14 best diy sheet metal shear

Product description

Eastwood's Heavy-Duty Air Shears makes clean cuts in metal up to 18-gauge Our air shears is built to match the quality and features of national brands, so it's built for everyday use in auto body shops, sheet metal shops, machine shops...and your shop. 4,500 strokes per minute to aggressively cut through most metals and plastics Slices through up to 18-gauge metal, without chips Cutting head rotates for precise contoured cuts Needs just 4 cfm at 90 psi, so you can use a DIY compressor

• Eastwood'S Heavy-Duty Air Shears Makes Clean Cuts In Metal Up To 18-Gauge.
• 4,500 Strokes Per Minute To Aggressively Cut Through Most Metals And Plastics
• Slices Through Up To 18-Gauge Metal, Without Chips
• Cutting Head Rotates For Precise Contoured Cuts
• Needs Just 4 Cfm At 90 Psi, So You Can Use A Diy Compressor

Product description

★【Fast Shipping】-- Shipping from US warehouse, about 4-8 business days to delivery.

Specification:

Cutting thickness : 2.5mm

Soft steel plate: 2mm / stainless steel: 1.5mm

No-load speed: 2000r/min

Rated voltage : 220V

Rated frequency : 50/60Hz

Rated power : 500W

Packing size: 35*7*16.5cm

Package weight: 2.6kg

Description:

Full copper core motor, smooth air inlet and exhaust system, good cooling performance, greatly improve the durability of the motor. The swing of the blade is smaller than that of the conventional scissors, which greatly improves the precision of your work!

500W power dust-proof motor for maximum performance in harsh environments. Special bearings are used to perfectly match high-power motors.

The product is a double-insulated hand-held power tool that uses a single-phase motor as the power to drive the working head through the transmission mechanism. It has the characteristics of convenient cutting of various shapes of steel plates, light weight, safety and reliability, and is widely used in automobiles and shipbuilding. And all kinds of repairing and other departments in the case of sheet metal, cutting thin plates, metal plates and other plates

Safety Precautions:

1. Do not use in rain, excessive humidity, or flammable liquids and gases.

2. Keep the power cord away from heat, oil and sharp objects. When the power cord is damaged, replace it in time. Do not touch the exposed conductor to prevent electric shock.

3. When the tool is not in use, it should be placed in a place that is dry and out of reach of children.

4. Do not exceed the working ability of the tool to use, do not use low-power tools to do heavy work to avoid damage.

5. Wear overalls and protective glasses when working.

6. Unplug the power cord when the tool is not in use to prevent accidental start-up.

The package includes:

1x electric iron scissors

• ★500W power dust-proof motor for maximum performance in harsh environments. Special bearings are used to perfectly match high-power motors.
• ★Full copper core motor, smooth air inlet and exhaust system, good cooling performance, greatly improve the durability of the motor. The swing of the blade is smaller than that of the conventional scissors, which greatly improves the precision of your work!
• ★The product is a double-insulated hand-held power tool that uses a single-phase motor as the power to drive the working head through the transmission mechanism. It has the characteristics of convenient cutting of various shapes of steel plates, light weight, safety and reliability.
• ★It is widely used in automobiles and shipbuilding. And all kinds of repairing and other departments in the case of sheet metal, cutting thin plates, metal plates and other plates.
• ★【Money Back Guarantee】: SHZICMY would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. We will try our best to help you solve it.100% customer satisfaction guarantee is our goal.

Product description

CaNibble is the only nibbler on the U.S Market with a patented cutting action. It attaches to any standard drill (keyed or keyless chuck, corded or cordless) transforming it into a safe, easy to use, sheet metal cutting tool. It is highly portable, bring it with you on a cordless drill. CaNibble’s Nibbler offers the tightest radius of cut available on the market and can cut complex profiles easily without disengaging the work piece There is NO distortion of material shape and NO burrs or sharp edges - this tool is SAFE. FAQ’s How thick is the material CaNibble can cut? The answer depends on the grade, and type of material being used. For Mild Steel it is 1.6mm (or 16 SWG) 0.063” For Brass, Aluminium, Plastic it is 2.0mm (or 14 SWG) 0.079” We recommend a specific punch and die are kept for Aluminium work For Stainless Steel it is 1.0mm Maximum (or 20 SWG) 0.039” We recommend a specific punch and die are kept for Stainless Steel work. Always apply a lubricant such as WD40 or light oil along the path of cut. What sort of Drill will I need to run my CaNibble? Any Power drill, electric or air with a 9mm chuck capacity and a speed range of 1,500 to 2,500 RPM. 1500 RPM is the recommended cutting speed for Stainless Steel 2500 RPM is recommended for Mild Steel, Aluminium and Plastic. Your CaNibble is ready for action, and will cut both corrugated and flat sheet metals. It will also cut plastics, Formica, chicken wire, even paper and cardboard, plus rounded and tubular sections of material. It will cut in straight lines, and in curves with a radius as small as 8mm (5/16”) without distortion or leaving sharp jagged edges. Its index-able die will adjust through 360 degrees quickly for different applications and access. What Guarantee does CaNibble offer? 5 years, excluding consumables – these are the replaceable punches and dies. See it at https://www.youtube.com/watch?v=0LLBTyWFdkk PLEASE NOTE THE STRAIGHT AND CIRCLE ATT. WORKS BEST IN CONJUNCTION WITH OUR BENCH CLAMPS

• The Original Metal Cutter . Australian Made. The perfect tool for cutting almost any type of sheet material. From metal, plastics, Formica, chicken wire, paper, cardboard, and even rounded and tubular sections of material. Cut a straight line or create a perfect circle with this Nibbler
• Patented Cutting Action . The patented cutting action makes this the most manoeuvrable sheet metal cutting tool on the market and is great for every job. Cuts up to 1200ft on one punch
• Attach to any Standard Drill. The Professional Nibbler works with any Power drill, electric, battery or air with a 9mm chuck capacity and a speed range of 1,500 to 3,000 RPM. 1500 RPM is the recommended cutting speed for Stainless Steel. 2500 RPM is recommended for Mild Steel, Aluminium and Plastic
• Quick, Safe and Easy to Use - Put down the tin snips and shears and experience the ease, speed, and manoeuvrability of CaNibble Professional Nibbler. There is NO distortion of material shape and NO burrs or sharp edges. There is no need for filing afterward saving you time and effort.
• Cut Perfect Circle in Metal - 2" to 11 3/4" diameter & cut straight line's. Line the guide up on an existing straight edge, set the distance and cut. Great for adding vents and flues to roofs, homes, caravans, boats and sheds. Please note, this attachement works best in conjunction with bench mounting clamps.

User questions & answers

Question:	Will this tool cut 16 gauge stainless steel
Answer:	Great question, CaNibble will cut 16 gauge materials like brass, aluminium & plastics but not Stainless Steel. However it will cut 20 gauge stainless steel (1 mm thick) which is the maximum recommended gauge for this material.
Question:	Where is this product made
Answer:	This is made in QLD, Australia :-)

Product description

Cutting sheet metals will never be the same with REXBETI ultimate nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.





Features:

Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

Versatile cutting accessories for ROUND and STRAIGHT cutting

Double cutting heads adjust 360 degree for easy cutting in any space

Different cutting shapes available

Best cutting result without any burrs at the cutting edges

No distortion of material

Cuts any shape to 12 mm radius

Extra nibbler die and punch

Safe to touch, easy to work with

Powered by a Hand Drill - no additional power source needed



Maximum cutting capacities:

- iron/steel plate 1.8mm

- stainless steel plate 1.2mm

- copper/aluminium plate 2mm

- plastic/fibreglass board 2mm



Package included:

1 * metal sheet nibbler cutter

1 * Plastic handle

1 * Cutting round accessories

1 * Extra nibbler cutter die

1 * Nibbler cutter punch

1 * Wrench

1 * Iron tool box

1 * User manual



Notice:

To get the best cutting results, please work it on a corded drill with high RPM ( 1500 - 3000 )

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
• REXBETI versatile sheet metal nibbler, perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

User questions & answers

Question:	Need more cutter rods and heads
Answer:	no
Question:	Does this perform better on an impact or drill
Answer:	i ran it on a 20 volt dewalt drill. worked great but i believe itl work hard and wear fast on heavy material regardless of drill or impact. 29 gauge OK but 24 gauge not so much.
Question:	How long does the blade last? Are there replacement parts
Answer:	This is double blade and there is extra blade inside the tool box. so there are 4 blade for you. It will last a very long time for you.
Question:	Has anyone tried on a metal door frame? Might be useful for cutting in door access hardware
Answer:	good cutting on 1.5 mm steel sheet.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch.

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles.

It will be a big time saver for cutting sheet metal.

Product description

Cutting sheet metals will never be the same with Dicfeos professional nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips

User questions & answers

Question:	How's it working for you so far? Too few of the reviews, I can't decide
Answer:	I have been using this to make notches in galvanized flashing and it has worked great so far. I played with it on some scrap pieces before making my critical cuts and after a few minutes I was a pro. The edge guide is sort of a gimmick though. I ended up taking it back off and just following my line by hand. For the price these have been great.
Question:	Where do you buy replace blades for double head metal cutter
Answer:	From the dot com site listed on the instructions. It comes wit one double head cutter and main cutter.
Question:	can you use it for auto body work? Will it cut the metal foor skin
Answer:	Ok, first I am going to assume you meant door skin. I have only used it to cut 26 ga. metal, but the description says it will cut up to 14ga. I can tell you that it goes through 26ga. like a hot knife through butter. I have sided a 40 X 50 barn and the original punch is still like new. Most car metal is 18-20ga. so I am going to guess that it will probably work for you. It is an awesome tool for the money. Well constructed and seems like it will last a long time. It came with an extra punch, but I am still on the original. Only problem is it takes both hands to operate so you will need to have someone hold the piece you are cutting or clamp it down somehow. In any case this is a great tool and I would highly recommend it. Now, if you actually did mean foor skin (I think it is spelled foreskin), then dude, even if it is metal it’s gonna hurt like a mother. Be careful. Don’t go too deep.
Question:	What will you do with it
Answer:	I always need to cut some sheet metal. it's compact and always done a good job.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch.

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles.

It will be a big time saver for cutting sheet metal.

Product description

the tin snip are designed with chrome vanadium steel, special quenching treatment, serrated edge non-slip.

the snips Cut iron like cut mud

 

Product name: 3 pieces of aviation snips set, Aviation Tin Snips Set,Tin Cutting Shears Power Cutter,Metal Aviation Tin Snip Cutter

product material:Use CRV chrome vanadium steel material to ensure product quality and grade,Thickened cutter head is more durable

Features: safety lock,spring,Sharp, easy and labor-saving, non-slip, wear-resistant,Not easy to rust

Reference use: cold rolled steel plate, stainless steel plate, plastic sheet, aluminum sheet, Copper, Aluminum, Metal Wire, Plastic, Fishing Nets, DIY handmade etc

 

Package included:

1Pcs x Straight Cutters

1Pcs x Left Cutters

1Pcs x Right Cutters

• 3 Piece Set - Left, Right and Center Cut Snips offset models,You can use any hand to cut from any angle.
• Durable Blade - The blade is forged from chrome vanadium steel and has been specially quenched Cut iron like paper cut,with serrations Prevent slippage.
• Double Leverage& Ergonomic Design - Compound leverage multiplies handle force to cutting blades by 8: 1 for significantly less fatigue.The handle is made of PVC material for a comfortable grip Professional and labor-saving design, can work for a long time without fatigue.
• Security Lock - All-metal switch locks improve safety and prevent accidental injury.
• Multiple Usage - Shearable thickness: stainless steel 0.7mm/cold rolled plate 1.2mm.Can cut aluminum gusset/cut iron sheet/cut stainless steel/cut keel/cut steel wire.

User questions & answers

Question:	are these Aviation Snip good quality and durable
Answer:	They are the best snips I’ve ever bought and are long lasting. And I wasted some money on others. So price and quality hard to beat in my opinion.
Question:	Are these aviation scissors durable
Answer:	Fantastic snips. Very well made, precise. Excellent cutting performance. Seem very durable - but they are still new.
Question:	Does the metal cutter have spring
Answer:	Yes.This tin snips have a spring handle so it opens automatically after each cut .
Question:	Can these metal shears cut straight and curved incisions
Answer:	yes it will cut , these sheet metal cutter is easily use.

Product description

★ Ideal for cutting hard material: aluminum, sheet metal, leather, floor covering, card board and plastic.

★ Ergonomic designed PVC handle, comfortable grip

★ Anti-rust CRV steel, hard and endurable

★ Heat-treated blade, sharp and hard

★ Safety lock between the handles



Features:

Adopt stainless steel cutter head, strong shearing, anti-rust, and endurable.

Safety Lock - easy open/close lock for convenient security system.

Serrated cutting edges prevent materials from slipping during use.

Ergonomic designed PVC handle, comfortable grip.

Compound leverage multiplies handle force to cutting blades by 8:1 for significantly less fatigue.

Ideal snips for cutting aluminum, vinyl siding, screening, cardboard, leather and copper.



Specifications:

Brand: Finder

Material: Carbon steel

Type: Straight head

Color: Orange and Black

Total length: 255mm

The length of blade edge: 47mm

Head width: 46mm

Handle length: 108mm

Weight: 364g



Package included:

1 x Aviation Tin Snip

• LONGEST LASTING CUTTING EDGE: The blades are hot drop-forged of premium CRV steel and austemper heat-treated for maximum strength and durability. The aviavtion tin snips adopt vibration grinding head covering anti-rust oil, which is rustproof and more endurable.
• STRAIGHT REGULAR CUT: The extra long straight-cut aviation snip is used to cut straight and wide curves to the left and right, and can be used in either hand. The straight blades that allow the hand to be kept safe above the cutting work below.
• ERGONOMIC DESIGN: The ergonomic designed TPR handle with comfortable soft grip, which conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage. The tail of aviation shear is with suspension hole design, which is easy to carry and store.
• SAFE & HIGH EFFICIENCY: The metal safety lock is between the strong handles. It' s easy to open and close for convenient security system. High tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power. Serrated cutting edges prevent materials from slipping during use. It' s safe and easy to do metal working!
• WIDE APPLICATION: Finder aviation snips are ideal for use on sheet materials, beading, cans, tins and fixings, and specially designed to cut hard materials, aluminium, sheet metal, plastic plates, vinyl siding, cardboard, wire mesh, copper, leather, tiles, rubber and shingles.

User questions & answers

Question:	Tool is 10” but what is the actual cut length of the blades
Answer:	Cut length is 1.77 inches. Note the overall length of the tool is important for leverage when cutting thick material.
Question:	Will this cut through thick plastic, like a plastic garbage container
Answer:	Yes, of course, he can also cut something very thick and hard.
Question:	What is the maximum gauge for stainless steel and aluminum
Answer:	2mm for stainless steel, and 1.5mm for aluminum.
Question:	In your opinion, can an average woman's hand and strength use this tool without problem
Answer:	Woman' s hand can use it. I am a woman too, I also use it.

Product description

This Makita nibbler features a 360-degree rotating die, large 1/4in. stroke, sliding switch for continuous use, built-in thickness gauge and easy punch and die replacement. Includes wrench and hex wrench. Cordless: No, Cutting Capacity Mild Steel (gauge): 16, Cutting Capacity Stainless Steel (gauge): 18, Cutting Depth (in.): 1/4, Volts: 115, Inside Cutting Radius (in.): 1 3/4, Strokes Per Minute (SPM): 2,200, Cutting Capacity Aluminum (gauge): 10, Amps: 5, Outside Cutting Radius (in.): 2. Cord Length- 6.4 feet.

• Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
• Die rotates 360°
• Large 1/4"" stroke
• Ergonomic, slim body design for easy gripping
• Extremely light (weighs only 3.6 lbs.) for easy handling.Overall Length : 10.25 inches
• Lock-on sliding switch for continuous operation
• Built-in thickness gauge for convenience

User questions & answers

Question:	has anyone ever cut 16 ga. steel with this? 18 ga
Answer:	I have cut 18ga. Very easy cuts. I feel it would handle 16 gage.
Question:	Can this nibbler cut 1/8 aluminium sheet metal
Answer:	No. The on line manual states it can only do 10 gauge aluminum or 0.101 inches.
Question:	Is there a Hard case for storage this tool
Answer:	The one I bought through amazon did not come with a hard case
Question:	Which is better? A shear or a nibbler? What will one do that the other can't? Kind of confused
Answer:	A nibbler can go in smaller circles and do more intricate work. A shear you will have a strip of sheet metal to deal with as you cut. I think the nibbler is better on thinner metal and shear on thicker. Hope this helps.

Product features

Makita JN1601 16 Gauge Nibbler

The Makita JN1601 Nibbler die rotates 360 deg. The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience. The JN1601 has an easy punch and die replacement for less down time.

Control

Lock-on sliding switch for continuous operation

Convenience

Die rotates 360°; large 1/4" stroke

Capacity

Cuts up to 16 gauge mild steel and 18 gauge stainless steel

Power

5 AMP motor delivers 2,200 SPM

Product description

Finder 12" Straight Cut Aviation Snips, Made of Premium Quality Materials, Advanced Technology and Superb Craftsmanship. We Specially Produce Professional Tools & DIY Supplies with Industrial Quality. Choose Finder, Choose the Best!



Features:

300mm aviation tin snip is specially designed to cut hard materials, aluminium, sheet metal, plastic plates, wire mesh, copper, leather and etc.

Suitable for cutting straight and wide curving to the left and right, and can be easily used in either hand.

Manufactured from drop forged carbon steel and heat treated for increased durability.

Ergonomic grips with slip guards to protect knuckles & fingers.

Safety Lock - All metal closed switch lock, to prevent accidental injury, improve safety.

Serrated cutting edges prevent materials from slipping during use.

Compound leverage for maximum cutting power for significantly less fatigue.



Specifications:

Brand: Finder

Material: Chrome vanadium steel

Special Type: Straight cutter aviation snip

Common Type: Multi-purpose Scissors

Color: Orange and Black

Handle Material: Rubber

DIY Supplies: Metalworking and shearing

size: 300mm / 12 inch, 285*60mm



Package included:

1 x Straight Cut Aviation Tin Snip

• STRAIGHT REGULAR CUT: The extra long straight-cut aviation snip is used to cut straight and wide curves to the left and right, and can be used in either hand. The straight blades that allow the hand to be kept safe above the cutting work below.
• LONGEST LASTING CUTTING EDGE: The blades are hot drop-forged of premium CRV steel and austemper heat-treated for maximum strength and durability. The aviavtion tin snips adopt vibration grinding head covering anti-rust oil, which is rustproof and more endurable.
• ERGONOMIC DESIGN: The ergonomic designed TPR handle with comfortable soft grip, which conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage. The tail of aviation shear is with suspension hole design, which is easy to carry and store.
• SAFE & HIGH EFFICIENCY: The metal safety lock is between the strong handles. It' s easy to open and close for convenient security system. High tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power. Serrated cutting edges prevent materials from slipping during use. It' s safe and easy to do metal working!
• WIDE APPLICATION: Finder aviation snips are ideal for use on sheet materials, beading, cans, tins and fixings, and specially designed to cut hard materials, aluminium, sheet metal, plastic plates, vinyl siding, cardboard, wire mesh, copper, leather, tiles, rubber and shingles.

Product features

Package included

• 1 x Straight Cut Aviation Tin Snip

Specifications

• Material: Chrome vanadium steel
• size: 300mm / 12 inch, 285*60mm
• Special Type: Straight cutter aviation snip (Common Type: Multi-purpose Scissors)
• DIY Supplies: Metalworking and shearing

LONGEST LASTING CUTTING EDGE

• The blades are hot drop-forged of premium CRV steel and austemper heat-treated for maximum strength and durability.
• Adopt vibration grinding head covering anti-rust oil, rustproof and more endurable.
• Labor-saving

HIGH EFFICIENCY

• Double lever.
• Serrated cutting edges prevent materials from slipping during use.
• High efficiency.

SAFE & HIGH EFFICIENCY

• The metal safety lock is between the strong handles. Easy to open and close for convenient security system.
• Provides efficient conversion of hand force to cutting power.
• Safe and easy to do metal working!

ERGONOMIC DESIGN

• Ergonomic designed TPR handle with comfortable soft grip.
• With suspension hole design, easy to carry and store.

Product description

Feature:

The 360 degree cutting head allows easy control and has no problem to cut straight curves and circles.

Perfect for car repair and house maintenance like metal roof cutting, vent pipe.

• 14 Gauge Material Cutter - With this double headed sheet metal nibbler you will enjoy the cutting as the faster and safer than before. It fits with any standard drill. The Metal Cutter can cut 14 gauge material and creates a precision, without burr edge
• 360 Degree Cutting Head - Adjust to any cutting angle and any shape. You can cut the material such as gutters, roof sections, and other complex shapes. With the 360 Degree Cutting Head, it becomes the multifunction tool.
• Wide Usage - it can handle amount of material with ease. This versatile sheet metal nibbler can cut the material such as stainless steel, Sheet metal, corrugated material, pipes, powder coated material, aluminum alloy, plastic, and etc.
• Fits 1500-3000 RPM Drill - This cutter compatible with 1500-3000 RPM Drill. It does not leave any burs or distortion on your cutting edges.
• 100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!

Product description

Sheet Metal Nibbler Cutter, HILDA 5pcs Set Double Head Cutter Sheet Metal Nibbler Cutter Power Drill Attachment, with Metal Storage Box



Cutting sheet metals will never be the same with Hilda double head sheet nibbler metal cutter. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.



Features:

Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

Double cutting heads adjust 360 degree for easy cutting in any space

Different cutting shapes available

Best cutting result without any burrs at the cutting edges

No distortion of material

Cuts any shape to 12 mm radius

Extra nibbler die and punch

Safe to touch, easy to work with

Powered by a Hand Drill - no additional power source needed



Maximum cutting capacities:

- iron/steel plate 1.8mm

- stainless steel plate 1.2mm

- copper/aluminium plate 2mm

- plastic/fibreglass board 2mm



Package included:

1 * HILDA metal sheet nibbler cutter

1 * Plastic handle

1 * Extra nibbler cutter die

1 * Nibbler cutter punch

1 * Wrench

1 * Iron tool box

1 * User manual

• The sheet metal nibbler cutter is suitable for car repairing/maintenance and metal sheet productions
• Dual head metal sheet nibbler cutter is to be used with an electric drill or air drill
• Double cutting head and 360 degree adjustable with cutting speed of 1500 - 3000rpm
• Maximum cutting capacities: iron/steel plate 1.8mm, stainless steel plate 1.2mm, copper/aluminium plate 2mm, plastic/fibreglass board 2mm
• Package include: 1 x nibbler cutter, 1 x hex wrench, 1 x plastic handle, 1 x extra cutter holder, 1 x extra cutter stick, 1 x user manal, 1 x storage box

User questions & answers

Question:	Could this be used on leather
Answer:	I think yes. But the main purpose of this tool is cutting sheet metals
Question:	can it cutting curves for me? Or just can cut straight lines like a shear
Answer:	Definitively cut curves.... that the whole idea.....
Question:	Will this cut steel oil drums
Answer:	This tool is really made for thinner material ，if the oil drums is not too large ,you can try it .thanks for your question !

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
• Easy operation

User questions & answers

Question:	Can I use it to cut perfect circles on sheet metal
Answer:	Yes. it's magic!
Question:	Where can i get the replacement blade
Answer:	A replacement came with the tool. I haven't used it enough to replace the original yet. I don't think you would have any problem getting a replacement from the manufacturer.
Question:	What diametee can you cur with the rod provided
Answer:	If you mean what thickness of the material, that will vary with the type of material but in mild steel I think you can handle about 0.060 inches without any problem. If you mean how small a circle you could cut, well, the cutter rod is only about 1/8" in diameter so minimum might be 1/4" diameter?
Question:	will it cut 1/2 X 1 inch welded wire
Answer:	It will work great if the wire will go in the cutter. I don't know the gauge of the wire you are trying to cit. The cutter will cut 16ga, and thinner.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles. It will be a big time saver for cutting sheet metal

Product description

Dicfeos Double Head Metal Sheet Nibbler Cutter with circle cutting accessories, drill attachment with wrench and parts, maximum 14 gauge steel

• Fitting effortlessly into any standard drill. It can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge
• Sheet metal, corrugated material, pipes, Complex profiles, powder coated material, stainless steel, copper, aluminum, Formica, plastic, fiberglass. It is so versatile and it can handle it all with ease
• Cut in any direction and follow the profile of the material. Gutters, roof sections, Complex shapes or stencils can be cut with precision as it can move anywhere within 360 degrees.
• Straight and Circle cutting, you can also effortlessly cut beautifully
• 2-Year warranty

User questions & answers

Question:	can it be used for wood or other things. Pcv pipe for instance
Answer:	Dear Thank you for the inquiry! The LTMS 021104 can not cut thin wood. However, we have another model that can cut thin wood, the model is LTMS 021108 (LTMS 021108 Double-sided Sheet Metal Nibbler Cutter Drill Attachment Electric Wood Saw Machine Kit with Wrench and Parts Workshop Tool Black 9pcs Set). The LTMS 021108 is out of stock at the moment but It will arrive in the last few days for sale. Please pay attention to our shop Please pay close attention to our store for update and feel free to ask any question! Yours sincerely Friendly Trading
Question:	Will this cut steel oil drums
Answer:	Dear  Thank you for the inquiry! Please inform us what material and how thick is the oil drum. Please see the nibbler cutter's maximum cutting capacities (see below).  Iron/steel plate 1.8mm or 0.07 inch  Stainless steel plate 1.2mm or 0.047 inch  Copper/aluminium plate 2mm or 0.078 inch  Plastic/fibreglass board 2mm or 0.078 inch  Feel free to ask us any question.  Yours sincerely  Friendly Trading
Question:	Can you buy replacement parts for this item
Answer:	Dear Thank you for the inquiry! We will start selling the replacement parts in the listing link ASAP. Please pay close attention to our listing and feel free to ask any question! Friendly Trading
Question:	Will this work on 18 gauge medium/mild steel
Answer:	Yes. 1.8mm is 15 gauge in mild steel. (For those who don't know, smaller the gauge number the thicker the metal.)

Product features

Drill a Starting Hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with Ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch

360 Degree Cutting Head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles. It will be a big time saver for cutting sheet metal

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• For professional grade applications
• Works on up to 17-gauge cold rolled steel
• Eat through sheet-metal without deformation of edges
• Cut over an inch a second with unmatched balance

User questions & answers

Question:	How much sir pressure is needed to operate this tool
Answer:	70-90 psi
Question:	It says 2cfm - at what PSI
Answer:	45psi
Question:	Can you get replacement blades/cutters for this tool
Answer:	Yes, we carry replacement cutters and die, part numbers 727-41 and 727-43. (800) 221-9705
Question:	Would this work for flush cutting copper counter tops
Answer:	No. There’s an offset built into the guide