11 best framing nailer airs

Product description

The BOSTITCH BTF83WW 28 Degree Wire Weld Framing Nailer provides the user with power and efficiency. The low profile design allows the nailer to be used in small areas. The versatile trigger drive selector enables the user to select from single or multi-drive modes. The fastener’s depth is controlled by the tool-free depth drive adjustment. 840 In-Lbs of pressure is concentrated to powerfully send the fastener into the material. Power and versatility make this nailer an essential tool for the jobsite. Replacement to the BOSTITCH LPF21PL Nailer. 7 Year Limited Liability Warranty

• Low profile design with enhanced ergonomics and balance for comfort and control.
• Powerful enough to drive into engineered lumber.
• Industrial grade design for high volume framing and sheathing applications.
• Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook.

User questions & answers

Question:	I have nails for a bostitch nail gun but don't have the gun. which gun will shoot s16d131gal nails the box says for use in n 16,n80s,n100s andn100s
Answer:	Must be the same degree, 28 gun & nails
Question:	Is this made in usa
Answer:	The BTF83WW is manufactured in Taiwan.
Question:	The technical details list the tool weight as 3 lbs is this correct for bostitch btf83ww wire weld framing nailer
Answer:	Tool Weight: 7.9 lbs
Question:	Is this 3 1/4" or 3 1/2" max length
Answer:	3” to 3 1/4 max length

Product description

The Makita 3-1/2” framing nailer (model AN924) combines durable construction and robust performance with ease-of-use features for commercial framing applications. The AN924 is engineered for a range of applications including framing walls, floors, and roofs, construction of sub-flooring, roof and floor decking, floor and wall sheathing/Siding. It is ideal for framers, roofers and carpenters. The AN924 accepts full round-head nails, 2” - 3-1/2”, with up to . 148” (16D) shank diameter, and the 2-mode selector switch (bump, sequential) provides increased convenience. The AN924 is engineered for longer tool life and ease-of-use, with a built-in air filter to minimize dust and debris from entering. Additional features include an anti-dry mechanism that stops the tool when three nails remain in the magazine, a solid rear-loading aluminum magazine for longer service life, and rubber hand-grips to provide more comfortable handling.

• Faster nail driving speed for maximum performance
• Large capacity air chamber for increased power to drive nails up to 3-1/2" X. 148 in diameter
• Drives 21º plastic collated framing Nails from 2" To 3 1/2" In length and. 113 too. 148 in diameter
• Lightweight design at only 8. 3 lbs
• Solid top-loading aluminum MAGAZINE for longer life

User questions & answers

Question:	Why is mine making a whoopie custion sound when it fires
Answer:	Sounds like a seal or o ring is out
Question:	Does it come with rafter hook
Answer:	Yes it does come with a hook
Question:	does this Makita come with a carrying case
Answer:	No caring case Great nail gun.
Question:	New to nail guns. Are the nails proprietary to the manufacturer or can you use other brands
Answer:	you can use other brands works great

Product features

Makita AN924 21º Full Round Head 3-1/2" Framing Nailer

The 21º Full Round Head 3-1/2" Framing Nailer (model AN924) combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.

The AN924 drives 21º plastic collated framing nails from 2" to 3 1/2" in length and .113 to .148 in diameter. It has a 2-mode selector switch (bump, sequential) for increased convenience. The AN924 has a lightweight design (only 8.3 lbs.) with durability features that include a heat-treated S7 steel driver blade, a solid aluminum top-loading magazine, and a nail lock-out mechanism that protects the tool and work surface from dry-fires. Added features include tool-less depth adjustment for flush or countersink nailing, added tool hook, and an ergonomic rubberized grip.

Product description

The Freeman PFR2190 pneumatic 21 degree 3-1/2" Full Round Head framing Nailer with case is ideal for projects such as framing, subfloors, roof decking, pallet and shipping crate assembly, and fencing. This versatile air powered tool is compatible with 10-12 gauge plastic collated 21 degree full Round Head framing nails from 2" To 3-1/2", and a dual mode trigger allows the option of either bump or sequential firing. This nail gun features a 360 degree adjustable exhaust to keep air out of your face, an anti-dry-fire design to extend the life of the tool, an anodized aluminum magazine and cylinder for increased durability, and a tool-free depth adjust for various applications. The body of this framing Nailer is constructed of magnesium to reduce weight, making it easier to use for long stretches of time. The removable no mar tip prevents damage to your working surface. A blow molded carrying case is included, along with safety Goggles, air tool oil, and adjustment tools. The pneumatic 21 degree 3-1/2" Full Round Head framing Nailer with case will increase productivity For Dyers at home as well as professional contractors at the job site.

• Nailed it: This 21 degree Pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional contractors and home DIY projects.
• Versatile and powerful: the framing nailer features tool-free finger depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, wall sheathing, siding installation, subfloors, pallet building, wood box assembly, and fencing.
• The right tool for the job: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.Operating Pressure: 70 – 115 PSI
• Tough and dependable: we make an array of durable construction Tools and Accessories, including staplers and nailers For siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, BOSTITCH, Senco, Paslode, and DEWALT.

User questions & answers

Question:	The listing states nail length, not diameter. IS the rack designed for .148" nails
Answer:	No, the range of nail diameter is .113-.131.
Question:	Does the Freeman 2190 have a spike tip for better toenailing
Answer:	Yes it does have the spike tip. The rubber protector just pops off when you remove the compression clamp.. I've used this gun for 5 months or so and am really happy with its performance so far..
Question:	Does nailer alone really weigh 14.5 lbs
Answer:	Hi Craig . . . the nailer weighs less than 10 lbs, the 14.5 must be the gross weight of the nailer within its' somewhat rugged plastic case. . . I can't say enough about the nailer, it's my 2nd Freeman product. . . they offer a great value!
Question:	will this work with a 6 gal pancake compressor with a cfm of 2.6, used lightly to build a shed
Answer:	The air compressor must be able to maintain a minimum of 70 psi during operation, with an operating range of 70-115 psi, not to exceed 120 psi.

Product features

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

Paslode Pneumatic Compact Framing Nailer is designed specifically with remodelers in mind. Get the access and maneuverability you need in tight spaces with this lightweight, yet powerful, pneumatic nailing system. When used with Paslode nails, this nailer experiences fewer jams and misfires which means less downtime. The Paslode Compact Framing Nailer System makes remodeling easier.

• Lightweight - Lightest framing nailer ever - only 5.9 lbs- for less fatigue and more control when working overhead and in tight spaces.
• Great Maneuverability - Fits easily into the tightest spaces such as between 16" o.c. studs.
• Increased Productivity - By-pass follower provides quick 2-step re-loading.
• Remodeler'S Fit - Great for sheathing, blocking, and moving interior walls.
• Precise - Fewer Jams And Misfires When Used With 30° Paslode Framing Nails: 2" to 3-1/4" in length, .113" to .131" shank diameter.

User questions & answers

Question:	can you get a plastic or rubber tip on it if you use it on cedar decking
Answer:	Product shown is a full size framing nailer.with no info to the contrary would recommend a2 tank 3/4 + hp compressor.Hatachi and senco have worked well for us.
Question:	Does the Paslode F325R include a carrying case
Answer:	Yes it does shoot both
Question:	Need nailer by 10/17 can it be shipped faster
Answer:	Yes
Question:	What size nails does the paslode 325 use
Answer:	Well I have one of those machines haven't really used been able to use it for what I intended yet depending on where the O-ring is you should be able to go someplace like Harbor Freight or Ace Hardware and get an o-ring kit and put it in better yet you should be able to go to a Milwaukee dealer that repairs Milwaukee tools and I'll probably take care of it for you for free don't go to Amazon go to Milwaukee Tools

Product description

Paslode PowerMaster Plus framing nailer system will allow you to have the job done in no time. Heavy-duty jobs require a heavy-duty nailer with a powerful performance in a lightweight design. That's why the pros turn to the proven performance, durability and driving power only a Paslode pneumatic framing nailer can provide. This low-recoil nailer offers a center of gravity close to the trigger for great balance and less arm fatigue. When used with Paslode framing nails, this nailing system's heavy-duty power can frame walls faster, helping get jobs done on time, every time.

The Paslode F-350S PowerMaster Plus 30-Degree Framing Nailer is a reliable workhorse that no jobsite should be without. Offering an unmatched combination of power, comfort, and durability, this heavy-duty pneumatic nailer is the perfect tool for framers, general contractors, custom homebuilders, and remodelers. Delivering more than 10% more power-per-pound than the competition, the PowerMaster Plus easily drives nails through engineered lumber, so it will make short work of everything from framing and sheathing to fence and deck construction.

The F-350S PowerMaster Plus 30-Degree Framing Nailer At a Glance: Drives 2" to 3-1/2" 30-degree nails into tough lumber Compact size fits between 16" studs, joists, and rafters On-tool depth of drive adjustment Balanced for premium performance 1-year limited warranty on housing and cap parts

Center of gravity is close to the trigger for optimal balance.

Compact size easily fits between 16" joists, rafters, and on-center studs.

Professional-Grade Tool Simplifies Framing Jobs

Ideal for professional framing work, the PowerMaster Plus drives 2" to 3-1/2" 30-degree clipped and full-head papertape nails with .113" - .131" diameters in engineered lumber, so you can handle decking, sub-assembly blocking, sheathing, and trussing of all types. And when you're tackling a big job, you'll be grateful for the PowerMaster Plus's high-capacity one-piece aluminum magazine, which holds up to 84 nails (two strips).

Sequential Operation for Greater Efficiency

With the PowerMaster Plus you can choose either manual or sequential operation and drive up to 12 nails per second--the barrel-shaped nose will ensure an easy line of sight when nailing. To keep things simple, a durable work contact element adjusts on the tool--not the compressor--for precise depth of drive, so you'll be sure to get the right depth for the job. To top it off, the contact element is specially designed to securely grip wood during toenailing.

Big Power in a Compact Package

Weighing just 8.4 pounds and operating at 80-120 psi (5.5-8.3 bar), the PowerMaster Plus delivers over 10% more power per pound than the competition. Offering all the muscle you need to drive through engineered lumber. This tool is surprisingly easy to handle.

To save you time and energy, the PowerMaster Plus features an ergonomic design that places the center of gravity close to the trigger, providing optimal balance and the lowest recoil of a tool of its size. And with a soft-grip handle, it's comfortable to hold, even during all-day jobs.

Incredibly compact, the PowerMaster Plus has a height of just 13.3", so it will easily fit between 16" joists, rafters, and on-center studs. A rafter hook--which is located on the magazine and can be moved out of the way when it's not needed--makes it easy to hang the PowerMaster Plus on your tool belt, ladder, or rafter.

For further ease of use, this pneumatic nailer features an adjustable air-deflector cap and a main valve that improves airflow and performance over a wide range of operating conditions. A bolt-on-end plug makes for quick service and secure compressor attachments.

The PowerMaster Plus is backed by a 90-day limited warranty on wear parts, a six-month limited warranty on magazine parts, and a one-year limited warranty on housing and cap parts.

About Paslode: Providing Professionals with Innovative Solutions

With more than 70 years of experience, Paslode provides the standard by which other pneumatic and cordless fastening systems are measured. With its goal to provide professional users with high-quality fasteners and fastening tools, Paslode has achieved many industry firsts and innovations, including powerful tools that drive through the toughest woods--even LVL--and fuel-cell batteries that save time and energy.

What's in the Box

Nailer; bump fire trigger; reducing bushing; hex wrench (on tool); safety glasses; and owner' s manual.

From the Manufacturer

Paslode F-350S PowerMaster Plus™ Framing Nailer #501000 drives both Clipped Head nails (2" - 3 1/2") and RounDrive nails (2" - 3 1/4"). The Paslode PowerMaster Plus™ tool offers all the power needed to drive into engineered lumber, yet is still comfortable to use. Features of the Paslode PowerMaster Plus™ include the Overmolded Grip, for increased durability and user comfort, the Rafter Hook, making it easy to hang the nailer on a tool belt or on a wood structure and a Ruler on the magazine, allowing for quick measurements without using a tape. The Paslode PowerMaster Plus™ offers an Adjustable Work Contacting Element, a Depth of Drive adjustment on the tool rather than at the compressor saving time and energy. The rugged design of the Paslode PowerMaster Plus™ has stood up to job site and lab testing in heat, humidity and freezing temperatures while the ergonomic design places the center of gravity closer to the trigger, providing better balance and offers the lowest recoil for a tool of its size. Use the Paslode PowerMaster Plus™ tool for: Framing, Wall Sheathing, Roof Sheathing, Floor Decking, Blocking Sub-Assemblies.

• Great Maneuvering - Low-recoil offers a center of gravity close to the trigger for great balance and less arm fatigue.
• Powerful Performance - Heavy duty power helps frame walls faster - drives nails into the hardest woods, even LVL. Works with fewer jams or misfires.
• Compact - Its size fits between 16" o.c. studs, joists, and rafters.
• Convenient Design - Soft grip handle provides comfort and rafter hook moves out of the way when not in need.
• Versatile Application - The Paslode F350S framing nailer is great for framing, wall sheathing, roof sheathing, floor decking and more.

User questions & answers

Question:	I understand this does not come with any air fittings, so what are people using? 1/4" fittings with 3/8" hoses or 3/8" fittings with 1/2" hoses
Answer:	This comes with s reducer bushing which I used and am using 1/4" fitting and 1/4" hose without any issues.
Question:	Is any of the paslode make for plastic collated nails
Answer:	No. All paper.
Question:	Nail gun misfires why
Answer:	When you load nails into the magazine, don't let the magazine slide ram into the nails. It seems a lot of people think it is ok to release the slide at the bottom without guiding it with there hand. The speed and momentum of the slide, unattended will crush the paper back between the nails and cause misalignment when it reaches the firing mechanism. Which results in many misfires. Straight nail magazines will misfire much less.
Question:	Can this be used for baseboards or doing cabinets
Answer:	The smallest nail is 2" x .113 -- definitely not for cabinets or any finish work.....

• Framing Air Nailer Fastener length 2-3/16 to 3-9/16 in. Nail Capacity 60-100 Nails.
• Parcel comes with 1 framing nailer, 3 set of nailer 21 degree, 28 degree, 34 degree.
• Working Pressure 70-120 PSI, depending on nail size and wood density.
• Application of frame air nail gun: Framing, wall sheathing, roof sheathing, floor decking.
• Warranty: the item is free from defects in materials and workmanship 90 days since purchase, and 1 year limited warranty.

Product description

The NV75A5 3" Siding/Light Framing Coil Nailer bridges the gap between framing and siding on the jobsite. It has the power to frame and the precision and convenient features needed for siding work. The capability to drive up to 3" x 0. 131" fasteners, and adjustable depth of drive make it the perfect tool for sheathing applications. Its light weight (5. 7 lbs), flexibility to accept wire and plastic collated nails, no mar nose cap, and selective actuation give it the convenience needed for siding applications. Additional features like the side-load tilt bottom magazine, 360º adjustable air deflector, aluminum rafter hook, and plastic shield make the NV75A5 the tool of choice for any framing and siding crews!

• FASTENERS: Accepts 16º wire coil nails from 1-3/4" - 3" and 15º plastic coil nails from 1-3/4" - 2-1/4"
• LIGHTWEIGHT: Only 5.7 lbs for easy maneuverability
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• NO MAR NOSE CAP: Protects material from accidental marks
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

User questions & answers

Question:	Has anyone used 2-1/2 inch 15 degree plastic coil nails for the nv75a5 gun
Answer:	15 gauge 15 degree wire collated coil nails from 1" to 2-1/4" in length
Question:	does it require oil
Answer:	Made in Japan
Question:	Does this take 3 1/2 nail
Answer:	It’s fast. Faster than Dewalt
Question:	What is the difference between the nv75a5 and nv75an
Answer:	I think it’s about one second I have never had to wait for it by the time I line up the next shot.

Product features

See Thru, Side Load, Tilt Bottom Magazine

For easy re-loads and easy remaining fasteners visibility.

Selective Actuation Switch

Allows for quick transitions between sequential and contact nailing with the simple flip of a switch.

Drives Wire and Plastic Sheet Collated Nails

For added flexibility.

Aluminum Rafter Hook

For added flexibility.

Product description

Air Locker AL83 Full Head Framing Nailer shoots upto 3-1/4" long nails. This nailer is compatible with the original Hitachi NR83A framing nailer, so most nailer parts are interchangeable with Hitachi nailer. Air Locker AL83 Full Round Head Framing Nailer Features: All major parts are interchangeable with Hitachi NR83A Nailer Open nose design, for easy extraction of a jammed nail Rubber grip, for added comfort Hardened aggressive toenail push lever, resists wear for prolonged life. Air Locker AL83 Includes: Full Head Framing Nailer Oil, Hex Key, Operating manual Air Locker AL83 Framing Nailer Applications: Decking Sheating Furring Packaging Pallets Fences Siding Crating Roofing. Comes in cardboard box

• Fastener Length Capacity: 2" - 3-1/4",Magazine Loading: Top
• Fastener Diameter Range: 0.11" to 0.16",Operating Pressure: 70-110 psi
• Magazine Angle: 21 Degrees,Jam Clearing: Open Nose
• Magazine Capacity: 70 Nails,Actuation: Selective (Sequential/Bump Fire)
• Air Inlet: 3/8"

User questions & answers

Question:	Compre una hace 6 meses,y ya no sirve,,,creo que usan mala calidad en partes,,,cual es la garantia
Answer:	The base is too small for legs; there are other jigs specific for making tapered legs, or you can make your own.

• Fastener Type: Full Round Head, Plastic Strip Collation | Air Inlet: 3/8 inch
• Fastener Length Capacity: 2 inch to 3-1/2 inch | Fastener Diameter Range: 0.113 inch to 0.148 inch
• Magazine Angle: 21 Degrees | Magazine Capacity: 70 | Magazine Loading: Top
• Operating Pressure: 70-110 PSI | Jam Clearing: Open Nose | Actuation: Selective, Sequential/Bump Fire
• Tool Dimensions: (L x W x H) 21-13/16 inch x 4-1/4 inch x 13-3/8 inch

User questions & answers

Question:	Does this have a depth adjustment
Answer:	I bought 2 and use them both on windows.They lie along the sill at the bottom of the window.I have wide windows so I bend them up a bit at each side(they stay in place as they are rather like a bean bag).I am very satisfied with them.

Product description

The CFRN9021 is one of the most versatile framing nailers in the industry. The CFRN9021 can be used in framing, Sheathing, Siding, Trusses, bridging, engineered lumber, strapping, fencing, exterior decks, And sub-flooring.

• Durable and lightweight Heat treated aluminum housing to last years of continuous use.
• Tool free depth adjustment makes it easy to ensure fasteners are driven perfectly every time.
• Comfortable non-slip rubber grip helps reduce hand fatigue for prolonged use.
• Contact and sequential firing modes give you the option to easily select the correct mode needed for your project.
• All Carpenter Air Tools products have a 7 year limited warranty so you can buy in confidence that you are receiving a quality product

User questions & answers

Question:	Que medida de clavos usa
Answer:	No, this is designed for cutting 5/16" (8mm) Fiber Cement Siding.
Question:	Does this gun shoot ring shanked nails
Answer:	2.6 might be a little light...mine is a 3.8 at 90 psi and it had to run almost every time I cut a board with it. It is a fantastic tool though...highly impressed with it's ability to sheer hardy board...
Question:	I live in germany is the warranty valid abroad
Answer:	Photo super misleading. I was so excited to get 4 malco extensions but just got the 12in Still need to get my 3in now
Question:	What is the warranty consist of
Answer:	From the information i have here, yes it should work with basically any drill that you have. One of our photos show a Dewalt 20V drill being used in conjunction with the turbo shear.

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.