6 best husky brad nailers

• Durable - This 18 GA straight brad nailer designed with durable aluminum body and a ergonomically designed comfort grip handle. Note: This is a Pneumatic Brad Nailer, it needs connect Air Compressor by Air Hose. Working air pressure 75-100 PSI
• Compatible - This straight brad nailer is suitable for 3/8" - 2" length 18-Gauge brad nails. Depth adjustment switch provide three different kinds of nail depth modes, precise located the depth of nails
• Security - Improved magazine release latch to avoid pinching hands when placing nails, more safe then other brad nailer. The quick jam release design can easily clear jammed nails. Note: Please release the connect with the trachea, before opening the lam clearing latch
• Easy to Use - 360 degree adjustable exhaust. Notice: Please make sure that the vent is not towards the user when using
• Wide Application - This brad nailer can used for woodworking, pet house DIY, wood flooring, picture framing, door or window molding installation and much more

User questions & answers

Question:	Does this have a non-marring tip
Answer:	Dear Customer, We're sorry this nail gun don't have a non-marring tip. But the tip is made of high-end material, strong and durable enough. If you have any issues in using, you can contact us through Amazon message. Best regards, WORKPRO Customer Service
Question:	Do you need an air compressor for this to work? if you do, what should i buy? i'm just trying to put a stair skirt in. thank you
Answer:	Yes, this is a pneumatic brad nailer, so you need to buy an air compressor and an air hose. You can buy these products directly on Amazon.
Question:	What size minimum compressorwill work
Answer:	Dear Customer, This pneumatic brad nailer can work on (75-100) psi, (5-7) kg/cm2, (0.5-0.69) Mpa. So you can choose the suitable air compressor. Best Regards WORKPRO Customer Service
Question:	Does this come with the oil for lubricatiin? If not what type of oil should i use
Answer:	Dear Customer, There comes with a bottle of lubricatiin oil. If you need any more lubricatiin oil, you can buy the pneumatic tool oil. Best regards, WORKPRO Customer Service

Product features

WORKPRO 18-Gauge Pneumatic Brad Nailer

This WORKPRO 18-Gauge Pneumatic Brad Nailer Compatible with 3/8” up to 2” Nails.

Quick jam release design can easily clear jammed nails.

Magazine release latch

Improved magazine release latch to avoid pinching hands when placing nails.

Depth Adjustment wheel

Adjust firing depth of the nailer by the depth adjustment wheel according to your needs.

360 degree adjustable air exhaust

360 degree adjustable air exhaust port to control the direction of the air output.

Lubricating oil

Put a few drops of oil into the fitting before using to keep the brad nailer running smoothly!

Product description

The 2" 18-Gauge Brad Nailer - NT50AE2 is ideal for trim work, furniture building and other finish applications that require precision and performance that the pro and DIY both require. It accepts finish brad nails from 5/8" in length up to 2". With a lightweight economical design, this brad nailer is engineered for the toughest jobs.

• BRAD NAILER: Accepts 5/8" up to 2" 18-gauge brad nails
• FASTENERS: Accepts 5/8 In. to 2 In. 18-gauge fasteners
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 2.2 lbs, for easy all day use
• DEPTH ADJUSTMENT: Depth of drive dial allows the user to easily adjust the drive depth for a professional finish
• NO-MAR TIP: No-mar tip on the nose protects the work piece from unintended markings
• RELOAD INDICATOR: Located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided

User questions & answers

Question:	Can this be used to nail quarter round to the floorboards
Answer:	This nailer is perfect for quarter round. The smaller 18 gauge nails make it less likely to split the wood. I’ve also noticed that this nailer doesn’t leave dimple marks. I’ve used mine to install base trim, quarter round, shiplap, and furniture making.
Question:	Is it possible to fix the safety so that I can shot without applying pressure to the nose where the nail exits the gun
Answer:	I wouldn’t, seems like a good way to shoot your finger. Some of my guns have double triggers and it’s not an issue. Plus how would you control the depth of the nail setting action.
Question:	why does it say power source corded electric
Answer:	I guess they mean the air compressor is electric and it’s the power source. The nailer is all air.
Question:	can this gun take 18 gauge headless nails
Answer:	I got a stapler in my box, don't know what you will get!

Product features

360 Degree Adjustable Exhaust Port

Keeps dust, debris and oil off the finish project.

Visual Nail Reload Indicator

Located on the magazine and alerts the user when nail quantities are low so that blank drives are avoided.

Selective Actuation

Allows the user to select bump fire or contact fire modes with the simple flip of a switch.

Tool-less, Easy-to-clear Nose

For quick and simple nail extraction should a nail jam during use.

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

Bostitch 1.25-Inch 18-Gauge SS,500ct

• Size: 1.25-Inch brad nail
• Chisel Point & Coated finish
• 18-Guage; Contains 500 count in-Package
• For interior use. Use with BOSTITCH tools BTFP12233, SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, GBT1850K. Fits most 18 Gauge Brad Nailers.

User questions & answers

Question:	Do these have ring shanks? If so, do the rings go all the way down the shank
Answer:	Since 304 is austenitic, so these are essentially non-magnetic, but a strong Nd magnet will still have some attraction. They have LOWER strength and shear resistance than almost any other steel, which is an unavoidable trade-off for using 300 series stainless. There are high-strength stainless steels like 17-4 PH, or Nitronic 50, but no one in their right mind would use those for nails due to their extreme cost. Withdrawal resistance? Probably the same, depends more on the shape of the brad than anything else.
Question:	Are these recommended for exterior use
Answer:	usually all 18 ga nails will work with any 18 ga nailer.
Question:	do they respond to a magnet and do they have greater strength, shear resistance and withdrawal resistance than galvanised brads if used to fix 8mm cfc
Answer:	As for as the look and feels and size I would say better. As far as durability and longevity I can't say yet.
Question:	Will these ss brad nails work with the Ryobi Airstrike Brad nailer
Answer:	Yes

Product description

The Porter-Cable BN200C 18GA 2-Inch Brad Nailer Kit has a magnesium body that delivers both a strong and lightweight design. The brad nailer features a removable non-marring nose tip with on tool storage as well as an integrated rubber grip for improved comfort. The BN200C is equipped with a low nail reload indicator to help alert when to reload and has a special hardened driver blade for longer life. The BN200C kit includes : Nailer, ¼” fitting, carrying case and owners manual.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work
• Drives 18 gauge nails from 5/8-Inch to 2-Inch length

User questions & answers

Question:	Does this gun shoot staples as well? If so what size staples
Answer:	It has a D-ring at the top of the clip, my turnout coat has a clip that I clip it to.
Question:	Will Bostich brads work in this gun
Answer:	Says Engineered in the USA, Made in China on the box...... I didn't know that either till I just looked at the box. Kind of disappointing.
Question:	what size brads come with it
Answer:	Can be charged by either one.
Question:	Does this nailer also use finishing nails? And does it countersink the brads and nais? Thank You One more thing. Is it better to use 16 GA? or stay with 18? Building small projects like bird houses. Thanks again. Never used a nailer before. Old school. Use nail sets and the like. Ooops There goes my age. HA HA HA Tha
Answer:	Can be purchased with USB charger and 1 battery or with piggy back charger with 2 batteries.