12 best headless pin nailers

Product description

Metabo HPT's NP35A micro pin nailer drives 23-gauge headless pin nails, which produce nearly invisible holes.



It can drive 23-Gauge pin nails ranging from 5/8" to 1-3/8" in length. Please note, it is necessary to buy high quality pins to ensure the tool works as expected. Pins with lower grade metal can be less rigid and bend at the point of entry or bend at the point of impact from the tool. Each of these scenarios can cause the tool to jam or the pin not to penetrate the wood as anticipated, especially at longer lengths. Metabo HPT pin nails are manufactured to higher tolerances and perform better in our nailers. For best performance, use the following genuine Metabo HPT pins, available on . 1) 23000SHPT (5/8") 2) 23001SHPT (3/4") 3) 23002SHPT (1") 4) 23003SHPT (1 3/16") 5) 23004SHPT (1 3/8")



Lightweight and compact, the NP35A pin nailer may be used in a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.



Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT

• INCLUDES: NP35A Pin Nailer, Safety Glasses,1/4" NPT Male Plug, No Mar Tip (x2), Hex Bar Wrench, Carrying Case (887572)
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• FASTENERS: 23-gauge headless pins with automatic adjustment for 5/8 In., 3/4 In., 1 In., 1-3/16 In. and 1-3/8 In. fastener lengths
• APPLICATIONS: Great for cabinets, paneling, small moldings and trim, glazing bead, craft work, and picture frame assembly
• DEPTH ADJUSTMENT: Depth adjustment for flush drives into a variety of surfaces
• LIGHTWEIGHT: Only 2.0 lbs, for easy all day use
• TRIGGER: Dual trigger for safe and accurate placement of fasteners

User questions & answers

Question:	Is this electric or used with an air compressor
Answer:	Air compressor.
Question:	What are the options for depth adjustment? Can you adjust to 1/4 inch with a 1/2 inch nail
Answer:	As copy says: Magazine automatically adjusts to 5/8", 3/4", 1", 1-3/16" and 1-3/8" fastener lengths for use on a wide variety of projects. 1/2” isn’t listed as it’s too short. 5/8” is the shortest pin nail. As for it driving the pin nail halfway as you inquired, reducing the required air pressure might help but could jam the unit or cause some other issues.
Question:	Where is this made
Answer:	Metabo was a German Co. sold to a China Co. and it seems the parts are made in both and some from Japan and others countries around the world.
Question:	What is the best pressure to seat the nails properly
Answer:	I run my pressure between 80 and 90 psi and have had no trouble driving the nails all the way in with no head showing both in pine and oak lumber. Below 80 psi and the nails don't go all the way in when I'm using oak.

Product features

Magazine Automatically Adjusts

to 5/8", 3/4", 1", 1-3/16" and 1-3/8" fastener lengths for use on a wide variety of projects

Dual Trigger

for safe and accurate placement of fasteners

Depth Adjustment

for flush drives into a variety of surfaces

Used in a Variety of Applications

including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.

Product description

Air Pin Nailer Kit, Straight, Collation Type Adhesive, Fastener Range 1/2 In. to 1-3/16 In., 23 Gauge, CFM per Shot 0.018, Required Pressure 70 to100 psi, Max. Pressure 100 psi, Magazine Capacity 200, Rear Exhaust, No-Mar Tip, Housing Material Aluminum, Yellow Color, Air Inlet 1/4 In. Male, Length 9-1/8 In., Width 1-5/8 In., Height 7-7/8 In., Tool Weight 2.50 lb., For Use With 23 ga. Pins, Includes (500) 1/2 In. Pins, (500) 3/4 In. Pins, (500) 1 In. Pins and Carrying Case

The Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Headless Pin Nailer delivers the accuracy and comfortable handling you need to make quick work of detailed finish, trim, and woodworking projects. This pin nailer offers you the power of pneumatic action backed by Bostitch's long history of producing innovative fastening technology for dependable on-the-job performance.

Powerful, Adjustable Fastening for Precise, Clean Work

The Bostitch HP118K is well-suited for use with slim or delicate materials that might be split by an 18-gauge nail or brad. With this tool and set of 23-gauge pin nails, you can save time and money by preventing damage to work surfaces. An ideal choice for woodworking applications, the HP118K provides effective fastening for glue sets that are tough or impossible to clamp, and it will help you avoid the witness marks or holes that can be left by other driver heads, letting you create clean finished products.

Designed to keep you in control at all times, this nailer offers an adjustable high/low power control that sets pin depths without requiring you to adjust your compressor setting. It backs this precision with the ability to deliver 60 in./lbs. of driving power, so you can be sure that each pin is securely seated.

With the ability to handle 23-gauge headless pin nails that range from 1/2 inch to 1-3/16 inches, this nailer enables you to utilize a wide range of fasteners for job-specific performance. And its magazine capacity of 200 pins allows you to work without stopping to reload.

Ergonomic Design for Comfort and Convenience

The HP118K offers a full range of design features dedicated to smooth, safe, and intuitive use. It features a low-profile nosepiece that tapers down to the contact point which offers a clear line-of-site for perfect placement. An over-molded grip ensures slip-free handling, and it is balanced to sit comfortably in your hand during extended use. And, for added comfort while you work, the nailer's rear exhaust directs air away from your face. The pin nailer also features a reversible belt hook for convenience on the job.

Its compact body is easy to maneuver, which is of particular importance when doing intricate work like crafting custom cabinetry or picture frames, and, thanks to a durable, lightweight aluminum housing, it weighs just 2.5 pounds.

Reliable, Pneumatic Performance

This lightweight durable tool operates between 70 and 120 PSI and includes a 1/4-inch NPT fitting for easy coupling with your air hose and compressor.

This pin nailer is backed by a manufacturer's 7-year limited warranty.

How to Load the HP118K

1. Depress the spring loaded lever as shown bewlow in loading instructions Fig.1.

2. Pull sliding portion of magazine back as shown bewlow in loading instructions Fig.2

3. Load the stick of pins as shown bewlow in loading instructions Fig.3 with the arrow pattern pointing down as shown. If pins have black dots instead of arrows, the dots should be positioned up.

4. Close magazine as shown bewlow in loading instructions Fig.4 until it latches in the forward position. The tool is now ready for use.

What's in the Box

HP118K 23-Gauge Pin Nailer; 1/4-inch air fitting; 500 each of 1/2-inch pins, 3/4-inch pins, and 1-inch pins; tool lubricant; and carrying case.

Loading Instructions and Available Bostitch Fasteners:

• 1/2 Inch to 1 3/16 Inch 23 Gauge Pin Nailer, Low Profile Nose Piece Tapers for Clear Site
• Adjustable High/Lower Power Switch for Depth Control and Longer Life
• Lightweight and Durable Aluminum Housing
• Includes Nailer, 1/4 inch Air Fitting, Oil, Nail Selection, Carrying Case, and Belt Hook
• 7 Year Limited Warranty

User questions & answers

Question:	What's the difference with other same products
Answer:	Hello, this was a gift so I'm not sure what the difference is but the person I brought this for swears behind this company name
Question:	Can this nailer go through oak - e.g. some oak cove or shoe molding
Answer:	This nailer will go through oak but I had to crank up the air pressure to above 95 psi to make sure it set the pins below the surface. Try it out on a piece of scrap and see what it does for you.
Question:	gun fires, but nails won't come out.What is the problem
Answer:	If the gun sounds like it is firing and no nails are coming out, you need to clear the jamb by removing the front plate. Once clear, the nails should feed. check for gunk on the nails or that it is inserted with the point down. (chisel point is easy to see with a very bright light.)
Question:	Why won't the 1/2" pins stay in place when ever you drive one in, next one jumps from groove
Answer:	I have used both extremes in pin length, 1 3/16 and the shortest I think was 3/8, all with no problem. If the "next one jumps from the groove" as you say, are the pins still in the colated (glued together) row or have the ones you're using been separated before they were loaded into the nailer. Also are you using Bostitch pins or an off brand? I have always used Bostitch pins and I am careful not to separate them before they go into the nailer. This combination seems to always work fine for me. P.A. Schuster

Product features

BOSTITCH Pin Nailer 23 Gauge, 1/2-Inch to 1-3/16-Inch (HP118K)

• Adjustable high/low power control sets pin depth without changing compressor setting
• Low profile nosepiece tapers down to contact point for clear line-of-site
• Lightweight, durable aluminum housing
• Overmoulded grip
• Rear Exhaust
• 19% greater pin capacity for a wider range of fasteners
• Kit Includes: Pin Nailer, 1/4" Air Fitting, 500 each of 1/2" Pins, 3/4" Pins, 1" Pins, Case

Product description

• Uses 23-gauge headless and slight head pin nails from 5/8-Inch to 1-3/8-Inch length
• Long life maintenance free motor to keep from staining the work surface
• Includes: nailer, 2000 pin nails of 3/4-Inch, 1/4-Inch plug with cap, wrench, and carrying case
• Consistent power and penetration to sink 1-3/8-Inch nail sub-flush into oak
• Tool automatically adjusts for different fastener lengths for easier loading

User questions & answers

Question:	Gift wrap available on porter cable
Answer:	Check what the AMZ site shows when you order. My own preference for wrapping on any gift s the transparent type.
Question:	Porter Cable says the gun is maintennance free, yet some folks say put a couple of drops pneumatic tool oil in the air hose prior to use.Whats right
Answer:	While there is no need for pneumatic tool oil it will not harm the unit to add a few drops.
Question:	Will this work with a 6 Gal compressor
Answer:	Absolutely. I currently use one with a 4 Gal compressor. A 6 gal compressor will have no problem keeping up. Minimum recommended compressor requirements are: Air Pressure 60psi, Air Flow 1.6 CFM. This should be well within the capabilities of your compressor.
Question:	Is this an oil free nail gun
Answer:	No..It not not an oil free nail gun.

Product description

GREX 23 Gauge 1-Inch Length Headless Pins, 10M/Box. For use in GREX Model no. P630, P635, P645, P645L, P650 & P650L.

• 23 Gauge galvanized and coated headless pins
• Designed to use with P630, P635, P645, P645L, P650 and P650L Grex pinner
• Precision drawn wire assures consistent accurate pin optimized tensile strength for each pin length
• Durable yet flexible collation minimizes strip fragmentation
• Measures 1 inches length
• 23-Gauge galvanized and coated headless pins are designed to use with p630, p635, p645, p645l, p650 and p650l grex pinner
• Precision drawn wire guarantees consistent accurate pins

User questions & answers

Question:	Can I use this nails for p318 Ryobi nailer
Answer:	Yes
Question:	Will these rust/corrode outside
Answer:	Dear customer, hello, “The maximum depth between the jaws and the screws that tighten the jaws is approximately 1.10 inches (28 mm) - we recommend that you leave some room for safety and do not exceed 1 inch in depth when in use Standard Jaw Opening：30mm（1.2in） Maximum Jaw Opening: Approx 35mm（1.4in) Jaw width： 50mm（2in） Can hold the fixed platform thickness: Approx 30mm（1.2in）
Question:	Has anyone ever used these pin nails in other guns? Senior? Porter cable
Answer:	Dear customers, This product is a full metal materia cast iron, but the surface is painted. Its non-slip mat material is rubber.
Question:	Has anyone used these with a dewalt dwfp2350? pin nailer
Answer:	this is a small vise that can be anchored. If you can mount what ever it is your working on in this vise I think you could use a dremel or any rotary tool with it.

Product description

Arrow's PT23G pneumatic pin nailer is great for many trim jobs and hobby work because of its unique headless pin nails that are less noticeable after painting.

• Easy quick load magaizine
• Adjustable exhaust cover directs air away from the user
• Overmold grip for comfort during extended use

User questions & answers

Question:	Could I use this to attach trim to a concrete basement wall
Answer:	This shoots very thin 23 gauge nails. I would not attempt this with a concrete wall. There could be a chance of it ricocheting off the wall. A concrete wall should be studded out and drywalled before installing trim but if you need to do this you should attach the trim with liquid nails.
Question:	Is this a one time use pin nailer
Answer:	Hello, The Arrow PT23G pneumatic pin nailer uses strips of pin nails in various sizes. The pin nailer fires pin nails every time the user holds the tool against a surface to engage the safety mechanism and then pulls the trigger until the strip of pin nails is depleted. Hope this answers your question! Feel free to contact us at or 800-776-2228. - Your Arrow Fastener Team
Question:	What length of nails
Answer:	These are 23ga pins, 1 inch is the largest. Works great for small detail glue ups.
Question:	Is this gun oil-less , or does it require oil maintenance
Answer:	I always put a drop on oil in my air guns. That said I have not been impressed with this gun, I actually purchased another gun to replace it after my second use.

Product features

Arrow Fastener PT23G Arrow 23G Pin Nailer

Arrow’s PT23G Pneumatic Pin Nailer is great for trim jobs, crafts, and hobby work that require headless pin nails. The tool features a lightweight compact design, adjustable exhaust cover, contact safety, and overmolded grip. PT23G comes with all necessary fittings and operates on home compressor units up to 120psi. The easy to load magazine makes loading nails and clearing any jams easy, reducing project frustration and down time.

Our Brand

Since 1929, Arrow Fastener has embodied the commitment to family values instilled by its founder, Morris Abrams. That spirit of compassion and generosity is reflected in our products and programs, which enable families to complete products and learn together. It’s also what’s helped us lead the industry in innovation, style and functionality for over 80 years

Product description

These items are Factory Reconditioned, some show more wear than others. RYOBI introduces the 18-Volt ONE+ Cordless AirStrike 23-Gauge 1-3/8 in. Headless Pin Nailer. This headless pin nailer drives 1/2 in. to 1-3/8 in. pins. he dry-fire lockout protects your pin nailer and extends its life. The double-action trigger design allows for convenient, sequential driving and the 2-included non-marring pads keep the work surface free of tool marks. The LED light optimizes vision throughout the job and GRIPZONE over-mold adds comfort. These items are Factory Reconditioned, some show more wear than others

• Drives 1/2 in. to 1-3/8 in. 23-Gauge pin nails
• Double-action trigger design for sequential driving
• non-marring pads to keep work surface free of tool marks
• Dry-fire lockout feature extends tool life

User questions & answers

Question:	Picture shows battery and charger description shows shipped in bulk but in product section it says battery no so what is it are battery and charger in
Answer:	Battery and charger are included
Question:	What size gauge is it
Answer:	it (the width of the nail) would takes 23 nails to make an inch. Hence 23 gauge
Question:	What nails are compatible with this pin nailer
Answer:	All 23g sizes
Question:	It says battery and charger in bulk package. Is the battery and charger included
Answer:	I only purchased this item for someone else who will use it. Product description listed no battery included. Yes I

Product description

Minimum Recommended Operating Pressure (psi)- 60

From the Manufacturer

The Grex P650L 23-gauge 2-Inch length headless pinner features grex's patented self-adjusting magazine design that accommodates fasteners from 1/2-Inch up to 2-Inch, a total of 12 different lengths. An added feature is the built in lock-out mechanism that prevents dry firing of the tool when only several pins are remaining, ensuring a pin is driven every time. If necessary, a manual over-ride button of the lock-out mechanism allows the last few pins remaining in the magazine to be driven. Equipped with an extended narrow nose to access corners and tight areas with precision, this lightweight pinner is designed ideally for intricate finishing and trim work that allows secure fastening of the smallest decorative trim with a nearly invisible hole – no splitting or puttying.

• Lock-out mechanism that prevents dry-firing of tool
• Shoots fasteners up to 2-inch length easily, even in hardwoods
• Patented magazine design eliminates need to adjust for different fastener lengths
• Powerful motor penetrates fasteners through the hardest materials
• Narrow nose reaches tight areas and corners for detailed trim work

User questions & answers

Question:	The driver kit broke after 7 times of use and I contacted grex and they said that that is not covered can someone explain me why
Answer:	yeah,you are right,the weight of this vise is 15kg.thanks a lot for you to indicate that,we had correct the wrong information.
Question:	It is not working after 6 months of regular use can I return it for a replacement
Answer:	I purchased this item a year ago and I mount it on my drill press where the bottom part of the vise is stationary it does not interfere with the turning handle. It is very heavy and sturdy. But with any tool or part, (regular use and metal to metal friction) wear is normal. When this happens, I will do my own tweaking to re-tighten or modify any flaws as needed. It's cheap enough to take that chance. If you want to mount it to a flat surface like a bench away from the edge, use a base that would give you clearance to turn the lower arm freely. Hope this helps!
Question:	My grex nailer says do not use pins of 1 1\4 and I do not know why
Answer:	The jaws themselves are 1 and 9/16 of an inch tall, however to the bottom of the vice to the top of the jaws is 2 and 1/2 inches.
Question:	Anyone knows where to get the front green tip
Answer:	Dear Brian C. It is of course powerful enough, Mini Vise body is made New upgraded cast iron manufacturing, strong and sturdy, a handy miniature Vise. But please pay attention to whether his size can meet your requirements. Standard Jaw Opening: 30mm (1.2in) Maximum Jaw Opening: Approx 35mm (1.4in) Jaw width: 50mm (2in) Can hold the fixed platform thickness: Approx 30mm (1.2in) Package Weight : 775G /1.71 lb Package dimensions(L*W*H): 125*125*65mm (4.9x4.9x2.6in) I am honored to answer your questions.

Product description

The Freeman PP123 Pneumatic 23-Gauge 1" Micro Pinner is a woodworker's dream come true, and is perfect for all types of detailed trim, glazing strips, jewelry cases, picture frame assembly, and hobbies and crafts. This air powered pin nailer is compatible with 23 gauge headless micro pins from 15/32" to 1", which leave a nearly invisible hole while still driving into dense wood with ease. An ergonomically engineered body results in a balanced and extremely lightweight tool great for using over long periods of time. A comfort grip handle reduces fatigue and increases control, making this durable nail gun capable of very precise pin placement. An anodized aluminum cylinder and magazine extend the life of this small but powerful headless pin mailer. The Pneumatic 23-Gauge 1" Micro Pinner includes a belt hook, safety goggles, air tool oil, and adjustment tools.

• Nailed It: This pneumatic pinner uses 23 gauge headless pin nails ranging from 1/2" to 1". It features a lightweight and durable aluminum body, ergonomic grip handle, reversible belt hook, and trigger with a safety mechanism that prevents accidental firing.
• Safety and Precision Design: This pinner is ideal for custom applications like crafts, tacking decorative trim, small picture frames, hobby work, jewelry cases, and molding. It features a pin size selector, air filter / anti-dust cap, and ergonomic comfort grip handle.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Does it have rubber tip
Answer:	The vise mounts by clamps on the flat surfaces at the front and rear. There are no mounting holes.
Question:	What size compressor is recommended
Answer:	The holes on the sides are not threaded. They are .250 dia.
Question:	Is it possible to adjust the depth penetration of the nail
Answer:	You can use a vise toe clamp which you should be able to find on Amazon.
Question:	Will this unit consistently and successfully shoot 1" pins in 1/2" thick white oak planks
Answer:	6 inches center to center.

Product description

The Makita 23 gauge pin nailer (model AF353) offers an array of features and powerful performance in a compact size. The AF353 has a side, Drop-In loading magazine that accepts standard 23 GA. Headless pins sized 5/8", 11/16", 3/4", 1", 1-3/16", and 1-3/8". the nail lock-out and red window alerts the user when to reload pins as the 2-finger trigger is used for controlled firing. With a compact size and weighing in at only 2 lbs., the AF353 was engineered for all-day professional use ideal for installing molding, chair rail, Tacking trim, glass retainers to doors, cross pinning dowels & joints, cabinets, paneling, glazed bead, craft work, picture frame assembly, window beading, rattan furniture, and a whole host of other woodworking applications. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a rear exhaust port that directs exhaust air away from the user and work surface, a built-in air Duster that provides convenient air flow to clear your workspace, and 2 removable no-mar tips with sightlines for increased pinning accuracy.

• Powerful motor drives standard headless pins sized 5/8", 11/16", 3/4", 1", 1-3/16" and 1-3/8"
• Aluminum body, Magazine and cylinder for strength and durability; Weighs only 2 pounds
• Nail lock-out mechanism protects tool and work surface from pin-less blank fires (dry-fires)
• Side, Drop-In loading Magazine holds upto 130 nails for maximum efficiency
• Built-in air duster provides convenient air flow to clear work surface

User questions & answers

Question:	I have purchased two of these guns and im having problems with the nails hanging up on both of them,i took one of them apart to see what the problem i
Answer:	This gun requires a lot of oil both in the air chuck and the magazine area. I put oil in both areas everyday but we use this gun for 6 to 8 hours straight. It also likes porter cable pins. I’ve used geez and had the same problem
Question:	Does this work with 1"14 pins
Answer:	It's excellent tool and get the jab finish and clean
Question:	Adjustable depth
Answer:	Does not have a way to adjust the depth of impact. It’s a great fun when it functions but I’ve broken two of the slide catches on back of gun
Question:	does this pin nailer accept slight head pin nails or only headless nails
Answer:	Headless pin nails , to my experience

Product features

Makita AF353 23 Gauge, 1-3/8" Pin Nailer

The Makita 23 Gauge Pin Nailer (model AF353) offers an array of features and powerful performance in a compact size. The AF353 has a side, drop-in loading magazine that accepts standard 23 ga. headless pins sized 5/8", 11/16", 3/4", 1", 1-3/16", and 1-3/8". The nail lock-out and red window alerts the user when to reload pins as the 2-finger trigger is used for controlled firing. With a compact size and weighing in at only 2 lbs., the AF353 was engineered for all-day professional use ideal for installing moulding, chair rail, tacking trim, glass retainers to doors, cross pinning dowels & joints, cabinets, paneling, glazed bead, craft work, picture frame assembly, window beading, rattan furniture, and a whole host of other woodworking applications. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a rear exhaust port that directs exhaust air away from the user and work surface, a built-in air duster that provides convenient air flow to clear your workspace, and 2 removable no-mar tips with sightlines for increased pinning accuracy.

Includes:

3 Year Warranty

Pnewumatics - 3yr. Warranty.

Each Makita Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund.

Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited does not apply to Makita Pneumatic Nailer Accessories.

This warranty does not apply where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. Normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The Pneumatic Nailer has been abused, misused, improperly maintained or operated. Improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose,' after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Hitachi NP35A 1-3/8-Inch Pin Mailer fires 23-gauge headless pins which produce near invisible holes. The NP35A magazine automatically adjusts to 5/8-inch, 3/4-inch, 1-inch, 1-3/16-inch and 1-3/8-inch fastener lengths for use on a wide variety of projects. The large housing shield, removable nose plate and rear exhaust protect delicate work surfaces from costly damage. Features such as a visual reload indicator, adjustable depth of drive and large capacity magazine reduce downtime and offer convenience to the user. Lightweight and compact, the NP35A may be used in a variety of applications including cabinets, paneling, small moldings, trim, glazing bead, craft work and picture framing. This package comes with safety glasses, 1/4-inch NPT male plug, no-mar tip, hex bar wrench and carrying case. The large fastener capacity means fewer reloads and less downtime. Also, the depth adjustment is used for flush drives into a variety of surfaces. The Hitachi NP35A 1-3/8-Inch Pin Mailer tool is warranted to the original purchaser to be free from defects in materials and workmanship for a period of 1-Years from the original purchase date. In addition any pistons, drivers and O-rings associated with this tool are covered by a 90-day limited warranted. Hitachi Power Tools provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

• Micro pinner, pinner, 23ga nailer
• Large fastener capacity for fewer reloads and less downtime
• Dual trigger for safe and accurate placement of fasteners
• Rear exhaust directs oil and debris away from the work surface
• Reload Indicator for easy visual recognition of low nail quantities to avoid dry firing
• Micro pinner, pinner, 23ga mailer
• Large fastener capacity for fewer reloads and less downtime

User questions & answers

Question:	Is there case included
Answer:	Should work in any 23 gauge pin nailer. I have a Ridgid pin nailer and they work great, never a problem.
Question:	Is there a warranty for this tool hatachi np35a
Answer:	The Shars vise is one-piece steel construction. Body and jaws hardened to Rc 58-62

Product description

Introducing the newest innovation to the Ryobi AirStrike Family, the Ryobi 18-Volt ONE+ 23GA pin nailer. The Ryobi pin nailer drives 1/2 in. to 1-3/8 in. pins and can shoot up to 3800-pin nails per charge with a P108 18-Volt battery. The dry-fire lockout protects your pin nailer and extends its life. The double-action trigger design allows for convenient, sequential driving and the 2-included non-marring pads keep the work surface free of tool marks. The LED light optimizes vision throughout the job and GRIPZONE over-mold adds comfort. This tool includes an edge guide for consistent placement of pins, a belt clip and 500-1 in. 23-Guage pin nails.



Gripzone over-mold for added comfort

non-marring pads to keep work surface free of tool marks

Up to 3500-pin nails per charge with P108 battery

Dry-fire lockout feature extends tool life

Double-action trigger design for sequential driving

Includes edge guide for consistent placement of nails

LED light feature for optimal vision

Drives 1/2 in. to 1-3/8 in. 23GA pin nails

Part of the Ryobi ONE+ Family of 100-products



Nailgun Angle: 0

Nail Gauge: 23

Reconditioned: No

Tools Product Type: Air Tool

Maximum Fastener Size: 1-3/8 in

Air Tool Type: Air Nailer

Included: Nails

Energy Type: Cordless Electric

Minimum Fastener Size: 1/2 in





Product Width (in.): 3.50 in

Product Depth (in.): 10.5 in

Product Height (in.): 8.88 in

• Double-action trigger design for sequential driving
• Dry-fire lockout feature extends tool life
• LED light feature for optimal vision
• GRIPZONE overmold for added comfort
• Drives 1/2 in. to 1-3/8 in. 23-Gauge pin nails

User questions & answers

Question:	what projects can you use the ryobi pin nailer for
Answer:	I’m not sure about the Ryobi , I use these nails in my Hitachi pin nailer.
Question:	Will this work on stair treads
Answer:	If left exposed they probably will. When I use them they are countersunk, thus I don't see a real problem with rust there. Hope this helps.
Question:	Why is this item chapter somewhere else
Answer:	23 gauge pins will work with any other make provided they are a 23 gauge gun.

Product description

SPECIFICATION

Model: P630C

Net Weight: 2.03 LBS/0.92 KG

Gross Weight: 2.4 LBS/1.1 KG

Power Source: Air-powered

Air Pressure: 60-100 PSI

Air Inlet: 1/4'' NPT

Capacity: 150 PCS



FEATURES

· Narrow nose for easy aiming allows access to tight angle and hard-to-reach areas

· Lightweight and well-balanced body with ergonomic rubber handle, weighs only 2.03 LBS/0.92 KG

· Safety double trigger with light-touch design reduces operating fatigue and prevents accidental injuries

· Extended magazine with tail-latch design can load 150 PCS pins, easy & quick opening, higher efficiency

· Automatically adjusts different lengths of Pins for easier loading & avoids jamming

· Capacity-visible magazine designed for observing capacity of pins and replenishing in time

· Ideal for cabinets, mirror, crafts, paneling, picture frame assembly, chair rail, tacking trim, window beading, furniture, etc

· Compatible with 23 Gauge 3/8"-1 3/16"(10-30 mm)Length Micro Headless Pins

**PACKAGE INCLUDES 10,000 PCS 1/2"(12MM) HEADLESS PINS**



FASTENER

23 Gauge 3/8" to 1-3/16"(10-30 mm)Length Micro Headless Pins

**Headless Pins can be purchased from us, please contact us if you need**



MAINTENANCE

1-2 drops of oil before use, keep the interior lubricated



PACKAGE INCLUDING

1 × Nailer with necessary accessories

10,000 × 1/2-inch(12mm) Headless Pins



CONTACT US

You are most welcome to contact us with any questions or service required, all questions will be replied within 24 hours

Customer Support Online: 9 am-18 pm (GMT +8)

• Automatically adjusts different lengths of Pins for easier loading and avoids jamming. Lightweight and well-balanced body with ergonomic rubber handle, weighs only 2.03 LBS/0.92 KG.
• Safety double trigger with light-touch design reduces operating fatigue and prevents accidental injuries. Narrow nose for easy aiming and hard-to-reach areas
• Extended magazine with tail-latch design allows loading 150 PCS pins, easy & quick opening, higher efficiency
• Ideal for cabinets, mirror, crafts, paneling, picture frame assembly, chair rail, tacking trim, window beading, furniture, etc
• Compatible with 23 Gauge 3/8" to 1-3/16"(10-30 mm)Length Micro Headless Pins **PACKAGE INCLUDES 10,000 MICRO HEADLESS PINS**