14 best dremel rotary tool

Product description

The Dremel 4300 is the first Dremel rotary tool to allow tool-less and collet-less accessory changes with the inclusion of the three-jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all-new pivot light, your projects are well-lit with an optimum line of sight since the light pivots to direct illumination where you want it. Experiencing the full range of Dremel rotary tool applications is easier than ever because the 4300 offers our most powerful motor with built-in variable speed and electronic feedback circuitry. And the slim, ergonomic body design provides a comfortable 360-degree grip zone No matter how you hold it for extended ease of use. The completely redesigned airflow system lets the Dremel 4300 run cool, quiet, and smooth so completing projects are more enjoyable than ever.

• Premium rotary tool kit - Includes 4300 high performance rotary tool, 5 attachments, 40 high-quality Dremel accessories, and plastic storage case.
• High performance motor – Our most powerful motor delivers maximum performance even in the most demanding applications.
• Variable speed - 5, 000 – 35, 000 RPM with electronic feedback for consistent performance & accurate tool control
• Universal 3-jaw chuck - Allows the use of all Dremel accessory shank sizes making it compatible with the entire line of our high-quality accessories.
• Pivot light - Rotates to illuminate your projects even in difficult to reach spaces
• Innovated air flow system - Ventilation mechanism helps prevent heat build-up for smoother, cooler, and quieter operation
• Replaceable brushes – Motor brushes can be replaced to extend tool life

Product features

Grinding/Sharpening

Restore your furniture & appliances by removing rust or sharpen your tools so they’re like new again

SANDING

Sand, smooth, shape or grind wood and fiberglass for clean finishes or surface prep

Intricate, Detailed Work

Whether its engraving soft or hard materials, Dremel offers the right accessory for all applications

CUTTING

The versatility of a rotary tool allows you to cut just about any material with the right accessory

Cleaning/Polishing

Put the sparkle on your projects & clean tough-to-reach areas on a variety of materials

Product description

The Dremel 8220 variable-speed cordless rotary tool offers the highest performance and versatility of all Dremel cordless rotary tools. The strength of its motor facilitates maximum performance at all speed levels. The ability to use all existing Dremel accessories and attachments let the Dremel 8220 complete a wide range of projects. A slim ergonomic body provides a 360-degree grip zone for control in any position. Powered by 12VMAX Lithium-ion battery technology, the Dremel 8220 has a 33-percent longer run-time than the Dremel 8200 cordless rotary tool when cutting screws. Speed range: 5,000 - 35,000 RPM. Total number of pieces - 31.

• Compact, portable, & powerful: 12V Lithium-Ion battery provides maximum performance and run time at all speeds (5,000-30,000 RPM).
• Versatile rotary tool kit: Includes 8220 cordless rotary tool, 1 attachment, 28 high-quality Dremel accessories, charger, plastic storage case, and accessory case.
• Quick accessory changes – Patented EZ twist nose cap makes accessory changes fast and easy without the need of a wrench
• Removable li-ion battery: Always ready with no memory effects. Charges in one-hour.
• Slim & ergonomic body – 360-degree grip zone & lightweight design allows you to work comfortable in tight spaces.
• Accessory & attachment compatible: Accommodates all dremel rotary accessories & attachments for thousands of applications. Kit includes multipurpose cutting guide attachment.
• 2 year warranty & USA-based customer service – Available by chat, email, phone or visit us at our service center in Racine, WI.

Product features

GRINDING/SHARPENING

Restore your furniture or appliances by removing rust or sharpen your tools so they're like new again. Grinding stones, sharpen & deburr non-ferrous material like stone, glass, ceramic & porcelain.

Shaping, surface prep

Sand, smooth, shape or grind wood and fiberglass for clean finishes or surface prep.

CARVING/ENGRAVING

Use high speed cutters for soft metal, plastic, & wood, and Tungsten carbide cutters for hard metals

CUTTING

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, hard materials (such as marble, concrete, brick, porcelain, ceramics and hard epoxy), drywall, tile, grout, and much more.

CLEANING/POLISHING

Put the sparkle on your projects & clean tough-to-reach areas on a variety of materials.

Product description

The 4000 variable speed rotary tool offers the highest performance and most versatility of all Dremel rotary tools. The increased strength of its motor plus electronic feedback circuitry delivers consistent performance at all speeds. The slim ergonomic body provides a 360-degree grip zone for control in any position and the separate on/off switch and variable-speed dial allows convenient speed adjustment and maintains a selected speed. It uses all Dremel accessories.

• VERSATILE ROTARY TOOL KIT: Includes 4000 corded rotary tool, 6 attachments, 50 high-quality Dremel accessories, deluxe carrying case, and accessory case.
• HIGH PERFORMANCE MOTOR – Provides maximum power and performance at all speeds.
• VARIABLE SPEED: (5,000 – 35,000 RPM) and electronic feedback circuitry for consistent performance even in the most demanding applications.
• INNOVATED AIR FLOW SYSTEM - Ventilation mechanism helps prevent heat build-up for smoother, cooler, and quieter operation
• SLIM & ERGONOMIC BODY – 360-degree grip zone for added comfort & grip during extended use.
• SEPARATE ON/OFF SWITCH & SPEED DIAL – For the perfect speed every time.
• 50 VERSATILE ACCESSORIES INCLUDED: Ideal for DIY or crafting projects like detail sanding, grinding, cutting, carving, variable speed polishing, and drilling.

User questions & answers

Question:	what does the 6/50 mean behind the dremel
Answer:	I think it means it has 6 options(carving, cutting, grinding/sharpening, cleaning/polishing, sanding, collets/miscellaneous) and 50 accessories(bits and parts). I'm not 100% sure.
Question:	Will this model accept the keyless chuck
Answer:	Yes, it installs just like any other insert. Bear in mind, you may not be able to tighten the accessory tips as tight with only hand tightening. Also, some users say they get a slight wobble effect. Some say they have to tighten with pliers which defeats the purpose of quick change. For others it works fine.
Question:	What do the numbers on the Dremel rotary mean such as 4000 6/50 vs
Answer:	Dremel 4000-6/50 120-Volt Variable-Speed Rotary Tool with 50 Accessories What do the numbers on the Dremel rotary mean such as 4000 6/50 vs 3/32?
Question:	why doesn't it list what the 50 accessories are? I would like to know what are included as accessories
Answer:	Home Depot no longer lists the attachments and accessories, although this site does: https://www.highlandwoodworking.com/dremel-400-650-high-performance-rotary-tool-kit.aspx It is a shame that the Dremel website does not list the attachments and accessories for the products they sell. Worse yet, the link for this product promotes two "Attachments For The Dremel 4000-6/50" with links for buying them when both attachments are already included (something I only know for sure because mine arrived yesterday). It is a real shame that a company with the reputation of Dremel provides such vague and, in some cases, misleading information about their products on their website. I have registered this complaint with Dremel and hope they will respond.

Product features

Carving/Engraving

Whether for carving or engraving soft or hard materials, Dremel offers the right accessory for every application. Use high speed cutters for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Tungsten carbide cutters are recommended for shaping, smoothing and material removal on hard materials such as stainless steel and cast iron. A variety of engraving cutters suitable for both soft and hard materials are also available to tackle every project.

Cutting

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, hard materials (such as marble, concrete, brick, porcelain, ceramics and hard epoxy), drywall, tile, grout, and much more.

Cleaning/Polishing

Put the sparkle on your projects by using a cleaning or polishing accessory. Whether your application requires light-duty de-burring or heavy-duty material removal, Dremel has the perfect accessory for the job.

Grinding/Sharpening/Sanding

Restore your furniture or appliances by removing rust and polishing metals by using a grinding or sharpening accessory. For non-ferrous materials such as stone, glass, ceramics and porcelain, use silicon carbide grinding stones to tackle your projects. Provide clean finishes or prep surfaces by using a sanding accessory.

1.6 amp with Electronic Feedback

Superior performance that auto adjusts power and speed as needed.

EZ Twist

Integrated nose cap wrench allows for fast accessory changes.

Variable Speed

For maximum accessory versatility and precise tool control.

Accessory and Attachment Compatibility

Can be used with all Dremel rotary tool accessories and attachments.

What's in the box? Dremel 4000-6/50

Flex Shaft Attachment, Circle Cutter/Straight Edge Guide, Sanding/Grinding Guide, Multipurpose Cutting Guide, Shield Attachment and Lawn Mower and Garden Tool Sharpening Attachment.

Accessories

- Carving/Engraving: 107 Engraving Cutter, 191 High Speed Cutter, 194 High Speed Cutter.

- Cutting: 420 Cut-off Wheel (x4), EZ409 EZ Lock 1-½ inch Thin Cut Cut-off Wheel (x2), EZ456 EZ Lock 1-½ inch Cut-off Wheel (x2), EZ476 EZ Lock 1-½ inch Cut-off Wheel (x2), 540 1-¼ inch Cut-off Wheel, 561 Multipurpose Cutting Bit.

- Grinding/Sharpening: 541 Aluminum Oxide Grinding Wheel (x2), 932 Aluminum Oxide Grinding Stone, 8193 Aluminum Oxide Grinding Stone, 84922 Silicon Carbide Grinding Stone.

- Cleaning/Polishing: 405 Nylon Bristle Brush, 428 Carbon Steel Brush, 442 Carbon Steel Brush, 421 Polishing Compound, 414 Felt Polishing Wheel (x3), 429 Felt Polishing Wheel, 423E EZ Lock Cloth Polishing Wheel.

- Sanding: 511E EZ Lock Finishing Abrasive Buffs 180 & 280-grit, 512E EZ Lock Finishing Abrasive Buffs 320-grit, 407 1/2 inch Sanding Drum, 408 1/2 inch 60-grit Sanding Band (x2), 432 1/2 inch 120-grit Sanding Band (x2), 445 1/2 inch 240-grit Sanding Band (x2), 411 3/4 inch 180-grit Sanding Disc (x2), 412 3/4 inch 220-grit Sanding Disc (x2), 413 3/4 inch 240-grit Sanding Disc (x2).

- Miscellaneous: 150 1/8 inch Drill Bit, 401 Screw Mandrel, 402 Mandrel, EZ402 EZ Lock Mandrel, 481 3/32 inch Collet, EZ Twist Nose Cap, Wrench.

Product description

The Dremel 3000 is the workhorse of the Dremel brand. New enhancements such as the EZ Twist integrated wrench nose cap accessory allows you to switch between accessories without the Dremel wrench. The 360-degree grip-zone improves balance and comfort while the improved venting and redesigned fan makes the 3000 run cooler and stay comfortable for longer duration jobs.

• Versatile rotary tool kit: Includes 3000 corded rotary tool, 2 attachments, 28 high-quality Dremel accessories, plastic storage case, and accessory case
• High performance 1.2amp motor – Provides maximum power and performance at all speeds
• 6 variable speeds provide greater control and maximum accessory versatility and precise tool control (5,000 – 35,000 RPM)
• Innovated air flow system - Ventilation mechanism helps prevent heat build-up for smoother, cooler, and quieter operation
• Slim & ergonomic body – 360-degree grip zone for added comfort & grip during extended use
• 28 versatile accessories included: Ideal for DIY or crafting projects like sanding, sharpening, grinding, cutting, carving, polishing, and cleaning
• 2 attachments included - A576 shaping platform and 565 multi-purpose cutting kit
• 2 year tool warranty & USA-based customer service – Available by chat, email, phone or visit us at our service center in Racine, WI

Product features

GRINDING/SHARPENING

Restore your furniture & appliances by removing rust or sharpen your tools so they’re like new again.

SANDING

Sand, smooth, shape or grind wood and fiberglass for clean finishes or surface prep.

CARVING/ENGRAVING

Whether it's engraving soft or hard materials, Dremel offers the right accessory.

CUTTING

The versatility of a rotary tool allows you to cut just about any material with the right accessory.

CLEANING/POLISHING

Put the sparkle on your projects & clean tough-to-reach areas on a variety of materials.

Product description

The Dremel 4000 variable speed rotary tool offers the highest performance and most versatility of all Dremel rotary tools. The increased strength of its motor plus electronic feedback circuitry enables consistent performance at all speed levels. Dremel 4000 can use all existing Dremel rotary tool accessories and attachments plus high-performance attachments to complete the widest range of projects. A slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position. Also included are 4 attachments and 34 accessories to get the most out of your Dremel 4000 rotary tool. Cool-running ball bearing construction for smooth and quiet operation

• VERSATILE ROTARY TOOL KIT: includes 4000 corded rotary tool, 4 attachments, 34 high-quality Dremel accessories, plastic storage case, and accessory case
• HIGH PERFORMANCE MOTOR – Provides maximum power and performance at all speeds. Variable speed (5,000 – 35,000 RPM) and electronic feedback circuitry for consistent performance even in the most demanding applications
• INNOVATED AIR FLOW SYSTEM- ventilation mechanism helps prevent heat build-up for smoother, cooler, and quieter operation
• SLIM & ERGONOMIC BODY – 360-degree grip zone for added comfort & grip during extended use
• SEPARATE ON/OFF SWITCH & SPEED DIAL – for the perfect speed every time
• 34 VERSATILE ACCESSORIES INCLUDED: Ideal for DIY or crafting projects like sanding, grinding, cutting, carving, polishing, and drilling.
• 4 ATTACHMENTS INCLUDED - Multipurpose Cutting Guide, Sanding/Grinding Guide, Circle Cutter/Straight Edge Guide, and Detailer’s Grip
• 2 YEAR WARRANTY & USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI

User questions & answers

Question:	Does this come with the bit to drill glass? We need to drill a hole in a wine bottle
Answer:	I ordered diamond bits for drilling holes in stone and I am pretty sure that is what you want for glass. Diamond bits.
Question:	Does this come with a bit to carve wood
Answer:	mine didn't it comes with a few things but not a lot but it is worth the price it is a very good tool I love mine
Question:	What is the power rating
Answer:	Hello, The 4000 tool is a 1.6 amp tool. It is 120 volt--50/60 HZ. It runs from 5,000 to 35,000 RPM. Hope this information helps and have a great day!
Question:	What do the fractions mean following the model number? Ex: 4200-4/36 or 4000-6/50; the 4/36 and 6/50 mean what, please
Answer:	I bought the Dremmel 4000 4/34. The 4/34 means it comes with 4 attachments and 34 accessories. The 4 attachments are: a Multipurpose Cutting Guide, a Sanding/Grinding Guide, a Circle Cutter/Straight Edge Guide and and a Detailer's Grip. The 34 accessories are various sanders, cutters, etc. Hope this helps.

Product features

Carving/Engraving

Whether for carving or engraving soft or hard materials, Dremel offers the right accessory for every application. Use high speed cutters for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Tungsten carbide cutters are recommended for shaping, smoothing and material removal on hard materials such as stainless steel and cast iron. A variety of engraving cutters suitable for both soft and hard materials are also available to tackle every project.

Cutting

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, hard materials (such as marble, concrete, brick, porcelain, ceramics and hard epoxy), drywall, tile, grout, and much more.

Cleaning/Polishing

Put the sparkle on your projects by using a cleaning or polishing accessory. Whether your application requires light-duty de-burring or heavy-duty material removal, Dremel has the perfect accessory for the job.

Grinding/Sharpening/Sanding

Restore your furniture or appliances by removing rust and polishing metals by using a grinding or sharpening accessory. For non-ferrous materials such as stone, glass, ceramics and porcelain, use silicon carbide grinding stones to tackle your projects. Provide clean finishes or prep surfaces by using a sanding accessory.

1.6 amp with Electronic Feedback

Superior performance that auto adjusts power and speed as needed.

EZ Twist

Integrated nose cap wrench allows for fast accessory changes.

Variable Speed

For maximum accessory versatility and precise tool control.

Accessory and Attachment Compatibility

Can be used with all Dremel rotary tool accessories and attachments.

What's in the box? Dremel 4000-4/34

Multipurpose Cutting Guide, Sanding/Grinding Guide, Circle Cutter/Straight Edge Guide and Detailer’s Grip.

Accessories

- Carving/Engraving: 107 Engraving Cutter, 191 High Speed Cutter.

- Cutting: 420 Cut-off Wheel (x2), EZ456 EZ Lock 1-½ inch Cut-off Wheel, 540 1-¼ inch Cut-off Wheel, 561 Multipurpose Cutting Bit.

- Grinding/Sharpening: 8193 Aluminum Oxide Grinding Stone, 84922 Silicon Carbide Grinding Stone, 85602 Silicon Carbide Grinding Stone, 932 Aluminum Oxide Grinding Stone.

- Cleaning/ Polishing: 403 Nylon Bristle Brush, 428 Carbon Steel Brush, 414 Felt Polishing Wheel (x3), 421 Polishing Compound, 429 Felt Polishing Wheel (x2).

- Sanding: 407 1/2 inch Sanding Drum, 408 1/2 inch 60-grit Sanding Band, 432 1/2 inch 120-grit Sanding Band (x3), 445 1/2 inch 240-grit Sanding Band (x3), 411 3/4 inch 180-grit Sanding Disc (x2), 412 3/4 inch 220-grit Sanding Disc, 413 3/4 inch 240-grit Sanding Disc.

- Miscellaneous: 401 Screw Mandrel, 402 Mandrel, EZ402 EZ Lock Mandrel, EZ Twist Nose Cap, Wrench.

Product description

The DREMEL 4000 variable-speed rotary tool kit offers the highest performance and most versatility of all DREMEL rotary tools. The increased strength of its motor and electronic feedback circuitry enables consistent performance at all speed levels. Ergonomics include a slim design that provides a 360-degree grip zone for added comfort and control. The DREMEL 4000 can use all existing DREMEL rotary tool accessories and attachments, as well as high-performance attachments, so you can do more with just one tool. Two year warranty.

• Versatile rotary tool kit: Includes 4000 corded rotary tool, 2 attachments, 30 high-quality Dremel accessories, plastic storage case, and accessory case
• High performance motor – Provides maximum power and performance at all speeds
• Variable speed (5,000 – 35,000 RPM) and electronic feedback circuitry for consistent performance even in the most demanding applications
• Innovated air flow system- Ventilation mechanism helps prevent heat build-up for smoother, cooler, and quieter operation
• Slim & ergonomic body – 360-degree grip zone for added comfort & grip during extended use

User questions & answers

Question:	I want a tool that is controllable to do fine carving on wood, bone and similar material. Is this the tool I want
Answer:	I have used the Dremel since 1990 to carve deer antler,through trial and error I found many ways to make this tool work for what I turned into a very successful art career and business although you will hear all about different carving moto tools that other carvers will claim are the best,bottom line for its bang and a buck the dremel moto tool is your diamond in the rough.
Question:	Does it have a small drill bit
Answer:	No. You can buy small bits separately, but this item doesn't include drill bits.
Question:	Does it have carrying case?? Thank you
Answer:	Yes Ralph, it has a sturdy carrying case and is molded inside to fit everything, so the accessories stay in their places when the unit is closed. It sits up by itself like a brief case for easy storage. The Dramel 3000 logo is embossed on the outside. Everything is functional after taking time to read the directions - a well-made unit!!! I wrap the cord in a little twine to keep it secure in the case. The instructions are clearly written, so take the time to become familiar with every phase of the unit. Enjoy!!
Question:	What flex attachment works with this model? The only one sold on Amazon lists several model numbers, but 3000 isn't one of them
Answer:	225-01 flex attachment will fit perfectly.
Question:	what does the 6/50 mean behind the dremel
Answer:	I think it means it has 6 options(carving, cutting, grinding/sharpening, cleaning/polishing, sanding, collets/miscellaneous) and 50 accessories(bits and parts). I'm not 100% sure.
Question:	Will this model accept the keyless chuck
Answer:	Yes, it installs just like any other insert. Bear in mind, you may not be able to tighten the accessory tips as tight with only hand tightening. Also, some users say they get a slight wobble effect. Some say they have to tighten with pliers which defeats the purpose of quick change. For others it works fine.
Question:	What do the numbers on the Dremel rotary mean such as 4000 6/50 vs
Answer:	Dremel 4000-6/50 120-Volt Variable-Speed Rotary Tool with 50 Accessories What do the numbers on the Dremel rotary mean such as 4000 6/50 vs 3/32?
Question:	why doesn't it list what the 50 accessories are? I would like to know what are included as accessories
Answer:	Home Depot no longer lists the attachments and accessories, although this site does: https://www.highlandwoodworking.com/dremel-400-650-high-performance-rotary-tool-kit.aspx It is a shame that the Dremel website does not list the attachments and accessories for the products they sell. Worse yet, the link for this product promotes two "Attachments For The Dremel 4000-6/50" with links for buying them when both attachments are already included (something I only know for sure because mine arrived yesterday). It is a real shame that a company with the reputation of Dremel provides such vague and, in some cases, misleading information about their products on their website. I have registered this complaint with Dremel and hope they will respond.

Product features

Carving/Engraving

Whether for carving or engraving soft or hard materials, Dremel offers the right accessory for every application. Use high speed cutters for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Tungsten carbide cutters are recommended for shaping, smoothing and material removal on hard materials such as stainless steel and cast iron. A variety of engraving cutters suitable for both soft and hard materials are also available to tackle every project.

Cutting

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, hard materials (such as marble, concrete, brick, porcelain, ceramics and hard epoxy), drywall, tile, grout, and much more.

Cleaning/Polishing

Put the sparkle on your projects by using a cleaning or polishing accessory. Whether your application requires light-duty de-burring or heavy-duty material removal, Dremel has the perfect accessory for the job.

Grinding/Sharpening/Sanding

Restore your furniture or appliances by removing rust and polishing metals by using a grinding or sharpening accessory. For non-ferrous materials such as stone, glass, ceramics and porcelain, use silicon carbide grinding stones to tackle your projects. Provide clean finishes or prep surfaces by using a sanding accessory.

1.6 amp with Electronic Feedback

Superior performance that auto adjusts power and speed as needed.

EZ Twist

Integrated nose cap wrench allows for fast accessory changes.

Variable Speed

For maximum accessory versatility and precise tool control.

Accessory and Attachment Compatibility

Can be used with all Dremel rotary tool accessories and attachments.

What's in the box? Dremel 4000-6/50

Flex Shaft Attachment, Circle Cutter/Straight Edge Guide, Sanding/Grinding Guide, Multipurpose Cutting Guide, Shield Attachment and Lawn Mower and Garden Tool Sharpening Attachment.

Accessories

- Carving/Engraving: 107 Engraving Cutter, 191 High Speed Cutter, 194 High Speed Cutter.

- Cutting: 420 Cut-off Wheel (x4), EZ409 EZ Lock 1-½ inch Thin Cut Cut-off Wheel (x2), EZ456 EZ Lock 1-½ inch Cut-off Wheel (x2), EZ476 EZ Lock 1-½ inch Cut-off Wheel (x2), 540 1-¼ inch Cut-off Wheel, 561 Multipurpose Cutting Bit.

- Grinding/Sharpening: 541 Aluminum Oxide Grinding Wheel (x2), 932 Aluminum Oxide Grinding Stone, 8193 Aluminum Oxide Grinding Stone, 84922 Silicon Carbide Grinding Stone.

- Cleaning/Polishing: 405 Nylon Bristle Brush, 428 Carbon Steel Brush, 442 Carbon Steel Brush, 421 Polishing Compound, 414 Felt Polishing Wheel (x3), 429 Felt Polishing Wheel, 423E EZ Lock Cloth Polishing Wheel.

- Sanding: 511E EZ Lock Finishing Abrasive Buffs 180 & 280-grit, 512E EZ Lock Finishing Abrasive Buffs 320-grit, 407 1/2 inch Sanding Drum, 408 1/2 inch 60-grit Sanding Band (x2), 432 1/2 inch 120-grit Sanding Band (x2), 445 1/2 inch 240-grit Sanding Band (x2), 411 3/4 inch 180-grit Sanding Disc (x2), 412 3/4 inch 220-grit Sanding Disc (x2), 413 3/4 inch 240-grit Sanding Disc (x2).

- Miscellaneous: 150 1/8 inch Drill Bit, 401 Screw Mandrel, 402 Mandrel, EZ402 EZ Lock Mandrel, 481 3/32 inch Collet, EZ Twist Nose Cap, Wrench.

Carving/Engraving

Whether for carving or engraving soft or hard materials, Dremel offers the right accessory for every application. Use high speed cutters for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Tungsten Carbide Cutters are recommended for shaping, smoothing and material removal on hard materials such as stainless steel and cast iron. A variety of engraving cutters suitable for both soft and hard materials are also available to tackle every project.

Cutting

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, marble, concrete, brick, porcelain, ceramics, hard epoxy, drywall, tile, grout, and much more.

Cleaning/Polishing

Put the sparkle on your projects by using a cleaning or polishing accessory. Whether your application requires light-duty de-burring or heavy-duty material removal, Dremel has the perfect accessory for the job.

Grinding/Sharpening/Sanding

Restore your furniture or appliances by removing rust and polishing metals by using a grinding or sharpening accessory. For non-ferrous materials such as stone, glass, ceramics and porcelain, use Silicon Carbide Grinding Stones to tackle your projects. Provide clean finishes or prep surfaces by using a sanding accessory.

EZ Twist

Integrated nose cap wrench allows for fast accessory changes.

Variable Speed

For maximum accessory versatility and precise tool control.

Accessory and Attachment Compatibility

Can be used with all Dremel rotary tool accessories and attachments (except MS400 and PL400 attachments).

1.2 amps

Equipped with a powerful and efficient 1.2-amp motor to deliver control for precision and detailed work.

What's in the box? Dremel 3000-1/24

Sanding/Grinding Guide

Accessories

Carving/Engraving: 191 High Speed Cutter

Cutting: 426 Fiberglass Reinforced Cut-off Wheel (x2)

Grinding/Sharpening: 85422 Silicon Carbide Grinding Stone, 932 Aluminum Oxide Grinding Stone, 952 Aluminum Oxide Grinding Stone.

Cleaning/Polishing: 403 Nylon Bristle Brush, 428 Carbon Steel Brush, 414 Felt Polishing Wheel (x2), 421 Polishing Compound, 429 Felt Polishing Wheel.

Sanding: 407 1/2 inch Sanding Drum, 408 1/2 inch 60-grit Sanding Band, 430 1/4 inch Sanding Drum, 432 1/2 inch 120-grit Sanding Band (x2), 445 1/2 inch 240-grit Sanding Band (x2), 438 1/4 inch 120-grit Sanding Band, 446 1/4 inch 240-grit Sanding Band.

Miscellaneous: 401 Screw Mandrel, 402 Mandrel, 415 Dressing Stone, Wrench.

GRINDING/SHARPENING

Restore your furniture & appliances by removing rust or sharpen your tools so they’re like new again

SANDING

Sand, smooth, shape or grind wood and fiberglass for clean finishes or surface prep

CARVING/ENGRAVING

Whether its engraving soft or hard materials Dremel offers the right accessory for every application

CUTTING

The versatility of a rotary tool allows you to cut just about any material with the right accessory.

CLEANING/POLISHING

Put the sparkle on your projects & clean tough-to-reach areas on a variety of materials.

Product description

A great addition to any toolbox or jobsite, The Dremel rotary tool is ideal for multiple applications and materials. The 2-Speed control allows you to set your speed at 15, 000 or 35, 000 RPM with just the flip of a switch. The cool running ball bearing construction ensures a smooth and quiet operation, while the lightweight design allows for increased comfort during prolonged use. Made to last, It features replaceable motor brushes, which extend the life of the tool. Extremely handy, The tool comes with the following accessories: Lawn mower and garden tool sharpener, high speed cutter, 401 Mandrel, 402 Mandrel, 407 coarse 1/2" Sanding drum, 408 coarse 1/2" Sanding band, 420 heavy duty Emery Cut-Off wheel, 421 polishing compound, 422 cone polishing tip, 425 Emery wheel, 426 1-1/4" Fiberglass-reinforced Cut-Off wheel, 429 large felt wheel, 432 1/2" 120 grit sanding band, 932 aluminum Oxide grinding Stone, 8193 aluminum Oxide grinding Stone, 83322 silicon carbide grinding Stone.

From the Manufacturer

The Dremel 200 Series rotary tool offers the precision and control required to complete a wide range of projects. Its two speed settings allow you to use the low speed setting for cleaning applications and using brush accessories and the high speed setting for routing, cutting and sanding applications.

• Includes assortment of accessories
• Choose between 15, 000 and 35, 000 RPM
• Designed for a smooth, quiet operation
• Lightweight construction allows for comfort during prolonged use

User questions & answers

Question:	Would this be a good model for drilling holes in sea glass and agate stone (semi-precious stones)? Or should I go with a different model like the
Answer:	The part that the bottle fits in moves. So I don't think you would have a problem.
Question:	Is this powerful enough to cut a notch in a screw head
Answer:	The cupholder can hold different size cup. I beliece it will accomodate the fan.
Question:	Do I need to get the chuck for this to use drill bits with it? And if so, which one
Answer:	I believe this will work for you, I used it on my fathers walker. As long as whatever you're using it on is round. Reference the picture. Worked great for me.
Question:	Will I be able to use the Dremel Flax Shaft 225-01 with this tool
Answer:	They can be attached to anything round, vertical or horizontal. As long as the diameter of the location is not too large.

Product features

GRINDING/SHARPENING

Restore your furniture & appliances by removing rust or sharpen your tools so they’re like new again

SANDING

Sand, smooth, shape or grind wood and fiberglass for clean finishes or surface prep

CARVING/ENGRAVING

Whether its engraving soft or hard materials Dremel offers the right accessory for every application

CUTTING

The versatility of a rotary tool allows you to cut just about any material with the right accessory.

CLEANING/POLISHING

Put the sparkle on your projects & clean tough-to-reach areas on a variety of materials.

Product description

The Dremel 3000 is the result of upgrading our most popular rotary tool using user-requested features to improve the tool's design and ergonomics. The tool also features the EZ Twist nose cap with an integrated wrench that allows the nose cap to be used as a wrench to tighten accessories and eliminates the need for a separate wrench. A more efficient fan design and side vents provide a cooler running tool making it comfortable for extended periods of use. The tool also features a symmetrical design including a trumpet-shaped nose cap to facilitate a pencil-grip tool hold. The ability to use all existing Dremel rotary tool accessories and most attachments let the 3000 complete a wide range of applications including cutting, grinding, sanding, carving and polishing a variety of materials. The Dremel 3000-1/25 Rotary Tool Kit includes: 1 Attachments, 25 Accessories, and a rugged storage/carrying case.

• VERSATILE ROTARY TOOL KIT: includes Dremel 3000 corded rotary tool, 1 attachments, 25 high-quality Dremel accessories, plastic storage case, and accessory case.
• HIGH PERFORMANCE 1.2AMP MOTOR – Provides maximum power and performance at all speeds.
• 6 VARIABLE SPEEDS provide greater control and maximum accessory versatility and precise tool control (5,000 – 35,000 RPM)
• INNOVATED AIR FLOW SYSTEM- ventilation mechanism helps prevent heat build-up for smoother, cooler, and quieter operation
• SLIM & ERGONOMIC BODY – 360-degree grip zone for added comfort & grip during extended use.
• 25 VERSATILE ACCESSORIES INCLUDED: Ideal for DIY or crafting projects like detail sanding, sharpening, grinding, cutting, carving, variable speed polishing, and cleaning
• 1 ATTACHMENT INCLUDED - A550 Shield
• 2 YEAR TOOL WARRANTY & USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.

User questions & answers

Question:	I want a tool that is controllable to do fine carving on wood, bone and similar material. Is this the tool I want
Answer:	No, the gun is not big enough for roofing staples.
Question:	Does it have a small drill bit
Answer:	No they are solid
Question:	Does it have carrying case?? Thank you
Answer:	They have a cooling gel inside to keep them cooler longer
Question:	What flex attachment works with this model? The only one sold on Amazon lists several model numbers, but 3000 isn't one of them
Answer:	Hey there! Yes, these bullets are reusable and dishwasher safe.

Product features

Carving/Engraving

Whether for carving or engraving soft or hard materials, Dremel offers the right accessory for every application. Use high speed cutters for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Tungsten Carbide Cutters are recommended for shaping, smoothing and material removal on hard materials such as stainless steel and cast iron. A variety of engraving cutters suitable for both soft and hard materials are also available to tackle every project.

Cutting

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, marble, concrete, brick, porcelain, ceramics, hard epoxy, drywall, tile, grout, and much more.

Cleaning/Polishing

Put the sparkle on your projects by using a cleaning or polishing accessory. Whether your application requires light-duty de-burring or heavy-duty material removal, Dremel has the perfect accessory for the job.

Grinding/Sharpening/Sanding

Restore your furniture or appliances by removing rust and polishing metals by using a grinding or sharpening accessory. For non-ferrous materials such as stone, glass, ceramics and porcelain, use Silicon Carbide Grinding Stones to tackle your projects. Provide clean finishes or prep surfaces by using a sanding accessory.

EZ Twist

Integrated nose cap wrench allows for fast accessory changes.

Variable Speed

For maximum accessory versatility and precise tool control.

Accessory and Attachment Compatibility

Can be used with all Dremel rotary tool accessories and attachments (except MS400 and PL400 attachments).

1.2 amps

Equipped with a powerful and efficient 1.2-amp motor to deliver control for precision and detailed work.

What's in the box? Dremel 3000-1/25

Shield

Accessories

Carving/Engraving: 191 High Speed Cutter

Cutting: 426 Fiberglass Reinforced Cut-off Wheel (x2)

Grinding/Sharpening: 85422 Silicon Carbide Grinding Stone, 932 Aluminum Oxide Grinding Stone, 953 Aluminum Oxide Grinding Stone.

Cleaning/Polishing: 428 Carbon Steel Brush, 414 Felt Polishing Wheel (x2), 421 Polishing Compound, 429 Felt Polishing Wheel (x2).

Sanding: 407 1/2 inch Sanding Drum, 408 1/2 inch 60-grit Sanding Band, 430 1/4 inch Sanding Drum, 431 1/4 inch 60-grit Sanding Band, 432 1/2 inch 120-grit Sanding Band (x2), 445 1/2 inch 240-grit Sanding Band, 438 1/4 inch 120-grit Sanding Band (x2), 446 1/4 inch 240-grit Sanding Band.

Miscellaneous: 401 Screw Mandrel, 402 Mandrel, 415 Dressing Stone, Wrench.

Product description

Includes: Forti-Flex 2. 5 Amp Stationary Flex-Shaft Precision Rotary Tool - 9100-21.

• Perfect unique Christmas or holiday gift for the DIYer in arts and crafts
• Engraver pen, detail sander, glass etcher, and mini polisher
• Powerful 2.5 AMP (1/5 HP) Motor provides high torque at low speeds
• Precision hand piece is engineered for control and comfort even with extended use
• Dremel quality with a Heavy Duty Flexible Shaft includes a patented bearing system for durability and cool operation
• Variable speed foot pedal allows you to match the speed with the application, hands-free
• Three-Jaw Chuck enhances versatility by accepting accessories from 0-Inches to 5/32-Inches
• Can be used with all Dremel rotary tool accessories

User questions & answers

Question:	Can this product be used to carve marble
Answer:	to answer your question, Do not wash your polishing cloth! The polishing treatment will get washed out. Whn they have a lot pills (like on a sweater), it's time for a new one.
Question:	Can you still cut metal with it lik a normal dremel
Answer:	These are packaged 20 to a bag
Question:	Is the motor loud
Answer:	Not sure I use them in copper and silver and they work well. I am thinking Gold will work also.
Question:	I am considering this tool... would this cut gemstone material? I am looking to shape rough before I begin to facet
Answer:	No, u will wash away the compound.

Product features

Carving/Engraving

Whether for carving or engraving soft or hard materials, Dremel offers the right accessory for every application. Use high speed cutters for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Tungsten Carbide Cutters are recommended for shaping, smoothing and material removal on hard materials such as stainless steel and cast iron. A variety of engraving cutters suitable for both soft and hard materials are also available to tackle every project.

Cutting

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, hard materials (such as marble, concrete, brick, porcelain, ceramics and hard epoxy), drywall, tile, grout, and much more.

Cleaning/Polishing

Put the sparkle on your projects by using a cleaning or polishing accessory. Whether your application requires light-duty de-burring or heavy-duty material removal, Dremel has the perfect accessory for the job.

Grinding/Sharpening/Sanding

Restore your furniture or appliances by removing rust and polishing metals by using a grinding or sharpening accessory. For non-ferrous materials such as stone, glass, ceramics and porcelain, use Silicon Carbide Grinding Stones to tackle your projects. Provide clean finishes or prep surfaces by using a sanding accessory.

Powerful 2.5 Amp (1/5 HP) Motor

Provides high torque at low speeds.

Precision Hand Piece with Flexible Shaft

Engineered for control and comfort even with extended use, the hand piece with flexible shaft provides durability and cool operation. Additionally, the hand piece is interchangeable with other flex shaft tool hand pieces to provide you with more options for comfort, as well as allowing you to use any existing hand pieces that you’ve already invested in.

Variable Speed Foot Pedal

Allows for variable speed control hands-free for ultimate precision.

Three-Jaw Chuck

Enhances versatility by accepting accessories with a shank size up to 5/32-inch (4.0 mm). This ability to accommodate many sizes of bits lets you use a wide variety of accessories to accomplish numerous applications.

What's In The Box? - 9100-01

Carving/ Engraving: 117 High speed cutter, 7103 Diamond wheel point, 9910 Tungsten carbide cutter

Grinding/Sharpening: 953 Aluminum oxide grinding stone, 84922 3/16" Silicon carbide grinding stone

Cleaning/ Polishing: 403 Brush Wheel

Sanding: 407 ½” Sanding mandrel, 408 ½" 60 Grit sanding band, 430 1/4” Sanding mandrel, 431 1/4" 60 Grit sanding band, 432 ½” 120 Grit Sanding , 438 1/4” 120 Grit Sanding

Misc: 628 Drill bit set

Misc

Chuck wrench

Product description

The Dremel Multi-Vise helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws of the mini vise help protect delicate workpieces while providing a firm, steady grip. Rotary vise is adjustable to 360 degrees and tilts to 50 degrees.

The Dremel multi-vise helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws on the 2500-01 help protect delicate workpieces while providing a firm, steady grip, and they clamp to any worksurface up to 2-1/2 inches thick. This holder turns your Dremel rotary tool into a stationary sander, grinder or polisher, and the removable jaws create a stand-alone bar clamp on the Dremel 2500-01.

From the Manufacturer

The Dremel 2500-01 Multi-Vise helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws on the Dremel 2500-01 help protect delicate work pieces while providing a firm, steady grip.

• Multi-vise tool that helps you secure your project or free up a hand
• Rotates 360° and tilts 50° allowing the user to lock the workpiece in any position
• Clamps to any work surface up to 2-1/2" thick
• Tool holder turns Dremel rotary tools into a stationary sander, grinder or polisher
• Removable clamping jaws create a stand-alone bar clamp

User questions & answers

Question:	Does the range of motion allow for an attached Dremel to be positioned entirely vertically
Answer:	Mine is on 1/4 and it does fine
Question:	what is the power source of this product
Answer:	An air compressor with hose, and 18 gauge brads of a length suitable length for your project. Mine came with a bottle of oil (about 1 ounce) which should last a while since you only use a few drops before each use.
Question:	Am I correct that dremel rotary tool multi-vise can hold your dremel tool with dremel 225-01 flex shaft attachment attached? Older shaft won't
Answer:	Hi! According to the label on the gun the 18 gage brad range is as follows: 3/8", 5/8", 3/4", 1", 1-3/16", 1-1/4", 1-1/2", 1-5/8", 2".... I have used 3/4", 1", 1-14" & 2" ......Hope this helps
Question:	Does the accessory shown in one of the pictures for clamping the rotary tool come with the clamp? It is not shown in any of the vise pictures
Answer:	This fires 18 gauge nails in a length range of 5/8 inch to 2 inches long. I am far from an expert, but yes I think you could use this. A general rule I have heard is that in high traffic or stress points with shoe molding that 18 gauge is sometimes preferred but in other applications of shoe molding a small gauge is generally desired.

Product features

Multi-Vise Attachment: 2500-01

Flex Shaft: 225-01

A true must-have accessory for all hobbyists and do-it-yourselfers, the Dremel 225 Flex Shaft Attachment has a flexible, 36-inch shaft that attaches easily and adds an improved level of versatility to your project capabilities.

Work Station: 220-01

Ideal for crafts, hobbies, metal working, and a variety of around-the-house jobs, the 220-01 Dremel Work Station transforms any Dremel rotary tool into a tabletop drill press. It can be bolted on to your workbench, and it has the versatility to operate as a tool holder, flex shaft holder, and drill press.

Plunge Router: 335-01

Turn your Dremel rotary tool into a mini plunge router and cut perfect decorative edges, straight slots or rout freehand. Plunge feature lets you start your cut in the middle of your work piece.

Shaper/Router Table: 231

Gain the flexibility and precision you need to shape, detail, and sand a variety of soft and hard woods with the Dremel 231 Shaper/Router Table.

Detailer's Grip: A577

The handy Dremel Detailer’s Grip attachment is a quick and easy to use extra support for any rotary tool having a threaded nose piece. It transfers the weight of the tool to the palm of your hand for improved tool balance and control.

Sanding/Grinding Guide: A576

Stabilizes a handheld tool by providing an edge guide or serves as a work platform when the tool is mounted in a secure position.

Shield Kit: A550

Increased comfort from debris and sparks during cutting, grinding, sanding, and polishing applications.

Sharpening Kit: A679-02

Give your go-to tools a new lease on life. The A679-02 Sharpening Kit includes three of our most-popular attachments: the Dremel chain saw sharpener, lawn mower sharpener, and garden tool sharpener.

Multipurpose Cutting Kit: 565

Allows for sturdy controlled cuts in a variety of materials; including drywall, laminate, fiberglass, plastic and vinyl siding.

Tile Cutting Kit: 566

Turn your Dremel tool into a high-powered rotary tile cutter. Ideal uses include cutting around fixtures or plumbing during bathroom or kitchen tile installations and creating mosaics.

Not appropriate for cutting floor tiles.

Grout Removal: 568

Get the grout out and make re-grouting a breeze. With our grout removal attachment, you can turn your favorite Dremel rotary tool into a powerful, electric grout removal machine. Best of all, the attachment's unique shape keeps the bit at the perfect cutting angle and keeps it centered between the tiles.

Right Angle: 575

Enhances the versatility of your Dremel rotary tool by allowing you to get into hard-to-reach areas. Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 Right Angle Attachment.

Mini Saw: 670

A unique, innovative rotary tool accessory that allows you to cut through wood and wood-like materials as never before.

Circle Cutter and Straight Edge Guide: 678-01

The simple way to cut circular holes in many types of materials. Convenient measurement guides in both inches and centimeters, so you can out the right-sized circle every time.

Dust Blower: 490

Offers an innovative solution for improving visibility when using your Dremel rotary tool. By removing fine debris from your line-of-sight, our small air blower is great for detailed projects, sanding, engraving, and carving.

Multi-Vise: 2500-01

Helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws help protect delicate work pieces while providing a firm, steady grip.

Product description

The Dremel 4000 variable speed rotary tool offers the highest performance and most versatility of all Dremel rotary tools. The increased strength of its motor plus electronic feedback circuitry enables consistent performance at all speed levels. Dremel 4000 can use all existing Dremel rotary tool accessories and attachments plus high-performance attachments to complete the widest range of projects. A slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position.

• High performance motor – Provides maximum power and performance at all speeds. Variable speed (5, 000 – 35, 000 RPM) and electronic Feedback that auto adjusts power & speed for the most consistent performance even in the most demanding applications.
• Innovated air flow system - Ventilation mechanism helps prevent heat build-up for smoother, cooler, and quieter operation
• Kit includes 50 genuine Dremel accessories & 5 attachments including the Flex shaft, circle cutter & straight edge guide, shaping platform, multi-purpose cutting kit, shield, & lawn mower & garden tool sharpener
• Accessories & attachments compatibility: Accommodates all Dremel rotary accessories & attachments for thousands of applications.
• Replaceable brushes – Motor brushes can be replaced to extend tool life
• Slim & ergonomic body – 360-degree grip zone for added comfort & grip during extended use.
• Frustration free packaging

User questions & answers

Question:	La corriente va a 220v
Answer:	Don’t need a diamond blade , works awesome on grout, be careful don’t go too deep or you will cut into the underpayment moisture barrier, use the rectangular blade works real well, low speed
Question:	Is this unit infinitely variable between 5,000 rpm and 35,000 rpm. Meaning can i set it anywhere in between those speeds, and not just preselected spe
Answer:	Thank you for your question. The Dremel MM50-01 Oscillating Tool should not be getting hot. Make sure the vents are not being covered when holding the tool. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday - Friday, 8A - 5P CST.
Question:	Is the 4300 more powerful than the 4000? What is the difference besides light? Have 4000 and love it but need another
Answer:	There is a drywall blade that should work with plaster. However, it won’t be a dust free process. It is minimized though.
Question:	Is this tool gonna cry if i use it aggressively? Can it take it like a man
Answer:	Thank you for your question. The Dremel MM50 Oscillating Tool will only accept Dremel blades. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday - Friday, 8A-5P CST.

Product features

Delivers maximum performance

The tool comes with a power packed motor that delivers great performance at all speeds. Catering to different kinds of jobs that the tool can perform, it auto adjusts the power and speed and ensures ease of application even in the toughest corners.

In-built Ventilation

To ensure that the tool doesn’t get heated up with rigorous usage, there is an in-built air flow system that controls the temperature of the tool for a quieter and uninterrupted application.

Ease of Usage

The 360-degree grip zone on the product makes it easy to hold and use. The grip ensures that the tool doesn’t slip off from your hand while carving, polishing or routing. The tool is compact and ergonomic that makes it easy to carry and handle while doing the difficult jobs.

The speed of your tool in your control!

With various attachments compatible with the tool, you can various applications done if you have just the Dremel 4000-6/50-FF Rotary Tool Kit with you. Now, as it supports so many applications, it comes with a speed dial to give you the option of choosing the appropriate speed. It also has separate On/ Off switch for ease of usage.

Product description

The Dremel 100 Series rotary tool offers single-speed convenience for full-speed applications like routing, cutting, sharpening, drilling, sanding, engraving, buffing, smoothing, carving, and other applications. Its single-speed setting is perfect for all-the-time high-speed use with a variety of materials, including wood, metal, and plastic. It includes seven accessories and a collet wrench.

From the Manufacturer

The Dremel 100 Series rotary tool offers single-speed convenience for full-speed applications like routing, cutting, sharpening, drilling, sanding, engraving, buffing, smoothing, carving, and other applications. Its single-speed setting is perfect for all-the-time high-speed use with a variety of materials, including wood, metal, and plastic. It includes seven accessories and a collet wrench.

• The product is SGL Speed Moto Tool
• Single speed control for fulltime 35,000 rpm operation
• Cool-running ball bearing construction for smooth and quiet operation
• Replaceable motor brushes extend tool life
• Lightweight design for comfort during prolonged use

User questions & answers

Question:	has anyone put a variable speed switch in one of these? The ones available for the old style 395? Looks like it would fit
Answer:	Thank you for your question. The Dremel 3000 has an amp of 1.2. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday - Friday, 8A - 5P CST.
Question:	Can it rotate counterlockwise
Answer:	Thank you for your questions. This will take rotary bits 1/8" down to the 1/32". For further questions please contact Dremel @ 800-437-3635 8-5 M-F CST
Question:	Can you use the plunge router with the dremel
Answer:	Thank you for contacting Dremel, Yes, the grey storage case is included with the kit. Adrian Dremel Experience Support 800-437-3635
Question:	What amp is the 100 also is there a kit with the 3000 and a flex shaft only
Answer:	Thank you for your question. You have asked if the 3000 - 2/25 kit comes with a "handle attachment"... no, this does not. Should you have further questions, please contact our toll free number at 1-800-437-3635, Mon-Fri, 8 am - 5 pm, CST.

Product features

Cutting

The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut-off wheels are appropriate for the Dremel 100 Rotary Tool when your application involves slicing and cutting metal, light wood and plastic.

Grinding/Sharpening

Restore your furniture or appliances by removing rust and polishing metals by using a grinding or sharpening accessory. For non-ferrous materials such as stone, glass, ceramics and porcelain, use Silicon Carbide Grinding Stones to tackle your projects.

Sanding

Provide clean finishes or prep surfaces by using a sanding accessory. Choose from a variety of heavy-duty abrasive brushes and buffs to light-duty sanding bands and discs.

Single Speed Control

35,000 rpm performance to tackle everyday light duty applications.

Sealed Ball Bearing Motor

For cool running and longer tool life. Also promotes smooth and quiet operation.

Light and Compact

Lightweight and small footprint design for comfortable use in hand.

What's In The Box?

Cutting: 420 cut-off wheel.

Grinding/Sharpening: 84922 silicon carbide grinding Stone, 932 aluminum oxide grinding stone.

Sanding: 407 1/2 inch sanding drum, 432 1/2 inch 120-grit sanding band.

Miscellaneous: 402 mandrel, 415 dressing stone, wrench.

Product description

20 piece, cleaningolishing kit, includes accessories to polish a variety of materials & clean tough to reach areas, Plus more.

From the Manufacturer

Polish a variety of materials and clean hard to reach areas with the Dremel 684-01 20-Piece Clean & Polish Rotary Tool Accessory Kit With Case. Contains 20 bits and polishing compound so you can keep metals polished, clean and lustrous.

• Polish a variety of materials and clean hard to reach areas
• Perfect for cleaning jewelry
• Contains 20 buffing wheels and polishing compound
• Also includes a re-usable storage box
• Application and material usage information included
• 400 series XPR storage case compatible, removable organizer tray

User questions & answers

Question:	Did this kit come with a sanding drum? Trying to repair a little curb rash on a machined wheel
Answer:	Thank you for your question. The 100 model was made to strictly be a single speed tool. We cannot recommend that you use other models parts to change the tool. If you are specifically needing a vs tool, you could take a look at the 3000 model. If you have further questions, you can also reach us at 1-800-437-3635 m-f 8am - 5pm C.
Question:	Could I use these attachments with an ordinary household electric drill
Answer:	Thank you for your question. None of our Dremel tools rotate "counter clockwise", which means, "No", the model 100 cannot as well. If you need further assistance, please contact us at 1-800-437-3635, Mon-Fri, 8 am - 5 pm, CST.
Question:	Will it clean off the cloudy look on drinking glasses
Answer:	Yes
Question:	I have a Tag Heuer watch, and would like to use this to polish the band. The middle part of the band has mirror like finished look. Can this be done
Answer:	Thank you for your question. The Dremel model 100 is a 0.9amp tool. There is no kit with just the flex shaft and the model 3000. You can purchase the flex shaft separately to go on the 3000. For further questions please call Dremel at 800-437-3635 M-F CST.

Product features

General Purpose Kit: 687-01

This kit comes with a reusable storage box and includes 52 accessories:

Carving/Engraving: 194 High Speed Cutter

Grinding/Sharpening: 952 Aluminum Oxide Grinding Stone, 85422 Silicon Carbide Grinding Stone

Cutting: 409 15/16" Emery Cut-Off Wheel (x36), 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel

_

Cleaning/Polishing: 414 1/2" Felt Polishing Wheel (x2), 421Polishing Compound, 428 Carbon Steel Brush, 429 429 1" Felt Polishing Wheel (x2)

Sanding: 407 1/2" Drum Sander, 408 1/2" 60 Grit Sanding Band, 432 1/2" 120 Grit Sanding Band (x2)

Other: 401 Screw Mandrel, 402 Small Screw Mandrel

Cutting Kit: 688-01

This kit contains our most popular cutting bits and comes with a reusable storage box. Includes 69 accessories:

Cutting: 409 15/16" Emery Cut-Off Wheel (x36), 420 15/16" Heavy-Duty Cut-Off Wheel (x24), 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel (x3), 540 1-1/4" Cut-Off Wheel (x5)

Other: 402 Small Screw Mandrel

EZ Lock Cutting Kit: EZ688-01

This kit contains Dremel EZ Lock cutting wheels that last longer than the regular cut-off wheels. Includes 11 accessories for cutting metals, plastics and thin cuts:

Cutting: EZ409 1-1/2" Thin Cut Cut-off Wheel (x3), EZ456 1-1/2" Cut-off Wheel for Metal (x4), EZ476 1-1/2" Cut-off Wheel for Plastic (x3)

Other: EZ402 EZ Lock Mandrel

Sanding/Grinding Kit: 686-01

This kit is great for most every sanding, smoothing, shaping or grinding need. Includes a reusable storage box and 31 accessories:

Grinding: 932 Aluminum Oxide Grinding Stone, 8193 Aluminum Oxide Grinding Stone, 84922 Silicon Carbide Grinding Stone, 85422 Silicon Carbide Grinding Stone

Cutting: 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel

Sanding: 407 1/2" Drum Sander, 408 1/2" 60 Grit Sanding Band (x4), 432 1/2" 120 Grit Sanding Band (x4), 412 220 Grit Sanding Disc (x15), 511 Abrasive Buffs

Other: 402 Small Screw Mandrel

EZ Lock Sanding/Grinding Kit: EZ686-01

Speed-up your sanding and grinding jobs with technology from Dremel with EZ Drum and EZ Lock. Includes a reusable storage box and 18 accessories:

Grinding: 952 Aluminum Oxide Grinding Stone, 84922 Silicon Carbide Grinding Stone, EZ541GR EZ Lock Grinding Wheel

Cutting: 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel

Sanding: EZ407SA EZ Drum Mandrel, 408 1/2" 60 Grit Sanding Band (x3), 432 1/2" 120 Grit Sanding Band (x3), EZ411SA EZ Lock Sanding Discs 180 Grit (x2), EZ412SA EZ Lock Sanding Discs 220 Grit (x2), EZ413SA EZ Lock Sanding Discs 240 Grit (x2)

Other: EZ402 EZ Lock Mandrel

Carving/Engraving Kit: 689-01

This kit includes a reusable storage box and 11 accessories:

Carving/Engraving: 105 1/32" Engraving Cutter, 106 1/16" Engraving Cutter, 107 3/32" Engraving Cutter, 108 1/32" Engraving Cutter, 7103 5/64" Diamond Wheel Point, 7134 5/64" Diamond Carving Bit

Grinding/Sharpening: 83142 9/32" Grinding Stone, 83322 1/8" Grinding Stone, 83702 1/8" Grinding Stone, 84922 3/16" Grinding Stone

Other: 481 Collet

Cleaning/Polishing Kit: 684-01

This kit includes a reusable storage box along with 20 accessories:

Cleaning/Polishing: 403 Nylon Bristle Brush, 404 Nylon Bristle Brush, 405 Nylon Bristle Brush, 414 1/2" Felt Polishing Wheel (x6), 421 Polishing Compound, 422 Felt Polishing Tip, 425 Emery-Impregnated Polishing Wheel (x2), 428 3/4" Carbon Steel Brush, 429 1" Felt Polishing Wheel (x3), 520 Polishing Wheel

Other: 01 Screw Mandrel, 402 Small Screw Mandrel

EZ Lock Sanding/Polishing Kit: EZ684-01

This kit includes a reusable storage box along with 7 accessories:

Cleaning/Polishing: 423E EZ Lock Polishing Cloth, 421 Polishing Compound

Sanding: EZ471SA Detail Abrasive Brush 36 Grit, EZ472SA Detail Abrasive Brush 120 Grit, 511E Abrasive Buffs 180 & 280 Grit, 512E Abrasive Buffs 320 Grit

• Amazing Valentine's Day Gift for DIY Lovers
• ★ Quick Change Drill Chuck - Come with 3 Jaw Universal Chuck applying better stability on your projects, allows you to quickly and easily change accessories on Rotary machine tool freely. GOXAWEE Multi Chuck accepts accessories from 1/64” to 1/8” shank, wider compatible than others. Ideal when the application requires numerous accessory changes.
• ★ 140pcs Attachment & Accessory - Flexible Shaft holds like a pen for your precise projects. Cover Shield provide better protection for cutting and grinding. Drill Locator helps for precision work on wood. Diamond Cutting Wheel is the best tips for glass, ceramic, floor tile etc. Versatile accessories include a pair of extra carbon brush, rescue you from searching new set and saving money.
• ★ Variable Speed & Compact - Variable speed dial is easy to use. The Variable Speed Adjustment Knob showing 5 Step Speeds from 8,000 to 30,000 RPM. By adjusting the speed you can make delicate engravings on wood, glass, metals, plastics, tile and other materials with control easily. Its ergonomic compact rotary tool design makes it handhold size, lightweight, not make the loud noise.
• ★ High-Performance Craft Tool - Perfect for sanding, polishing, cutting, shaping, drilling, deburring, grinding, cleaning, engraving, trimming etc, and enabling you to achieve different crafting work efficiently. Whether you are repairing home tasks or lighting your creations, this is really a worth value investment.
• ★ Amazing Gift for DIY Enthusiasts - Packed in a solid carrying case. It’s more solid, falling resistant and moisture-proof. Machine and accessories are well organized in, easy to place, light weight, portable for carrying. GOXAWEE Rotary Toolkit G4007 is great for the DIY craft and small family projects. It’s also the gift for the people who are keen on handmade stuff.

Product features

For Wood Carving & Routing

With Multi-purpose cutting bit and drill locator, GOXAWEE rotary tool versatile enough to deal with your different wood crafts, allow you to fulfill the job fantastically.

For Glass & Metal Cutting

We thoughtfully put in Resin Cut Off Disc for metal products (cutting / sharpening). And the additional 545 diamond cutting disc is especially for glass, ceramic, floor tile. The 545 diamond cutting wheel has holes on the surface that could provide a better heat dissipation, and help users do the job quicker and more effective. Note: Kindly get the diamond disc wet when use it so as to longer its working life

For Stone Engraving & Grinding

Diamond drill bits are perfect for drilling holes through hard materials such as these: Glass, sea glass, beach glass, fused glass; Stone, gemstones, rock, pebbles; Ceramic, porcelain, tiles, glazed pottery, plates; Shell, antler, bone, fossil; Very hard wood etc.DO remember to use water for cooling to extend its lifetime.

For Surface Sanding & Polishing

To smooth your workpiece’s surface, you can choose from Abrasive Stone, Flet Wheel, Sanding Drum and Disc for your different objects.Polishing: Just put a few buffing compound on the flat wheel and gently glide the buffing wheel with a slow, steady, light touch will do things right.

Wider Compatibility

This 3 Jaw Keyless Drill Chuck allows you to quickly and easily change accessories on GOXAWEE Rotary tools without using collets & Accepts accessories from 1/64” to 1/8” shank.

Variable Speed Mini Drill Tool

Adjustable 5 Step (8000--30000RPM) variable speed rotary tool. It is suitable for a wide range of projects and tasks like sanding, engraving, grinding, cutting and so on.

Adjust the dial until you get the proper speed.

High Performance Craft Tool

This well made Durable Mini Rotary Tool Ideal for craft projects and DIY creations in your home, working in the garage, hobby, jeweler, jewelry tools and equipment, model making, woodworking, metalworking and more purpose

GOXAWEE -G4007-US Rotary Tool Kit

1* 3 Jaw Quick Chuck

1* Flexible Shaft

1* Cutting Guide

1* Transparent Shield

Specifications:

●Rated Input Power: 130W

●Voltage: 110-120V

●No Loading Speed: 8000-30000RPM

●Collet: 0.5~3.2mm (1/64 ~ 1/8 inch)

One for All Accessories Kit:

We thoughtfully added Diamond & Mini cutting wheels, extra Carbon Brush ... Allows you to tackle almost any DIY work that you want & All the accessories are compatible with most rotary tools, drill tools or die grinders.