14 best paslode brad nailers

Product description

When you need precision in tight spaces, reach for the Paslode 18 Ga. Cordless Li-ion Brad Nailing system. At 4.25 lbs., this is the lightest Cordless Brad Nailer on the market. Designed for fine trim applications, it leaves only a small hole in detailed trim work. This cordless nailer gives you great maneuverability to place the nail exactly where you want it wherever you're working: overhead, on ladders, or on your knees. Our cordless nailer, brad nails, and fuel cell are designed to work together so you can fasten with precision, finish without fatigue

• Easy Access - Provides superior access by reaching directly into tighter spaces.
• Consistent - Drives each nail flush into all trim for high-quality craftsmanship.
• Lightweight - The lightest Cordless Brad Nailer on the market for reduced fatigue and increased productivity.
• No Downtime - Paslode provides non-stop nailing with fuel that will last a full day.
• Durable - 7.4-Volt Li-ion battery drives up to 12,000 nails per charge; 1-1/2-hour full charge; 2-minute quick charge for up to 200 extra shots.

User questions & answers

Question:	Does it come with 2 batteries
Answer:	Yes it is, it just unscrews. If your going to bore into something that needs the power this drill has that handle might keep you fromgetting injured, boy this thing really has power. If you put it in a bind something is going to give. Great drill used one for 25 years.
Question:	Does this use staples too
Answer:	I bought one a couple months ago and it was made in Japan. It is a really nice drill lots of power, smooth, and quiet. I think you will be very happy with it.
Question:	Can this shoot a 3" pin nail
Answer:	No its a rocker trigger forward & reverse with no trigger lock
Question:	Does it take the same battery as the 16 gauge
Answer:	I don't know the torque in numbers. You have to really have a strong grip on the extended handle and good stance with your feet. If the drill bit hits some tough going it will pull loose from your hand if you don't. If you don't have a good stance with your feet it will twist your body so much you will lose your balance. Very powerful drill.

Product description

PASLODE 18 gal Cordless Li-I

• Accurately place every nail with open line of sight
• 4.6 Lbs. - Lightest cordless brad mailer
• 7V Li-ion battery drives up to 12,000 mailer per charge
• 1-1/2 Hour Full Charge; 2 - minute quick charge for up to 200 extra shots
• Drives into harder woods with total accuracy

User questions & answers

Question:	Weight? 4.6 or
Answer:	april 2017
Question:	How many brad nails does it hold
Answer:	Per Paslode, this fuel cell works in all Paslode Cordless Framing Nailers.
Question:	what is the color of the paslode 918000 nail gun
Answer:	Yes, it comes with an adaptor for the older IMCT tools
Question:	Can i use any brand of brad nails or only paslode brads
Answer:	A single rechargeable lithium-ion battery is included.

Product description

Paslode Universal Trim Fuel gives you the power to drive up to 1,000 nails. Each Paslode short yellow trim fuel 2-pack comes with two types of adapter heads to meet the needs of ALL Paslode finish nailers.

• Quick And Easy Load - Provides non-stop nailing for up to 1,000 nails; load and go.
• Broad Use - Two types of adapter heads meet the needs of ALL Paslode Cordless Finish and Brad nailers
• Excellent Performance - Provides a precise fuel dose for reliable drive performance.
• Sufficient Oil Supply - Paslode fuel contains lubricating oil - no need to add oil except when cleaning per Paslode instructions
• 24 Month Fuel Life - Use before the expiration date on the bottom of the fuel cell for the best performance.

User questions & answers

Question:	do you ship to the UK as i can not get the quicklode fuel cells in UK
Answer:	no
Question:	Will these cells work in a paslode cr175c roofing nailer
Answer:	no
Question:	does it work with Hitachi NC40G
Answer:	This nailer requires and includes a 7.4-Volt Li-ion battery.
Question:	Has anyone else received this product without the old type adapters? mine were missing
Answer:	not sure china probably but quality is excellent still better than milwauke or dewalt aad I have bot other brands as well have old 20 years and brand new they work the same so far no problems my use is heavy professional semi truck bulding houseboat boat welding and metal crafting machining commercial heavy use farm I DO NOT LET second party except my son to use my tools that's whant I thing makes difference with any tool

Product description

When you need precision in tight spaces, reach for the lightweight Paslode 16 Ga Straight Cordless Finish Nailing System. It is designed to fit in tight spaces to place the nail exactly where you want wherever you're working: overhead, on ladders, or on your knees. Our cordless nailer, finish nails, and fuel cell are designed to work together so you get the powerful precision you need to finish the job right the first time.

• Powerful Precision - Nails with powerful precision for crown molding and other surfaces.
• No Downtime - Paslode provides non-stop nailing with fuel that will last a full day.
• Lightweight Tool - Only 4.6 lbs. for added comfort and control.
• No Mar Tip - Preserves smooth surface and prevents scratching and markings on work surfaces.
• Reliable Power - 7.4V Li-ion battery drives up to 12,000 nails per charge, including 16 ga 1-1/4-in to 2-1/2-in length straight finish nails into hardwood.

User questions & answers

Question:	Is there any warranty
Answer:	I don't remember if it had a case or not. It just sits on a shelf until I use it. Every other Makita I have bought has had a case. But this one I don't seem to have a case. As far as the drill goes, it is one of the best ones I have had in the past 45 years. Plenty of power and the chuck works good and is true. I would buy no other if I needed another. I have used many drills that the chuck holds the bits a fraction off to one side. They are a pain to use. This Makita is the best.
Question:	does it include battery, charger, and case
Answer:	Mine didn’t come with a case but the description didn’t say that it did. I wasn’t needing a case.
Question:	To be clear what all comes with the gun
Answer:	per tag on drill it is 7 amp. It will still hurt your wrist.
Question:	Can this be used for boxcarsiding
Answer:	2 prong

Product description

The Paslode 16-Gauge. Pneumatic Finish Nailer has a best in class design that allows for comfort in all applications. This is a reliable and durable tool you can trust to keep up with you. The oil-free design allows for long term, maintenance-free operation which reduces cleanup time and associated costs. Experience non-stop nailing with Paslode trim nails.

• Powerful Precision - Nails with powerful precision for hardwoods, crown molding, and other finish applications.
• Convenient Design - Flared out trigger allows for 2 finger placement to assist the index reach and handle can be fully gripped for improved comfort and balance.
• Low Maintenance - Oil-free design allows for a long term maintenance-free operation which reduces cleanup time and associated costs.
• Best In Class Ergonomics - Designed with enhanced features to optimize balance, maximize comfort, reduce fatigue and increase productivity.
• Consistent Nailing - Each time the trigger is pulled, the nail drives flush into the trim.

User questions & answers

Question:	Can this bump fire
Answer:	Yes
Question:	Do they sell just the drive pin replacement
Answer:	I'm sure they do. Look it up with the model number added.
Question:	I don't see what length of nails this gun can use. Anyone know
Answer:	The nail range for this pneumatic finish nailer is 1" - 2-1/2".
Question:	USA made
Answer:	This tool is made in Taiwan.

Product description

Paslode 901048 Probe Tip (Im200-F18)

• Paslode 901048 Probe Tip (Im200-F18)

User questions & answers

Question:	Is it a pack of
Answer:	The nailer is about 13" tall. I checked and easily fits between studs. It is a great nail gun.

Product description

When you need precision in tight spaces, reach for the lightweight Paslode 16 Ga Angled Cordless Li-ion Finish Nailing System. A versatile nailer designed for trim applications, this cordless nailer gives you great maneuverability to place the nail exactly where you want it, wherever you're working: overhead, on ladders, or on your knees. The Finish Nailer fits in tight spaces so nailing crown molding or baseboard in the corners becomes a breeze. Our cordless nailer, finish nails, and fuel cell is designed to work together so you can experience non-stop accuracy

• Precise Nail Placement - Angled magazine reaches tight spots and allows precise nail placement, crown molding or baseboard in the corners.
• No Downtime - 7V Li-ion battery and up to 12,000 nails per charge lessens downtime and provide fuel that will last a full day.
• Lightweight - Only 4.5 lbs. for added comfort and control.
• Convenient Maneuvering - Cordless design and no hoses make work easier.
• No Mar Tip - Preserves smooth surface and prevents scratching and markings on work surfaces.

User questions & answers

Question:	What model is it
Answer:	This is Paslode model 902400.
Question:	How many batteries does it come with
Answer:	It comes with one battery. But that one battery will last for a few days of constant use.
Question:	Does the Paslode 902400 Cordless 16 gauge Angled Lithium Ion Finish Nailer come with a protective carrying case
Answer:	The case is an exceptionally made case but does not come close to the quality of this tool. Both make it an great value.
Question:	does it come with a battery charger
Answer:	Yes, these include the battery and charger. Your choice of nails and yellow trim fuel will need to be purchased separately. This is a great tool!

Product description

Help prevent marring and damage to expensive woods with the No-Mar Tips for Passcode Cordless 16-gauge Angled Finish Mailers (3-Pack). These tips feature durable plastic construction. Includes sight lines for proper nail placement.

• Use with Paslode cordless 16-gauge angled finish nailer #900600
• Prevents marring and damage to expensive woods
• Provides easy access to confined areas
• Plastic construction is durable

User questions & answers

Question:	Will these fit the cordless 900600 16ga angled finish nailer older one
Answer:	No these only work with the Paslode finish and trim nailers
Question:	Do these fit the 18g nailer
Answer:	Don’t know. As never tried it with hitachi
Question:	Which tips fit my 902400 paslode angled finish nailer
Answer:	The red adapters that came with the cells fit perfect in place of the original black ones
Question:	Will these fit the straight finish nailer
Answer:	yes 30 day from paslode

Product description

The cordless XP framing nailer system is designed to deliver 15% more power to increase productivity. Less standing nails and better drive performance into harder woods means you can put your hammer away and let this cordless nailer do it all. Plus, the new Paslode framing fuel with all season formula lets you keep working in temperatures down to 14⁰F when compressor hoses are freezing. The lightweight Paslode cordless XP framing system offers the nailer, nails, and fuel so you enjoy the power to drive non-stop nailing all day, every day.

• Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
• All Season Formula - Works in temperatures down to 14°F.
• Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
• Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
• Compact Design: Fits between 16" o.c. studs, joists and roof trusses.

User questions & answers

Question:	Dumb question: is the charger included (no mention specifically of same
Answer:	This framing nail does not work with plastic collated nails. This model requires clip head or offset round paper collated nails. If you need the one that uses round head plastic collated nails, you will need model NR1890DR or NR1890DRS.
Question:	What gas cart is used
Answer:	This tool is not made in the USA.
Question:	is the nails for this gas nails the same as the air nailer? i will be using both together
Answer:	First, a reminder that this version of the nailer is only made to shoot papertape nails, 30-34 degree. If the nails you have are trul plastic collated them they are 21 degree and will cause damage. After making sure you have put in the correct nails, there are two buttons right by the bottom of your hand when holding the tool. One is on/off, and the other changes from sequential mode to bump mode. Press and hold the on button till a green light comes on, then operate.
Question:	What is the largest length nail that can be used with this gun? I'll be doing some floor plates in a remote location, so probably need at least
Answer:	In most cases you shouldn't have any problems with this.

Product description

Paslode 901048 Tip Probe (IM200-F18) No-Mar Tip to be used with Paslode Cordless 18 gauge Finish Nailer 901000

User questions & answers

Question:	Do these fit the paslode t200 f18. also need 50097 deflector. dou you have it? thank you
Answer:	Adjusters are oka

Product description

ORDLESS FINISHING SYSTEM NAILER WHEN YOU NEED PRECISION IN TIGHT SPACES, REACH FOR THE LIGHTWEIGHT PASLODE CORDLESS FINISHING NAILING SYSTEM. It gives great maneuverability to place the nail exactly where you want it wherever you’re working: overhead, on ladders or on your knees. Our portable finish nailer, finish nails and fuel cells are designed to work in tandem so you get the job done right, right away. Non-stop accuracy. Fits in tight spaces. Precise placement, superior maneuverability for beautiful results. 7.4V Li-ion Battery – provides 50% longer run time (up to 6,000 nails per charge) than NiCd battery 1-hour Rapid Charger: 2 Min. Charge = 200 Shots Lightweight – only 4.5 lbs for added comfort and control 2-Position Battery Lock – secures battery in “off” position to conserve run-time Lightweight, yet durable, for more comfort and control Tool-free depth-of-drive nail adjustment No-mar tip protects premium wood Swivel belt hook – easily adjusts and keeps both hands free with tool always at your side Nail lockout prevents blank driving Includes: 16 Ga Angled Li-ion Cordless Finish Nailer, Model IM250A-Li Rechargeable 7.4V Li-ion battery Li-ion battery charger Rugged carrying case Owner’s manual Safety glasses 5/32″ hex wrench Fuel: Use with Paslode Universal Trim Fuel Nails: Use with Paslode Angled Trim Nails

• paslode cordless 16 ga finish nailer

User questions & answers

Question:	What sizes of nails will fit
Answer:	There is other hooks that are you can use
Question:	What do you get with this
Answer:	Any size. It’s the connector fitting that makes the difference. Mine works fine on a 3/8 hose.
Question:	What’s supplied
Answer:	Good morning, This item comes with Safety Glasses. Have a great day.

Product description

Hitachi NT50GS 18-Gauge 2-Inch Cordless Gas Powered Straight Finish Nailer

From the Manufacturer

The Hitachi NT50GS 18-Gauge 2-Inch Cordless Gas Powered Straight Finish Nailer may be used in a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim. This nailer fires nails from 5/8-inch to 2-inch in length and powered by a gas fuel rod and Lithium-Ion battery, allowing the user to easily move around without hoses or compressors. The fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle and the double lock fuel compartment will latch securely and keep the fuel rod seated firmly. This nailer is will fire up to 2,000 fasteners per charge. Designed to be compact, the NT50GS weighs only 4-pounds for optimal balance, ease of maneuverability and reduces user fatigue. The tool features an elastomer grip to provide comfort and a secure grip, a quick clear nose with tool-less jam release to reduce down time, tool-less depth adjustment for flush drives into a variety of surfaces and a reload indicator for easy visual recognition of low nail quantities to avoid dry firing. The variable position hook will accommodate either left or right handed users and the low battery indicator light alerts the user of battery status to prevent unexpected downtime. Included with the NT50GS are 3.6-volt Lithium-Ion batteries, 1-hour charger with AC/DC adapter (both car and wall charger adapter), carrying case, a 4mm and 3mm hex bar wrench, no-mar tip and safety glasses. The Hitachi NT50GS 18-Gauge 2-Inch Cordless Gas Powered Straight Finish Nailer is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 1-year from the original purchase date. Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

• Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
• Compact and lightweight for optimal balance, ease of maneuverability and less user fatigue
• Quick clear nose with tool-less jam release reduces down time
• Tool-less depth adjustment for flush drives into a variety of surfaces
• Reload Indicator for easy visual recognition of low nail quantities to avoid dry firing
• Comes with a 1-year limited warranty
• Compact and Lightweight for optimal balance, ease of maneuverability and less user fatigue

User questions & answers

Question:	where do you purchase gas cartridges
Answer:	Homedepot, paslode short gas cartridge
Question:	Is this a bare tool, or does it come with batteries (and charger?)? Descriptino indicates both
Answer:	Mine came with one battery and charger but I also have the angled one and that came with two just a tip you can use any named co2 but make sure that the nails you use have you model I just order the Hitachi nail but very important to use the right gage nail and your model number nail ive have for a year and I oil it be for every use ans never had a jam yet I love them great tool
Question:	How do you turn it off!!!! Do you have to take the battery completely out
Answer:	Yes you should store the batteries just like it was when you received it it the battery storage slots in the case
Question:	Where do I get the nails
Answer:	I have that same gun. I am not too happy with it. Jams. A lot. Anyway you can get (18 gauge ) nails anywhere from home d. To lowes etc. make sure they are 18 gauge and I believe that gun only will except up to 2"or 2-1/2" size nails . When you buy the cylinders ( gas ) look carefully at the base for the exp. date cause it can and will become a problem

Product description

Paslode PowerMaster Plus framing nailer system will allow you to have the job done in no time. Heavy-duty jobs require a heavy-duty nailer with a powerful performance in a lightweight design. That's why the pros turn to the proven performance, durability and driving power only a Paslode pneumatic framing nailer can provide. This low-recoil nailer offers a center of gravity close to the trigger for great balance and less arm fatigue. When used with Paslode framing nails, this nailing system's heavy-duty power can frame walls faster, helping get jobs done on time, every time.

The Paslode F-350S PowerMaster Plus 30-Degree Framing Nailer is a reliable workhorse that no jobsite should be without. Offering an unmatched combination of power, comfort, and durability, this heavy-duty pneumatic nailer is the perfect tool for framers, general contractors, custom homebuilders, and remodelers. Delivering more than 10% more power-per-pound than the competition, the PowerMaster Plus easily drives nails through engineered lumber, so it will make short work of everything from framing and sheathing to fence and deck construction.

The F-350S PowerMaster Plus 30-Degree Framing Nailer At a Glance: Drives 2" to 3-1/2" 30-degree nails into tough lumber Compact size fits between 16" studs, joists, and rafters On-tool depth of drive adjustment Balanced for premium performance 1-year limited warranty on housing and cap parts

Center of gravity is close to the trigger for optimal balance.

Compact size easily fits between 16" joists, rafters, and on-center studs.

Professional-Grade Tool Simplifies Framing Jobs

Ideal for professional framing work, the PowerMaster Plus drives 2" to 3-1/2" 30-degree clipped and full-head papertape nails with .113" - .131" diameters in engineered lumber, so you can handle decking, sub-assembly blocking, sheathing, and trussing of all types. And when you're tackling a big job, you'll be grateful for the PowerMaster Plus's high-capacity one-piece aluminum magazine, which holds up to 84 nails (two strips).

Sequential Operation for Greater Efficiency

With the PowerMaster Plus you can choose either manual or sequential operation and drive up to 12 nails per second--the barrel-shaped nose will ensure an easy line of sight when nailing. To keep things simple, a durable work contact element adjusts on the tool--not the compressor--for precise depth of drive, so you'll be sure to get the right depth for the job. To top it off, the contact element is specially designed to securely grip wood during toenailing.

Big Power in a Compact Package

Weighing just 8.4 pounds and operating at 80-120 psi (5.5-8.3 bar), the PowerMaster Plus delivers over 10% more power per pound than the competition. Offering all the muscle you need to drive through engineered lumber. This tool is surprisingly easy to handle.

To save you time and energy, the PowerMaster Plus features an ergonomic design that places the center of gravity close to the trigger, providing optimal balance and the lowest recoil of a tool of its size. And with a soft-grip handle, it's comfortable to hold, even during all-day jobs.

Incredibly compact, the PowerMaster Plus has a height of just 13.3", so it will easily fit between 16" joists, rafters, and on-center studs. A rafter hook--which is located on the magazine and can be moved out of the way when it's not needed--makes it easy to hang the PowerMaster Plus on your tool belt, ladder, or rafter.

For further ease of use, this pneumatic nailer features an adjustable air-deflector cap and a main valve that improves airflow and performance over a wide range of operating conditions. A bolt-on-end plug makes for quick service and secure compressor attachments.

The PowerMaster Plus is backed by a 90-day limited warranty on wear parts, a six-month limited warranty on magazine parts, and a one-year limited warranty on housing and cap parts.

About Paslode: Providing Professionals with Innovative Solutions

With more than 70 years of experience, Paslode provides the standard by which other pneumatic and cordless fastening systems are measured. With its goal to provide professional users with high-quality fasteners and fastening tools, Paslode has achieved many industry firsts and innovations, including powerful tools that drive through the toughest woods--even LVL--and fuel-cell batteries that save time and energy.

What's in the Box

Nailer; bump fire trigger; reducing bushing; hex wrench (on tool); safety glasses; and owner' s manual.

From the Manufacturer

Paslode F-350S PowerMaster Plus™ Framing Nailer #501000 drives both Clipped Head nails (2" - 3 1/2") and RounDrive nails (2" - 3 1/4"). The Paslode PowerMaster Plus™ tool offers all the power needed to drive into engineered lumber, yet is still comfortable to use. Features of the Paslode PowerMaster Plus™ include the Overmolded Grip, for increased durability and user comfort, the Rafter Hook, making it easy to hang the nailer on a tool belt or on a wood structure and a Ruler on the magazine, allowing for quick measurements without using a tape. The Paslode PowerMaster Plus™ offers an Adjustable Work Contacting Element, a Depth of Drive adjustment on the tool rather than at the compressor saving time and energy. The rugged design of the Paslode PowerMaster Plus™ has stood up to job site and lab testing in heat, humidity and freezing temperatures while the ergonomic design places the center of gravity closer to the trigger, providing better balance and offers the lowest recoil for a tool of its size. Use the Paslode PowerMaster Plus™ tool for: Framing, Wall Sheathing, Roof Sheathing, Floor Decking, Blocking Sub-Assemblies.

• Great Maneuvering - Low-recoil offers a center of gravity close to the trigger for great balance and less arm fatigue.
• Powerful Performance - Heavy duty power helps frame walls faster - drives nails into the hardest woods, even LVL. Works with fewer jams or misfires.
• Compact - Its size fits between 16" o.c. studs, joists, and rafters.
• Convenient Design - Soft grip handle provides comfort and rafter hook moves out of the way when not in need.
• Versatile Application - The Paslode F350S framing nailer is great for framing, wall sheathing, roof sheathing, floor decking and more.

User questions & answers

Question:	I understand this does not come with any air fittings, so what are people using? 1/4" fittings with 3/8" hoses or 3/8" fittings with 1/2" hoses
Answer:	This comes with s reducer bushing which I used and am using 1/4" fitting and 1/4" hose without any issues.
Question:	Is any of the paslode make for plastic collated nails
Answer:	No. All paper.
Question:	Nail gun misfires why
Answer:	When you load nails into the magazine, don't let the magazine slide ram into the nails. It seems a lot of people think it is ok to release the slide at the bottom without guiding it with there hand. The speed and momentum of the slide, unattended will crush the paper back between the nails and cause misalignment when it reaches the firing mechanism. Which results in many misfires. Straight nail magazines will misfire much less.
Question:	Can this be used for baseboards or doing cabinets
Answer:	The smallest nail is 2" x .113 -- definitely not for cabinets or any finish work.....

Product description

The NT50A5 2" 18-Gauge Pro Brad Nailer has been designed with the professional carpenter in mind. It is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8" in length up to 2". The newly redesigned high-grade aluminum magazine not only provides exceptional durability, but also prevents jams caused by fastener overlap. The integrate air duster is convenient, allowing the user to quickly clear away any dust or debris from their work surface. Automatic dry-fire lock-out protects the work piece by not allowing the tool to operate if there are no brad nails in the magazine. The left or right side mountable belt hook helps keep the tool on hand at all times. AWARDS: The preferred Pro brand of Pneumatic nailers. Based on the 2014, 2015, 2016, 2017, 2018 & 2019 product brand surveys in Builder & Developer Magazine.

• INCLUDES: NT50A5 Brad Nailer, Tool Bag, Safety Glasses, No Mar Tip
• BRAD NAILER: Professional 18-gauge nailer who requires precision, power and performance
• APPLICATION: Ideal for trim work, furniture building and other finish applications
• FASTENERS: Accepts 5/8-in up to 2-in 18-gauge pro brad nails
• DEPTH ADJUSTMENT: Tool-less depth adjustment
• MAGAZINE: High grade aluminum Magazine provides exceptional durability and protects against jams
• AIR DUSTER: Integrate air duster to keep surface clean

User questions & answers

Question:	Why is this brad nailer (nt50a5) so much more expensive ($200) than the other model (nt50ae2) that costs
Answer:	It will have higher performance if it could be wet by sharpening oil or submerged by water for few second.
Question:	Do they sell a hard case for this
Answer:	Grits: 320 grit in blue color and 480 grit in white color. The grit had been stated in the bullet points. Please refer to the description.
Question:	Do you sell replacement no mar tips
Answer:	It depends on the blade's condition. if your blade is serious damaged or damaged, you should select the lower grit, from 120 to 240 grit to sharpen the blade firstly, and then use higher grit, i.e., from 280 grit (but likely 320 grit will be better) to 480 grit, to remove the burr generated during the sharpening. if your axe blade is dull only, it is preferable to select higher grit, like 240 grit to 320 grit to sharpen the blade, remove the dull firstly and then polish the blade with a higher grit, like 400 or 480 or higher, to remove the burr generated.
Question:	oiless motor
Answer:	It is a liner-lock style lock for the blade similar to other knives. When yoy open the blade, there is a small piece of metal that pops in place to keep the blade in position. It is easily pushed back to the "unlock" position with your thumb

Product features

High Grade Aluminum Magazine

Exceptional durability and accepts 5/8" up to 2" 18-gauge pro brad nails

Ambidextrous Belt Hook

Can be mounted on left or right side of tool for user preference

DEPTH ADJUSTMENT

Tool-less depth of drive adjustment

Integrated Air Duster

Which is easily thumb operated to clear away dust and debris