13 best tabletop saws

Product description

The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.

• [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
• [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
• [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
• [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
• [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
• [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut

User questions & answers

Question:	What is the difference between this unit and the RK7321 BladeRunner
Answer:	It is a 30mm arbor. You have to get metric sizes in blades.
Question:	how would it work w/ making pinewood derby cars
Answer:	the tacklife saw blade has that size arbor ans 120 teeth
Question:	Can it hold up to regular use with 1" hardwood like maple and ash? If not, what will
Answer:	Yes, it can be replaced.
Question:	Is the table made from plastic? It is hard to tell if it is made from black plastic or anodized aluminum
Answer:	No it is not.

Product features

Adjustable Miter Gauge

Make cuts from 0-60° so you can tackle all common woodworking projects that require miter cuts.

Accessory Storage in the Base

For easy transport and organization, just pop the rip fence, miter gauge, and extra blades into the bottom when not in use.

Portable and Powerful

A table saw that you can take with you to the job or easily move around the workshop. Convenient carry handle makes it easy.

Capability of Larger Table Saws

Rip, cross, scroll, and miter cuts are all possible thanks to the standard guard and riving knife system.

5 Blades Included

Wood, ceramic, plastic, aluminum, and metal. Plus, the tool-less blade change system accepts any brand’s standard 4” T-shank blades.

Weighs Only 15 Lbs. for Easy Transport

Throw it in the back of the truck and take it to the job site. That’s not something you can do with a traditional, permanently installed table saw. Saves time when you don’t have to bring materials back and forth between the workshop and worksite.

Make Miter Cuts 0-60° for a Wide Range of Projects

Even though it’s compact, this saw features a standard guard and riving knife system to give you the flexibility and performance of larger table saws. And 5 blades are included to get your started right out of the box.

Product description

The Worx Bladerunner Portable Tabletop Saw is really a table saw that you can take anywhere. Most table saws are enormous and can take up an entire dedicated table in your workshop—and forget taking them out of the workshop and to the job site. But the Bladerunner is made to give you the power of a much larger saw in a form-factor that makes it much more flexible. The rack and pinion fence system enables smooth and accurate cuts. And despite its smaller footprint (15-3/4” x 17”), the Bladerunner easily handles larger shelving and trim materials. It’s the ultimate DIY machine because you can take it anywhere around the house, so flooring, cabinets, racks, and railing projects are all accomplished much easier. Plus, it’s simple to use. This design allows you to keep both hands free, so you can fully adjust the material as you need to. The quick, tool-free blade change system is compatible with any 4” t-shank jigsaw blade. And the base provides on-board storage for its miter gauge, rip fence, and blades. With a stroke length of ¾” and a no-load speed of 3000/min you’ll have more than enough capacity and power to tackle jobs both big and small. Stop bringing projects to your table saw and start bring the Bladerunner to your projects.

• [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts
• [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site
• [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between
• [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip

User questions & answers

Question:	will this work on vinyl fence posts, 5x5? need to create some sleeves by cutting vinyl fence posts
Answer:	No, the 735 has 13" blades, the 734 has 12 1/2" blades. Locating holes are spaced differently
Question:	can the feet lock in place
Answer:	Yes
Question:	blade is not straight in holder, tried new blades, same issue,, any ideas
Answer:	Approximately 29.5"
Question:	is it variable speed scroll saw
Answer:	The stand is definitely strong enough. With the rollers on the stand it is 30 inches tall. I have a heavy duty drill press that is 41 inches tall. I have it on a 28 inch stand and it is a perfect height for me. I use this stand for my planer and the stand is very well built for this application also. The stand top is wood so you would be able to drill mounting holes for your drill press.

Product features

Portable, Adjustable and Accurate

Featuring a rack and pinion fence system, the WORX WX572L BladeRunner x2 Portable Tabletop Saw makes smooth and accurate cuts. This power tool easily cuts a variety of larger shelving and trim materials. Being portable, this table can be carried anywhere around the workstation. This tabletop saw also comes with a traditional guard and riving knife system allows unlimited capacity for cross and rip cuts.

Ideal for DIY and Home Improvement Projects

No matter what you are installing around your house, wooden flooring, cabinets, racks, railings and more, the WORX WX572L BladeRunner x2 Portable Tabletop Saw is lightweight and compact, making it easy to carry anywhere and set up in seconds, to cut wood, tile, plastic, metal and aluminum with ease.

Superior Quality and Durability

This power tool by WORX is pack with a variety of features including a safety switch that prevents accidental starts, a miter gauge, rip fence, multiple blades for different materials and much more. Simple and effective, the WORX WX572L BladeRunner x2 Portable Tabletop Saw is simple to assemble and work with.

Product description

Don't mistake the clamping table's lightweight design for something flimsy and unable to help with the job. It's extremely durable and can hold up to 1000 pounds. The handle makes it easy to carry the table to and from the job, and the storage compartment is ideal for keeping your tools and accessories together. Professionals need a quality workstation where they can start and finish their tasks. The Jobmade Clamping Table is designed for professionals who want a portable table that can hold heavy loads. When the job is done, simply fold the table flat, put your tools in the compartment and carry it to your truck with ease. Want to know some more benefits of the Jobmade Clamping Table? Check these out: Folded dimensions: 34. 65 in L x 21. 81 in. W x 4. 41 in. H Unfolded dimensions: 38. 19 in. L x 25. 39 in. W x 31. 89 in. H Tough enough to handle 1000 lbs. of load, yet lightweight enough to take it wherever you need to go It's made from durable resin, so it'll never rust, rot, peel or fade The table folds flat and is easy to carry thanks to the durable handle It comes with four holding clamps to assist with the job The storage compartment doubles as a tool organizer It has universal metal T-track rails for 2-inch bar clamps Work with confidence on slippery or uneven surfaces with built-in leg stabilizers Resilient, lightweight and portable means you can work just about anywhere Sturdy carrying handle

• DIMENSIONS: Folded: 34. 65 in L x 21. 81 in. W x 4. 41 in. H / Standing: 38. 19 in. L x 25. 39 in. W x 31. 89 in. H
• RESIN CONSTRUCTION: Made of heavy-duty resin with aluminum legs and a work space capacity of 1000 lbs.
• DURABLE AND STRONG: Weather-resistant polypropylene construction prevents rusting, peeling, and denting
• LESS THAN 30 SECOND SETUP: Simply remove the legs from their designated storage space and pop them into the tabletop
• LESS THAN 30 LBS: With its lightweight design and sturdy carrying handle, take your workbench just about anywhere
• EASY STORAGE: Collapses down to 4.4 inches thick for easy storage in a pinch
• ACCESSORIES INCLUDED: Includes four holding clamps to secure a variety of working materials as well as a removable tool organizer that clips into the table to always have on hand

User questions & answers

Question:	Says the T tracks support 2 inch bar clamps, I’m assuming that means throat depth? Can you link or list some exact compatible clamps
Answer:	Bessy 4 in. x 2 in. Bar Clamp
Question:	Is this product identical to the now-discontinued husky portable jobsite workbench from home depot? i have accessories i've already made to fit
Answer:	No. It is an awesome table. I use to to build everything from guns to polishing parts to vise work. It's a great buy
Question:	Is it 32" or 36" to the top of the table
Answer:	36" tall, 32" wide
Question:	Anyone know what the 4 thin plastic pieces are for
Answer:	They slot into the tool box to create compartments.

Product features

The Jobmade Clamping Work Table by Keter

Got a project to start but don't have the right table to help finish the job? The Jobmade Clamping Table by Keter is the ultimate solution for your professional and DIY needs. It's portable, so you can carry it easily wherever you go. Want to know the best part? It has a built-in storage compartment to keep all your tools on hand when you need them and neatly organized in one place.

Built-In Leg Stabilizers

Whether you're working in a professional environment or taking on a DIY project at home, the leg stabilizers will keep the table level no matter the location.

Discreet Storage Compartment

It has a built-in storage compartment to keep all your tools on hand when you need them and neatly organized in one place.

Sturdy Carrying Handle

The handle makes it easy to carry the table to and from the job at your leisure.

Foldable for Portability

Simply fold in the sturdy legs to easily store and maneuver with ease.

Product description

Get the most out of your Centipede workstand with the new CK22T Centipede Tabletop – perfectly designed to turn your Centipede into the ultimate workstation.This heavy-duty top securely fastens to your Centipede P-tops with six easy-to-use twist lock handles so you don’t have to worry about your work surface slipping out from under your project. Hinged in the middle for easy storage and portability,This Centipede accessory makes it simpler than ever to set up and tear down a temporary workspace, whether you’re on the job site or in the driveway. With plenty of dog holes and a high weight capacity, you can build just about anything on your Centipede Tabletop.

• ULTIMATE WORKSTATION: Whether you’re moving from one worksite to the next, or doing a DIY project in your garage or on your driveway, this portable, folding Centipede tabletop makes it simple to set up and tear down.
• TOP IT OFF: The CK22T Centipede Tabletop works with all Centipede Stands, as well as the Centipede 2x4” Bracket, Quick Clamp, and Non-Slip accessories. Full dimensions are 24" x 48" (610 mm x 1200 mm), and it can support up to 2000 lbs (907 kg).
• WORKBENCH STYLE TOP: The Centipede Workbench Tabletop has ¾ inch dog holes spaced evenly across the surface and is compatible with standard Workbench dog hole accessories.
• EASY TRANSPORT: The tabletop is hinged in the center for easy transport and storage, and has a carrying slot so you can hold it in one hand while keeping your other hand free.
• PACKAGE CONTENTS: Package includes 1 Centipede Tabletop plus 6 quick-twist lock handles. Set up instructions are clearly printed on the box along with images.
• MAY NEED MULTIPLE TOPS: Depending on the size of your Centipede work stand, you may need more than one tabletop for full coverage. Model CK6S needs 1, CK9S needs 2, CK12S needs 3, and CK15S needs 4 table tops.

User questions & answers

Question:	I just ordered the table top it did not have the 6 quick fix clamps in the box. Do they come seperatly or is it supposed to come with top? contact
Answer:	It should since the 3 and the Y are the same frame. But I think they work with any of the models.
Question:	Does the top lay perfectly flat across the hinge, even when the centipede is on an uneven surface (grass
Answer:	It should since the Y and 3 are the same frame.
Question:	Anyone selling a metric version with 20mm hole on 96mm centers
Answer:	Yes because part of it is made of rubber. They come in a case so when they’re closed do you want
Question:	What are they made of? mdf? plywood
Answer:	Don't know because I'm not aware of farm jack dimensions. I'd suggest you measure one and compare it to the dimension for the seven sparta. Sorry I couldn't be of more help.

Product features

BORA Centipede Table Top

The CK22T Centipede Tabletop is the ideal way to work. Hinged in the middle for easy storage and portability, this Centipede accessory makes it simpler than ever to set up and tear down a temporary workspace. It can handle just about any job, supporting up to 2000 lbs. With the CK22T Centipede Tabletop, the ultimate workstation is just seconds away.

Lay Flat

Lay the table top on the struts of your Centipede work stand (not included). Once you have the table top in position you are ready to lock it into place.

Lock Quick-Twists

Slide each included quick twist handle into the P-Tops on top of each strut on your work stand. The quick-twists will securely hold the tabletop in place so it does not slide while you are working.

Ready to Work

After you've locked the tabletop into place, you are ready to begin working. The tabletop can support up to 2,000 pounds, which gives you a variety of projects you can accomplish on this work space.

Folds Up

The tabletop conveniently folds up for easy transport. The carrying slot allows you to carry the tabletop in one hand, leaving your other hand free.

CK6S - 2ft x 4ft

The table top is the same size as the CK6S work stand, 24" x 48", only table top is needed for full coverage.

CK9S - 4ft x 4ft

For full coverage on the CK9S work stand, you will need table tops to cover the 48" by 48" work space.

CK12S - 4ft x 6ft

For full coverage on the CK12S work stand, you will need table tops to cover the 48" by 72" work space.

CK15S - 4ft x 8ft

For full coverage on the CK15S work stand, you will need table tops to cover the 48" by 96" work space.

Product description

The Ryobi 7 in. Tile Saw features portability with its compact size that is designed for fast and secure setup. This saw also features best in class cutting capacity with the ability to rip 20 in. tile and diagonally cut 13 in. tile. The tile saw cuts through ceramic, porcelain and stone tiles up to 1-1/4 in. thick with ease and accuracy. This saw has a tilting stainless-steel table to allow bevel cuts at 22.5 and 45 angles. The saw features a rip guide that locks in place on the front and rear rails to ensure precision cuts that are straight every time. Miter guide allows for easy miter cuts from 0 to 45 degrees Locking rip guide sets up along the front and rear scales for added precision Powerful induction motor powers through ceramic, porcelain and stone tile 7 in. continuous-rim diamond cutting wheel offers precision cutting and prevents chipping Cutting table tilts for precise 22.5 and 45 bevel cuts

• Product will either come in original packaging that is in less than perfect shape and has been opened to inspect contents or will come in non-retail packaging (brown/white box or white/clear bag). Miter guide allows for easy miter cuts from 0 to 45 degrees
• Locking rip guide sets up along the front and rear scales for added precision
• Powerful induction motor powers through ceramic, porcelain and stone tile
• 7 in. continuous-rim diamond cutting wheel offers precision cutting and prevents chipping
• Cutting table tilts for precise 22.5 and 45 bevel cuts

Product description

The PORTER-CABLE PCC780LA 20V MAX* 7" Sliding Table Top Wet Tile Saw features a sliding table that delivers 17 in. of best-in-class on-table cutting capacity, allowing users to cut 12 in. X 12 in. tile from corner to corner. The 20V MAX* battery power lets users set up this saw directly in the work space. The cordless power offers users the ability to move around the jobsite cord free. An onboard miter square to help line up miter cuts and repeatable rip cuts. It also has a roll cage for easy carrying and protection of the cutting cart. The splash guard keeps water from spraying the user, and a water container keeps work space cleaner than most other saws in the category for quick and easy cleanup. This unit offers a battery charge indicator which shows the user the remaining battery life per charge - simply remove the drain plug over a bucket to quickly drain water without a mess. Backed by PORTER-CABLE'S 3 year limited . Includes: PCC780 20V MAX* 7 in. Wet Tile Saw, PCC685L 20V MAX* 4. 0Ah Battery, PCC699L Charger, 7 in. Porcelain Tile Blade, Miter Square, Blade Wrench.

• Sliding table delivers 17 in. Of best-in-class on-table cutting capacity, allowing users to cut 12 in. X 12 in. Tile from corner to corner
• 20V max* battery power lets users set up this saw directly in the work space
• Cordless power offers users the ability to move around the jobsite cord free
• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart

User questions & answers

Question:	Is it possible to cut tile 32 inch
Answer:	They come with the table top.
Question:	Is this only for tile? Or can you use it like a normal table saw
Answer:	Yes. The top is quite heavy and attaches firmly to the Bora Centipede base at six points. If the ground surface is too uneven, the feet of the base may wobble but the seam at the hinge of the worktop that you are asking about will be perfectly flat. I’m really happy with my purchase of the Bora table top.
Question:	does this accept Dewalt 20v platform
Answer:	We have them at VMTW
Question:	Will it cut natural stone and if so, what’s the maximum thickness
Answer:	Hello, The CK22T table top is made of MDF. If you have additional questions, or would like to discuss this further, please feel free to contact us via email at [email protected], or call us at 866-588-0395. Thank you!

Product description

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

• Portability: Compact size for ease of transportation and storage
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
• Power: 15 Amp, 5800 rpm motor
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Guaranteed tough: Metal roll cage ensures job site durability

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	We do not recommend modifications on our tools as they are designed to work as is. If you are meaning plugging it in to a 8 outlet powers strip: that is not recommended. This unit should be plug into a direct outlet of using the appropriate extension cord ( VOLTS, LENGTH and WIRE GAUGE)
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	Laid down flat - 27 1/2" wide, 46" long (you can take about 3" off this by using the shorter handle length slots), 25" high with rail on (21 1/2" with it off). You can stand it up or lay it down - either works.
Question:	Does this saw accept dado blade set
Answer:	Yes, you will need the Dado Throat Plate which is DeWalt Part Number DWE7402D1. Per DeWalt, do not attempt to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter. Since dado cuts are not thru-cuts, the cuts must be performed with the blade guard assembly removed. To remove the blade guard assembly, pull riving knife/blade guard release lever and pull up on the guard or riving knife to remove. When using the dado, the special dado insert (also sold as an accessory) must be used.
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	It's a great saw. It has some safety features that I love. If you have a limited budget I would recommend that you stave for a couple of days and buy this saw. It is bulky and it's gonna cost you a little over $600 out the door but it's worth it. Remember when buying tools try to buy the best you can find. You don't want a cheap tool to stop working in the middle of the day.

Product description

The DW715 12 in. Single-Bevel Compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

• Power and durability: 15 amp, 4,000 Rpm motor
• Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
• Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
• Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
• Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
• Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

Remember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.

• 2.5 amp motor rotates the blade up to 2500 feet per minute
• Create cuts up to 3-1/2 inches deep and 9 inches wide
• Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
• Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
• Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty

User questions & answers

Question:	What are the table dimensions
Answer:	The table is 12" by 12".
Question:	Can this cut schedule 40 stainless steel 304L pipes
Answer:	I wouldn't, the cuts wouldn't be that great and you would burn out the motor on the saw
Question:	will saw make sharp turns
Answer:	If you install a smaller blade it will turn almost as sharply as a scroll saw. I have a 1/4" blade and it can turn perhaps a 3/4" radius OK.
Question:	Do i need to purchase saw blades
Answer:	The saw ships with one wood blade. I purchased an extra finer tooth blade and a metal cutting blade. good to have an extra in case the one you are using breaks.

Product description

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Variable speed goes from 400 to 1600 strokes per minute
• Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

User questions & answers

Question:	Is the pinless adapter upgraded in this model
Answer:	Yes
Question:	What’s the difference between this and the
Answer:	The difference is toolless or tooled blade changes. That's the only difference I found in the 2 units.
Question:	What blades are you all using
Answer:	I use spiral blades which, unlike regular flat blades, you can cut by pushing and pulling your piece being cut.
Question:	I am new to scroll saws so have to ask. Is it worth the $40 difference in price for the 3921 over the 3920 and why
Answer:	this model(3921) replaces the 3920, they added a few features and the pinless clamps to the mix. the price difference is for the design changes and the extra pieces they add. 3921 is better than the 3920 when you count in the extra features.
Question:	does it come with sand paper
Answer:	Ours didn't. But just cut a full sheet in half and half again. Love how well it works.
Question:	is it ok to use on an old desk? I am concerned about the circar pattern of this sander, I won't be able to follow the grain of the wood
Answer:	It's a small orbit, about 1/16", like a vibration. For $30 give it a try. If you use fine paper on the last pass and move the sander in the directionof the grain, should be ok. I think it's agreat little tool.
Question:	What about the cutted sections in the sandpaper
Answer:	Hi, Put the sandpaper section on the sander. The sander came with a black square item that has spikes. Push the sander over the spikes and the holes in the sandpaper will appear. Also the holes are only needed if you want to collect the dust in the bag. I do not use the collection bag.
Question:	Where do I find refills online for the 1/4 sheet
Answer:	What is "Full Sized Sheet"? , I see 8 1/2 x 11 and 8 x 10.

Product features

BLACK+DECKER BDEQS300 1/4-Sheet Orbital Sander

The BLACK+DECKER BDEQS300 1/4-sheet orbital sander is ideal for finish sanding and detail work around the house. This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal. This sander offers high-performance dust collection to provide a clean work surface.

Versatile

This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal.

Convenient

This sander features paddle switch activation for easy on/off during application.

Ergonomic

With a compact size and ergonomic design, this sander can get into tight spaces and maximizes user control.

Efficient

Ideal for detail work and finish sanding, this sander also offers high-performance dust collection to provide a clean work surface.

Beveling Table

The spacious table features a 16-inch depth for cutting large workpieces and bevels up to 45 degrees to the left.

Blade Variety

Whether your preference is pinned or pinless blades, the WEN 16-inch Variable Speed Scroll Saw handles them both.

Variable Speed

Variable speed can be adjusted anywhere from 550 to 1600 strokes per minute with the simple turn of a knob.

Flexible Worklight

The flexible worm work light can be adjusted and moved to illuminate workpieces of any shape and size.

• 【Powerful Motor】15A 2000W pure copper motor can generate 4800RPM cutting power to rip through various materials such as wood, hardboard, plywood, blockboard and chipboard
• 【45ºBevel Cutting】 Bevel tilt angle handle allows a left bevel cutting from 0-45°. Max cut depth is 2-4/5'' at 90°and 2'' at 45°. The table saw is equipped with 10'' 24T carbide-tipped blade for wood and compatible with most of the 10'' blades
• 【Aluminum Extension Tabletop】 Aluminum table surface features excellent antioxidant and anti-deformation, coated to reduce friction for more smooth sliding. The dimension of tabletop is 25.3''x 28.3'' and extension length is up to 3.9'' on both sides, providing more stability when cutting long wood
• 【Miter Gauge & Rip Fence】 Cross cutting requires the use of the miter gauge to position and guide the work. Miter angle can be adjusted from -45°to +45°according to your demand. Rip fence helps you make stable and accurate cuts, max rip capacity is 16.5 in.(42cm) in the left and 12.6 in.(32cm) in the right
• 【More Convenient Design】 On-board storage provides easy access to push stick and Allen wrench for extra convenience. Transparent blade guard ensures a clear vision and forbids careless touching hurt. 2-1/4" dust collection port can be connected with vacuum cleaner for more effective dust cleaning

User questions & answers

Question:	Where is this product manufactured
Answer:	It is made in China.
Question:	Now that you have had a chance to use the saw, would you buy it again
Answer:	It is cheaper than we thought. Also the stand that came with it didn’t fit the saw. Because we needed to use it we wired it on to an old saw stand. I guess you get what you pay for.
Question:	What are the square plastic things for? I dont see them in the instructions, and nd were just sitting in the box. Kind of looks like a holder for the
Answer:	The instructions are really not helpful at all. They do not match any of the parts labels stamped on the parts
Question:	Will blade included for this table saw
Answer:	Sorry, the blades will not included in the package.

Product features

TACKLIFE TABLE SAW 10-Inch 15A, 31 - 1/2'' RIP CAPACITY, 45ºBEVEL CUTTING, ALUMINUM EXTENSION TABLE

• 15A motor is more powerful compared with regular table saws, very suitable for cutting hardwood materials
• 31 - 1/2'' Rip capacity allow cutting a variety of large materials
• Aluminum table extendable on both sides, 25 -1/3'' x 28 -1/3'' aluminum table extends to 25 -1/3'' x 36 - 1/5''
• Max cut depth is 2-4/5'' at 90°and 2'' at 45°
• Miter Gauge & Rip Fence provide variety and more precise cutting
• Dust cleaning efficiently by connecting with aspirator that has 1-3/8-inch

Aluminum Extension Table

Aluminum table coated could reduce friction for more smooth sliding

The arms do extend to allow for a 3.9'' on both sides

About Rip Fence

31 - 1/2'' Rip capacity allow for cut large sheet materials to size

The blade can reach 4800 RPM

About Miter Gauge

Cross cutting requires the use of the miter gauge to position and guide the work

Miter angle can be adjusted from -45°to +45°according to your demand

About On-Board Storage

Provides easy access to push stick and Allen wrench for extra convenience.

A respect Management on your workbench

About Collection System

It features an excellent dust port and collection system

It minimize the amount of cleanup that you have to do

About Excellent Stability

Solid iron stand enhances stability.

Triangle support feet prevents table from tilting when cutting

Product description

For the more experienced user who needs a powerful circular saw with advanced features, the SKIL 5280 7-1/4 inch circular saw is the saw for the job. The 15-Amp motor has the power and performance you need to quickly cut lumber and sheet goods for a room addition, deck and more. The single-beam laser guides cuts with increased accuracy, while the integrated dust blower keeps the line of cut sawdust free. The 51 degree bevel, with positive stop at 45 degrees, gives a variety of cut options, while blades changes are easier with spindle lock and on-tool wrench.

• Powerful 15-amp motor delivers 5,300-RPM for greater speed and faster cuts
• 7-1/4-inch carbide-tipped blade included. Spindle lock for easy blade changes.
• 51 degree bevel capacity for a wide variety of cuts. Arbor size: 5/8 inches, cord length: 6 feet
• Lightweight 6.95-pounds design reduces fatigue
• Dust blower keeps line-of-cut free of sawdust for improved visibility. Anti-snag lower guard reduces snags when making narrow cut-offs

User questions & answers

Question:	I am building a panel saw and need a circular saw with an auto on switch. Does this saw have that ability
Answer:	use the switch at the power plug and zip tie it the trigger.
Question:	What is the wattage
Answer:	With an AC motor you can't calculate the wattage by multiplying the voltage by the current (amperage). I won't get into a technical explanation but the peaks in the AC current are delayed from the peaks in the AC voltage. The wattage is equal to the volts X amps X a power factor, which is always less than one. That said, the wattage is really only of interest with respect to how much electricity your're billed for. You need to consider the current to determine whether you are overloading your wiring. The 15 amp specification would be when it reaches it's maximum load. I haven't measured this saw but my 15-amp rated table saw draws 8 amps with no load. I don't really have the means to measure it safely at full load.
Question:	Can the laser be adjusted by the user if it doesn't line up out of the box
Answer:	There is an adjuster toward the back of the laser- a 3/32 allen key can adjust it left or right. Mine moved a bit, probably from the vibration of the saw. I was able to easily adjust it back to straight.
Question:	Does this cut accurately? I bought a cheaper Skil and the cut was off by 1/4" at the base. The laser was off the same too
Answer:	I made some straight cuts in 2" x 4" s and the laser was right on.

Product features

Single Beam Laser

Use laser to guide straight cuts.

Indicator Light

Know when the saw is powered on.

Dust Blower

Keeps line of cut free of sawdust for accurate cuts.

Guarded Trigger

Minimizes accidental start up.

More About This Product

• Includes a 24-tooth carbide blade and carrying bag.
• 15 Amps, 5,300 RPM
• Depth of cut at 2-3/8 in.
• 51 degree bevel with positive stops at 45 degrees.
• Spindle lock for easy blade changes using the on-tool wrench.

Product description

PORTER-CABLE PCE980 7 in. Table Top Wet Tile Saw features a powerful 1.0 Horsepower motor providing smooth cutting of porcelain, ceramic and Stone tiles. Cast-metal cutting cart delivers 17 in. Cutting capacity, allowing cutting of 12 in. X 12 in. Tile on a Diagonal. Get accuracy of 1/16 in. On cuts up to 12 in. Long. The Pce980 includes Pce980 7 in. Wet tile saw, 7 in. Porcelain tile blade, Miter square, blade wrench. Includes 3 year limited warranty, 1 year free service contract, and 90 day money back guarantee.

• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart
• Splash guard keeps water from spraying the tool operator
• Stainless steel fixed deck holds up to water and jobsite abuse
• Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm

User questions & answers

Question:	how thick will this cut
Answer:	I would say 1:4, if you are cutting porcelain that thick take it slow, natural stone will cut easier. I highly recommend this saw, I use it for small jobs, it’s really great in tight spaces. In my opinion it’s the better of the smaller wet saws as I prefer a rolling table for more accurate cuts. I however use an MK on my bigger jobs and large format tile and stone and it’s a beast with no limitations but cost about 10x what this saw cost. I do a lot of baths and kitchens and I love it!
Question:	Alway problems substituting other brand blades - and can't find PC replacement blades - can anyone confirm good to excellent substitute
Answer:	I've tried several after market blades with this saw. The problem I've experienced is the original PC blade produces a slightly wider cut, allowing the tile to get past the guard support in the back. The blades I've tried produce a thinner cut that prevent the tile from passing around the guard support. I'll try the Pearl P4 7 inch to see if it works, although 50$ is a gamble I'd rather not bet on.
Question:	Can this saw cut glass tiles
Answer:	It can cut glass but without buying a blade specifically for glass tiles you might be disappointed. Every tile installer I know has several different blades always on hand for the abundance of materials thrown at him. Glass Master is a good glass blade and manual cutters often do excellent. With the stock blade you will get some chipping along the cut. Which could be polished out with extra effort. If you can handle chipping go for it.
Question:	Does this saw do miter cuts? Can you angle the blade, or the table
Answer:	Yes, this table saw does simple mitre cuts. The blade is fixed. The table is fixed (does not angle for a compound mitre cut). The product is positioned on the (right) cutting cart that feeds the tile to the blade. The saw comes with a miter square for basic angle cuts.