13 best hitachi framing nailers
Hitachi, now known as Metabo HPT (Hitachi Power Tools), is a well-known manufacturer of power tools and other equipment, including framing nailers. Their framing nailers are widely used in construction and woodworking for driving nails into various materials. Here is some information about Hitachi framing nailers:
Types of Framing Nailers: Hitachi offers a range of framing nailers, including pneumatic (air-powered) and cordless models. These nailers are designed for different applications and user preferences.
Power Source: Pneumatic framing nailers require an air compressor to operate, while cordless models are powered by rechargeable lithium-ion batteries. Cordless framing nailers offer more mobility and flexibility on job sites.
Nail Size: Hitachi framing nailers can accommodate various nail sizes, typically ranging from 2 inches to 3-1/2 inches. This versatility allows users to handle different framing and construction tasks.
Depth Adjustment: Many Hitachi framing nailers come equipped with depth adjustment features, allowing users to control the depth at which nails are driven into the material. This is important for achieving the desired level of nail penetration without damaging the workpiece.
Sequential and Bump Firing: Hitachi framing nailers often offer both sequential and bump firing modes. Sequential firing requires the user to press the trigger for each nail, providing precise control. Bump firing allows for faster, continuous nail firing when the trigger is held down.
Magazine Capacity: The magazine of a framing nailer holds a specific number of nails. Hitachi models typically have a high-capacity magazine, reducing the need for frequent reloading.
Durability and Build Quality: Hitachi is known for producing durable and reliable tools.Their framing nailers are designed to withstand the rigors of construction and heavy-duty use.
Safety Features: Safety is a top priority in power tools. Hitachi framing nailers often include features such as anti-dry fire mechanisms to prevent damage to the tool and workpiece, as well as a no-mar tip to protect the material's surface.
Brand Reputation: Hitachi has a strong reputation in the power tool industry for producing quality tools with innovative features. In 2018, the company's power tool division was acquired by KKR and renamed Metabo HPT.
Accessories and Warranty: Hitachi typically offers a range of accessories and provides warranties for their framing nailers, ensuring customer satisfaction and support.
Overall, Hitachi (Metabo HPT) framing nailers are respected tools in the construction and woodworking industries. They are known for their quality, durability, and versatility, making them a popular choice among professionals and DIY enthusiasts alike for framing and other nailing tasks in various projects.
Below you can find our editor's choice of the best hitachi framing nailers on the market
Metabo HPT Pneumatic Framing Nailer | 2-Inch up to 3-1/4-Inch Plastic Collated Full Head Nails | Tool-less Depth Adjustment | 21 Degree Magazine | Selective Actuation Switch | 5-Year Warranty (NR83A5)
Metabo HPT
Product description
The NR83A5 Full Round Head framing nailer with depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and Mobile home and modular home construction. The NR83A5 is like the original NR83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A.The NR83A5 relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.Operating Pressure : 70-120psi
- Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
- Cylinder valve drive system for rapid response and increased durability
- Selective actuation on trigger allows for either sequential or contact nailing
- Rafter hook is included for convenience on the jobsite
- Tool-less depth of drive adjustment for improved control and flexibility when fastening into various types of wood
- Equipped with an industrial 2-piece magazine that can withstand jobsite abuse
- Accepts two strips of nails at a time and locking feeder system makes replenishments quick and easy
- Open nose design for easy extraction of a jammed nail
User questions & answers
| Question: | Is this unit easy to use |
| Answer: | Yes |
| Question: | this is a pneumatic nailer that is corded. the picture shows a air connection to put air to it. is the information you show as corded incorrect |
| Answer: | You may have mistaken the air hose for an electrical cord. In 40 years in this line of work, I've never seen both air hose and a power cord connected to any pneumatic tool. |
| Question: | Can. You shoot clipped head nail in it |
| Answer: | Hi there. This nailer only accepts full round head nails. Hope this helps! |
| Question: | Where is it made |
| Answer: | At Hitachi Factory |
Product features
Depth Adjustment
Included for convenience on the jobsite
Selective Actuation
On the trigger allows for either sequential or contact nailing
Ergonomic Non-slip Rubber Grip
On the handle helps maintain a secure hold and comfort during use
Lightweight and Well-balanced
For easy maneuverability
Metabo HPT Framing Nailer, The Pro Preferred Brand of Pneumatic Nailers, 21° Magazine, Accepts 2" to 3-1/2" Framing Nails, (NR90AES1)
Metabo HPT
Product description
The NR90AES1 framing nailer drives plastic collated nails from 2" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design."
Weighing only 7. 5 lbs, this framing nailer is easy to use all day, while still providing the power similar to other bulkier and heavier framing nailers.
The NR90AES1 framing nailer is great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.
The redesigned head guard of the NR90AES1 framing nailer allows for a faster and easier disassembly process, saving valuable time during tool main10ance.
- NAILER: 21 degree plastic collated framing nailer
- APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
- LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
- SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
- TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
- FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
- AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
User questions & answers
| Question: | Aside from the name, is there any difference between this and the hitachi nr90aes |
| Answer: | Good morning, No difference at all. Same exact tool other than the name. Have a wonderful day :) |
| Question: | Can u use this gun to use on concrete wall faring strips |
| Answer: | This gun shoots a plastic collated nail with the angle of the nails at 21 degrees. It shoots up to a 3 1/2” nail. It will shoot nails into wood but not concrete. Hope this helps! |
| Question: | Can the air inlet fitting be changed to a different size? my compressor (craftsman cmec6150) has 1/4" npt. nailer has 3/8" inlet |
| Answer: | Absolutely, it will allow more air flow with less pressure. |
| Question: | Does this nailer take 22 degrees nails |
| Answer: | The variance on the 20-22 Degree Nailers is 19.5 to 22 Degrees. There is no separate difference between any of these tools that are designed for 20 Degree Plastic Collated FRH Nails. Anybody who makes a statement otherwise does not know what they are talking about, or has bought some bad nails in the past and it got blamed on the 1 Degree difference. First off, unlike Senco, Bostitch and Paslode, who manufacture most of their Nails or govern the quality of the spec, most manufacturers of pneumatics do not manufacture their own nails, they source to the lowest bidder, which means you can get some real junk. You get what you pay for. Most of the North American produced product is of good quality. |
Hitachi NR90AES1 Framing Nailer, 2-Inch to 3-1/2-Inch Plastic Collated Full Head Nails, 21 Degree Pneumatic, Selective Actuation Switch, 5-Year Warranty (Discontinued by the Manufacturer)
Hitachi
Product description
The NR90AE(S1) framing nailer drives plastic collated nails from 2" to 3-1/2" in length and features Hitachi's next generation "Industrial Design". The newly redesigned head guard allows for a faster and easier disassembly process, saving you valuable time during tool maintenance. The NR90AE(S1) weighs only 7.5 pounds, making it easy to use all day, while still providing the power of bulkier, heavier nailers. A selective actuation switch adds the convenience of being able to quickly change between bump or sequential fire and the tool-less depth of drive eliminates the need to adjust the pressure at the compressor. The simple two-step loading makes fastener replenishment quick and easy, reducing downtime. Includes Safety Glasses (875769). Air Pressure PSI: 70 – 120, Air Consumption @ 100 PSI scfm .09, Applicable Nails Diameter in: .113 – .148, Length in: 2 – 3-1/2, Nail Capacity: 64 (.131), Magazine Angle: 21 Degrees, Magazine Loading: Rear, Actuation: Selective, Depth Adjustment: Tool-less, Jam Clearing: Open Nose
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
- New head guard design allows for quicker disassembly during tool maintenance
- Lightweight and well balanced for ease of maneuverability and less user fatigue
- Selective actuation allows for quick changes between sequential and contact nailing with the flip of a switch
- Tool less depth adjustment to countersink or flush drive into a variety of materials
- Two piece anodized aluminum magazine making repairs or replacements easy and with minimal expense
- Two step nail loading allows for quick and easy reloads
- Rubber grip provides comfort and ensures a secure grip
User questions & answers
| Question: | will it fit between studs or joists that are 16" o.c? Or does anyone know how big the nailer is from the tip to the top of the gun |
| Answer: | 50 inches to the right side of the blade. |
| Question: | How do you oil this nailer? And how often |
| Answer: | mine worked great. I did put pipe dope on it. |
| Question: | Is this gun for full round head nails |
| Answer: | No |
| Question: | What is the difference between this one and the old one (nr90aes |
| Answer: | This kit comes with a flip-top white carton box that holds all the contents. |
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
PORTER-CABLE
Product description
The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.
- NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
- CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
- INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
- BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
- 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.
User questions & answers
| Question: | Does this come with a charger |
| Answer: | This one does come with a battery & charger, but they sell a model without a charger |
| Question: | Would this tool work to repair my fence |
| Answer: | Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too. |
| Question: | Will it go through 1" oak trim |
| Answer: | yes |
| Question: | can i use multiple lengths of nails |
| Answer: | 5/8 inch through 2 inch nails....awesome gun...i am so happy with it |
Hitachi NR83A5 3-1/4" Plastic Collated Framing Nailer with Rafter Hook
Metabo HPT
Product description
Sometimes in order to make things better you need to take them back to their original design. With that being said here we have the all new and at the same time like the original NR83A5. The NR83A5 has the same legendary durability and reliability you have come to trust with Hitachi, but now with an improved trigger design and sharing all the same internal parts as the original NR83A. Relying on the same cylinder valve drive system as the original NR83A from the 80's, the NR83A5 offers both a rapid response and some serious driving power. With the power to drive 2” – 3-1/4” nails into even the toughest materials and tool-less depth of drive for convenient flexibility, there is no job this tool can’t handle. With the selective actuation now on the trigger we not only reduced the total number of parts in the trigger but also eliminated all composite parts.
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
- Cylinder valve drive system for rapid response and increased durability. Loading capacity 64 70 nails
- Selective actuation on trigger allows for either sequential or contact nailing
- Rafter hook is included for convenience on the jobsite
- Tool less depth of drive adjustment for improved control and flexibility when fastening into various types of wood
- Open nose design for easy extraction of a jammed nail
- Ergonomic non slip rubber grip on handle helps maintain a secure hold and comfort during use
User questions & answers
| Question: | Is this machined for a traditional rafter hook |
| Answer: | 2 to 3 days from USA |
| Question: | What degree of nail will it use |
| Answer: | Taiwan |
| Question: | Is shipping really 1 to 2 months |
| Answer: | I believe it will only work with 18 gage. It will shoot up to 2" long nails and does very well with them. |
| Question: | Taiwan or china |
| Answer: | Yes. The box includes a pair of safety glasses and a spot for storing nails. |
Product features
A Tool That Will Sort You Out
The Hitachi NR83A5 3-1/4" Plastic Collated Framing Nailer comes with a cylinder valve drive system for a rapid response and an increased durability. With a massive loading capacity of 64 to 70 nails, you will easily be able to work on home improvement projects with ease. This power tool also comes with a selective actuation on the trigger, allowing for either sequential or contact nailing.
Convenient on the Jobsite
This power tool by Hitachi also features a rafter hook, giving you the ultimate convenience. The tool less depth of drive adjustment provides an improved control and flexibility when fastening into various types of wood. Not only will you find this tool convenient, but also find it super easy to use.
Ergonomic and Comfortable
The open nose design of this power tool makes is simple for you to extract a jammed nail from any surface. In addition, the ergonomic non-slip rubber grip on the handle helps in maintaining a secure hold and comfort during use.
Durable and Reliable
With an improved trigger design, the Hitachi NR83A5 3-1/4" Plastic Collated Framing Nailer offers a rapid response and stunning driver power. This power tool can drive nails even into the toughest of materials wits ease and minimum manual effort.
Metabo HPT Cordless Framing Nailer Kit, 18V, Brushless Motor, 2" Up To 3-1/2" Framing Nails, Compact 3.0 Ah Lithium Ion Battery, Lifetime Tool Warranty (NR1890DRS)
Metabo HPT
Product description
The Metabo HPT NR1890DRS 18V cordless framing nailer Hitachi power tools is now Metabo HPT. Same tools. New name. The Metabo HPT NR1890DRS 18V cordless plastic strip framing nailer completely raises the bar for cordless framing nailers. Get the power and performance of Metabo HPT (formerly Hitachi power tools) pneumatic nailers with the freedom of cordless technology. This cordless framing nailer is ideal for all construction framing applications along with punch-out work on a jobsite. Get quick in-and-out operation with minimal hassle and professional results. Designed so you no longer need to worry about dirty hoses, loud compressors or expensive Gas cartridges. High stable driving power allows the nailer to drive 3-1/2” nails into even the toughest of engineered lumber with ease Equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nailer, but offers total cordless freedom. Sealed compressed air drives each nail instant drive performance means there is zero ramp up time to drive nails drive up to 2 nails per second and up to 400 nails per charge using the compact 3.0Ah battery. Recoil feels like a pneumatic nailer. Best of all, no air tank required. Covered by Metabo HPT lifetime Lithium Ion tool & 2-year Lithium Ion battery & 1 Year charger. Dry fire Lock out system prevents nailer from driving when fasteners are low for added safety. Ergonomically formed soft grip handle provides comfort and ensures a secure hold. Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use. Pivoting rafter hook for easy storage when cordless nailer is not needed. 10. 8 lbs. And well balanced for easy maneuverability.
- Same tools. New name. Hitachi power tools have renamed to Metabo HPT
- Cordless Framing Nailer
- Included: NR1890DRS, Compact 3. 0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses
- Drives plastic strip nails from 2" to 3 1/2" at 2 nails per second and up to 400 nails per charge
- Zero Ramp up time: air spring system increased driving speed and provides recoil like a pneumatic nailer
- Unique air spring drive system: compressed air drives each nail
- Selective actuation: transitions between sequential mode and bump Fire mode
User questions & answers
| Question: | This nail gun is for 21 degrease. ? Or for the convencional framing nails |
| Answer: | 21° and 30° are both conventional framing nails. But this is a 21° nailer. |
| Question: | Just to make sure, the cordless nail only does bring a battery, fast charger, bag, and safety glasses |
| Answer: | Yes, and an M5 Allen Wrench. The Fast Charger is the UC18YFSL and it will charge the 3.0 Ah battery in 45 min. There is a Rapid Charger (UC18YSL3) that charges the same battery in 30 min. |
| Question: | Garantia pistola |
| Answer: | We offer a 60 day warranty. Hitachi offers a one year from date of purchase. All warranty issues after the first 60 days must go directly through Hitachi. Have a great day. |
| Question: | Will this gun dry fire? I just bought it and charged the battery but it doesnt fire. Does it have to have nails in it to fire |
| Answer: | No it will not, nor should you try to dry-fire a nail gun. It's generally very bad on the tool. It requires about three or four nails in it to fire, depending on the size of the nail. Which means that once you us it, the gun is NOT EMPTY just because it won't fire the last nail or two; there is every chance that if you drop it or kick it out of the way it will manage to fire one of the remaining nails. Always treat this nail gun and any other nail gun like it's ready to fire. |
Product features
Unique Air Spring Drive System
Uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives
Tool-less Depth of Drive Adjustment
For a professional finish with varying materials
Selective Actuation on the Control Panel
Transitions between sequential mode and bump fire mode, when rapid nailing is preferred. Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime
Pivoting Rafter Hook
For easy storage when nailer is not needed
Metabo HPT Framing Nailer, Pneumatic, 2-Inch up to 3-1/4-Inch Plastic Collated Full Head Framing Nails, 21 Degree Magazine, 5-Year Warranty (NR83A5S)
Metabo HPT
Product description
The NR83A5(S) Full Round Head framing Nailer without depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and Mobile home and modular home construction.
The NR83A5(S) framing nailer is like the original NR83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A.
The NR83A5(S) framing nailer relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.
- Same tools new name, Hitachi power tools have renamed to Metabo HPT
- Cylinder valve drive system for rapid response and increased durability. Operating Pressure: 70-120psi
- Selective actuation on the trigger allows for either sequential or contact nailing. Magazine Capacity: 64
- Rafter hook is included for convenience on the jobsite
- Equipped with an industrial 2-piece magazine that can withstand job site abuse
- Accepts 2 strips of nails at a time and locking feeder system makes replenishments quick and easy
- 8. 8 pounds (or 9. 1 pounds if the rafter hook is installed) lightweight and well balanced for easy maneuverability
User questions & answers
| Question: | Where are they Made |
| Answer: | Hi there. This tool is made in Taiwan. Hope this helps! |
| Question: | How much cfm's does it take |
| Answer: | Hi there! This tool consumes .088 CFM's at 100 PSI. Hope this helps answer your question! |
| Question: | Where Can I find the serial number |
| Answer: | Se encuentra en la tapa por donde tu la pones aceite esta por la orilla |
| Question: | Are they made in the USA |
| Answer: | Hi there! This tool is made in Taiwan. Hope this helps! |
Product features
Rafter Hook
Included for convenience on the jobsite
Selective Actuation
On the trigger allows for either sequential or contact nailing
Ergonomic Non-slip Rubber Grip
On the handle helps maintain a secure hold and comfort during use
Lightweight and Well-balanced
For easy maneuverability
Hitachi NV83A5 Coil Framing Nailer with Rafter Hook, 3-1/4" (Discontinued by the Manufacturer)
Product description
How do you make the best even better? Simple, you listen to what your customers want and you make it happen. Easier to maintain…Done! Interchangeable parts with the original tool…Done! Less parts in the trigger…Done! No composite parts in the trigger…Done! Add a rafter hook…Done! The NV83A5 is not only a tool for the pro it’s also the tool that provides an answer to the pros needs. Relying on the same cylinder valve drive system as the original NV83A, the NV83A5 offers both a rapid response and some serious driving power. The side load pop-out magazine only adds convenience to an already awesome tool.
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
- Tool-less depth or drive adjustment for flush fastening in varying materials
- Selective actuation on trigger allows for either sequential or contact nailing
- Cylinder valve drive system for Rapid response and increased durability
- Side load pop-out MAGAZINE for fast and easy reloads. Piston Reciprocating Action Driving System
- Hardened claw tip resists wear & grips more for driving nails at different angles
User questions & answers
| Question: | Does it shoot 2 3/8 in X.113 nails |
| Answer: | It depends on which plan you want to make. Go to their website and look under "Jig and Fixture Components - Build-It-System" and find the one you want. I built a Bridged Crosscut Box, that required some additional parts from INCRA and some wood and screws for the fence and bridge. This needed the starter kit plus 36" T-Track Plus, a 36" and 18" board for the fence and bridge, an additional Large Build-it Panel and another Miter Slider. |
| Question: | Why is this 2lbs less than the Metabo |
| Answer: | I don't own a bench dog but I can tell you that the throw length (the push into the cutter) varies depending on the miter slot distance from the cutter. I had to make some modifications to the Kreg devise to make it work on my machine. This is a well thought out system in regards to cutting mitered frames but has very little tolerance or range in respect to all of the router table systems on the market. I needed to make at least 6 adjustments to the devise for it to work on my router table, which would probably void any warranties. I have 7 router tables, dedicated one for this devise and haven't used it in over a year. I found that coping or hand mitering the trim was faster. If I was to give this a 1 to 10 rating it would be a 3. |
| Question: | works to nail plywood on concrete |
| Answer: | The fence on the Kreg Beaded Face-Frame System is 28" long. |
| Question: | This nail gun will work with 15°nail gun |
| Answer: | If it has the same track or screw to fit your table then yes I would think so. I fitted mine to a Jessem router table |
| Question: | When you guys gonna have better hooks for the nail gun |
| Answer: | Melissa,You will need a router with a 1/2" collet. A router greater than 3hp or better is best. |
| Question: | What size hose does this take |
| Answer: | I am not sure of how your Delta saw is configured. I can't imagine a Delta saw not being in the front of the line with regard to saws that Vega would want to accommadate. I ordered the Vega system for my early 70's Craftsman 10 inch saw and ,"Yes" I was nervous since I did not take the price of the system lightly. I ordered the unit and when it arrived I was intimidated for a very brief period. Once I started the install, I became very confident that the unit would work with my saw. The Vega system is so universal that it would be difficult to not be able to install it on almost any saw. The most that may be needed on most saws may be to drill a hole or two in the saw base (table) . Once installed on my saw, I calibrated the fence and when that was done, I could use the calibrations on the Vega Fenceto make very accurate cuts. The Vega system has been one of my better investments in woodworking. Not sure I have answered your particular question but I believe in theVega system after having used it. |
| Question: | What all comes with it |
| Answer: | I don't know. The mounting hardware is very versatile so if you're willing possibly do some drilling, you can probably make it fit. I think that you must have good access under the table to get the holes drilled and bolts in. On a separate note, I'd not recommend the 50" fence because it's unnecessarily large. If I were doing it again I'd get the 42". It's amazing how much floor space the extra 8" gobbles up. It is a great fence. Sorry I couldn't be more helpful. |
| Question: | Hi I was wondering when you will have the ones with the adjuster |
| Answer: | I just bought and installed this fence on an old Craftsman table saw model 113.298030 and I had to drill 1 hole for the back rail. The 3 other bolts, 1 more on the back and 2 for the front tube fit perfectly. Overall, very easy to install. Only complaint is the need to de-burr everything before installing. Not too big of a deal though. I would recommend this fence to my friends. |
Metabo HPT Coil Framing Nailer | Pneumatic | Coil Nails - 2-Inch up to 3-1/4-Inch Round Head | Tool-less Depth Adjustment | 16 Degree Magazine | NV83A5
Metabo HPT
Product description
The NV83A5 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work. The NV83A5 is like the original NV83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power.
- LIGHTWEIGHT: Only 8.8 lbs (or 9.1 lbs if the rafter hook is installed) lightweight and well balanced for easy maneuverability
- POWER AND SPEED: Cylinder valve drive mechanism provides quick response and rapid, powerful driving
- AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
- APPLICATIONS: For wall sheathing, roof decking, subflooring, packing and crating work, and more
- SELECTIVE ACTUATION: Selectable trigger mode; choose contact or single sequential actuation mode via switch in the trigger
- FASTENERS: Accepts 16° wire coil nails from 2-IN - 3-1/4-IN
- HARDENED CLAW TIP: Resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing
User questions & answers
| Question: | Where is this made (country |
| Answer: | My local Home Depot did not carry Paslode roofing nails. I had read previous reviews stating you could use other brands of roofing nails. My nailer performed flawlessly. The coils were wound too tight to go straight into the gun, so I loosened the coil and inserted them. |
| Question: | Does this come with a “no mar” tip, if not can I buy one |
| Answer: | Where do I get the belt hook. And how in the hell can Hitachi consider themselves a premium brand and sell a ladder access tool without one? I'm livid. |
| Question: | can i shoot nails on concrete or cement blocks ? for furring strips |
| Answer: | Good morning, We offer a 60 day warranty. After your first 60 days you have a one year from date of purchase directly with Hitachi. Have a great day. |
| Question: | How long is the warranty |
| Answer: | I use it for siding facia and soffit. The nails have to be compatable with the gun. Don't have to be Hitachi brand. lots of generic brands out there |
Metabo HPT 18V Cordless Framing Nailer, Brushless Motor, 2-Inch up to 3-1/2-Inch Clipped & Offset Round Paper Strip Nails, 3.0 Ah Lithium Ion Battery (NR1890DCS)
Metabo HPT
Product description
The Metabo HPT 18V Cordless Paper Strip Framing Nailer NR1890DCS completely raises the bar for cordless framing nailers.
This cordless framing nailer is designed so you no longer need the dirty hoses, loud compressors or expensive gas cartridges. It's equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nalier, but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp up time, up to 2 nails driven per second, recoil that feels like a pneumatic nailer best of all, there is no refilling of the air tank required.
This cordless framing nailer is ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite for quick in-and-out operation with minimal hassle and professional results.
- INCLUDED: 18V Cordless Paper Strip Framing Nailer
- CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom
- FASTENERS: Accepts 30 degree clipped or offset round head nails from 2-In to 3.5-In length for jobsite versatility
- POWER: Drives 400 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery
- APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose
- DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment
- PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer
User questions & answers
| Question: | It works whit a plastic strip |
| Answer: | No. 2 completely different cameras. Yours I believe is a 20MP, the w80 is a 7MP. Also your battery is a BN1, not BG1 |
| Question: | This item made in usa |
| Answer: | Not sure, is your item a Sony, first of all, and second, look at your battery that is already in your camera and see what the # is on the actual battery. That is how I knew it would fit mine. there is a number on the battery itself and that will confirm if it will fit.. thank you - if it does fit your camera, you will not regret getting this.. I love it; and the battery life is so much stronger .... and I love that you can charge the batteries in your vehicle on the car charger!!! it is simply the best thing!!! |
| Question: | I bought this gun i charged the battery and i put in 30 degree plasic strip nails and its not shooting. Whats going on |
| Answer: | I’m not sure. The bottom of my camera where battery goes says 3.6 v so check your camera. I don’t have my original battery to check. |
| Question: | Does it sink nails in engineered lumber |
| Answer: | You can plug the charger into a wall outlet or into the power outlet in a car. However make sure that for the sony batteries you turn them over when you plug it into the charger . This means the rounded sides are down and the rear of the battery is up. Otherwise the batteries will not charge. Other than that Ihave used the batteries since January and they work well. |
Metabo HPT NR90ADS1 Framing Nailer, 2" up to 3-1/2" Paper Collated Framing Nails, .113 - .148, 30 Degree Magazine, Pneumatic
Metabo HPT
Product description
The NR90ADS1 Framing Nailer drives paper collated nails from 2" up to 3-1/2" In length and features Metabo HPT next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.
- Same tools. New name. Hitachi power tools has renamed to Metabo HPT
- APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
- LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
- SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
- TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
- FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
- NEW HEAD GUARD DESIGN: Allows for quicker disassembly during tool maintenance
User questions & answers
| Question: | Does this use the Paslode paper collates nails |
| Answer: | Yes |
| Question: | can someone link nails they purchased for use with this gun? Looking for 3" to frame basement |
| Answer: | Hi. I've used Paslode nails, with the framer. Check the nail gun to see if it requires "paper collated", or "plastic-collated" nails, Otherwise they should be ok. Disclaimer: I've only used nails up to 2.5" long. |
| Question: | The picture shown is for model nr 90ae{s1} look at the model number on the nail magazine |
| Answer: | Yes that will tell you size angel and degree you need |
| Question: | does this have an adjustable exhaust system |
| Answer: | The exhaust port pivots so you can keep it from your face. Even if you catch the exhaust, the paper collating strip doesn’t pepper you like the plastic type. |
AIR LOCKER AL83 Full Round Head Framing Nailer 3-1/4" (Compatible with Hitachi NR83A) w/out depth adjustment
Product description
Air Locker AL83 Full Head Framing Nailer shoots upto 3-1/4" long nails. This nailer is compatible with the original Hitachi NR83A framing nailer, so most nailer parts are interchangeable with Hitachi nailer. Air Locker AL83 Full Round Head Framing Nailer Features: All major parts are interchangeable with Hitachi NR83A Nailer Open nose design, for easy extraction of a jammed nail Rubber grip, for added comfort Hardened aggressive toenail push lever, resists wear for prolonged life. Air Locker AL83 Includes: Full Head Framing Nailer Oil, Hex Key, Operating manual Air Locker AL83 Framing Nailer Applications: Decking Sheating Furring Packaging Pallets Fences Siding Crating Roofing. Comes in cardboard box
- Fastener Length Capacity: 2" - 3-1/4",Magazine Loading: Top
- Fastener Diameter Range: 0.11" to 0.16",Operating Pressure: 70-110 psi
- Magazine Angle: 21 Degrees,Jam Clearing: Open Nose
- Magazine Capacity: 70 Nails,Actuation: Selective (Sequential/Bump Fire)
- Air Inlet: 3/8"
User questions & answers
| Question: | Compre una hace 6 meses,y ya no sirve,,,creo que usan mala calidad en partes,,,cual es la garantia |
| Answer: | The base is too small for legs; there are other jigs specific for making tapered legs, or you can make your own. |
Metabo HPT Coil Framing Nailer | Pneumatic, 1-3/4-Inch up to 3-1/2-Inch | Wire Collated Coil Framing Nails | Tool-less Depth Adjustment | 5-Year Warranty | NV90AG(S)
Metabo HPT
Product description
The Framing Nailer NV90AG(S) drives wire collated nails from 1-3/4" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7. 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. The convenient side-load, tilt bottom magazine allows for quick and easy fastener replenishment. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.
- FASTENERS: Accepts 16° +/- 1 wire coil nails from 1-3/4-in - 3-1/2-in
- AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
- WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
- DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
- TRIGGER: Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch
- DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
- LIGHTWEIGHT: At only 7.7 lbs, it is easy to use all day
User questions & answers
| Question: | can you get a rubber tip for it |
| Answer: | The tool is 9.95 lbs. with out the battery and 11.37 lbs with the battery. |
| Question: | What are the minimum and maximum nail diameters for this gun |
| Answer: | The F-35XP would only be compatible with paper tape collected 30-34 degree nails. |
| Question: | No trabaja con compresor de aire? Dice electrico |
| Answer: | The F-35XP drives off-set full round head and clipped head paper tape collated 30 to 34 degree angle framing nails from 2" to 3-1/2" length range. |
| Question: | Why the name change? Did Hitachi develop a bad reputation or something |
| Answer: | It can take 30° - 34° paper tape clipped heads |
Latest Reviews
View all
Dog Sling Carriers
- Updated: 12.04.2023
- Read reviews
Contour For Black Women
- Updated: 07.07.2023
- Read reviews
Extra Large Backpack For Men 60L
- Updated: 29.07.2023
- Read reviews
Sony Microwave Ovens
- Updated: 13.05.2023
- Read reviews
Light Ceilings
- Updated: 14.01.2023
- Read reviews