Left/Straight Cutting Action, Tight Pattern and Right Angle Curve Type

• Made in the USA
• Replaceable blades
• Turns your power drill into a heavy duty power shear
• Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill
• Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct
• Navigates tight patterns and square cuts
• Clamping devise is included

User questions & answers

Question:	Can I use to cut 2mm aluminum Tread plates
Answer:	std size or tall if you cut them down !
Question:	Will this cut round duct easily
Answer:	As best I recall, no they do not. They do, however, seem to slough off little bit of rubber after much use so it is worth your theme to shake them a bit after easy use to ensure you are getting thr correct grip on things.
Question:	Will this cut gutters in half? I install gutters . I often have to old dispose gutters and have to cut them to fit in my 6ft truck bed. Thanks
Answer:	The handles are adjustable. As far as length I was second to last on the adjustable length. I am 6'7". They fit me comfortably. The weight transfer your body weight to your hands. So no armpit discomfort.
Question:	will this product cut corrugated tin sheets
Answer:	Contact Amazon to facilitate the return.