12 best bostitch f28ww framing nailers

Product description

Air Framing Nailer, Angled, Offset Round Head Style, Collation Angle 28 Degrees , Collation Type Wire, Fastener Range 2 In. to 3-1/2 In., Shank Dia. 0.113 In. to 0.131 In., CFM per Shot 0.075, Required Pressure 70 to100 psi, Max. Pressure 120 psi, Magazine Capacity 100, Sequential Firing Mode, Adjustable Exhaust, No-Mar Tip, Housing Material Magnesium, Yellow Color, Air Inlet 1/4 In. Male, Length 20 In., Width 5-1/8 In., Height 14-1/4 In., Tool Weight 7.70 lb.

Framing, siding, decking, attaching wood to masonry, you name it, this versatile and lightweight framing nailer from Bostitch does it all. This nail gun is equipped with a patented pushbutton adjustable depth guide that sets the nail to desired depths quickly and conveniently. A depth-of-drive control of course means there’s no adjusting compressor pressure, but also that you don’t have to fumble for tools when you’re standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.

Weighing just 7.6 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is a big plus when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production. The trigger works as either a sequential or bump fire trigger. A notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, a lightweight magnesium housing means easy handling and unsurpassed durability

.

The unit drives 2- to 3-1/2-inch wire-collated framing nails. One of the most powerful framers on the market, this nailer features 1,050 inch-pounds of driving power for tackling even toughest engineered lumber applications. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for durability and years of use.

--Brian D. Olson

From the Manufacturer

This new framing nailer drives 2- to 3 1/2-inch (.113 to.131-inch) framing nails. This lightweight tool is also one of the most powerful framers with 1050-inch-pounds of driving power. It is able to tackle even tough engineered lumber applications. The tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches on center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• The product is Stick Framing Nailer
• Easy to use
• The product is manufactured in United States
• 28 degree Wire Collated Stick Framing Nails. Thread Fitting Type 1/4 inch NPT. Magazine Capacity 100 Nails
• Compatible with 28 degree wire collated framing nails, offset round and clipped head
• 2 to 3 1/2 inch framing nailer
• Driving power: 1050 inch pounds; pushbutton depth of drive

User questions & answers

Question:	Is this a 28° nail gun
Answer:	Yes, F28WW is a 28° Framing Nail Gun.
Question:	will this gun shoot paslode 3" tapered , paper connected nails
Answer:	I'm not sure. The gun calls for 28 degree nails and they aren't the easiest thing to find. I understand people have used other nails but I don't know which ones. I don't know how often they jamb or about the long term effect on the tool.
Question:	I have B12D nails.. will they fit this gun
Answer:	I do not know what a B12D nail is for: Stanley Bostitch S12D131-FH 3-1/4x.131 Nail, 2000-Pack; are the correct 12 d nail, they have to have the 28 degree slant to the nail stack.
Question:	Why is this nailer listed as a Bostitch F28WW clipped head 2-inch to 3-1/2-inch framing nailer but the picture shows a Bostitch F33PT
Answer:	unfortunately, many times the pictures on Amazon do not match the model number of the product. They actually warn you against this. We did not upload this picture, so we cannot change it, sorry.

Product features

BOSTITCH Framing Nailer, Clipped Head, 2-Inch to 3-1/2-Inch (F28WW)

This 28-degree wire weld framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. Depend on this 28-degree wire weld framing nailer for efficiency.

• Framing
• Sheathing
• Siding
• Trusses
• Bridging
• Wood to masonry
• Engineered lumber
• Fencing
• Exterior decks

Features

• Patented push button adjustable depth guide sets nail to desired depths quickly and conveniently
• Notched 16" layout indicator on magazine helps achieve correct distance between studs in a matter of seconds
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

2750-5494 Features: -Stick nails.-Use in Nail Guns N16, N80SB, N86S, N70S, N70SB, and N100S.-Clipped head.-Plain shank.-Diamond point.-Galvanized.-6d.-2''.-2,000 per box.

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 2" x .113" 28 Degree Wire Collated Framing Nail
• ThickcoatTM galvanized finish delivers consistent, corrosion-resistant performance in pressure treated lumber and exterior applications.
• Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
• 2,000 per Box
• Works in: F28WW, N88WWB, N79WW, N80SB

Product description

3-1/4" x 120 Smooth Shank, Galvanized, 28 Degree, Wire, Weld Full Head Stick Nail. Thick coat galvanization provides consistent high performance. Corrosion resistant coating designed to meet or exceed the performance of ASTM A153. Specifically designed for use in all pressure treated lumber, and exterior applications. Fits Bostitch Model #F28WW, True Value #632556, and other Bostitch Models N80SB, and N88WW.

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• 3-1/4" x 120 Smooth Shank, Galvanized, 28 Degree, Wire, Weld Full Head Stick Nail
• Thick coat galvanization provides consistent high performance
• Corrosion resistant coating designed to meet or exceed the performance of ASTM A153
• Specifically designed for use in all pressure treated lumber, and exterior applications
• Fits Bostitch Model #F28WW, True Value #632556, and other Bostitch Models N80SB, and N88WW

Product description

3-1/2" x 131 Smooth Shank, Galvanized, 28 Degree Wire Weld Full Head Stick Nail. Thick coat galvanization provides consistent high performance. Corrosion resistant coating designed to meet or exceed the performance of ASTM A153. Hot dipped, galvanized specifically designed for use in all pressure treated lumber, and exterior applications. Fits Bostitch model #F28WW, True Value #632556, and other Bostitch models N80SB, N88WW. Comes with 2,000 per pack.

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• 3-1/2" x 131 Smooth Shank, Galvanized, 28 Degree Wire Weld Full Head Stick Nail
• Thick coat galvanization provides consistent high performance
• Corrosion resistant coating designed to meet or exceed the performance of ASTM A153
• Comes with 2,000 per pack
• Fits Bostitch model #F28WW, True Value #632556, and other Bostitch models N80SB, N88WW

Product description

The BOSTITCH BTF83WW 28 Degree Wire Weld Framing Nailer provides the user with power and efficiency. The low profile design allows the nailer to be used in small areas. The versatile trigger drive selector enables the user to select from single or multi-drive modes. The fastener’s depth is controlled by the tool-free depth drive adjustment. 840 In-Lbs of pressure is concentrated to powerfully send the fastener into the material. Power and versatility make this nailer an essential tool for the jobsite. Replacement to the BOSTITCH LPF21PL Nailer. 7 Year Limited Liability Warranty

• Low profile design with enhanced ergonomics and balance for comfort and control.
• Powerful enough to drive into engineered lumber.
• Industrial grade design for high volume framing and sheathing applications.
• Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook.

User questions & answers

Question:	I have nails for a bostitch nail gun but don't have the gun. which gun will shoot s16d131gal nails the box says for use in n 16,n80s,n100s andn100s
Answer:	Must be the same degree, 28 gun & nails
Question:	Is this made in usa
Answer:	The BTF83WW is manufactured in Taiwan.
Question:	The technical details list the tool weight as 3 lbs is this correct for bostitch btf83ww wire weld framing nailer
Answer:	Tool Weight: 7.9 lbs
Question:	Is this 3 1/4" or 3 1/2" max length
Answer:	3” to 3 1/4 max length

Product description

The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Magazine Loading - Bottom Load

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand

The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio

The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Framing nailer and two quick-change nosepieces.

From the Manufacturer

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications

User questions & answers

Question:	Is it true that the hammer is only "positive placement" for nails up to 2.5" long
Answer:	Yes, pp tip for nails up to 2.5" in length. Framing tip for up to 3.5"
Question:	How is it powered? Is it pneumatic or battery operated and/or use compressed gas cylinders
Answer:	It is pneumatic. I've been using a 6 gal Campbell Hausfeld compressor with 1/4" quick disconnects at about 90 - 100 psi for metal connectors and 16d nails and have never run out of air. I bought it mainly for the metal connector ability, which it does great, but is also great for down to 6d nails. Just turn down the pressure on the smaller nails.
Question:	Is it difficult to find nails for this hammer
Answer:	Metal connector nails need to be larger around to fit properly in the holes and have the shear strength. If the nail is longer than 2-1/2 inches the gun will not fire by design. I can only find the 1-1/2 21 degree nails on Amazon and Home Depot online. They are expensive, but surprisingly, I tried some 33 degree 1-1/2 inch nails in this gun and it fires normal. I don't see any wear as a result either. I would not try this with longer 33 degree nails because they would angle out of reach of the driver. The gun out performs my old Senco SN60 by a large margin, is lighter, but about an inch taller.
Question:	What is the difference between a round head and a clipped head nailer
Answer:	The round head is the traditional type nail you would find in a box or bin of nails. The clipped head is the round head clipped off to the width of the nail shank on two sides--does not had the holding power of the round head.

Product features

BOSTITCH F21PL

This 21-degree Plastic Collated Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button.

Features:

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
• Patented push button adjustable depth guide sets nails to desired depths
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

Includes: - Utility Hook Assy 171354 Genuine OEM Replacement Part New, OEM Bulk Packed Please Refer to List Below for Compatibility. Includes: - Utility Hook Assy 171354 Genuine OEM Replacement Part New, OEM Bulk Packed Please Refer to List Below for Compatibility

• 171354 Bostitch Utility Hook Assy
• Models: F21PL, F21PL2, F28WW, F33PT, N89RH17, N89C, N89RH17-2MCN, N89C-HQ

User questions & answers

Question:	I have a bostitch n95rhn nail gun, will this handle fit it
Answer:	We do not recommend this product for use inside of a sauna. If you plan to treat the wood on the exterior it would be great for protecting the exterior sides of the sauna.
Question:	Does the spring come with the hook
Answer:	If it was an oil based stain that has aged it will work. If it is freshly stained or a solid stain then the previous stain needs to be removed. Yes a small area to ensure the product is absorbed into the wood prior to doing the whole deck. Any questions during your project please feel free to call us at 267-614-5284.

Product description

BOSTITCH Framing Nails, 28 Degree, Wire Weld, 2-Inch x 113-Inch, 2000-Pack (S6D-FH)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Country of Origin:China
• Package length:18.0"
• Package width:18.0"
• Package height:21.0"

User questions & answers

Question:	wire nail
Answer:	Mine were purchased a few years ago and were the black oxide which is NOT galvanized. As far as I know you ONLY want galvanized for treated wood.

Product description

BOSTITCH S8D-FH 28 Degree 2-3/8-inch by . 120-Inch wire weld framing nails (2, 000 per box)

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 2-3/8" X . 120" 28 Degree wire Collated framing nail
• Coated finish eases penetration resistance and increases holding power.
• Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
• 2, 000 per box
• Works in: F28WW, N88WWB, N79WW, N80SB

User questions & answers

Question:	are these galvanized
Answer:	Yes, the BOSTITICH SBD-FH 28 DEGREE 2-3/8" will work for this application.
Question:	Are these nails good for fastening osb to 2x
Answer:	Check the owners manual or check on line they worked fine in My Bostich 20Volt cordless framing nailer I am not near it right now see the model number
Question:	how do i best find if these will work with a Bostitch N80 framing nailer
Answer:	Yep they are the same.
Question:	As far as I could tell clipped nails is same as half round nails, is this correct? 28 deg seems to be standard for clipped nails for older nail guns
Answer:	Yes they will. The 28 degree in the description refers to the angle of the nail. So 28 degree nails will fit any 28 degree nailer.

Product description

Compatible with various Bostitch Nailers including: F21PL Pneumatic Stick Nailer F21PL2 Pneumatic Stick Nailer F28WW Pneumatic Stick Nailer F33PT Pneumatic Stick Nailer N89RH17 Pneumatic Stick Nailer N89C Coil-Fed Pneumatic Framing Nailer N89RH17-2MCN Pneumatic Stick Nailer N89C (140020000) Framing Nailer N89C-HQ (Type 0) Framing Nailer N89C-HQ (140020000) Framing Nailer Please Note: May not fit all specs of above models listed, please consult owner's manual for proper part number identification and proper installation

• Pack of 2
• Genuine OEM Bostitch Parts
• This utility hooks allows user to hand tool for easy and safe access. This is only one plastic half of a hook clam shell assembly.
• Please note the mount, spring, pin and the other half of the hook are all sold separately.
• Compatible with various Bostitch Nailers

User questions & answers

Question:	Do these come with the pin and spring for mounting
Answer:	Seal It Green Xtreme is plant based and non toxic. I have used it for a couple of years now on my raised bed garden.

Product description

BOSTITCH Stanley S10D-FH 3" Smooth shank 28 wire Collated stick Framing nails

From the Manufacturer

Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.

• Full Roundhead 3" X . 120" 28 Degree wire Collated framing nail
• Coated finish eases penetration resistance and increases holding power.
• Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
• 2, 000 per box
• Works in: F28WW, N88WWB, N79WW, N80SB

User questions & answers

Question:	Will these nails work in a numax framing nailer
Answer:	Yes!
Question:	Can I buy it here
Answer:	Yes, as long as the specifications listed for your nailer match the specifications noted for the nails.
Question:	will these nails work in a old N19 model nailer
Answer:	I think .120 is closer to 11 gauge?
Question:	Are they 10 gauge
Answer:	Tap-con is the supply houses name for these screws. For example....They are used by tradesmen in mounting electrical/plumbing/and misc. in masonry, cement concrete, stone, brick, and etc. You need a hammer drill to make a proper size hole at the right depth and a drill/driver to install screw. Professionals used a tapcon drill/socket in a Bosch bulldog hammer drill. They bore a hole and then use the socket feature to drive in a screw. It is a very fast way.... that cuts labor time from minutes to seconds.You can put in screwed tapcons... to mount a conduit run for an electrical system in minutes....using fancy tools and these screws

Product description

The product is Coil Frame Nailer. Easy to use. The product is manufactured in Taiwan.

A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch's utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn't the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls--the inevitable beating nailers take on a job site. The nailer's aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels--it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not have adjustable drive depth. --Jonathon Tudor

• The product is Coil Frame Nailer
• Easy to use
• The product is manufactured in Taiwan
• Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing
• Contact-trip trigger; large-capacity magazine
• Aluminum housing
• Accomodates nails from 1-1/2 to 3-1/4 inches
• Weighs just 8 pounds; 7-year warranty; made in the Taiwan

User questions & answers

Question:	can someone explain why the canister adjusts up to 4" nails but, it can only handle up to 3 1/4" nails
Answer:	With a noise reduction rating of 21, as compared to the 22 of the popular Peltor TAC 100 model, the RangeGuard offers solid, consistent hearing protection. If you're shooting indoors, using an extremely high caliber weapon, or are surrounded by a significant amount of gunfire, your hearing may be compromised. Outdoor protection is excellent, and under most circumstances you are assured of being fully protected. After over 100 hours of use with the RangeGuard (both indoors and outdoors with a wide variety of firearms), I never experienced any kind of noteworthy shortcomings in the noise reduction of the model. As stated, under some circumstances you may feel the audio coming in a bit louder than you'd like, but the average gun owner will never need a stronger model.
Question:	Can I use it for solid hardwood flooring
Answer:	Yes, very easily. They even amplify sounds and make them easier to hear (but not loud noises like gunshots). They have a microphone on each earpiece so you can easily distinguish where sounds are coming from.
Question:	Is this a good framing nailer
Answer:	They'll only "work" if you turn them off. As someone who actually owns these headphones, no - they will not work for lawn mowers. Unless, of course, you turn them off, in which case you're paying a premium for muffs with a microphone and speakers in them. The headphones pick up all outside noise using two forward-facing microphones so that you can "hear" while you're wearing them. The cutoff circuit only engages when it picks up a sudden, sharp noise - like a gunshot, an air nailer, or a hammer blow. Continuous loud noises such as heavy equipment, power tools, saws, airplanes, etc... do not trigger the cutoff and in many instances can *amplify* the noise.
Question:	Will this fit 1 1/2" or 1 3/4" roofing nails
Answer:	These are teal the others are camo green. That's about it.