11 best porter cable finishing nailers

Product description

PORTER-CABLE PCC792LA 20V MAX Cordless Lithium 16GA Straight Finish Nailer Kit is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges. The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. Kit includes: PCC792 Nailer, PCC680L Battery, PCC691L Charger.

• 100% battery power: Eliminates need for a compressor, hose or costly gas cartridges
• Multiple Tool Free Settings: provide increased productivity and user safety
• Motor design: provides consistent firing power into various materials and climate conditions
• Multiple tool free settings: Provides increased productivity and user safety
• Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails

User questions & answers

Question:	where can you find extra batteries
Answer:	The short answer is extra batteries should be available from the place you got the tool. The longer response would be Amazon or big retailers such as Lowes and Home Depot.
Question:	I'm installing pine flooring (softer wood) will this tool get the job done
Answer:	yes you can set the impact for thickness and hardness of wood
Question:	Is it more powerful than the Arrow 200 Electric brad nailer? And does the battery charger have trickle charging
Answer:	I have had 2 different electric nailers. Also have had and still use two 18 volt 18 gauge nailers. One is a combo brad/staple nailer. I must say this 16 gauge Porter-Cable is the most powerful nailer I own. It does have a trickle charge as well. This a GREAT nailer.
Question:	Is there a roofing nail available with this gun
Answer:	No, it uses 16 gauge brads only. You would need a specific roofing nail gun.

Product description

The Porter-Cable 16-Gauge Finish Nailer is ideal for Interior trim, Crown Molding or Staircases. This Nailer drives 16-Gauge straight finish nails from 1 in. to 2-1/2 in. Toll-Free Depth-of-drive adjustment allows for proper and consistent setting of nail heads.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	does this nailer require oil
Answer:	I wrote Streamlight regarding a charging question, they never returned my email, so I would not purchase anything from them, if they will not answer a question after a purchase, I doubt they will honor a warranty claim anyways.
Question:	How to unload nails
Answer:	It's been a while since I have had that one but it was about 8" long
Question:	is this different than a brad nailer
Answer:	We do not use the holster. It is a GREAT light
Question:	Can this shoot nails with a full, unclipped, round head? I need the nailer for some fencing
Answer:	try opening it at the light head

Product description

The Porter-Cable BN200C 18GA 2-Inch Brad Nailer Kit has a magnesium body that delivers both a strong and lightweight design. The brad nailer features a removable non-marring nose tip with on tool storage as well as an integrated rubber grip for improved comfort. The BN200C is equipped with a low nail reload indicator to help alert when to reload and has a special hardened driver blade for longer life. The BN200C kit includes : Nailer, ¼” fitting, carrying case and owners manual.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work
• Drives 18 gauge nails from 5/8-Inch to 2-Inch length

User questions & answers

Question:	Does this gun shoot staples as well? If so what size staples
Answer:	It has a D-ring at the top of the clip, my turnout coat has a clip that I clip it to.
Question:	Will Bostich brads work in this gun
Answer:	Says Engineered in the USA, Made in China on the box...... I didn't know that either till I just looked at the box. Kind of disappointing.
Question:	what size brads come with it
Answer:	Can be charged by either one.
Question:	Does this nailer also use finishing nails? And does it countersink the brads and nais? Thank You One more thing. Is it better to use 16 GA? or stay with 18? Building small projects like bird houses. Thanks again. Never used a nailer before. Old school. Use nail sets and the like. Ooops There goes my age. HA HA HA Tha
Answer:	Can be purchased with USB charger and 1 battery or with piggy back charger with 2 batteries.

Product description

PORTER-CABLE PCC792B 20V MAX Cordless Lithium 16GA Straight Finish Nailer Bare tool is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges (Battery sold separately). The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1” to 2-1/2” and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety, and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. *This is a bare tool item/battery sold separately. Includes: PCC792 Nailer.

• Multiple Tool Free Settings: provide increased productivity and user safety
• Motor design: provides consistent firing power into various materials and climate conditions
• Multiple tool free settings: Provides increased productivity and user safety
• Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails
• Battery sold separately

User questions & answers

Question:	How do you adjust the pressue
Answer:	I think the answer is in your question. You definitely want a dimmer that's LED compatible
Question:	Is this nailer compatible with the pcc681l battery (1.3a 20v black battery
Answer:	I don't know what it is made of but no different from my other 4 ceiling fans. Mine doesn't stink. I love this fan.
Question:	will it work with 16 gage brad nails
Answer:	I assume you mean when the LED stops working. :-) The LED really is not replaceable So if you wanted to continue having a light you would need to replace the entire fan. Having said that, the LED light should last for 10 to 20 years before that happens
Question:	Can i use 18ga nails on this too or just 16ga
Answer:	Yes. We have two of this fan and both are mounted on angled ceilings with about a 45° pitch. I believe it requires an adapter which costs no more than $10-15 at any Lowe’s or Home Depot, but regardless we have two of the same fan successfully mounted on angled ceilings.

Product description

The Porter-Cable RN175C Coil Roofing Nailer is designed with a compact body for better balance and control. This nailer features an adjustable shingle guide and Quick-Set depth of drive that allow accurate and less damaging shingle placement. An over-molded grip and tool-free adjustable exhaust make this nailer more comfortable for extended use.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

Product description

Length: Multi size. Gauge: 18 GA. Finish: galvanized. Fastener Type: trim. Number in package: 900 PK. Coil type: glue. Head style: offset. Point Type: chisel. Shank Type: brad. Material: steel. Collation type: glue. Includes: 3/4 Inch - 300, 1-1/4-Inch - 300; 2-Inch - 300 Baseboard nails.

From the Manufacturer

Porter-Cable 3 in 1 project pack of 18 gauge finishing nails. Pack includes 900 nails (3/4 Inch - 300, 1-1/4-Inch - 300; 2-Inch - 300). Ideal for use in IPG Tools: DEWALT: D51238K, DC608K; Porter-Cable: BN200A, BN200B.

• Fastener Gauge: 18
• Pack Quantity: 900 (3/4 Inch - 300, 1-1/4-Inch - 300; 2-Inch - 300)
• Fasteners Per Stick: 100
• Fastener Coating: Galvanized
• Fastener Point Type: Chisel

User questions & answers

Question:	Will this work with my porter cable bn200sb? i think it is a newer model of the bn200b which is listed as a gun that works with these nails
Answer:	Yes they are galvanized.
Question:	Are they galvanized
Answer:	good product would stick to nail gun brand dont know
Question:	Can you use for Ryobi 18gauge nail gun
Answer:	The nails are 3/4
Question:	the photo of the pack indicated 3/4 not
Answer:	Mfg info says it will work with most 18ga. brad nailers so if yours is 18ga. it should work

Product features

PORTER-CABLE BN18PP 18 Gauge Brad Nail Project Pack

Our 3in1 Project Pack of 18 Ga. Brad Nails includes 900 nails (300 x 3/4 in., 300 x 1-1/4 in., 300 x 2 in.) for use in a variety of applications.

• Fastener Gauge: 18
• Pack Quantity: 900 (3/4": 300; 1-1/4": 300; 2": 300)
• Fasteners Per Stick: 100
• Master Pack Quantity: 10
• Fastener Coating: Galvanized
• Fastener Point Type: Chisel
• IPG Tools: DEWALT: D51238K, DC608K; Porter Cable: BN200A, BN200B

Product description

Compatible with: FN250C Type 1, FN250C Type 2, FN250C Type 3

• Sold on Amazon

User questions & answers

Question:	Will this fit model # BN200A
Answer:	No battery level indicator, but it has a light on the side that turns red when it needs to be charged. That is also the charge indicator, it stays red while charging until it is fully charged, then it turns green.
Question:	Will this work on the fn250a nailer? i know the part looks different but will it work
Answer:	Yes - You can send it back to Streamlight Turn around time was only like 7 days that’s prior to Corona Virus If u call them they can give you the address-I am unsure of what changes were made due to the virus
Question:	Wii this work on a pfn1654 nailer
Answer:	Looks like 90627 is the light with charger. The 90633 unit is the same light but the charger is different. It has an extra port to plug in a spare rechargeable battery for those lights. I have both styles of chargers, they do come in handy. Also you need to make sure the light you want it comes in "spot & flood style lights
Question:	Will this fit the DA250B
Answer:	This is the alkaline version of the Knucklehead, but this light will also accept a NiCd battery pack to use with a charger (sold separately).

Product description

Compatible with: FN250B Type 1, FN251 Type 1

• Genuine, OEM Porter Cable Replacement Part
• Porter Cable replacement overhaul kit, part number 904949
• Compatible with: FN250B Type 1, FN251 Type 1
• Measures approximately 8.25 X 4.25 X 2.00 inches

User questions & answers

Question:	Is a piston stop in the kit
Answer:	The one I had recently had shipped to me on 6/1/20 is micro usb I use the same charger for my samsung phone

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

Includes 1000003300 No Mar Pads. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Porter Cable FN250C Type 1 16 Ga. 2-1/2" Finish Nailers Kit

• Includes 1000003300 No Mar Pads
• New, Bulk Packed
• Genuine Porter Cable Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

User questions & answers

Question:	Will the porter cable fn250c finish nailer kit (4 pack) no mar pad # 1000003300-4pk fit a porter cable fn250b
Answer:	I run mine on 110 psi.

Product description

The Porter-Cable DA250C 1-to-2-1/2-inch 15-gauge Angled Finish Nailer comes with a maintenance-free motor for added reliability and longer tool life.

The Porter-Cable DA250C 1-to-2-1/2-inch 15-gauge Angled Finish Nailer comes with a maintenance-free motor for added reliability and longer tool life. With the ability to drive 1-to-2-1/2-inch 15-gauge "DA" style angle finish nails, this brad nailer features an internal piston catch for consistent maximum power on every shot, a tool-free adjustable exhaust to keep contaminates away from the work, and a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. Also included is a tool-free jam release mechanism for easy nail removal and a sequential style trigger with a lock off switch. Other features include a contact safety located behind driver guide for better visibility, an adjustable belt hook, an integrated rubber grip for improved comfort, and a low nail reload indicator. With a 100-nail magazine ( which can be loaded as a rear load and lock style), this nailer's single mode (sequential fire) operates at 70-to-120 PSI for added versatility. Its strong and lightweight die-cast aluminum body measures 9-3/4 x 10.4 inches and weighs 2.6 pounds.

From the Manufacturer

Featuring a long life maintenance/oil-free motor that prevents oil from staining the work surface, an internal piston catch for consistent max power on every shot, and a rear exhaust that keep contaminates away from work, the DA250C is part of the newest generation of Porter Cable finish nailers. With the ability to drive 15 gauge nails from 1" to 2 1/2" in length, a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, a sequential style trigger with lock off switch and a removable non-marring nose tip with on tool storage, the DA250C meets all of the requirements that the discerning end user demands. Includes: Nailer, safety glasses, one ¼” fitting, finish nails and carrying case.

• Drives 15 ga. DA style angle finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal
• Maintenance-free motor designed to deliver long life
• Internal piston catch for consistent max power on every shot
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Drives 15 ga. DA style angle finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal

User questions & answers

Question:	I need a sequential trigger
Answer:	If you can get something closer to 58 to 60 that would be good. If that's the only length they have I would get it any way, Its hard to find these blinds in certain lengths. If you don't buy it someone else will. Its 30 days to return, as long as there's no damage from use.
Question:	What is required CFM
Answer:	The largest width size we carry is a 48 inch.
Question:	Will this nailer be good for hanging a pre-hung oak door with oak frame
Answer:	They are not lined. I was worried about buying these online because I thought the quality might not match some custom shades I had previously had installed in my house (which I paid A LOT more for). The quality of these shades is just as good. Be sure to measure carefully.
Question:	which nails can be used in this nailer beside porter cable nails
Answer:	As long as they are not getting directly wet. Humidity is fine. We have solar shades that can get wet if you upgrade to outdoor brackets.