13 best coil nail gun

Product description

Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2").

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Works with a Variety of Siding Materials, from Soft Wood to Steel

Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use

Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Siding nailer

• Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for added durability. Fastener Diameter .080 .092 Inch
• Soft rubber foot prevents damage to softer woods
• Tool free adjustable exhaust conveniently directs exhaust away from the user
• Ensure using compatible nails to prevent misfires/ensure proper operation.
• NOTE : No carry case is included.

User questions & answers

Question:	Can this gun be used to install azek trim boards
Answer:	No, with standard framing contact arm installed: Uses a 30° paper collated stick nails, in lengths of 2” to 3-1/2” (50-90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm). With metal connector attachment installed: Uses a 30° - 35° paper collated full round head metal connector nails, in lengths of 1-1/2” and 2-1/2” (38 - 64mm) and shank diameters of .131”, .148” and .162”.
Question:	Would this nailer be good for nailing fascia, soffit and exterior trim
Answer:	The only difference I see is about 270$ in price.😊All joking aside, this nailer is a beast. If you go with it I don’t think you will be disappointed.
Question:	can you use this gun on hardie board
Answer:	Yes, this gun will shoot up to a 3 1/4" nails. You will be very pleased with what this gun will handle. Hope it was helpful?
Question:	Will this work on James Hardie trim boards
Answer:	Adjustable depths.."" air..""length of nails.. go for it. If you break through the face back it off a bit and go. Nothing worse than a gun with too little punch. I'd use a smaller head for the trim though..6 penny

Product features

BOSTITCH N66C-1

Features:

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Adjustable exhaust conveniently directs exhaust away

Product description

The Framing Nailer NV90AG(S) drives wire collated nails from 1-3/4" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7. 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. The convenient side-load, tilt bottom magazine allows for quick and easy fastener replenishment. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• FASTENERS: Accepts 16° +/- 1 wire coil nails from 1-3/4-in - 3-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• TRIGGER: Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• LIGHTWEIGHT: At only 7.7 lbs, it is easy to use all day

User questions & answers

Question:	can you get a rubber tip for it
Answer:	The tool is 9.95 lbs. with out the battery and 11.37 lbs with the battery.
Question:	What are the minimum and maximum nail diameters for this gun
Answer:	The F-35XP would only be compatible with paper tape collected 30-34 degree nails.
Question:	No trabaja con compresor de aire? Dice electrico
Answer:	The F-35XP drives off-set full round head and clipped head paper tape collated 30 to 34 degree angle framing nails from 2" to 3-1/2" length range.
Question:	Why the name change? Did Hitachi develop a bad reputation or something
Answer:	It can take 30° - 34° paper tape clipped heads

Product description

The Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer is specifically designed for working on cedar shingles, roof and wall sheathing, siding, and fencing, and is compatible with 15 degree 13-14 gauge plastic or wire collated siding nails from 1-1/4" to 2-1/2". The nails load from the side fast and easy for efficiency. The body of the oil-free nail gun is made of lightweight and rugged die cast magnesium, creating a low maintenance tool great for use over extended periods of time. A one piece hardened steel drive blade and an anodized aluminum cylinder add to the durability. The siding nailer's bump fire trigger drives nails with precision and features a safety lock to prevent accidental firing. The convenient tool-free finger depth adjust provides fast and easy control of the depth of the nails, while the comfort grip handle helps reduce fatigue and increases accuracy. A no mar safety tip prevents damaging your working surfaces. This air powered nail gun also contains a 360 degree adjustable exhaust to direct air away from your face, and an air filter / anti-dust cap to keep internal components free from dust and debris. A belt hook, safety goggles, air connector, air tool oil, and adjustment tools are included. The Pneumatic 15 Degree 2-1/2" Coil Siding Nailer will allow you to tackle DIY projects as well as professional jobs. Operating Pressure - 70 – 110 psi. Fastener Diameter: 0.09" – 0.113"

• Nailed It: This pneumatic coil siding fencing nailer features a lightweight and durable magnesium body, ergonomic grip handle, no mar tip, and transparent side load magazine that holds up to 400 wire or plastic coated siding nails for hard-working efficiency.
• Many Applications: This nailer is ideal for cement siding, sheathing, fencing, fiber concrete siding, decking installation, plywood, and OSB. It features depth adjustment, allowing you to customize the firing depth for many different types of projects.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What does this nail gun weigh, unloaded
Answer:	These can cut and strip Romex / NM-B
Question:	Does this shoot .090 nails
Answer:	yes they are
Question:	does anyone know how well does it shoot 11/4 nails into cedar shakes
Answer:	it works
Question:	Will this nailer feed and shoot 1 7/8 aluminum screw shank, plastic collated, Duo-Fast nails
Answer:	Yes, as long as the AWG is between 20 and 30. Most communication wire is AWG 24, 26, so it would work. But, it is up to you to know the AWG of the wire you are using. If you use a hole that is too small in the stripper, you could nick the conductor and that would not be good. It's critical the proper AWG hole is used for the AWG wire.

Product features

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

Product description

Remember when you could re-roof your roof? Nail shingles, insulation boards, waterproof tar paper, fiber cement roofing, siding, vinyl and more with the WEN Pneumatic Coil Roofing Nailer. The versatile magazine holds up to 120 nails at a time, allowing for sizes of 11-gauge (.12 inches) nails ranging from 3/4 of an inch all the way up to 1-3/4 of an inch. Adjust the depth of the fired nails by turning the depth-setting wheel found on the head of the nailer. Clear jammed nails with the quick-release compartment on the side of the magazine. The adjustable shingle guide easily slides up and down the bottom of the magazine to help with quick and easy spacing for shingles of any size. This powerful nailer provides up to 430-inch-pounds of force at a 100 PSI operating pressure, making sure your siding stays in place. The rubber grip handle helps limit fatigue and maximize comfort during long jobs while the turnable exhaust valve on top of the nailer lets users aim the direction of the output air. With a 1/4-inch NPT air inlet, drive fasteners using pneumatic pressure anywhere from 70 to 120 PSI. This package also includes a bottle of oil, three assorted hex wrenches and a convenient blow-mold carrying case for easily transporting your nailer. And, because its a WEN product, your coil roofing nailer comes backed by a one-year warranty and a friendly customer phone line all to make sure you remember WEN.

• Fire 11-gauge nails (.12 inches) anywhere from 3/4 to 1-3/4 of an inch
• Adjustable shingle guide and depth control makes for easy shingle spacing during jobs
• Holds up to 120 nails at a time with a quick release for easily fixing jams
• Uses pneumatic operating pressure anywhere from 70 to 120 PSI
• Includes a blow mold carrying case, oil, and hex wrenches

User questions & answers

Question:	Can this gun be used for siding
Answer:	It will shoot 1 3/4 na ils and they will hold hardi plank siding well
Question:	Can this gun be used for vinyl siding. The nail head has to fall short of full contact with the vinyl
Answer:	Yes. Just turn down the psi on your air compressor outlet till the depth is right. When you hit a stud then tap that nail with a hammer. Or get the crapy vinyl adaptor for the front that sets the depth for you. Bostich makes one.
Question:	what is the weight of this nail gun
Answer:	This gun is F ing HEAVY a little over 11 pounds compared to most other coil nailer that weigh 5 to 7 pounds
Question:	Does this gun take roofing nails made for 15 degree guns
Answer:	Yes, I nailed about 4 square this past summer with 15 degree nails. No problems at all.

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

Product description

The NV65AH2 Coil Siding Nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional siding nailer gets even better. Additional features such as the adjustable air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

• SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
• SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
• NO MAR NOSE CAP: Protects material from accidental marks
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

Product features

No mar nose cap attachment

Protects material from accidental marks.

Tool-less depth of drive adjustment

For optimal depth in a variety of applications.

Selective actuation switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic shield

Deflects wire collation for added safety.

Product description

The HBT HBCN65P coil siding nailer brings power, precision, and convenience to the job site. It accepts 15 degree wire collated and plastic sheet collated coil nails from 1-1/4" to 2-1/2" in length. This lightweight tool features an magnesium housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials. It is widely used for wall sheathing, siding, fencing, exterior trim, and decking installation.

• Drives 1-1/4- Inch to 2-1/2- Inch Plastic or Wire Collated Coil Siding Nails;
• Magnesium housing to provide light comfortable usage as well as promising durability;
• Easy Jam-Release and maintenance due to exposed nose guide when opening magazine;
• Sequential fire or contact fire through a flip of a switch;
• Tool-free depth adjustment sets nails to desired depths quickly and conveniently; 360˚ adjustable exhaust to direct air away from the user; 360˚ swivel air plug minimizes hose twisting for improved control around work area.

User questions & answers

Question:	Do you need a valve adapter for the hbt hbcn65p 15 degree coil siding nailer if using a bostitich compressor
Answer:	They look like they’re made in Japan made really well. Best wire strippers for number 6 wire
Question:	I am not familiare with hbt. what does it stand for? assuming the company that makes it? who are they
Answer:	I am left handed and never had an issue
Question:	What size is the compressor
Answer:	If you watch the video (albeit fast pace), you'ss the knob closer to the top is for adjust the force of stripping (clockwise more force) and the one lower is to adjust the length of strip.
Question:	Will this handle roofing nails
Answer:	This tool was designed for use in the US market.

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

The product is Coil Frame Nailer. Easy to use. The product is manufactured in Taiwan.

A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch's utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn't the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls--the inevitable beating nailers take on a job site. The nailer's aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels--it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not have adjustable drive depth. --Jonathon Tudor

• The product is Coil Frame Nailer
• Easy to use
• The product is manufactured in Taiwan
• Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing
• Contact-trip trigger; large-capacity magazine
• Aluminum housing
• Accomodates nails from 1-1/2 to 3-1/4 inches
• Weighs just 8 pounds; 7-year warranty; made in the Taiwan

User questions & answers

Question:	can someone explain why the canister adjusts up to 4" nails but, it can only handle up to 3 1/4" nails
Answer:	With a noise reduction rating of 21, as compared to the 22 of the popular Peltor TAC 100 model, the RangeGuard offers solid, consistent hearing protection. If you're shooting indoors, using an extremely high caliber weapon, or are surrounded by a significant amount of gunfire, your hearing may be compromised. Outdoor protection is excellent, and under most circumstances you are assured of being fully protected. After over 100 hours of use with the RangeGuard (both indoors and outdoors with a wide variety of firearms), I never experienced any kind of noteworthy shortcomings in the noise reduction of the model. As stated, under some circumstances you may feel the audio coming in a bit louder than you'd like, but the average gun owner will never need a stronger model.
Question:	Can I use it for solid hardwood flooring
Answer:	Yes, very easily. They even amplify sounds and make them easier to hear (but not loud noises like gunshots). They have a microphone on each earpiece so you can easily distinguish where sounds are coming from.
Question:	Is this a good framing nailer
Answer:	They'll only "work" if you turn them off. As someone who actually owns these headphones, no - they will not work for lawn mowers. Unless, of course, you turn them off, in which case you're paying a premium for muffs with a microphone and speakers in them. The headphones pick up all outside noise using two forward-facing microphones so that you can "hear" while you're wearing them. The cutoff circuit only engages when it picks up a sudden, sharp noise - like a gunshot, an air nailer, or a hammer blow. Continuous loud noises such as heavy equipment, power tools, saws, airplanes, etc... do not trigger the cutoff and in many instances can *amplify* the noise.
Question:	Will this fit 1 1/2" or 1 3/4" roofing nails
Answer:	These are teal the others are camo green. That's about it.

• Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails;
• Adjustable shingle guide for quick shingle spacing;
• Integrated side skid pads prevent the tool from sliding off roof when placed on its side;
• High-capacity magazine holds up to 120 coil nails at a time; Tool free adjustable depth of drive for consistent and controllable nail fit; 360° tool-free air exhaust.
• Interchangeable trigger for single shot or bumper fire function.

User questions & answers

Question:	Does this work with hitachi hot dipped galvanized 16 degree nail coils
Answer:	We used the hitachi nails with ours.
Question:	how big of a compressor do you need
Answer:	A small pancake compressor will work you only need 90 psi
Question:	What comes with the gun
Answer:	safety glasses, hex wrenches, oil bottle, manual
Question:	can you rapid fire with it
Answer:	Idk if u could mess with it to make it rapid shoot, but as It comes u have to hit the trigger everytime u shoot the gun

Product features

Product description

The NV83A5 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work. The NV83A5 is like the original NV83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power.

• LIGHTWEIGHT: Only 8.8 lbs (or 9.1 lbs if the rafter hook is installed) lightweight and well balanced for easy maneuverability
• POWER AND SPEED: Cylinder valve drive mechanism provides quick response and rapid, powerful driving
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• APPLICATIONS: For wall sheathing, roof decking, subflooring, packing and crating work, and more
• SELECTIVE ACTUATION: Selectable trigger mode; choose contact or single sequential actuation mode via switch in the trigger
• FASTENERS: Accepts 16° wire coil nails from 2-IN - 3-1/4-IN
• HARDENED CLAW TIP: Resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing

User questions & answers

Question:	Where is this made (country
Answer:	My local Home Depot did not carry Paslode roofing nails. I had read previous reviews stating you could use other brands of roofing nails. My nailer performed flawlessly. The coils were wound too tight to go straight into the gun, so I loosened the coil and inserted them.
Question:	Does this come with a “no mar” tip, if not can I buy one
Answer:	Where do I get the belt hook. And how in the hell can Hitachi consider themselves a premium brand and sell a ladder access tool without one? I'm livid.
Question:	can i shoot nails on concrete or cement blocks ? for furring strips
Answer:	Good morning, We offer a 60 day warranty. After your first 60 days you have a one year from date of purchase directly with Hitachi. Have a great day.
Question:	How long is the warranty
Answer:	I use it for siding facia and soffit. The nails have to be compatable with the gun. Don't have to be Hitachi brand. lots of generic brands out there

Product description

Product Description:

The Senco 445Xp includes all of the specifications that are most important to every roofer: lightweight, quick, easy to load, balanced and durable.

The 445Xp is compatible with a variety of nails, also available on Amazon:

Easy thumbnail (or one finger) movement adjusts the wheel to control depth of drive for consistent and controllable nail set. Similarly, operators can swiftly and easily change to a one-finger, trigger hold to enable continuous drive. Both modes operate smoothly with a quick release that helps to minimize jams.

Convenience is key: the canister holds 120 nails smooth shank, 10mm round head nails in lengths: ¾ ” to 1 ¾” and works with both Senco and alternate brand nails. Side load canister with easy-open design offers quick reload, minimizing any downtime.

It’s rugged build includes a metal wear plate in the nail canister that reduces canister wear and helps improve nail feed. The adjustable shingle guide removes easily, letting you adapt the Roof Pro 445XP to every job. Additionally, it comes with a carry case for easy transport to and from a job site, air tool oil for maintenance and Senco’s 5 year warranty.

The Roof Pro 445XP is compatible with a variety of nails, also available on Amazon:

Item Code: M003106; Length: 1 3/4"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003105; Length: 1 1/2"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M0031041; Length: 1/4"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003103; Length: 1"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003102; Length: 7/8"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

Item Code: M003101; Length: 3/4"; Diameter: 0.12; Head: full round head; galvanized finish; 7200 box count; Plain coating; 15° angled wire Coil collation

specifications: Air inlet NPT = ¼ inch; Average air consumption (SCFM) is 3.86; capacity is 120 fasteners; fastener collation is angled wire; fastener gauge is 0.12 inches; fastener type: smooth shank roofing Coil nails; trigger type is contact actuation; fitting type is NPT; magazine angle = 15 Degrees; Max. Fastener length is 1-3/4 inches; Minimum Fastener length is 3/4 inches; Operating pressure (PSI) is 70 to 120; operating pressure (bar) is 4.8 to 8.3; pneumatic technology.

• 360 Degree adjustable exhaust
• Drives 11 gauge (.120"), full round head roofing nails 3/4" 1-3/4" smooth shank.
• Tool-free adjustable depth of drive for consistent and controllable nail set
• Adjustable nail canister accommodates entire range of true round-head roofing nails

User questions & answers

Question:	CAn this use siding nails
Answer:	This is built in Taiwan. A Taiwanese company builds the same gun under three different brand names, the Estwing, the NuMax and the Freeman. They are identically featured. I have the Estwing. It came with a nice big storage bag. It nails fine with the 21 degree nails. It is built of magnesium frame which keeps it not so heavy. It has a 60 nail usable clip, but just shove a new one in behind the remaining five and you are ready to go. You need to nail it regularly during the day, keep fairly consistent air supply around 90 lbs. and use an inline filter to keep the crud out of your hoses. Very few jambs other than when air supply was inconsistent. I was able to clear mine but as usual you'll find great help from a local air tool tech very useful. For example my very dependable Makita siding nailer had to be taken apart to clear a badly jammed and bent nail, but no problems since. This Estwing is a replacement for a Taiwanese Craftsman nailer that didn't fail but had the clipped head nail size it used discontinued. The Estwing has a full head nail clip so it is really generic to all nailers. Keep your nails stored in a box so they stay clean and not crudded up from dirt and dust and you should do fine. I liked the little air inlet plastic plug this one uses and it should do fine if kept in that bag they supplied. For the money and a little care this is a great tool!
Question:	Where are the manufactured
Answer:	I contacted the seller. They were very helpful. Ultimately I got a nail gun with a fixed angle, and it is simpler and less prone to jamming.

Product description

"The Makita 2-1/2"" Roofing Coil Nailer (AN613) offers rugged construction and robust performance. The AN613 drives 15º wire and plastic collated nails for added convenience. The AN613 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a ""tool-less"" depth adjustment with nine detents settings engineered for more precise control and flush nailing. Additional features include rubber bumpers to protect the tool, smooth nose tip to prevent scratching, a multi-directional exhaust port, and reversable belt hook."

• efficient motor & trigger design offers leading fastening performance
• “tool-less” depth adjustment with 9 detents settings engineered for more precise flush and countersink nailing
• 2-mode selector switch allows operator to select contact or sequential nailing options
• drives 15º wire and plastic collated nails for added convenience
• smooth nose tip prevents scratching
• Power source type: Corded Electric

User questions & answers

Question:	The bullet points to the right of the pic of the nailer says it’s corded electric. Sure looks like an air nailer to me. What gives
Answer:	Hello，the 22 inch is the total end to end.
Question:	does it come with a case
Answer:	You don't need to cut it, you can just leave it 'deployed' or unrolled at a shorter length. Instead of the simple "pull down" spring loaded mechanism, this blind has a plastic 'chain' to the side that you use to raise it up/down. We know this because the first thing we did was pull on the bottom edge of the blind, which only caused it to rip out of the wall. (We now use molly bolts). Hope this helps.