14 best new nail guns

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge Flooring Stapler and Nailer is designed for the installation of tongue and groove hardwood flooring. This air powered flooring nail gun and stapler is compatible with 16 gauge T-cleats and L-cleats and 15.5 gauge 1/2" crown staples from 1-1/2" to 2" for all three types of fasteners. Two interchangeable no mar base plates allow you to install 1/2" to 3/4" flooring while protecting finished flooring surfaces, ensuring professional results for DIYers tackling home improvement and repair projects as well as construction contractors at the job site. Durably constructed of die cast aluminum and heat treated steel parts, this tool is both rugged and lightweight. The ergonomically designed handle has a rubber grip, providing for additional ease of use during long shifts. Recent upgrades include a smaller tool body, a semi-quick release for easier access to the drive blade to clear jams, a magazine cover for smooth fastener feeding, and an improved base plate design. The value provided by the revolutionary design of this innovative tool comes at far less expense than three separate tools. The Pneumatic 3-in-1 15.5-Gauge and 16-Gauge Flooring Stapler and Nailer includes a white rubber mallet, air tool oil, and adjustment tools. Operating Pressure 70 – 110 PSI, Magazine capacity 90 – 120 Staples. Compatible fasteners 16 Gauge Glue Collated T and L Cleats from 1-1/2" – 2", and 15.5 Gauge Glue Collated 1/2" Crown Staples from 1-1/2" – 2"

• Nailed It: This pneumatic flooring nailer and stapler features a lightweight aluminum body, ergonomic comfort grip handle, replaceable base plate and 3-in-1 design that allows it to easily switch between T-cleats, L-cleats and staples for maximum functionality.
• Ergonomic Design: This flooring nailer has an extended handle to prevent achy backs and a light strike bumper for low impact fastener driving. It comes with a rubber mallet to move flooring in place. It's ideal for professional jobs and home DIY projects.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	I need a replacement baseplate for 1/2" flooring is it possible tho by a replacement
Answer:	The only recommended fasteners are 16 gauge "T & L" cleats and 15.5 gauge staples.
Question:	Can I use it for 16ga finish or brad nails in this gun
Answer:	Hey I"m about to install Brazilian Cheery 3/4" wood too - how did it go for you???@@@
Question:	Has anyone installed 3/4 inch 3 1/2 in wide Brazilian Cherry hardwood with this gun using 16 ga 1 3/4 in L cleats. Did it work OK
Answer:	Yes, you can use any brand or Bostitch nail
Question:	Can I use any brand nailers with the NuMax SFL618 ? Recommendations...Bostitch ok
Answer:	Not at this time

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2" Flooring Nailer and Stapler is lightweight power tool can be used to finish your projects or repairs as it features an aluminum body, ergonomic comfort grip handle, replaceable base plate and 3-in-1 design that allows you to easily switch between T-cleats, L-cleats and staples for maximum functionality.

Easy to Use

This tool by NuMax can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. This tool is also extremely safe to be used as it comes in a die cast aluminum body and a quick release for clearing jams.

Product description

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Dual-speed motor optimized to drive a wide range of fasteners for a variety of applications
• Tool-free selector switch for sequential or bump Fire modes
• Tool-free depth adjustment for precise nail placement
• Stall release lever to reset driver blade in the event of a jam
• Adjustable rafter hook

User questions & answers

Question:	is it possible to use this nailer on dry wall
Answer:	Yes you can. Just use a smaller nail and adjust the depth.
Question:	Biene con cargador
Answer:	Si pero esta herramienta es muy mala mo la recomiendo
Question:	Do I need the two speed? Those who have the two speed, do you use the second one that is not on the 690? Thanks
Answer:	Yes. The 2 speed is worth the extra money
Question:	will this do framing, finishing and brad nails
Answer:	Only framing nails

Product description

NEU MASTER Electric nailer/stapler is compatible with 3/8” crown staples (equivalent to Arrow T50 staples & Stanley TRA700) and 18 gauge brad nails (equivalent to Tacwise 18G, Arrow BN18, Bostitch 18G & Rapid no. 8 brad nails) of the following lengths: Staples – 8mm (5/16”), 10mm (3/8”), 12mm (1/2”), 14mm (9/16”) and 16mm (5/8”). Nails – 15mm (9/16”) and 16mm (5/8”) Voltage:110-120V/60Hz Rated Current:11A Rated Firing Speed: ≤20pcs/min Stapler/Nailer Type 50 8-16mm type F 15-16mm Wire Spec: 2M PVC cable UL plug

• FOR FREE: 336pcs staples and 200pcs nails
• ✨Friendly after-sale service--We provide replacement service instead of repairing.
• DIY -- The electric brad nail gun ideal for DIY projects, including upholstery, wooden handiwork and home improving project.
• SAFETY -- Contact safety switch prevents unintentional firing.
• POWER ADJUSTABLE -- The electric staple gun has adjustable power knob for hard or soft material.
• 2 in 1 STAPLE AND NAIL GUN -- Work with Staple T50 series or TRA700 series from 5/16" to 5/8" and 18 gauge brad nail from 1/2'' to 5/8''.
• EASY TO USE -- Easy magazine release for quick reloading.

User questions & answers

Question:	is it 220 v or 110 v
Answer:	110
Question:	Will this fit 1/2” staples
Answer:	Yes, it could fire 1/2” staples.
Question:	What length brad nails/staples does this take
Answer:	The tool works with Staple T50 series or TRA700 series from 5/16” to 5/8" and 18 gauge brad nail from 1/2’’ to 5/8''. If my answer is not clear, please feel free to contact [email protected] for further assistance.
Question:	Does this multi tool work well for Upholstery
Answer:	I am a 76 year old woman and used it by myself to cover a tuffet.

Product features

Features

DIY -- The electric brad nail gun ideal for DIY projects, including upholstery, Wooden handiwork and home improving projects.

SAFETY -- Contact safety switch prevents unintentional firing.

POWER ADJUSTABLE -- The electric staple gun with adjustable power knob for hard or soft material.

2 in 1 STAPLE AND NAIL GUN -- Work with Staple T50 series or TRA700 series from 5/16” to 5/8" and 18 gauge brad nail from 1/2’’ to 5/8''.

EASY TO USE -- Easy magazine release for quick reloading.

ACCESSORY -- This tool including 18 gauge brad nail 5/8'' x 200pcs; T50 staple legs 3/8'' x 336pcs.

Step 1

• Squeeze the bracket of pusher assemble and pull out it

Step 2

• Put the staple strip in the magazine with points up

Step 3

• Or put the brad nail closely to the left side of magazine with points up

Step 4

• Push the pusher assemble until it locked

Step 1

• Confirm the adjustable power knob is in Max. position

Step 2

• Put the gun on work surface, Depress the contact safety pole with one hand firmly placing on the top of tool

Step 3

• Once the contact safety pole is depressed, push the trigger to fire. You must pick up the tool and reactivate the contact safety for each shot.

Product description

The Ryobi P320 brad nailer has comparable power to some gas-powered nailers and the convenience of a cordless power tool. Any nailing job you may need to perform around the house, from installing roofing tiles to reinforcing joints, can be accomplished with the P320. On a single charge of a 4 amp hour battery from Ryobi’s One+ system, you can fire up to 700 nails up to 50 millimeters long. Adjust your depth with an onboard dial so you do not have to worry about fiddling with extra tools. Be sure to see what you are working on with the built-in LED lighting, and keep it handy with the attached belt clip. Get what you need to get done with the P320. It’s built for work, so get to it.

• Drives up to 1700 nails per charge
• No compressors, hoses or pricey gas cartridges required. Cordless design offers both convenience and superior performance.
• Convenient adjustment dial regulates air pressure for optimum results.
• Low-nail indicator to quickly and easily see when it is time to reload
• Includes: 18-V ONE AirStrike 18-Gauge Cordless Brad Nailer, Battery sold separately

User questions & answers

Question:	How does this perform on solid hardwood like oak or maple? My 18g Paslode performs great but I'm tired of fuel cells, and expensive repairs
Answer:	How much do you spend on repairs and fuel cells? do the math and see if it make sense for you. There is no ongoing cost for this exept nails and it seems to work pretty good, Im sure it would preform well on solid hardwood (it will go through a formica countertop no problem and into wood below it). It's a semi precision tool and it wont take much abuse, but overall it really has alot more power than i thought it would. I'd say go for it.
Question:	What kinda nails does it use, e.g. Bostitch, Freeman, etc
Answer:	I cannot get my 320 to work with Porter Cable 16 gauge x 2" "Straight Finish Nails." They have a slight "head" to the nail and it seems to stop the gun from working. I've tried adjusting the pressure with no effect.
Question:	which battery and why doesn't Amazon have a link for that under Frequently bought together
Answer:	I don't know how you can do the whole house with one battery, I change batteries every 10 minutes, I would like to know what battery you have so I can order it
Question:	Will it work with 16D framing nails
Answer:	No it will not. It only works with 18 gauge straight brads. Ignore stop_go_boom's response, as the P325 uses 16 gauge brads, and 16 gauge is not the same as 16D. Look for a framing nailer. This is more suited to light trim work.
Question:	What power does this brad nailer run on
Answer:	This nailer runs on Ryobi 18v one+ battery.
Question:	can you used it for framing
Answer:	Not for Framing this is a finish nailer
Question:	Can you adjust for the depth the nail goes into the wood
Answer:	Yes. There is a dial which works easily. I love this brad nailer!
Question:	Can you adjust for the depth the nail goes into the wood
Answer:	After speaking with the vendor, They confirmed that you can adjust nails anywhere between 5/8 - 2 in. What you would do is dial the knob that's on the right side of the tool.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

The MILWAUKEE M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	How many year warranty for this item
Answer:	I have been told the 5 year warranty does not apply if it comes in an unmarked box...which it says is the case in the description...along with it being refurbished
Question:	What length nails does it take
Answer:	Hello, 5/8 to 2-1/8 nails. Thanks
Question:	How wide is the dent in the wood around the nail when sinking below the surface
Answer:	If it is adjusted right, no dent
Question:	What are the recommended nails (size and other criteria) to use with this tool? I Milwaukee cust service this week and got no response
Answer:	Nail Gauge 18. Maximum Fastener Size : 2-1/8 in Minimum Fastener Size : 5/8 in

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams

User questions & answers

Question:	Where do I get the end tips at
Answer:	That no-mar tip, as it's called, is no longer available. https://www.ereplacementparts.com/dewalt-dcn680b-type-20v-18ga-brad-nailer-parts-c-1009_1165_567196.html
Question:	Is the 20v battery included
Answer:	No, the battery was not included.
Question:	What is max nail length
Answer:	The Dewalt brad nailer shoots brads from 5/8” up to 2-1/8”. Hope this helps.
Question:	Does anybody know which dewalt nailer would be a good all around gun for trim to framing in one
Answer:	Unfortunately, there is no such gun made. By any manufacturer. A nail that would be strong enough for framing, would absolutely destroy trim pieces.

Product description

This product features a 20-Degree finish nailer, bump operating mode, and integrated LED lights as well. It is convenient and works effectively. It is definitely a great quality product.

• Integrated LED lights
• Bump operating mode
• 20-degree finish nailer
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Is it brushless
Answer:	I believe that it is brushless. I have 2 of the nail guns and they are great. Works fast and sets the nails ever time. Battery lasts a long time as well.
Question:	Just got the nail gun. somehow it jammed as soon as placed brads in it. it seems to flip the brad. how is that possible? not happy i'm wasting brads
Answer:	Ummm, yes, this is a finish nailer, big difference from a brad nailer. Make sure you are using 16 gauge 20 degree nails, not 15 gauge, and definitely not 18 gauge brads. This is a great nailer, but I'm not tossing out my Bostitch air nailers to replace it! This is a great supplement to the air nailers for small jobs that only last a day or so.
Question:	Have they sorted out the Low nail depth issue yet? After some use my contractors say it wont Drive 2-1/2 nails
Answer:	This is my second Dewalt finish nailer and I have never had any issues with it not driving 2 1/2" nails. That being said, if you are driving several 2 1/2 nails then you need to make sure you are working with a fully charged battery. I have noticed that if the battery gets to a 1/3 charge it will not drive 2 1/2" nails as deep. It also depends on the type of wood (hard or soft).
Question:	Can this be used for blind nailing tounge and groove paneling
Answer:	Yes but don't waste your money if you plan on using this gun a lot. I've had mine in the shop 3 times in the year I've owned it. Buy the 18 volt version is more powerful and breaks way less. I've used mine for the last 6 years at least. This new gun will not even drive 2 1/2" nails consistently through soft wood let alone any hard wood.

Product description

The Metabo HPT NR1890DRS 18V cordless framing nailer Hitachi power tools is now Metabo HPT. Same tools. New name. The Metabo HPT NR1890DRS 18V cordless plastic strip framing nailer completely raises the bar for cordless framing nailers. Get the power and performance of Metabo HPT (formerly Hitachi power tools) pneumatic nailers with the freedom of cordless technology. This cordless framing nailer is ideal for all construction framing applications along with punch-out work on a jobsite. Get quick in-and-out operation with minimal hassle and professional results. Designed so you no longer need to worry about dirty hoses, loud compressors or expensive Gas cartridges. High stable driving power allows the nailer to drive 3-1/2” nails into even the toughest of engineered lumber with ease Equipped with Metabo HPT unique air spring drive system that delivers similar performance as a pneumatic nailer, but offers total cordless freedom. Sealed compressed air drives each nail instant drive performance means there is zero ramp up time to drive nails drive up to 2 nails per second and up to 400 nails per charge using the compact 3.0Ah battery. Recoil feels like a pneumatic nailer. Best of all, no air tank required. Covered by Metabo HPT lifetime Lithium Ion tool & 2-year Lithium Ion battery & 1 Year charger. Dry fire Lock out system prevents nailer from driving when fasteners are low for added safety. Ergonomically formed soft grip handle provides comfort and ensures a secure hold. Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use. Pivoting rafter hook for easy storage when cordless nailer is not needed. 10. 8 lbs. And well balanced for easy maneuverability.

• Same tools. New name. Hitachi power tools have renamed to Metabo HPT
• Cordless Framing Nailer
• Included: NR1890DRS, Compact 3. 0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses
• Drives plastic strip nails from 2" to 3 1/2" at 2 nails per second and up to 400 nails per charge
• Zero Ramp up time: air spring system increased driving speed and provides recoil like a pneumatic nailer
• Unique air spring drive system: compressed air drives each nail
• Selective actuation: transitions between sequential mode and bump Fire mode

User questions & answers

Question:	This nail gun is for 21 degrease. ? Or for the convencional framing nails
Answer:	21° and 30° are both conventional framing nails. But this is a 21° nailer.
Question:	Just to make sure, the cordless nail only does bring a battery, fast charger, bag, and safety glasses
Answer:	Yes, and an M5 Allen Wrench. The Fast Charger is the UC18YFSL and it will charge the 3.0 Ah battery in 45 min. There is a Rapid Charger (UC18YSL3) that charges the same battery in 30 min.
Question:	Garantia pistola
Answer:	We offer a 60 day warranty. Hitachi offers a one year from date of purchase. All warranty issues after the first 60 days must go directly through Hitachi. Have a great day.
Question:	Will this gun dry fire? I just bought it and charged the battery but it doesnt fire. Does it have to have nails in it to fire
Answer:	No it will not, nor should you try to dry-fire a nail gun. It's generally very bad on the tool. It requires about three or four nails in it to fire, depending on the size of the nail. Which means that once you us it, the gun is NOT EMPTY just because it won't fire the last nail or two; there is every chance that if you drop it or kick it out of the way it will manage to fire one of the remaining nails. Always treat this nail gun and any other nail gun like it's ready to fire.

Product features

Unique Air Spring Drive System

Uses compressed air to drive each nail resulting in zero ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives

Tool-less Depth of Drive Adjustment

For a professional finish with varying materials

Selective Actuation on the Control Panel

Transitions between sequential mode and bump fire mode, when rapid nailing is preferred. Battery charge indicator located on tool control panel to easily check the available power in battery pack for less downtime

Pivoting Rafter Hook

For easy storage when nailer is not needed

Product description

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628)
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Compatible with all DEWALT 20V MAX* batteries
• Tool-free selectable trigger for sequential or contact actuation modes

User questions & answers

Question:	Can you use this nail finisher for outside fencing? Or is it just for crown molding and trim
Answer:	6' Cedar privacy fence...no. But picket, or redwood (3.5" or 5.5" boards) where you want a clean finish...absolutely! Note, a 15-gauge is as small as you'd want to go where finish-nailers are concerned. To add strength to your nailed boards, shoot the nails in at slight, opposing angles--not straight in. This will provide a substantially stronger hold. Also, to maximize hold, adjust the nail depth so that the nail head sits flush with the board. Counter-sinking the nail too much will weaken the hold strength.
Question:	Tweeters and integrated subwoofer??? Might want to double check the description
Answer:	Yes, it does chirp nicely as you hammer away, but I don’t think it’s from tweeters.
Question:	how powerful are the subwolfers
Answer:	The wolves are super strong!
Question:	Will someone alert the seller to update their description? I seriously doubt this nailer has an integrated subwoofer
Answer:	Hahaha, integrated Bluetooth speakers in your finish nailer ... 🤔

Product description

The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
• Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
• Compressor is required to use this product but is not included

User questions & answers

Question:	Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need
Answer:	: A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done.
Question:	Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools
Answer:	Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use.
Question:	what is the voltage
Answer:	The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps.

Product features

DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit