14 best home tools home routers

Product description

The M18 Fuel Compact Router combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The compact router leverages our Powerstate Brushless Motor and Redlink Plus electronics. This delivers the power of corded 1.25 horsepower trim routers and best-in-class 31,000 RPM providing you with power and speed for clean, quality cuts in hard materials.

Compact and Portable

With the M18 Redlithium XC5.0 battery, the cordless compact router cuts up to 250 feet of 3/8-inch roundovers in red-oak, providing you with all-day run time with fewer trips to the charger.

Versatile

The handheld router is equipped with a micro-adjust dial and macro-adjust button, providing you with fast and accurate depth adjustments for highly accurate work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives you control in all applications.

Features

The compact router also features a sturdy 4-inch sub-base plate providing you with stability, and dual-LED lights illuminate your work surface. The M18 FUEL Compact Router is compatible with a plunge base and an offset base (sold separately).

• POWERSTATE BRUSHLESS MOTOR: Power of corded compact routers and higher SPM to complete cuts in hardwoods
• PERFORMANCE: Redlink Plus intelligence ensures maximum performance and protects from overloads, heating and over-discharge. Variable speed dial ranges between 10,000 and 31,000 rpm, providing precise control for clean edges and details
• ADJUSTMENTS: Macro Adjust button allows for fast macro-adjustments and 1.5-inch of adjustable range. Fine adjustment screw allows for precise adjustments beyond 1/64-inch increments
• COMPATIBILITY: Compatible with Milwaukee Plunge base and Offset base attachments (sold separately)
• MILWAUKEE AUTHORIZED DEALER: Includes USA Manufacturer Warranty

User questions & answers

Question:	se debe comprar por separado las baterias y el cargador de baterias
Answer:	Si no incluye cargador ni batería pero es una buena herramienta se lo recomiendo 👌
Question:	Will the router base work with guide bushings
Answer:	It comes with a second, larger base and that one will accept a guide bushing.
Question:	is it possible to use bits with a shank of a larger diameter? Need to use 8mm shank
Answer:	No it is only a 1/4" shank router.
Question:	where is it made
Answer:	China

Product description

Precision woodworking is readily at your fingertips with the Stalwart 24-piece router bit set. Featuring 15 different bits with ¼ inch shaft bits that fit all routers, this set is ideal for the person just staring out or the experienced pro.



IMPORTANT:

Avoid buying counterfeit products and transacting with unauthorized sellers. Look for our logo on the packaging for every one of our products. Stalwart is committed to providing the consumer with the absolute best price and value on all of our products, which we ensure by applying a rigorous Quality Control process. Stalwart a registered trademark protected by U.S. Trademark law and will be vigorously defended.

From the Manufacturer

This is a great set for the woodworker just starting out or anyone needing a commercial quality set of bits. This same set is being sold by popular catalogs and online retailers for a lot more money. These yellow bits do cut well and are a great value.

• DURABLE CONSTRUCTION – Stalwart’s carbide tipped router bits are built to last and are constructed using high quality materials. Along with the sturdy wooden case, this durable router bit set will allow you to complete all your projects with confidence.
• MULTIFUNCTIONAL SET -  With 24 included pieces, this kit is great for multipurpose uses. It is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels. This set also includes an allen wrench for removing bearings.
• EASY TO STORE- The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations
• SET INCLUDES- 1/2 mortising bit, 1/2 combination bevel bit, 3/8 dovetail bit, 1/2 dovetail bit, 1/2 90 degree V-groove bit, 3/8 round nose bit, 1/2 round nose bit, 3/8 trimming bit, 1/4 panel pilot bit, 1/4 straight bit, 3/8 straight bit, 1/2 straight bit, 3/4 straight bit, 1/2 flush trim bit, 1/8 radius round over bit, 3/16 radius round over bit, 1/4 radius round over bit, 3/8 radius round over bit, 1/4 cove bit, 3/8 cove bit, 1/2 45 degree chamfer bit, 1/4 Roman Ogee bit, 1/4 slot cutter bit, 1/2 rabeting bit, wood case
• Router bit bits set tongue and groove wood doors flooring shaker door routers panel shank joint 1 2 storage kit holder for cabinet sets inch case box plywood tool tools accessories DIY home improvement

User questions & answers

Question:	What is the cutting edge made of: carbide or HSS
Answer:	I don't have a Drexel 300, but it's my understanding that they are supposed to work with any 1/8" coulet. I use mine with a Dremal and a Harbor Freight 1/4" trim router.
Question:	These are classified under hex-shank bits, but they seem like round shank. Are they misclassified
Answer:	If it has the standard 1/8" collet they will. Mine work great for carving both, directly on the Dremel, and on the flexible 30" extension.
Question:	Will all these bits fit to Ryobi cordless Trim router? I believe Ryobi router take 1/4" shanks
Answer:	These bits are definitely steel instead of carbide. None of them are particularly sharp, nor do they last long. After utterly ruining a fine piece of maple, I threw them away.
Question:	Made in china
Answer:	Hola. Es compatible. El vástago mide 3mm de diámetro

Product features

About Us

Stalwart is a proud Brand and wholly owned subsidiary of Trademark Global, LLC. Using our infrastructure, Trademark Global is one of the top provider of consumer products to mass market internet retailers, acting as the 'endless aisle' our partners demand.

Stalwart is one of the many brands in our portfolio dedicated to providing the consumer useful products at a tremendous value. At Trademark Global we have always been a pioneer in the e-Commerce marketplace and Stalwart brand products represent perfectly the overall company mission to deliver that value through consistent quality, price and customer care.

Trademark Global is solely dedicated to delivering products via the e-Commerce channel. We are equally dedicated to providing exceptional customer service, as we believe that our promise begins when you open the box.

Product description

When using hand held power tools the tend to generate a lot of dust. Standard size Shop Vac hoses are too large and bulky and typically do not flex or maneuver all that easily. This small 1-3/16" O.D. flexible dust collection power tool hose moves freely with your power tools making super convenient and hardly noticeable while its connected. Not only is this hose easier to manage, but using this hose with your tools will keep your shop cleaner and it can be quickly coiled up for easy storage. The kit comes with two different screw on flexible rubber fittings on each end of the hose which are ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tools with small dust collection ports. It can also be used on a number of smaller stationary tools like the K4 or K5 Kreg Jig for example. The small power tool hose will adapt to a 2 -1/4" I.D. Shop Vac opening using the taper vacuum adapter that comes in the box. PLEASE NOTE: Before you place your order check the size of your vacuum and power tool ports to make sure the hose and fittings will fit properly. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.

• Our small 1-3/16" O.D. flexible dust collection power tool hose moves freely when connected with your power tools and vacuum. The hose with its specialized fittings, work with multiple power tools and jigs.
• The small end of the hose is ideal for connecting random orbital sander, palm sanders, biscuit joiners or any other power tool with small dust collection ports. This kit will also work with popular tools like the K4 or K5 Kreg Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
• Included inside the box: 1 each ten foot long 1-3/16" O.D. small flexible hose, 1 each small flexible rubber screw on fitting, 1 each large flexible rubber screw on fitting and 1 each plug in shop vacuum adapter that will allow you to connect the hose to most shop vac's.
• The small screw on rubber fitting has a 1" I.D. with a 1-3/16" taper up to 1-1/4" O.D. , the large screw on rubber fitting has a 1-1/2" I.D. with a 1-25/32" O.D. The vacuum adapter has a 2-1/4" taper up to 2-5/16" O.D. on the large end and the small end of the adapter is designed to plug into the end of the large flexible rubber screw on fitting. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.
• PLEASE NOTE: Before you place your order, please check the inner and outer (I.D. and O.D.) diameter of your vacuum ports and power tool ports to make sure the hose and fittings will fit properly and work for your needs.

User questions & answers

Question:	Can it be used together
Answer:	? not sure what that means "together" together with what?
Question:	Does this allow the hose to rotate inside the fitting (at the tool
Answer:	No. The fitting screws onto the fitting and it's firm, no rotation.
Question:	is this a hard or a pliable plastic? What is the ID of the tool end of this hose
Answer:	the hose and fittings are pliable. The ID on the tool end hose fitting is 1 1/2 but mine came with a hard plastic adapter that would give you 1 3/4 or 3/4 ID's as well
Question:	Will it fit a shop vac brand vacuum
Answer:	I believe so, the ends are flexible vinyl type material.

• ◆ High Quality : Hard C3 tungsten steel and 45# carbon steel for durability,it is smooth cut,stable,fast when doing woodworking
• ◆ DIYer like it : Router bits(1/4" shank) will help you cut rounded edges, V-shaped grooves, round-bottom grooves, and plenty more. These 12 bits will help any DIYer get the most out of a versatile power tool
• ◆ Easy to storage : Included wooden case,sturdy and makes storing the high-quality router bits convenient while in-between jobs or home improvement DIY projects
• ◆ 12pcs Router Bit Set(1/4" shank) include : Straight Bit: D1/4",D1/2",D5/8"; 90° V"Grooving Bit: D1/2"; Dovetail Bit:D1/2"; 45-degree Chamfer Bit: B1/2"; Flush Trim Bit:D1/2"; Cove Box Bit: R1/2"; Round Over Bit: R1/4", R3/8"; Cove Box Bit: R1/4"; Roman Ogee Bit: R5/32"
• ◆ 100% Satisfaction Guaranteed : We are so confident in the quality of our product that we offer a 30-day satisfaction guarantee

User questions & answers

Question:	I don't see a Rabbeting bit included, but several reviews seem to suggest they are able to get accurate rabbets. Can someone help me understand
Answer:	The router bit can be used on wood surface and plastic surface mostly , and different bits have different function . I think 12pcs bits is enough to home DIY. Not suitable for processing non-wood materials such as metal and stone
Question:	What surfaces can these bits used on
Answer:	I assume they are, it is not indicated on the packaging I have left. No matter what, a great set of bits I have used a lot. highly recommended!
Question:	made in china
Answer:	I am a novice with the router. The bits have been good for me, but have not use them enough to gage how sharp they stay. I would get them again.
Question:	Can router bits this cheap actually be any good? Can any say how long they have lasted or are all these buyers just casual users
Answer:	No this entire kit is very durible colors will not fade and might i add the shaving files and sander that comes with it stays sharp ive had this kit since February and its still as the day i bought it no bleeding colors

Product features

About Router Bit Set with 1/4" Shank

• 12pcs high quality router bits enough to meet the needs of DIY and professionals.
• C3/Y8 micro-grain tungsten carbide cutters, 45# carbon steel of handle,enables you a more professional and smoother cutting.

Why choose 12pcs router bits with 1/4" shank?

1. Sealed bearings , smooth accurate cuts
2. Bits can be re-sharped
3. Supply in handy wooden storage case

Where to use with 12pcs router bits with 1/4" shank?

• Suitable for chipboard, MDF board, hardwood & softwood etc.
• Also used in sign making letter,cabinet,door etc.
• Woodworking for commercial / residential.

Smooth Operation

Each bit is powder coated for an extra layer of protection. This allows you to use your router bits multiple times without compromising the quality of the bits. Enclosed bearing roller makes for easy alignment for a dreamless operation

Quality Construction

C3 Tungsten carbide blade provides a clean and accurated cut .All of the router bits come with a 1/4" universal shank that easily fits into any router tables or router tools for a secure fit.

Easy to Store

Includes wooden case for easy storage when not in use. Each bit comes accordingly with labels so you can easily identify which bit style you need. Store bits upright in its original position for best maintenance.

Who we are ?

FivePear is a professional team on Amazon, which deals only with development of the Wood Tools and accessories .We commit ourselves to using qualitative tools to improve the quality of life!

FivePears is famous brand that protected from American . We wish to help our clients improve their productivity by using our durable and affordable tools. We cares about customer's feedback, and are willing to hear your voice to make our products better to meet your needs.

Any question about our products , don't hesitate to contact with FivePears Teams

Product description

2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs.



Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry.



Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable.



Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.



Package Included：8 x 4 Flutes End Mill Cutter.



High quality carbide tungsten steel material - excellent wear resistance and greatly improved milling life







Chamfer design - easy to install, round and smooth handle with precision chamfer saving tool change time







Grinding spiral angle - unique chip flute shape prevents chip formation







Double-layered blade with burr - double-edged with milling cutters for increased edge rigidity and effective burr removal

• 2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs.
• Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry.
• Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable.
• Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.
• Package Included：8 x 4 Flutes End Mill Cutter

User questions & answers

Question:	Will this work in a 1/4" trim router
Answer:	10 feet or 10 min.
Question:	What is the warranty on these bits
Answer:	They do ok in aluminum. Sticks a little depending on setup and really a 3-flute is preferred. No idea about lead.
Question:	Anybody know how well these will mill lead and aluminum
Answer:	I mean yes, but coated end mills are more for metals. Wood debris sticks to the coating. You'd also need the appropriate collets and such.
Question:	can these mills be used in a plunge router
Answer:	I bought this product because of the guy that answered yes to this question....these are the least center cutting endmills I have every seen. If you want center cutting endmills, steer clear of these.

Product description

BAIDETS provides high-quality quality, professional tools, and high-quality services, that wish to make your life more convenient and better!

Product Specification:

Material: Alloy blade + carbon steel handle

Color: Yellow

Shank Diameter: 1/4”

Package included:

1 X Cove box bit 1/8"

1 X Bearing 45° Chamfer bit

1 X Straight bit 15/64"

1 X Rounding over bit 3/8"

1 X 90° "V" Grooving bit 1/2"

1 X Roman ogee bit 5/32"

1 X Straight bit 1/2"

1 X Straight bit 7/64"

1 X Cove box bit 1/4"

1 X Bearing cove box bit 1/4"

1 X Covetail bit 1/2"

1 X Rounding over bit 1/4"

1 X Straight bit 1/4"

1 X Bearing flute trim bit 1/2"

1 X Straight bit 5/8"

1 X Allen wrench

Different cutter types, work out a different effect.

Features:

1.Made of High Grade Carbide for durability.

2.Cutters are sharp enough that you can cut it smoothly. The production is clean and free of cracks.

3.The shank diameter of the bits are 1/4 inch, fit most of portable router.

4.Suitable for all woodworking projects for both professionals and hobbyists;simple construction and easy to opperate.

Safety instructions:

1.Please wear protective goggles,because it's safe for you.

2.Do not wear gloves to avoid hazard of getting caught in the tool and pulling your hand in to get mangled during bit spinning

3.Examine the bits before use for cracks or chips. Do not use damaged or bull bits.

4.Please make sure that the Router Bit and router table connections is tight and avoid loosening and causing it to throw out !!!

5. Designed for a laptop or desktop woodworking engraving machine like CNC hand-held and table-mounted portable router, please note can not be used in electric drill & drill machines.

• These router bits made from high-quality alloy blade, makes clean and accurate cuts on all types of wood with excellent resistance to heat. Hardened solid alloy steel main construction with power coating finish for durability and longevity.
• All router bits have universal 1/4" shank, suitable for1/4" all models of routers, milling machines, woodworking machinery, tenon and various wood carvings. The 1/4" bits provide greater stability and less vibration during use.
• Set Includes 15 pcs 1/4 inch shank router bit set, most commonly used sizes: Include Cove box bit 1/8", Bearing 45° Chamfer bit, Straight bit 15/64", Rounding over bit 3/8", 90° "V" Grooving bit 1/2", Roman ogee bit 5/32", Straight bit 1/2", Straight bit 7/64", Cove box bit 1/4", Bearing cove box bit 1/4", Covetail bit 1/2", Rounding over bit 1/4", Straight bit 1/4", Bearing flute trim bit 1/2", Straight bit 5/8". different cutter types, work out a different effect.
• These router bits is truly versatile for your extra convenience. Suitable for woods, MDF, solid wood, particle board, plywood, wooden door frames, wooden window frames, wooden cabinets and boxes, etc.Avoid cutting ferrous metal and non wood materials, such as steel, iron and rock, etc.
• Comes with wooden index case for easy storage and organization. It is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels. This set also includes an allen wrench for removing bearings.

Product description

15-Piece Router Bit Set 1/4" Inch Shank Drill Bits Kit for Home Improvement Woodwork Tools

• 15-Piece Router Bit Set 1/4" Inch Shank Drill Bits Kit for Home Improvement Woodwork Tools
• All router bits have universal 1/4" shank, suitable for1/4" all models of routers, milling machines, woodworking machinery, tenon and various wood carvings. The 1/4" bits provide greater stability and less vibration during use.
• These router bits made from high-quality alloy blade, makes clean and accurate cuts on all types of wood with excellent resistance to heat. Hardened solid alloy steel main construction with power coating finish for durability and longevity.
• Comes with wooden index case for easy storage and organization. It is perfect for woodworking, edging, trimming, grooving, This is a carpenter's ideal choice.
• An inner hexagon wrench for bearing removal is also included.

• TAILORED SIZE--This wall holder fit the TP-Link Deco M5 Whole Home Mesh WiFi System perfectly ,NOTE:dose not fit Deco P7.
• EXCELLENT CORD MANAGEMENT--Wrap the cord around the reel and hide it perfectly on the back of the holder. It helps to save space and keep your house neat and clean, storage your WiFi router well;
• SECURE FIT--Unique anti-slip blue rubber gasket design makes the hook portion more fit to the wall plug, which secures your device on wall firmly, makes your device less-likely to be subject to messy spills or cord-related accidents.
• BETTER WiFi PLACEMENT AND MOBILITY--Provides WiFi router with better placement and keeps your TP-Link Deco M5 on the wall vertically, easy to move from room to room, make your life more convenient and comfortable.
• ELEGANT DESIGN and EASY TO USE--This wall mount is designed aesthetically that makes your TP-Link Deco M5 router an elegant home decoration, an essential router accessory that you must have! And there is no need other tools and installation accessories, super easy to use and won't hurt your wall absolutely.

User questions & answers

Question:	Can I use this on a power outlet that is horizontally installed instead of a vertical one shown in the pictures
Answer:	2 totally different products. The M5 is size of a large hockey puck. M9 is more like a canister
Question:	What's the size difference between the m5 & m9? It looks like this would fit
Answer:	Honestly, I am very impressed with the "holder" strong, sturdy, snug where it should be.
Question:	How is the quality of this holder?Who can help me ?thanks a lot
Answer:	My dear friend, we have no mounts for deco m9 at present, but you can pay attention to our store, we may sell it in the future, thank you for your attention .
Question:	will you eventually have these mounts for deco m
Answer:	There is no rabbeting bit. You would need to use one of the straight router bits and a straightedge or edge guide.

Product features

TAILORED SIZE

This wall holder fits the TP-Link Deco M5 WiFi Router perfectly and was designed well to hold the unit securely which can be mounted at bedroom, bathroom, kitchen, garages, office and more as long as there is a socket.

A Great Space Saver

Wrap the cord around the reel and hide it perfectly on the back of the holder. It helps to save space and keep your house neat and clean, storage your WiFi router well;

No Messy Wires and Screws

Easy to move from room to room, no messy wires and screws.

Better WiFi Placement and Mobilty

This bracket holder provides WiFi router with better placement and keeps your TP-Link Deco M5 on the wall vertically,no effect to the WiFi signal.

TAILORED SIZE

This wall holder fits the TP-Link Deco M5 WiFi Router perfectly and was designed well to hold the unit securely which can be mounted at bedroom, bathroom, kitchen, garages, office and more as long as there is a socket.

SECURE FIT

Unique anti-slip blue rubber gasket design makes the hook portion more fit to the wall plug, which secures your device on wall firmly, makes your device less-likely to be subject to messy spills or cord-related accidents.

NO MESSY WIRES AND SCREWS

It’s a great product for getting the TP-Link Deco M5 WiFi Router off of desk space, hides the cord well.

EASY INSTALLATION

Install in seconds without messy wires or screws, requires no tools or any other installation accessories;

ELEGANT DESIGN and EASY TO USE

This wall mount is designed aesthetically that makes your TP-Link Deco M5 WiFi Router an elegant home decoration, an essential router accessory that you must have! And there is no need other tools and installation accessories, super easy to use and won't hurt your wall absolutely.

Wall Mount for TP-Link Deco M5---- Elegant Home Decoration

This Sturdy Wall Mount is designed for TP-Link Deco M5 1 Pack/2 Pack/3 Pack, easy to install and use, requires no tools and any other accessories, hides the messy wires well,a great space saver for your cozy home, makes your life more convenient and comfortable!

Product description

At a whopping 29,000 RPM, this cordless router from Ryobi will help you with your specialty woodworking projects, either around the home or on the professional jobsite. The easy-grip rubber coating allows you to handle this in the most slippery of conditions, making precise cuts or bit changes with ease. Don’t worry about having to break out an Allen wrench or other tool to adjust your cutting depth, either. An onboard knob does that job for you, making your job that much more simple. It has ID markings, too, so you can tell the exact depth of your current project. It’s compact, too, so handling will be easy, especially on smaller projects. Plug in one of Ryobi’s 18v batteries, and you’ll be good to go on any number of jobs. With Ryobi, you can be sure that the job will be done right.

• LED LIGHTING: A set of LED lights onboard this unit allow you to see your project clearly in less than optimal lighting conditions
• GRIPZONE OVERMOLD: Maintain a firm grip with the rubber coating that allows precision handling, even in slippery conditions
• DEPTH ADJUSTMENT KNOB: Don’t worry about having to use a tool; fine tune the depth of your cuts with the onboard, easy-to-use knob
• ALUMINUM BASE: This sturdy base will keep this compact power tool stable while you perform a variety of tasks around the home or jobsite
• ONE+ COMPATIBLE: A variety of Ryobi 18V lithium ion batteries are compatible with this tool. Compatible battery models include the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	Can you use a plunge base for compact router with this
Answer:	I guess so
Question:	Can you use a plunge base for compact routers
Answer:	I don’t think so, unfortunately. However dewalt just came out with a cordless compact router that can be used with the compact router plunge base. I know it’s a whole different battery but it’s the best alternative
Question:	Where is the link to purchase the battery and charger? I could not find it. I read it is a bare tool
Answer:	The one I bought was just the router also. My husband is a general contractor and had the battery and charger. I just went into Amazon and typed in Ryobi 18volt battery. Amazon has a good selection of batteries. You will need to buy the green color battery. I bought a Ryobi charger from Amazon last year, so I know they offer the charger, also. Another option is homedepot.com. Home Depot carries a large assortment of Ryobi tools and accessories . I hope this helps.
Question:	How many ah 18v battery does the ryobi one+ trim router works with? does it works with 18v 4ah battery
Answer:	Yes, one 18V battery. Works fine with 4AH. The AH rating tells you how much power it can store - that is, the higher the AH, the longer the tool will work before you need to recharge.

Product description

The Bosch 2.25 HP plunge and fixed-base router kit is a versatile kit for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting. You can also use it with a router table. The kit features a 25, 000 RPM, 12 amp motor that delivers the power needed for smooth routing. Case type: Hard plastic.

Handle a broad range of routing applications with the versatile Bosch 1617EVSPK Plunge and Fixed-Base Variable-Speed Router Kit. This router kit includes a powerful motor with advanced speed control technology, precision bases, and plenty of advanced features to help get a variety of jobs done quickly and accurately.

• Versatile: This versatile kit can be used for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting; Making it one of the most widely used routers for wood working
• Durability: Aluminum construction makes this one of our most durable wood routers yet with wooden handles on a fixed base and a soft grip handle on a plunge base
• Ease of use: Rounded hardwood handles maximize user control
• Convenient: With the built in constant response circuitry, our 1617EVSPK wood router will maintain a constant speed throughout the cut, so you get cleaner, more accurate results
• Kit contents: Includes a plunge base, fixed base, 1/4 inch and 1/2 inch collet chucks, shaft wrench, collet nut wrench, chip shields and carrying case

User questions & answers

Question:	Why buy this one over the Dewalt 2.25hp kit? The Dewalt is $40 more, and usually Bosch is more expensive than Dewalt
Answer:	Hi, Peter. Thank you for your question about GoodSense Tussin DM. This product does not contain alcohol. If you would like additional information, please let us know and we would be happy to further assist you.
Question:	I read in one of the reviews, (current review) this router comes with a kit including carrying case, circle jig and an edge guide. Is this correct
Answer:	Yes, it can be shipped anywhere -- I think.
Question:	Is this product compatible with the bosch router table
Answer:	It is a two pack
Question:	if i were to mount this to a table, does this router provide a height adjustment from above the router table
Answer:	it depends what your description of natural is. None the less its tastes like any typical cold syrup medicine although i would recommend to go with the cherry or berry flavor they work just as well with out the bad taste. The original flavor can be harsh especially for kids and young adults.

Product features

Bosch 12 Amp 2-1/4 Combination Horsepower Plunge and Fixed Base Variable Speed Router Kit 1617EVSPK with 1/4-Inch and 1/2-Inch Collets

Variable speed dial, soft-start, maintains constant speed under load, quick clamp system on both bases, includes fixed base with system for adjusting bit height from above a router table, precision centering makes it easy to keep bit on intended cutline when using jigs, templates, dovetail fixtures and similar guidance devices, fixed base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern, microfine, bit, depth adjustment system on both bases, wide base openings and 2" sub-base openings and provides better visibility, right or left.

Top tier Power

Among the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8,000-25,000 RPM. The wood router’s advanced speed-control technology monitors and maintains desired RPM for consistent performance.

Flexibility

The hand router’s variable speed dial allows you to set the optimal speed for the routing task and material. Base Diameter: 6 inches Fixed/ 6-11/16 inches. Rounded hardwood handles maximize user control.

Durable and Comfortable

The motor housing and bases are made of aluminum, and the power switch is completely dust-sealed for added durability. This router is backed by a one-year limited warranty, 30-day money-back guarantee, and one-year service protection plan.

Accurate

This versatile kit provides all the components necessary for fixed-depth routing. Microfine bit-depth adjustment on the base, with an overall range of one inch and accuracy to 1/64 inch, allows for accurate and fast changes.

Product description

The Bosch GKF125CE Colt variable-speed palm-grip router with 1.25 horsepower (max) lets you feel the power in your hand. This Bosch Colt Palm Router has an ergonomic palm-grip design with soft-grip to make it very comfortable to hold, making it typically more convenient to use than larger routers. But it also has ample power, with a 1.25 HP (max) rating. Far more than a laminate trimmer, it’s the ideal tool for rounding-over deck planks and railings, hinge mortising, decorative edge forming, slot cutting, window cutouts, decorative inlays, laminate trimming and more. The motor features soft-start circuitry, a variable-speed dial and Constant Response circuitry to maintain speed under load. Its PR101 fixed base features macro- and micro-fine depth adjustment and a centerable round subbase for easy guidance. The GKF125CEN Colt Palm Router package includes the router, self-releasing collet chuck and a comfortable forged collet chuck wrench.

• Ease of use: Revolutionary new woodworking depth adjustment system for easy and precise depth adjustment
• Power: Featuring a 1.25-Hp, 7.0 amp motor for compact versatility with speeds of 16,000-35,000 RPM
• Convenience: Wide-bit capacity - fixed base accepts bits up to 1-5/16-in wide
• Consistency: Constant response circuitry - monitors and maintains speed under load for consistent performance - provides overload protection and soft start for reduced start-up torque
• Comfort: Palm-grip design with soft grip and finger support pockets - provides exceptional comfort and control

User questions & answers

Question:	I need to replace my colt router in my shark cnc does this router have the same body size to fit
Answer:	No, the GKF125CE and the PR20EVS are not the same diameter. With the increase in power in the GKF125CE, the motor is bigger.
Question:	Collet size
Answer:	1/4" collet!
Question:	No edge guide? Is there one for this model
Answer:	Thank you for your question. You can use PR102 Straight edge guide for the GKF125CEN Colt Router. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Will the plunge base and other accessories that fit the previous Colt palm router, fit on this model
Answer:	The GKF125CEN has an ergonomic palm-grip design with soft-grip to make it very comfortable to hold, making it typically more convenient to use than larger routers. The depth adjustment system has also been redesigned, these new features prevent this router from working with the previous Colt (PR10/PR20) plunge base. We offer the PR111 plunge base which is compatible with the GKF125CEN.

Product description

Product Description The Triton TRA001 has a powerful 3.25 HP motor, able to handle even the toughest workpieces with the motor running at 8000 -21000 RPM's. It features a wide range of premium features: Easy-set, direct reading, 3-stage turret for precise preset cut depths. Single button switches from plunge to fixed-base router with rack and pinion height adjustment. Through base, single wrench, bit change is achieved with automatic spindle lock. Soft start and variable speed lets you select the perfect speed for all cutter types. Micro Winder enables continuous fine depth adjustment through the full plunge range. Safety switch shutter locks closed in bit change mode to prevent power-on. Multi-Function fence provides excellent control for handheld use and circle cutting. Automatic spindle lock engages only when the power switch is closed. Removable plunge spring allows easy bit adjustment when table mounted. Fully enclosed guarding provides maximum protection from the cut zone. Side air vents reduces intake of dust into the motor casing when mounted upside-down in a router table. Quick Access to change worn brushes. Kit Includes: 3.25 HP Router, multi-function fence, a 1/2-Inch collet with a 1/4-Inch reducer, collet wrench, and a straight bit. From the Manufacturer Established in 1976, Triton Precision Power Tools designs and manufactures a wide range of power tools primarily aimed at the expert woodworker. From award-winning, innovative routers, sanding products and circular saws, to the ground-breaking SuperJaws and the original Triton Workcenter, Triton has a history of innovative design, which is responsive to the needs of woodworking professionals and enthusiasts alike. Set Contains: TRA001 Router Table height winder 1/2" collet 1/4" collet Multi-function fence Collet wrench

From the Manufacturer

Established in 1976, Triton Precision Power Tools designs and manufactures a wide range of power tools primarily aimed at the expert woodworker. From award-winning, innovative routers, sanding products and circular saws, to the ground-breaking SuperJaws and the original Triton Workcenter, Triton has a history of innovative design, which is responsive to the needs of woodworking professionals and enthusiasts alike.

Set Contains:

Table height winder

1/2" collet

12mm collet

Multi-function fence

Collet wrench

• Single button switches from conventional plunge to fixed-base router with rack and pinion mode
• Through base, single wrench bit change is achieved with automatic spindle lock
• Micro winder enables continuous fine depth adjustment through the full plunge mode
• Soft start and variable speed provides the perfect speed for all cutter types
• Side air vents reduces intake of dust into the motor casings

User questions & answers

Question:	It says it comes with 1/4 inch and 12 mm collets. But the manufacture says it comes with 1/4 and 1/2 inch colltes. which is correct
Answer:	Yes you can. http://www.amazon.com/Triton-TGA001-Router-Template-TRA001/dp/B0000950Q5
Question:	Can you get router bushing's for this router
Answer:	It will handle 1/2" and 1/4" shank bits. I've used 3 1/2" raised panel bits in it with no problems, athough I did those cuts in 2-3 passes. Regardless of the router, a full cut with those bits is not recommended anyway.
Question:	what is the largest bit you can use
Answer:	Yes, it does come with the micro-adjust winder. It requires an additional hole to be drilled in the router table to accommodate it but it makes adjustments so much easier than fiddling around under the table. It also comes with the straight edge guide and the collet wrench.
Question:	Does it come with the winder, for adjustments above the table? Do I buy the winder separately
Answer:	Yes you can. The only difference is the unit would be placed on the wall in a different orientation. Rather than side to side it would be up to down or vice versa.

Product features

Triton TRA001 3-1/4 HP Dual Mode Precision Plunge Router with Built-In Router Lift

The Triton TRA001 Router is the most versatile tool in the precision woodworker’s armory. Total control is guaranteed with patented precision engineering.

KEY SPECS

• 110-120V
• 3 1/4 Horsepower Motor
• 8000-21000 RPM
• 1/2" & 1/4" Collet
• Plunge range 0 - 2 3/5"
• Dust Extraction
• Weighs 14.33 lbs

Versatile

Use as hand-held or table-mount, change is easy.

• Single Button Switch from conventional plunge to fixed-base router with rack and pinion mode.

When table mounting:

• Quick-Fit Pins at the base allow for rapid fitment to the mounting plate.
• Removable Plunge Spring allows for easy bit adjustment.

Easy to Use

• Built-in Router Lift makes for effortless bit changes.
• Bit Change is easily achieved through the base with a single wrench.
• Automatic Spindle Lock engages for safe bit changes.
• Easy Access Brushes make changing when worn a breeze.

Performance Ready

• Powerful 3 1/4 HP Motor glides through the toughest timber with precision.
• 3-Stage Turret with direct reading scales ensures precise preset cut depths.
• Side Air Vents reduce intake of dust into the motor casings for smooth operation.
• Fully Enclosed Guard assists in dust extraction.

Always Safe

• Fully Enclosed Guard provides maximum protection from the cut zone.
• Safety Switch Shutter locks closed in bit-change mode to prevent power on.
• Automatic Spindle Lock engages only when the power switch cover is closed and during bit changes.

Product description

Route and smooth even demanding hardwoods with the 1-3/4 horsepower DEWALT DW616 fixed base router, which provides a micro-fine depth adjustment ring provides for precise depth adjustments in 1/64-inch increments. And the adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking. Do not hand-hold the router in an upside-down or horizontal position

From the Manufacturer

Powered by an 11 amp motor, this fixed base router features the micro-fine depth adjustment ring which provides precise, quick depth adjustments in 1/64-inch increments and constant switch and cordset location. An adjustable, tool-free motor cam lock and quick release motor latches provide easy depth change, quick motor pack removal and solid base locking. Precision-machined die-cast aluminum base; nickel-plated, die-cast aluminum motor housing; detachable cordset; dust-sealed switch; and a clear, Lexan sub-base provide enhanced durability. Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control. Part of an interchangeable router system of two motor packs and three bases: fixed, plunge, and D-Handle. Includes 1/2-inch and 1/4-inch one-piece, self-releasing collets, two wrenches, and a concentricity gauge to ensure bit to sub-base centering.

• 1-3/4-hp, 11-amp motor provides the power to rout smoothly through the toughest hardwoods
• Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments
• Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking
• Quick-release motor latches for fast and easy motor pack removal for bit and base changes
• Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy

User questions & answers

Question:	Does this dewalt router have a light to allow you to see the work area better while the machine is running
Answer:	No it has no light.
Question:	Hello good days I need all that weighs this article to be able to square the cost of sending towards venezuela
Answer:	Hola! El router pesa 10 libras ... eso si, no se si hacen envíos a Venezuela. Debes verificar con Amazon. Saludos desde Puerto Rico!
Question:	can this model be used in router table (no dust protection
Answer:	yes I put mine in a stand wright away works great. Thanks DavidA
Question:	What will the 2.25 HP Dewalt router do that this will not? Differences
Answer:	Well it depends a lot on what purpose you are using it for. The HP claims are pretty much worthless as both will be equal in terms of mid-size routing. The major flaw the 2.25HP (DW618. I'll refer to it as "618". Whereas this is the DW616... SO, "616") has is it cannot be used in an upside down router table without blowing up bearings in it. THE 616 is fine in a table. Also, the 616 has a quick start vs 618 which is a slow start. This means the 616 is running full speed at start, while the 618 starts slow and takes a second or two to build up speed. Both have advantages, and disadvantages. The BIGGEST issue for myself and others is that the 618 motor has... well... fire problems. Lol. That motor does not like extended use and with eat up brushes like mad. The 616 might have a bit less power, but its basically unnoticeable if you are using good sharp bits. Most importantly... the 616 (the "weaker" of the 2) tends to handle a lengthy runtime without catching fire lol. Personally, I prefer the 616 when it comes to mid-range routers. It has plenty of power, even with hardwoods, and larger bits. If you are planning on closing giant bits, or surface planing, I'd recommend neither and point you to a larger plunge base style of router with much greater strength, but a much higher weight.

Product features

DW616 Fixed Base Router

1-3/4 HP (maximum motor HP), 11.0 amp motor provides the power to rout smoothly through the toughest hardwoods.

Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.

Detachable cordset offers cordset serviceability and removes the need for a 'shorty' cord motor pack.

Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings.

Dust-Sealed Switch protects against dust ingestion for longer switch life.

Nickel plated motor housing for a smooth, long-lasting depth adjustment.

Fixed Base Router

Flat top for easy bit and depth changes.

Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location.

Quick release motor latches for fast and easy motor pack removal for bit and base changes.

Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy.

Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control.

Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight.

Right or left switch and cordset location provides the ability to have the switch in your right or left hand.

Product description

Makita's powerful 1-1/4 HP (maximum) Motor Delivers Improved Performance. The variable speed control dial (10,000 - 30,000 RPM) enables user to match the speed to the application. Our smooth rack-and-pinion fine depth adjustment system for more precise settings. It features a slim and ergonomically designed body for increased comfort and control. It has a Quick release cam lock system for easy depth adjustments and base removal/installation The Electronic speed control maintains constant speed under load. It also has a Soft start feature for smooth start-ups. The Fixed base accepts industry standard template guides for convenience. It has a high visibility base design for improved handling and the performance base can be removed quickly to install other bases. The Heavy duty aluminum motor housing engineered for increased durability. The shaft locks for quick and easy bit changes. Its durable flat top design is added for convenience when changing bits. It has a non-marring high-durability base insert for increased work piece protection. It also has Easy-to-read depth scales Uses 1/4" shank router bits Double insulated.

• Variable speed control dial (10,000 to 30,000 RPM) enables user to match the speed to the application
• Smooth rack and pinion fine depth adjustment system for more precise settings
• Slim and ergonomically designed body for increased comfort and control
• Quick release cam lock system for easy depth adjustments and base removal/installation
• Electronic speed control maintains constant speed under load
• Soft start feature for smooth start ups
• Fixed base accepts industry standard template guides for convenience

User questions & answers

Question:	can you set this up for a table router
Answer:	My short answer would be yes. I'm not sure whether there are commercially available tables for it, though. You may have to build one yourself.
Question:	What is the set of drill bits should I buy for this tool. I bought the MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks and are n
Answer:	This is a 1/4" collet router. If you want to use 3/8" (new to me) or 1/2" get a 1/2" router. I've used routers for 45 years. Own a 1/4" and two 1/2" Here's a quick guide: 1/4" router is the most widely useful, can be held in one hand for quick work, your arm doesn't get tired as fast as with a larger router. This one is good for hinge guides and door installs, laminate trimming (laminate trim bits with bearings), round over of the edges of boards or plywood. Makes a neat no slivers edge, get 1/2", 3/4" diameter cove bits (these will make 1/4 and 3/8" from the edge curves) I get these with bearings as well. (If you want less of a curve, use less depth, the curve is not symmetrical--no one will care. This is what I usually grab my 1/4" router for (I've got a Porter Cable 1/4" that's 40 years old. Can't figure out how to take it apart to replace the cord. Rather than a $60 trip to the tool repair I'm thinking of this one, vacuum dust collection is a plus). Shelf dados, usually 1/2 to 3/4" wide, is best done with a more powerful 1/2" router, but you can get by with this with two passes (overlapping) of a 1/2" straight bit. Plunge routing: always use dust collection. Freehand scroll work: 1/8 or 1/4" round bits- I don't do this, others do. If you don't yet have a router, or a specific shop need, get a 1/4". If you think you need one of those $400 router tables: don't. Make your own or buy a jointer. Figuring out how to make a router table will teach you about making jigs (you can make a fence that has finer adjustment than the fanciest most expensive one on the market) Direction of working. There's a correct direction to running a router along the edge of a board. With plywood, pine, fir, spruce, etc.. going the correct way can rip out long splinters. If you first make a very shallow pass in the 'wrong' direction to knock off the edge, then go normal depth in the correct direction, you can avoid this. (I still don't know if I want this router or not. There were 6 opened and reclosed boxes (returns?) at the Home Depot. Why?)
Question:	can it be used for wood doors and frames for hinges
Answer:	Yes, but it is a much better used as router than a door or frame hinge.
Question:	Can I trim my toe nails with it
Answer:	I definitely would use a flush trim bit. A round over or rabbiting bit might be too much. IMO

Product features

Versatile Kit

The 1-1/4 HP Compact Router Kit (model RT0701CX7) delivers performance, versatility and precision in a compact size. With a full 1-1/4 maximum horsepower and a plunge base included in the kit, the RT0701CX7 is engineered for a full range of precision routing applications.

The RT0701CX7 has a powerful 1-1/4 HP (maximum horsepower) motor with a variable speed control dial (10,000-30,000 RPM) that enables the user to match the speed to the application. Additional performance features include electronic speed control to maintain constant speed under load, and soft start feature for smooth start-ups. The RT0701CX7 is double-insulated with a heavy-duty aluminum motor housing for increased durability.

The RT0701CX7 is engineered for precision and includes a smooth rack-and-pinion fine depth adjustment system and easy-to-read depth scales for more precise settings. The quick release cam lock system is designed for easy depth adjustments and base removal/installation, with a high-visibility base design for improved handling and performance.

Additional features include a slim and ergonomic design that weighs only 3.9 lbs., with a durable flat top design for added convenience when changing bits. The base can be removed quickly to install other bases, and the shaft lock is engineered for quick and easy bit changes (uses ¼” shank router bits).

Includes:

The kit includes a plunge base needed for a range of routing applications. The plunge base has a full 0” – 1-3/8” plunge depth capacity, and an easy-to-use fine depth adjustment with 3 preset depth stops. The router accepts industry standard template guides for added versatility.

-1-1/4 Hp* Compact Router (RT0701C).

-1/4" Collet (763637-1).

-Plunge Base (195563-0).

-Straight Guide (164834-6).

-Spanner Wrench (781039-9).

-Spanner Wrench (781011-1).

1 Year - 30 Day Warranty

Every Makita product is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Certain products referenced below have longer warranties. Should any trouble develop during the one-year period, return the Complete product, freight prepaid by user, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge.

These warranties do not apply to Makita Accessories or where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. With regard to Pneumatic Nailers, normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The tool has been abused, misused, improperly maintained or operated. With regard to Pneumatic Nailers, improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting. With regard to Lithium-Ion Tools, improper operation includes the use of a non-genuine or 'knock-off' battery on a Lithium-Ion Tool or Charger. With regard to Laser Instruments, abuse includes liquid damage or physical damage caused by impact.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold under these warranties, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose' after the expiration of any express warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.