10 best wet tile saw

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

PORTER-CABLE PCE980 7 in. Table Top Wet Tile Saw features a powerful 1.0 Horsepower motor providing smooth cutting of porcelain, ceramic and Stone tiles. Cast-metal cutting cart delivers 17 in. Cutting capacity, allowing cutting of 12 in. X 12 in. Tile on a Diagonal. Get accuracy of 1/16 in. On cuts up to 12 in. Long. The Pce980 includes Pce980 7 in. Wet tile saw, 7 in. Porcelain tile blade, Miter square, blade wrench. Includes 3 year limited warranty, 1 year free service contract, and 90 day money back guarantee.

• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart
• Splash guard keeps water from spraying the tool operator
• Stainless steel fixed deck holds up to water and jobsite abuse
• Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm

User questions & answers

Question:	how thick will this cut
Answer:	I would say 1:4, if you are cutting porcelain that thick take it slow, natural stone will cut easier. I highly recommend this saw, I use it for small jobs, it’s really great in tight spaces. In my opinion it’s the better of the smaller wet saws as I prefer a rolling table for more accurate cuts. I however use an MK on my bigger jobs and large format tile and stone and it’s a beast with no limitations but cost about 10x what this saw cost. I do a lot of baths and kitchens and I love it!
Question:	Alway problems substituting other brand blades - and can't find PC replacement blades - can anyone confirm good to excellent substitute
Answer:	I've tried several after market blades with this saw. The problem I've experienced is the original PC blade produces a slightly wider cut, allowing the tile to get past the guard support in the back. The blades I've tried produce a thinner cut that prevent the tile from passing around the guard support. I'll try the Pearl P4 7 inch to see if it works, although 50$ is a gamble I'd rather not bet on.
Question:	Can this saw cut glass tiles
Answer:	It can cut glass but without buying a blade specifically for glass tiles you might be disappointed. Every tile installer I know has several different blades always on hand for the abundance of materials thrown at him. Glass Master is a good glass blade and manual cutters often do excellent. With the stock blade you will get some chipping along the cut. Which could be polished out with extra effort. If you can handle chipping go for it.
Question:	Does this saw do miter cuts? Can you angle the blade, or the table
Answer:	Yes, this table saw does simple mitre cuts. The blade is fixed. The table is fixed (does not angle for a compound mitre cut). The product is positioned on the (right) cutting cart that feeds the tile to the blade. The saw comes with a miter square for basic angle cuts.

Product description

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

User questions & answers

Question:	will this saw, with the standard blade that comes with it, cut glass bottles
Answer:	I don't know for sure. I did cut quite a lot of glass tile. I had to a different blade for glass. it did an exceptional job. In fact i used it to install 2500 sqft of tile in my house. It still has good life left in it.
Question:	Need to slice 1/8"-1/2" glass rods coe 104 & 32. Slice cylinder= thickness of rod & length of 4mm. cut should be clean but not pristine. Will thiswork
Answer:	Thank you for your question. The Skil 3550 is not designed for cutting glass, it is designed for cutting tile. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-754-5999
Question:	Does this include a blade? The info @ Amazon says bare tool, yet the Skil website says yes
Answer:	Yes, the blade is included. The tile saw includes the 7 in. Diamond Blade, Side Extension, Rip Fence, Miter Gauge, Blade Guard and Blade Wrench.
Question:	Why is this model so much more expensive than the model is replaced? The 3540-02 was half this price, so what is the difference
Answer:	Thank you for your question. The Skil 3550 can cut tiles up to 18x18 inches, has an aluminum table top and also our Patent Pending HydroLock System which is an innovated upper and lower guard design that keeps water contained near the blade. The Skil 3540 cuts tile up to 12x12 inches, has a stainless steel table top and does not have the HydroLock System. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999).

Product features

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

Product description

The 10 in. High Capacity Wet Tile Saw provides the professional tile installer a 37 in. rip cut capacity, 8-1/2 in. crosscut capacity, and 1/32 in. over 30 in. accuracy . The rip cut capacity in combination with 18 in. cutting clearance (left of blade) allows the user to rip 36 in. x 36 in. tile in half. The crosscut capacity is ideal for 6 in. sill cutting and up to 8 in. x 48 in. plank cutting at a 30% offset. Perform rip cuts up to 41 in. with plunge. The 28-7/8 in. width from column to cart edge allows you to pass through standard 30 in. door frames. When the water tray system is installed, 18 in. x 36 in. and 24 in. x 24 in. tiles are fully contained within the coverage area, limiting mess when working indoors. The stand allows you to set up a workspace on site, and at only 91 lbs., the tile saw is made for portability to and from the jobsite.

• Cutline indicator, rigid frame, and stainless-steel rollers provide cutting accuracy to within 1/32 in. over 30 in. cuts
• 37 in. rip cut capacity (41 in. with plunge) and 18 in. cutting clearnace left of blade allows users to rip 36 in. x 36 in. tile in half
• 8-1/2 in. crosscut capacity is ideal for cutting 6 in. sills and 8 in. x 48 in. planks at a 30% offset
• 91 lbs. for portablility to and from the jobsite
• 28-7/8 in. width from column to cart edge fits through standard 30 in. door frames
• 15 Amp motor provides 1220 MWO for demanding applications
• 18 in. x 36 in. and 24 in. x 24 in. tile fully contained within water tray system, helping keep the work area clean and dry

User questions & answers

Question:	Depth of cut
Answer:	The D36000S has a 3-3/8" depth of cut at 90-degrees.
Question:	Does it come with a stand
Answer:	Yes, it includes the stand
Question:	Can a 4” brick be cut
Answer:	D36000S is designed for porcelain/tiles
Question:	laser guide
Answer:	The D36000S does not have a laser guide.

Product description

This 700XT Tile Wet Saw is equipped with unique side extension table to support large format tiles Features. Easily cuts tile up to 1 25 in thick. Compact and portable with builtin handle. Make rip and diagonal cuts on any size tile. Powerful 34 Peak HP motor for cutting ceramic marble stone travertine and porcelain for porcelain and hard tiles we recommend QEPs Black Widow Blade 67008BW. Water recirculation channel. Lockdown rip guide for fast multiple cuts. Nonslip feet for stability. 225 and 45 angle guide for diagonal cutting. Extension side table. Deep water tray means no refillingSpecifications. Motor 34 HP 120V60Hz 48 Amps. Watts 550W. RPM 3600. Blade Capacity 7. Arbor 58. Depth of Cut 114 Thick Tile. Dimension 988 H x 1574 W x 2008 L. Weight 1905 lbs

• Easily cuts tile up to 1- .25 in. thick
• Compact and portable with built-in handle
• Make rip and diagonal cuts on any size tile
• Powerful 3/4 Peak HP motor for cutting ceramic, marble, stone, travertine and porcelain
• Water recirculation channel

User questions & answers

Question:	Will this cut 12x24” tile
Answer:	yes
Question:	is the dimond disc in the box is well
Answer:	This nail gun uses 18 gauge nails from ¾ in. to 2 in. length. It is the perfect tool for finishing type applications such as installing molding, trim, and shop projects.
Question:	Will this cut 24x24tile
Answer:	Comes with a tool case
Question:	will there be lots of water / sludge splash around the saw
Answer:	There is a version of the charger that will accept 220v. You need to keep looking... I had one in Thailand.

Product description

For over 100 years Delta has been meeting the needs of the most exacting Craftsmen. Engineered for rugged durability and longevity this saw it designed to make you money. The 7 inch Wet Tile Saw has a powerful 13 amp motor that will handle cutting through natural and man-made tile, stone, and pavers. With its diamond cutting wheel it will handle stone up to 2-3/8 inches thick and has a massive best-in-class rip capacity of 24 inches and an 18 inch diagonal cut capacity. This matches many 10 inch tile saws that are on the market. The saw is constructed using a heavy-duty rail system with 12 bearings engineered for exceptionally straight, accurate and smooth cuts. Dual water nozzles can be adjusted for optimal water placement on the blade minimizing messy over-spray and keeping the blade cool for optimal cutting performance. This saw is a beast that is Built-to-Last!

• Powerful 13 amp motor will cut through natural and man-made tile and pavers
• 7 inch diamond cutting wheel handles stone up to 2 3/8 inches
• Largest rip cutting capacity in its Class up to 24”
• Heavy duty rip fence with positive stops at 0°, 22. 5° and 45°
• Heavy-duty rail system engineered for exceptionally straight, accurate and smooth cuts

User questions & answers

Question:	Is the scissor stand included? I just received mine, but came with no stand
Answer:	No, the stand us an additional purchase. Not the easiest instructions on putting it together, but well worth it.
Question:	Where is it made? are the parts made in china? where is it assembled? i don’t want made in china anymore
Answer:	Not sure . Ive owned MK - Rigid- Pearl abrasive and Target wet saws. tile setter for 16 yrs. Overall for the price its a good saw. Good power , great capacity for cutting large tiles. water management system is good.
Question:	Where is this made
Answer:	According to the box, it is made in Taiwan.
Question:	Travertine - 1.25" thick 24" x 16" will this work? I need to cut .5" off of the 24" side and need a table extension to do...or a saw with 24"+ clearan
Answer:	Yes, it will work. I own this saw and have ripped 24" tile within 1/16" accuracy. You'll just need to take it slow given the thickness of your tile. The blade that comes with it is quite capable, however I eventually switched mine out for a Pearl P4. Excellent saw and a pleasure to use.

Product features

HUGE CUTTING CAPACITY

The Delta Cruzer 7 inch Wet Tile Saw with its diamond cutting wheel can handle stone up to 2-3/8 inches thick and has a massive class leading rip capacity of 24 inches and 18 inch tile diagonal cut capacity

BUILT-TO-LAST

Powerful 13 amp motor easily cut through granite, porcelain, concrete and other stone materials. The diamond cutting blade is Grade #1 quality. This saw does not come with one of those cheap blades that you discard before your first use

ACCURACY AND CONSISTENCY

The Delta Cruzer Wet Tile Saw is engineered for accuracy saving on wasted material, reducing rework time and frustration and improving the appearance of your project. Cut after cut you can count on consistently accurate cuts without blade drift

Product description

The FLEX CS 40 wet tile saw is made for use in the stone, tile and glass industries. The powerful 12-amp motor makes it possible for the saw to cut through any tough material. The wet tile cutter is also equipped with a high quality water-feed system that will eliminate the harmful dust particles which are common in dry cutting applications. Includes a side handle for more stability and the CS 40 has the ability to accept a curved cutting blade thus making curve cutting operations safer and easier.

• Blade Size - 5" x 7/8' with 20mm adapter ring
• Tilting range of 0 - 45 degrees
• Max cutting thickness at 90 degrees - 1.6"
• Blade not included
• Powerful 12 amp motor with a no load speed of 12,000 RPM

User questions & answers

Question:	where made it? how long warranty
Answer:	Yes it does. It has a buit in shut off on the connector so unsnapping it will shut the water from the hose too.
Question:	Does it come with a carry case
Answer:	Charges a DCB606 FLEX VOLT battery in 60 minutes. DCB609 will take slightly longer.
Question:	Can you adjust this a saw or guide to cut miters
Answer:	The DCS690X2 is manufactured in China.
Question:	What is the max cut width using the built in guide/fence
Answer:	Yes, it was compatible with my old Makita angle grinder

Product description

The QEP 7 in. Power Pro Tile Wet Saw is designed as a portable saw to handle any professional or DIY project where space prohibits the use of a large wet tile saw. Users will be surprised by the strength of it's true 1 HP, 3600 RPM motor. The power and design of this Tile Wet Saw offers the ability to cut unlimited sizes of the hardest tile including ceramic, porcelain, slate, marble and stone. The water catch system not only reduces water run off but it recycles the water back into the reservoir minimizing fill frequencies.

• UL approved, powerful, 1 HP, 3600 RPM direct-drive motor Ideal for handling small or large tile projects
• 7 in. continuous rim diamond blade positioned for cutting depths up to 1-1/8 in.
• Interior water baffle minimizes excess water spray, reducing water fill-ups
• Table tilts for 15Degree, 30Degree and 45Degree miter cuts
• Rip and angle cutting guides make accurate and repeat cuts easy

Product description

The lightweight and portable MK Diamond 159943 MK-370EXP 1-1/4 horse power, 7-Inch wet cutting tile saw is made to the highest professional specifications. The MK-370EXP weighs 33 pounds and can cut tile 18-Inches long and diagonally cut 13-Inches diagonally. You get close to the same capability as much bigger and heavier saws. The MK-370EXP features built in 45 degree miter system, plunge cut capability makes cutting outlets and other openings quick and easy. The hinged blade guard makes for easy blade changes and maintenance inspection. The MK-370EXP comes with 7-Inch wet cutting diamond blade, water pump, and rip guide. Specifications: Powered by 1-1/4 horsepower electric 120V motor; depth of cut is 2-Inch (51 millimeters); length of cut 18-Inches (457 millimeters); diagonally cut 13-Inches (330 millimeters).

• Lightweight and portable tile saw is made to the highest professional specifications
• Hinged blade guard for easy blade changes and maintenance inspection
• Built in 45° miter system
• Plunge capability makes cutting outlets and other openings quick and easy
• The 5/8-Inch diameter chrome-plated linear guide bar provides smooth, straight, ridgid support for precision cutting

User questions & answers

Question:	Will this saw cut Porcelain tile
Answer:	With the proper blade any wet saw will cut porcelain. Buy a good blade and use a saw with the blade mounted above the tile rather than below.
Question:	What is the distance between the blade and the arm
Answer:	Definitely a challenge to cut large format tiles such as 12x24. If you have to cut lengthwise you have to let the tile sit long towards you over the square edge and use the clamp to keep it straight, that sorta works and if you have to cut a 12x24 in half at more than 9" you are -sol- out of luck, it will not work. The only work around is wasting a chunk of tile by cutting 9" off (and hoping that you can still use that part somewhere) and then cutting off another chunk so you get to your desired length. MK could have made the tray wider by three inches.
Question:	how would this saw work for cutting rock and minerals for lapidary work? thanks
Answer:	I guess it would work depending on the size of the stones. They couldn't be too big. I would use a table type tile saw where the blade sticks up thru a slot. It would give more freedom of movement.
Question:	Can you use a 6 in blade on this unit
Answer:	No a six-inch blade will not reach the table

Product description

The QEP Wet Tile Saw is ideal on job sites where space prohibits the use of a large wet saw. The 3/5 HP, high-torque motor and included 4 in. continuous rim diamond blade cuts through unlimited sizes of ceramic, marble, slate and stone tile up to 3/4 in. thick. This tile saw even cuts mosaic tile and backsplash tile for DIY projects. The water system not only reduces water runoff, it recycles the water back into the reservoir, minimizing refill frequencies. This dependable wet saw includes dual extension tables to support larger tiles and a hinged cutting table for miter cuts. A 4 in. blade with a 5/8 in. arbor is required. For cutting porcelain and hard tiles, we recommend using the QEP Black Widow Blade, sold separately.

• Easily cuts ceramic, marble, slate and stone tile
• Made from plastic to prevent rust and corrosion
• Portable design makes this wet tile saw easy to transport
• Hinged cutting table is adjustable for making 22.5 degree and 45 degree miter cuts
• Includes 4 in. QEP continuous rim diamond blade, rip guide, angle guide and clip-on extension table

User questions & answers

Question:	Does this machine come already assembled
Answer:	All tapcon screws require the correct size pilot hole be made first. After that depending on the size you may not even need any drill.
Question:	Will this saw cut slate roof tiles
Answer:	Xbox is the drill only . No batteries or kit.
Question:	What is the arbor size on this saw
Answer:	I don't think so, but I have not tried!
Question:	Can you cut a 21in tile
Answer:	It is better to use a hammer drill and special masonry drills for concrete. This drill would do it slowly and might wear out the masonry drill faster.

Product features

QEP 22400Q 3/5 HP Torque Master Tile Saw, 4-Inch

The Torque Master XT Portable Tile Saw is ideal on job sites where space prohibits the use of a large wet saw.

• 3/5 HP, hi-torque geared motor for maximum cutting performance
• Dual extension tables add extra 5" of cutting surface
• Cuts ceramic tile, porcelain tile (for porcelain and hard tiles, we recommend QEP's Black Widow Blade #6-4008BW), marble, slate and stone
• Fully adjustable miter guide with unique ratchet mechanism
• Cutting table is hinged to adjust for making 22.5° and 45°
• Water recirculation system saves time when replenishing water supply and keep work area drier
• Includes 4" QEP Continuous Diamond Rim Blade Black Series (6-4001Q)