14 best power finish nailers

Product description

This product features a 20-Degree finish nailer, bump operating mode, and integrated LED lights as well. It is convenient and works effectively. It is definitely a great quality product.

• Integrated LED lights
• Bump operating mode
• 20-degree finish nailer
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Is it brushless
Answer:	I believe that it is brushless. I have 2 of the nail guns and they are great. Works fast and sets the nails ever time. Battery lasts a long time as well.
Question:	Just got the nail gun. somehow it jammed as soon as placed brads in it. it seems to flip the brad. how is that possible? not happy i'm wasting brads
Answer:	Ummm, yes, this is a finish nailer, big difference from a brad nailer. Make sure you are using 16 gauge 20 degree nails, not 15 gauge, and definitely not 18 gauge brads. This is a great nailer, but I'm not tossing out my Bostitch air nailers to replace it! This is a great supplement to the air nailers for small jobs that only last a day or so.
Question:	Have they sorted out the Low nail depth issue yet? After some use my contractors say it wont Drive 2-1/2 nails
Answer:	This is my second Dewalt finish nailer and I have never had any issues with it not driving 2 1/2" nails. That being said, if you are driving several 2 1/2 nails then you need to make sure you are working with a fully charged battery. I have noticed that if the battery gets to a 1/3 charge it will not drive 2 1/2" nails as deep. It also depends on the type of wood (hard or soft).
Question:	Can this be used for blind nailing tounge and groove paneling
Answer:	Yes but don't waste your money if you plan on using this gun a lot. I've had mine in the shop 3 times in the year I've owned it. Buy the 18 volt version is more powerful and breaks way less. I've used mine for the last 6 years at least. This new gun will not even drive 2 1/2" nails consistently through soft wood let alone any hard wood.

Product description

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Diagnostics with LED indicator Communicates battery charge status: charged
• Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
• Automatic shut-off protects excessive discharge of vehicle's battery
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Can I use this for trim
Answer:	I plan to use mine for trim shortly (shorter nail). Used longer nail for 3/4" pine tongue and groove wall. Love the product.
Question:	How many finish nails does one battery fire? I know the battery size will influence the number significantly but is it closer to 150 or
Answer:	I use mine all day and on a fresh battery it will go the distance. I have never felt like the batteries were an issue vs amount of nails shoot
Question:	Will this gun shoot staples also
Answer:	no 1 1/4'' to 2 1/2 15ga finish nails only.
Question:	Does this include the battery, charger and bag
Answer:	Yes, It includes both

Product description

This pre-owned or refurbished product has been professionally inspected and tested to work and look like new. How a product becomes part of Amazon Renewed, your destination for pre-owned, refurbished products: A customer buys a new product and returns it or trades it in for a newer or different model. That product is inspected and tested to work and look like new by Amazon-qualified suppliers. Then, the product is sold as an Amazon Renewed product on Amazon. If not satisfied with the purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee.

• This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com

User questions & answers

Question:	Will this kit work on the DA250B finish nailer
Answer:	I comes with a installed battery. You don't change the battery, you recharge it.
Question:	I got fram nail gun round head over 20 years lick air from top i want fix my self change all seal for stopping air comeout where i can buy parts c
Answer:	The light does not swivel but is small enough that all you need to do to redirect the light is to turn it. The light pivots 90+ degrees and can be positioned wherever you need it. This light is the bomb and can go pretty much anywhere. I use it all the time whether construction or working on vehicles.
Question:	I have a Porter Cable FN 250B. Do you have the seal kit for this model. I live in Australia but I have a forwarding contact in the States
Answer:	Not replaceable. Great light though. Happy with my purchase.

Product description

This 3PLUS Angle Finish Nailer drives 15 gauge 1-1/4” to 2-1/2” strip angle finish nails. It targets for many different finish work applications, can be used for the installation of crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. With 34-degree magazine angle, it allows the user to reach into corners or tight spaces with ease. Its durability, precision nail placement and reliable nail driving power would help you complete job efficiently.

• Uses: 1-1/4" to 2-1/2" 15-gauge "DA" style angled finish nails
• Tool-free depth adjustment for flush fastening into varying material for improved control and a professional finish
• Work Contact Element prevents accidental firing. A no-mar tip protects work surface from any unwanted damage
• 360° fully adjustable exhaust portal directs air exhaust away from the user or work piece. Quick clear jam release functions for easy maintenance
• Interchangeable trigger for single shot or bumper fire function

User questions & answers

Question:	Anyone know the website of the manufacturer of this website that could provide me a user guide/manual for this item? There was not one in the box
Answer:	You can’t adjust the pressure but you can adjust how far the nail goes into the wood. It is a dial that you turn to adjust that.
Question:	Description states it uses two sizes, 1 1/4-2 1/2 and 1 1/4-3 1/2. Which is correct
Answer:	Yes black battery works
Question:	No instructions for oiling. I own 4 different nail guns, they use 1 to 5 drops of oil depending on gun. The manual gives no instructions
Answer:	No, it is recommended to only use Finish Nails in the PCC792B.
Question:	What PSI does this need to operate
Answer:	Also - be careful to keep the 18 Ga nails clearly marked and separate from the 16. I have mistakenly loaded 18s in, and its quite a job to get them out of the tool afterwards.

Product description

The NT65MA4 15-Gauge Angled Finish Nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The NT65MA4 nailer has a compact body and angled magazine making for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

• 15 Gauge Finish Nailer
• Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required
• Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
• 360-degree fully adjustable exhaust portal directs air exhaust away from the user or work piece
• At only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability

User questions & answers

Question:	will bostich FN type nails work in this gun
Answer:	No, you must use DA-type nails. The good news is that 95% of nail brands are DA-type: Hitachi, Senco, Nail Pro, Fastener USA, and so on.
Question:	Is this similar to Makita nailer and does use other brands of nails
Answer:	Good morning, This tool accepts the following. It doesn't have to be Hitachi nails. Have a wonderful day. It accepts 15-gauge nails from 1-1/4" long to 2-1/2" long.
Question:	Can I purchase a nose cap for this nailer.. mine didn’t come with one
Answer:	Look carefully at your gun. The nose cap is mounted, for transport, on the bottom end of the magazine. It's black, and easy to miss. I returned my first gun, thinking that it was missing the nose cap, as well.....
Question:	Nails for this item
Answer:	Use only DA-type nails (i.e., NOT Bostitch FN-style).

Product features

Selective Actuation Switch

Allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required

Tool-less, Easy to Clear Nose

For quick nail extraction should a nail jam during use

360-degree Fully Adjustable Exhaust Portal

Directs air exhaust away from the user or work piece

Factory Installed Air Fitting

Angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

When you need precision in tight spaces, reach for the lightweight Paslode 16 Ga Angled Cordless Li-ion Finish Nailing System. A versatile nailer designed for trim applications, this cordless nailer gives you great maneuverability to place the nail exactly where you want it, wherever you're working: overhead, on ladders, or on your knees. The Finish Nailer fits in tight spaces so nailing crown molding or baseboard in the corners becomes a breeze. Our cordless nailer, finish nails, and fuel cell is designed to work together so you can experience non-stop accuracy

• Precise Nail Placement - Angled magazine reaches tight spots and allows precise nail placement, crown molding or baseboard in the corners.
• No Downtime - 7V Li-ion battery and up to 12,000 nails per charge lessens downtime and provide fuel that will last a full day.
• Lightweight - Only 4.5 lbs. for added comfort and control.
• Convenient Maneuvering - Cordless design and no hoses make work easier.
• No Mar Tip - Preserves smooth surface and prevents scratching and markings on work surfaces.

User questions & answers

Question:	What model is it
Answer:	This is Paslode model 902400.
Question:	How many batteries does it come with
Answer:	It comes with one battery. But that one battery will last for a few days of constant use.
Question:	Does the Paslode 902400 Cordless 16 gauge Angled Lithium Ion Finish Nailer come with a protective carrying case
Answer:	The case is an exceptionally made case but does not come close to the quality of this tool. Both make it an great value.
Question:	does it come with a battery charger
Answer:	Yes, these include the battery and charger. Your choice of nails and yellow trim fuel will need to be purchased separately. This is a great tool!

Product description

The NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is ideal for applications such as decorative trim, furniture trim, rail molding, crown molding, window casing, door installation, base boards, chair rails, picture frame assembly, and hobbies and crafts. Compatible with 16 gauge straight finish nails from 1" to 2-1/2", This air powered nail gun features a quick jam release for fast clearing in the event of a jammed fastener, along with a tool-free finger depth adjust for various applications. An ergonomically engineered die cast aluminum body makes this rugged and lightweight finish nailer easy to operate over extended periods of time. The comfort grip handle and No mar safety tip ensure great results by increasing precision and preventing damage to your working surface. A one piece drive blade of hardened steel adds to the durability of this nail gun. Air tool oil and adjustment tools are included. The Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is an essential tool for DIYers at home as well as professional contractors at the job site.

• Nailed It: This pneumatic 16-gauge straight finish nailer features a lightweight and durable aluminum body, and an ergonomic comfort grip handle. A no mar tip prevents dents and dings, and the quick jam release lets you easily clear jams without taking the nailer apart.
• Many Uses: This finish nail gun is great for interior and exterior finish and trim, furniture, cabinet work, staircases, base boards, shoe and crown moulding, window casing, and chair rail moulding. Sequential firing and tool-free depth adjust allow you to customize for any project.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Would this gun work for face nailing 3/4" Oak hardwood floors
Answer:	There are 2 light kits that will match the oil rubbed bronze finish of your fan, however it may not be 100% match but it is the closest to it. The part numbers are ; 77850 & 77846. Unfortunately, it is not remote control adaptable.
Question:	can you use 2" or 1-1/2" 16 gauge finish nails in addition to the
Answer:	These are ABS resin blades (acrylonitrile butadiene styrene).
Question:	Can you use 18 gauge nails
Answer:	There are a number of down rods that can give different hang lengths
Question:	Does this tool require an air compressor
Answer:	Approximately 11” diameter

Product features

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

Product description

RYOBI P325 18-Volt ONE+ AirStrike 16-Gauge Cordless Straight NailerCordless power drives up to 800 nails per chargeNo compressors, hoses or pricey gas cartridges requiredProvides optimum convenience and performance

• AIR PRESSURE ADJUSTMENT: A switch on the back of the unit allows you to increase the depth of your nail driving
• LED LIGHTING at the head allows you to see the job while you’re working in dim conditions. It can be activated by a separate trigger, too, which keeps you safe from accidentally firing off nails when you don’t want to
• LOW NAIL INDICATOR: Help prevent against dry firing by knowing that you need to replace the clip before you damage your woods
• TOOL-FREE ADJUSTMENTS: Knobs can adjust your depth, and you can flip out the front end to clear nail jams
• ONE+ COMPATIBLE: This tool is part of the One+ family, which means you can use this with Ryobi’s 18V batteries, including the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	Is this normal? I laid it flat on the floor overnight and when I checked in the morning there were some lubricant that oozed out on the motor side
Answer:	I too had some lubricant that was oozing out of mine. I would drop a few extra bucks and get the DeWalt....my Dewalt works perfectly every single time and doesn't make a mess.
Question:	How is this on hard wood like oak
Answer:	It works just fine on oak and every other wood I've tried.
Question:	Will this wotk with p191 3.0 ah lithium+ hp high capacity batteries
Answer:	In general any 18V ONE+ battery works with any 18V ONE+ compatible tool. As noted, this particular ASIN is TOOL-only and does not include the battery or charger). The tool is for use with ONE+ 18V nickel-cadmium and 18V lithium-ion battery packs. See tool/appliance/battery pack/charger correlation supplement 987000-432.
Question:	whats the difference between this tool and Ryobi Cordless BRAD NAILER 18GA Model P
Answer:	The main difference is between the nails that this and the P320 take. The P320 takes 18 gauge brad nails and this tool takes larger 16 gauge finish nails. Functionally, the smaller brad nails have less holding power but are less visible since they have a smaller head. The larger brad nails are good for things such as base-boards but are more than you would generally need for things such as trim. In my research, I was told several times that if you are only going to get one nailer, get the larger 16 gauge finish nailer. This is because you can still the 16 gauge for trim (it just needs some caulk to cover the holes) but you generally cannot use the smaller 18 gauge brad nails for things that require more power (like base-boards).

Product description

PORTER-CABLE PCC792LA 20V MAX Cordless Lithium 16GA Straight Finish Nailer Kit is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges. The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. Kit includes: PCC792 Nailer, PCC680L Battery, PCC691L Charger.

• 100% battery power: Eliminates need for a compressor, hose or costly gas cartridges
• Multiple Tool Free Settings: provide increased productivity and user safety
• Motor design: provides consistent firing power into various materials and climate conditions
• Multiple tool free settings: Provides increased productivity and user safety
• Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails

User questions & answers

Question:	where can you find extra batteries
Answer:	The short answer is extra batteries should be available from the place you got the tool. The longer response would be Amazon or big retailers such as Lowes and Home Depot.
Question:	I'm installing pine flooring (softer wood) will this tool get the job done
Answer:	yes you can set the impact for thickness and hardness of wood
Question:	Is it more powerful than the Arrow 200 Electric brad nailer? And does the battery charger have trickle charging
Answer:	I have had 2 different electric nailers. Also have had and still use two 18 volt 18 gauge nailers. One is a combo brad/staple nailer. I must say this 16 gauge Porter-Cable is the most powerful nailer I own. It does have a trickle charge as well. This a GREAT nailer.
Question:	Is there a roofing nail available with this gun
Answer:	No, it uses 16 gauge brads only. You would need a specific roofing nail gun.

Product description

The NT1865DMS 16-Gauge Cordless Finish Nailer allows the user to move easily around the job site without hoses or compressors



Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,500 nails per charge.



It employs a unique air spring drive system (similar to Metabo HPT's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy main10ance if the need should arise due to fewer parts to manage.



It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light .



This 16-Gauge cordless finish nailer drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

• 16 Gauge cordless finish nailer
• INCLUDES: NT1865DMS Cordless Finish Nailer, Compact 3.0Ah Lithium Ion Battery BSL1830C, Charger, Contractor Bag, Safety Glasses
• APPLICATIONS: For molding install, cabinetry, and finish work
• FAS10ERS: Accepts 16 gauge 1-in to 2-1/2-in straight finish nails
• POWER: 1,500 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery
• MAGAZINE: Straight magazine holds 100 16-gauge fas10ers from 1" up to 2-1/2" in length
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for flush drives into various materials

Product description

This CRAFTSMAN V20 MAX 16GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.

• CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 16 gauge finish nails
• Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
• Provides consistent firing power in various climate conditions and materials
• Tool free depth settings for quick set up and consistent results
• Tool free jam and stall settings for ease of use and improved efficiency
• Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
• Contoured overmolded handle for added comfort during use

User questions & answers

Question:	Can this use both 16ga and 18ga nails
Answer:	No 16 Gauge only.
Question:	Are there any plans to start manufacturing this tool in the USA(using global parts
Answer:	There are no announced plans for the nailers at the moment.
Question:	How does this load
Answer:	From the bottom
Question:	Does the 16ga(cmcn616c1) finish nailer kit come with the battery charger
Answer:	Yes, the CMCN616C1 will include (1) batter and (1) charger.

Product description

The DEWALT DWFP72155 15 GA PrecisionPoint™ "DA" Style Angle Finish Nailer drives 15 Gauge DA style nails from 1-1/4 in. to 2-1/2 in. making it ideal for interior trim, baseboards, crown molding and more. With its 16 in. On-center gauge to measure exactly 16 in. from end to nose, and PrecisionPoint™ technology for precise nail placement, this tool is ready to work.

• Precision Point™ Technology: Precise nail placement due to a smaller nose, compared to current DEWALT nailers, and no need to compress the contact trip to actuate the tool
• Long-life, maintenance-free motor helps to keep from staining the work surface
• Tool-free jam release mechanism for easy nail removal
• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	Is the nail recommended for this tool easy to find, is there troble in finding nails for this tool
Answer:	"DA" angled finish nails are 35 degrees.
Question:	Is it a pneumatic tool
Answer:	Yes, because these nails are DA-style (34° angle), just like the Bostitch btfp72155.
Question:	Is the dewalt dwfp72155 15 gauge a 34 degree nailer
Answer:	Traditional Bostitch's FN style (25 degrees) is unique to its brand. However, the newer Bostitch DA style (34 degrees) of finish nailer will work with the corresponding angled finish nails.
Question:	What about recoil
Answer:	I would call a local tool repair shop. Unless you acsess the parts detailed list online at Hitachi website.

Product description

The Makita 16 gauge straight finish nailer (model AF601) combines a myriad of features and powerful performance in a compact size. The AF601 has a rear-loading magazine that accepts standard 16 ga. Straight finish nails sized 1" to 2-1/2". the nail Lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 3.8 lbs., the AF601 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air Duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

• Efficient motor design offers leading power performance
• Nail lock-out mechanism protects tool and work surface from dry-fires
• "Tool-less" depth adjustment for more precise flush and Countersink nailing
• Built-in air duster provides convenient air flow to clear work surface
• 2-mode selector switch for control over nailing operation

User questions & answers

Question:	Why does it say corded electric for power source
Answer:	Yeah it’s that BPA free plastic. It’s super light weight. I microwave it and dishwasher clean it. It’s perfect for my elderly mother who has bad arthritis and can’t use a traditional coffee mug.
Question:	How well does it work with hardwoods
Answer:	This mug is lightweight. It holds 16 ounces of whatever drink you choose. I'm 87 and I love it, have no difficulty holding it. Guess it depends on the strength of your hands.
Question:	where is this made
Answer:	Hi, thanks for asking. The "wrap" is a the decoration method. The design is printed on material that is then "wrapped" about the whole tumbler. Have a good day.
Question:	Will this gun bump fire
Answer:	No, its not glass. Its double-walled plastic. I have several Tervis mugs and love them. Beautiful quality. Some have lids included, but Tervis has lids, sold separately, also Several styles, with a place for a straw, if preferred.

Product features

Makita AF601 16 Gauge, 2-1/2" Straight Finish Nailer

The Makita 16 Gauge Straight Finish Nailer (model AF601) combines a myriad of features and powerful performance in a compact size. The AF601 has a rear-loading magazine that accepts standard 16 ga. straight finish nails sized 1" to 2-1/2". The nail lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 3.8 lbs., the AF601 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

Includes:

3 Year Warranty

Pnewumatics - 3yr. Warranty

Each Makita Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund.

Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited does not apply to Makita Pneumatic Nailer Accessories.

This warranty does not apply where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. Normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The Pneumatic Nailer has been abused, misused, improperly maintained or operated. Improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose,' after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Paslode 16-Gauge. Pneumatic Finish Nailer has a best in class design that allows for comfort in all applications. This is a reliable and durable tool you can trust to keep up with you. The oil-free design allows for long term, maintenance-free operation which reduces cleanup time and associated costs. Experience non-stop nailing with Paslode trim nails.

• Powerful Precision - Nails with powerful precision for hardwoods, crown molding, and other finish applications.
• Convenient Design - Flared out trigger allows for 2 finger placement to assist the index reach and handle can be fully gripped for improved comfort and balance.
• Low Maintenance - Oil-free design allows for a long term maintenance-free operation which reduces cleanup time and associated costs.
• Best In Class Ergonomics - Designed with enhanced features to optimize balance, maximize comfort, reduce fatigue and increase productivity.
• Consistent Nailing - Each time the trigger is pulled, the nail drives flush into the trim.

User questions & answers

Question:	Can this bump fire
Answer:	Yes
Question:	Do they sell just the drive pin replacement
Answer:	I'm sure they do. Look it up with the model number added.
Question:	I don't see what length of nails this gun can use. Anyone know
Answer:	The nail range for this pneumatic finish nailer is 1" - 2-1/2".
Question:	USA made
Answer:	This tool is made in Taiwan.