14 best dr nail guns

Product description

The SENCO? SLP20 Brad Nailer drives both slight-headed and medium-headed brads in a wide range of lengths. As the result of extensive customer research, the SLP20 design ensures unmatched ease of use as well as superior precision and driving power, which makes the tool suitable for fastening a variety of material types and thicknesses.

• Drives a wide range of both slight-headed and medium headed brads to give you two tools in one.
• Weighs only 2.3 lbs. - the lightest weight available in a brad nailer - for easy maneuvering and handling in small places.
• Features easy side loading that allows you to choose brad length without adjusting tool, plus an E-Z Clear jam feature allowing easy removal of a jammed fastener.
• Superior power (40% more than comparable tools) makes it suitable for use on hardwood, plastics, and particleboard.
• Oil free design means easier maintenance and no lubrication to stain fine woods.

User questions & answers

Question:	Does this nailer have depth adjustment. Just wondering as i cannot see it in the photo
Answer:	Both the air and sand inlet are 1/4 inch npt.
Question:	Country of manufacture
Answer:	The OD measurement of the barbs on the suction/inlet nipple of the gun is 1/2". The ID of my suction hose is maybe 5/8", it secured by a hose clamp. I like the heft and quality of the tips on this gun, as they are heaver than my on my old gun. Hope this helps!
Question:	Please let me know the midel of 18ga senco nails that will fit on this senco slp20xp
Answer:	Yes, i can
Question:	What size nails does this use
Answer:	60gal

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The Makita 18V LXT Lithium-Ion cordless 2-1/2” straight finish nailer, 16 GA. (model XNB02Z, tool only) is an ideal solution for trim work, baseboard and crown molding installation, flooring and other woodworking applications. The XNB02Z is compact and powerful, and drives standard 16 gauge straight finish nails from 1” to 2-1/2” in length with a magazine capacity of up to 110 nails. Using an 18V LXT 5.0Ah battery (sold separately), the XNB02Z will drive up to 1, 000 finish nails on a single charge. Additional features include an anti-dry fire mechanism that is engineered to help prevent driving blanks and damage to work surface. It has a 2-mode selector switch, trigger Lock button, and “tool-less” depth adjustment for precise flush and Countersink finish. It's part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls . Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

• Powerful motor design drives standard 16 gauge, straight finish nails from 1" to 2-1/2" in length
• Drives up to 1, 000 finish nails using a 5.0Ah 18V LXT battery (battery not included)
• Cordless for increased convenience, eliminates the need for a compressor and air hose
• Compact center height enables viewing around the nose tip when fastening in tight spots
• Anti-dry Fire mechanism engineered to help prevent driving blanks and damage to work surface. The reversible belt clip allows the tool to remain close

User questions & answers

Question:	Where was it made
Answer:	The model BTFP1850K requires some oil lubrication.
Question:	How long was the ramp up time
Answer:	Please contact BOSTITCH at 1-800-556-6696 for any warranty assistance.
Question:	How long is the recycle time between nail shots
Answer:	The black part on the back of the gun is the exhaust deflector.
Question:	Where can I get a case for it
Answer:	Mine did not have a case,

Product features

Makita XNB02Z 18V LXT Lithium-Ion Cordless 2-1/2" Straight Finish Nailer, 16 Ga., Tool Only

The Makita 18V LXT Lithium-Ion Cordless 2-1/2” Straight Finish Nailer, 16 Ga. (model XNB02Z, tool only) is an ideal solution for trim work, baseboard and crown molding installation, flooring and other woodworking applications. The XNB02Z is compact and powerful, and drives standard 16 gauge straight finish nails from 1” to 2-1/2” in length with a magazine capacity of up to 110 nails.

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams

User questions & answers

Question:	Where do I get the end tips at
Answer:	That no-mar tip, as it's called, is no longer available. https://www.ereplacementparts.com/dewalt-dcn680b-type-20v-18ga-brad-nailer-parts-c-1009_1165_567196.html
Question:	Is the 20v battery included
Answer:	No, the battery was not included.
Question:	What is max nail length
Answer:	The Dewalt brad nailer shoots brads from 5/8” up to 2-1/8”. Hope this helps.
Question:	Does anybody know which dewalt nailer would be a good all around gun for trim to framing in one
Answer:	Unfortunately, there is no such gun made. By any manufacturer. A nail that would be strong enough for framing, would absolutely destroy trim pieces.

• 📢Friendly customer service: we provide new replacement instead of repairing.
• FOR FREE---Tools includes 200 staples and 800 brad nails.
• 🔰CONVENIENCE --The wire 2-in-1 brad gun/staple gun doesn't need compressors, hoses for convenience use.
• 🔰WIDE APPLICATION -- The upholstery nail gun ideal for softwood DIY projects such as Carpentry DIY, picture framing, door or window molding installation, pet house DIY while not recommended for quarter round, baseboard, drywall installation, roofing and flooring.
• 🔰FLAWLESS FINISH -- Non-Marring rubber nose provides a complete finish.
• 🔰FRIENDLY USE -- The wire 2-in-1 brad gun/staple gun equipped with ergonomic soft-grip handle for reducing worker fatigue.
• 🔰ADJUSTABLE POWER -- This electric brad nailer designed with adjustable power function for light-duty project.

User questions & answers

Question:	Mine will fire but it wont shoot any nails and i have not even used it for a day
Answer:	I could get mine to shoot, but it wouldn't go into soft trim more than 1/8 inch. That was maximum depth... Most were less than half that. I sent it back.
Question:	Repairing rattan rawhide bindings. Will this shoot 23 GA, 3/16" crown, 3/8" leg
Answer:	Hello Customer, No, this electric Brad Nailer/Stapler drives 18 GA brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1". Using improper nails/staples may cause operational problems. Hope this can help you. If there is anything issue we can help you, please do not hesitate to contact us via [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	podrias especificar con que grapas es compatible y donde se puede adquirir las grapas
Answer:	Puedes conseguir las en Walmart o cualquier ferretería. A mi me a sido muy útil.
Question:	Electric brad nailer, neu master ntc0040 electric - does this model drive 1”, 1 1/2” and 2” brads
Answer:	Hello Customer, The longest brad nails can be used for this electric brad nailer/stapler is 1-1/4''. And this length is recommend for soft wood. Hope it can help you. If you have any issue or need help during use, please do not hesitate to contact us via [[email protected]] and we will do our best to serve you. Spartatool Support Team

Product features

Product Overview

The NEU MASTER NTC0040 Electric Brad Nailer/Stapler drives 18 gauge brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1" which makes it ideal for general repairs, craftwork, interior or exterior decorative lightweight trim, upholstery, and more. No compressor needed and the nail gun features a quick-release mechanism and an overmolded grip for convenient use. Kit includes a Brad Nailer Stapler, 400pcs 5/8'' brad nails, 400pcs 3/4'' brad nails and 200pcs 3/4'' staples.

• Drives nails and staples
• Ergonomic grip for comfort and control
• Power adjustment dial and oversize trigger
• Quick-release mechanism
• Contact safety with non-marring nose provides a flawless finish

Product description

The Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer is specifically designed for working on cedar shingles, roof and wall sheathing, siding, and fencing, and is compatible with 15 degree 13-14 gauge plastic or wire collated siding nails from 1-1/4" to 2-1/2". The nails load from the side fast and easy for efficiency. The body of the oil-free nail gun is made of lightweight and rugged die cast magnesium, creating a low maintenance tool great for use over extended periods of time. A one piece hardened steel drive blade and an anodized aluminum cylinder add to the durability. The siding nailer's bump fire trigger drives nails with precision and features a safety lock to prevent accidental firing. The convenient tool-free finger depth adjust provides fast and easy control of the depth of the nails, while the comfort grip handle helps reduce fatigue and increases accuracy. A no mar safety tip prevents damaging your working surfaces. This air powered nail gun also contains a 360 degree adjustable exhaust to direct air away from your face, and an air filter / anti-dust cap to keep internal components free from dust and debris. A belt hook, safety goggles, air connector, air tool oil, and adjustment tools are included. The Pneumatic 15 Degree 2-1/2" Coil Siding Nailer will allow you to tackle DIY projects as well as professional jobs. Operating Pressure - 70 – 110 psi. Fastener Diameter: 0.09" – 0.113"

• Nailed It: This pneumatic coil siding fencing nailer features a lightweight and durable magnesium body, ergonomic grip handle, no mar tip, and transparent side load magazine that holds up to 400 wire or plastic coated siding nails for hard-working efficiency.
• Many Applications: This nailer is ideal for cement siding, sheathing, fencing, fiber concrete siding, decking installation, plywood, and OSB. It features depth adjustment, allowing you to customize the firing depth for many different types of projects.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What does this nail gun weigh, unloaded
Answer:	These can cut and strip Romex / NM-B
Question:	Does this shoot .090 nails
Answer:	yes they are
Question:	does anyone know how well does it shoot 11/4 nails into cedar shakes
Answer:	it works
Question:	Will this nailer feed and shoot 1 7/8 aluminum screw shank, plastic collated, Duo-Fast nails
Answer:	Yes, as long as the AWG is between 20 and 30. Most communication wire is AWG 24, 26, so it would work. But, it is up to you to know the AWG of the wire you are using. If you use a hole that is too small in the stripper, you could nick the conductor and that would not be good. It's critical the proper AWG hole is used for the AWG wire.

Product features

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

Product description

The NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge Flooring Stapler and Nailer is designed for the installation of tongue and groove hardwood flooring. This air powered flooring nail gun and stapler is compatible with 16 gauge T-cleats and L-cleats and 15.5 gauge 1/2" crown staples from 1-1/2" to 2" for all three types of fasteners. Two interchangeable no mar base plates allow you to install 1/2" to 3/4" flooring while protecting finished flooring surfaces, ensuring professional results for DIYers tackling home improvement and repair projects as well as construction contractors at the job site. Durably constructed of die cast aluminum and heat treated steel parts, this tool is both rugged and lightweight. The ergonomically designed handle has a rubber grip, providing for additional ease of use during long shifts. Recent upgrades include a smaller tool body, a semi-quick release for easier access to the drive blade to clear jams, a magazine cover for smooth fastener feeding, and an improved base plate design. The value provided by the revolutionary design of this innovative tool comes at far less expense than three separate tools. The Pneumatic 3-in-1 15.5-Gauge and 16-Gauge Flooring Stapler and Nailer includes a white rubber mallet, air tool oil, and adjustment tools. Operating Pressure 70 – 110 PSI, Magazine capacity 90 – 120 Staples. Compatible fasteners 16 Gauge Glue Collated T and L Cleats from 1-1/2" – 2", and 15.5 Gauge Glue Collated 1/2" Crown Staples from 1-1/2" – 2"

• Nailed It: This pneumatic flooring nailer and stapler features a lightweight aluminum body, ergonomic comfort grip handle, replaceable base plate and 3-in-1 design that allows it to easily switch between T-cleats, L-cleats and staples for maximum functionality.
• Ergonomic Design: This flooring nailer has an extended handle to prevent achy backs and a light strike bumper for low impact fastener driving. It comes with a rubber mallet to move flooring in place. It's ideal for professional jobs and home DIY projects.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	I need a replacement baseplate for 1/2" flooring is it possible tho by a replacement
Answer:	The only recommended fasteners are 16 gauge "T & L" cleats and 15.5 gauge staples.
Question:	Can I use it for 16ga finish or brad nails in this gun
Answer:	Hey I"m about to install Brazilian Cheery 3/4" wood too - how did it go for you???@@@
Question:	Has anyone installed 3/4 inch 3 1/2 in wide Brazilian Cherry hardwood with this gun using 16 ga 1 3/4 in L cleats. Did it work OK
Answer:	Yes, you can use any brand or Bostitch nail
Question:	Can I use any brand nailers with the NuMax SFL618 ? Recommendations...Bostitch ok
Answer:	Not at this time

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2" Flooring Nailer and Stapler is lightweight power tool can be used to finish your projects or repairs as it features an aluminum body, ergonomic comfort grip handle, replaceable base plate and 3-in-1 design that allows you to easily switch between T-cleats, L-cleats and staples for maximum functionality.

Easy to Use

This tool by NuMax can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. This tool is also extremely safe to be used as it comes in a die cast aluminum body and a quick release for clearing jams.

• Air Inlet: 1/4 inch NPT Thread
• Operating Pressure: 80-120 PSI
• Driver Diameter: 0.16 inch
• Removable Nails Range: 10-20 gauge

User questions & answers

Question:	How to change o rings
Answer:	Same battery. they are interchangeable, The charger too. same. I have had great luck with the two I own. I wish they made a framing nailer.
Question:	Will it countersink nails in a 2x6 wood deck. Need to prepare boards for sanding. thanx
Answer:	I have used 2".
Question:	Will this tool drive nails through unplaned 3/4" fir siding boards into studs (removing nails completely from the siding boards
Answer:	According to the Senco manual I received with my Cordless F-18 nail gun (manual lists units F-15, F-16A, F-16S, F-18), "Senco warrants that the Senco Cordless tool will be free from defects in materials and workmanship for two years after the purchase date. Senco warrants that the batteries and chargers used with Senco Cordless tools will be free from defects in materials and workmanship for one year after the purchase date"
Question:	Will it pull the nails out of thin pallette wood so that you can re-use that piece of wood? Easily? How does it work
Answer:	Good Morning, Thank you for emailing us about the Senco FramePro 701XP Clipped. This does not have a rafter hook. I hope you havea great day!

Product features

Product Description

Air Locker AP700 is a powerful tool designed to push out nails from a variety of soft and hard woods without affecting the quality. With a lightweight die cast Aluminum body.

AP700 isn't only highly durable but features an ergonomic rubberized grip so you can work for long hours without any fatigue.

The tool comes with a slim elongated nose that easily gets into cramped spaces while hardened hammer delivers a powerful blow to remove the nail. Now you can denail reclaimed wood like a pro. You'll need an air compressor for usage.

APPLICATIONS:

• Remove nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and wooden decks.
• Works with different types of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, Osage orange, White Oak and Maple.

Rubberized comfort grip for fatigueless use

Often you need to work long hours when you have large project. AP700 comes with a rubberized ergonomic grip that doesn’t only feel great in your hand but keeps you going preventing fatigue and soreness.

Denail boards/pallets without any damage

Why spend hours removing nails manually when you can denail wood in a matter of minutes? This amazing nail puncher brings you exceptional portability that you'll appreciate. Removes or sinks nails between 10-20 gauge sizes.

Lightweight durable die cast Aluminum body

Quiet and precise operation saves effort and time. The die cast aluminum body makes the device durable but the overall unit still weighs just under 2 lbs. and feels great in your hands. Ideal for recycling wood while maintaining its quality.

Push variety of nails out of hard woods

The nail puncher provides enough power to push nails out of thick pallets. You can also use AP700 to sink nails into a variety of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, White Oak and Maple.

Rubberized Ring Prevents Slidage

The nail puncher has a rubberized ring around the rear end of the unit to prevent sliding when you are not using it.

Directional Exhaust adds Convenience

The rear end also features a directional exhaust which you can rotate 360 degrees to direct exhaust away from your face or work area.

Product description

The NV83A5 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work. The NV83A5 is like the original NV83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power.

• LIGHTWEIGHT: Only 8.8 lbs (or 9.1 lbs if the rafter hook is installed) lightweight and well balanced for easy maneuverability
• POWER AND SPEED: Cylinder valve drive mechanism provides quick response and rapid, powerful driving
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• APPLICATIONS: For wall sheathing, roof decking, subflooring, packing and crating work, and more
• SELECTIVE ACTUATION: Selectable trigger mode; choose contact or single sequential actuation mode via switch in the trigger
• FASTENERS: Accepts 16° wire coil nails from 2-IN - 3-1/4-IN
• HARDENED CLAW TIP: Resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing

User questions & answers

Question:	Where is this made (country
Answer:	My local Home Depot did not carry Paslode roofing nails. I had read previous reviews stating you could use other brands of roofing nails. My nailer performed flawlessly. The coils were wound too tight to go straight into the gun, so I loosened the coil and inserted them.
Question:	Does this come with a “no mar” tip, if not can I buy one
Answer:	Where do I get the belt hook. And how in the hell can Hitachi consider themselves a premium brand and sell a ladder access tool without one? I'm livid.
Question:	can i shoot nails on concrete or cement blocks ? for furring strips
Answer:	Good morning, We offer a 60 day warranty. After your first 60 days you have a one year from date of purchase directly with Hitachi. Have a great day.
Question:	How long is the warranty
Answer:	I use it for siding facia and soffit. The nails have to be compatable with the gun. Don't have to be Hitachi brand. lots of generic brands out there

Product description

The BOSTITCH BTFP12233 Smart Point 18GA Brad Nailer Kit is the perfect tool to be used for cabinetry, upholstery and paneling. It allows you to choose from trigger system and countersinking options that best meet your project needs. The Smart Point Technology allows for easy nail placement as a result of a smaller nose compared to current BOSTITCH nailers and no need to compress the contact trip to actuate the tool. It drives 18 GA brad nails from 5/8" to 2-1/8" length. Oil-free operation reduces the risk of oil stains. Tool-free jam release mechanism for easy nail removal, Dial-A-Depth control for precise countersinking of brad nails, along with a selectable trigger system for sequential or contact operation. Other Features: 1/4" air fitting, rear air exhaust, and belt hook with integrated pencil sharpener. Specifications: Magazine Angle is Straight, Magazine Capacity is 100, Magazine Loading: Side Load, No Mar Pad, Operating Pressure is 70-120 psi.Kit Includes: Nailer, 1/4" Air Fitting, Carrying Case and Extra No-Mar Tips

• SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool
• DRIVES: 18 GA Brad Nails from 5/8 inches to 2 1/8 inches length
• TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal
• DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails
• KIT INCLUDES: Nailer, 1/4 inch Air Fitting, Carrying Case and Extra No Mar Tips

User questions & answers

Question:	Does the kit come with a carrying case or not? Description contradicts
Answer:	Yes, there is a carrying case included.
Question:	Power source in the description says “corded electric”. I thought the power came from the air compressor. Why am I having to plug it in as well
Answer:	Trust me, it is powered by an air compressor. In fact I used mine yesterday. This is a great product. Just remember to use compressor oil in the nailer before each use.
Question:	Is the trigger the only thing that activates the nail being fired? Seems less safe that way
Answer:	No, the nose of the nailer must be depressed to activate the nailer.
Question:	My moldings require a very accurate placement of the nail. Will the "smart point" be worth the extra money over other nailers
Answer:	Absolutely. I found the placement of the brads to be very accurate using the smart point. I use this nailer all of the time.

Product features

A Tool That Will Sort You Out

The BOSTITCH Nail Gun, Brad Nailer comes easily allows you to work on home improvement projects with ease. This power tool also comes with a trigger system and tool-free jam release mechanism for easy nail removal.

Convenient on the Jobsite

This power tool by BOSTITCH also features a ¼ inch air fitting, rear air exhaust and belt hook with an integrated pencil sharpener, giving you the ultimate convenience. This tool provides an improved control and flexibility when fastening into various types of materials. Not only will you find this tool convenient, but also find it super easy to use.

Ergonomic and Comfortable

The design of this power tool makes is simple and easy for nail placement due to a smaller nose. In addition, the ergonomic carrying case so that you can carry this nail gun to your workspace.

Product description

The Freeman P4FRFNCB Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Piece) is an essential set of tools for professional construction contractors at the job site as well as DIYers tackling home improvement and repair projects. This collection of air powered nail guns and a stapler covers your framing to finishing needs and includes a 21 degree 3-1/2" Full Round Head Framing Nailer (PFR2190), 15-Gauge 34 Degree Angle 2-1/2" Finish Nailer (PFN1564), 18-Gauge 1-1/4" Brad Nailer (PBR32), and 18-Gauge 1-1/4" Narrow Crown Stapler (PST9032). The powerful framing nailer is specifically designed for tasks such as framing, sheathing, truss assembly, roof decking, subfloors, fencing, furniture, and assembling pallets and shipping crates. This durable nail gun features a one piece drive blade made of hardened steel and a lightweight magnesium body. Put the finish nailer to work on door and window casing, moulding, trim, chair rails, cabinetry, and other fine finish applications. The 34 degree angle of the magazine makes it easy to access corners or tight spaces, and the dual mode trigger allows to easily switch between sequential or bump firing. When the focus is on accuracy, use the sequential mode. When speed is the name of the game, engage the bump fire option and get to work. The brad nailer is ideal for interior and exterior finish and trim, furniture, cabinetry, picture frame assembly, and hobbies and crafts. An oil-free design eliminates the need for regular maintenance and prevents stains on your work surface. The narrow crown stapler is perfect for projects such as decorative trim, cabinetry, cabinet backing, and hobbies and crafts. The no mar safety tip prevents damage to your work surface, ensuring professional results. A canvas carrying bag, air tool oil, and adjustment tools are included. The Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Piece) will allow you to complete a wide variety of home improvement and repair projects quickly and easily.

• Powerful Combo: This kit features 4 of Freeman's most useful pneumatic nailers to cover all your framing and finishing needs: a framing nailer, a finish nailer, a straight brad nailer, and a narrow crown stapler. The kit includes a rugged canvas carrying bag.
• Heavy Duty and Fine Detail: The nailers included in this combo kit are ideal for everything from heavy duty work like subfloors, roof decking, fencing, and pallet building to fine detail work like cabinetry, crown moulding, window casings, base boards, and trim.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Any suggestions on a pancake compressor for these guns
Answer:	Mines not a pancake compressor, but it is around the same size. I have a 2.6 gallon 2 HP compressor that works beautifully with these guns. It fills to 120 psi, and I have a regulator on the compressor that allows 80-90 psi through, depending on the gun I am using at the time. I can usually shoot 20-30 nails before it has to get more pressure built up, but never dropping below 90 psi. Since the tank is so small, it takes only seconds to fill again. I'm not sure what the rules are on linking to other items, but I bought the compressor off Amazon.
Question:	should you use a water separator or oiler with nail guns
Answer:	The only specification with the Freeman nail guns is to provide oil to the system. So I have only been oiling since water is not a problem in the air system I'm using. Some of the air supply systems I have used previously needed a water separator. If you are not sure about the amount of water in your system a water separator might be a very good addition.
Question:	Has anyone had trouble with these nail guns working right
Answer:	I have been using my framing gun 3 days out of the week as I continue to remodel my house. I have used the 15 gauge and 18 gauge guns just as much without any problems. I don't know if it's related to the setup and continuos maintenance but I have a filter on the compressor and use the air tool oil. I never exceed 120 psi on my framing gun and I adjust to 75 to 90 for the other guns. I continue to have good service from these tools.
Question:	what kind of nails does it use
Answer:	I use Hitachi fasteners. GEt mine at Lowe's. Used the Stapler and Angle Finish Nailer today. Built our 16'x16' deck with the Framing nailer. Great set of tools. LOOK here: http://www.lowes.com/Search=hitachi+nails?storeId=10151&langId=-1&catalogId=10051&N=0&newSearch=true&Ntt=hitachi+nails#!&Ns=p_product_price|0&page=1&N=0&N=2z8vj&N=2z8vk&N=2z8vl&N=2z8vm

Product features

PFR2190 21-Degree 3-1/2-Inch Framing Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Anti-dry fire mechanism reduces damage on internal components.

Magnesium construction lightweight tool and great for extended use.

PFN1564 15-Gauge 2-1/2-Inch 34-Degree Finish Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

Dual-mode trigger easily allows for single or sequential firing.

PBR32Q 18-Gauge 1-1/4-Inch Straight Brad Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

PST9032Q 18-Gauge 1-1/4-Inch Narrow Crown Stapler

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

Product description

The RIDGID 3-1/2 in. Full-Sized Palm Nailer is compatible with 4d - 16d common bulk nails 1-1/2 in. - 3-1/2 in. L. It has a magnetic guide for precise fastener placement and a tool-free micro adjustable depth-of-drive to give you accurate depth while protecting your work surface. It is ideal where space prevents hammer swings or the use of bulkier tools and for positive placement applications. It operates at 50 psi -120 psi air pressure and has enough power to drive a 3-1/2 in. nail into solid wood. This tool is compact and features an optimal weight, 2.9 lbs. aluminum body with a zinc top cap for smooth drives. The adjustable hand strap and new and innovative Hex Grip texture will give you a comfortable and secure grip in every application.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	how do you add oil? mine has come with oil and allen wrench. but instructions says just add oil thru air inlet. what is the allen wrench for
Answer:	A few drops through the air inlet works perfectly. I believe the allen wrench is in case you ever need to open the case to replace the diaphragm.
Question:	Where is it made
Answer:	The box says “Made in Taiwan”. The nailer worked flawlessly, drove some very large spikes with it.
Question:	Partes de la herramienta palm
Answer:	Muy buena herramienta la recomiendo porque es resistible

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Compatible with all DEWALT 20V MAX* batteries
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Low nail lockout prevents dry firing and unwanted marks on the work material

User questions & answers

Question:	Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails
Answer:	THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2".
Question:	Is this the same battery of 20v max drill
Answer:	Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools.
Question:	Please confirm this kit includes the charging unit, battery and bag
Answer:	Mine came w/ those items since it is a kit & not tool only.
Question:	Can i nail 2x4 with this im building a garage
Answer:	Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage.