9 best dewalt electric range

Product description

The DW505 1/2-inch VSR Dual Range Hammerdrill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design for easy handling and operating.

Handle everything from wood and steel to masonry and concrete with the DEWALT DW505 1/2-Inch VSR Dual-Range Hammerdrill. With its dependable 7.8 amp motor, this hammerdrill makes quick work of masonry hole drilling tasks. Enjoy the variable-speed trigger, and comfortable grip for job-specific performance and less user fatigue. This drill comes with a 360-degree side handle, a depth rod, and a chuck key.

1/2-Inch VSR Dual-Range Hammerdrill At a Glance: Powerful, 7.8 amp motor delivers 650 max watts out Dual-mode design for work with wood/steel drilling and concrete/masonry drilling Dual-speed performance for job-specific applications Ergonomic grip for comfortable handling Three-year limited warranty, one-year free service, 90-day money-back guarantee

The heavy-duty 7.8 amp motor lets you drill through masonry and brick. View larger.

An ergonomic grip and side handle allow for accurate drilling. View larger.

Powerful Motor with Overload Protection

The DEWALT 1/2-Inch VSR Dual-Range Hammerdrill's durable and powerful 7.8 amp motor is capable of delivering 650 maximum watts, which translates to performance in a broad range of applications. It also features overload protection and a depth rod that makes precise hole depth and material-specific performance easier to achieve.

In addition, the hammerdrill's high/low gear configuration makes it easy to handle both high-speed drilling and high-torque applications without placing undue stress on the motor.

Versatile, Dual-Mode Design

The DEWALT dual-mode design allows you to transition seamlessly between wood, steel, and masonry projects. Built to make quick work of concrete and masonry applications, the DW505's hammer mode allows it to bore through tough materials without damaging or burning the bit. Its optimum working range in concrete is from 5/32 to 3/8 inch.

The DW505 features no-load speeds ranging from 0 to 1,100 and 0 to 2,700 rpm, as well as the ability to deliver between 0 and 19,000 and 0 and 46,000 bpm in hammerdrill mode. It also features a 1/2-inch capacity when working with steel and a 1-1/2-inch capacity when working with wood drilling applications.

Comfortable, Accurate Handling

An ergonomic grip offers comfortable handling and goes a long way toward ensuring accurate results. The DW505's two-finger rubber trigger makes power control easy. Its 360-degree side handle offers hand-position options for overall control, as well as increased depth accuracy and a solid grip.

The DW505 measures 13 inches long and weighs an easy-to-manage 4.8 pounds.

The 1/2-Inch VSR Dual-Range Hammerdrill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW505 1/2-Inch VSR Dual-Range Hammerdrill, 360-degree side handle, depth rod, and chuck key.

With its dual-mode design, this versatile tool is ideal for wood, steel, and concrete applications.

From the Manufacturer

DEWALT DW505 1/2-Inch 7.2-Amp Variable-Speed Reversing Dual Range Hammerdrill

• 7.8 amp motor of DEWALT hammer drill provides high performance and overload protection
• High/low gear for high speed drilling or high toque applications
• Dual mode: hammerdrill/drill for wood, steel or masonry applications
• Lightweight design for easy use and handling in a variety of orientations
• Two-finger trigger for increased comfort
• 360-degree side handle with depth rod offers greater control, versatility, and increased depth accuracy
• Variable speed allows for precise hole placement on work surface

User questions & answers

Question:	Voltage 220V
Answer:	This is all it gives on specs from BIC America.Price (MSRP): $399/Each, $798/PairDesign: Double-ported Bi-ampable 3-way 15" Floor Speaker.Frequency Response: 24Hz-20kHz +/- 3dBSensitivity: 95dB @ 2.83V/1 watt, 1 meterDrivers: One High Excursion Custom Eviction Series 15" woofer with a high power, heavy duty magnet, one sealed back 5 1/4" wide dispersion midrange, and one high efficiency horn tweeter with extended output to 116dB.Magnetic Shielding: NOGold-Plated Terminals:YESRecommended Power: 430 Watts Peak, 225 Watts RMSImpedance: 8 ohmsDimensions: 43"H x 17 1/2"W x 12 1/2"D, Carton 48"H x 22"W x 18"DWeight: 70 Pounds each, In Carton 72 PoundsWarranty: 5 years parts and labor.
Question:	Does it come with a hard case or bag
Answer:	Awesome speakers! Has horn tweeter mid bass woofer and separate woofer. They work best on bi-amped receiver
Question:	What size chuck key
Answer:	Yes, I have never had mine off. You can search around to other web sites that sell them to see what they look like.
Question:	what is the max diamter drill bit foe concreat
Answer:	Yes 175watts rms is enough. Your denon e300 is only 75-watts rms into 8-ohms 2channel. a bit underpowered. sorry to drag up a old thread. but these speakers are for sale again in 2020.

Product description

8.0A motor delivers high-performance in heavy-duty applications. 3/8" All-metal Ratcheting keyless chuck for greater bit retention. 0 to 2500 RPM, VSR trigger for versatility in drilling and fastening applications. Soft-grip handle design offers increased gripping surface and comfort. All ball-bearing construction provides greater durability and longer tool life. Does not include case. This product is manufactured in china. This product meets customer requirement.

Powerful, durable, and user-friendly, the DEWALT DWD112 3/8-Inch VSR Pistol Grip Drill with Keyless Chuck combines the strength of ball-bearing construction with a robust, 8-amp motor for efficient operation. Ideal for a range of professional jobs, the DWD112 provides the reliability and versatility you need to see your projects to completion.

3/8-Inch VSR Pistol Grip Drill with Keyless All-Metal Chuck At a Glance: Powered by 8-amp motor for heavy-duty jobs 1 to 1-1/8-inch capacity in wood; 3/8-inch capacity in steel 3/8-inch all-metal ratcheting chuck for better bit retention Weighs 4.1 pounds Backed by a limited three-year warranty; 90-day money-back guarantee

The VSR Pistol Grip Drill provides precise drilling in a wide range of materials. View larger.

Powerful Motor for Robust Performance and High-Capacity Drilling

The DEWALT DWD112 3/8-Inch VSR Pistol Grip Drill owes its powerful performance to a 8-amp motor, and is suited for heavy-duty jobs. It offers a 1-inch capacity in wood with a spade bit (1-1/8-inch capacity with hole saw) and a 3/8-inch capacity in steel, providing the flexibility you need to handle a variety of materials.

Lightweight Design with All-Metal Chuck for Greater Bit Retention

With a 3/8-inch, all-metal, ratcheting keyless chuck, you'll enjoy greater bit retention and increased productivity. At the same time, a soft grip-handle design provides ample surface and hand comfort for long-term use without excessive strain on wrists and hands. And because it weighs in at just 4.1 pounds, this tool is easy to store and won't weigh you down.

Variable Speed for Versatility

Match the correct speed to the job with the 0 - 2,500 rpm, variable-speed trigger, and enjoy consistency and precision. You'll also appreciate the 100 percent ball-bearing construction, which helps the DWD112 stand up to wear and tear on any job site.

Warranty Information

The DWD112 3/8-Inch VSR Pistol Grip Drill with Keyless Chuck is backed by a limited three-year warranty, 90-day money-back guarantee, and one-year free service contract.

What's in the Box

3/8-Inch VSR pistol grip drill with keyless all-metal chuck and manual.

This drill has a 8-amp motor for heavy-duty jobs and an all-metal ratcheting chuck for better bit retention.

• 8.0A motor delivers high-performance in heavy-duty applications
• This product is manufactured in China
• This product meets customer requirement
• 8.0 Amp motor delivers high performance in heavy-duty applications
• 3/8-inch all-metal ratcheting keyless chuck for greater bit retention
• 0-2,500 RPM, vsr trigger for versatility in drilling and fastening applications
• Soft grip handle design offers increased gripping surface and comfort
• All ball-bearing construction provides greater durability and longer tool life

User questions & answers

Question:	when you say 12v do you mean 120 volt? I have never heard of a 12 volt drill corded
Answer:	Corded power tools are rated in amps instead of volts.This way a user knows how much power they can draw without flipping a breaker. Most breakers are either 15 or 20 amp. This does operate on a 120 volt socket though. Nothing 12 volt about it.
Question:	Does this drill come with a storage case or bag
Answer:	It did not come with a storage case or bag when I purchased it.
Question:	Would this drill be sufficient to use on a concrete wall? Our condo is almost entirely concrete, looking to hang a pot holder, pictures, etc
Answer:	I would reccomend a hammerdrill instead. It is intended for drilling in concrete. They are usually function as a regular and hammer drill.One like this. http://www.amazon.com/gp/aw/d/B0008ELQ0G/ref=mp_s_a_1_1?qid=1376105960&sr=8-1&pi=SL75
Question:	Does the trigger lock
Answer:	Sorry it took so long but no the trigger does not lock - but I do have to tell you - it is a great drill (actually I use it to drive screws more than anything - and I drive about 100 screws a week - I have had this for 2 months now - no problems with it and I like the keyless chuck

Product features

VSR Pistol Grip Drill

The DWD112 3/8" VSR Pistol Grip Drill with Keyless Chuck has a powerful 8 Amp motor to deliver 0-2,500 rpm speed for heavy-duty applications. Features solid bit retention and a soft grip handle design for comfort.

• 0-2,500 rpm with VSR trigger for versatility in drilling and fastening applications
• 3/8" all-metal, ratcheting, keyless chuck for greater bit retention

Product description

The DEWALT 20V Max 1/2 Inch High Torque Impact Wrenches are designed for mechanical contractors, plumbers, automotive users, maintenance and repair professionals and remodelers. They are designed for professionals who demand a tool for difficult fastening applications, such as driving and removing fasteners, nuts and bolts in wood, metal and concrete. These impact wrenches deliver the power, durability and control they need to tackle the toughest tasks on the jobsite. They have 400 Feet/Pound of torque to perform a wide range of heavy duty fastening applications.

• 400-Feet Pound of maximum torque to perform a wide range of heavy-duty fastening applications
• Ergonomic handle provides user superior comfort and control
• Variable speed trigger with electric brake provides user improved control
• Durable magnesium gear case and all metal transmission for extended durability
• Bare tool, batteries and charger sold separately

User questions & answers

Question:	Is there a 18volt tool similar in torque value in the dewalt line
Answer:	no stay with 20v
Question:	How easy is it to remove a socket? Do you have to press the pin, or can you just pull it off? The hog ring version doesn't seem to be available
Answer:	I honestly think the hog ring is a solution to a problem that doesn't exist. Detente is better. Not hard to use at all. It won't wear out. The hog ring will be good for about a year.
Question:	can you use the battery 20v max lithium ion 1.5ah with this tool
Answer:	Yes 20V is all that matters. You can use any 20V Dewalt battery with any 20V Dewalt tool. Still the amp rating directly determines how long the battery will last. So using 1.5AH battery will only drive half as many screws/bolts compared to a 3AH battery before the battery is dead but it will still work.
Question:	Amazon lists the torque at 300 ft lbs while the DeWalt site lists it at 400 ft lbs. Which is it
Answer:	I'm not going to bulls#!t anyone. I never used this product, BUT typically the max torque of Impact Wrenches is in reverse. So maybe it's 400 ft.-lbs. in reverse and 300 ft.-lbs. foward? I don't know.

Product description

The DEWALT DCF894B 20V MAX* XR ½ in. Mid-Range Cordless Impact Wrench with Detent Pin Anvil delivers up to 330 ft-lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench Control, which helps to prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space. This is a bare tool; battery sold separately. 3 Year Limited Warranty, 1 Year Free Service Contract, 90 Day Money Back Guarantee.

• Up to 330 ft lbs max of fastening torque at only 3.48lbs
• Features precision wrench control. In forward the tool will pause before impacting to help prevent overtightening. In reverse the tool lowers speed when fastener is loose to help prevent run off
• 3 mode settings to complete a variety of applications
• Dewalt built Brushless motor for increased efficiency and runtime vs. Brushed DEWALT DCF894B 20V max* XR 1/2 in. Mid range cordless impact wrench with detent pin anvil (tool only)
• Variable speed trigger helps to provide speed control

User questions & answers

Question:	Can I use a 20v 6.0ah flex volt battery with this
Answer:	Too heavy? That's like saying steel toed boots are a lot heavier than non-steel toed boots. There's only ounces of difference even over a long amount of time.
Question:	How does the detent pin feel on this model? I had an older 18v model and the detent pin made it such a pain to get the sockets off
Answer:	The detent pin is the one flaw of this impact. Mine started sticking so it wouldn’t hold a socket very well after a week. I replaced the anvil with a hog ring. Super easy to do and it cost less than $20. Great deal considering the difference in price for the tool with the detent vs hog ring was $80
Question:	Is this item good enough for replace the car tires SUV
Answer:	Yes. I easily replace all the tires on my old Dodge Ram with it. It has plenty of power even for old rusty bolts. It doesn't take a lot of power so you can use small batteries to keep the gun lighter.
Question:	Does this model hold sockets or is that the other model with the hog ring
Answer:	This model is with the pin which is great. If you want the socket to hold very strongly because you will do a lot of the same size bolts, you align the pin of the gun with the hole in your socket (only one side out of the 4). If you have a job to do where you must change sockets size often, then you don't align the pin of the gun with the hole of the socket (the other 3 sides) which makes the sockets a lot easier to take off because the pin doesn't snap in place. You have the best of both worlds.

Product description

The DEWALT DCF899M1 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil (4.0 Ah) features up to 700 ftpounds of MAX Torque and 1200 ftpounds of MAX breakaway torque. This tool has a compact design of 8 13/16" in length and weighs only 7.2pounds for ease of use. It also has multi speed control for a variety of applications (0 400/1,200/1,900 RPM). A heavy duty 1/2" Anvil with detent pin. An LED light with 20 second delay allows for increased visibility in dark or tight workspaces. Includes: DCF899 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil, 20V XR Lith Ion battery (4.0 Ah), Fast Charger, Tool bag.

• Compact design and lightweight at only 7.2 pounds
• Heavy Duty 1/2 inch Anvil with detent pin
• Up to 700 feet pounds of MAX Torque
• LED light with 20 second delay for increased visibility
• Maximum Speed (RPM):1900

User questions & answers

Question:	using 1 of the 3 speeds ,is there anyway to set the torque to 100 ft-lbs
Answer:	The manual states that the maximum torque values for each speed are 100/300/700. So if you set it to Speed 1 then the maximum torque it will deliver is 100 ft-lbs.
Question:	Dofference between dcf899m1 and dcf899b
Answer:	Dewalt codes are as follows B = bare tool. No battery. C = Compact (1.5Ah) battery. D = 2Ah compact battery. L = 3Ah battery. M = 4Ah battery. P = 5Ah battery. T = 6Ah Flexvolt battery. X = 9Ah Flexvolt battery. DCF899 = Detent pin version. DCF899H = Hog ring version. So, DCF899M1 is detent pin with 1 4Ah battery. If you see something like DCF899HP2, that means hog ring version with 2 5Ah battery. Otherwise, whether it's DCF899B or DCF899M1 or DCF899P1, the tool itself is EXACTLY the same.
Question:	Is this a kit, or just the lone drill
Answer:	DCF899B is the DCF899 impact with a detent anvil sold as a (B) bare tool. DCF899HB is the DCF899H impact with a (H) hog ring anvil* sold as a (B) bare tool. DCF899M1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 4Ah battery, and a bag. DCF899P1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 5Ah battery, and a bag. DCF899P2 is the DCF899 impact with detent anvil sold as a kit with charger, two (2) 5Ah batteries, and a bag. DCF899HP2 is the DCF899H impact with hog ring anvil* sold as a kit with charger, two (2) 5Ah batteries, and a bag *Difference between detent and hog ring: Detent holds socket more securely but must be put on so pin lines up with hole in impact socket & will need a small screwdriver or the like to release. Hog ring allows one to put on and pull off impact sockets by hand, though usually pretty difficult at first until broken in. Of course you should only use impact sockets/extensions If you put a hand socket (usually chrome) on a hog ring it will lock on and you will need a tool to get it off because the indentations are different. That's also a good way to break the hog ring, but if that happens they are cheap and easy to replace. Detents are usually more suited for situations where socket changes are infrequent like in a factory setting & hog rings for where frequent changes are needed like automotive work.
Question:	My boyfriend mentioned briefly he wanted a dewalt gun that apparently is so strong that he can change tires within minutes with it. could this be it
Answer:	Yes. This could be it. This is currently Dewalts newest and strongest cordless impact wrench. You might want to look for the one that comes with batteries and a charger if he doesn't have that already. Be mindful that this model comes with two variations: hog ring and detent anvil. Detent anvil holds the socket tighter but uses a tool (which is probably included)to change the sockets while hog ring holds the socket on with a split washer but doesn't require a tool. Great tool though with either option.

Product features

DEWALT DCF899M1 20V MAX XR Brushless High Torque Impact Wrench with Dentent Pin Anvil

The DCF899B 20V MAX* XR Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.

Features:

• Up to 700 ft-lbs of max torque and 1200 ft-lbs of max breakaway torque
• Compact design of 8-13/16" in length
• Multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM)
• 1/2" Anvil with detent pin (also available with hog ring)
• LED light with 20-second delay for increased visibility

Product description

DEWALT DCCS620B 20V MAX XR Compact 12 in. Cordless Chainsaw (Tool Only).

• Low kick back 12" Oregon bar and chain: for construction and outdoor cutting applications
• High efficiency brushless motor: maximizes run time and motor life and chain gauge 0. 043, chain speed 25. 2 feet/second
• Tool free chain tensioning and bar tightening knob: for proper bar clamping force
• Compact and lightweight design: Only 8. 8 pound For maximum user control and comfort. This is a bare tool Item, Battery sold separately
• Chain speed: 25. 2 feet/second

User questions & answers

Question:	Does it come with a case
Answer:	No
Question:	Would this chainsaw be able to use a Dewalt 20v battery from a cordless drill
Answer:	Interesting to me that in 2 years, no one has been able to answer this question. While I am sure the original person who asked isn’t waiting around for someone to answer, maybe it will help someone else.... B&BW does make a bubble bath in some limited scents. It has been years since I had a tub that I liked enough to take a tub in so it’s been at least 3-4 years since I last had some. I am not sure whether there is a seller on Amazon who sells any, but I have gotten some from the brick and mortar I used to go to before I became a little more internet savvy. That said, a salesperson in their store once told me that you can use the shower wash/gel as a bubble bath soap in the tub. You just use a little more because it is a thinner product. Hope this helps someone!! My favorite soap product ever, which I use everywhere I need a soap.
Question:	Does this chainsaw cut 10” diameter trees
Answer:	I order all the time especially if they offer a special.
Question:	Is the chain pre sharpened or do i need to have it sharpened before use
Answer:	Yes

Product description

1/2-inch VSR Stud and Joist Corded Electric Drill with Clutch.

• Mechanical clutch in low gear to prevent bit lock-up and provides increased gear life of the electric drill
• 11 amp, DEWALT-built motor for increased power and performance in high-torque applications of the corded drill
• DEWALT corded drill has 2 variable speed ranges (0-330 / 0-1300 rpm) to match appropriate speed to the application
• Metal-gear housing for jobsite durability and increased reliability
• Adjustable front handle and 2-position side handle provide maximum leverage and control
• 100% ball bearing construction provides durability and longer tool life

User questions & answers

Question:	What are the dimensions from tip of big connection to back of handle? Tip of big connection to back of drill (with handle rotated out of place
Answer:	The available DEWALT case is part number 395563-00.
Question:	this says 20v but then it says electric and has a cord which is it
Answer:	Neither bag or case. It does come with a really neat chuck holder.
Question:	I know there are better drills for it, but will this mix mud or concrete
Answer:	Sorry, I have had no experience with the DWE5010 hammer drill, but the DW511, by flipping a switch, can be used as a hammer drill. Hope this helps. I am happy with my DW511.
Question:	Where is is made
Answer:	Yes Master Yoda

Product description

The DEWALT DCD771C2 20 Volt MAX Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0 450 RPMs and 0 1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20 volt MAX compact Lithium ion battery packs, a compact charger and durable contractor bag. Chuck type - Keyless.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 and 1,500 rpm) for a range of fastening and drilling applications. Chuck type: Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control. Tool width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 ampere hour

User questions & answers

Question:	can it drill 1/4 holes into plastic
Answer:	----Its not the drill, It's the BIT ----Hanson makes particular bits for drilling plastic, with any drill regardless of voltage, and theyre available most any good hardware store or Tap Plastics. They have a particularly pointed tip, so don't ever attempt to ever use them on wood or metal, as doing so would render it crapp for plastic use from then on. I have 1/8, 3/16, and 1/4 in my arsenal, and they pretty much cover any plastic, ABS, PVC, and especially Plexi-Glas projects I encounter. Yeah, they're a buck or two higher than regular bits, but they also wont crack your pretty plexi-glas project all to hell like a standard twist drill bit will.
Question:	Does this drill have a built in LED light
Answer:	Yes, it has a light. But it's worse than useless. It lights the area nearby, but casts a shadow on the spot you are drilling. The glare makes it actually harder to see what you're doing.
Question:	Would you recommend this drill over the DEWALT DC970K-2 18-Volt Drill/Driver Kit (http://www.amazon.com/dp/B002RLR0EY)? If so, why
Answer:	I had an oportunity to use the 18V when I installed the railings on my father in laws staircase. I worked absolutely great but I had to keep switching batteries and kept one on the charger. He got it last Christmas. I told myself then the Dewalt was far superior to the two brands of portable drills I was using that I was going to get a Dewalt for myself. Honestly, when I ordered the 20V I assumed it was the same as my father in law had but his was the 18V. I would be happy with either but the 20V I have is smaller in size and lighter than the 18V that he has. Plus the 20V lithium batteries last a long long time before you have to recharge but then again replacement batteries are expensive. I just used the 20V to build my garage and so far I've only swithed batteries 5 times and that includes all the siding, drywall, wire routing. BTW I use the new star bit screws for everything they are far superior to phillips and I have given all my boxes of phillips screws away; along with my two "other brand" cordless drills.
Question:	Does this unit come with one or two batteries
Answer:	As of March 22, 2020 the Description clearly says it comes with two batteries... "...The tools weighs 3.6 pounds and contains 2 20 volt Max compact Lithium ion battery packs "

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

The DEWALT® Carbon Fiber Composite Staple Gun features a carbon fiber composite housing that weighs 50 percent less and reduces muscle fatigue by 25 percent. The quick and easy button load design and a low fastener indicator ensures the supply is ideal for repetitive jobs, like insulation and roofing or carpet underlayment. A reversible belt hook provides left or right-handed access.

• 2-In-1 Manual Staple gun accepts heavy-duty staples and 18 gauge brads.
• Carbon fiber composite housing for less weight.
• Low fastener indicator for convenience.
• Bottom load design for quick and easy loading.
• Reversible belt hook for left or right-handed access.

User questions & answers

Question:	Can use u-shaped staples in this
Answer:	I am not sure. The staples I use are more of a square.
Question:	Does this item come packaged with any staples
Answer:	no
Question:	What size of brad nail can be use with this
Answer:	1/2" and 5/8" 18 gauge brads
Question:	can anyone provide a like to staples and brads that fit this
Answer:	For staples: 1.Dewalt DWHTTA700 2.Stanly TRA700 3.Bostitch BTA700 4.Arrow T50 As would any 1/4-9/16 inch staple would work or metric 6-14 mm. As for Brads: No Dewalt, sorry. 1.Stanly SWKBN 2.Bostitch BT1300 3.Arrow BN18 Or any brad that's 1/2-5/8 inch or 12mm-15mm. Hope this helps.