9 best drum sanders with tables

Product description

SuperMax Tools 71632-7F Folding Infeed/Outfeed Tables

• Folding Infeed/Outfeed Tables - SUPMX716327F
• Country of Origin:Taiwan
• Package dimensions:19.0"L x 18.5"W x 4.5"H
• Package weight:22.0 lb

User questions & answers

Question:	will these fit on a jet
Answer:	Yes, according to a reviewer, you will need to buy longer hex bolts but they work perfectly on the jet. These fold down when not in use, the jet tables do not.
Question:	is this for both ends
Answer:	Yes. There’s a folding table for each side. They’re great for longer projects
Question:	Will these fit the 25/50 supermax
Answer:	No, they are a fixed width so you’d need to order the correct size for your 25/50.

• Two pressure plates
• V-Belt drive
• Steel construction
• 18" x 44-1/2" abrasive conveyor belt
• Electronic variable-speed conveyor

User questions & answers

Question:	Does this come with the stand
Answer:	I'm not sure about the exact weight but expect to have at least two people the position it. It will also need to be lifted out of the truck with machinery for your property when delivered. Probably the heaviest piece of gear I have in my wood shop by far.
Question:	Can i sand metal with this sander? I notice there is a minimum thickness but can this be modified for thin guage metal
Answer:	Standard wrench to remove, then just slide off. Order replacement from Grizzly.com
Question:	Sanding drum uses 3 inch wide hook and loop sandpaper
Answer:	Grizzly Industrial sells replacement parts. Try the following URL: http://www.grizzly.com/products/g8749/parts Hope this helps.
Question:	What is the weight of this sander
Answer:	The owners manual shows nothing higher than 180. The flap sander has 220 grit

Product features

1-1/2 Horsepower 18" Variable-Speed Open-End Wood Drum Sander

Our 18" Variable Speed Open-End Drum Sander offers a lot of versatility and a huge sanding capacity in a small amount of floor space. Sand stock up to 36" wide and 4-1/2" thick! Unlike other open-end drum sanders, the table moves up and down instead of the head, meaning the drum support is much more rigid during sanding operations, giving you more consistent results. Add that to the precision control of the electronic variable-speed conveyor and the dual speed sanding drum, and you'll agree that this feature-packed sander is an incredible value!

Stationary Drum Headstock

Variable Speed Conveyor and Motor Overload Protection

2-12 FPM Conveyor Speed Rate

Easy Access for Sandpaper Changes

Specifications:

• Sanding motor: 1.5 HP, 120V, single-phase, 13A
• Drum surface speed: 2600 FPM and 3400 FPM
• Conveyor feed rate: variable, 0-12 FPM
• Maximum stock dimensions: 36"W x 4-1/2"H
• Minimum board length: 6"
• Minimum board thickness: 1/8"
• Sanding drum size: 4"
• Dust collection port: 4"

Product description

Remember when you used to have to sand those rounded edges by hand? With the WEN oscillating spindle sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we've sacrificed power. The WEN oscillating spindle sander features a smooth and quiet 1/2HP 3.5 amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber Drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, Table inserts and Spindle washers organized and accessible for Quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN product, Our oscillating spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM
• Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
• Attach the dust collector of your choice to the onboard dust port to minimize clean-up
• Backed by a two-year warranty

User questions & answers

Question:	How loud is it
Answer:	Not as loud as belt sander. If I was doing a lot of sanding, I would wear hearing protection. It's about 60 to 70 dbs when sanding. The belt sander is about 70 to 80 when sanding. Prolonged use : ear plugs
Question:	Did i get a lemon ? The largest sanding sleeve slides when the machine starts, and so no pressure can be applied to it. What to do
Answer:	Could be the sleeve. I tighten mine down and it works fine. I'm very happy with the one I have. I would contact the manufacturer.
Question:	what's the actually sanding height possible with this sander
Answer:	If the sanding drum in installed flush with the rubber core, the "as-designed" safe sanding height ( distance from the table top to the bottom of the drum downstroke) is 3 3/4 inches. The stroke is 1/2 inch, so it will sand a total of 4 1/4 inches if utilizing the upstroke.
Question:	Anyone find a place to put the extra washers? It's driving me nuts having, seemingly, no where to put them
Answer:	All those neat little places that are designed to hold the accessories are designed by people that don't use the equipment. All the washers, sanding sleeves, mandrills for my machine are in a box not far from the sander. Anything stored as per design would end up covered in sawdust and would have to be removed every time a vacuum or air gun is used for clean up. Cigar box (or similar) is just fine.

Product features

WEN 6510 Oscillating Spindle Sander

Remember when you had to sand those rounded workpieces by hand? With the WEN Oscillating Spindle Sander you'll simplify the daunting task of sanding down curves, arcs, contours and other odd shapes. Expect our quiet 1/2HP 3.5 Amp motor to generate up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six easy-to-change sanding sleeves to allow for a full range of curves that match whatever the situation calls for. The ultra-convenient 1.5 inch dust port provides the option to attach a dust extractor to collect sawdust, ensuring a cleaner work surface while minimizing clean-up after the project.

Powerful Motor

Delivers 3.5 amps (1/2 HP) of sanding power, generating up 2000 RPM and 58 OPM.

Designed for Stable Operation

Pre-drilled holes for mounting along with the sturdy and heavyweight design maximize tool stability.

Cast Iron Worktable

The 15 by 11.5 inch worktable provides more than enough space for larger projects during operation.

Onboard Storage

Side rods and disc slots provide convenient storage for the wide variety of sanding drums and discs.

Ultimate Versatility

The WEN Oscillating Spindle Sander features six different-sized sanding sleeves (1/2, 3/4, 1, 1-1/2, 2, and 3 inches in diameter) and five different rubber drums for optimal compatibility with any size of workpiece. Whatever the shape of your project, expect the WEN 6510 Oscillating Spindle Sander to deliver the right size drum for the job.

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

• CAPACITY: Included infeed/outfeed tables provide 37-1/2 inches of support for the workpiece.
• AUTO ADJUSTMENTS: Feed logic system monitors the drum motor and regulates the speed of the conveyor motor.
• STORAGE: Closed stand with storage for keeping your abrasives organized.
• MOBILITY: Integrated casters make it easy to move unit around the shop.
• SAFETY: Emergency stop for quick shutoff.

User questions & answers

Question:	Does it come with a mobile base or do you have to buy that extra
Answer:	either way you would want to use it but the digital controls are quite accrete. it will shut down it you try to remove too much at a time. I am very please with mine. I use it to sand down to final thickness for cedar chest glue up panels.
Question:	Is the width of the sander from the edge of the motor to the edge of the drum 37 11/16" or 42 1/4"? Thanks
Answer:	The sanding drum is 22" wide.
Question:	Can the top be separated from the base/stand
Answer:	44.31 x 27 x 26.75 inches
Question:	Is the machine usable manually, or only with the digital controls
Answer:	Never tried on Metal .. but I use a regular belt sander on metal .. so I can’t see why it wouldn’t .. however if using with a dust collector the risk of a fire is present. I would use caution in trying it

Product features

PM2244 Drum Sander, 1.75HP, 115V

At Powermatic, we know our woodworkers’ expectations are high when it comes to their machines. With that in mind, when we engineer a new product, we are continuously working to improve the woodworker’s capabilities while simultaneously enhancing their experience. That is why we are proud to introduce the PM2244 Drum Sander. The PM2244 will exceed your expectations with its world-class design, usability and sophistication.

Control Panel

Integrated LED Control Panel shows power, belt speed, and DRO.

Handwheel

Large, chrome handwheel makes adjusting the drum height smooth and simple.

Storage

Closed stand with storage for keeping abrasives organized.

Product description

Remember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It’s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
• Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
• The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
• Onboard storage maintains organization of all accessories and sandpapers
• Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)

User questions & answers

Question:	How easy to go from belt to spindle or vice versa? How long does it take
Answer:	About a minute, take the nut off the top and the belt assembly will come off. Then you can install the plate and drum onto the spindle. Note: the drum and belt opinions use two different nuts, they both come with the machine, the down side is that you have to keep up with the one your not using. To my knowledge the rigid brand is the same way.
Question:	mine is Missing the 1" spindle, is there somewhere to get that
Answer:	the little one is the sanding roll only
Question:	Work Table spec
Answer:	Any bench you desire. It is very stable and does not move around. Good buy, use it for all sorts of sanding projects in the shop.
Question:	Can anyone please tell me In what direction does the belt spin? To the left (counter clockwise) or to the right (clockwise
Answer:	In the photo, there is a stop bar on the right side which indicates the belt moves from left to right, counter-clockwise, pushing a work piece int the stop bar. But I don't own one of these.

Product features

WEN 6524 Oscillating Belt and Spindle Sander

Oscillating up to 58 times per minute, the WEN 6524 Oscillating Belt and Spindle Sander includes a beveling work table, four rubber sanding drums, one belt sanding attachment, six pieces of 80-grit sandpaper and five throat plates to give you the best result every time. Woodworking will get a lot easier with the WEN 6524 Oscillating Belt and Spindle Sander.

Arcs, Curves and Contours

You will be able to make faces, arcs, curves, contours and more with the WEN 6524 Oscillating Belt and Spindle Sander. This tool allows you to fix a dust collection system to avoid the mess and help you clean up faster. Even after several projects and application, this sander will certainly go strong as it is built to be durable and efficient.

Product description

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Sturdy cast iron base prevents any heavy vibrations
• 4.3 Amp motor provides up to 3600 RPM
• Tension release lever provides for simple changes between sandpaper grits

User questions & answers

Question:	Are there finer grits avaialable than the 80 that comes with it
Answer:	You can get belts all the way up to 4000 grit with no problem.
Question:	Which is best all around novice machine, the 6502T or 6500 (both Wen
Answer:	I have the 6502t works like the boss , great product
Question:	Does the unit come assembled
Answer:	Yes, it comes mostly assembled. You have to put on the table for the disk and possibly the disk and belt.
Question:	Could this be used to smooth cut glass bottles
Answer:	You could use any sander as long as you use glass grinding belts

Product features

WEN 4 x 36-Inch Belt Disc Sander

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch sanding disc, you'll have the capacity to sand whatever work piece your heart desires.

Heavy-Duty Cast Iron Base

The sturdy cast iron base prevents wobbling and walking, ensuring the sander stays in one place while you're sanding.

Adjustable Belt

Tilt the belt from a horizontal to a vertical position or anywhere in between depending on the needs of your project.

Dust Collection Port

Attach your favorite dust collector to the 2.5-inch dust port to minimize clean-up of saw dust and debris in your workshop.

Table with Miter Gauge

The sanding disc is accompanied by a support table equipped with 0 to 45° beveling capabilities and a removable miter gauge.

Product description

Big Horn 19521 Sanding Drum Set lets your drill press do double duty as a spindle sander. You'll be ready for virtually every job with this quality set of drums and sleeves. Includes five expanding drums in sizes 1-1/2" by 2-1/2", 1" by 2-1/2", 3/4" by 2-1/2" and 1/2" by 2-1/2" . Also includes two sets of sleeves (two fine sets and two coarse sets). These drums will also work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum.

• A selection of most widely used sizes of rubber-cushioned, self-expanding sanding drums
• Kit includes cloth backed all-resin-bond abrasive bands for each sized drum
• Drum can be used with the portable electric drills, flexible shafts and drill presses
• Drums use friction fit design - no adhesive needed

User questions & answers

Question:	What is the shaft size?? Does not look the same for all drums in the photo
Answer:	I can be used on the supply side or the low pressure side. Not made to withstand any pressure greater then house supply pressure.
Question:	I bought this kit already and love it but where can I buy sleeves. Nothing listed on this sight for
Answer:	It’s a plastic handle, one nozzle is metal. The hose is beyond awesome so nozzles, although great, are not the reason for my purchase of 2 of these hoses! They are simply wonderful and have made watering beyond easy!
Question:	Hi, can you direct me to a seller for 200-600 grit replacement paper
Answer:	Hello, Inner Diameter: 3/8" Outer Diameter: 5/8"(16mm).
Question:	What is the length for each spindle/sandpaper
Answer:	Brass.

Product features

For Portable Electric Drills

The Big Horn 19521 Rubber Sanding Drum Set is a 20 piece bit set that is ideal for a variety of sanding jobs. This is a selection of most widely used sizes of rubber-cushioned, self-expanding sanding drums to make your sanding applications easier. These drums can be used with the portable electric drills, flexible shafts and drill presses as well.

Freehand Sanding

This set will work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum. If you want to smoothen a surface, you will be able to use the Big Horn 19521 Rubber Sanding Drum Set on various materials such as wood and more.

Product description

The NXTUL Drill Press Spindle adapter kit

Tools and Materials Required:

1. 3/32" drill bit

2. 1" drill bit

3. 2" Forstner bit

4. Philips bit

5. Screw gun

6. Adjustable wrench

7. 9/16" wrench

8. Rubber drum

9. Drum sleeve

10. Pencil

11. 3/4" Thick board

• The NXTUL Drill Press Spindle Sander Adapter allows your drill press to work as a spindle sander.
• Support bracket allows for MAXIMUM rigidity! SAE 841 Bronze sleeve bearing infused with graphite for continued lubrication.
• The spindle is precision machined from high grade S7 tool steel.
• Includes compression washers to accept 1/2", 3/4", 1", 1-1/2", 2", & 3" diameter drum sanders.
• Use with 4.5” long drum sanders with ½” through hole* Rubber Drums & Sanding Sleeves not included * *
• Detailed Kit Assembly and Use Instructions included in your purchase.

User questions & answers

Question:	Product description says they fit the 19-38. Do they also fit the 16-32 or is that a separate product
Answer:	These don't fit the 16-32. The tables for the 16-32 actually fold down, whereas these ones do not. The title for this product is wrong, as these are fixed.
Question:	The listing price states $154 / $77 piece, so this is two tables, one infeed and one outfeed
Answer:	Yes. 2 tables.
Question:	Do they come with the mounting hardware
Answer:	All hardware needed to get it up and running was included. I thought the price included a stand but none came. Had to make my own.
Question:	Do these tables fold down to save space
Answer:	They do not fold down. They bolt on into a fixed position.

Product description

Shop Fox W1831 Oscillating Spindle Sander w/ 5 Rubber Sanding Drums & 6 Sleeves

• 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified
• Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
• Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
• Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
• Weighs 30-Pound

User questions & answers

Question:	Will this work on hardenable steel? 1/2 hp seems a little low for it
Answer:	No, this is for woodworking. You would need to purchase a grinder for harden steel.
Question:	Can a vacuum be connected to this unit
Answer:	Yes, you can hook up a vac to it. It has a 1 1/2" plastic connector that sticks out of the back of it. You will need to size your vac to fit over this.
Question:	Does it have a tilting tabletop
Answer:	No it does not have a tilting table but it is a very good sander.
Question:	What's the Spindle Stroke on this
Answer:	5/8"

Product features

Shop Fox W1831 Spindle Sander

This benchtop Oscillating Sander is ideal for smoothing edges after cutting with a bandsaw or scroll saw. Fifty eight oscillations per minute ensures even sanding and six sanding sleeve diameters let you sand a full range of inside curves down to 1/2-inch diameter.

Six Spindle Sizes

With six sanding sleeve diameters, this compact sander will handle just about any sanding task you throw at it. The on-board storage keeps sanding spindles, sleeves, table inserts and spindle washers organized and easily accessible.

The various inserts included with the W1831 are used to close the gap between the table insert and drum which reduces the risk of pinching and offers more work support for your sanding jobs.

Built-In Dust Port

The built in 1-1/2-inch dust port ensures a cleaner shop and less airborne dust particles when connected to a dust collector.

Locking Power Switch

The locking power switch with removable key helps protect against unauthorized use and heavy duty cast iron table offer plenty of work support; all which make this a great bench top machine.