8 best dewalt air compressor combo

Product description

DeWALT DWFP1KIT 165 PSI 18 Gauge 2-1/8" Pneumatic Nailer w/Compressor Combo Kit

• Includes full manufacturer warranty

User questions & answers

Question:	what length of brad nails can I use with this
Answer:	Up to 2 inch.
Question:	correction not cord - how long is the hose
Answer:	25 foot

Product description

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability. Kit includes: DWFP12231 18 ga Brad Nailer, DWFP55126 Compressor, Air hose with fittings, sample fasteners, and owners manual.

• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
• Tool-free depth-of-drive adjustment and tool-free jam release
• Low 75.5 dBA for a quiet work environment
• Kindly refer user manual for instructions.
• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI

User questions & answers

Question:	what is HP
Answer:	These products are not rated in HP.
Question:	Can i use 200 feet of air house will the compressor take it
Answer:	It's not advisable to use such a long air hose, even if it would work. It would be useful to inquire about a long electrical extension that would go at least half way. A qualified electrician could shed some light on this (pun intended). I wouldn't do either; there is some risk in running electrical wire or an air hose under pressure such a long distance.
Question:	Is this good for crown molding and flooring installs with it support for what I am looking to do
Answer:	Ideally you will want a finish nailer for crown molding work. Please contact DEWALT at 1-800-433-9258 for further assistance.
Question:	What is the length of the included hose
Answer:	I haven't measured it but I'm thinking it's probably a 25'

Product features

DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability.

Kit Includes:

Product description

The Bostitch BTFP3KIT 3-Tool Portable Air Compressor Combo Kit is ideal for interior and exterior finishing and trimming project for a variety of crafts like furniture, cabinets, and staircases. It features a 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered 90 PSI pump, which enables long tool run time with quick recovery. The air compressor features long-life oil-free, maintenance-free pump for convenient use. It has a Bostitch high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]. At only 78.5 dBA operational noise level it offers you a quiet work environment. The SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8 in. to 2 in.. SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4 in. to 2-1/2 inch. The BTFP71875 heavy-duty 3/8 in. crown stapler drives 3/8 in. crown staples from 1/4 in. to 9/16 in. and 18GA brad nails from 1/2 in. to 5/8 in.. 1/4 in. x 15' PVC air hose with fittings is included. Includes: 1) 6-gallon Pancake Compressor, 1) 18GA 2 in. Brad nailer, 1) 2-1/2 in. 16GA Straight Finish Nailer, 1) Heavy Duty 3/8 in. Crown Stapler, 1) 25' Air Hose.

• CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor.
• BRAD NAILER: The SB-1850BN drives 18-gauge Brad Nails from 5/8" to 2" for a wide variety of applications
• STRAIGHT FINISH NAILER: The SB-1664FN drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails.
• HEAVY DUTY CROWN STAPLER: The BTFP71875 drives heavy duty 3/8" Crown staples from 1/4" to 9/16"
• AIR HOSE: 15-foot, 1/4" x 25' PVC air hose with fittings air hose, and fittings offer plenty of length for maneuverability
• WARRANTY: This kit is covered by a 1-year limited warranty for peace of mind

User questions & answers

Question:	How long for pressure to build up on initial start up? Thanks
Answer:	If it's not holding pressure check all connections you may have a loose one.
Question:	If i buy this for my husband, do i need to buy an air hose, and if so, what do i buy? this is all stuff i know nothing about. thank you
Answer:	Air hose and some attachments come with. In the future you may want to get a kit with air gun, tire inflater and changeable fittings.
Question:	Can this be used for roofing
Answer:	It works perfectly to run one roofing gun. I’ve bought two of them and they both could handle the work load perfectly. And to comment on one of these guys replies to your question, He said the compressor would run continuously and burn up” well that’s not only untrue but impossible. You would have to be able to lay 5 square an hour all day long not just an hour or two for it to even be remotely possible to burn up that compressor. Not saying you couldn’t lay 5 square an hour but you can’t do it for several hours straight that’s for sure. I personally have put on 11 bundles per hour for the first 2 hours and the compressor did not run continuously and even if it did it wouldn’t have burnt up. Those specific compressors are designed to click off and on as many times as you can make them do so.
Question:	Can a framing nailer be used on this compressor or just finishing
Answer:	Yes, I run my Hitachi framing nailer off this. Maybe 30-40 .141 x3" nails into dimensional lumber before the compressor kicks on. Could I use a more powerful compressor for framing? Sure. But the weight and cost of this thing are very nice. Would be underpowered for roofing or sheathing applications, though.

Product description

Vertical stand feature and collapsible handle allows user to save space by transporting or storing the compressor in a vertical position. 5. 0 SCFM (standard cubic feet per minute) @ 90 psi (pounds per square inch) allows the compressor to recover quickly after its initial tank charge is exhausted. 78 dB (decibel) operational noise level for a quieter work environment. Efficient high pressure technology allows for longer pump and motor life. Oil-free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension code (12 gauge or heavier, 50 ft. or less) due to consistent amp draw requirement of the compressor. High flow coupler allows for maximum nailer performance. Metal console panel provides a display area as well as protects the gauges, couplers, and regulator. High flow coupler allows for maximum nailer performance. 2" gauges allow for an easy to read surface. 1 year limited . Vertical stand feature and collapsible handle allows user to save space by transporting or storing the compressor in a vertical position. This product is manufactured in United States. This product meets customer requirement.

DEWALT built the D55146 Heavy Duty 4.5 Gallon, 225 PSI, Heavy Duty Hand Carry Compressor with Wheels is quiet, efficient and solidly built; constructed to withstand harsh jobsite conditions. Its dual connections allow users to simultaneously operate up to 3 framing nailers or 2 roofing nailers. This versatile compressor is useful to both small framing carpenters & remodelers and large trim carpenter crews & remodelers alike. The unique, patented high efficiency motor and high pressure pump provide a maximum pressure of 225 PSI with 5.0 SCFM @ 90 PSI so you never lose pressure. The D55146 is convenient, with an oil free, maintenance free pump and is easy to move & store with pneumatic wheels. It’s the perfect compressor to choose if you need a lot of power and a low maintenance tool.

From the Manufacturer

The D55146 is a heavy-duty, 225 PSI, 4.5 gallon, 120 volt electric, hand-carry with a mobility kit that is built to stand up to the toughest conductions on a jobsite.  The D55146 produces the air necessary to support up to three framing nailers or two roofing nailers simultaneously.  Additionally, the innovative design of the unit provides professional contractors with increased durability and versatility.  Designed for small framing crews, trim carpenters, deck builders and remodelers, the D55146 is built to handle the most demanding nailing and stapling applications such as sheathing and decking but, is versatile enough to handle the needs of a large trim carpenter crew, or remodeler.  The D55146 features DeWALT patented high efficiency motor and high pressure pump that allows users to take advantage of the additional performance provided by 225 PSI, while at the same time allowing a user’s productivity to be enhanced by a pump that produces 5.0 SCFM (Actual) @ 90 PSI and results in a quick compressor recovery time.

• 225 PSI max tank storage pressure provides a user with 80% more usable air than the industry leader; Tool Length : 33.5 inches
• 5.0 SCFM at 90 PSI allows the compressor to recover quickly after its initial tank charge is exhausted
• vertical stand feature and collapsible handle allows a user to save space by transporting or storing the compressor in a vertical position
• 78 dBA operational noise level for a quieter work environment
• HORSEPOWER: 1.6 HP

User questions & answers

Question:	What comes wih the compressor
Answer:	Don't know, I gave it as a gift to my son that lives in another state. Sorry about that
Question:	Where was your compressor manufactured
Answer:	Some parts made in Taiwan, But I think the compressor assembled in USA. I bought it five years ago, and it still running
Question:	How do you turn it on if the switch is broken
Answer:	Hi Lenora...sorry...I also MISREAD the question thinking it said how do I turn it OFF... must still be sleepy. I would think a small engine repair place would be able to replace the switch. Shame to not be able to use it.
Question:	Is this unit powerful enough to inflate a 20 inch tractor/trailer tire to 110 PSI
Answer:	tank cut off pressure is 200 psi.It comes back on when tank drops to 150 psi...so yes-it will fill the 20 incher.I would get a clip on chuck because it would take a few minutes.you can set the regulator to deliver 110 psi-so no worries of overinflation.

Product description

Our 20V max* corded/cordless air inflator can run on any one of three power sources** for maximum versatility: 20V max* battery, 12V DC, or 110V AC. Use it on the jobsite, or on the go. It features a high pressure rubber hose for durability. The threaded chuck and included onboard accessories make it easy to inflate items from tires to footballs. Setting desired air pressure is simple with the digital gauge, and the auto shutoff provides accurate inflation. The high volume hose allows fast inflation of mattresses and other inflatables with the push of a button. Move the hose to the deflation port for Quick and easy take down. An onboard LED light helps to provide illumination in dark spaces. Heavy duty rubber feet help reduce walking while in use. **Battery, charger, and AC power adapter sold separately.

• Air compressor tire inflator comes with high-pressure inflation mode with automatic shutoff
• Digital tire inflator has high-volume inflation and deflation modes
• LED light of the portable tire inflator for car helps to provide illumination
• Three power sources for inflation on a jobsite and on the go (e.g. 20V MAX* battery, 12V DC, or 110V AC)
• Convenient onboard accessory storage
• Heavy-duty rubber feet help reduce walking when in use
• Threaded chuck for secure connection to inflation valve

User questions & answers

Question:	What does "Bare" mean? Does it have the battery, hoses, connectors etc
Answer:	Bare tool means just the tool, no battery or charger. hoses and connectors included along with 12v car lighter socket are part of the tool
Question:	Ok I see that it doesnt come with a ac cord so what is the part # so we can order the ac cord also
Answer:	It looks like this is the power cord. https://www.amazon.com/dp/B07MLJY3Y5/ref=cm_sw_r_cp_apa_i_tpFnFbYMS62DH
Question:	How many gpm (gallons per minute) or lpm (liters per minute) does this supply? and how many minutes of operation on a charge
Answer:	The DCC020IB inflator can inflate a car tire (235-45r17) from 0 to 35 PSI in 4 minutes 38 seconds or a truck tire (275-45r17) from 0 to 35 PSI in 8 minutes 15 seconds. On a single charge using battery model DCB230, the inflator can fill over 6 average car tires or between 3-4 truck tires.
Question:	What is the max pressure
Answer:	MAX PSI: 160

Product description

INCLUDES: Two Universal Air Couplers (attached) Instruction ManualFEATURES: 3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI enables large amount of nails to be fired and provides quick recovery Durable oil free pump provides extended maintenance-free operation Low 71.5* dBA allows for quieter operation (*Tested per ISO3744) Low 12 amp draw motor provides easy start-up and reduces breaker tripping Lightweight (36 lbs), thin (12.5") and compact design is easy to carry and store Compressor can be operated/stored in either the vertical or horizontal position

• 3.0 SCFM delivered at 90 PSI pump, 2.5 gallon tank and 200 max PSI ; Pump Speed 2,300 rpm
• Durable oil Free pump provides extended maintenance Free operation
• Low 71.5 dB allows for quieter operation;High flow regulator for increased Performance
• Low 12 amp draw Motor provides Easy start up and reduces breaker tripping
• Lightweight (36 pounds), thin (12.5") and Compact Design is Easy to carry and store

User questions & answers

Question:	Hardwood installs, i been using 6gal @2.8 scfm will it do as good if not better being a 2.5 tank w/3.0 scfm's. Will this work
Answer:	This model delivers 3.0 SCFM @ 90 PSI with a maximum tank pressure of 200 PSI. Please consult your tools CFM requirements to confirm if this will work.
Question:	Will this run a standard 1/2" impact wrench.? Im looking for a small garage unit for tires and minor service. Die grinder, impact etc
Answer:	No enough air capacity..
Question:	What is the duty rating on this unit? Is it 50% like most oiless
Answer:	"This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50% average duty cycle be maintained; that is, the air compressor pump should not run more than 5 minutes in any 10 minute period." (Quoted from the instruction manual) -- so the short answer would be yes.
Question:	Can anyone confirm this compressor will run off a Honda EU2000i generator
Answer:	Your generator could this pretty easily. Any (US) generator rated for 1400 watts or higher will work. Most (US) 1000w generators will work, so long as they accept spikes up to 1400w. Yours accepts 1600w continuous with spikes up to to 2000w.

Product features

DEWALT DWFP55130 Heavy Duty 200 PSI Quiet Trim Compressor

This 2.5 Gallon, 200 Max PSI, compressor is ideal for supporting a variety of pneumatic and air tool applications. The oil-free pump delivers 3.0SCFM @ 90PSI for long tool runtime and quick recovery. The compressor can be operated/stored in either the vertical/horizontal position for quick and easy space-saving around a garage or jobsite.

Product description

Made with a durable lightweight construction and convenient low noise design the Black & Decker Oil-Free Hand Carry Compressor is easy to handle and extremely portable. Includes a .75 SCFM, 135 PSI and a one gallon capacity.

The DeWalt D55140 One-Gallon, Max 135-PSI Trim Compressor is a one-person tool that offers efficiency and dependability. This indispensable hand-carry compressor features a lightweight, compact design and quiet operation for punch-out work. Ideal for finish carpenters and woodworkers, the D55140 can be used for remodeling and custom installation of shelves or other furniture, cabinet trim installation, pressure-testing new plumbing lines, and more.

The DeWalt D55140 Max 135-PSI Trim Compressor At a Glance: 2.6-Amp motor; 90 - 135 PSI Quiet 69-dB rating Durable oil-free pump Compact and portable at 24 pounds

Control panel features universal connection for use with any pneumatic tools. View larger.

Portability and quiet operation make the compressor especially versatile.

Versatile, High-Performance Compressor

Whether you're testing plumbing lines or making quick work of a remodeling project, the D55140's high-performance operation simplifies trim work and other jobs.

The D55140 features a one-gallon tank and a 2.6-amp motor that delivers 0.75 SCFM at 90 PSI and 135 PSI max, which makes for high-surge performance and quick recovery. Additionally, the draw motor offers easy startup and reduced breaker tripping, as well as a high-flow regulator that provides maximum air pressure to increase jobsite performance. And running at 69 dBA, the D55140 provides end users with a quieter operation compared to the competition.

The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for you to check or refill the pump, and it also helps keep your jobsite clean by preventing oil from transferring to your work surface.

Exceptionally Durable for Long Life

The efficient and unique design of the D55140 ensures maximum durability and longevity. DeWalt built the heavy-duty cast-iron compressor with an innovative roll cage and a full-protection frame designed to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection of key compressor components.Compact, Lightweight Design for Easy Portability

Measuring 24 pounds and with a height of just nine inches, the D55140 is ideal for those who prefer hand-carry compressors. For further convenience, DeWalt equipped the D55140 with a one-hand, universal quick connection for easy-to-use operation with any of your pneumatic tools. And for increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and with a convenient cord wrap for easy storage.

What's in the Box

135-PSI compressor and manual.

From the Manufacturer

Ideal for finish carpenters and woodworkers, the D55140 can be used for custom installation of shelves or other furniture, cabinet trim installation and for pressure-testing new plumbing lines. Performance -The D55140 produces .75 SCFM at 90 PSI, 135 PSI (Max), delivering high surge performance with quick recovery, and at 69 dBA, provides end users with a quieter operation, compared to existing compressors in the marketplace. The compressor was designed with a 2.6 amp draw motor to deliver easy start-up and reduced breaker tripping, as well as a high flow regulator that provides maximum air pressure to increase jobsite performance. The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for users to check or refill the pump, and also helps to keep the jobsite clean by preventing oil from transferring to work surfaces. Ease of Use/Portability - The compact design of this unit is ideal for end users who prefer hand carry compressors. Weighing just 24 pounds and measuring 9” wide, the compressor is easily transported and stored, making it ideal for knock-out work. In addition, DEWALT equipped the compressor with a one-hand, universal quick connect for easy-to-use operation. For increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and a convenient cord wrap for easy storage. Durability - The efficient and unique design of the D55140 ensures maximum durability and longevity. DEWALT built the heavy-duty compressor with an innovative roll cage, full-protection frame design to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection to key components of the compressor.

• Heavy-duty 1-gallon trim compressor with protective roll cage
• 135 psi maximum, durable oil-free pump, low 71 dB rating, low 2.6 amp motor
• Includes 1 compressor; hose & nailer not included
• 9-inches wide; 24 pounds; 1-year warranty

User questions & answers

Question:	Can I use 220V
Answer:	Made in USA. I.E.E.
Question:	What are the actual dimensions? The ones in the description are contradictory
Answer:	Everything we've seen on this requires it to be installed horizontally
Question:	Is this 1 gallon compressor enough to work with 3'' nail air nailer
Answer:	Not sure what the specs say. I have no problem with mine on a Dewalt with 175 psi tank pressure.
Question:	hows does it recharge
Answer:	If you put a p-trap before the rise, it will "percolate" up. It's how you get oil return going up 10 feet on walk-in coolers. If you buy a copper refrigeration trap, 7/8 refrigeration fitting is the same as 3/4 plumbing copper, 5/8=1/2" (od vs id)

Product features

DEWALT Air Compressor, 135-PSI Max

Low Maintenance, High Performance

The DEWALT Air Compressor D55140's high-performance operation makes is made to simplify jobs by powering your air tools, for construction jobs as well as for household applications. The compressor features a one-gallon tank and a 2.6 amp motor to deliver 0.75 SCFM at 135 PSI max. These features results in high-surge performance. The compressor’s high flow regulator provides maximum air pressure that enhances the performance of the machine. All of this and more at just 69 dBA, that makes it so quiet that you wouldn’t notice the compressor unless you see it.

The Oil-free operation of the Air Compression makes it easy to maintain as you will not have to worry about filling in the compressor with oil or changing the pump regularly.

Long-lasting construction

The Air Compressor’s is constructed with heavy-duty cast iron that is surrounded by a roll cage along with a full-protection frame that protects the machine from any damage. Additionally, a wrap-around Control Panel guards the unit an shields the key parts.

Lightweight and Portable

The DEWALT Air Compressor D55140 is sturdy but not bulky. The unit weighs about 24 pounds and is just nine inches in size making it extremely easy-to-carry around when in need. It is easy to connect and saves time.

Product description

The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
• Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
• Compressor is required to use this product but is not included

User questions & answers

Question:	Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need
Answer:	: A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done.
Question:	Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools
Answer:	Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use.
Question:	what is the voltage
Answer:	The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps.

Product features

DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit