12 best drum sander for metal

Product description

Features:

-The wear-resistant thickening rubber and aluminum shaft wheel are adopted to prevent rust and make it lighter, more efficient and durable.

-The polishing air drum is used for polishing the air drum motor, and it is used for polishing wood with other processing materials.

-This pump sleeve sanding attachment can be mounted on any long 1" diameter arbor or even mounted between centers on a lathe to allow sanding of odd shapes or contours.

-The drum is inflatable or deflatable via a standard tire pump.

-With the corresponding size of sand cylinder, the polishing air drum is elastic and can adjust the outer diameter through the aerated air discharge, which can tighten the sand cylinder to achieve the high efficiency polishing requirements.



Specification:

Sanding Drum

-Material: Rubber, Aluminum Conductor

-Size(Diameter x Height): 70mm x 230mm/3"x 9"

-Bore Diameter: 25mm/1"

-Quantity: 1Pc



Drum Sanding Sleeves

-Material: Abrasive Aluminum Oxide, Cloth , Resin Bond

-Color: Dark Red as pictures show

-Size: 230x230mm

-Grit: 120#

-Quantity: 5Pcs



Package Include:

-1pcs 3"x9" Pneumatic Drum Sander+ 5Pcs 3"x9" 120# drum sanding Sleeves.



Note:

-Please be carefully check the goods appearance, size, shape and then compare your original goods before ordering, thank you.

-Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

-Since the size above is measured by hand, the size of the actual item you received could be slightly different from the size above. Please don't mind, thank you!

• ★[PACKAGING INCLUDES] - 1pcs 3"x9" Pneumatic Drum Sander+ 5Pcs 3"x9" 120# drum sanding Sleeves.
• ★[FITMENT] - The polishing air drum is used for polishing the air drum motor, and it is used for polishing wood with other processing materials.
• ★[FUNCTION] - Mainly used for all kinds of wood, furniture, and other non-metal polishing.This pump sleeve sanding attachment can be mounted on any long 1" diameter arbor or even mounted between centers on a lathe to allow sanding of odd shapes or contours.
• ★[HIGH QUALITY] - The wear-resistant thickening rubber and aluminum shaft wheel are adopted to prevent rust and make it lighter, more efficient and durable.5Pcs drum sanding Sleeves is Premium aluminum oxide sanding belts,good abrasion resistance, have good effect.
• ★[AFTER SALE] - Manufacturer warranty for 90 days from date of purchase.We are committed to provide excellent customer service,If you have any questions,please contact us.We will try our best to solve your problem.

User questions & answers

Question:	How do you attach
Answer:	There are no enzymes in Outback Gold.
Question:	What size shaft do need on the sander
Answer:	It’s on the product details.
Question:	The ad references 25mm/1 inch. Which is it: 25mm (.984") or one inch
Answer:	It won’t make it any more itchy for sure. Getting the dirt out of the wool will soften it. However, if you are allergic to lanolin in wool, realize that this product has lanolin in it to revitalize the wool. It surely softened my rugs. I had to work diligently at separating the fibers as it dried and when dry.
Question:	What type of mandrel or shaft is required for this drum, and how is the drum driven? Can you link a proper spindle please.lease
Answer:	I I have an Oreck vacuum cleaner and I do pick up the powder after it is dried with that I don't know what the Orbiter is but I just sprinkle this on brush it in with a long-handled brush and leave it set for an hour and then vacuum it up works great

Product description

Remember when you could smooth out those jagged curves? Take on edges, contours, holes, insides, outsides and whatever other sides with the WEN 20-Piece Sanding Drum Kit. Simply pop the 1/4-inch shank of your sanding drum into your preferred chuck, then get to sanding. This package includes one 1/2-inch sanding drum with a 1/2-inch diameter (1/8-inch shank), one 1-inch sanding drum with a 3/4-inch diameter (1/4-inch shank), one 1-inch sanding drum with a 1-inch diameter (1/4-inch shank), one 1-1/2-inch sanding drum with a 2-inch diameter (1/4-inch shank), two 80-grit sanding sleeves in each size, and two 120-grit sanding sleeves in each size. Just pick your size, slide the sleeve into place, and tighten the bolt that appears on the underside of each drum. Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill. Remember when you could reach the unreachable?

• Features four sanding drums and 16 pieces of Sandpaper
• Perfect for your WEN drill press or your WEN 20V max Lithium Ion power drill
• Includes two 80-grit sanding sleeves and two 120-grit sanding sleeves in each size
• Four sanding drums measure in at 1/2-by-1/2 inch, 1-by-3/4-inch, 1-by-1-inch, and 1-1/2-by-2-inch
• 1/8 to 1/4-inch shanks fit in the majority of drill presses and power drill chucks on the market

User questions & answers

Question:	can you buy replacement sleeves
Answer:	Hey! This is Mallorie at Superfeet HQ. Your usage will determine how often the insoles need to be replaced. Our general rule of thumb is 1 year or 500 miles.
Question:	Will this work for sanding glass
Answer:	Hey! This is Mallorie at Superfeet HQ. Yes, a man could wear the BERRY insole, but if you're interested the men's equivalent insole is the ORANGE.
Question:	Will these work with a table router
Answer:	Every 12 months or 500 miles. They are guaranteed for 60 days. You will love these if you are having foot problems. I was skeptical because they are so thin. They have definitely taken care of my plantar fasciitis. It took a couple of weeks for the pain to stop but I am sold on these!
Question:	Is this the product used to enlarge birdhouse holes
Answer:	Thats tricky. When you buy shoes with actual arch support built in them, does it feel like the aech is in the right place for you or does it feel like it is too far forward or backword? I would say if they are always in the right place, order the size 8.5-10. But if they feel like they are too far forward, order the size 6.5-8. My very first pair of superfeet I bought, I had been fitted for in a comfort shoe store in a mall, and the very knowledgeable man who helped me, said my foot measures a size 8, but my arch measures a size 8.5. The next pair I bought, these berry ones, I ordered from Amazon, and I got the size C. After wearing them for nearly 2 years now and thinking these don't provide me nearly as much support as my Vionic flip flops do, I realized that the arch support hits too far back and I should have gotten the next size up, the size 8.5-10. So now I am ordering the next size up in the Superfeet Blueberry (as they are suppose to have the next level up of arch support from the Berry's) and that should solve my problem.

Product features

WEN DS164 20-Piece Sanding Drum Kit for Drill Presses and Power Drills

Remember when you could smooth out those jagged curves? Take on edges, contours, holes, insides, outsides and whatever other sides with the WEN 20-Piece Sanding Drum Kit. Simply pop the 1/4-inch shank of your sanding drum into your preferred chuck, then get to sanding. This package includes one 1/2-inch sanding drum with a 1/2-inch diameter (1/8-inch shank), one 1-inch sanding drum with a 3/4-inch diameter (1/4-inch shank), one 1-inch sanding drum with a 1-inch diameter (1/4-inch shank), one 1-1/2-inch sanding drum with a 2-inch diameter (1/4-inch shank), two 80-grit sanding sleeves in each size, and two 120-grit sanding sleeves in each size. Just pick your size, slide the sleeve into place, and tighten the bolt that appears on the underside of each drum. Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill. Remember when you could reach the unreachable?

• Features four sanding drums and 16 pieces of sandpaper
• Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill
• Includes two 80-grit sanding sleeves and two 120-grit sanding sleeves in each size
• Four sanding drums measure in at 1/2-by-1/2 inch, 1-by-3/4-inch, 1-by-1-inch, and 1-1/2-by-2-inch
• 1/8 to 1/4-inch shanks fit in the majority of drill presses and power drill chucks on the market

• This sander is a great addition to the shop needing to shape and finish contours
• On one side choose between the included 3-1/4-Inch diameter or 4-3/4-Inch diameter inflatable sanding drums
• On the other is a 10-1/2-Inch diameter by 7-3/4-Inch long flap sander with twelve abrasive flaps backed up by flexible bristle brushes

User questions & answers

Question:	how do I remove/replace flaps and aluminum ends
Answer:	You might be able to get them at a place in Illinois called Sand-Rite or a place called SuperGrit.
Question:	i need a 6" x 6" replacement bladder or inflatable sanding drum for my grizzlymodel g1061 buffing machine. where can i find such
Answer:	Don't need the clips, after wrapping the sandpaper on the Velcro, wrap the ends with 1" packing tape, the rienforced kind. Velcro is 5 -6 " can't remember. Included paper is 3 ". Best investment one could make to the sander.
Question:	Are there any 220 grit sleeves for this machine
Answer:	No. The flatter sushi pieces will fit nicely, but not the typical roll because the tiers are not square in cross-section.
Question:	Is Grizzly the only place you can obtain sanding sleeves for replacement? Thank you
Answer:	It is Dishwasher safe not shure about microwave~

Product features

1 Horsepower Wood Drum / Flap Sander

This sander is a great addition to any shop needing to shape and finish contours. On one side, choose between the included 3-1/4" diameter or 4-3/4" diameter inflatable sanding drums. On the other is a 10-1/2" diameter by 7-3/4" long flap sander with twelve abrasive flaps backed up by flexible bristle brushes. Order replacement flap sandpaper in 6" wide rolls in the grit of your choice.

Safety Paddle Switch with Removable Key

3-1/4" and 4-3/4" Inflatable Sanding Drums Included

Flap Sander with Bristle Brushes and Replaceable Twelve Abrasive Flaps

Shape and Finish Contours

Specifications:

• Motor 1 HP, 110V, single-phase, 1725 RPM
• Toggle ON/OFF safety switch with locking tab
• Flap sander supplied with 120 grit paper
• Inflatable drum sizes are 4-3/4" x 7-7/8" and 3-1/4" x 7-7/8"
• Arbor: 22mm
• Benchtop footprint: 6-1/2" x 9" (base only)

Product description

Features:

High quality materials, energy saving and environmental protection

Rugged and easy to operate

The professional linear surface Finisher for flat, curved or pipe applications. It is compact, lightweight and heavy duty. Ideal for graining, polishing, brushing, blending, deburring, cleaning welds, roughing and more.

Repair the scratches of stainless steel and aluminum, the polishing and polishing after welding, the repair of the texture

Thickened protective cover for safer use

Speed adjustable





Specifications:

Color:as the picture shows

No-load speed:3000r.p.m

Air consumption:0.33 m3/min

Sand Tray Size:100*120mm

Air Inlet:1/4''

Air Pressure:90Psi-6.2kg/cm2

Leaf length: 45mm

Weight:3.4kg





Package Included:

1 x Pneumatic wire drawing machine

3 x nylon Polishing Wheel

1 x Protective cover

1 x Auxiliary Handle

1 x Accessory package

• The professional linear surface Finisher for flat, curved or pipe applications. It is compact, lightweight and heavy duty. Ideal for graining, polishing, brushing, blending, deburring, cleaning welds, roughing and more.
• For removing rust, oxide layers, scratches, applied for stainless steel, steel non-ferrous metals, plastic, and wood on the grinding, polishing, fine polishing (mirror work), for using on cast iron, steel, stainless steel, and nonferrous metals
• Sand Tray Size:100mm x 120mm ;Air Pressure:90Psi-6.2kg/cm ;Air Inlet:1/4'';No-load speed:3000r.p.m
• Used For tarnishing, burnishing, and polishing stainless steel and nonferrous metals
• Thickened protective cover for safer use

User questions & answers

Question:	Hi. will this tool use standard 4" flap whels like eastwood's? where are your flap wheels available? thanks
Answer:	No, it cannot. The width is over 7.5" and the height is 8" including the shield and the handle.
Question:	Does 4" x 4" standard media (Jegs, Eastwood) fit on this? What is warranty
Answer:	If you mean horizontally, I would not advise it as the but of the rod could slip out easily. If you remove the plastic insert where the but end of the rod sets it would give more room for support. In that case it should work. If there is no reel on the god no problem.
Question:	Can this fit into a 5.5” wide space including the drive head and axle width? Another unit couldn’t because of the 4” spindle even with 2” drum
Answer:	It would hold saltwater rod and reels. It may not hold as many, depending on the size of them.

Product features

Walter Surface Technologies Line-Mate III Variable Speed Drum Sander and Finishing Tool Starter Kit

Walter Surface Technologies 30A269 Line-Mate III Model 6268 Starter Kit is manufactured for simplifying surface preparation procedures comprehensively.

The Line-Mate III tool is a reliable industrial equipment that produces a linear finish.

Apart from this power tool, the industrial-grade surface preparation set includes a variety of suitable abrasive drums and drum belts.

About Walter

Walter Surface Technologies has been providing high productivity abrasives, power tools, tooling, chemical solutions and environmental solutions for the metal working industry.

Founded in 1952, Walter Surface Technologies is now established in 7 countries in North America, South America and Europe. As a company, we continuously design and develop new tools to increase productivity and safety in the metal fabricating and finishing industries.

Product description

Big Horn 19521 Sanding Drum Set lets your drill press do double duty as a spindle sander. You'll be ready for virtually every job with this quality set of drums and sleeves. Includes five expanding drums in sizes 1-1/2" by 2-1/2", 1" by 2-1/2", 3/4" by 2-1/2" and 1/2" by 2-1/2" . Also includes two sets of sleeves (two fine sets and two coarse sets). These drums will also work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum.

• A selection of most widely used sizes of rubber-cushioned, self-expanding sanding drums
• Kit includes cloth backed all-resin-bond abrasive bands for each sized drum
• Drum can be used with the portable electric drills, flexible shafts and drill presses
• Drums use friction fit design - no adhesive needed

User questions & answers

Question:	What is the shaft size?? Does not look the same for all drums in the photo
Answer:	I can be used on the supply side or the low pressure side. Not made to withstand any pressure greater then house supply pressure.
Question:	I bought this kit already and love it but where can I buy sleeves. Nothing listed on this sight for
Answer:	It’s a plastic handle, one nozzle is metal. The hose is beyond awesome so nozzles, although great, are not the reason for my purchase of 2 of these hoses! They are simply wonderful and have made watering beyond easy!
Question:	Hi, can you direct me to a seller for 200-600 grit replacement paper
Answer:	Hello, Inner Diameter: 3/8" Outer Diameter: 5/8"(16mm).
Question:	What is the length for each spindle/sandpaper
Answer:	Brass.

Product features

For Portable Electric Drills

The Big Horn 19521 Rubber Sanding Drum Set is a 20 piece bit set that is ideal for a variety of sanding jobs. This is a selection of most widely used sizes of rubber-cushioned, self-expanding sanding drums to make your sanding applications easier. These drums can be used with the portable electric drills, flexible shafts and drill presses as well.

Freehand Sanding

This set will work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum. If you want to smoothen a surface, you will be able to use the Big Horn 19521 Rubber Sanding Drum Set on various materials such as wood and more.

Product description

Sanding Drum Kits.

• Country Of Origin: United States
• Model Number: DRUM KIT SDK-3
• Item Package Dimension: 10.63" L x 5.25" W x 2.375" H
• Item Package Weight: 1.04 lb

User questions & answers

Question:	What is the diameter of the shaft
Answer:	Sand drum is 3 inches long.
Question:	The description states 9 piece but I see 12 in the pic? Is this the sleeves and the drum as a kit like it states
Answer:	It was difficult to find , but i found it from many suppliers . With the good words on amazon like burnishing wheels ... I command different grit from 3 companies ... 4 inches and with the little crux at the end ! I found wheels with nylon and brush wire ...
Question:	Question: you say extra long but dont say total length
Answer:	Yes I use an Eastwood wire brush on mine I don’t know about the warranty

Product description

This is an angle grinder burnishing and polishing machine accessory, suitable for angle grinder and you can replace different wheels for your machine easily.



Specifications:

Material: metal+nylon

Main color: black

Grinder connect shaft size: M10, M14 (optional)

Suitable electric angle grinder: M10 connect shaft 100mm (4") / M14 connect shaft 115mm (4.5")

Burnishing wheel:

Outer diameter: 120mm / 4.7in

Height: 100mm / 3.9in

Grit: 80#



Note: the maximum size of the hoop is 42mm.



Package list:

1 * Angle Grinder Burnishing Polishing Machine Attachment

1 * Burnishing Wheel

1 * Handle

1 * Bag of Accessories

• ❥Convenience design❥Change your angle grinder into burnishing polishing machine in a minute.Make a smooth burnishing surface.
• ❥Stably and safely❥Solid protective cover and practical shaft make the grinder attachment work stably and safely.
• ❥Convenient to use❥With a comfortable handle, which is more convenient to use.
• ❥Scope of application❥Perfect for wood, metal, stainless steel polishing and grinding, easy and fast polishing and burnishing.
• ❥Wide range of uses❥Used for burnishing and polishing stainless steel and nonferrous metals, removing rust, oxide layers, scratches etc.

User questions & answers

Question:	This doesn’t fit my dewalt or milwaukee angle grinder. do you gave a conversion adapter? what angle grinder does it fit
Answer:	3 drums 3 sleeves each grit = 12 pieces

Product description

Features:

100% brand new, high quality, never used before. The inflatable polishing drum can be adjusted by inflation and deflation to tighten or loosen the sand bucket to meet different polishing requirements. Suitable for multifunctional air drum grinding machine Widely used, Suitable for polishing wood with other processing materials.



Specification:

Material: Rubber, Aluminum Conductor

Color:Black

Diameter: 85mm

Hole Diameter:25.4mm

Height:215mm Abrasive belt

Material: Abrasive Aluminum Oxide Cloth , Resin Bond

Color:As pictures show

Grit: 120Girt



Package Includes: 1Pc Rubber drum +5pcs 120 Girt Abrasive belt



Note: If you're not sure about comparability / fitment, please leave a message to us, we will answer your question through the customer service in time.

• ★Material: Rubber,Size:85mm x 215mmx26mm(Diameter x Height x Bore Diameter)+5pcs 85mm x 215mm(Diameter x Height x Bore Diameter) 120 Girt drum sanding sleeves.
• ★The wear-resistant thickening rubber and aluminum shaft wheel are adopted to prevent rust and make it lighter, more efficient and durable.
• ★The inflatable polishing air drum has elasticity, and the outer diameter can be adjusted through inflation and deflation, so that the sand cylinder is tightened to meet different polishing requirements.
• ★Mainly used in furniture, wood, metal grinding and non-metal grinding industries, with the function of grinding planes, uneven surfaces, removing burrs, burr, pouring riser, chamfer, polishing, etc.
• ★This pneumatic drum sander fills the airbag with gas, and then uses the same size of abrasive belt for polishing. Depending on the thickness of the belt, the product can be coarsely ground, medium and finely ground,so the polishing efficiency is high.

Product description

100 PC 1/2" sand drum with 2 Mandrel fit dremel grit 80 coarse

1/8" shank size (Fit Dremel and other Rotary Tools)

Package include:

100 piece 1/4" 60 Grit, 1/4"(6.35mm) Diameter

2 piece 1/4" X 1/2" Sand Drum

Note: NO Retail Box. Packed Safely in Bubble Bag.

• 00 pcs 80 Grit Drum Sanding Kit With 1/4"/6.35mm Sanding Mandrels Fit
• 100 piece Sand Drum 1/4" 60 Grit, 1/4"(6.35mm) Diameter. Used For Polishing
• Great for doing body work in tight spaces, or all types of small crafts metal and wood working.
• Rubber expansion-drum mandrels - slide bands over drum & tighten screw for non-slip fit.Turn your rotary tool into versatile high-speed sander. Ideal for rough-shaping and smoothing wood and fiberglass.
• Perfect accessory to sand, shape, groove & finish soft & hard woods, fiberglass & more.Grit Sanding Drum for rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces, and shaping rubber surfaces.

Product description

Sun gold Abrasives has been manufacturing abrasives for over 40 years for professionals in the woodworking, metalworking, Stone, contractor trades and other industrial applications. From furniture and cabinets to wood floor refinishing to metal polishing and Stone, acrylic and other Countertop fabrication applications. Our abrasives are designed to extend life and provide the best finish With the least amount of time required.

• For use with drum sanders to save money by cutting your own strips.
• Premium X-weight aluminum Oxides cuts fast and hold up to the most demanding sanding applications
• Can make 4 strips for a 16" drum such as the Jet16-32
• Use the strip on the machine as a template to cut the new strip
• Can be used for any application where cut to size is needed

User questions & answers

Question:	Does this have a cloth backing or is it an adhesive backing
Answer:	1/4 shank

Product description

Delta, 31-741, 5 Piece Drum 100 Grit Sleeve Sanding Kit (3/4", 1", 1-1/2" 2", 3") FOR B. O. S. S. Spindle Sander

• 5 Pc. Size Assortment: 3/4 in. , 1 in. , 1 1/2 in. , 2 in. , and 3 in.
• Includes Rubber replacement drum
• Fits DELTA SA350K B. O. S. S. Bench Oscillating Spindle Sander
• 100 Grit

Product description

At SI FANG , we aim to manufacture the best products that inspire our consumers to live a more convenient, secure lifestyle.

We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products.

If you have any questions please contact me. I will reply within 24 hours and try my best to assist you.





Features:

Fast speed and high efficiency, has a long service life.

Angle rotation operation is simple and easy.

Horsepower is strong, safe and energy-saving.

Scope of application: polishing and trimming of aluminum casting products, wooden furniture industry, glass fiber, plastic, metal products.





Specifications:

Material: steel

Color: silver

Free speed: 16000rmp

Belt size: 10 * 330mm / 0.4 * 13.0in

Air inlet: 1/4"

Air hose: 3/8"

Air consumption: 6cfm

Belt Grit: #60,#80,#120

Working pressure: 90psi

Length: 280mm / 11.0in

Item weight: 850g / 1.9lb

Package size: 300 * 90 * 50mm / 11.8 * 3.5 * 2.0in

Package weight: 900g / 2.0lb





Package list:

1 * 10mm Air Belt Sander

6 * Belt(2pc * #60 ,2pc * #80,2pc * #120)

1 * Wrench

1 * Thread Connector

• Suitable for all sanding jobs including wood working / furniture polishing / plastic / aluminium and all forms of metal polishing,Especially suitable for those heard to reach awkward areas
• Small Size, Light Weight, Low vibration, Easy to take grip operation
• Applied for: Excellent multi-purpose tool for grinding sharp metal edges, rusted bolts, welds, etc. Great for spot weld removal. Effective for blending, scuffing grooves and contours.
• Variable Speed: Variable speed control dial (980-5,600 ft./min.) enables user to match the speed to the application.
• Size of Belt: 10mm x 330mm ,16000 RPM max speed ，Package Including:one 3/8inch air belt sander and 6Pcs Air Belt Sander Belt, Grit include: #60、#80、#120 ；The materials are alumina （3Pcs）and zirconia (3Pcs）