13 best roofing staplers

Product description

Dewalt heavy-duty hammer tacker - Manufacturer: Dewalt.

User questions & answers

Question:	Why is the size of staple used by this hammer stapler not listed anywhere in the ad
Answer:	I use the ARROW Genuine T50 Staples 1/2 " staples. Box says #508 - I love and use my Hammer Tacker a lot.
Question:	Why does it say corded electric? is this a slap hammer or electric hammer stapler
Answer:	No idea-- someone entered incorrect info when they set up the listing-- this is a manual slap type stapler-- no electric no air no batteries-- just you.
Question:	Does this come staples
Answer:	It's does not come with staples, tool only.
Question:	Where is it manufactured
Answer:	Taiwan

Product description

Lightweight design afor comfort and control, Quick release cam-lock opens nose assembly to clear jammed staples, Built-In air fiter minimizes fust and debris from entering the tool.

• Compact with less weight for all day use
• Top-loading magazine allows user to quickly load 16 GA staples varying in length from 1"" to 2""
• Quick release cam-lock opens nose assembly to clear jammed staples, minimizing downtime
• Built-in air filter minimizes dust and debris from entering tool
• Hook allows tool to remain close by but never in the way. Minimum recommended air delivery of 2.3 SCFM @ 90PSI
• Rugged aluminum magazine has large holding capacity (up to 140 staples)
• Rubber bumpers protect the tool and surface from damage

User questions & answers

Question:	will this work to install vinyl siding
Answer:	I put it in the dryer and it looks like it didn't shrink. I used low heat to dry it
Question:	Will this gun shoot 3/4 inch staples
Answer:	Never thought of it. But yes.
Question:	Will this gun shoot 5/8" length staples
Answer:	No it doesn’t snag easily. The material is nice and thick. I have cats, not dogs, but it does well with them. They haven’t scratched my couch since I placed the covers on it. I have the gray, but the blue looks nice too.
Question:	what is the country of origin
Answer:	yes. my dog had it completely snagged up within hours of putting it on our couch. her collar actually got stuck in it too, which led to a panicked struggle. they dont look good either, and material is scratchy. i dont recommend at all. we ended up buying the helioplex stretch cover and like them sooooooo much

Product features

Makita AT32550A 1" Wide Crown Stapler, 16 Ga.

The Makita 1" Wide Crown Stapler (model AT2550A) combines ease-of-use and performance in a compact size. The AT2550A has a top-loading magazine that accepts 16 ga. 1" staples (accepts 1" to 2” staple length). Jammed nails are easily cleared by opening the quick-release cam-lock on the nose assembly. The AT2550A has a compact size and weighs only 5.1 lbs. for all-day use. Additional convenience features include a hook that allows the tool to remain close-by but never in the way, and a multi-directional exhaust port that directs exhaust air away from the user.

Product description

The Freeman PWC50 Pneumatic 16-Gauge 1" Wide Crown Stapler is specifically designed for heavy duty stapling applications such as lathing, stucco, roofing, sheathing, truss assembly, foam board insulation, house wrap, fencing, furniture framing, pallets, cabinet frames, and general construction. This air powered tool is compatible with SENCO, Hitachi, Duo-Fast, SpotNails SENCO-Hitachi style, and B&C Eagle 16 gauge glue collated 1" wide crown staples from 5/8" to 2" in length. A lightweight magnesium body combined with a one piece drive blade of hardened steel results in a durable and rugged staple gun great for long shifts at the job site or tackling home improvement and repair projects. Built for contact actuation bump firing, a fire lock for safety prevents accidental firing when not in use. A quick jam release allows for easy access clearing in the event of a jammed fastener, avoiding delays and increasing productivity. The driving depth of the staples is easily adjustable for various applications by simply turning a wheel near the trigger. Other features include an easy to load top-loading magazine with a simple pull back pusher, a comfort grip handle to reduce vibrations and impact while increasing control, and an air filter / anti-dust cap to keep interior components free of debris and extend the life of the tool. The Pneumatic 16-Gauge 1" Wide Crown Stapler is ideal for DIYers as well as professional construction contractors, includes air tool oil and adjustment tools, and is covered by Freeman’s 7 Year Limited Warranty and 90 Day Wearable Parts Warranty.

• Ideal for heavy duty applications such as lathing, stucco, roofing, sheathing, truss assembly, foam board insulation, house wrap, fencing, furniture framing, pallets, cabinet frames, and general construction
• Compatible with SENCO, Hitachi, Duo-Fast, SpotNails SENCO-Hitachi style, and B&C Eagle 16 gauge glue collated 1" wide crown staples from 5/8" to 2" in length
• Magnesium body results in a lightweight tool great for long shifts
• One piece drive blade for increased durability extends the life of the tool
• Contact actuation bump firing for speed
• Fire lock for safety prevents accidental firing when the tool is not in use
• Quick jam release allows for easy access to the drive blade in the case of a jammed fastener

User questions & answers

Question:	I bought this item and can not find staples that fit. They need to be 3/4" or less in length. Could you post a link of the staples that fit
Answer:	Yes
Question:	Work with staple 26.mm
Answer:	The one I purchased was made in Taiwan, and to date, has worked flawlessly. I purchased it to install condensed foam insulation and some fiberglass as well. It works superbly for both, mainly due to the excellent depth control. I have driven about 8 to 9 thousand staples without a flaw. Keep the air cylinder lubed.

Product description

Shingle-gauge, for conveniently spacing shingles. Exclusive jam-free magazine. Molded rubber comfort grip. Adjustable depth control. Specs: Tool Weight: 5.1lbs; Height: 8 5/8"; Length: 14 1/2"; Width: 3"; Air Flow per Shot: 0.022 CFM; Maximum Pressure :100 PSI; Collation Type: Adhesive; Exhaust: Rear; Tip: Carbide; Plug: 1/4" Male; Trigger: Contact; Magazine Capacity:160. Fastener Specifications: 16 GA, 1/2-1 1/2", Staples, Crown Size 1".

From the Manufacturer

This Industrial Wide Crown Roofing Stapler has a lightweight, durable aluminum frame and a patented jam-free magazine. Power control valve adjusts power by 30 percent. Molded rubber comfort grip lasts life of tool. Reduced height for stapling in tight areas. Adjustable depth control prevents over-penetration of staple. Rear exhaust conveniently directs exhaust away from user and work surface. High capacity, top load magazine decreases reload time. 438S2R-1 Contact Trip. 438S2R-2 Sequential Trip.

• 3/4- to 1-1/4-Inch 16-gauge nailer for composite shingle roofing, sheathing, and house wrap/vapor barrier
• Patented jam-free magazine; power control valve adjusts power by 30 percent
• Lightweight, durable aluminum frame; molded rubber comfort grip lasts life of tool
• Magazine capacity 160 staples
• 7-year warranty

User questions & answers

Question:	Where do you buy 1 1/4 inch wide crown staples
Answer:	not sure. It takes 1 inch staples and 1inch is 25.4 mm so they may work or they may be to tight. my boxes of staples say they are 25mm
Question:	Will this gun use 3/4 wide by 3/4 long staples
Answer:	No you will want a 7/16 crown stapler for vinyl
Question:	does it come with a case
Answer:	No.

Product description

DEWALT Carbon Fiber Hammer

• Carbon Fiber Hammer
• DWHT75900
• Package Weight: 0.7 kilograms
• Included components: DEWALT Carbon Fiber Hammer

User questions & answers

Question:	Will A-11 staples for carpet pad work in this
Answer:	The 1 1/4" refers to the max leg length, nail gun depot, staple mania, Home Depot ........
Question:	will this use a common staple like one for a T-50 or the Bostitch guns or is it Dewalt staples only
Answer:	Yes
Question:	Will it work with 1/4" staples
Answer:	There weren't any cases with these, they were retailed in a cardboard box.Thank you Herman!
Question:	will this work with 1\2 in crown by 1\4in leg staples
Answer:	I bought the staples from Grainger, they were Senco brand.

Product description

Arrow's HT50 Heavy Duty Hammer Tacker, strikes like a hammer, automatically driving a staple with each blow. This Hammer Tacker features Durable Chrome finish, All steel construction, Long lasting hardened steel working parts, Specially designed power grip handle, Jam-proof mechanism and a retractable striking edge. It loads two full strips T50 staples in 3 sizes: 5/16", 3/8" and 1/2". Uses: Roofing, Crates, Carpeting, Insulation

From the Manufacturer

Arrow's HT50 Heavy Duty Hammer Tacker, strikes like a hammer, automatically driving a staple with each blow. This Hammer Tacker features Durable Chrome finish, All steel construction, Long lasting hardened steel working parts, Specially designed power grip handle, Jam-proof mechanism and a retractable striking edge. It loads two full strips T50 staples in 3 sizes: 5/16", 3/8" and 1/2". Uses: Roofing, Crates, Carpeting, Insulation

• Durable Chrome Finish
• All-Steel Construction
• Long Lasting Hardened Steel Working Parts
• Specially designed power grip handle
• Jam-proof mechanism

User questions & answers

Question:	Can this be used on engineered hardwood flooring underlayment? I've seen people using a stapler powered by an air compressor. Looking for cheaper opt
Answer:	A-11 and T50 staples are interchangeable so it should work. I use a Senco, Arrow, and rapid11 hammer tracker for roof felt and these will accept both types of staples with out issue.
Question:	Can this be used for house wrap, tyvek, OR will it cut thru the tyvek with the hammer action
Answer:	Yes this take the regular T-50 staples.
Question:	how to reload staples
Answer:	No. It drives 5/16", 3/8", & 1/2" T-50 Staples.
Question:	What size staples does it use
Answer:	No

Product description

The Stanley Bostitch 651S5 is a sheathing stapler designed with easy to use features for the contractor.  Key features include a flip open nose design for easy jam clearing, adjustable depth of drive, vinyl siding adapter for proper siding installation, adjustable rafter hook, a contoured grip for comfort, and a selectable trigger for tool free switching between contact and sequential operation.  It is lightweight at only 4.2-Pound and powerful with a rapid fire engine that drives 10+ nails per second.  with the 2-Inch capacity it is perfect for applications such as plywood sheathing, roof decking, wood shingles, and vinyl siding. .

• Rapid fire engine produces 10 or more staples per second
• Lightweight at just 4.2 Pound
• Tool free jam clearance reduces downtime

User questions & answers

Question:	where can i get 2" stainless staples for 561s
Answer:	No this stapler isn't designed for that. The staples are to wide. I'm sure the air stapler you saw being used was a 1/4 inch crown stapler!
Question:	will this shoot 3/4in long staples
Answer:	I can’t say specifically for tyvek, but the hammer action isn’t too rough. I’ve used it on Kraft backed insulation to wall studs without many issues. I think the material under the wrap is what makes the most difference. I have used this on roofing felt, carpet padding, and insulation. I have owned it for about 8 years now and still works great.
Question:	Will it load and shoot Senco Q series staples (7/16" 15 gauge
Answer:	It is extremely easy to reload, simply pull out the sliding shaft, place the row of new staples in the slot and slide the unit back together. This was a particularly user friendly feature when walking through the woods posting No Trespassing/No Hunting signs.
Question:	Can I staple hardware cloth (welded wire fencing) with this tool
Answer:	Stamped into the metal chassis are the staple sizes actually accepted by this product, and it only accepts up to 1/2 inch staples. This hammer stapler by Arrow DOES NOT handle 9/16 staples... I tried and they won't fit.

Product description

The STINGER HT38 Hammer Tacker is an affordable way to staple roofing felt and rolled insulation. The tool holds 168 crown staples and features a quick-load magazine to reduce downtime on the job.



The lightweight tool weighs 2.1lbs (0.95kg) and is easy to maneuver, but offers the durability of heavy-duty steel. The anti-slip ergonomic rubber handle provides comfort and adds to the ease of use. We recommend using the HT38 with STINGER 3/8”x3/8” (9.5mmx9.5mm) A-11 crown staples 21ga, but it can accommodate 1/4” (6.35mm) to 3/8” (9.5mm).

• Install roofing felt and rolled insulation easily and affordably with the HT38 Hammer Tacker
• The tool holds 168 crown staples for longevity on the job site
• Durable tool is made of heavy-duty steel and features an anti-slip, ergonomic rubber handle
• The HT38 only weighs 2.1 pounds and is easy to maneuver and load
• Recommended for use with 3/8 inch x 3/8 inch 21 gauge, A-11 type staples

User questions & answers

Question:	does it takeT50 Staples
Answer:	Definitely. There's a tip for stapling vinyl siding that would work perfectly for wire.

Product description

Duo-Fast HT550 Classic Hammer Stapler

From the Manufacturer

It's the hammer tacker preferred by construction professionals, used in applications such as carpet padding, insulation, roof paper, and vapor wrap. The hammer tacker uses 5000 series fasteners, with a load capacity of 168 staples.

• Rear loading magazine
• Quick clear jam clearing
• Heavy-duty, durable construction
• Two-strip capacity
• Dimensions: 3-3/4 " H, 11-1/4" L

User questions & answers

Question:	Does the duo-fast also accept arrow staples
Answer:	Yes it does
Question:	How do I Clear a Jam
Answer:	Try your lumber yard. I know Home Depot doesn’t sell them but Lenco lumber or 84 lumber does. And they’re way cheaper than 16’s
Question:	Im looking for the pushing that goes inside the hummer stapler but i cant find it here. I need some help with that. Can you please help me with that
Answer:	No. Will shoot 1 inch to 2 inch, according to specs. Have never tried 3/4 inch, however.
Question:	how do you load the staples
Answer:	No! Only bostitch BCS1200 series, Spotnails 7600.

Product description

The N3808AP 1-1/2" Cap Stapler brings power, precision, and convenience to the home-wrap and roof-felt industry. With a weight of only 4. 8 lbs, and accepting 200 staples and caps in the magazines, this tool provides maximum jobsite efficiency. It drives 18-Gauge 7/16" crown staples through 1" diameter caps to provide maximum hold and support. Exceptional balance, tool-less depth of drive and 360° adjustable exhaust make this cap stapler ideal for housewrap, insulation, tar paper, synthetic roofing underlayment and other similar applications. The N3808AP cap stapler comes standard with a sequential trigger installed on the tool and an optional contact (bump) trigger in the box.

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• APPLICATIONS: Ideal for roofing felt, foam insulation, and house wrap
• LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use
• FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
• CAPACITY: Basket holds 200 caps and magazine holds 200 staples
• PERFORMANCE: Provide superior hold and shear values than common 3/8 In. systems
• TRIGGER: Two triggers, red for sequential firing and black for bump firing

User questions & answers

Question:	what is the part number for 1.5 inch staples and caps? I only see for
Answer:	The HT-550 accepts Arrow 850 Series Staples, which can be found on Amazon and Arrow's Website. This Hammer Tacker does not accept Arrow's T50 Staple, the most well known heavy duty staple.
Question:	Will 16gauge x 7/16 x 7/8 leg
Answer:	To clear a jam you need to unlatch the spring system that attaches to the slide then release the jaw and dig out the staples. Jams happen but these staplers are notorious for lemons. I've had some that last years without jamming and others that do it right out of the box constantly and make them unusable for anything besides a parts stapler for my other ones.
Question:	Is there no way to buy just ,18gage 7/16crown staples
Answer:	Im not sure what exactly u are asking, a bushing instead of pushing or the metal part that pushes the staples forward to feed the stapler?
Question:	Will the gun shoot staples without caps
Answer:	Sorry I just noticed that. The staples go in the handle. They slide in the back and are held in by a spring you pull behind them.

Product description

R19 Fine Wire Hammer Tacker All Steel light duty hammer tacker for fast attachment of labels, posters, and other thin materials. Fits fine wire staples up to 1/4-Inch.

• All Steel Construction
• Ergonomic Handle
• Non Slip Grip
• Loading Mechanism with no loose parts
• No. 19 Fine Wire Staples

User questions & answers

Question:	Can i use T50 Staples on this
Answer:	Hitachi 311053
Question:	Will this work with standard staples
Answer:	I have only used 18 gauge in mine, i have never tried 16 sorry
Question:	Can this be used for stapling wire mesh to a plastic container
Answer:	I have never seen 18Ga 7/16" crown staples. I believe they only come in 16Ga.
Question:	Would this stapler's staples (1/4 in) be strong enough to get radiant barrier attached to attic roof rafters
Answer:	Yes, when the cap feed runs out it just fires staples.

Product features

Fine Wire Hammer Tacker by Rapid

The R19 Hammer Tacker by Rapid features heavy duty full steel construction. Ideal for professional and trade users, for fastening labels, posters, textiles, plastic wrap or insulation material. For regular use, this tool is lightweight and easy to handle.

Proudly made in Sweden

Rapid has a long and proud history. Ever since we were established in 1936, we’ve based our company concept on Swedish engineering.

The design and development process is built on the solid foundation of our Swedish heritage, with effective and easy solutions as well as a product range filled with a wide variety of products for effective fastening.

Use with Genuine Rapid Staples

Use number 19 Rapid Staples. Items 23391100 - 6mm fine wire, standard strip and 23391500 - 8mm, fine wire, standard strip. Both available right here on Amazon.

• One Unit, Four Tools - This unit features a 75-Watt De-soldering Station, a powerful 650-Watt Hot Air Rework Station, a 60-Watt Soldering Station and a Suction Pen for more choices.
• Intelligent Heat Control - PID program implanted to give temperature control at super high speed to deliver accuracy.
• Customizable Functions & Many Extra Accessories - °C / °F Display, Sleep Function, Hot Air Gun Auto / Manual Mode, Cool / Hot Air Switchable, Digital Temperature Calibration. Even more, this unit comes with many useful accessories to get you started.
• Supreme Guide to its Detection Mechanism - With CPU within, it can detect changes of the parts and send the information to you. Besides the safety assurance, error message like “S-E” or “F-1/F-2” and available replacement parts allow for timely resolution.
• Exclusive Warranty – Got a problem? Get in touch with us on Amazon, and we'll help solve it. Our warranty gives you access to one-stop support and on-demand Q&A with our technical experts for an entire year. (starting from the day of purchase). Kind reminder here: this model works on 110-127V with its USA plug. And spare parts are available right in our store.

User questions & answers

Question:	Which soldering tips will work with the soldering iron in this station
Answer:	Dear customer, Thank you very much for your question here. The #1200 Soldering Iron Tips will work with the YIHUA 948-II. You can please search with the ASIN below or simply click the link to its product page for details. 1.Soldering Iron Tips Set—YIHUA #1200 Soldering Iron Tips Set 10PCS Long-Life Type Fit for YIHUA and WEP SGS Certified Lead-Free Tips ASIN: B07RNQWS62 Link: https://www.amazon.com/dp/B07RNQWS62 For your reference, below are some other replacement parts compatible with YIHUA 948-II. For more information, pls also search with their ASINs or click the links to their product pages. 2. Ceramic Filter and Carbon Filter —YIHUA #948CF 10pcs Desoldering Replacement Ceramic Filter and 10pcs Carbon Filter (For Yihua 948/Yihua 948-II Desoldering Gun ONLY, Total Pack of 20) ASIN: B07Z7DVHKP LINK: https://www.amazon.com/dp/B07Z7DVHKP 3. Desoldering Nozzles Set —YIHUA #948N Desoldering Nozzles Set 4PCS Long-Life Type/ 0.8mm,1.0mm,1.2mm and 2.0mm (For Yihua 948/Yihua 948-II Desoldering Gun ONLY) ASIN: B07Z7DW8N8 Link: https://www.amazon.com/dp/B07Z7DW8N8 4. Desoldering Suction Gun Handpiece—YIHUA #948G Replacement Desoldering Suction Gun Handpiece/Handle for Yihua 948 and Yihua 948-II Soldering Station ASIN: B07Z76P231 Link: https://www.amazon.com/dp/B07Z76P231 5. Soldering Iron Handpiece—YIHUA #948A Replacement Soldering Iron Handpiece/Handle for Yihua 948 and Yihua 948-II Soldering Station ASIN: B07Z7HGGXH Link: https://www.amazon.com/dp/B07Z7HGGXH 6. Cleaning Pin —YIHUA #948P Stainless Cleaning Pin Set for Desoldering Gun (For Yihua 948/Yihua 948-II Desoldering Station ONLY) ASIN: B07Z79822M Link: https://www.amazon.com/dp/B07Z79822M Should you have any questions, please feel free to contact us via Amazon's Buy-Seller Messaging System (link is here: https://amzn.to/2mKq0EU ).We are always happy to help. Best regards, YIHUA OFFICIAL STORE
Question:	What is the paddle shaped item for
Answer:	Dear customer, Thanks a lot for your question here. The paddle shaped item is a silicone pad that is typically designed for replacing the de-soldering nozzles for the de-soldering gun! It can resist heat up to 500 °C / 932 °F and protect user against burning! Should you have any further questions or require assistance, please drop us an email at Amazon Messaging System(link is here: https://amzn.to/2mKq0EU). We will respond within 24 hrs! Best regards, YIHUA OFFICIAL STORE
Question:	Does this machine have a variable air speed
Answer:	Dear customer, Thank you for your question here. Yes, the YIHUA 948-II 4-in-1 station comes with simulated air volume and variable air volume adjustment. You can rest assured to make the purchase. Feel free to drop us a message at Amazon's Messaging System if you require any further assistance (link is here: https://amzn.to/2mKq0EU). We will promptly attend to you. Best regards, YIHUA OFFICIAL STORE
Question:	es 110/220 ? de corriente
Answer:	Dear customer, We confirm that this YIHUA 948-III will operate on 110V. Should you have any questions, please feel free to contact us via Amazon's Buy-Seller Messaging System（link is here: https://amzn.to/2mKq0EU） Thank you and best regards, YIHUA OFFICIAL STORE

Product features

When you get the 948-II 4-IN-1 professional rework station, you can look forward to:

A multi-station integrated with Desoldering Station, Soldering Station, Hot Air Rework Station, and Suction Pen. This station is built for you to complete rework, desoldering, and soldering applications on components and ICs packaged in the BGA, SOIC, QFP, PLCC format (through-hole & surface-mount).

Desoldering Station

• Tem. Range: 662-896°F
• Temp. Stabilization: PID Program
• Solder Extraction: Vacuum Pump
• Nozzle Sizes: Ø0.8/1.0/1.2/2.0mm
• Suction Pressure: 0.05Mpa
• Preset Channel: 3 Available Channels

Soldering Station

• Temp. Range: 392-896°F
• Temp. Stabilization: PID Program
• In-Holder Sleep Mode: Yes
• Adjustable Sleep Mode Timer: Yes
• Preset Channel: 3 Available Channels

Hot Air Rework Station

• Temp. Range: 212-896°F
• Temp. Stabilization: PID Program
• Temp. Stability: ±1.8°F
• Air Volume: 120L Max.
• Automatic/Manual Hot Air Modes: Yes
• Preset Channel: 3 Available Channels

Suction Pen (Extraction)

• Suction Pressure: 0.05Mpa
• Independent ON/OFF: Yes
• Suction Pad Size: Ø3.0/6.5/10mm
• Compatible IC Types: BGA, PLCC, SOIC, QFP, and more

Effortless Desoldering

The desoldering gun enables one-handed desoldering operation on a broad range of through-hole components. The desoldering station is especially suitable for desoldering in-line sockets, transformers, LCD screens, nixie tube displays, IC chips, and in-line headers. The station pre-heats for 5 minutes to ensure the entire desoldering mechanism is heated sufficiently to give you a smooth desoldering experience.

Sleep Mode & Automatic Shutdown

The soldering station and desoldering station comes with a timer controlled sleep mode function. You can customize the timer duration, and once the timer countdown is finished (and the iron/gun wasn’t moved), the station puts the desoldering gun / soldering iron to idle at 392°F to prevent unnecessary oxidation while keeping sufficient heat in the tool to heat up quickly. You can also set the desired timer value for the automatic shutdown function, which begins counting down once the desoldering / soldering station is in sleep mode, and turns OFF the station when the countdown is finished.

AUTO/MANUAL Hot Air Modes

You can choose either the automatic or manual hot air modes based on your usage frequency, choosing the right mode for your work can extend the lifespan of the heating element. In automatic, the hot air gun cools to below 212°F and cuts power when placed in the holder. In manual, the hot air gun continues to operate as per normal when placed in the holder.

Suction Pen

The suction pen is a useful tool for picking up ICs when the IC are too large for standard tweezers to extract, you can use the hot air station in conjunction with the suction pen to extract large sized components with ease.

Classification

• Capable of Soldering & Desoldering& Rework operations
• For Surface-Mount and Through-Holecomponents
• On components such as SOP, DIP, SOIC, PLCC, BGA, QFP, CHIP, and more

Functions

• PID Temperature Stabilization
• Digital Temperature Calibration
• °C/°F Conversion
• Hot Air Fail-Safe
• And more

Features

• Digital LED Nixie Display
• Real-Time Setting Information Display
• 6 Preset Channels (3 Hot Air / 3 Soldering)
• And more

Product description

Please note this tool needs an air compressor to operate. An air compressor does not come with the tool/kit. This user friendly and lightweight air powered stapler is a must for the DIY homeowner. You will be able to finish your projects or repairs in half the time and have fun doing it. In this kit you will receive 1250 staples of each different length: 1/4", 5/16", 3/8", 1/2" And 9/16". These are Surebonder #4 standard size heavy duty staples, same as Arrow T50 type staples. The kit also includes a high impact carrying case, An allen wrench, small bottle of tool oil and easy to follow operating instructions. The applications are endless-here are a few; upholstery, insulation, screen repair, woodworking projects, fencing repairs. Standard features include: safety mechanism that prevents accidental firing, an adjustable Air exhaust, a rubber cushioned handle for comfort, A Quick release magazine for easy staple loading, staple viewer and 1/4" Quick release connector. (Air compressor needed but not included). Use an air hose that will withstand at least 150 psi, OR 150% of the maximum pressure of the compressor. Never connect this tool to compressed air if the pressure could exceed 200 psi, as the stapler could burst.

• Uses Surebonder #4 staples 55014, 55516, 55038, 55012, 88516, 88038 & 88012
• Air compressor is needed to operate tool - Does Not Come With Tool
• Kit: carrying case, 6250 staples in 5 different lengths, Allen wrench, bottle of tool oil, Staple gun & Operating instructions
• Applications: cabinet backs, carpet padding, screen door repair, small furniture projects
• Our customer service department is available for troubleshooting

User questions & answers

Question:	Can you bump staple with it
Answer:	Not sure about paselode nails. The Surebonder 16-Gauge Straight Finish Nail Gun is an indispensable tool when working on casing, cabinets, trim, furniture repair, baseboards, chair rails and more. The Model 9755 features a safety mechanism that prevents accidental firing, quick-release nosepiece for fast jam clearing and adjustable air exhaust and adjustable depth drive, plus a high-impact carry case.SPECIFICATIONSDIMENSIONSMaximum fastener size (in.) 2.5 Product Depth (in.) 2.95 Minimum Fastener Size 1-1/4 in Product Height (in.) 10.63 Minimum fastener size (in.) 1.25 Product Width (in.) 12.6 DETAILSAir Tool Type Air Nailer Maximum Fastener Size 2-1/2 in Compressor/Air Tool Features Adjustable Exhaust Port,Fastener Depth Control Nail Gauge 16 Cordless/Corded Cordless Nailgun Angle 0 Energy Type Air Reconditioned No Fasteners included No Returnable 90-Day Included No additional components or accessories are included Tools Product Type Air Tool Loading type Strip Drives 1-1/4 in. through 2.5 in. 16-Gauge straight finish nailsSafety mechanism prevents accidental firingAdjustable air exhaust and depth controlQuick loading magazine and carrying case included
Question:	Will it shoot staples thru plastic on atv seat
Answer:	You can have them engrave anything you want. We had ours made as a mother's ring with the two boys names on either side and 'my boys' on the inside.
Question:	hi is this a 20 guage staple gun
Answer:	Get started by choosing ring size, then clicking "See All Buying Options" and then "Customize Now"
Question:	Is this to strong to staple window screen to plastic lattice
Answer:	No. You would have to likely run the ring over with a car and break the double layers of rhodium before exposing the pure silver on the inside. The rhodium seals it all in to protect the silver so that it does not turn colors, while also providing the long lasting high shine. In additional we include a free polishing cloth which will buff out any surface scratches you get if wearing it 24/7 on active hands.

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The Surebonder 9600AK Pneumatic Heavy Duty Standard T-50 Type Stapler Kit gives you carrying case, 6250 staples in 5 different lengths, Allen wrench, bottle of tool oil and a staple gun. This lightweight power tool can be used to finish your projects or repairs in half the time.

Easy to Use

This tool by Surebonder can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. This tool is also extremely safe to be used as it comes with a few safety mechanisms that prevent accidental firing, including an adjustable air exhaust, a rubber cushioned handle for comfort, a quick release magazine for easy staple loading, staple viewer and much more.