10 best dewalt framing nailers

Product description

DEWALT 30 Degree Paper Tape Collated Framing Nailer. Pneumatic nailer. Industrial grade design for high speed and high volume framing applications. Lightweight with enhanced ergonomics and balance for comfrot and control. Recoil dampening engine system to minimize recoil. Tool-free features: depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode.

• Pneumatic nailer
• Industrial grade design for high speed and high volume framing applications
• Lightweight with enhanced ergonomics and balance for comfrot and control
• Recoil dampening engine system to minimize recoil
• Tool-free features: depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode

User questions & answers

Question:	Will the dewalt dwf83pt accept 33 degree clipped head nails
Answer:	a little heavier than pneumatic nailers but no hose dragging or limiting your movement making it easier and more convenient to use
Question:	I am a little confused description says 20v but this is a pneumatic nailer and runs on air amazon please change description
Answer:	Yes
Question:	But why it said “20V Max
Answer:	You can use a wide range of plastic collated nails from 2-3 1/4 inch
Question:	Will it still shoot when it's out of nails
Answer:	You can use a FlexVolt 20v/60v Lithium Ion Battery branded by DeWalt with this tool.

• Industrial grade design for high speed and high volume framing applications
• Recoil dampening engine system to minimize recoil. Adjustable rafter hook
• Lightweight at only 8 lbs. With enhanced ergonomics and balance for comfort and control
• Tool free Features: depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode
• adjustable rafter hook

User questions & answers

Question:	What gauge are the nails
Answer:	about 1.5 inches - give or take a smidge.
Question:	Is there a case
Answer:	i received 2. Its says 2 pack right in the main description. Be careful though, they are not a full 3 feet long like it says. it's about 2 inches short of 3 feet.
Question:	will the rafter clip swing around enough to clip onto my toolbelt on the righthand side
Answer:	I'm sorry, but I haven't had it for that long. And we do t have much company, and only one of us goes in and out.
Question:	Is this pneumatic with air or is it electric? Features and details listed as electric
Answer:	Ad says 2 pack. I only received 1

• Industrial grade design for high speed and high volume framing applications
• Lightweight with enhanced ergonomics and balance for comfort and control
• Recoil dampening engine system to minimize recoil
• Tool free features: depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode
• Adjustable rafter hook

User questions & answers

Question:	I bought this gun for framing my basement. What brand nails do you recommend? Is there any brand you don’t recommend because of jamming
Answer:	Slide it under the door.
Question:	Does this gun have a belt hook
Answer:	Yes and no. Light sound it will. If you're thinking loud sounds and noise, no it does not.
Question:	a lot of different model guns which gun is best for framing
Answer:	Yes. I used one draft guard on a door between an upstairs bedroom and the attic to keep out insects and rodents. I used another draft guard on the door between our main floor hallway and the basement stairs to do the same. Both have worked very well so far.
Question:	is this really corded-electric or pneumatic
Answer:	Yes. It comes with two foam inserts that you have to put together. No hard at all.

Product description

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Dual-speed motor optimized to drive a wide range of fasteners for a variety of applications
• Tool-free selector switch for sequential or bump Fire modes
• Tool-free depth adjustment for precise nail placement
• Stall release lever to reset driver blade in the event of a jam
• Adjustable rafter hook

User questions & answers

Question:	is it possible to use this nailer on dry wall
Answer:	Yes you can. Just use a smaller nail and adjust the depth.
Question:	Biene con cargador
Answer:	Si pero esta herramienta es muy mala mo la recomiendo
Question:	Do I need the two speed? Those who have the two speed, do you use the second one that is not on the 690? Thanks
Answer:	Yes. The 2 speed is worth the extra money
Question:	will this do framing, finishing and brad nails
Answer:	Only framing nails

Product description

The 20V MAX* 21 Plastic Collated Cordless Framing Nailer delivers the performance demanded by pro's to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4" and 0.148" in diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.

• Dual-speed motor optimized to drive a wide range of fasteners for versatility
• Tool-free selector switch for sequential or bump-fire modes
• Tool-free depth adjustment for precise nail placement
• High-strength aluminum magazine with easy-to-operate pusher latch
• Stall release lever to reset driver blade in the event of a jam

User questions & answers

Question:	Does this come nailer come withe batteries and charger
Answer:	Hi hope this answer your question(s) lol ... Tool kit includes: XP Cordless Framing Nailer, rechargeable lithium-ion battery, lithium-ion battery charger, rugged carrying case, owner's manual, safety glasses, and 5/32 in. hex wrench
Question:	What nails can i put in this .. thank you
Answer:	Orange Fuel Cell. I purchased the fuel with the nail pack for the CF325 Model. Fuel and nail packs are matched, and would be ordered by Nail Size (Gauge and Length, and Angle/degree). Example: This worked for my nailer ( https://www.amazon.com/dp/B002NU6HBQ/ref=cm_sw_r_em_apa_LsKHxb16PDPP4 )
Question:	can you use the 20/60 volts-9ahdwalt battery or which is the best batery for this nailer
Answer:	I do not know. I purchase the nails and gas cylinder as a kit.
Question:	Que medidas de clavos usa y cual tipo debo usar
Answer:	http://www.paslode.com/product/cordless-xp-framing-nailer/ Go to the above web-site and look at the Spec's. I'm building a new home and purchased this gun. I have had other Battery powered nail guns, and returned them because they were not reliable. Nails (30 degree) are expensive, but you get what you pay for. If your going to be in a remote location I suggest you buy extra gas cylinders and paslode oil. I also have the Paslode Finish Nailer as well. Both products are very reliable and well worth the investment. I give it 5 Stars..... Good luck with your project

• At 10.5" (26.7 cm) tall, fits conveniently inside 12" (30.5 cm) on-center framing and other tight areas
• Fastener placement made easy with exposed nail tip
• Tool-free adjustable rafter hook for convenience

User questions & answers

Question:	Have case for this
Answer:	We offer 3 sizes. Product dimensions are: 44"w x 32"h (large), 41"w x 29"h (medium), 38"h x 26"w (small)
Question:	The spe s say its a corded electric power source. Is that correct
Answer:	Not that I’m aware. Try contacting manufacturer if replacement parts are available.
Question:	Does it come with a hard plastic carry case
Answer:	If you offer stainless steel, chrome, etc...feet and handles that would be perfect! Please make them in that color.
Question:	Could this shoot through metal gussets if needed
Answer:	The materials are non-toxic and non-carcinogenic.

Product description

INCLUDES: DCN692B FEATURES: Brushless Motor and engine design allow the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. 2 Speed Selector Switch Optimizes Speed for Fastener Lenghts Easy access to the nosepiece for the removal of jammed nails Trigger Lock-Off allows trigger to be disabled when tool is not in use Top cap is impact resistant and easy to remove for troubleshooting SPECIFICATIONS: Nail Diameter: .113 - .131gauge Voltage: 20 Nail Length Capacity: 2" - 3-1/2" Magazine Angle: 33° Nailer Operating Mode: Bump/Sequential Front Handle Style: Contoured/Overmold Magazine Capacity: 55 Magazine Loading: Lock Load Jam Clearing: Yes Integrated Belt Hook: Yes Tool Height: 13.0" Tool Width: 4.7" Tool Length: 13.3" Tool Weight: 7.7lbs

• Brushless Motor and engine design allow the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• 2 Speed Selector Switch Optimizes Speed for Fastener Lenghts
• Easy access to the nosepiece for the removal of jammed nails
• Trigger Lock-Off allows trigger to be disabled when tool is not in use

Product description

The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Magazine Loading - Bottom Load

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand

The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio

The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Framing nailer and two quick-change nosepieces.

From the Manufacturer

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications

User questions & answers

Question:	Is it true that the hammer is only "positive placement" for nails up to 2.5" long
Answer:	Yes, pp tip for nails up to 2.5" in length. Framing tip for up to 3.5"
Question:	How is it powered? Is it pneumatic or battery operated and/or use compressed gas cylinders
Answer:	It is pneumatic. I've been using a 6 gal Campbell Hausfeld compressor with 1/4" quick disconnects at about 90 - 100 psi for metal connectors and 16d nails and have never run out of air. I bought it mainly for the metal connector ability, which it does great, but is also great for down to 6d nails. Just turn down the pressure on the smaller nails.
Question:	Is it difficult to find nails for this hammer
Answer:	Metal connector nails need to be larger around to fit properly in the holes and have the shear strength. If the nail is longer than 2-1/2 inches the gun will not fire by design. I can only find the 1-1/2 21 degree nails on Amazon and Home Depot online. They are expensive, but surprisingly, I tried some 33 degree 1-1/2 inch nails in this gun and it fires normal. I don't see any wear as a result either. I would not try this with longer 33 degree nails because they would angle out of reach of the driver. The gun out performs my old Senco SN60 by a large margin, is lighter, but about an inch taller.
Question:	What is the difference between a round head and a clipped head nailer
Answer:	The round head is the traditional type nail you would find in a box or bin of nails. The clipped head is the round head clipped off to the width of the nail shank on two sides--does not had the holding power of the round head.

Product features

BOSTITCH F21PL

This 21-degree Plastic Collated Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button.

Features:

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
• Patented push button adjustable depth guide sets nails to desired depths
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

High speed valve technology drives over 10 nails per second. High lifetime engine seals and feed system for durability and long life. Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials. Ergonomic design is lighter (4.5 lbs.) than leading competitive Coil roofing mailers. Steel skid plates with rubber inserts protect the tool and help to stop it from sliding. Operating pressure: 70-120 PSI. Over mold grip. Fixed exhaust.

• High speed valve technology drives over 10 nails per second
• High lifetime engine seals and feed system for durability and long life
• Easy to use

User questions & answers

Question:	Does this nail gun come with a plastic carrying/ storage case
Answer:	Tool only no case
Question:	Is this a new nail gun
Answer:	LOL
Question:	Cual es el mínimo y el maximo de las puntillas que lleva
Answer:	Solo lleva un rollo de clavos para madera por lo regular son de un solo tamaño en rollo...Pero en lo grande entra la medida hasta 1 pulgada 3\4 para esa clavadora y mas chicos
Question:	Can u use this nailer to install a fence
Answer:	No!This gun is recommended for roofing installation. You should try a siding/fencing gun like the Hutachi nv65ah2 or something similar. I actually purchased the freeman version for around $160 and it works pretty good.