14 best hybrid table saws

• Motor: 2 HP, 115V/230V (prewired 115V), single-phase, 16A/8A
• Rip capacity: 31-1/2" right, 11-3/8" left of blade
• Max depth of cut at 90 degrees: 3-1/8"
• Max depth of cut at 45 degrees: 2-1/8"
• Table Size: 40-1/8" x 27"
• Distance from front of table to center of blade: 16-1/4"
• Floor-to-table height: 34-1/4"

User questions & answers

Question:	What shop fox moblie base fits this saw
Answer:	I've run it for about 15 minutes without overheating. I don't know how long it would take to cool down? When I first used it, it smelled hot; this was apparently just because it was new and oil film on the cutter head.
Question:	Whats the base of saws measurements
Answer:	I didn't know until you asked but I grabbed some from a package I just got and it shredded just fine, do I probably wouldn't do it all the time but yes it can.
Question:	Where can i get the circuit breaker part # x1888224x to convert the motor to 230v
Answer:	Sounds like perhaps an overload issue. Please contact manufacturer direct for tech support (800) 327-8508

Product description

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity.

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

User questions & answers

Question:	Does it come with a fence
Answer:	I live in Palm Springs so it's warm here even in the winter; this blanket has worked fine for me even on very warm days.
Question:	How many horsepower is this table saw
Answer:	Thanks for your question! Fleece does tend to be water resistant, so this won't absorb the way, say, paper towels do. But it won't shed liquid like a plastic sheet either. We find it's a nice middle ground --- not too much absorption, not too much water-resistance. And keep in mnd that using fabric softeners or dryer sheets will make all your laundry LESS absorbent, so definitely don't use them with your Blue Zoca blanket.
Question:	Can I plug this into a regular outlet
Answer:	The blanket is 100% liquid proof. Not to be gross, but you could empty your entire bladder on this blanket and not a single drop will get through.
Question:	El producto viene desarmado o armado
Answer:	Absolutely!! First, pre-treat any stains with a non-chlorine stain remover. Then machine wash separately in cold water with your usual detergent. Because this is a premium weight blanket, we suggest running through a second spin cycle to thoroughly remove all moisture before drying. For best results, we recommend line drying (high heat will damage the Stay-Dry inner lining) but you can tumble dry on no- or very low heat setting if necessary. Stay dry!! We recommend l

Product description

For over 100 years Delta has been meeting the needs of the most exacting Craftsmen. The Delta 36-6023 Portable 10 inch contractor table saw was designed with the professional in mind. Powered by a 15 amp motor it is maximized for precision, durability, and mobility. The heavy duty one piece rail system, along with the newly designed fence system allows for precision cuts every time. The fence incorporates a special design allowing you to cut narrow pieces of stock. The saw has a large 25 inch rip capacity 3-1/2 inch depth of cut at 90 degrees and 2-1/2 inch at 45 degrees. A 2. 5 inch dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean. Cut after cut, this saw is designed for the demands of the professional user and serious craftsman and Delta backs that up with its 5-year pledge to you.

• Powerful 15 Amp Contractor Grade motor easily handles treated lumber and hardwoods
• 32. 5 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
• Durable rack and pinion fence rails make fence adjustments fast, smooth, and accurate
• Professional Grade 5-Year Warranty

User questions & answers

Question:	does this have metal gears? And is it a wormgear
Answer:	For moving the fence and putting the blade on an angle yes it does but some of the levers are really hard dense plastic
Question:	Where’s it made
Answer:	Taiwan
Question:	how high this table saw is with the stand
Answer:	The table is about 36" off the floor when it is on the stand.
Question:	Can you separate the stand from the saw
Answer:	It comes in the box separate. If you don't want to use the stand ... you could set it in/on a table.

Product features

THE ULTIMATE IN PORTABLE TABLE SAWS

HUGE RIP CAPACITY

The Delta 36-6023 houses a powerful 15 amp motor and boosts an enormous 32.5 inch rip capacity. Its 559 square inch table surface, tube steel frame and Delta patented one step folding stand provides you the stability needs for those large cuts.

THE PRECISION YOU DEMAND

The Delta 36-6023 features a rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The rails utilize 3 quick adjustment tabs that allow you to quickly relocate the fence while ensuring the blade and fence are always parallel guaranteeing consistent and true cuts.

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

From the Manufacturer

The 64B table saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence® system is available in 30? or 50? rip cut capacity. Storage hooks on the stand keep your accessories within reach.

• EXCLUSIVE ACCU-FENCE SYSTEM: Locks to rail without play for increased safety and precision.
• QUICK-RELEASE RIVING KNIFE: Maintains close blade proximity to reduce chance of kickback.
• CAST IRON TRUNNION: Ensures smooth blade positioning.
• MICRO-ADJUST MITER GAUGE: Offers wider crosscut support.
• BUILT-IN DUST PORT: Increases dust collection efficiency.

User questions & answers

Question:	what size is the blade
Answer:	the straw is inside the bottle which is connected to the tip but can be drank with out the straw but this may damage the product
Question:	I have a 27" wide doorway into my basement. Can anyone tell me if I would be able to fit the un-assembled parts into the basement for setup? Thanks
Answer:	Hi Jamie! We do not currently sell replacement parts on Amazon. You can purchase replacement straws from the manufacturer.
Question:	When the saw arrives, what voltage is it set for
Answer:	Hello Marian,I am very sorry but we sell them together with the tumbler. We do not have a separate listing for the straw or the tumbler.
Question:	what is the total length and width of this table saw. I have limited space in my shop and trying to determine the overall foot print of this unit
Answer:	Hi Catt! For a long-lasting label, we recommend using a kid-friendly craft paint pen. If you need to change your label frequently, a dry erase sticker will let you make temporary marks that can be easily removed.

Product description

The SKIL TS6307-00 10" Jobsite Table Saw has a 25-1/2” (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup.



This large coated cast aluminum tabletop saw comes equipped with a 10”, 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.

• RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
• INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
• PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
• 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
• 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
• DUST PORT ELBOW – Redirects dust to a container for easy cleanup

User questions & answers

Question:	Does it come with a blade
Answer:	Yes it comes with a blade! Not one of the best but it will get you started.
Question:	Will the saw sit flat on a work bench when legs are folded up
Answer:	Hello, Yes this saw can sit plat with the table folded up underneath. Thank you for your inquiry!
Question:	Is the miter slot a standard 3/4" size
Answer:	Yes
Question:	Why is Amazon humping the Skil router with this saw? Can you mount it from underneath and make a router table
Answer:	No. You can't attach a router to this table saw. A recommended table for the router could be the Skil RAS900 Router Table.

• Rack & Pinion Fence System Make fence adjustments fast, smooth and accurate
• 32-1/2" Rip capacity easily cuts a variety of larger shelving and trim materials
• 2-1/2-Inch Dust Collection Port easily connects to a vacuum for efficient dust extraction
• Can be used with DWE7490 and DWE7491 versions
• Allows for use of stacked dado cutters
• For woodworking and building

User questions & answers

Question:	Can you plug this saw into a 240V outlet
Answer:	No, this is amazing! The material of this beach blanket is light and thin, and it is comfortable to lie on it.
Question:	What is the Max cutting depth of this saw, will it handle 4x4's
Answer:	I'd be more than happy to answer your question. Package with Waterproof beach blanket,4 durable ABS anchors stakes, 1* Carabiner； 1 * CARRY BAG. The carry bag is 5.12*8.6 inch, it is small and lightweight. You can buckle it on the shoulder strap of beach bag or sports backpack. It is very convenient and practical for those who go on vacation in summer.
Question:	is blade included
Answer:	This beach blanket is ultra-light and ultra-thin, will not make you sweat, will not stick to your body, this is a very good beach mat.
Question:	I want to build a crosscut sled. What is the distance from the front of the blade to the end of the T-rail in front
Answer:	nylon，Non-toxic

Product features

DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity

The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set up and breakdown with excellent stability.

• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Rolling stand designed for easy set up and breakdown with excellent stability
• Telescoping fence rails retract to create a small, portable package
• Flip over ripping fence allows for narrow rip cuts
• 15 amp Motor quickly rips through hardwoods with ease
• 2-1/2" Dust Collection Port easily connects to a vacuum for efficient dust extraction
• 3-1/8" depth-of-cut at 90 and 2-1/4" at 45
• 21-7/8" X 26 - 3/8" table provides superior material support

DWE7402DI Dado Throatplate

• The DWE7402DI Dado Throatplate for 10 in. Portable Table Saw allows use of stacked dado cutters.
• Allows for use of stacked dado cutters

Product description

Customize your table by adding this Professional Cast Iron Table Saw from RIDGID. Provides a flat, level surface for trouble-free cutting.

• 13 Amp motor delivers up to 3450 RPM
• Cast iron table minimizes vibration
• Front and back-clamping aluminum rip fence has extra-large glides to provide precise and smooth adjustments along the rail
• Built-in accessory slots for installing auxiliary fences that support large work pieces
• Not eligible for LSA

User questions & answers

Question:	Can I use a dado set on this saw
Answer:	Our UrbanEco Outdoors printing beach blanket will remain cool under normal temperature, however, if you place it directly in the sun on a scorching day, it will absorb heat, under this condition, it will be advisable to place towels on top.
Question:	Does this saw come with the extension I see in the pictures
Answer:	Our UrbanEco Outdoors lightweight blanket beach mat weighs only a mere 0.95lb, including the integrated storage sack, 6 stakes and stakes pouch, making it very portable and lightweight. It is very easy to carry around, as there is a compression strap, which you can carry with your hand or hang to a carabineer on your bag. You will love how travel-friendly this blanket is!
Question:	What coupling device would you need to connect dust port to a collection system
Answer:	Yes it is very easy to stuff the giant light weight beach blanket into its integrated pouch. Just insert it ! There are also attached compression straps on the bag to squeeze the blanket into a tiny, compact bundle.
Question:	is this saw belt driven or direct drive
Answer:	Hi, our UrbanEco Outdoors extra large beach picnic blankets are machine washable! Use cold water to wash the beach blanket , picnic mat or camping blanket , then hang dry!

Product description

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick-release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts.

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

User questions & answers

Question:	does this have a sliding table
Answer:	The fence slides the table itself is a mobile table that’s attached to the saw.
Question:	What is the horsepower rating of the motor
Answer:	It has a 1 3/4 horsepower motor
Question:	Does this have a left hand tilt
Answer:	Yes the blade tilts to the left for your angle cuts.
Question:	How many horsepower
Answer:	It has 1 3/4 HP, 1 Ph, 60 Hz and it is 120 V, 14.8 A, with a output of 4000 RPM.

Product description

Bring some of the Gold standard home to your workshop with the Powermatic PM1000 Cabinet Table Saw. The PM1000 is the first Powermatic cabinet table saw that is wired for 115V usage. This table saw runs off a 1-3/4HP motor with a poly-v belt that reduces vibration and maximizes motor efficiency. Not to mention its superior dust collection power. Feel at ease when it comes to accuracy with Powermatic's exclusive 30" Accu-Fence system that gives you the work space and stability that you need.

• EFFICIENCY: A blade surround and collection hose provide an unobstructed path, maximizing dust collection.
• SIMPLICITY: Arbor lock allows for one-handed blade changes, with minimal tools.
• COMFORT: Ergonomically-designed 7” handwheels provide momentum (making blade height and bevel adjustments easy).
• STURDY: Precision-ground cast iron work surface features a beveled edge for smoother operation.
• SAFETY: Tool-less guard assembly with independent side leaves is easy to use, maximizing safety.

User questions & answers

Question:	can i mount a cast iron extension table for my router on the left side? I dont see any holes
Answer:	Hey Jeffery.I looked under the table and what I see is that the table itself is an "egg crate" casting to give the table strength with relative weight savings. The edge of the table (left side) has been cast flat, or parallel, with the outside vertical surface i.e. it's not tapered. That is good news for you because it can be drilled. The flat surface on the inside will allow for a washer and nut to hold in place without slipping. The question of router table weight is the concern. If it were mine I would provide a support leg under the attached table, either plumbed vertical or diagonal back toward the base of the saw. good luck.
Question:	Does the tablesaw come in one box? If not how many boxes and the respective dimensions please
Answer:	It comes in several boxes stacked on a pallet. The wooden pallet is approximately 3.5 ft by 3.5 ft and it is stacked 4 ft tall. It is all wrapped together on the pallet with plastic wrap. The truck driver moves it around using a pallet jack.
Question:	Are the trunnions cabinet mounted or table mounted
Answer:	They do mount to the cabinet frame, but they actually look a lot like the table mounted trunnion brackets. They're an improvement from table mounted trunions, but are not the large industrial yoke style brackets that span from corner to corner of the cabinet that many of us associate with the term "cabinet mounted trunnions". Instead, they bolt to front and rear frame struts...very similar to the Jet Proshop system. You can view the exploded parts pictorial in the manual to get a better idea of the trunnion system.
Question:	So which would be the best saw to buy: (other than cost) the pm1000 or the 64b? and why? i'm having a tough time deciding
Answer:	I looked at the same comparison and chose the PM1000. Reasons: (1) Mass. The PM1000 weighs significantly more, and thus will have less vibration/undesired movement during use. (2) Trunnion mounting is reportedly more secure in PM1000 vs 64B. (3) Switch. The magnetic on/off switch of the PM1000 is much more readily accessed with a knee or a blind reach with a hand while keeping eyes on the work. (4) Dust collection. Appears to be much better with PM1000, as long as one has a decent dust collection plan/system. (5) Assembly. (Unsure about this one.) I’ve been told there’s much more assembly to be done with 64B than with PM1000.

Product features

PM1000, 30" RIP with Accu-Fence System, 1.75 HP, 1PH

Evolution represents a process that is never fully complete. For a woodworker, inspirations evolve as life experiences shape our creativity. Skills evolve as we share tips and techniques with friends and mentors. And our workshops evolve as we refine our skills. At Powermatic, we're proud to introduce the latest example of our own evolution, the PM1000 cabinet table saw. As with every product Powermatic builds, the PM1000 redefines the limits of design, innovation and durability.

Product description

• Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
• Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado – 13/16” | Arbor size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Rolling stand designed for easy set up and breakdown with excellent stability
• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	Can't see why not. Look online for Garmin-compatible charts, whether from Garmin or not. (My hiking map, with contours and more trails than the USGS maps, was a free download! Look around.) The eTrex models are waterproof, which is a plus. Think seriously about the display size, though. The whole unit fits in the palm of your hand, and its display is only a couple inches high. (See the specs. I might be off a little.) We hikers and hunters can stop and consult the unit, then start walking again. Your boat might travel quite a distance while you peer at that tiny screen, even with the engine stopped. Just a thought.Garmin obviously had boaters in mind when they programmed this, regardless of its size. It even has a "Man Overboard" function that instantly records its current location, then displays the distance and direction back to there while you turn the boat around. It shows tides, too, at whatever tide stations are close to you. Bottom line: it will do everything you need (I think) and do it all day and on into the next morning on a pair of AA cells, but your eyes will ask you why you didn't buy something with a bigger screen.
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	The maps that come preloaded are: Worldwide DEM Basemap (NR), Digital Globe demo (Jnx) and USGS Quads - Grand Canyon National Park (Jnx). Unfortunately, you will have to get the topo maps separately.
Question:	Does this saw accept dado blade set
Answer:	yes on the compass (electronic) but turn on the WAAS depending on if you set the compass for a true north or magnetic north WAAS gets rid of the errors jumping from satellite to satellite
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	The Oregon and all the Garmin "state" models all have a touch screen, don't they? The eTrex series doesn't. For controls it has the Power/battery check button and "back button on the right, and on the left, the zoom-in and -out buttons, plus the Menu button. On the front, at top-right, is the main control, a little thumbstick. Use it for scrolling and selecting menu items and for moving the map beyond your location.You'll want to spend some time reading the manual; this thing has a LOT of functionality. Most important shortcut: no matter how deep you go in the menus, double-tapping the Menu button takes you back to the main screen, with Map highlighted.

Product features

10" Jobsite Table Saw 32 - 1/2" (82.5cm) Rip Capacity, and a Rolling Stand

The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set up and breakdown with excellent stability.

• Material support, can be used for narrow rip cuts
• Onboard storage system provides easy access to the Blade Guard Assembly, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap when not in use
• Telescoping fence rails retract to create a small, portable package
• 15 amp Motor quickly rips through hardwoods with ease

Features

• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials
• Rolling stand designed for easy set up and breakdown with excellent stability
• Flip over ripping fence allows for narrow rip cuts
• 2-1/2" Dust Collection Port easily connects to a vacuum for efficient dust extraction
• 21-7/8" X 26 - 3/8" table provides superior material support

Product description

1792010K Rout-R-Lift: Without Rout-R-Lift Features: -Table saw with 50'' accu-fence system.-PM2000.-Available with or without Rout-R-Lift. Specifications: -5HP 1PH. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 39'' H x 37'' W x 85'' D.

The award winning Powermatic 1792010K PM2000 Five-Horsepower, One-Phase Table Saw with Accu-Fence System sets a new standard for innovation with an array of patented features and massive body design. Years of input from woodworkers helped focus the features that make the PM2000 the new standard by which cabinet saws are judged.

Advanced Trunnion Mechanism

Though Powermatic's trunnion mechanism has long been regarded as the best in the industry, their designers further refined it. The rigid, box-style cast-iron construction, high-end bearings, and conical-shaped worm gear drive with increased contact area combine with the smooth, solid feel of the tilt and height adjustments. Also, the adjustable backlash means that users can easily adjust the mechanism back to factory-fresh clearances and feel.

Easy Adjustments and Mobility

Two oversize eight-inch-diameter cast-iron handwheels, each with a large spinner handle, make blade height and bevel adjustments almost effortless, while a quick-release riving knife greatly reduces binding/kickback risk. Also, a built-in, retractable-caster system (patent pending) provides immediate mobility, and a push-button arbor lock (patent pending) ensures rapid blade changes.

Durable Construction and Vibration-Free Performance

The PM2000 is built to last. Fabricated from heavy-gauge steel, its cabinet is fitted to a huge cast-iron base (the heaviest in its class) that provides exceptional stability and virtually eliminates vibration. Additionally, the full-length 5/8-inch-diameter arbor is precision-machined from stress-proof steel to exceptionally high tolerances for accuracy.

The specially designed arbor threads eliminate the dip between them and the shaft that can allow thin dado chippers to hang out of alignment with the rest of the stack. To keep operation quieter and smoother, a poly-V drive-belt system transfers power from the motor to the arbor with virtually no vibration and less heat build-up.

Tackles the Big Jobs

Large workpieces are no problem thanks to the 22- x 30-1/2-inch, primary cast-iron table surface, which expands to 42 inches long. All cast-iron surfaces are finely ground to ensure a smooth, mar-free work surface that provides more support for big jobs. And a front- and rear-edge bevel prevents catching of the miter gauge on the table edge.

Also, the push-button arbor lock is accessible from above the tabletop, eliminating the need for dual arbor wrenches.

Power and Precision

The PM2000 has a five-horsepower, one-phase motor controlled by a newly designed magnetic on/off switch that allows disabling of the machine when not in use, and protects against accidental start-ups caused by power fluctuations.

This machine also comes equipped with an industrial-duty Accu-Fence system for accurate cuts, and a heavy-duty, deluxe micro-adjust miter gauge with aluminum-extruded 13-inch extension fence for dependable workpiece support and fine angle adjustments.

Dust Collection

For a healthier, cleaner work environment, a dust shroud encloses much of the blade below the table, and a quick-release hose connects the shroud to a standard four-inch-diameter port on the rear of the cabinet.

The PM2000 is backed by a five-year warranty.

What's in the Box

One PM2000 Table Saw; one table insert; one miter gauge assembly; one blade-guard assembly; one switch in box; one push stick; one 27-millimeter arbor wrench; two lock knobs; two swivel handles; one riving knife and pawl assembly; two hinge pins; one side cover; fence and rail system parts; one owner's manual; and one warranty card.

• Quick release riving knife greatly reduces binding/kickback risk
• Built-in retractable caster system (patent pending) for immediate shop mobility

User questions & answers

Question:	love the looks and quality of this saw by the description. but see nothing as far as the diameter blade it comes with
Answer:	It is not gray but a very muted, light sage color. I suppose someone could see gray, if they do not understand what gray is. If I put gray next to this, it is light, muted green. It is not a solid but very small sage/cream checkers. Very tiny. From a distance it looks like a solid.
Question:	Does this saw include the two cast iron extension wings
Answer:	Dear Customer, thanks for your question, I have to say the pizza throw blanket is not quite thick, microfiber fabric is soft and high density, this makes blanket still warm and lightweight , hope my answer can help you
Question:	What size blades does this table saw take
Answer:	Kids loved it!

Product description

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity.

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

Product description

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick-release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts.

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

User questions & answers

Question:	What size blade is used with this saw
Answer:	10"
Question:	Can you use thin kerf blades with this saw? What is the thickness of the riving knives
Answer:	Thin kerf blades can be used. The riving knife may need to be removed. The thickness of the riving knife is .125 inches.
Question:	does this saw come with a mobile base
Answer:	No. I bought that separately.
Question:	What are the dimensions at the bottom of the stand? I am trying to figure out if the non adjustable mobile base from my old saw will work
Answer:	The main table dimensions (L x W) are 20 x 27 in. You will have to estimate the bottom of the stand.

Product description

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 32.5" D x 27" L x 13" H | Product Weight: 94 lb
• Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
• Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down
• Protection: Smart guard system contains riving knife and Anti Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Soft start circuitry: Manages the intensity of motor start up and minimizes the possibility of tripping a circuit breaker

User questions & answers

Question:	will this connect to the festool 27mm dust collector
Answer:	Don't know that item, but the exhaust/dust port on the Bosch mikes out @ 2.50" OD and 2.25" ID; so, w 27 mm close to 1.06"...likely not And FYI, bought the official Bosch dust collection bag which does a poor job...I use my VacMaster hose- the outer nozzle plugs snugly into the Bosch port's ID and picks up 80-90 % of the wood dust generated...as long as I remember to turn the vacuum on..which I sometimes don't ...love this table saw
Question:	Can a dado blade be used in this saw
Answer:	Yes, the 4100XC-10 table saw can dado cut by using TS1007 dado insert. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	is this saw equipped with the Reaxx system
Answer:	No
Question:	how tall is this saw/stand when folded / stored
Answer:	The table height from floor is 32.5". Its dimension is 27in x 32.5in x 13in. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

Features

• Powerful table saw – has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• SquareLock rip fence – engineered for enhanced clamping and trueness
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Onboard storage – allows for access to all included components