14 best battery circular saws

Product description

The DEWALT DCS570B 7-1/4" (184mm) 20V cordless Circular saw with brake (baretool) features a Brushless motor that provides 5200 RPM and maintains speed under load. It uses a 7-1/4" blade, that provides 2-9/16" depth of cut, with a bevel capacity of 57 degrees. This Circ saw offers up to 100 cross cuts in pine. This is a baretool item - battery sold separately. Specs: top handle, 5200 RPM, Brushless motor, depth of cut at 45° is 1-5/8 inches, depth of cut at 90° is 2-9/16 inches, 2 bevel stops, rear pivot, Electric brake, MAX watts out is 900 watts. Includes: 1) 7-1/4" (184mm) Circular saw, 1) 7-1/4" (184mm) blade, 1) blade changing wrench.

• Power - Brushless motor provides 5200 RPM and maintains speed under load
• Runtime: 100 cross cuts in a 2x4 (Pine)
• Capacity: 7-1/4 inch blade provides 2-9/16 inch depth of cut
• Ease of Use: Bevel capacity up to 57 degrees
• Battery and Charger Sold Separately
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	does it come with battery & charger
Answer:	Let me see what the headline is that we all read ... DEWALT DCS391B 20-Volt MAX Li-Ion Circular Saw, Tool Only. Well ........... I guess it is just the saw (because it saws tool only) or .... it comes with 50 chargers and 300 batteries. YOU decide.
Question:	Which hard case is sold to protect and store this saw
Answer:	I threw out all my Dewalt hard cases many years ago. The tools just barely fit and all 15-20 cases looked the same and served no purpose.
Question:	I have this saw and need to cut a 6ft piece of Caesarstone. Is there a blade that would work with this saw to cut my stone
Answer:	It definately will do a good job. 5" mason blade. I wouldn't do it daily if it's your job but a bathroom or 2 is fine. I've done 5 bathroom jobs and work with wood daily. Use fhis little guy a lot from ripping siding to decking to studs. Still works great. I use a bigger corded worm drive for roofs and tearing into sub floor. Also 4 of the bathroom jobs were 1/2" rock and 1 was 1/4". I did probably 30 bathrooms with my 18v. It was a drag when the nicads would run down. Hope that helps.
Question:	Will the De Walt batteries 20V Max lithium ion 1.5 ah and charger i have for my drill set work with this
Answer:	If you're going to use it a lot in a work session, you should get a 5.0 amp-hour battery or two. But they're pricey. A kit with two 5.0 AH batteries plus a beefy charger to fast-charge a 5.0 can set you back more than $200. Just don't expect a lot of cuts out of a small 1.5 AH battery. I have an new DeWalt 20v impact driver that came with two 2.0 AH batteries, and they last a long time. By the time I've used up one battery, the other has completely recharged (~30 minutes). But don't expect 30 minutes of saw use on a 2.0. If you want to use it a bunch, my advice is to get at least one 5.0 AH. (Note batteries are described both in volts and in amp-hours. If you get a 20v tool, you must stick with 20v batteries. But the capacity of the battery is measured in amp-hours, or Ah. The answer posted in 2013 incorrectly referred to them as 1.5v, 2.0v, 3.0v, and 4.0v. They meant Ah, not v.

Product description

This Brushless 4-1/2 in. Cordless circular saw (tool only) comes with one blade, rip fence, and dust port adaptor. The DCS571 features a bevel gear design allowing users to cut 2x material at 90 degrees and 1x material at 45 degrees. With convenient on-board blade key storage users can change blades with minimal hassle. Elongated handle optimizes reach for rip cutting OSB and plywood. Using a DCB205 battery, you can cut up to 339 linear feet of 3/4 in. Osb.

• Brushless motor allows you to cut up to 339 linear feet of 3/4 in. Osb using DCB205 battery (sold separately)
• Removable auxiliary handle for increased control
• Hang hook for increased convenience
• On-board blade key storage for hassle free blade changes
• 1-1/2 in. Finger trigger allows users to choke-up on tool if necessary for their application

User questions & answers

Question:	how many rpm is this
Answer:	4500 RPM
Question:	Where is it made? Thanks
Answer:	Don't know never looked . Been a builder all my life have every tool and just about every dewalt 20v 60 v. Works well good design for a small saw.
Question:	What's the part number for a compatible dust bag
Answer:	A dust port is included to connect to a vacuum. The port part number is N594300
Question:	What are the blade specs? We know its 4.5" but what is the center hole size
Answer:	3/8 arbor

Product description

Look no further than the Ryobi P505 for your household woodcutting needs. Its cordless power will let you take this all over your property for demolition projects or diy construction needs. At 4,700 revolutions per minute, it boasts power similar to corded circular saws, but with the portability of a cordless one. Along with this portability is a collection of features that make it easy to handle in different environments. It has a rubber grip over the handles that increases friction between your hands and the tool for maximum control. It also features an extra handle on the left side of the unit, giving you more control and visibility over your work. Beyond that, to cut wherever you need around the house, you can adjust the angle of the bevel up to 50 degrees. With a 5 1/2" blade included, you’ll be ready to go straight out of the box if you have a Ryobi battery in your collection beforehand. If you want to switch the blade out, an onboard compartment holds a wrench so you can make quick changes on the fly without having to spend time looking for tools. Whether you’re a diy builder, homeowner, or professional looking for a reliable backup, the P505 from Ryobi will serve you well.

• GRIPZONE OVERMOLD: The handles of this power tool are lined with a rubber mold. This increases friction between your hands and the tool, improving handling in most conditions
• TRANSPARENT LOWER GUARD: The polyurethane blade guard is clear, so you can get maximum visibility on your work while you make your cuts
• ADJUSTABLE BEVEL: You can adjust the foot of this cordless circular saw up to 50 degrees to cut at a variety of angles for different applications
• EXTRA SIDE HANDLE gives you improved control. Its location on the left side of the tool gives you greater visibility over your cuts while you work
• ONE+ COMPATIBLE: The circular saw works with Ryobi’s 18 Volt batteries. These battery models include the P100, P102, P103, P104, P105, P107, and P108 (Batteries not included)

User questions & answers

Question:	Will it make a clean cut on a 2x
Answer:	Yes. I use mine all the time and cut 2x4 and 2x6.
Question:	Will this work with a One+ 18v battery
Answer:	Yes, quite well actually . All my ryobi chordless tools run off of them . Cut all the lumber for my remote deer shack without ever recharging during a full day
Question:	Will it work with older Ni-MH 18V Rioby battery? I have an older driver with charger and 2 batteries but they are not Lithium
Answer:	I can only offer my opinion... if it is 18v and fits in the tools the same as the lithium it should work. The fact that it's ni-cad vs lithium should not make a difference
Question:	Does this include the battery and charger
Answer:	No, it does not include the charger or battery. This is a listing for a bare tool, it includes the blade and owners manual. Thank you.

Product description

The Black & Decker BDCCS20B 20v Max 5-1/2 Circular Saw Bare Tool is designed with a powerful high torque motor. This saw features a tool free Depth of Cut and an easy to use bevel adjustment which allows for accurate angled cuts. An included 5-1/2 blade provides smooth and fast cutting ideal for tough, everyday jobs. The compact design is great for ease of use. This tool works with the entire Black & Decker 20v Max system. Tool only - battery sold separately. Included Components: BDCCS20 Circular Saw

• High torque motor 5-1/2-Inch. fast cutting blade for a variety of cuts
• Tool-free depth of cut allows for easy depth adjustments
• Bevel adjustment with detents at 45 and 90 degrees
• Compact design for ease of use
• Works with the entire BLACK+DECKER 20V MAX System (Battery and charger sold separately)
• Circular Saw features high torque motor
• Tool Free Depth of Cut and Bevel djustment
• Compact design for ease of use

User questions & answers

Question:	I have a 36 volt lithium Black and Decker battery and charger for my leaf blower, would this work on the 24 volt lithium B&D circular saw
Answer:	No
Question:	Is there a port where sawdust is ejected? My old saw had a port where I could attach a small shop vac hose or bag
Answer:	No, this saw is used for small projects. It really works well for cutting a few things
Question:	How do you install the circular blade on the circular saw? It just doesn ot go in easy after removing the clamp washer & bolt. Is there a trick
Answer:	The trick apparently is to start screaming that it will be returned. I've worked with circular saws for 45 years and have never had this kind of trouble. As a last resort, assuming I was doing something stupid or missing something simple, I came here to the Q&A section. First, I was reassured that I wasn't the only one with the problem. Then I resolved to try again. Finally, the blade slipped in. I don't know how or why, but at least I know it can be done. It just takes 30+ minutes of struggling.
Question:	How do you replace the blade? What is the trick? Any videos available
Answer:	Go to YouTube. Enter Black & Decker 20 volt circular saw and there's a wonderful short 2-minute instructional video. I just installed the blade to my new saw effortlessly after watching this excellent instructional short and sweet video!

Product description

Brushless motor delivers maximum tool and battery life40% more power and 30X more run-time than brushed sawsCompatible with all M18 batteries

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	Does this saw have a arbor lock for changing blades
Answer:	Love it. My hair is dark brown has always had a red highlight( low-light, whatever). I have a few grays. Just wanted a change up. My husband didn't notice and wondered when I was going to use it. Sorry no pix. Definitely color is Black Cherry like a "Bing" not the "Maraschino" . I'm buying again will post. Lasted 5 months.
Question:	Hi all, can anyone tell me which it's the country of origin of the product?Just to know for customs purposes. Thanks
Answer:	I have pictures, but I’m unsure what color you are referring to. I used the sapphire black.
Question:	Does it come with charger
Answer:	Yes it does, Toluene 2 is also ppd. I am allergic to ppd and my doc gave me a hand out that shows all the names ppd goes by and that is one of them
Question:	I have the fuel cordless drill, does this circular saw use the same lithiom battery
Answer:	I just tried a Schwarzkopf Keratin. I have been using the other until now. I prefer the Keratin, it doesn't seem to leave my hair dry. It has a good strong color, and seems to be healthier for my hair. I would say the Keratin is better, at least for my hair. I am prone to dry, brittle hair, and live in a dry climate.

• 🔥Limited Promotion🔥 🎁Ideal Gifts for your Family🎁
• ⚒ 【BATTERY REPLACEABLE】The Battery of this Cordless Circular Saw is compatible with all TECCPO and POPOMAN batteries. If you need to order a new 4.0Ah battery,you can search ASIN:B08CZ9W71Y.
• ➤[ POWERFUL 20V BATTERY & CHARGER ] - The battery of this Circular Saw is compatible to all POPOMAN & TECCPO 20V cordless tools. The large capacity 20V 4.0Ah Lithium-Ion battery with power indicator keeps the circular saw running continuously. One-Hour Fast Charger helps charge anytime at anywhere. Cordless Design can offer you biggest convenience to work both indoors or outdoors.
• ➤[ 4,300 RPM SPEED & ADJUSTABLE CUTTING DEPTH] - High performance 20V motor runs at 4, 300 RPM No Load Speed for faster cuts of wood, bamboo plywood, solid wood panel, pvc tube with ease. The Adjustable Depth knob allows cutting depth up to 2-1/16"(52mm) at 90°, cutting depth up to 1-3/8"(35mm) at 45°. 0-45° Bevel capacity allows bevel cuts for multiple applications. Equipped with 2pcs 24T TCT Blades (6-1/2”) for wood cuts. Spindle lock is easy to change the blade with a hex wrench.
• ➤[ LASER ADJUSTABLE & PARALLEL GUIDE ] - The laser is adjustable to meet all your requirements for cutting accuracy. The laser ensures a professional and precise cutting line. The parallel guide enables exact cuts along a work piece edge and cutting strips of the same dimension; Support large panels can improve the stability of this compact saw in cutting process.
• ➤[ SAFETY & ERGONOMIC DESIGN ] - The overheat protection can protect the motor. Double safety switch and blade guard mostly reduce accidents in operation. Optimized ergonomic grip provides less fatigue to one-hand operation. Tool-free adjustment system makes base plate adjustment easier and faster. Dust extraction outlet can connect with a vacuum ensures a clean working environment.
• ➤【PACKAGE & QUALITY PROMISE】- The box includes: 1 × POPOMAN Cordless Circular Saw; 1 × 20V 4.0Ah Lithium-ion battery; One-Hour Fast Charger; 2 ×24T Carbide-tipped Blade(6-1/2”) ; 1 × Parallel guide; 1 × Allen key and 1 × User Manual. POPOMAN offers 2-years satisfaction Quality Promise. If you have any questions,we will always be here to help you.

Product description

The BLACK+DECKER 20V Max* Cordless Circular Saw works with the entire BLACK+DECKER 20V MAX* system. The compact design is great for ease of use, ideal for tough, everyday jobs. Use high torque motor and 5-½ in. fast cutting blade for a variety of cuts. The 12T Carbide blade allows for fast cutting in a variety of applications and materials. A tool-free depth of cut allows for easy depth adjustments. Bevel adjustment with detents at 45 and 90 degrees. Backed by BLACK+DECKER 2-year limited warranty. Includes: Circular saw, 20V MAX* Lithium battery and charger.

• PORTABLE POWER TOOL: Compact cordless design for ease of use, BLACK+DECKER 20V Max* Cordless Circular Saw
• ONE BATTERY POWERS ALL: Power a range of BLACK+DECKER power tools, vacuums, and lawn and garden equipment using the same interchangeable batteries and chargers in the 20V MAX* POWERCONNECT Battery System
• THE POWER YOU NEED TO GET THE JOB DONE: High torque motor and 5-½ in. fast cutting blade for a variety of cuts. 12T Carbide blade allows for fast cutting in a variety of applications and materials
• EASY TO ADJUST: A tool-free depth of cut allows for easy depth adjustments. Bevel adjustment with detents at 45 and 90 degrees
• BLACK+DECKER 2-YEAR LIMITED WARRANTY: This product is backed by a 2-year limited warranty against defects in material and/or workmanship

User questions & answers

Question:	Can this be used to cut pasture fence boards
Answer:	It will brighten it but if you have a touch of red in your hair it will highlight it more. That’s what it did to mine.
Question:	Where can you purchase a blade
Answer:	I was not completely satisfied with this shade as it turned more yellow than rise color. But eventually being out in the sun pulled that yellow look out of my hair.
Question:	will it cut 2x4s
Answer:	Schwarzkopf brand Keratin Color products do not contain p-phenylenediamine.
Question:	Can this saw make bevel cuts
Answer:	My hair is naturally light brown. This color turns my hair a medium red. I love the color, but it is no where near caramel blonde.

Product description

The Makita 18V LXT Lithium-Ion cordless 6-1/2" Circular saw delivers cordless cutting power to the job site. The XSS02Z (Tool only) has a Makita-built high-torque motor and a compact design for a range of cutting applications, and will cut 2x material at 45 degrees. The Makita-built high torque motor produces 3, 700 RPM for faster cutting. The heavy gauge, precision machined base is engineered for smooth, accurate cutting and added durability in harsh job site conditions.

• Makita built motor delivers 3, 700 RPM for faster cutting and ripping through wood
• Heavy gauge, precision machined base for smooth, accurate cutting and added durability
• 50 degree maximum bevel cutting capacity
• Weighs only 7.3 pounds with battery (battery not included) for reduced operator fatigue
• 6 to 1/2 inches blade delivers a 2 to 1/4 inches cutting capacity for a wide range of cutting applications

User questions & answers

Question:	Is it made in Japan
Answer:	The manufacturer's label clearly states that it is made in China. Most of my Makita tools purchased over the last five years were made in China. While I have seen a number of issues with complex products made in China (primarily reliability issues), I have not seen any such problems with Makita tools. I suspect that Makita rides herd sternly on their Chinese manufacturers.
Question:	What's the difference between this bss610z and the homedepot xss02z
Answer:	Home Depot has nothing to do with it, they just sell it. The XSS023Z is a newer version and is equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating and the BSSA610Z isn't, the XSS02Z is also a little lighter.
Question:	Does anyone know what's the black metal bar that looks like the T in the box is for? It doesn't say anything in the manual
Answer:	By inserting it into the slots in your saw you can cut straight pieces under 10" in width without marking your board. This accessory should be pictured in your owners manual.
Question:	Does it come with a battery and charger, what about the blade? and what kind of warranty
Answer:	I bought mine "bare tool" as I already had the basic starter kit: drill/driver and impact driver which comes with two batteries and the charger. It comes with a 6 1/2" blade (which are readily available at Depot or Lowes) and I think it's got a two year warranty. Used mine all day today cutting pressure treated 2x6's; never missed a beat.

Product features

Makita XSS02Z 18V LXT Lithium-Ion Cordless 6-1/2" Circular Saw, Tool Only

The Makita 18V LXT Lithium-Ion Cordless 6-1/2” Circular Saw delivers cordless cutting power to the job site. The XSS02Z (tool only) has a Makita-built high-torque motor and a compact design for a range of cutting applications, and will cut 2X material at 45 degrees. The Makita-built high torque motor produces 3,700 RPM for faster cutting. The heavy gauge, precision machined base is engineered for smooth, accurate cutting and added durability in harsh job site conditions.

It’s part of Makita’s expanding 18V Lithium-Ion series, the world’s largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

Includes:

Product description

M18 6 1/2 CIRCULAR SAW TOOL ONLY. The product is easy to use. The product is durable. Product is shipped in bulk packaging.

From the Manufacturer

When you’re performing woodcutting applications, nothing less than the best, no-nonsense saws will suffice. That’s why Milwaukee has released the 2630-20, a heavy-duty 18 volt lithium ion powerhouse that does away with the frills of consumer-grade cordless circular saws to deliver you the highest grade of power and toughness possible. It has a powerful motor, driving the included blade at up to 3,500 revolutions per minute. This motor is contained in a solid structure with magnesium guards on the top and bottom of the blade well. This will be able to survive drops and other damages commonly found on the jobsite. On top of that, a robust depth and bevel adjustment system is located onboard near the foot. You can turn it as much as 45 degrees and still affect its depth up to an inch and a half. A powerful carbide-tipped cutting blade is even included in this kit, so you’ll be able to get to work as soon as possible, assuming you have compatible M18 lithium ion batteries at your disposal. With such a powerful system, its no wonder it comes from Milwaukee.

• ELECTRONIC BRAKES will stop your blade quickly when you’re finished with your cut. You won’t need to waste time waiting around for the blade to slow down, so you can get back to work quickly
• SOFT GRIP HANDLE provides maximum comfort so you can work with precision in slippery environments
• BEVEL AND DEPTH ADJUSTMENT: You can adjust the depth up to 1 1/2" and the bevel up to 45 degrees, giving you a huge degree of versatility in your cuts
• MAGNESIUM GUARDS on the top and bottom of the blade well keep the unit protected from impacts like bumps and drops of several feet. This will allow you to work confident in the safety of your tool and yourself
• M18 COMPATIBLE: This cordless circular saw is compatible with Milwaukee M18 18 Volt Lithium Ion batteries. Compatible models include the 48-11-1860, 48-11-1850, 48-11-1828, 48-11-1815, 48-11-1840, and 48-11-1820
• Heavy-Duty Magnesium Guards for maximum durability and On-board fuel gauge displays remaining battery charge
• Ergonomic, compact and lightweight design with soft-grip handle for operator comfort

User questions & answers

Question:	does it come with a case
Answer:	All lotions are pretty much the same there was no improvement by the end of finishing it. Not that I was aware of any ways
Question:	does this include the blade
Answer:	Nothing about spf is on MY jar so I assume "No" but I love the product!
Question:	What is the maximum length you could rip into say 4x6 construction wood at maximum depth with a full charge
Answer:	Hi! Our products are manufactured in the USA, Australia, South Korea and Japan.
Question:	will battery 48-11-1840 m18 redlithium xc 4.0 work
Answer:	I like is good energizing lotion I wish I can find anywhere else

• 🔥Flash Sales🔥 🎁Perfect Gift that both men and women would love.🎁
• ▲25cm(9.5'')&BATTERY REPLACEABLE▲ Longer base plate for more stable cutting, it is efficient and stable to operate. The battery is replaceable. The Cordless Circular Saw is compatible with TECCPO and POPOMAN batteries. Can use discounts to purchase batteries together.
• ☞【Cordless Design】The mini cordless circular saw possesses a compact, well-balanced, lightweight design and powerful enough. And thanks to its small size, the saw gives you power and accuracy in tight areas that cannot be accessed by regular circular saws. vailable for more workplace. 2.0Ah battery and 2A fast charger can be charged in 1h. Recommended to use two 2.0Ah batteries(TDBP02P) alternately
• ☞【Safety One Hand Operation】Using a safe and comfortable ergonomic design. Safety trigger double insurance, improved handle helps reduce fatigue when working with one hand, and optimizes the ergonomic design to make one-handed operation easier. The safety switch design and blade guard mostly reduce accidents in operation, promises a safer cutting job. The battery is in the rear position of the machine to separate the front and rear gravity to make the cutting more stable.
• ☞【Flexibl 90° and 0-45° Bevel Cutting】The quick adjustment device makes bevel cutting faster and more convenient. Cutting depth up to 1-11/16 inches(42.9mm) at 90°; The bevel capacity at 45° is 1-3/8 inches (34.9mm). You can freely adjust the cutting angle between 0-45 °,; A parallel guide attachment ensures straight, precise cuts easily and quickly.
• ☞【Laser Guide and 2 BLADES】The laser guide ensures a professional and precise cutting line, convenient for cutting.TCT(115mm) for wood cuts/ HSS(115mm) for wood and soft metal cuts. The parallel guide enables exact cuts along a workpiece edge and cutting strips of the same dimension.The weight of the whole machine is only 4.8lb, and a reasonable weight brings good operability.
• ☘【GIFT IDEA & What you Get】It is the perfect gift for those who like to work with hands. 1 * POPOMAN-MTW80B Mini Circular Saw, 1 * TCT (115mm) Saw Blade, 1 * HSS (115mm) Saw Blade, 1 * 2.0Ah Battery, 1 * 1h Fast Charger, 1 * Parallel Guide Attachment, 1 * Elbow Dust Port, 1 * Instructions. ▲If you have any questions, you can contact our after sales staff.▲

Product features

Laser Guide

With a laser guide, you can ensure that you do professional and precise cutting without any other tools. Red light enhances visibility and more convenient to identify.

Flexibl 90° and 0-45° Bevel Cutting

Can be adjusted by buttons to achieve the depth you want.

• Cutting depth up to 1-11/16 inches(42.9mm) at 90°
• The bevel capacity at 45° is 1-3/8 inches (34.9mm).
• You can freely adjust the cutting angle between 0-45 °

One Hand Control

Can be controlled with one hand, ideal for men and women.

The improved handle helps reduce fatigue when working with one hand, increases comfort and balance, and reduces fatigue.

Product description

AIOPR 20V 4-1/2" Cordless Mini Circular Saw with Laser Guide, Rip Guide, Vacuum Adapter and 2 Blades (97630L)

Application - The Compact Circular Saw is most commonly used to cutting wood, PVC pipe, etc., but can also be used to cutting other materials with different blades.

Soft Grip Handle & Convenience - Ergonomic rubber handle improves comfort and enhances grip and control guide with just one hand at ease; With blade guard to protect the blade under no operation; Allen wrench for blade change easily; Dust extraction adapter keeps the cut line free of dust for improved visibility.

Moved Lower Guard - The fixed guard and lower guard not only protect the blades for good maintenance to extend its service life but also prevent you from being hurt by the sharp blade to assure you a safe operation.

Accurate Cutting - With laser guide and rip guide for precise cutting. Great mini circular saw that wonderful for not-big jobs, working in tight spaces, or cutting outdoor that corded saw hard to reach.



Specifications:

Voltage: 20V

No Load Speed: 3400 RPM

Max Cutting Depth:

90°: 1-11/16"

45°: 1-1/8"

Bevel Capacity: 0~45°

Blade: 24 Teeth TCT and 60 Teeth HSS

Blade Size: 4-1/2"



WHAT YOU WILL GET:

1* Mini Circular saw (with battery),

1* 24T TCT Saw Blade,

1* 60T HSS Saw Blade,

1* Allen Key,

1* Rip Guide,

1* Vacuum Adapter,

1* User Manual,

1* Charger.



WHY CHOOSE US

1. 30 years power tools OEM experience. Our parent company, a factory in China, has 30 years’ experience in cordless drill, cordless impact drill, cordless screwdriver, circular saw, hammer drill, jigsaw, reciprocating saw etc.

2.Satisfactory customer service. 7*24-hour rapid response with your message.

3.24 months limited warranty. Consumable parts are not included.

• Easy & Quick Change of Blade. The 24 teeth wood saw blade and the 60 teeth metal saw blade could be changed with the Allen key easily and quickly.
• Laser Guide & Bevel Level. The laser guide helps cut a straight line accurately. The bevel lever allows you to set cutting angle up to 45 degrees, max cutting depth is 1-11/16" (at 90°) and 1-1/8" (at 45°).
• Clean & Safe. Dust port vacuum adapter keeps cutting area clear out of wood debris; Lock-off Switch prevents the machine from accidentally starting up.
• Ergonomic Design. Soft rubber handles designs to comfortably fit in hand for improved control with minimal vibration; laser guide and rip guide for precise cutting.
• What You Get. 1* Mini Circular Saw (with Battery), 1* 24T TCT Saw Blade, 1* 60T HSS Saw Blade, 1* Charger, 1* Allen Key, 1* Rip Guide, 1* Vacuum Adapter, 1* User Manual.

Product description

The Bosch CCS180 18-Volt professional cordless lithium-ion circular saw uses 6-1/2-inch blades, and it has the capacity to cut through 2-inch thick material at 90 degrees and capacity to cut through 1-9/16-inch thick material at a 45-degree bevel. This saw has a blade-left design to allow the easiest view of cut line when saw's main handle is held in right hand. Other features include an exclusive anti-snag lower guard for easing into the work piece, a 50-degree bevel range that allows wide range of bevel applications, a spindle lock for fast and easy blade changes, and easy-to-read depth-of-cut and bevel scales. The saw has heavy-duty aluminum foot and upper guard for enhanced durability on the toughest jobsites. An electronic brake stops the blade quickly for reduced down time between repetitive cuts. Additional electronics features include Electronic Motor Protection (EMP), which protects the motor against overload and ensures a long lifetime, and the Bosch Electronic Cell Protection (ECP) system, which protects the battery (sold separately) against overload, overheating and deep discharge. Battery and charger sold separately.

From the Manufacturer

The New Bosch CCS180B Bare Tool features a more compact and lighter design than NiCd, the Fastest Cutting, and is the Only FPS-enabled pro circ saw. This model comes as a bare tool only.

• PRECISION: The Bosch CCS180B Circular Saw Bare Tool has a 6-1/2-inch saw blade capacity and provides the ability to cut through 2-inch thick material at 90 degrees and 1-9/16-inch thick material at 50 degrees.
• POWER: The cordless saw is balanced and compact with 3,900 no-load rpm and weighing only 6.6 lbs. for an outstanding power-to-weight ratio.
• CONVENIENT: Featuring a left-blade design for a clear view of cut line when saw's main handle is held in right hand. The cordless saw also provides an adjustable, easy-to-read bevel and a depth-of-cut gauge for consistent locking and improved accuracy.
• ACCURACY: The saw features the Bosch-exclusive anti-snag lower guard for easing the blade into the work piece and an electronic brake to quickly stop the blade for quick and easy use.
• DURABLE: The Bosch CCS180B Circular Saw Bare Tool was built to withstand years of the toughest jobs with a heavy-duty aluminum foot and upper guard. It also includes Bosch’s Motor and Cell protection to prevent overload and overheating.
• The 6 1/2-inch saw blade can completely cut through 2-times material even at full depth of cut
• Exclusive anti-snag lower guard for easing into the work piece

User questions & answers

Question:	Does the battery charger work on 220v electricity for use outside of the usa
Answer:	it comes with the everything you need and yes i think so
Question:	Hi all, what is " "FPS-enabled" ?? anybody
Answer:	So easy! I now highlight & color my hair at home If ness up. Hard to do! Use Dawn dishwashing soap! You won’t turn orange if you leave it on long enough. Ps. Esalon send a toning mask in their highlighting kit 👍🏼
Question:	Has anyone found a bosch bag to fit this
Answer:	It says 3 pack but i received only 1.
Question:	Is this saw brushless
Answer:	1 is one application. Pack I would think is more than one box/ application such as I bought. I got three boxes/3 applications.

Product features

CCS180B 18-Volt 6-1/2-Inch Circular Saw, Bare Tool

The Bosch CCS180B 18V 6-1/2" Circular Saw can easily cut through 2" material, and it includes a 50° bevel for added versatility. This saw powers through wood and decking, delivering professional cuts in tight areas. It has a weight of only 6.6 lbs., an anti-snag lower guard for ease of cut and an easy-to-read depth gauge. This power saw is an excellent choice for remodelers, roofers or other pros who encounter hard-to-reach places that need cuts fast.

Includes

18-Volt 6-1/2-Inch Circular Saw, Bare Tool, 6-1/2-Inch Blade

Top-of-the-line muscle

The Bosch CCS180B delivers professional-application cuts, ploughing through wood and decking with accuracy and speed. Construction pros like framers and roofers who always encounter difficult cuts in tight spaces will appreciate the power and versatility this power saw delivers. Its 6-1/2-Inch saw blade capacity provides the ability to cut through 2-Inch material at 90°, and it cuts through 1-9/16-Inch material at 50°. The improved spindle lock is designed for easy blade changes.

Versatile, maneuverable, powerful

This cordless circ saw delivers 3,900 no-load rpm, while weighing in at only 6.6 lbs. (without battery). This tool gets the job done efficiently and effectively, with an outstanding cutting-to-weight ratio. It is a more compact (12-1/2-Inch length) and lighter choice than the old NiCad design. The Bosch exclusive anti-snag lower guard allows for easing into the material. And the saw includes an electronic brake to quickly stop the blade, for less downtime between repeated cuts.

Variable bevel for quick bevel cuts

This Bosch cordless circular saw features an adjustable bevel and a depth-of-cut gauge. These two items have consistent locking and improved accuracy, which help to ensure the cordless saw's cuts are always precise. The saw has a 50° bevel, making it a smart choice when a quick bevel cut is called for in a difficult situation. Its left blade design allows for the clearest line of sight for right-handed users.

Long-lasting build

The Bosch CCS180B Circular Saw was built to withstand years of tough worksite conditions. Its depth bracket and footplate are constructed with high-strength materials, so users can count on years of easy depth adjustment. This cordless tool has Bosch's Motor and Cell Protection, which prevents overheating and overloading. This bare tool kit is a great match for pros who already have a battery and charger, both sold separately.

Product description

For the more experienced user who needs a powerful circular saw with advanced features, the SKIL 5280 7-1/4 inch circular saw is the saw for the job. The 15-Amp motor has the power and performance you need to quickly cut lumber and sheet goods for a room addition, deck and more. The single-beam laser guides cuts with increased accuracy, while the integrated dust blower keeps the line of cut sawdust free. The 51 degree bevel, with positive stop at 45 degrees, gives a variety of cut options, while blades changes are easier with spindle lock and on-tool wrench.

• Powerful 15-amp motor delivers 5,300-RPM for greater speed and faster cuts
• 7-1/4-inch carbide-tipped blade included. Spindle lock for easy blade changes.
• 51 degree bevel capacity for a wide variety of cuts. Arbor size: 5/8 inches, cord length: 6 feet
• Lightweight 6.95-pounds design reduces fatigue
• Dust blower keeps line-of-cut free of sawdust for improved visibility. Anti-snag lower guard reduces snags when making narrow cut-offs

User questions & answers

Question:	I am building a panel saw and need a circular saw with an auto on switch. Does this saw have that ability
Answer:	use the switch at the power plug and zip tie it the trigger.
Question:	What is the wattage
Answer:	With an AC motor you can't calculate the wattage by multiplying the voltage by the current (amperage). I won't get into a technical explanation but the peaks in the AC current are delayed from the peaks in the AC voltage. The wattage is equal to the volts X amps X a power factor, which is always less than one. That said, the wattage is really only of interest with respect to how much electricity your're billed for. You need to consider the current to determine whether you are overloading your wiring. The 15 amp specification would be when it reaches it's maximum load. I haven't measured this saw but my 15-amp rated table saw draws 8 amps with no load. I don't really have the means to measure it safely at full load.
Question:	Can the laser be adjusted by the user if it doesn't line up out of the box
Answer:	There is an adjuster toward the back of the laser- a 3/32 allen key can adjust it left or right. Mine moved a bit, probably from the vibration of the saw. I was able to easily adjust it back to straight.
Question:	Does this cut accurately? I bought a cheaper Skil and the cut was off by 1/4" at the base. The laser was off the same too
Answer:	I made some straight cuts in 2" x 4" s and the laser was right on.

Product features

Single Beam Laser

Use laser to guide straight cuts.

Indicator Light

Know when the saw is powered on.

Dust Blower

Keeps line of cut free of sawdust for accurate cuts.

Guarded Trigger

Minimizes accidental start up.

More About This Product

• Includes a 24-tooth carbide blade and carrying bag.
• 15 Amps, 5,300 RPM
• Depth of cut at 2-3/8 in.
• 51 degree bevel with positive stops at 45 degrees.
• Spindle lock for easy blade changes using the on-tool wrench.

Product description

This Brushless 4-1/2 in. Cordless circular saw (tool only) comes with one blade, rip fence, and dust port adaptor. The DCS571 features a bevel gear design allowing users to cut 2x material at 90 degrees and 1x material at 45 degrees. With convenient on-board blade key storage users can change blades with minimal hassle. Elongated handle optimizes reach for rip cutting OSB and plywood. Using a DCB205 battery, you can cut up to 339 linear feet of 3/4 in. Osb.

• Brushless motor allows you to cut up to 339 linear feet of 3/4 in. Osb using DCB205 battery (sold separately)
• Removable auxiliary handle for increased control
• Hang hook for increased convenience
• On-board blade key storage for hassle free blade changes
• 1-1/2 in. Finger trigger allows users to choke-up on tool if necessary for their application

User questions & answers

Question:	The photo shows a battery attached to the saw, but the text states 'battery sold separately'. Is battery included
Answer:	Yes. I don't know of any circular saw that doesn't, but this one definitely does have an arbor lock.
Question:	What is the product warranty and battery warranty on this
Answer:	china. Its where 99% of tools are made unless you spend $$$$$ on american stuff
Question:	Where's the bare tool version
Answer:	It’s the bare tool only.
Question:	charger work with 220 V
Answer:	Yes i have the same one