13 best worx drills

Product description

The ultimate everyday drill. This 20V drill driver From WORX Cranks out 265 in-lbs of torque with 15 different clutch positions. That means you’ll find the perfect setting for whatever unique combination of screw, bit, and project material you’re using. The rubber grip gives you more control over all that power, and at less than 3 lbs, you’ll be able to maneuver your drill easier, and for longer, before you get tired. The 3/8” keyless chuck changes out bits quickly. And the 2-Speed Gearbox and control trigger lets you go from 0-1450 RPM, depending on the needs of the job. The maximum drilling capacity is 1” for wood, and 3/8” for steel. There’s an LED light so you can see what you’re doing in dark spaces. It’s the perfect compact, powerful drill for all your big and little projects around the house or workshop. This version is a bare tool only. PowerShare 20V Battery and Charger sold separately.

• [265 in-lbs of torque] with a 15 position clutch to find just the right way to use all that power, depending on the job.
• [Comfort & control] the rubber handle absorbs vibration while adding grip. And at less than 3 lbs in total tool weight, you can drill for a long time without fatigue.
• [3/8” keyless chuck] for quick bit changes. 3/8” is the perfect size to handle the most common drilling jobs.
• [2-Speeds Plus reverse] the variable speed control trigger lets you go slow (0-400 RPM) or really wind It up at 1450 RPM.
• [Led light] see what you’re drilling when you get into a dim corner or poorly lit room. And the low battery indicator lets you know when you’ll need to switch it out.
• [Same battery, expandable power] Tool Only, battery and charger sold separately; Share batteries across all your 20V WORX PowerShare tools so you never run out of power

User questions & answers

Question:	Can it drill through brick
Answer:	It depends on what kind of a bit you use.
Question:	Can I use my drill bits I already have
Answer:	This Drill/Driver has 3/8" chuck size. So as long as the bits are 3/8", it will fit.
Question:	Does this come with a case
Answer:	Hubs does not use any cases for his drills when and if they are supplied. He has built himself a rack that holds all his drills upside down, all in a row, easy access. Can't recall if this particular one came with a case. . looked up the ad and none was mentioned.
Question:	How much power does it have
Answer:	This tool has the same power of a normal battery operated Drill. It contains a 2-Speeds Plus reverse; the variable speed control trigger lets you go slow (0-400 RPM) or really wind It up at 1450 RPM.

Product features

3/8” Keyless Chuck

265 in lbs of Tourque with a 15 Position Clutch

LED Light

2 Speeds Plus Reverse

Rubber Handle Absorbs Vibration

3 Lbs in Weight

Product description

The SD Driver with Screw Holder is for professionals or DIY-ers that have a lot of work to get done. Using a manual screwdriver can strain your hands pretty quickly, and everyone drops fasteners and bits on the ground. Eliminate those two problems with this semi-automatic driver and bit changer—with a screw holder built right in. You just press the orange button on the tip to get the jaws to accept the screw. Then with just one hand, you can maneuver into tight spaces and drill it home. The jaws work when you need to back screws out, too. Your six favorite bits are stored onboard, and you cycle between them by shifting the top piece back towards you. With 0-230 revs/min of no-load speed, you’ll have enough torque to handle the most common screwdriver applications. And the LED headlamp lets you see what you’re doing, even in the dark. The internal 4V battery will hold a charge for up to 18 months, so you can toss the SD Driver on a shelf and it’ll be ready to go the next time you pick it up. A charger comes with it, as does the reloadable bit cartridge, which is stocked with 6 of the most common bits already. Save your hands and stop losing bits and fasteners. Get screws into places you never thought possible before. The SD Driver with Screw Holder is a solution to a couple of problems that come with using a regular screwdriver. Luckily, you don’t have to worry about those anymore.

• [QUICK DRAW BIT CHANGE] This SemiAutomatic Driver switches between 6 bits with a slide-action changer. Cycle from Phillips to flathead and four more of your favorite bits with just the flick of the thumb
• [HOLDS A CHARGE FOR MONTHS] Up to 18 months, as a matter of fact. The efficient 4v MaxLithium battery gives you the driving power you need, and will still have a charge the next time, even if that’s months from now
• [SCREW HOLDER] This innovative attachment keeps the screw in place so you can use the SD Cordless Screwdriver with just one hand
• [NEVER LOSE A BIT] Store bits in the internal Rapid Reloadable Cartridge. No more fumbling in your pockets or watching a bit fall through a floorboard
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [COMES WITH 6 BITS] The reloadable cartridge comes stocked with a PH1, PH2, SL4, SL6, SQ1, and SQ2. Everything you need to get driving
• [COMES WITH CHARGER] The battery is internal, so you just connect the included charger when you need to top it up
• [ONLY 1.1 LBS] At that weight you can drive screws all day without hand strain. And that makes it maneuverable, too. Hold it up high and get into tough places without fatigue

User questions & answers

Question:	Is it one speed like it´s Predecessor or does it have adjustable speeds
Answer:	Yes, it will charge 18V-li-ion battery!
Question:	Is the screw holder detachable? Can a longer extension bit be used without the screw holder interfering with it
Answer:	Yes, it is compatible with that model battery. This charger works with all Ridgid 18v batteries. Thanks! -Chris
Question:	Can you use 1/4" shank drill bits
Answer:	I bought it because it stated it fits all Dewalt 20V products. If there is a hole for the screw to go in, it should fit
Question:	Is this California legal? Is there a high capacity screw magazine available
Answer:	Can you send a picture of the handle including where the battery slides on?

Product features

Powerful 4V Max Lithium Battery

The integrated on-board battery holds a charge for 18 months and plugs right into AC when you need to recharge.

No More Dropped Screws

This screwdriver holds the screw in place for you, and you can operate it with just one hand to get into hard to reach places.

Slide Action Bit Change

Cycle between your favorite 6 bits by pumping the shaft. No more dropping bits on the ground or down the ladder and trying to find them.

A Better Version of the Screw Driver

We took all the bad things of the traditional screwdriver: dropped bits, needing two hands to drive a simple screw, having to supply the torque by hand—and designed a better tool. The ingenious screw holder allows for the driving and removal of screws with just one hand.

Light and Compact

Since you only need one hand to do the work, it is small enough to fit into tight spaces and you can reach into places you never could if you needed to get both hands in there. And the on-board LED headlamp lets you see what you’re doing in dark spaces.

Product description

Jump back and forth between your two favorite bits with the 20V Power Share Switchdriver 2-in-1. With two rotating chucks, you can reserve one bit for the pilot hole and one for driving the fastener and just instantly switch between the two—no fumbling for bits in your pocket or dropping them down a ladder. And there’s no need to keep a second drill lying around. It makes projects where you need multiple bits go much, much faster. You can even keep one hand free to hold the project while you rotate the chucks with your other hand and a little help from your thigh or forearm. Just squeeze the red dual chuck release button and press the head against your arm or leg to switch it over. Easy-peasy. With 12 torque settings, up to a max of 265 in-lbs, you can find just the right amount of torque for the job, and not worry about stripping screws or damaging the project surface. And with two speeds, 0-400 revs/min, 0-1500 revs/min, you have the flexibility and power to finish any common drilling application. A 20V Power Share battery and charger are included with this Switchdriver, which you can switch out with any Worx Power Share tool on the platform. You save tons of money when you only need a few batteries to run an entire tool collection.

• [TWO BITS AT ONCE] Easily and instantly alternate between two bits on the innovative Switchdriver head. Drill a pilot hole then the screw, all without switching tools or bits
• [STRIP-PROOF] Automatic torque control stops you from stripping screws. It also prevents you from damaging the surface of the project
• [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [2 SPEEDS] Variable gear train lets you go slow for backing out or drilling into tricky materials, or fast for driving your screws home
• [JUST PRESS THE BUTTON] Switch between the alternating ¼” chucks just by pressing a button. The heads rotate 180-degrees and you get a whole new tool without having to get down from the ladder
• [LED WORK LIGHT] Work in dark or dusty spaces with the trigger-activated LED light. An illuminated workspace is a safe and efficient workspace
• [LIGHTWEIGHT, COMPACT] At just 2.75 lbs., you can use the Switchdriver all day without strain. At that weight, you can maneuver into high and tough to reach spaces

User questions & answers

Question:	How much power does this have compared to dewalt or bosch and what is the typical battery life under heavy use
Answer:	This model is rated at 310 in-lbs of torque at 400 rpm. Dewalt's DCD995/990 is rated at 708 in-lbs at 450 rpm (faster and stronger). The Dewalt is also capable of up to 2000 rpm vs. the WORX's 1500 rpm. However, Dewalt's $100 model (DCD771) is less than half as powerful as their flagship, but still slightly more powerful than the WORX. Having said that, the WORX should be more than powerful enough to do most things around the house (if that's what you're using it for). 310 in-lbs is a lot of torque. You only need around 75 in-lb to drive deck screws. But these days I've discovered than an impact driver is far better at driving screws because you don't have to put nearly as much pressure on the head of the screw. Impact drivers are far more powerful (1850 in-lbs).
Question:	Is the drill strong enough to use with a Kreg pockethole jig? The concept is fine but there are questions...drill size, strength
Answer:	Used it with my Kreg setup with no problem, unit is easy to handle and more then powerful enough
Question:	Specs say bare tool; what does that mean
Answer:	Usually "bare tool" is specified when you order without batteries or charger and use with another WORX tool that uses the same battery. I do not believe this tool is available that way as of yet. My tool came with two batteries, a charger and several 1/4" drive bits.
Question:	Does the switch driver come with a battery charger and extra battery
Answer:	Mine came with 2 batteries.

Product features

Built-In LED

This trigger activated light illuminates any work area, so you can see what you’re drilling in the dark. Perfect for working in basements, outdoors, or tight spaces without lighting.

Rotating Head for Instant Bit Switching

Dual ¼” chucks let you keep your 2 most useful bits always installed. Use one, twist, use the other. No more fumbling for bits or having to use two drills.

Variable 2-Speed Gear Train

Slow for backing out fasteners or for drilling into certain surfaces, fast for the other stuff. 2 speeds to handle every common drilling and driving application.

Electronic Torque Control

This feature helps you manage force, so you won’t over-drill. It virtually eliminates stripped screws and damage to the work surface.

Drill, Rotate, Drive

Drill your pilot hole, rotate the Switchdriver head, drive in your fastener. Drill, rotate, drive again. It makes laborious tasks like building a deck or putting up a fence go much, much quicker.

Tool-less Quick Change

And when you need that 3rd or 4th bit the ¼” hex quick-change chucks don’t require any tools. Just pull the collet locking sleeve away from the tool, replace the bit, and let go. That’s it. Your bit is perfectly seated and tightened.

Product description

Drill a pilot hole, turn the head and drive in the screw, drill another pilot hole, drive in another screw all without changing out a bit or grabbing another drill. The Switchdriver with 67-Piece Accessory Kit from Worx is the most flexible and well-rounded drilling bundle money can buy. It’s compact and lightweight—less than 3 lbs—so it’s easy to maneuver and use for long stretches without your hands getting tired and cramped. Yet there are so many modern features onboard that this drill hardly requires any hard work from you, anyway. 12 electronic torque settings, and 2 speeds (0-400 rpm / 0-1500 rpm) let you find just the right amount of power and rotation for each task—and once you do, those screws slide in easy and almost seat themselves. No more fumbling with bits in your pocket when you’re on a ladder and then dropping them down to the ground, because your two favorite bits live on the tool. You can even rotate between bits with just one hand so you can use your free hand to steady the project (just press the rotation release button, and press the rotating head against your other forearm to advance to the next bit). Any project that requires a lot of drilling, and/or a lot of switching between bits, like building a deck, is perfect for the Switchdriver. You’ll save so much time and strain. And when you do need to manually switch out bits, the ¼” chucks change out without the need for tools or a hex key.

• [SWITCH BETWEEN 2 BITS INSTANTLY] No need to stop to change out a bit, just turn the head to cycle between your 2 most useful bits
• [ELECTRONIC TORQUE CONTROL] Get the perfect amount of torque for the task at hand—prevents stripping, peeling, and damaging the work surface
• [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [LED WORK LIGHT] With a headlamp right on the front of the Switchdriver, you can see what you’re drilling in dark areas
• [2-SPEED GEARING] Between the 2 speeds and the 12 torque settings you have enough flexibility to do every common drilling application correctly
• [1/4” HEX QUICK CHANGE CHUCKS] When you do need that 3rd or 4th bit, the standard chucks accept all regular ¼” bits you find at your neighborhood hardware store
• [67-PIECE ACCESSORY KIT] Includes 2) 1.5Ah batteries, 1) 5-hour charger, 11)HSS Twist Drill Bits, 5) Spade Wood Drill Bits, 4) Tile Drill Bits, 2) 6” Power Screwdriving Bits, 7) 2” Power Screwdriving Bits, 1) Bit Holder, 17)1” Insert Bits, 3) Nutsetters, 8)SAE Sockets, 8) Metric Sockets, 1) 1/4” Drive Socket Adapter, Blow-molded case

User questions & answers

Question:	Does the Drill and battery fit inside the case with the drill bits? Or is the case just for the drill bits
Answer:	Returned this item Didn’t like the electric shocks it gave on my skin
Question:	De que voltaje es el alimentador del cargador, de 220v o 110v
Answer:	Hi, the wave length of led lights: red light--650nm; green light 540nm; blue light--470nm.
Question:	Does the worx switch come with a brushless motor
Answer:	Hi, under blue light mode, 6200 times/min; Under green light mode, 6800 times/min; Under red light, 7000 times/min.
Question:	What is a good compatible drill and driver set for the switchdriver
Answer:	Just use a vitamin E oil or cream when you use this little miracle worker I use it on the red all over my neck and face I have ugly bags under my eyes and it tightens in just minutes If your younger then 50 you might want to use the blue,or green light Test it the lower wave lengths (blue/green) around the eye area Red for neck, chest for firmer tones

Product features

Built-In LED

This trigger activated light illuminates any work area, so you can see what you’re drilling in the dark. Perfect for working in basements, outdoors, or tight spaces without lighting.

Rotating Head for Instant Bit Switching

Dual ¼” chucks let you keep your 2 most useful bits always installed. Use one, twist, use the other. No more fumbling for bits or having to use two drills.

Variable 2-Speed Gear Train

Slow for backing out fasteners or for drilling into certain surfaces, fast for the other stuff. 2 speeds to handle every common drilling and driving application.

Electronic Torque Control

This feature helps you manage force, so you won’t over-drill. It virtually eliminates stripped screws and damage to the work surface.

Drill, Rotate, Drive

Drill your pilot hole, rotate the Switchdriver head, drive in your fastener. Drill, rotate, drive again. It makes laborious tasks like building a deck or putting up a fence go much, much quicker.

Tool-less Quick Change

And when you need that 3rd or 4th bit the ¼” hex quick-change chucks don’t require any tools. Just pull the collet locking sleeve away from the tool, replace the bit, and let go. That’s it. Your bit is perfectly seated and tightened.

Product description

The Worx 20V Power Share Drill Driver was made to handle every common drilling task you can think of, and then some. Whether it’s a “honey-do” job around the house or some more “serious work” down in the shop, this drill was made for the big and little stuff.

• [2-SPEED GEARBOX] 0-400 or 0-1450 rpm gives you the flexibility & power to handle every common household or workshop drilling application
• [15+1 CLUTCH&3/8” CHUCK] 16 different positions with up to 265 in-lbs. of max torque, to find exactly the right amount of torque for each project; The most commonly sized chuck to handle the most popular bits. And it’s keyless, so you can quickly switch them in and out
• [30-PIECE ACCESSORY KIT] Brad Point Drill Bits, (10) 1-inch Screwdriving Bits, 2-inch Screwdriving Bits, Nut Drivers, Magnetic Bit Tip Holder
• [SLIM & LIGHTWEIGHT& LED HEADLIGHT]you can get a firm grip and slip this drill into tighter places than other drills; Never drill in the dark! This long-lasting LED lamp illuminates any poorly-lit working area. And it doubles as a low battery indicator, so you’ll know when to grab a new battery
• [DO IT ALL WITH THE SAME BATTERY] Do it all with WORX Power Share, the only cordless tool platform that uses the same battery to power 20V, 40V, and 80V tools

User questions & answers

Question:	Is there a storage case that comes with it
Answer:	No there is no storage case that comes with this drill that would be nice To have one
Question:	Is this drill brushless
Answer:	No. I returned this item because of sparking and burning smell. The battery was hard going on and near impossible to remove. First worx product that I have had trouble with and I have many. Worx does sell a brushless drill that I will be ordering.
Question:	How long does it take to charge the battery
Answer:	3 or 4 hours... give or take...
Question:	Can I use my existing bits or do you have to have worx bis
Answer:	You can use your existing bits. And it comes with a nice set. It is standard drill setup that opens and closes onto whatever bit you put in.

Product description

There’s nothing more satisfying than grabbing your trusted tool and building or fixing something – making it better – using your own two hands and ingenuity. Well, WORX has introduced a new device that’s sure to be on your favorites list when it comes to tackling projects around the house. It’s the Ai Drill – the first cordless drill with Advanced Intelligence. No other power drill in the marketplace has its combination of features and functions. The new WORX Ai Drill adds a whole new dimension to cordless power drill convenience with its exclusive BitLock, Safe Drive and Pulse Assist features. Advanced Intelligence can be defined as a machine’s capability to imitate intelligent human behavior, and that’s just what WORX engineers had in mind when they developed the Ai Drill. It’s almost intuitive and so easy to use that first-time users and DIYers will breeze through home and craft projects. The Ai Drill has three drive modes including drill, Safe Drive and Pulse Assist, which are activated by a switch on the top of the drill. BitLock is one of the key features of the WORX Ai Drill. Load a drill or driver bit into the tool’s chuck, and its motorized jaws will self-center and tighten the bit, and do it with 30 percent more bit-holding torque than tightening the bit manually. This kit includes AI Drill, 20V Power Share Battery, Charger, Interchangeable bit screwdriver, 10ft Tape measure, Spirit level, Utility knife, 3 Allen wrenches, 18 1" Screwdriver bits, 10 2" Power driving bits, Magnetic bit holder, 5 Brad point drill bits, 5 HSS drill bits, 4 Masonry drill bits, 3 Power nutdrivers.

• [BITLOCK] One-hand operations lets you quickly and easily swap out bits. Bits are self-centered and secured 30% tighter than tightening manually.
• [SAFEDRIVE] Stops screws safely and automatically, then backs away once your screw is flush to the surface. Any screw, any material, no damage.
• [PULSEASSIST] Automatically applies the perfect amount of bit rotation – no overtightening or stripping the screw. Easily remove stubborn and even stripped screws.
• [SHARE 20V BATTERY WITH OTHER PRODUCTS] Our powerful, efficient 20V MAX battery powers the Ai Drill and the entire Power Share family of tools.
• [LED LIGHT] Trigger-activated LED light illuminates your work area for ideal visibility under any working conditions.
• [KIT INCLUDES] AI Drill, 20V Power Share Battery, Charger, Interchangeable bit screwdriver, 10ft Tape measure, Spirit level, Utility knife, 3 Allen wrenches, 18 1" Screwdriver bits, 10 2" Power driving bits, Magnetic bit holder, 5 Brad point drill bits, 5 HSS drill bits, 4 Masonry drill bits, 3 Power nutdrivers.

Product description

This versatile, powerful, and compact 20V Impact Driver was designed to be strong enough to get the job done, yet small enough to get into narrow spaces. So you can bring all this force to places other drills have trouble fitting into. Its motor has been engineered with efficiency in mind, so it wastes little battery while still doling out 0-3300 bpm and 1500 inch/lbs of torque. Control the speed by pulling harder on the trigger, so you can decide exactly how much force each fastener requires. And the forward and reverse switch lets you back out slowly, too. The quality-of-life features on this drill are what sets it apart. It’s smaller and lighter than other drills with similar specs, so you can grip it tighter. Its handle is designed to be used for long stretches with its soft, overmold construction. And the LED light prevents you from ever having to work in the dark. The ¼” hex chuck accepts all popular brands of bits and comes with a #2 Phillips screwdriving bit, as well as a 5-hour charger and 20V 1.5 Ah Power Share battery. And that battery can be used on any power or garden tool on the Worx PowerShare platform. It’s an Impact Driver with modern features to make it easier on the user, but still built to perform for decades to come.

• [EXTREMELY COMPACT] At only 2.42 lbs., this powerful but slim impact driver was designed to be both comfortable to use and able to fit into tight spaces
• [LED HEADLIGHT] The lamp illuminates when the trigger is pulled and allows for visibility in dark work areas. And the LED low battery indicator lets you know when it’s time to swap out batteries
• [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [ERGONOMIC DESIGN] The soft-grip handle makes it easy to use for long stretches, and the overmold plastic casing covers all touchpoints for a consistent grip
• [VARIABLE SPEEDS] Just pull harder when you want more power and ease up for more delicate work. Go from 0-2600/min as needed
• [FORWARD AND REVERSE] Just flip the switch to toggle between forward and reverse
• [INCLUDES] 20V Impact Driver, 1.5Ah Battery, 5-Hour Charger, #2 Phillips Screwdriving Bit

User questions & answers

Question:	Does the device include a battery and charger? How much volt a charger - how many hertz
Answer:	Roughly 16 by 12 by 4.5 Inches
Question:	Is this the non brushless one
Answer:	16.4 ft.

Product features

Compact & Lightweight

So you can get into tighter spaces or hold it up over your head without much of a problem.

LED Light

No more drilling in the dark. You’ll still be able to see what you’re doing when you get into a crawl space or behind drywall and there isn’t an overhead light.

1/4 in. Hex Quick Release Chuck

Accepts all popular brands of bits, so you can pop over to the local hardware store when you need something. And it comes with a #2 Phillips screwdriving bit to get you started.

More Power & Speed Than Standard Drill/Drivers

Made specifically for driving fasteners into tough materials, you get significantly more force from this 20V impact driver than you would with an everyday drill.

Micro-Texture Grip for Optimum Comfort

Ergonomically designed to be easier to grab and use for long stretches. You can drive fasteners for a while and feel it less in your hands than you would from other 20V cordless impact drivers.

Power Packed & User-Friendly

All the torque you need to pull out old rusted bolts and drive large screws quickly and easily. What’s more, this driver directs the force into the surface material, not back into your hands.

Make This Your Designated Driver

At only 2.42 lbs. without the battery attached, this compact but powerful 20V impact driver is easy to operate, easy to get into small spaces with, and easy to use for long stretches. Plus, the streamlined design makes it easier to grip, so you have more control.

Product description

WORX WX252L XTD Extended Reach Screwdriver

• Patented extending shaft reaches into recessed areas and helps drive screws straighter and with less slipping
• Lithium-ion battery technology: high capacity, no self-discharge and no memory effect
• Auto spindle lock for optional use as a manual screwdriver
• Offset chuck for access in tight corners
• Works with any 1/4-Inch Insert Bit
• UPC: 845534012743

User questions & answers

Question:	What voltage is the battery? does it charge via usb or cylindrical plug
Answer:	READ the listing of including items!
Question:	Is the shaft magnetic for holding bits as well the screws. If it is how well does the magnetism hold
Answer:	Yes this is the non-brushless one. I bought this on accident. I meant to get the brushless one, but this one is still pretty strong. I think the brushless is a little stronger. This sometimes needs help to get lug nuts off, which may have just been tightened too much.
Question:	can someone confirm please is it 110v or both 110\220v 50\60Hz ? also does it accept standard 6 sided bits
Answer:	Yes it does have a scraper attachment
Question:	Charging voltage
Answer:	the chord is 16.4 ft. The warranty is 3 years if you register the tool at the FEIN US website after purchase. There is a standard one year, and the registration adds an additional 2.

Product features

WORX XTENDED REACH DRIVER

The WORX Xtended Reach driver goes where no driver has gone before. The offset design with a built in driver extension make this an extremely versatile tool. The adjustable shaft extends reach up to 2 inches with ten stopping points between 0 and 2 inches. The offset shaft further improves access to hard-to-reach areas. The XTD also offers a Compact and lightweight design.

Tight Corners, Dark Spaces, No Problem

The WORX XTD Driver is compact and light weight which allows you to get it into small spaces easier. With the Extended reach, you can now access those tough to get places with out straining or being at an awkward angle. The offset reduces the stripping of screws and wearing of bits from driving at the wrong angle. The XTD also has an LED light that helps you work in dark areas like cabinets or closets.

Work Against a Wall

The offset driving shaft allows you to work up against a wall or solid surface with out having to drive at an angle.

Reach without an extension bit

The Extended reach eliminates the need to go find or buy an extension bit to get the job done

Light Weight

The light weight design allows for repetitive use without fatigue

Lithium Power

The 4V Li-on battery gives you enough power to get those around the house projects done

Technical Info

Rated voltage: 4 volts Max

Battery capacity: 1.5 Ah Li-ion

Rated no-load speed: 230 rpm

Chuck size: ¼” Hex

Max torque: 36 in-pounds

Charging time: 5 hours

Machine weight: 1.1 pounds

Product description

Providing double the runtime of our standard 2.0 Ah Power Share battery, this 4.0 Ah version is for bigger yards or tougher jobs. When you need twice the juice to get that project done, this is the battery for you. It powers everything on the platform: Saws and leaf blowers, drill/drivers and trimmers, lawnmowers and nail guns. So, theoretically, you could power your entire Worx Power Share collection on just this one battery. Think of the money you’ll save. Max Lithium-Ion technology makes for a lighter, longer-lasting battery than other designs. They won’t wane or drain, and you’ll get a full charge every time you fill it back up on the charger. Previous versions of rechargeable batteries would suffer from the dreaded memory effect, which would prevent them from fully recharging as they got older. Not these. You’ll get a full charge all throughout its lifetime. This battery is intended to be used with the following chargers (not included): WA3742, WA3868 quick charger, WA3875 dual-port charger, WA3878 dual-port quick charger. Whether you’ve been on the Power Share platform for years, or you’re just beginning your collection, you’ll save money and be free from the cord. Stop paying at the pump, or getting snagged on trees, and enjoy the cordless power tool lifestyle.

• LONGER, STRONGER: Our longer-lasting 20V battery—4.0 Ah provides up to double the run time of a 2.0 Ah battery. Make sure you have enough to finish the job
• STEP ON THE GAS: Get rid of all the downsides of gas (cost, fumes, mess) but keep the power. The 4.0 Ah is professional strength. It’s cleaner, greener, meaner
• DO IT ALL WITH THE SAME BATTERY: Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• QUICK CHARGE, LONG LIFE: Max Lithium batteries charge faster and have a longer life. That makes the job easier today and tomorrow. And it’ll save you a bunch of money in the long run
• BIG POWER IN A SMALL PACKAGE: These batteries are solid yet lightweight, which makes for a lighter tool and helps reduce fatigue while you're working
• MULTIPLE WORX CHARGERS: Suggested for use with WA3742 20-Volt Lithium charger, or WA3868 20-Volt Lithium quick charger. Or consider a dual-port charger like WA3875 or a dual-port quick charger like WA3878

User questions & answers

Question:	Will this work on a WA3868 quick charger
Answer:	cylindrical plug. output is 4.2volts, input is 240volts
Question:	Will wa3578 replace a wa
Answer:	It won't hold screws, but holds the bits too firmly. You might need plyers to pull the bit out.
Question:	will this battery work on the jawsaw
Answer:	It is 110v and accepts standard 6 sided bit.
Question:	Does the battery come with a charger (either normal or quick charge) or just the battery alone
Answer:	The charger voltage is 100-240V~50/60H and the rated voltage of this tool is 4V with a battery capacity of 1.5Ah lion battery.

Product features

Charges Quickly, Won’t Wane or Drain

Made of efficient MaxLithium technology, which is designed to be charged over and over for a full “refill” each time. Onboard “fuel-gauge” lets you see how much charge you have left to finish the job.

Double the Runtime

This 4.0 Ah battery delivers up to twice the runtime of our standard 2.0 Ah Power Share battery.

Gas-like Power, Emission Free

You don’t have to deal with the fumes of gas-powered tools—you’re neighbors will appreciate that. And rechargeable batteries are more cost-effective than gas.

Get up to 2X as Much Done

Twice as Nice: It’s like having two batteries in one. On a single charge, our GT Trimmer/Edger/Mini-Mower will trim up to ½ an acre when using this 4.0 Ah battery. When you can get tasks done in one go, you have more time to enjoy your weekend.

Can Run 20V, 40V, 80V Power & Lawn & Garden Tools

Great by Itself or With a Buddy: This battery can power every 20V tool on the Power Share platform, and when you team it up with another, every 40V tool. Four of them will even power our 80V tools! This battery is the building block of an enormous, cost-effective tool collection.

Product description

There’s nothing more satisfying than grabbing your trusted tool and building or fixing something – making it better – using your own two hands and ingenuity. Well, WORX has introduced a new device that’s sure to be on your favorites list when it comes to tackling projects around the house. It’s the Ai Drill – the first cordless drill with Advanced Intelligence. No other power drill in the marketplace has its combination of features and functions. The new WORX Ai Drill adds a whole new dimension to cordless power drill convenience with its exclusive BitLock, Safe Drive and Pulse Assist features.

Advanced Intelligence can be defined as a machine’s capability to imitate intelligent human behavior, and that’s just what WORX engineers had in mind when they developed the Ai Drill. It’s almost intuitive and so easy to use that first-time users and DIYers will breeze through home and craft projects.

The Ai Drill has three drive modes including drill, Safe Drive and Pulse Assist, which are activated by a switch on the top of the drill. BitLock is one of the key features of the WORX Ai Drill. Load a drill or driver bit into the tool’s chuck, and its motorized jaws will self-center and tighten the bit, and do it with 30 percent more bit-holding torque than tightening the bit manually.

The motorized chuck also reverses to release the bit when it‘s time to swap bits or for storage. To engage BitLock, simply turn and hold the switch ring until the chuck’s jaws have moved to the desired position.

With Safe Drive, the Ai Drill stops screws automatically, delivering the amount of torque necessary to drive the screw in almost any material, and then backs off once the screw head is flush to the surface. Most cordless drills have clutch settings, and the user selects the setting based on the material in which they’re drilling holes or driving screws. The WORX Ai Drill has no clutch settings, instead relying entirely on the tool’s internal electronics to safely drill holes, drive and remove screws, regardless of the work material. Pulse Assist instructs the Ai Drill to apply just enough bit rotation to drive the screw snug to the surface without overtightening or stripping the screw head. This helpful feature also works in reverse to back out stubborn screws without damaging the screw head.

The 3.1 lb. (with battery) WORX Ai Drill is powered by a 20V MAXLithium 1.5 Ah battery. The battery is compatible with other WORX 20V battery packs used in DIY and lawn and garden tools and is part of WORX 20V Power Share program. The MAXLithium battery recharges to full capacity in about five hours. The drill also features a low battery capacity indicator. When the battery’s power is running low, the drill’s LED light flashes.

The single speed (0-800, no-load) drill has a 3/8” chuck. The drill is capable of handling a variety of drilling and driving jobs with 180 in./lbs. of torque. An LED light illuminates the work area and is activated by the trigger. The tool’s drilling capacity is 1” in wood and 3/8” in mild steel.

• Compact smart drill with Advanced Intelligence (Ai) Technology makes every project easier – less than 3 lbs. means reduced fatigue and convenient storage
• Automated BITLOCK allows one-hand operation while providing 30% more holding force than typical manual chuck
• SAFE DRIVE stops driven screw flush with work surface, prevents damage to work and screw
• PULSE ASSIST prevents bit from slipping when drilling on hard surfaces and when driving or removing soft or worn screws
• Share battery across multiple WORX tools within the 20V Power Share platform

User questions & answers

Question:	What is the torque rating of this drill? amazon says 265 in-lbs, but the worx website says 180 in-lbs for this part number drill
Answer:	no the max torque is 180 in-lbs and it is a outstanding tool
Question:	Aside from Worx brand, what brand of bit set is compatible with this. I would appreciate if you share me a link. Thank you
Answer:	Any bit set will work just fine.
Question:	How about drilling though concrete
Answer:	It’s a great light duty drill but concrete I would reserve for a plug-in hammer drill even for small jobs and get high quality concrete drill bits.
Question:	Is the motor brushless
Answer:	No, this is not brushless.

• Includes 20V Li-ion batteries for extended run time
• Mega-torque Impact Driving technology for driving fasteners with ease
• Impact Driver has Trigger-operated speed control
• 3/8” keyless chuck for quick bit changes on the drill
• 2 gears on the drill will handle every common drilling application

User questions & answers

Question:	Does the drill can control forward&reverse
Answer:	I'm not sure on that model. I have a Milwaukee drill model 0612-22. 14.4V compact drill. The battery works fine in mine and charges good.
Question:	How many speed levels of this drill
Answer:	Both will work. The 3000 last longer under heavy use
Question:	Does the combo come with a carry case
Answer:	Yes, this charger will charge all Ridgid 18v batteries, including the R840083.
Question:	is the drill a hummer
Answer:	I think that if its a ridgit battery and i have several 18v that you might be ok.

Product description

The Black and Decker LD120-VoltA 20-Volt Max Lithium Drill/Driver with 30 Accessories come with the Black and Decker 20-Volt max Lithium Ion Battery. These batteries are always ready, holding a charge up to 18 months. This drill provides an extra level of control with a 24 position clutch that helps to prevent stripping and overdriving screws. It has a soft grip handle that provides added comfort during use and a light weight to prevent user fatigue. This drill is ideal for drilling and screwdriving through wood, metal, and plastic. The LD120-VoltA set includes: LD120 20-Volt MAX Lithium Drill/Driver, LB20 20-Volt MAX Lithium Ion Battery, LCS20 Charger, Brad Point Drill Bits, (10) 1-Inch Screwdriving Bits, 2-Inch Screwdriving Bits, Nut Drivers, Magnetic Bit Tip Holder and is backed by Black and Decker's 2 Year limited warranty.

• Ideal for drilling through or screwing in wood, metal, and plastic, soft grip handle provides added comfort during use
• The lithium ion battery holds a charge for up to 18 months
• 30 accessories include drill and screw driving bits, nut drivers, and magnetic bit tip holder
• Kit also includes one 20 volt lithium ion battery and charger; Uses: Drilling through wood, metal, and plastic, screw driving though wood, metal, and plastic. RPM: 0 650 rpm
• Chuck size: 3/8 inch; Clutch setting: 24; Included components: LD120 20 volt max Lithium drill/driver, LB20 20 volt max Lithium ion battery, LCS20 charger, brad point drill bits, (10) 1 inch screw driving bits, 2 inch screw driving bits, nut drivers, magnetic bit tip holder; Power source: Cordless

User questions & answers

Question:	What are the nut driver sizes
Answer:	The nut drivers are 3/16, 1/4, 9/32, 5/16.
Question:	Is this charger work in 220 Volt, and is this can drill con'c wall
Answer:	My husband says that you will need to buy a concrete bit which did not come in the kit. the bits that came with the drill are good for wood and metal. The charge is for 110 volt. Hope this helps.
Question:	Can l ues it to change tires
Answer:	Absolutely not. The lug nuts on tires are larger and require something like a torque wrench.
Question:	what size drill bits does it come with
Answer:	It came with 6 different drill bits I don't know how to classify the sizes.

Product description

B&D LITHIUM SCREWDRIVER - Stanley Black & Decker is a world-leading provider of tools and storage, commercial electronic security and engineered fastening systems, with unique growth platforms and a track record of sustained profitable growth. Included Components: LI4000 screwdriver, Charging Cradle, Wall-mount assembly kit, 1" Screwdriving Bits, 2" Screwdriving Bits, Nutdriver, Hex Drill Bit, Bit Bar

Ideal for around-the-house jobs, the Black & Decker LI4000 3.6-volt lithium-ion SmartSelect screwdriver with magnetic screw holder is an ideal tool for basic home repairs. Perfect for professionals and weekend warriors alike, the LI4000 prevents stripping, stays charged for up to 18 months, and boasts a compact, portable design.

LI4000 Screwdriver At A Glance: Magnetic tip prevents you from accidentally dropping screws 6-position clutch and Smart-Select technology prevent stripping Tool stays charged and ready for up to 18 months

Quick and easy torque selection. View larger.

Patented retractable magnetic screw holder.

Drive Screws Without Stripping

Perfect for a range of household jobs, this compact, ergonomic driver delivers 70 inch/pounds of torque at 180 RPM for efficient, comfortable performance. Use it for furniture assembly, lighting projects, and a range of other projects, including shelf, towel bar, and cabinetry installation.

The LI4000 has two specialized features that prevent stripping by preventing overpowering of delicate fasteners. The first is a six-position clutch with visual indicators, and the second is Black & Decker's exclusive SmartSelect technology, which allows for quick and easy torque selection. An added bonus, the LI4000 features a magnetic tip that prevents you from accidentally dropping screws.

Chock-Full of User-Friendly Features

The LI4000 also includes a forward/reverse switch with an easy-to-read indicator window and a built-in LED work light that provides visibility when working in low-light or enclosed areas.

For further convenience, a mountable charging base neatly holds accessory bits and an LED indicator makes it clear when it's time to recharge the battery.

Lithium-Ion Battery and Energy-Star Charger Provide Performance

The LI4000 is powered by an efficient, rechargeable 3.6-volt lithium-ion battery that holds its charge longer than traditional batteries to deliver reliable performance job after job.

The included battery charger is Energy-Star rated, which means it meets strict energy-efficiency guidelines set by the US Environmental Protection Agency and the US Department of Energy. Battery chargers with the Energy Start rating have the potential to save more than one billion kilowatt hours of energy per year and $100 million in related costs in the U.S. alone. Moreover, if every American used energy-efficient chargers, we could prevent the release of more than one million tons of greenhouse gases into our environment, which would be equivalent to taking 150,000 cars off the road each year.

Along with the Energy-Star rated battery charger and 11-piece accessory set, the LI4000 screwdriver is backed by a two-year warranty.

What's in the Box

LI4000 Screwdriver; charging cradle; and 11-piece accessory set.

Brand Story

By

From the Manufacturer

The Black & Decker 3.6 -volt Lithium Ion Smartdriver redefines what a cordless screwdriver should be. Featuring an exclusive patented retractable screw-holder with magnetic tip that prevents you from dropping screws, you can easily drive screws with one hand. A well marked forward/reverse window makes it easy to control which direction is selected and an innovative 6-position clutch prevents from stripping of screws. A built-in LED work light provides good visibility when working in dark areas. Lithium-Ion battery technology means that the LI4000 stays charged and ready for use for up to 18-months and features a LED charging indicator light for peace of mind. A wall-mountable/table-top charging case is included.

• Lithium-ion battery-powered screwdriver with magnetic screw holder for basic home repairs and assemblies
• Six-position clutch has visual indicators for easy prevention of stripping
• Charger holds accessory bits and can be wall-mounted
• LED light for increased visibility in dark areas
• Includes a 2-year manufacturer's warranty

User questions & answers

Question:	Does anyone know if this takes standard hex bits or are these bits uique to this model. I have existing standard bits I would like to keep using
Answer:	I don't see why not. Unless you have 40 or 50 screws!
Question:	Can you use it in reverse to unscrew something
Answer:	1/4" hex will fit, but for drilling it's a very slow turn...low RPMs. This is better suited as a screw-driver, guitar peg turner and of course a very slow speed drill, if you're in no hurry. If drilling, I'd stick to small bits...maybe 1/8" or less. Not sure it'll torque a larger bit thru anything. Hope that helps.
Question:	Can this be used for driving short wood screws into pre-drilled holes? And do you think it would be a good choice for a woman's small hand
Answer:	Yes I use it on small nuts and bolts. You will need a hex adapter in 1/4 in drive. works well and fits in small places, plus it is light weight.
Question:	Is it powerful enough to drive into studs
Answer:	Yes I've used it to install blinds actually supports and many other things around the house hope this helps.

Product features

3.6-Volt Lithium-Ion SmartSelect Screwdriver with Magnetic Screw Holder

Great for furniture assembly and other household tasks, this lithium automatic screwdriver lets you select the torque you need to help avoid stripped screws. Comfortable to use with a forward/reverse indicator.

Smart Select Technology

The right power for the job:

Choose the right amount of power and speed for your project with Smart Select technology. Simply match the Smart Select dial to your application. The tool automatically adjusts to deliver the best results for the job.