15 best 15 gauge angled finish nailer

Product description

The NT65MA4 15-Gauge Angled Finish Nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The NT65MA4 nailer has a compact body and angled magazine making for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

• 15 Gauge Finish Nailer
• Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required
• Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
• 360-degree fully adjustable exhaust portal directs air exhaust away from the user or work piece
• At only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability

User questions & answers

Question:	will bostich FN type nails work in this gun
Answer:	No, you must use DA-type nails. The good news is that 95% of nail brands are DA-type: Hitachi, Senco, Nail Pro, Fastener USA, and so on.
Question:	Is this similar to Makita nailer and does use other brands of nails
Answer:	Good morning, This tool accepts the following. It doesn't have to be Hitachi nails. Have a wonderful day. It accepts 15-gauge nails from 1-1/4" long to 2-1/2" long.
Question:	Can I purchase a nose cap for this nailer.. mine didn’t come with one
Answer:	Look carefully at your gun. The nose cap is mounted, for transport, on the bottom end of the magazine. It's black, and easy to miss. I returned my first gun, thinking that it was missing the nose cap, as well.....
Question:	Nails for this item
Answer:	Use only DA-type nails (i.e., NOT Bostitch FN-style).

Product features

Selective Actuation Switch

Allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required

Tool-less, Easy to Clear Nose

For quick nail extraction should a nail jam during use

360-degree Fully Adjustable Exhaust Portal

Directs air exhaust away from the user or work piece

Factory Installed Air Fitting

Angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

The Makita 15 gauge angled finish nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. Angled finish nails sized 1-1/4" to 2-1/2". the nail Lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air Duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

• Powerful motor drives 15 gauge "DA" style angled finish nails from 1-1/4" to 2-1/2"
• Magnesium body, aluminum MAGAZINE and cylinder deliver strength and durability
• "Tool-less" depth adjustment for more precise flush and Countersink nailing
• Nail lock-out mechanism protects tool and work surface from dry-fires
• Built-in air duster provides convenient air flow to clear work surface

User questions & answers

Question:	Need to replace nail set
Answer:	Not sure what that means. But don't buy that nail gun! You end up having to set one-third of the nails by hand and that's annoying
Question:	Will this shoot 16 gauge nails too
Answer:	No, it is designed for only 15ga nails
Question:	Anybody has the bare gun weight
Answer:	Specs say 4 lb but it feels much lighter and has great power. Been a loyal Senco finish nailer user for years but this is a much better nail gun especially for the price.
Question:	Are these 34* nails hard to find in say, a big box store??? I cant even find them on Amazon and thats my only concern is not finding the right nails
Answer:	I ordered Senco A302000 15 gauge 2 in. and Senco A302500 15 gauge 2 1/2 in. that work fine. These were recommended by Amazon. Some nail guns are 33 1/3 degree and some are 34 degree. Not much of a difference there.

Product features

Makita AF635 15 Gauge, 2-1/2" Angled Finish Nailer, 34⁰

The Makita 15 Gauge Angled Finish Nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. angled finish nails sized 1-1/4" to 2-1/2". The nail lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

Includes:

3 Year Warranty

Pnewumatics - 3yr. Warranty

Each Makita Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund.

Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited does not apply to Makita Pneumatic Nailer Accessories.

This warranty does not apply where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. Normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The Pneumatic Nailer has been abused, misused, improperly maintained or operated. Improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose,' after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

Metabo HPT (formerly known as Hitachi power tools) offers an extensive line of professional grade power tools and accessories for woodworking, metalworking, drilling and fastening, concrete drilling and cutting, outdoor power equipment products as well as a complete line of pneumatic nailers, staplers, compressors and collated fasteners.

• Package Dimensions: 3.4 cms (L) x 10.3 cms (W) x 26.4 cms (H)
• Package Quantity: 1
• Product Type: Tools
• Country Of Origin: China
• 34 Degree

User questions & answers

Question:	Que ángulo son
Answer:	Son de 34 grados

Product description

Metabo HPT (formerly known as Hitachi power tools) offers an extensive line of professional grade power tools and accessories for woodworking, metalworking, drilling and fastening, concrete drilling and cutting, outdoor power equipment products as well as a complete line of pneumatic nailers, staplers, compressors and collated fasteners.

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• 1-1/4" X 15 gauge galvanized angled finish nails
• For NT65MA4 | NT65GAP9 | NT1865DMA
• 1000 Count

User questions & answers

Question:	Diameter of head
Answer:	15 Gauge is the size of the nail, aka diameter
Question:	are these hot dip galvanized or electrode galvanized
Answer:	Electrogalvanized
Question:	Does this work on the finish nailer
Answer:	Yes it will work. Check your nail gun to see what sizes it will take.
Question:	are these "DA" style
Answer:	If you mean will they work in a finish nailer that will either set one nail with one pull of the trigger or will set a nail each time the nose is pushed against the work piece then yes, they are the DA style

Product description

Power state Brushless motor provides more power, more run time, and longer life. Fully capable of sinking 2-1/2 in. (Inch) nails in solid oak with zero ramp-up time. Red link plus electronic intelligence enables advanced communication between battery and tool, allowing for unmatched levels of performance, protection from overloading and overheating, and productivity. Red lithium battery eliminates the mess and cost of gas cartridges. Additional features include tool-free depth of drive adjustment, LED (light emitting diode) light, dry-fire Lock out, tool free jam release, nail quantity indicator, and non-marring nose pad. Includes M18 Red lithium 2.0 compact battery pack, M18 & M12 Multi-Voltage Charger, adjustable belt clip, contractor bag. The product is manufactured in china.

• Power state Brushless motor provides more power, more run time, and longer life
• The product is manufactured in China
• Fully capable of sinking 2-1/2 in

User questions & answers

Question:	Does the hammer damage or imprint the wood at the site of the nail
Answer:	No Leaves about a 1/8" hole you can set the depth almost same as a senco or any finish nailer, very good gun. If you want a small hole use a brad gun
Question:	gauge nails would work right? Thanks
Answer:	We have only used 15 gauge finish nails, thinking 18 might jam ? We used the 15 gauge Senco nails we had from that nailer. The Milwaukee works great
Question:	What brand nails and type are best used for siding application
Answer:	I've only used it on trim but I'm not sure this tool is the best for siding it's my understanding that siding is installed with screws
Question:	What kind of nails does it take
Answer:	Own this nailer for couple of months now. Great nailer got plenty of power. In regards to your question it uses 15 GAUGE 34 DEGREES 1-1/4" to 2-1/2 ". In my personal experience I used so far Senco DA17EPBN 1-1/2" nails with great success.

Product description

The Senco 15-Gauge Angled Finish Nailer has established itself as a marquee tool for the professional finish carpenter. This tool offers superb durability and superior performance, great for a wide variety of finish and trim applications. Featuring a comfort grip for easy handling, the nailer is crafted with a rugged internal design along with magnesium to make it lightweight yet tough.

Designed for the unique demands of dedicated professional use, the Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer is packed with the powerful, innovative features you need to tackle virtually any job. It features a balanced, ergonomic design and lightweight construction that help minimize wrist and arm fatigue, so you can get more done in less time.

• Anti-lube design eliminates the hassle of maintenance
• Magnesium-coated design resists scratches
• Smooth finish makes it easy to paint
• Rugged internal engine offers lasting durability
• Great tool for professional finish carpenters

User questions & answers

Question:	Does this come with a case
Answer:	No. It uses a build-in battery.
Question:	Metal or plastic body housing
Answer:	Metal push button. Same as the flashlight body.
Question:	Will this dry fire
Answer:	Only at about 6-7 charges.......so I cannot help with this question Maybe someone will be able to answer your question that has had it long enough for 500 charges This is a Great little lite though in my opinion My other lites have to have the batteries removed and put in charger and back in at home,,,,,, where this light is more portable to charge. Thank You and have a great day
Question:	The listing for this gun shows both last year's model in gray, and the new red model. Which do you receive if you order now
Answer:	We aren't able to attach pictures, but there is a velcro strap on the back of the holster that will fit to most belts.

Product description

The DEWALT DWFP72155 15 GA PrecisionPoint™ "DA" Style Angle Finish Nailer drives 15 Gauge DA style nails from 1-1/4 in. to 2-1/2 in. making it ideal for interior trim, baseboards, crown molding and more. With its 16 in. On-center gauge to measure exactly 16 in. from end to nose, and PrecisionPoint™ technology for precise nail placement, this tool is ready to work.

• Precision Point™ Technology: Precise nail placement due to a smaller nose, compared to current DEWALT nailers, and no need to compress the contact trip to actuate the tool
• Long-life, maintenance-free motor helps to keep from staining the work surface
• Tool-free jam release mechanism for easy nail removal
• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	Is the nail recommended for this tool easy to find, is there troble in finding nails for this tool
Answer:	"DA" angled finish nails are 35 degrees.
Question:	Is it a pneumatic tool
Answer:	Yes, because these nails are DA-style (34° angle), just like the Bostitch btfp72155.
Question:	Is the dewalt dwfp72155 15 gauge a 34 degree nailer
Answer:	Traditional Bostitch's FN style (25 degrees) is unique to its brand. However, the newer Bostitch DA style (34 degrees) of finish nailer will work with the corresponding angled finish nails.
Question:	What about recoil
Answer:	I would call a local tool repair shop. Unless you acsess the parts detailed list online at Hitachi website.

Product description

The NF665/15 SuperFinisher is the newest tool MAX has to offer. It shoots 15 Ga. Straight finish nails from 1 1/4" to 2 1/2" in length. The tool has a dial adjustable depth control, no mar tip, easy jam clear door, belt hook, easy twist exhaust deflector, weighs only 3.9lbs., comes with a carrying case and has switchable fire mechanism.

• Lightweight at 3. 9lbs
• Selectable Fire mechanisms
• Easy jam clearance
• Belt hook
• No-mar tip
• Easy twist exhaustible deflector

User questions & answers

Question:	Does this item come in a carry case
Answer:	Yes. The Max NF255F/18 Brad Nailer that I purchased was delivered with a sturdy plastic moulded case. Cheers. Peter.
Question:	Does it oil
Answer:	No
Question:	So the ad says its an angled finish nailer but it shoots straight finish nails. Which is it
Answer:	The gun will not fire unless depressed onto a surface. However, if you run out of nails it will continue to fire . You have to keep your eye on that.

Product description

Users of the Senco Fusion F-15 angled finish nailer will enjoy the convenience of cordless as well as the ability to fire off a shot immediately, without waiting on ramp-up. This cordless model of finish nail saves the user money, since the need for fuel cells is no more. Instead, this powerful nailer runs on Senco 18V Li-Ion battery models VB0155 and VB0161 (sold separately) to deliver long-lasting, fade-free power on a number of jobs. The F-15 is perfect for professionals in a number of applications, including finish and woodworking, cabinetry, paneling, and casing. Other features of the Senco Fusion F-15 are its tool-free thumbwheel depth-of-drive, its nose-mounted LED light for accuracy, and EZ-clear feature for the occasional jam. This finish nailer accepts 15 gauge 34° angled strip finish nails with a range of 1” to 2-1/2” long. This is a bare tool. It does NOT come with a battery, charger, or case.

• Features a Thumbwheel Depth-of-Drive
• Powered by Senco Battery Models VB0155 and VB0161 (Not Included)
• Nose-Mounted LED Light Provides Illumination in Low light Work Areas
• Compatible with 15 Gauge 34 Degree Angled Strip Finish Nails
• Included: Senco Fusion F-15 18V Angled Finish Nailer (Tool Only - Battery and Charger NOT Included)

Product description

Similar to the Senco DA25

• 2-1/2" x 15 Gauge Angled Finish Nails for use with Senco Nailers
• Type 304 Stainless Steel
• 35 Degree Tape Collated
• Perfect for Trim Work and Cabinetry
• 1000 count box

User questions & answers

Question:	Where are they made
Answer:	China.
Question:	how do i repair16 g angled nailer nails will not feed after I cleared bent nail
Answer:	With the front of the nailer removed, does the stick slide out easily? Is the stick bent? Does a previously unused stick slide easily?
Question:	Will these work with the ridgid r250afe 2½" 15-gauge 34 degree angled finish nailer
Answer:	Yes, if your nailer takes SENCO DA25 style nails, then it will work fine.
Question:	Can I use Paslode 16 gauge nails in the 15gauge gun
Answer:	No, the angle and gauge are different. Search for "NailPro Stainless Steel 2-1/2" Angled Finish Nails for Paslode -2,000 pieces - 16 Gauge - 20 Degree Tape Collated - Smooth Shank - Brad Head" for the correct nail.

Product description

SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool. DRIVES: 15 GA "FN" Style Angled Finish Nails from 1-1/4" to 2-1/2" length. TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal.DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails. KIT INCLUDES: Nailer, 1/4" Air Fitting, Carrying Case and Extra No-Mar Tips.

• SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool.
• DRIVES: 15 GA "FN inches Style Angled Finish Nails from 1 1/4 inch to 2 1/2 inch length.
• TOOL FREE JAM RELEASE MECHANISM: For easy nail removal.
• DIAL A DEPTH(TM) CONTROL: For precise countersinking of nails. Magazine Capacity 129
• KIT INCLUDES: Nailer, 1/4 inch Air Fitting, Carrying Case and Extra No Mar Tips.

User questions & answers

Question:	Is this nailer (btfp72156) electric or pneumatic? description is vague
Answer:	We are building an entertainment center with select pine and polar and have no issues at all.
Question:	Where do I buy no mar tips
Answer:	1.3 ah
Question:	Is this good to nail door trim and baseboards
Answer:	Only 18 gauge finish nails 5/8 to 2"
Question:	Why does the description say it comes with air fitting, and also says corded electric
Answer:	No it can not. 18ga brad nails only, from 5/8" to 2". The Ryobi P318 is their 23ga pin nailer. That tool does 1/2"-2" pins.

Product description

2" x 15 Gauge Angled Finish Nails - to fit Senco Nailers - 1000 pc. pack - Type 304 Stainless Steel - Similar to Senco DA21

• 2" stainless steel nails (304SS)
• 1,000 nails per box 12 boxes per case
• Fits in Senco Finishpro 42XP, Fusion FN65DA, SFN30
• and all DA nailers nade by Hitachi, Makita, MAX, PorterCable, etc.

User questions & answers

Question:	Will these nails fit a DeWalt 34 degree finish nailer
Answer:	Neither type they are electro galvanized and only 2" long. Don't waste your money on these. Innacurate description. I got burned. Not a trustworthy seller too much hassle to return.
Question:	What angle/degree are these nails
Answer:	Hello, we think 40 watts is the most suitable brightness for this chandelier, so the product displayed is 40 watts. But this product can install a maximum of 60 watt bulbs. If you like a brighter feel, you can install a 60-watt light bulb, don’t worry.
Question:	Will these work in a bostitch smart point 15-ga da-style nailer, model btfp
Answer:	We use an General Electric 5060 lumens Edison type bulb 6 wt equivalent to 60 wt. got them at Lowe’s. They put out plenty of light. Hope this helps
Question:	I have a Bostitch 15da 34deg finish nail gun. Why are people saying this don't work for Bostitch
Answer:	Hello. They are metal tubes which wires can pass. it comes with three so you can adjust the height when hanging.

Product description

The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Tool-free selectable trigger for sequential or contact actuation modes
• Tool-free jam release to quickly and easily clear nail jams
• Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
• Ideal for fastening crown molding, door & window casings, and baseboards
• Use 16 Gauge angled finish nails from 1-1/4″ to 2-1/2″ for maximum performance on the unit

User questions & answers

Question:	Can it set nails in hardwood
Answer:	About 8ft long.
Question:	Do nails go in straight, or do they penetrate at an angle? Hence, the name angled finished nailer
Answer:	Yes it will! Cheers, Beverage Factory Customer Support
Question:	Have anyone use 16ga. paslode nail to this dewalt? it's 20 degrees angle,i wonder if it fits before i buy it, gun down lot of nails leftover
Answer:	Hello, The top opens and if your arms are the right size and length you can reach all of the interior, something like a carboy brush is needed if you have large diameter or short arms. I recommend pressurizing and pushing both cleaning and sanitizing solution through the output to make sure your dip tube is clean. Anthony The Beverage Factory
Question:	baretool only? or comes with battery and charger
Answer:	Hello, Thank you for your question. The dip tube will already be inside the tank. Best wishes, Kaylyn Beverage Factory 800.710.9939

Product description

The 16-Gauge Finish Nailer NT65M2S features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2S accepts 16-gauge finish nails in lengths ranging from 1" Up to 2-1/2" And is equipped with Metabo HPT signature air Duster button to conveniently blow away dust and debris instantly to clear the work surface.

• FASTENERS: 16-gauge finish nails in lengths ranging from 1-in up to 2-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 3.7 lbs and well-balanced for minimal fatigue and increased maneuverability
• DEPTH ADJUSTMENT: Tool-free depth of drive adjustment helps to provide a professional finish when fastening into varying materials
• APPLICATIONS: Ideal for installing molding, chair rail, cabinetry and other fine finish applications
• EXHAUST PORT: 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use

User questions & answers

Question:	what all comes in the box
Answer:	2 inch
Question:	Benden refacciones de esa pistola
Answer:	I use 16 gauge finishing nails! I’ve used nails from 1” inch up to 2” nails. Had this tool for a year and love it! I use dewalt brand, but other brands will work! The gun will specify what gauge such as 16 in this case!
Question:	Is the no-mar tip removable where the no-mar tips is not needed for work other than finish work
Answer:	Yes in the first 30 days. Other than that no warranty
Question:	What type of air compressor should I buy to use with this
Answer:	This is more than a brad nailer. It does 16 ga finishing nails up to 2-1/2 inch in length. I used it for nailing the baseboard in my house.

Product features

Tool-less, Easy-to-Clear Nose

For quick and simple nail extraction should a nail jam during use

360 Degree, Fully Adjustable Exhaust Port

Directs air exhaust away from the user during use

Ergonomically Designed Simple Flip Actuation Switch

For easy transitions between bump fire or sequential fire modes

Factory Installed Air Fitting

Is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece