14 best metal cutter

Product description

Crescent Wises has taken the aviation snip to the next level with the advanced metal Master aviation snips. The precision cast molybdenum blades have conk ground Serrations which allow for more uniform Serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free float design. The spring action design allows for fast, effortless feed. The all new latch design provides ergonomic single handed operation for left or right handed users. New extended non slip handle grips give users better control while cutting. The new generation of Crescent Wises metal Master will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional aviation snips. They are available in left/straight cut, Right/straight cut, and straight cut.

From the Manufacturer

Wiss compound action snip with serrated blades to grab hold and aggressively cut through material, compound action to multiply the hand's force by five times and a self-opening spring action for a smooth low effort feed. The industry standard - the professional’s choice.

• Cuts straight and slight curves with yellow handles for quick identification
• Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring action for fast, effortless feed

User questions & answers

Question:	Would these be good for cutting the rusted metal off of autos, or should I be looking for a different type/angled cutters
Answer:	Did not really understand the question. This cutter works nicely and I am happy I bought it. Don't know anything about 3 piece or made USA.
Question:	Dear Seller!! Wiss M3R, It's includes 3 piece and made USA?! let me know, please! Thanks
Answer:	The packaging in the image appears to indicate that it'll cut 18-gauge.
Question:	Will this shear able to cut precious metal sheets up to 20 gauges and thinner?? I am a jeweler designer and using saw is pain in the neck and time con
Answer:	These snips will cut a penny. Hold the coin with a pair of slip-joint pliers as it has a tendency to twist. That made things much easier.
Question:	will this cut a penny in half
Answer:	this is only tightener, both ends of straps are getting in, this tool is making need tension between both ends. It is not cutting, it is not binding at all. For binding you need clamps and clamping tool.

Product features

Next Generation Aviation Snips

Snips made to earn the trust of a new generation. Continuous improvement means never being satisfied. That’s why these new Next Generation snips last 60% longer and require 20% less force to cut on average compared to our snips from just five years ago.

• Precision cast molybdenum blades with CNC-ground edges and serrations for cutting low carbon, cold-rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single-handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring-action for fast, effortless feed
• Handles have built-in stops providing consistent operation and blade opening
• Ergonomic, single material non-slip handle grips provide excellent control and easy cleaning with built-in hang hole for convenient storage
• Designed, Engineered, and Manufactured in the USA

Product description

This WORKPRO bolt Cutter is featured with molybdenum steel jaws, compound cutting action requires less effort. Bi-material soft handle for comfortable cutting.

• Note: cutting locks is not recommended
• Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long life. Ergonomic bi-material Anti-slip grips provide greater control and comfort in cutting
• Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effort
• Cutting Capacity: HRC≤42: 7/32-inch(5mm Maximum)；HRC<25: 1/4-inch(6mm Maximum)
• Ideal for cutting soft metal, bolts, rods, rivets and chain

User questions & answers

Question:	What size workpro bolt cutter would be right for an 8mm bolt? will the 24" cutter work? would like to hear from the seller, if possible
Answer:	Get the biggest one you can handle the small ones don't have enough leverage.
Question:	Roofing nails protruding through sheathing in garage attic. Can I use this bolt cutter to snip them off
Answer:	Bolt cutters won't work--you CAN NOT cut them off flush and it will look crummy. I had the same problem with roof nails protruding into my attic by a poor roofing job--looked like a porcupine. I cut the nails flush with 14" "hoof nippers" made by Diamond Tool and Horseshoe in Minnesota. You will need 14" inch for the leverage. They work great!--but they are kinda spendy... but will last a lifetime.
Question:	Will these cut a large(14/0) fishing hook
Answer:	It can cut the wire with diameter of 3/16-inch, could you compare with your fishing hook? If your hook is thicker than 3/16-inch, it's hard to cut.
Question:	What size would be best for cutting bike locks, say 15 per night, for months
Answer:	The best option would be a 14-in size bolt cutter. Just large enough to cut a large lock but not so heavy that you can't run fast when holding it. Great question

Product features

WORKPRO W017004A 14-Inch Bolt Cutter

Using the WORKPRO 14-inch bolt cutter to cut bolts,rods, wires, rivets and chains up to 3/16 inch wide.

Product description

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

• Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
• Attack up to 20 gauge stainless steel and 18 gauge sheet metal
• Lightweight design limits fatigue during operation
• Utilizes a powerful 4-amp motor, curling the metal as it cuts
• Swiveling head rotates a full 360 degrees to meet the needs of any project

User questions & answers

Question:	Will it cut the plastic on a truck truck bedliner
Answer:	I found it cuts vinyl soffit with no trouble, neat, efficient and quick. I think they are similar.
Question:	will this cut the alum side panels on enclosed trailer
Answer:	Easily, I've used it on 1/8th thick T6 alum without any issues.
Question:	Does it come with a case
Answer:	Mine did not come with a case.
Question:	How well will this cut 29 gauge galvalume rib steel roof panel? i see the spec for 18 gauge metal
Answer:	I cut 28 gauge steel with it with no problem 29 gauge is thiner yet ( smaller the # thicker the steel ).

Product features

Shear Metal. Sheer Power.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

360-Degree Swivel Head

Pivot the head 360° to help accommodate comfortable cuts from any angle or direction.

Cut up to 18-Gauge Metal

The powerful 4-amp motor slices through 18-gauge sheet metal and 20-gauge stainless steel.

Variable Speed Operation

The pressure-sensitive trigger varies the strokes per minute from 0 to 2500 SPM depending on the pressure applied.

Double Cut Design

The double-cut blade configuration creates a 1/4-inch ribbon of curled metal during operation.

Lightweight Design

The lightweight ergonomic design weighs in at a mere 4.7 pounds, limiting fatigue during operation.

3-Inch Turning Radius

Cut circles with radiuses of 3 inches and up to help take on projects with a lot of turns and curves.

Product description

Next time you have a tough chain link, barbed wire, or some other thick material, just reach for the GreatNeck BC24 24 Inch Bolt Cutters. In addition to those examples, this cutter can chomp through most soft to medium metals, nails, and bolts. For an easy and comfortable grip, it features ergonomic vinyl grips. For a long-lasting effect, these cutters have a hardened cutting edge. It’s crafted from forged steel construction for the most powerful cutting capabilities. GreatNeck has for over a century has provided products with high quality and innovation. These bolt cutters are a must-have for any tool collection. To make sure you’re not caught off-guard with an unexpected repair, have this GreatNeck bolt cutter on hand. If something happens to your GreatNeck tool during common, everyday use, there’s no need to worry. This product is backed up with the GreatNeck Limited Lifetime . SPECIFICATIONS - 24” long - 5/16” open capacity - Forged steel construction

From the Manufacturer

Bolt Cutter, measures 24 inches, weighs 6-1/2 pounds, and cuts in the center, is ruggedly built from forged steel, and is excellent for cutting concrete rods, medium tensile and soft bolts, rods, rivets, bars, cables, and has a versatile short cutting edge to accommodate chain links, and features hold-firm vinyl grips.

• MAXIMUM CUTTING POWER: This bolt cutter features forged S2 steel construction for the best cutting power
• CUT THROUGH ALMOST ANYTHING: When you have to cut through something tough, all you need is this GreatNeck cutter. This tool can cut through chain link, barbed wire, nails, bolts, and most soft-to-medium metals
• COMPOUND-ACTION JAW: This effective jaw structure has a 5/16” open capacity, so it’s flexible for your project or repair
• WARRANTY PROTECTION: If something happens to your folding bolt cutters during daily, common use, then there’s no need to stress. This product is covered by the GreatNeck Limited Lifetime warranty
• COMFORTABLE GRIP: its ergonomic vinyl grips provide control and comfort while you’re working

User questions & answers

Question:	Will the 8 inch size cut standard chain link fence
Answer:	No it does not fold up. The only part that moves is the part you set the tablet on. The base is solid and does not move.
Question:	Will this cut open a sportneer lock
Answer:	I've had my stand for awhile. I use it constantly and from moving it around on the counter, the rubber pads eventually slid off. I thought the other pads were replacements, but when I went to put them on, I found they are sticky on both sides. There's also a rectangular piece included and it's sticky on both sides. They're pretty useless for me.
Question:	Can this cut a basic lock
Answer:	Not sure don’t have
Question:	are there instruction for how to adjust the tension using the nut/bolts on the bolt cutter
Answer:	Again, works on any 'touch screen'

Product features

GreatNeck BC24 24 Inch Bolt Cutters

Our Bolt Cutters are built for strength and crisp cutting control. The 24 Inch Bolt Cutter is manufactured with a short cutting edge to cut through the toughest chain link. The jaws of steel cut through wire, nails, bolts, barb wire and most soft to medium metals. The comfortable ergonomic handles help you maintain control and keep a firm grip.

• Hardened cutting edge stays sharp and ensures long life of the tool
• Jaws are made with heat-treated forged high chrome vanadium steel for precise cutting
• Jaws have a 5/16 Inch (open capacity)
• Powder coded tubular steel handle with ergonomic shaped rubber grips for comfort
• Compound action jaw function for more strength

Product description

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

• Able to cut up to 18GA material
• 360 degree swivel head for maneuverability
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills
• Able to cut up to 18GA material
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills

User questions & answers

Question:	Does this tool work on Bosch portable drills and impact drivers
Answer:	DWASHRIR works with most 18V-20V impact driver and drill tool brands.
Question:	Will it fit Bostitch
Answer:	Connects via standard 1/4-inch hex shank Compatible with most 18V-20V impact driver and drills
Question:	Can it cut through angle iron, and a garage door track
Answer:	Itsmat the most it will cut is 18 gauge sheet metal
Question:	Will it fit on a makita impact drill
Answer:	Well It just happens that I am using the shears with one of the many Makita impact drivers but it wasn't without a little preparation. The clamping mechanism off the arm has the two pins that insert into retaining holes on the drill body, but mine did not have them so I simply bore a hole on each side in places that the pins could go. It took me about 5 minutes. Now it fits fine and works very well.

Product features

DWASHRIR Impact Ready Shears Attachment

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand.

Product description

Cutting sheet metals will never be the same with REXBETI ultimate nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.





Features:

Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

Versatile cutting accessories for ROUND and STRAIGHT cutting

Double cutting heads adjust 360 degree for easy cutting in any space

Different cutting shapes available

Best cutting result without any burrs at the cutting edges

No distortion of material

Cuts any shape to 12 mm radius

Extra nibbler die and punch

Safe to touch, easy to work with

Powered by a Hand Drill - no additional power source needed



Maximum cutting capacities:

- iron/steel plate 1.8mm

- stainless steel plate 1.2mm

- copper/aluminium plate 2mm

- plastic/fibreglass board 2mm



Package included:

1 * metal sheet nibbler cutter

1 * Plastic handle

1 * Cutting round accessories

1 * Extra nibbler cutter die

1 * Nibbler cutter punch

1 * Wrench

1 * Iron tool box

1 * User manual



Notice:

To get the best cutting results, please work it on a corded drill with high RPM ( 1500 - 3000 )

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
• REXBETI versatile sheet metal nibbler, perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

User questions & answers

Question:	Need more cutter rods and heads
Answer:	no
Question:	Does this perform better on an impact or drill
Answer:	i ran it on a 20 volt dewalt drill. worked great but i believe itl work hard and wear fast on heavy material regardless of drill or impact. 29 gauge OK but 24 gauge not so much.
Question:	How long does the blade last? Are there replacement parts
Answer:	This is double blade and there is extra blade inside the tool box. so there are 4 blade for you. It will last a very long time for you.
Question:	Has anyone tried on a metal door frame? Might be useful for cutting in door access hardware
Answer:	good cutting on 1.5 mm steel sheet.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch.

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles.

It will be a big time saver for cutting sheet metal.

• ★【Powerful Angle Grinder】6A motor with 750W max output power, no-load speed of 12000RPM for tough grinding jobs, works more efficiently while cutting, grinding and sanding various materials, such as metal, tile, stone, and wood etc
• ★【More Convenient Operation】Spindle lock for quicker and easier discs & accessories changing, trigger lock-on for comfortable & continuous operation. Auxiliary handles are installed on the left and right sides, for maximum ease to control and cut
• ★【Upgrad Handle】Ergonomic design, with left-mounted slide safety On/Off switch. Removable and forward-canted side handle for greater control and comfort for both right-handed and left-handed users. Small size grip for reduced fatigue
• ★【Safety Protection and Durable】During operation, the protective cover prevents sparks and metal chips during use and protects you from injury. This angle grinder is coated to protect the tool from abrasive debris
• ★【Wide Range of Uses】Widely used for metal rust cleaning, metal cutting, metal grinding, tile cutting, tile grinding, wood cutting and wood grinding

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

From the Manufacturer

The compact bolt cutters have lever action center cutters to cut material such as bolts, nail and rivets up to 5.2 mm. The lever action designed mechanism provides a lever ratio with low friction. This results in a cutting performance 20 times higher than the hand force applied. Required 61% less effort. The cutting edges are induction hardened at approximately 64 HRC to cut through soft wire up to 6.0 mm; medium hard wire maximum 5.2 mm; hard wire up to 4.0 mm and piano wire up to a maximum diameter 3.6 mm.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	will this cut through 16 gauge wire fencing
Answer:	You mean Kennel Fencing. The jaws of this product are designed and hardened to cut through metal fencing of which 16 gauge wire is the standard garden fencing. According to the manufactures ads and countless videos and myself included, they seem very happy to cut through 16 gauge wire - effortlessly and without destruction of the jaws cutting edge.
Question:	Can these be used to cut through aluminum alloy sheets? 7075-T
Answer:	Yes,I believe they will,the drawback would be very short cut strokes,the knipes are a very effiecent tool for cutting single strand wires of varying sizes..
Question:	Can this cut the standard shackle of a padlock? What is the maximum cutting diameter
Answer:	I think you would damage the cutting surface trying to cut a padlock. I am not sure what the maximum cutting diameter is
Question:	Who makes this tool
Answer:	Knipex of Germany. Outstanding little cutter. They make a lot of quality hand tools.

Product features

Knipex 71 01 200 8-inch CoBolt Compact Bolt Cutter

An all-around tool for the toughest demands, this Knipex high-leverage CoBolt cutter features a lever action design that applies 20 times more hand force for superior cutting power with less effort. This mini bolt cutter can cut through more than you ever thought possible — up to 1/4-inch diameter with ease. It's ideal for automotive or construction applications, cutting cotter pins and nails, repeated use in factory assembly lines, cutting wire fencing in agricultural settings, or even everyday tasks such as cutting floral wire or fish hooks.

Forged from chrome vanadium electric steel, these cutters are built to last. This lightweight cutter features precision-matched cutting edges for cutting soft or hard steel.It also features gripping jaws below the joint for gripping and pulling nails and wires.

Quality in Every Detail

Sometimes we give our pliers a really hard time. We try to destroy them to find out what makes them good and long lasting. Because we don't want to leave anything to chance, we take a long, careful look.

The steel Knipex uses is precisely hardened with a maximum of 0.8% carbon and defined parts of chromium and vanadium, guaranteeing optimum cutting performance and service life — even though it requires special production and costs a bit more. But our high product demands require this.

Knipex also looks closely at the small details. The angles, the sharpness, the hardness, the toughness of the cutting edges. The precision and smooth movement of the joint. The handle design and the finish. We keep reviewing these subjects, we research, we test, and we improve our pliers.

Exceptional Cutting Performance With Minimal Effort

Easy Cutting Of Any Wire Up To 1/4-inch

Precision, Induction Hardened Cutting Edges

Gripping Jaws For Gripping And Pulling Nails And Wires

Product description

Sheet metal snips are designed to cut various thicknesses of stainless and cold-rolled steel. Offset blade models help keep material away from hands while cutting. All models feature an auto-release mechanism for fast one-handed operation. Large handle rings and double dipped grips on the Tin Snips are designed for more comfortable use. Snip models include: offset long-nose, duckbill, 3-piece aviation set, offset left-cut, offset right-cut, straight-cut, right-cut aviation, left-cut aviation, straight-cut aviation, and 10-inch and 12-inch tin snips.

• CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel.
• EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation
• DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws).
• 1/4-inch blade markings for quick precise cuts
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Are these serrated - Leaving a serration on the metal
Answer:	No, the CMHT73756 are not serrated.
Question:	Are these stainless steel
Answer:	I think so, but not sure.
Question:	How do i warranty these cutters
Answer:	Amazon would handle the warranty on this unit. You can also contact CRAFTSMAN Customer Service at 1-888-331-4569 for further assistance.
Question:	Will this cut through 14 guage galvanized mesh wire
Answer:	Yep it will. The blades don’t open as wide as most do so it isn’t the best for longer metal cuts.

• Hurricane 02-024 10 Inch Aviation Tin Snips, Straight Cut
• Material: Chrome Vanadium Steel, Serrated edge blades with sanding finish
• Handle: Bi-color handle with rubberized grip for comfort and control
• Safety: Locking latch prevents damage to cutting edge when stored, Cuts up to 1/16"(1.8mm) cold-rolled steel sheet
• Yellow Straight Cut

User questions & answers

Question:	Will they cut 0.1mm spring steel
Answer:	You can use it for 0.1mm spring steel
Question:	Do you think these will cut carpet
Answer:	I bought it to cut tin, very short cut length and not a straight line, curves on the end. I wouldn’t recommend for carpet
Question:	Would this cut imagitarium 10-gallon terrarium screen
Answer:	It would 100% be able to cut screen. Super easily. I've used it to cut wire coat hangers, fencing, trees of heaven stems that were over one inch thick (so the lantern flies can't eat them), all sorts of things. Definitely would work for screen. Not sure about being able to cut through the edges that hold it together though.
Question:	Do you think they can be used to cope emt conduit
Answer:	How thick is the conduit? I don't think they could handle it, but I feel like I saw my neighbor use a hacksaw.

Product features

Hurricane 10 Inches Aviation Tin Snips Set, Straight

Hurricane 10 Inches Aviation Tin Snips Set, Straight, for Steel, Aluminum, Leather, Copper. lets you make cuts from any angle; it's the right solution for getting at hard-to-reach angles and tight spaces. Cuts through many types of metal very smoothly,is ideal for completing a cutting job with ease and precision for any job.

Hurricane 10 Inch Aviation Tin Snips, Straight Cut

10-Inch Aviation Tin Snips

Material: CRV serrated edge blades with sanding finish;

Handle: Bi-color handle with rubberized grip for comfort and control;

Safety: Locking latch prevents damage to cutting edge when stored,

Cutting Figures: Cuts up to: Cold-Rolled Steel Sheet 15 Gauge, Carbon Steel 18 Gauge, Stainless Steel 22 Gauge, Copper 17 Gauge, Aluminum 16 Gauge;

Cutting code: Yellow Straight Cut

TryeGrip Series Handle

Ergonomic Non-Slip Soft Grip Handle

Durable Cutting Edge

Premium Alloy Steel Serrated edge blades with sanding finish;

Cutting Figures: Cuts up to: Cold-Rolled Steel Sheet 15 Gauge, Carbon Steel 18 Gauge, Stainless Steel 22 Gauge, Copper 17 Gauge, Aluminum 16 Gauge;

Cutting code: Yellow straight cut

Safety Locking Latch

Locking latch prevents damage to cutting edge when stored,

Product description

As a manufacturer of manual tools, MFIROZ Tools focuses on producing high quality, professional-grade tools that can provide excellent performance. This is an indispensable tool in cutting work.

We commit ourselves to provide the best Tin snips for all our dear customers forever and ever! No more hesitation! Try it now!

Advantage

1. Ergonomic grips with slip guards to protect knuckles & fingers.

2. With its high-leverage compound cutting design, the metal snips offers exceptional force.

3. Bilateral serrations can distribute cutting forces across the jaws, thereby improving cutting quality and tool life.

4. The superior design prevents tears at the end of cuts by controlling blade bypass and minimizes folding and burrs.

5. Our metal cutting shears tool comes with some oil to work more smooth and protect the tool.

Product Details

Product Name: Tin snips

Color: Black and yellow

Size: 10IN*3IN

Material: Carbon steel

weight: 12.5 Ounces

Package included: 1 x Aviation tin snips

Cutting specifications: Cold-rolled sheet0.06IN, stainless steel0.04IN

Warm Tips

1. Please do not directly touch the blade part with your hand.

2. Do not use in cutting high hardness materials etc.

• 【High Quality Material】 The metal scissors are made of premium chrome vanadium steel processed with a high-frequency heat treatment. The high-tensile strength steel tool efficiently converts manual pressure into impressive cutting power.
• 【Ergonomic Design】 Metal shears dynamically conforms with the motion of the user's hand like a good fitting pair of gloves. The non-absorbent material has a soft touch and feel without being tacky. Non-slip ribs are spaced to prevent palm or finger slippage.
• 【Wide Use】 MDIROZ wire snips are ideal for cutting metal sheets, it also can be used to cut various hard materials like aluminum, plastic plates, vinyl siding, cardboards, wire mesh, copper, leather, rubber and so on.
• 【Safe & High Efficiency】 The metal safety lock is between the strong handles. It's easy to open and close for convenient security system. Serrated cutting edges prevent materials from slipping during use. It's safe and easy to do metalworking!
• 【Perfect After-sales Service】 If for any reason you decide not to like it, you will get a full refund. We always put custome's requires to the first place. Your advice make us progress and your happy is our greatest power.

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
• Easy operation

User questions & answers

Question:	Can I use it to cut perfect circles on sheet metal
Answer:	Yes. it's magic!
Question:	Where can i get the replacement blade
Answer:	A replacement came with the tool. I haven't used it enough to replace the original yet. I don't think you would have any problem getting a replacement from the manufacturer.
Question:	What diametee can you cur with the rod provided
Answer:	If you mean what thickness of the material, that will vary with the type of material but in mild steel I think you can handle about 0.060 inches without any problem. If you mean how small a circle you could cut, well, the cutter rod is only about 1/8" in diameter so minimum might be 1/4" diameter?
Question:	will it cut 1/2 X 1 inch welded wire
Answer:	It will work great if the wire will go in the cutter. I don't know the gauge of the wire you are trying to cit. The cutter will cut 16ga, and thinner.

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles. It will be a big time saver for cutting sheet metal

Product description

The Hakko CHP-170 cutter is an excellent general use tool.

• Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
• 21-degree
• 2.5mm heat-treated carbon steel construction provides durability and long life
• Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
• Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance

User questions & answers

Question:	Will this work for cutting a jump rope wire? item in question: http://www.amazon.com/jump-rope-training-crossfit-adjustable/dp/b00lgxe5ns/ref=sr_1_1?i
Answer:	If the jump rope has a "wire" rope(metal cable) you need a special pair of pliers. I use Falco wire rope cutters for cutting safety cable at work. They're not very expensive and you won't ruin a good pair of side cutters in the process
Question:	Are these small enough to cut kanthal wire on a rda
Answer:	Thats exactly why i bought these, on recommendation from my friend. In my opinion they are perfect! Mine were great quality made in Italy. And they cut super close to your posts! Ive cut single strand 30 awg up to 3 strand twist 26 awg. If I get another one it will be another one of these!
Question:	I see some questions/answers on beading/jewelry questions. I am looking to use these cutters on 20 to 26 gauge jewelry wire. Thoughts and thank you
Answer:	Jewelry wire comes in several alloys.These cutters are for soft-alloy wires, as copper or tin.Steel wire will dull the blades quickly.Concorde
Question:	I need to cut chicken wire. Should I get this pair or a heavy duty pair
Answer:	NO! These are not for cutting steel wire (which is what I think chicken wire is made of). Most cheap big diagonal cutters are most appropriate.

Product features

QUALITY POLICY

We continually strive to put a smile on our customers’ faces by interacting with integrity and seeking the truth with courage as we constantly improve to meet their expectations

EXPERIENCE

For over 60 years, Hakko has been producing superior quality soldering and desoldering tools, hot air rework stations, smoke and fume extraction systems, technical training classes, and a wide assortment of accessories and related equipment for the electronics, industrial and hobby industries.

PEOPLE'S CHOICE

When people are asked why they use Hakko equipment, the answers are nearly always the same: “reliability”, “best value” and “excellent service.”

Product description

Compact and ergonomic design for one-hand operation. Perfect for cutting in small spaces or over head. High performance motor for better cutting efficiency versatile tool for cutting metal, tile and plastic materials

• 3" Cutting disc, compact for one hand operation.
• Includes 3 cutting discs and 1 grinding disc
• 19000 RPM
• Versatile cutting tool - power to cut metal, tile, thin concrete and plastic
• Part of 20V power share family. Share batteries, save money!

User questions & answers

Question:	Will this tool cut 1/2 in. thick porcelain tile
Answer:	11 pounds
Question:	Can it cut a granite countertop
Answer:	Sorry! I never saw it out of the box or assembled.
Question:	Will this tool cut a 1/2 in thick porcelain tile dry
Answer:	Great question. I don’t know.
Question:	Will this tool cut motor shafts
Answer:	Oh no! I would contact Amazon!

Product features

Small yet powerful

The WORX WX801L Mini-Cutter powers through tough jobs, like cutting through a metal; tile; concrete or plastic, like a pro with the 20V battery and 19,000 RPMS performance. When you are just by yourself and have to get things done, this is just the perfect tool for you. Its compact and lightweight, weighing about 2.4 lbs. and fits into one had easily. But, it packs a punch.

Made with embedded safety features

As the tool constantly performs tough jobs there is always a chance of such power tools heating up and thus affecting their performance. However, with the safety features of the Mini-Cutter like Metal grinding guard and the Plastic cutting guard, you do not have to worry about the life and performance of the tool. The Metal grinding guard can stand temperature as high as 1000 degrees whereas, the Plastic cutting guard can handle temperature up to 205 degrees.