13 best bostitch siding nailers

Product description

Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2").

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Works with a Variety of Siding Materials, from Soft Wood to Steel

Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use

Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Siding nailer

• Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for added durability. Fastener Diameter .080 .092 Inch
• Soft rubber foot prevents damage to softer woods
• Tool free adjustable exhaust conveniently directs exhaust away from the user
• Ensure using compatible nails to prevent misfires/ensure proper operation.
• NOTE : No carry case is included.

User questions & answers

Question:	Can this gun be used to install azek trim boards
Answer:	No, with standard framing contact arm installed: Uses a 30° paper collated stick nails, in lengths of 2” to 3-1/2” (50-90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm). With metal connector attachment installed: Uses a 30° - 35° paper collated full round head metal connector nails, in lengths of 1-1/2” and 2-1/2” (38 - 64mm) and shank diameters of .131”, .148” and .162”.
Question:	Would this nailer be good for nailing fascia, soffit and exterior trim
Answer:	The only difference I see is about 270$ in price.😊All joking aside, this nailer is a beast. If you go with it I don’t think you will be disappointed.
Question:	can you use this gun on hardie board
Answer:	Yes, this gun will shoot up to a 3 1/4" nails. You will be very pleased with what this gun will handle. Hope it was helpful?
Question:	Will this work on James Hardie trim boards
Answer:	Adjustable depths.."" air..""length of nails.. go for it. If you break through the face back it off a bit and go. Nothing worse than a gun with too little punch. I'd use a smaller head for the trim though..6 penny

Product features

BOSTITCH N66C-1

Features:

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Adjustable exhaust conveniently directs exhaust away

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• The product is 4OZ Tool Lubricant
• Easy to use

• 1 of BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)
• 1 of BOSTITCH VSA4 Vinyl Siding Adaptor Kit

Product description

BOSTITCH PN50 Mini Impact Nailer

From the Manufacturer

The Bostitch PN50 Mini Impact Nailer has a rubber grip designed to insulate and reduce vibration. Lightweight at only 1 lb. It has a 360° swivel air fitting for maximum accessibility in tight spots. The front exhaust directs air away from users palm. Drives Most Common Bulk Finish, Framing & Timber Nails. Ideal in applications such as; Joist Hangers, Metal Connectors, and Driving Nails Into Confined Areas.

• Rubber grip designed to insulate and reduce vibration
• Weighs only 1 lb.
• 360° swivel air fitting for maximum accessibility
• Front exhaust directs air away from users palm
• Drives most common bulk finish, framing & timber nails

User questions & answers

Question:	What CFM and pressure are required
Answer:	You don't use an air pump--you use an air compressor. Set the pressure for 110 pounds.
Question:	What is the operating pressure requirement for this palm nailer
Answer:	It's like a hammer, not a nail gun. It drives nails that are already partly nailed in.
Question:	how do you set this up with an air pump
Answer:	It’s advertised as compatible with Ridgid heads. I got a Ridgid brand spade head and works fine. So it will probably work if you get a Ridgid brand spiral cutter or any other Ridgid head
Question:	where do i get the nails
Answer:	This machine can cut through tree roots.

Product features

BOSTITCH PN50 Mini Impact Nailer

Description:

This Mini Impact Nailer Is Lightweight And Offers A Comfortable Grip. Depend On This Mini Impact Nailer For Convenience And Maximum Accessibility.

• Rubber grip designed to insulate and reduce vibration
• Weighs only 1 lb.
• 360 ° swivel air fitting for maximum accessibility
• Front exhaust directs air away from users palm
• Drives Most Common Bulk Finish, Framing & Timber Nails

Product description

The Factory Reconditioned Stanley Bostitch U/N75C-1 Coil Sheathing/Siding Nailer is perfect for high-volume nailing of wall and roof sheathing. It drives 15-Degree wire weld collated and plastic inserted nails with shank diameters of 0.090-Inch to 0.131-Inch. It has a lightweight aluminum design for added durability. An adjustable depth guide sets nails to desired depths quickly and conveniently. Driving Power 630 Inch/pounds. Fastener Range 1 1/2-Inch to 3-Inch Wire Weld and Plastic inserted coil nails (.090-Inch to .131-Inch Shank) magazine capacity 225-300 nails operating pressure 70-120 PSI thread fitting Type 1/4-Inch NPT.

• Perfect for high-volume nailing of wall and roof sheathing
• Drives 15-degree wire weld collated and plastic inserted nails with shank diameters of 0.090-Inch to 0.131-Inch
• Lightweight aluminum design for added durability
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Contact Tip operation

Product description

The N75C-1 - Coil Sheathing/Siding Nailer is perfect for high-volume nailing of wall and roof sheathing. It drives 15-Degree wire weld collated and plastic inserted nails with shank diameters of 0.090-Inch to 0.131-Inch. It has a lightweight aluminum design for added durability. An adjustable depth guide sets nails to desired depths quickly and conveniently. Weight 4.9-pounds, 2.22 kilos. Driving Power 630 Inch/pounds. Fastener Range 1 1/2-Inch to 3-Inch Wire Weld and Plastic inserted coil nails (.090-Inch to .131-Inch Shank) magazine capacity 225-300 nails operating pressure 70-120 PSI thread fitting Type 1/4-Inch NPT.

• Perfect for high volume nailing of wall and roof sheathing
• Drives 15 degree wire weld collated and plastic inserted nails with shank diameters of 0.090 Inch to 0.131 Inch
• Lightweight aluminum design for added durability
• Adjustable depth guide sets nails to desired depths quickly and conveniently

User questions & answers

Question:	Will the n75c-1 accept maze nails clcem119 3” plastic collated nails
Answer:	Yes, but the trigger was missing a pin. Stole it from my old one to make it work!
Question:	After shooting 1 or 2 nails I have to move next nail in position to shoot. Using wire coil
Answer:	The one I ordered from Amazon did.
Question:	Does it come with both a sequential and contact trigger
Answer:	not sure about the CFM but pressure should be around 90-100 PSI
Question:	DOES IT COME WITH A CASE
Answer:	Operating Pressure: 70 - 120 psi

Product description

The product is Coil Frame Nailer. Easy to use. The product is manufactured in Taiwan.

A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch's utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn't the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls--the inevitable beating nailers take on a job site. The nailer's aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels--it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not have adjustable drive depth. --Jonathon Tudor

• The product is Coil Frame Nailer
• Easy to use
• The product is manufactured in Taiwan
• Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing
• Contact-trip trigger; large-capacity magazine
• Aluminum housing
• Accomodates nails from 1-1/2 to 3-1/4 inches
• Weighs just 8 pounds; 7-year warranty; made in the Taiwan

User questions & answers

Question:	can someone explain why the canister adjusts up to 4" nails but, it can only handle up to 3 1/4" nails
Answer:	With a noise reduction rating of 21, as compared to the 22 of the popular Peltor TAC 100 model, the RangeGuard offers solid, consistent hearing protection. If you're shooting indoors, using an extremely high caliber weapon, or are surrounded by a significant amount of gunfire, your hearing may be compromised. Outdoor protection is excellent, and under most circumstances you are assured of being fully protected. After over 100 hours of use with the RangeGuard (both indoors and outdoors with a wide variety of firearms), I never experienced any kind of noteworthy shortcomings in the noise reduction of the model. As stated, under some circumstances you may feel the audio coming in a bit louder than you'd like, but the average gun owner will never need a stronger model.
Question:	Can I use it for solid hardwood flooring
Answer:	Yes, very easily. They even amplify sounds and make them easier to hear (but not loud noises like gunshots). They have a microphone on each earpiece so you can easily distinguish where sounds are coming from.
Question:	Is this a good framing nailer
Answer:	They'll only "work" if you turn them off. As someone who actually owns these headphones, no - they will not work for lawn mowers. Unless, of course, you turn them off, in which case you're paying a premium for muffs with a microphone and speakers in them. The headphones pick up all outside noise using two forward-facing microphones so that you can "hear" while you're wearing them. The cutoff circuit only engages when it picks up a sudden, sharp noise - like a gunshot, an air nailer, or a hammer blow. Continuous loud noises such as heavy equipment, power tools, saws, airplanes, etc... do not trigger the cutoff and in many instances can *amplify* the noise.
Question:	Will this fit 1 1/2" or 1 3/4" roofing nails
Answer:	These are teal the others are camo green. That's about it.

Product description

Lightweight magnesium design for added durability. Patented push-button adjustable depth guide sets nail to desired depths quickly and conveniently. Coil magazine hold up to 300 nails for high production applications. Aggressive wear guards protect the tool from damage on abrasive surfaces. Adjustable exhaust directs air away from the user. Applications include framing, Sheathing, Siding, fencing, Trusses, decks, bridging, pallets/crating, and wood to masonry. Accepts 2" To 3-1/2" 15 deg Coil framing nails. 1050 in/lb. (Inches per pound) driving power. 70 to 120 PSI (pounds per square inch) operating pressure. Lightweight magnesium design for added durability. This product is manufactured in Taiwan. This product meets customer requirement.

The Bostitch pneumatic coil framing nailer is designed to be impressively rugged and powerful. Its sturdy nature is disguised by a lightweight magnesium housing that's easy to hold and capable of surviving some serious abuse on the job site. This hardy model even has aggressive wear guards that help protect it from damage when you use it on abrasive surfaces.

The N89C-1 has a patented push-button adjustable depth guide to set nails at precisely the desired depths, quickly and conveniently, with minimal downtime between jobs. It also features an adjustable exhaust to direct cast-off air away from your face and your workpiece, for a clearer view of your project.

This model has a driving power of 1,050 in./lbs., and it accepts 15-degree coil framing fasteners from 2 inches to 3-1/2 inches (.099 - .148-inch shank). It operates at 70-120 psi, with a 1/4-inch NPT thread fitting. The N89C-1 has a magazine that holds up to 300 nails. -- Cherie Priest

Applications

Use the N89C-1 for almost any fastening application on the job site or home improvement project. It's perfect for framing, sheathing, siding, fencing, trusses, decks, bridging, pallets and crating, wood, or masonry.

What's in the box

Stanley Bostitch pneumatic coil framing nailer.

Choosing a Pneumatic Nailer

For small household jobs, an old-fashioned hammer is the perfect stand-by. But if you've got a bigger project on your to-do list, then a pneumatic power nailer could be your new best friend. Pneumatic nailers are a great alternative to traditionally powered nailers, because they're capable of providing more power -- and they operate with fewer moving parts, so a pneumatic nailer can take more abuse than its corded or battery-run cousins.

A Word on Air Compressors

All pneumatic tools require a steady supply of controlled, compressed air in order to work properly, and nailers are no exception. Bigger compressors with hardy motors and large tanks generate higher PSI levels and maintain them longer, so you'll probably want a piston-type, two-stage compressor to power your nailer. Smaller or single-stage models are fine for little projects, but if you need a pneumatic nailer, the odds are good that you're looking for some intense PSI and CFM ratings. Sometimes, a pneumatic nailer will come with its own compressor -- or it can be purchased as part of an air tool set.

How Pneumatic Nailers Work

Pneumatic nailers use compressed air power to cock and release the hammer. In order to fire a fastener, a valve opens to let air fill a cylinder -- which has a piston that's driven down hard and fast. This forces the nail out of the gun and into your workpiece. Then the piston recoils, and another nail is loaded.

Important Points to Consider

Check manufacturer's guidelines to find out what pressure (PSI) and volume (CFM) of air will give your pneumatic nailer the best results. Also, keep in mind that any restrictions on the air hose will diminish the tool's performance. Hoses that are very long, contain too much moisture, or are incorrectly sized will reduce air flow. This can prematurely wear out your tool and cause it to perform poorly.

General Features

Most models will feature a rubber nosepiece to prevent scuffing and marring of your workpieces, plus an exhaust system (rear or adjustable) to keep sawdust and debris out of your face and away from your project. Pneumatic nailers usually have an adjustable depth of drive, and depending on the model, they can accommodate nails up to 2-1/2 inches long, in a variety of different gauge sizes. With a powerful enough compressor behind them, they can shoot thousands of nails a day.

• Pneumatic coil framing nailer with an adjustable exhaust
• Patented push button adjustable depth guide sets nails to desired depths quickly and easily
• Lightweight magnesium design; aggressive wear guards to protect the tool from damage on abrasive surfaces
• Magazine holds up to 300 nails
• 12 1/4 inches long, 14 inches high; weighs 8.1 pounds; 7 year limited warranty

User questions & answers

Question:	what is the difference between his one and the $519 one. they have the same n89c-1 number
Answer:	MADE IN CHINA I just bought these because I thought they were not made in China. They are made in China not Germany.
Question:	I am building a fence and Need to drive galvanized 13 gauge 2-2.5 inch nails into cedar pickets, will nailer work? Thank you
Answer:	No they are not adjustable. These were bought for my wife and they just fit her and I would say she has an average head.
Question:	Does anyone know if I can use this gun for lap siding? Blind nailing
Answer:	The tactical sports cost me $150 when I got and after 2 years stopped working. Peltor wanted over $100 to fix them. These cost less and still work after 2 years.
Question:	what compressor to buy for this tool? please advice (for framing
Answer:	I just did my first range shooting today. I was able to borrow a pair of these cups. I wear glasses. I had absolutely NO problems with the seal letting in extraneous noise. Even with 30dB of reduction, the noise is still quite loud, but not enough that your ears will be damaged, or even be ringing, when your shooting day ends. I just put in my order for a pair of them. Highly recommended!

Product description

The NV65AH2 Coil Siding Nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional siding nailer gets even better. Additional features such as the adjustable air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

• SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
• SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
• NO MAR NOSE CAP: Protects material from accidental marks
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

Product features

No mar nose cap attachment

Protects material from accidental marks.

Tool-less depth of drive adjustment

For optimal depth in a variety of applications.

Selective actuation switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic shield

Deflects wire collation for added safety.

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Magazine Loading - Bottom Load

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand

The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio

The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Framing nailer and two quick-change nosepieces.

From the Manufacturer

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications

User questions & answers

Question:	Is it true that the hammer is only "positive placement" for nails up to 2.5" long
Answer:	Yes, pp tip for nails up to 2.5" in length. Framing tip for up to 3.5"
Question:	How is it powered? Is it pneumatic or battery operated and/or use compressed gas cylinders
Answer:	It is pneumatic. I've been using a 6 gal Campbell Hausfeld compressor with 1/4" quick disconnects at about 90 - 100 psi for metal connectors and 16d nails and have never run out of air. I bought it mainly for the metal connector ability, which it does great, but is also great for down to 6d nails. Just turn down the pressure on the smaller nails.
Question:	Is it difficult to find nails for this hammer
Answer:	Metal connector nails need to be larger around to fit properly in the holes and have the shear strength. If the nail is longer than 2-1/2 inches the gun will not fire by design. I can only find the 1-1/2 21 degree nails on Amazon and Home Depot online. They are expensive, but surprisingly, I tried some 33 degree 1-1/2 inch nails in this gun and it fires normal. I don't see any wear as a result either. I would not try this with longer 33 degree nails because they would angle out of reach of the driver. The gun out performs my old Senco SN60 by a large margin, is lighter, but about an inch taller.
Question:	What is the difference between a round head and a clipped head nailer
Answer:	The round head is the traditional type nail you would find in a box or bin of nails. The clipped head is the round head clipped off to the width of the nail shank on two sides--does not had the holding power of the round head.

Product features

BOSTITCH F21PL

This 21-degree Plastic Collated Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button.

Features:

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
• Patented push button adjustable depth guide sets nails to desired depths
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

Drives 16 gauge finish nails from 1-1/4" to 2-1/2" length. Oil-free operation reduces the risk of oil stains. Tool-free jam release mechanism for easy nail removal. Dial-A-Depth control for precise countersinking of nails. Selectable trigger system for sequential or contact operation. 1/4" air fitting, rear air exhaust and belt hook with integrated pencil sharpener. Kit includes: Nailer, 1/4" air fitting, carrying case and extra no-mar tips. Tool weighs only 3.9 lbs. Product dimensions: 11.32"H x 12.5"L x 3.34"W.

• SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool.
• DRIVES: 16 GA Straight Finish Nails from 1 1/4 inch to 2 1/2 inch length.
• TOOL FREE JAM RELEASE MECHANISM: For easy nail removal.
• DIAL A DEPTH(TM) CONTROL: For precise countersinking of nails.
• KIT INCLUDES: Nailer, 1/4 inch Air Fitting, Carrying Case and Extra No Mar Tips.Operating Pressure:70 120 psi

User questions & answers

Question:	Is this made in the USA
Answer:	The BTFP71917 uses straight finish nails.
Question:	Will this take paslode or dewalt nails
Answer:	It has a no mar tip that is specific to this gun although it takes much less pressure on the tip to shoot the gun compared to other guns
Question:	Whats the degre angle on this nailer
Answer:	I disagree with the person who said they wont fit a wide face. I need glasses that are wider and with longer temples than normal. These can be adjusted and they fit me great. So if you have a large head, give these a try
Question:	Where can you buy the standard no-mar tips for this bostitch btfp71917 nailer
Answer:	Our regular safety glasses and safety sunglasses are currently not ANSI Z87.1 certified, but we are looking into the possibility of subjecting the glasses to this certification process in the near future. If OSHA / Z87 certification is a requirement for you, then our over-spec safety glasses might be of interest to you, as they are fully ANSI Z87.1 and OSHA certified. You can check them out here: https://www.amazon.com/dp/B071RSM598

Product description

The BOSTITCH BRN175A bulldog 15 degree Coil roofing nailer combines performance and adjustability to handle roofing applications. This light weight 4.8Lb roofing nailer drives 3/4" to 1-3/4" Coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. There is a wheel to adjust the drive depth so that nails can be properly installed into a variety of materials. The exhaust cap can swivel so that the exhaust is always pointing away from the user, and the shingle guide under the magazine can be adjusted for proper shingle spacing.

• Upgraded engine and feed system improves drive quality, overall performance, and durability
• Dual door MAGAZINE can be closed multiple ways
• Oversized tool free depth adjustment for proper nail setting
• Carbide nose inserts help to protect the nose from wear
• Redesigned grip handle for better feel

User questions & answers

Question:	Does this nailer require a compressor
Answer:	Yes, this is pneumatic powered.
Question:	Where is made
Answer:	The country of origin of the BRN175A is Taiwan.
Question:	Does this also shoot siding coil nails
Answer:	It absolutely will NOT. I thought maybe it would from reading other reviews. It will just jam up every time