14 best coil roofing nailers

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

Remember when you could re-roof your roof? Nail shingles, insulation boards, waterproof tar paper, fiber cement roofing, siding, vinyl and more with the WEN Pneumatic Coil Roofing Nailer. The versatile magazine holds up to 120 nails at a time, allowing for sizes of 11-gauge (.12 inches) nails ranging from 3/4 of an inch all the way up to 1-3/4 of an inch. Adjust the depth of the fired nails by turning the depth-setting wheel found on the head of the nailer. Clear jammed nails with the quick-release compartment on the side of the magazine. The adjustable shingle guide easily slides up and down the bottom of the magazine to help with quick and easy spacing for shingles of any size. This powerful nailer provides up to 430-inch-pounds of force at a 100 PSI operating pressure, making sure your siding stays in place. The rubber grip handle helps limit fatigue and maximize comfort during long jobs while the turnable exhaust valve on top of the nailer lets users aim the direction of the output air. With a 1/4-inch NPT air inlet, drive fasteners using pneumatic pressure anywhere from 70 to 120 PSI. This package also includes a bottle of oil, three assorted hex wrenches and a convenient blow-mold carrying case for easily transporting your nailer. And, because its a WEN product, your coil roofing nailer comes backed by a one-year warranty and a friendly customer phone line all to make sure you remember WEN.

• Fire 11-gauge nails (.12 inches) anywhere from 3/4 to 1-3/4 of an inch
• Adjustable shingle guide and depth control makes for easy shingle spacing during jobs
• Holds up to 120 nails at a time with a quick release for easily fixing jams
• Uses pneumatic operating pressure anywhere from 70 to 120 PSI
• Includes a blow mold carrying case, oil, and hex wrenches

User questions & answers

Question:	Can this gun be used for siding
Answer:	It will shoot 1 3/4 na ils and they will hold hardi plank siding well
Question:	Can this gun be used for vinyl siding. The nail head has to fall short of full contact with the vinyl
Answer:	Yes. Just turn down the psi on your air compressor outlet till the depth is right. When you hit a stud then tap that nail with a hammer. Or get the crapy vinyl adaptor for the front that sets the depth for you. Bostich makes one.
Question:	what is the weight of this nail gun
Answer:	This gun is F ing HEAVY a little over 11 pounds compared to most other coil nailer that weigh 5 to 7 pounds
Question:	Does this gun take roofing nails made for 15 degree guns
Answer:	Yes, I nailed about 4 square this past summer with 15 degree nails. No problems at all.

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

• Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails;
• Adjustable shingle guide for quick shingle spacing;
• Integrated side skid pads prevent the tool from sliding off roof when placed on its side;
• High-capacity magazine holds up to 120 coil nails at a time; Tool free adjustable depth of drive for consistent and controllable nail fit; 360° tool-free air exhaust.
• Interchangeable trigger for single shot or bumper fire function.

User questions & answers

Question:	Does this work with hitachi hot dipped galvanized 16 degree nail coils
Answer:	We used the hitachi nails with ours.
Question:	how big of a compressor do you need
Answer:	A small pancake compressor will work you only need 90 psi
Question:	What comes with the gun
Answer:	safety glasses, hex wrenches, oil bottle, manual
Question:	can you rapid fire with it
Answer:	Idk if u could mess with it to make it rapid shoot, but as It comes u have to hit the trigger everytime u shoot the gun

Product features

Product description

The MAX CN445R3 SuperRoofer is a professional grade pneumatic roofing nailer. The applications for the CN445R3 include fastening asphalt and fiberglass shingles, fastening lath wire to plywood, the installation of siding, and wooden box assembly. The CN445R3 is equipped with a swivel plug to alleviate the tangling of the air hose and also features a trigger lock to prevent accidental firing of the tool.

• Tar resistant nose- designed to resist tar 4x longer than conventional tools.
• Full round head driver blade for better holding power.
• Magnet holds the last nail in place to prevent the tool from jamming.
• MAX patented maintenance free end cap filter prevents foreign substances from entering the tool helping internal parts last longer, requiring less maintenance on the tool.
• Dial adjustable depth control allows depth adjustment with no special tool.

User questions & answers

Question:	Does this come with a carrying case
Answer:	No, sorry.
Question:	What is the recommended coiled nail brand to use for no jam-ups
Answer:	Though it’s true, not all coil nails are created the same, as long as they keep there form (don’t get crushed in you pouch or stuff thrown on top of the coil nail box in your truck) you should be more or less fine. The gun you use also makes a difference. I’ve had good success with Max, also bostich. They seem to jam far less and are somewhat easier to unjam than other brands I’ve used, like my dads ridged and porter cable. But remember no gun and no nail brand, even if both Top tier, will be completely jam free.
Question:	What is the difference between this model and the CN445R model
Answer:	MAX SuperRoofer is in its third generation - the latest tool is the MAX CN445R3. The CN445R and CN445R2 are older tools. dh
Question:	Does it work for siding
Answer:	Most siding guns accommodate a 2 1/4” nail. This gun will hold 3/4”-1 3/4” inch nail. Most hardie type siding requires 1 1/2” in stud so it would work for that type of siding. As far as vinyl it will nail flush and not leave the expansion gap required

Product description

The BOSTITCH BRN175A bulldog 15 degree Coil roofing nailer combines performance and adjustability to handle roofing applications. This light weight 4.8Lb roofing nailer drives 3/4" to 1-3/4" Coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. There is a wheel to adjust the drive depth so that nails can be properly installed into a variety of materials. The exhaust cap can swivel so that the exhaust is always pointing away from the user, and the shingle guide under the magazine can be adjusted for proper shingle spacing.

• Upgraded engine and feed system improves drive quality, overall performance, and durability
• Dual door MAGAZINE can be closed multiple ways
• Oversized tool free depth adjustment for proper nail setting
• Carbide nose inserts help to protect the nose from wear
• Redesigned grip handle for better feel

User questions & answers

Question:	Does this nailer require a compressor
Answer:	Yes, this is pneumatic powered.
Question:	Where is made
Answer:	The country of origin of the BRN175A is Taiwan.
Question:	Does this also shoot siding coil nails
Answer:	It absolutely will NOT. I thought maybe it would from reading other reviews. It will just jam up every time

Product description

The Makita 1-3/4" Roofing Coil nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter Coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a "tool-less" Depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

• Faster nail driving speed for maximum performance
• Aluminum housing for longer tool life
• Lightweight design at only 5.2 lbs.
• Easy, one-step open, Adjustable canister system for faster, more precise nail loading
• “Tool-less” depth adjustment dial for more precise control in flush nailing shingles

User questions & answers

Question:	Could this be used to nail up fence boards
Answer:	no, You would be better off with a siding nailer the nails are longer and they are ringshank so they hold a lot better.
Question:	The Product Information says that this is corded electric for the power source. Isn’t it pneumatic
Answer:	YES ITS PNEUMATIC. RUNSON. APPROX. 110 PDS.

Product features

Makita AN454 1-3/4" Coil Roofing Nailer

The Makita 1-3/4" Roofing Coil Nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a 'tool-less' depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

Product description

The DEWALT DW45RNR (Certified Refurbished) Coil Roofing Nailer is ideal for asphalt shingle roofing applications. This nailer increases your roofing productivity by allowing you to shoot 120 nails before reloading for maximum efficiency. Coil collated nails are compact and easy to load. Its ergonomic design is lightweight for easy handling.

• High speed valve technology drives at a rate of up to 10 nails per second
• Ergonomic design is lighter than leading competitive coil roofing nailers.
• Robust engine and feed system for durability and long life.
• Steel skid plates with rubber inserts protect the tool and help to stop it from sliding.
• Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials.

User questions & answers

Question:	dose it have charger
Answer:	No
Question:	What size compressor is recommended for this device. what psi is needed
Answer:	1 horse power and up and for psi you will need between 9.5-11.5 psi
Question:	How many nails per second
Answer:	They quote up to 10 nails per second, so basically it will keep up with you unless you have superhuman capabilities. I know from experience it shoots faster than I can nail.

Product description

Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2").

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Works with a Variety of Siding Materials, from Soft Wood to Steel

Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use

Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Siding nailer

• Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for added durability. Fastener Diameter .080 .092 Inch
• Soft rubber foot prevents damage to softer woods
• Tool free adjustable exhaust conveniently directs exhaust away from the user
• Ensure using compatible nails to prevent misfires/ensure proper operation.
• NOTE : No carry case is included.

User questions & answers

Question:	Can this gun be used to install azek trim boards
Answer:	No, with standard framing contact arm installed: Uses a 30° paper collated stick nails, in lengths of 2” to 3-1/2” (50-90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm). With metal connector attachment installed: Uses a 30° - 35° paper collated full round head metal connector nails, in lengths of 1-1/2” and 2-1/2” (38 - 64mm) and shank diameters of .131”, .148” and .162”.
Question:	Would this nailer be good for nailing fascia, soffit and exterior trim
Answer:	The only difference I see is about 270$ in price.😊All joking aside, this nailer is a beast. If you go with it I don’t think you will be disappointed.
Question:	can you use this gun on hardie board
Answer:	Yes, this gun will shoot up to a 3 1/4" nails. You will be very pleased with what this gun will handle. Hope it was helpful?
Question:	Will this work on James Hardie trim boards
Answer:	Adjustable depths.."" air..""length of nails.. go for it. If you break through the face back it off a bit and go. Nothing worse than a gun with too little punch. I'd use a smaller head for the trim though..6 penny

Product features

BOSTITCH N66C-1

Features:

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Adjustable exhaust conveniently directs exhaust away

Product description

The RIDGID 15 degree 1-3/4 in. Coil Roofing Nailer is a perfect combination of power, weight and speed. Packed with Fasten Edge Technology an Industry Leading feature set, this nailer can take on any roofing job. This tool is also backed by the Industry Leading Service Agreement meaning free o-rings, free piston stops, free driver blades, for life.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	Is there a case made for this gun
Answer:	Check the settings. 2 different adjustment systems need to be in the correct setting. And make sure your'e using the correct nails.
Question:	Do they make an adapter for vinyl siding to fit this
Answer:	Hi. I have 3” nails that I plan to use. Although, I have not used the nailer yet. As far as I know if they fit in the tray and it closes they should work.
Question:	Will it shot smaller nails
Answer:	This nailer can shoot framing nails collated at 21, 28 and 34 degree. For 21 degree nails, 2'' is the shortest length to use. But for 28 & 34 degree nails, 2'' is not workable, shortest length is 2-3/16''.
Question:	nails for model r175rne where to buy them
Answer:	I wish this were an easier answer. Senco has already come out with the generations of Fusion batteries, and not all are compatible. The newest version sells for $99.95, but includes a charger because not all chargers work with all batteries. The newest set of chargers and batteries are the same as Senco Duraspin Tools. Eventually Senco will sell just the battery along for $99.95, but for now be sure to order the battery and charger. If you have further questions, call Ted at 860-289-6861.

Product description

The HBT HBCN45P is designed for use with 15 degree, 7/8'' To 1-3/4'' Wire Collated roofing nails, it is an ideal tool for roofing, siding installation and wooden box assembly. This air nailer can drive roofing nails fast and hard while its lightweight design prevents user fatigue. The nail gun features an adjustable shingle guide for accurate shingle spacing and steel contact safety with dual carbide inserts for less wear. The selectable trigger makes for easy change between sequential and contact mode. It also features a tool-less adjustable depth control and 360 degree exhaust. This professional-grade tool is perfect for construction workers, roofers and anyone looking for long-lasting performance. Operation pressure: 70-120PSI, magazine capacity: 120pcs.

• Drives 11 gauge full head coil roofing nails ranging from 7/8'' To 1-3/4''
• Selective actuation switch allows for either sequential or contact mode
• Tool-free adjustable depth control helps set nails properly; adjustable shingle guide allows for quick and consistent shingle spacing
• Durable and lightweight magnesium housing helps reduce user fatigue
• Skid-resistant pads/wear guards for safety and tool protection; contact safety With Carbide inserts for less wear and tear

User questions & answers

Question:	Could anyone tell me the specific brand of 1 inch nail that would be compatible
Answer:	The tool was returned because we couldn't find any nail size or brand that would work consistently.
Question:	Does it bump nail/rapid fire
Answer:	It absolutely bump fires/ rapid fire
Question:	Is the npt 1/4 inch and does it shoot wire coulated 1 3)4 roof nails off home Depot shelf
Answer:	Yes it is 1/4" npt. It should shoot any of the 1 3/4 coil roofing nails. I have always used the fast grip brand and have never had an issue.
Question:	Can I use a Bostitch nails it should have quarter 15 degree smooth shank
Answer:	No, that will cause nail gut to jam

Product description

Product Description:

The Senco 445Xp includes all of the specifications that are most important to every roofer: lightweight, quick, easy to load, balanced and durable.

The 445Xp is compatible with a variety of nails, also available on Amazon:

Easy thumbnail (or one finger) movement adjusts the wheel to control depth of drive for consistent and controllable nail set. Similarly, operators can swiftly and easily change to a one-finger, trigger hold to enable continuous drive. Both modes operate smoothly with a quick release that helps to minimize jams.

Convenience is key: the canister holds 120 nails smooth shank, 10mm round head nails in lengths: ¾ ” to 1 ¾” and works with both Senco and alternate brand nails. Side load canister with easy-open design offers quick reload, minimizing any downtime.

It’s rugged build includes a metal wear plate in the nail canister that reduces canister wear and helps improve nail feed. The adjustable shingle guide removes easily, letting you adapt the Roof Pro 445XP to every job. Additionally, it comes with a carry case for easy transport to and from a job site, air tool oil for maintenance and Senco’s 5 year warranty.

The Roof Pro 445XP is compatible with a variety of nails, also available on Amazon:

Item Code: M003106; Length: 1 3/4"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003105; Length: 1 1/2"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M0031041; Length: 1/4"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003103; Length: 1"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003102; Length: 7/8"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003101; Length: 3/4"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

specifications: Air inlet NPT = ¼ inch; Average air consumption (SCFM) is 3.86; capacity is 120 fasteners; fastener collation is angled wire; fastener gauge is 0.12 inches; fastener type: smooth shank roofing Coil nails; trigger type is contact actuation; fitting type is NPT; magazine angle = 15 Degrees; Max. Fastener length is 1-3/4 inches; Minimum Fastener length is 3/4 inches; Operating pressure (PSI) is 70 to 120; operating pressure (bar) is 4.8 to 8.3; pneumatic technology.

• 360 Degree adjustable exhaust
• Drives 11 gauge (.120"), full round head roofing nails 3/4" 1-3/4" smooth shank.
• Tool-free adjustable depth of drive for consistent and controllable nail set
• Adjustable nail canister accommodates entire range of true round-head roofing nails

User questions & answers

Question:	CAn this use siding nails
Answer:	This is built in Taiwan. A Taiwanese company builds the same gun under three different brand names, the Estwing, the NuMax and the Freeman. They are identically featured. I have the Estwing. It came with a nice big storage bag. It nails fine with the 21 degree nails. It is built of magnesium frame which keeps it not so heavy. It has a 60 nail usable clip, but just shove a new one in behind the remaining five and you are ready to go. You need to nail it regularly during the day, keep fairly consistent air supply around 90 lbs. and use an inline filter to keep the crud out of your hoses. Very few jambs other than when air supply was inconsistent. I was able to clear mine but as usual you'll find great help from a local air tool tech very useful. For example my very dependable Makita siding nailer had to be taken apart to clear a badly jammed and bent nail, but no problems since. This Estwing is a replacement for a Taiwanese Craftsman nailer that didn't fail but had the clipped head nail size it used discontinued. The Estwing has a full head nail clip so it is really generic to all nailers. Keep your nails stored in a box so they stay clean and not crudded up from dirt and dust and you should do fine. I liked the little air inlet plastic plug this one uses and it should do fine if kept in that bag they supplied. For the money and a little care this is a great tool!
Question:	Where are the manufactured
Answer:	I contacted the seller. They were very helpful. Ultimately I got a nail gun with a fixed angle, and it is simpler and less prone to jamming.

Product description

AeroPro CN45N is a lightweight and durable roofing nail gun for professional use in most extreme roofing environments. It has a high-capacity, side loading magazine that accepts 120 ¾ to 1-3/4-ich wire collated coil nails with .12-inch diameters. The air inlet is 3/8 inch NPT, and the working air pressure is 70-120 psi.

• Professional grade roofing nail gun designed with moving cylinder engine for low recoil
• Selective actuation switch (sequential or bump)
• Heat treated aluminum hosing designed for extra heavy duty application
• Tool-free precise adjustable drive depth
• Single-action side loading magazine with capacity up to 120 coil nails

User questions & answers

Question:	How fast is this gun comparing to a max
Answer:	Should be a lot faster than other guns like Max. due to its unique double-claw nail feeder design.
Question:	Donde puedo encontrar refacción para este modelo de pistola? necesito ayuda con eso
Answer:	Esta pistola usa las mismas piezas que la hitachi nv45ab a excepción de el empaque de el alimentador de clavos.
Question:	Is this made in U.S.A or is that just a label name
Answer:	It is made in China, just a label name..
Question:	Necesito repuestos de esta pistola los dientes y el resorte
Answer:	No se exactamente que es lo que necesitas pero si es el feder, es la pieza que sube los clavos hacia arriba para ponerlos en el cañón de la pistola y si el resorte que buscas es el de la nariz de la pistola dejame decirte que esa pistola la mayoría de piezas que usa son las mismas que usa la hitachi NV45AB2 a execsion de algunos empaques

Product description

The Porter-Cable RN175C Coil Roofing Nailer is designed with a compact body for better balance and control. This nailer features an adjustable shingle guide and Quick-Set depth of drive that allow accurate and less damaging shingle placement. An over-molded grip and tool-free adjustable exhaust make this nailer more comfortable for extended use.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box