14 best benchtop mill

Product description

8" LONG SHAFTS 1HP H D TOP BENCH BUFFER POLISHER GRINDER CLEANER 

All Metal and Ball Bearing Construction.

1 Horse Power Motor

7 Amp

3450 RPM

Includes:

Two 8" x 1-1/8" Thick Polishing Wheels

Overall 23" Wide and 9" Tall

Base Size is 8" x 5-3/4"

Two Mounting Holes.

4 Rubber Feet on Base to Absorb Vibration.

*GRINDING WHEELS NOT INCLUDED

*COLOR MAY VARY

• All Metal and Ball Bearing Construction.
• 1 Horse Power Motor 7 Amp 3450 RPM
• Includes: Two 8" x 1-1/8" Thick Polishing Wheels
• Overall 23" Wide and 9" Tall Base Size is 8" x 5-3/4" Two Mounting Holes. 4 Rubber Feet on Base to Absorb Vibration.
• *GRINDING WHEELS NOT INCLUDED *COLOR MAY VARY

• 1/2-Hp, 3450-Rpm Buffer'S Extended Shaft Allows More Working Area
• High-Quality 1/2-Hp Buff Motor Is The Easily Affordable Unit Rugged Enough For Everyday Use
• Extended Length And Balanced Shafts Offer More Work Space Around Wheel
• Cast Housing And Base Assure Smooth Operation, Extended Bearing Life
• 120 V 60 Hz ; 3450Rpm ; Shaft Size 5/8 Inch

User questions & answers

Question:	Will this accept a 2" wide wheel
Answer:	We Include Storage Case. Arterra Lake
Question:	You dont recommend it as a grinder? Then why does your description label it as a benchtop grinder
Answer:	Yes that is what it is for to cut steel.
Question:	Can I change out the arbors or are they fixed
Answer:	Manufacturer. We manufacture a performance upgrade belt and use the OEM part number plus SGT for Sulphur Grove Tool. ~Rick
Question:	Will this work with wire wheels for cleaning up welds and metals
Answer:	If your Craftsman requires an 80 inch blade, as mine does, it works perfectly.

Product description

The Ironton 8in. Benchtop Grinder handles heavy-duty grinding tasks, powered by a 1/2 HP, 110V motor rotating at 3,560 RPM. Equipped with two aluminum oxide wheels, each with an adjustable tool rest with eye shield for safety.

• 8in. benchtop grinder has 1/2 HP, 2.1 Amp 110V motor operating at 3,560 RPM
• Each wheel has adjustable tool rest and eye shield for safe operation
• Accepts 8in. grinding wheels with 5/8in. arbor
• Convenient rocker switch
• Includes 8in. aluminum oxide wheels for coarse and fine grinding action

Product description

Remember when you could remove material evenly and precisely? Machine perfect channels and grooves into metal, wood, plastic and more with the WEN 4.5A Variable Speed Single Phase Compact Milling Machine. This versatile 13-inch swing tool helps machinists and woodworkers alike create flat surfaces, straight holes, angled edges, slots, pockets, surface contours and more. The R8 Taper allows for compatibility with a wide variety of cutters, mills, and bits, providing users a 1/2-inch drilling capacity, a 5/8 inch end mill capacity, and a 1-1/8 inch face mill capacity. Bevel the cutter head and column 45 degrees to either the left or the right. Variable speed operation goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting to meet the needs of a wide range of material types. Our compact yet powerful design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print. Move up to 11-13/16 inches along the X-axis, 5-1/8 inches along the Y-axis, and 7 inches along the Z-axis with tooled ruler markings around each hand wheel for precise and accurate cuts. Our benchtop design gives users a sturdy and reliable heavy-duty base with pre-drilled bolt holes for increased stability. A rubber cover runs from the table to the column to help catch chips and minimize clean-up. The included transparent shield combined with the emergency stop feature provide maximum user safety during operation. And, because it’s a WEN product, your milling machine comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a robust inventory of replacement parts all to make sure you remember WEN.

• Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
• 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
• Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
• Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
• Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty

User questions & answers

Question:	Is the gears metal or plastic
Answer:	No reverse
Question:	Does it have reverse for threading
Answer:	No
Question:	Does the x and y axis have variable auto feed
Answer:	Yes
Question:	Can I do a clean face cut on a 1" aluminum 6061-T6 rectanular bar? I need +/- .005" tolerance and a chatter-free surface
Answer:	I believe it is 6.2 degrees, but I am not at my shop right now. I will double check tomorrow and get back with you but I am pretty sure it is 6.2 degrees.

Product description

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

User questions & answers

Question:	ease of putting together
Answer:	It's really easy to put together. Just took me round 5-10 minutes.
Question:	What is the maximum width of material you are drilling (from drill center to hitting the pole
Answer:	i think the varied answers come from questions getting sent to people who have purchased different sizes. I noticed some of the reviews are also for other models. This item, the WEN 4208 has an 8-inch swing. So, you can drill the center of an 8- inch diameter object, or about 4- inches from drill center to body. The WEN 4210 & the WEN 4212 have 10- inch swings. Anyone trying to drill the center of a 9- inch wheel would need one of these models. This 4208 is a Great drill for the money. i like that the head can be swung over the edge of a work bench, which allows for drilling into long stock. Like into the bottom center of a 36" post. The beveling work table is another great feature & one i did not have on the press this will replace. If you have the space, consider the WEN 4214 with 12-Inch swing. it is still small enough to be bench top, but you can drill the center of 12- inch/ bowls & table tops.
Question:	Can you rotate the drill press on this unit 90 degrees, so that it hangs off the edge of the workbench, to drill into the ends of longer pieces of stock
Answer:	Yes you can, just be careful when ever you do this.
Question:	does it drill round holes
Answer:	I only drill square holes with mine.

Product features

Powerful. Versatile. Compact.

Remember when power tools were actually powerful? WEN’s 8-inch 5-Speed Drill Press is compact enough to limit space on your work bench but powerful enough to drill through metal, wood, plastics, and more. Drill up to a 1/2-inch hole in heavy-duty cast iron. Its powerful induction motor features ball bearing construction for an extended life, providing smooth and balanced performance even at high speeds. The 1/2-inch JT33 chuck gives you versatility with a variety of bits while the worktable bevels up to 45° left and right. Constructed with a rigid frame and a cast iron head, table, and base, ensure accurate holes and convenient drilling operations every time. Remember when you could drill holes in any material with ease? Remember WEN.

Locking Depth Adjustment

Set the depth adjustment knobs to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right for precisely angled holes.

Onboard Key Storage

Place your chuck key on the attached key storage to make sure it is alway there when you need it.

1/2-inch Keyed Chuck

The JT33 chuck accepts drill bits up to a 1/2-inch in size to meet the needs of a variety of projects.

Product description

The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die-cast aluminum, houses the 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Six triple slit, hardened MICROMOT steel collets come with the machine and cover shank sizes of 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.35, 3.0, 3.2mm). The table is fitted with three T-slots of the 15/32" x 15/64" x 13/64" (12 x 6 x 5mm) MICROMOT-norm. An adjustable ruler scale eases the positioning of the work piece. All hand wheels are zero adjustable with 1 revolution = 1/32" (1.0mm), 1 division = .002" (0.05mm). Technical data: Speed 5,000 - 20,000rpm; Table Size 7 7/8" x 2 3/4" (200 x 70mm); X-Y Travel 5 17/64" and 1 13/16" (134 and 46mm); Vertical Travel 2 3/4" (70mm); Footprint Size 5 7/64" x 8 55/64" (130 x 225mm) Height 13 25/64" (340mm); Max. Power 1/8hp (100W); Volts 110 - 120V AC, 60Hz; Weight 15.5 lb (7kg)

Proxxon micro mill MF 70 - This small and beautiful unit is ideal - the accurate mill for lab, optician, jewelry, electronic and model building projects. Mill is made with a cast iron base. The vertical column and compound lathe are treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die cast aluminum, houses 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Comes with 6 triple slit hardened steel collets 1/32-Inch, 1/16-Inch, 5/64-Inch, 3/32-Inch, 7/64-Inch and 1/8-Inch (1.0, 1.5, 2.0, 2.35, 3.0 and 3.2mm) table has three T-slots and an adjustable ruler scale which eases the positioning of work-piece. All hand wheels are zero adjustable with one revolution equals 3/64-Inch (1.0mm) 1 division equals .002-Inch (0.05mm).

From the Manufacturer

Proxxon micro mill MF 70 - This small and beautiful unit is ideal - the accurate mill for lab, optician, jewelry, electronic and model building projects. Mill is made with a cast iron base. The vertical column and compound lathe are treated, high quality aluminum.

• Quiet, precise and vibration-free for fatigue free use
• Low weight and slim design, without ever compromising performance
• High quality precision tools

User questions & answers

Question:	Is it programmable
Answer:	I really don't remember if the clamps came with it or not. It did come with the complete set of collets and wrenches. I have 2 sets of clamps so maybe one set came with it, I know I had to buy the little milling vise, and a drill chuck. Everything for this machine is pretty expensive but first quality. I have a bigger milling machine now, and I will be selling my MF70, but only because it was too small for the bigger steam engines I am building.
Question:	Does the MF70 ship from Amazon with clamps to hold the work to the table
Answer:	Mine says "Made in EU"
Question:	Is this a Chinese made machine? Another website says it is from Luxembourg
Answer:	I don't think it would --the chuck will not let you get a big enough milling bit into it
Question:	Would this machine be adequate for milling AR-15 lower receivers
Answer:	5pcs/Set M3 M4 M5 M6 M8 HSS counterbore for socket head cap screws all 5 different sizes and came in separate plastic tubes used mine on aluminum worked fine

Product features

Proxxon 37110 Micro Mill MF 70

The Proxxon micro mill MF 70 does intricate and detailed tasks with ease. From lab work to tasks for opticians, jewelry and model building projects, this tool is a boon! This precision mill is easy to work with as it can be placed in a tabletop. Adjustable, portable and simple to operate, this mill makes all detailed projects hassle-free.

Stable and Adjustable

You will be able to position the mill according to the task with ease as it is engineered to provide stability at high operating speeds. Combine the ultimate utility and precision with the Proxxon 37110 Micro Mill MF 70.

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy
• The working table comes with three T shaped groove, standard size is 15x8x6mm.
• X axis travel : 200mm,Y axis travel : 50mm, Distance between grooves : 34mm
• Working table size : 310mmx90mm, Height : 80mm (including two working clamp)

User questions & answers

Question:	Is this good enough to mill a polymer 80 percent lower
Answer:	Absolutely! I used carbide cutters and got really great results.
Question:	Will this fit on a Proxxon MF
Answer:	My lathe did not come with tools or gears, the basic metric tool will work the key for spindle head, you can use an old socket tool and grind to fit
Question:	Does this read in inches
Answer:	yes,this mini power motor lathe tool kit can process metals,turning tool is high - speed steel material, can process soft, non - ferrous, precious metals,ect
Question:	Will this fit on a dremel
Answer:	You can search the CNC parts that you want to buy in our shop Jectse us, or send a picture of the product to us by email, we will help you to find this product.

Product features

Miniature precision multifunction Milling Machine Bench drill Vise Fixture worktable X Y-axis adjustment Coordinate table

Type : BG6300 working table

T solt : have three t solts

Solt size: 15mmx8mmx6mm

Mounting hole distance : two holes 93mm away from the nearest is the middle is 98mm,the distance is 112mm

Zero adjustment handwheel rotates a circle : 1.25mm.one lattice equal is 0.05mm

Apple to : Mini drill and drill bracket series and other suitable machine

• 【HEAVY DUTY CONSTRUCTION】- built by heavy duty cast iron material,which is anti-corrosion and rust resistance, angle milling table can withstand tough environment and designed for long service time.
• 【HIGH QUALITY WORKING GEAR】- Adjustable angle countertops with 3 16mm T-slots make it easy for you to place various types of tools and have more space for processing. Dimension: 12x9inch.
• 【ADJUSTABLE ANGLE PLATE】- with a crank handle, you can adjust the angle as you need. Range from 0-45 degrees (both sides), especially there is a claear dial helping to measure more precisely. Increasing the flexibility during in using.
• 【PRESICE & BETTER FINISH】- The whole adjustable angle plate surface is finely ground and chamfer the edge to come to a great processing effect.
• 【CONVENIENT CLEANING & ASSEMBLY】- We especially offer a cleaning brush and a hand wrench, it will be convenient and easy for you to clean and install it. Can be locked at any angle with the help of screws at each end.

User questions & answers

Question:	Can this go the full 90 as advertised? The scale shown stops at 50 degrees
Answer:	it comes with just one blade

Product features

Durable Material

Made of heavy duty cast iron, which is anti-corrosion and rust resistance, more durable and ensures long service time.

Machined T-slots

The milling table for 12inch length and 9inch width, with three 16 mm T-slots, are machined for a clean, precise & better finish.

Adjustable Handle

Rotary table for milling machine supplied complete with a crank handle, you can adjust the angle as you need. Range from 0-90°.

Precise Scale

Equipped with precise and clear dial, the angle can be adjust by accurately measuring according to the needs of processing.

Better Ground Finish

The bottom surface of the work table is finely ground, better cooperate with the machine tool, making the machining more precise.

Convenient Accessories

The tilting table equipped with a cleaning brush and wrench, it will be easy for you to clean and install it.

Adjustable Tilting Milling Table

This tilting table for milling machine which made of heavy-duty cast iron can be adjusted from 0-45 degrees (both sides), with 3 T-slots (16mm）, a crank handle and precise ground finish, it is a perfect tool to improve your milling processing.

Product description

Remember when you could make fine-tune adjustments with the simple turn of a wheel? the WEN 4.25-Inch tilting vise provides 90 degrees of stable and reliable clamping action. Great for Incremental drilling and precision work. With a locking cradle and positive work stops every 15 degrees (0, 15, 30, 45, 60, 75, and 90 degrees), this vise is the perfect companion for your Benchtop, your drill Press, your work Table, and more. Made from heavy duty powder-coated cast iron, the WEN tilting vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25-By-1.75-Inch jaws open up to 4.25 inches wide. The fixed jaw features a v-shaped Groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2-inch mounting brackets positioned around the outside edge of the vise's base, the WEN angled vise is compatible with the majority of drill Press tables on the market, including the WEN 4210 and 4212 10-inch drill presses, the WEN 4214 12-inch drill Press, the WEN 4225 15-inch drill Press, and the WEN 4227 17-inch drill Press. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• 4.25 by 1.75 inch jaws open up to 4.25 inches wide
• Constructed of industrial-strength powder-coated cast iron
• Features 7 positive tilting stops; one every 15 degrees from 0 to 90
• Five 1/2-inch mounting brackets allow for compatibility with the majority of drill press tables on the market
• Compatible with the WEN 10-Inch, 12-inch, 15-Inch, and 17-Inch drill presses

User questions & answers

Question:	Does anyone know if this will fit on the fordom drill press? That uses the flex shaft as a motor
Answer:	For milling small parts you should be ok.
Question:	is compatible whit Wen 4208 8 in
Answer:	no pads on the jaws
Question:	Do you think this is rigid enough for a milling machine
Answer:	No much I’m afraid. You can check at Technatools and Pen State Industries for a Spindle adapter that goes from the chuck to a 18mm threaded spindle. If you are in the US it may be harder to find. Both technatoole and PSI are sold here on Amazon.
Question:	Will the face pads come off
Answer:	If it is 1” 8 TPI it will fit. Please double check the specs at Harbor Freight. I’m not sure if the small lathe is 1” 8 TPI.

Product description

MINIQ BG6350 Compound Slide Table Multifunction Drill Vise Fixture Working Table Mini Precision Milling Machine Worktable - The BG6350 is more stable one than the BG6330&BG6300, it uses 2pcs 14mm (M14*3) lead screws, 4pcs 13mm Cylinder Liner Rails, and 8pcs SC13UU linear motion ball bearing slide bushings make this worktable guarantee the minimum space and ensure the accuracy better than the 6330&6300.

- It is the same size as the 6330 one that it uses more solid aluminum alloy material to make the end cap, it can make the plane rotates more flexible.

- The base and the flexible table have the rigid structure being more strengthen than 6300, and the screw rod (M10x2) is more stronger than before, so it can be used for higher

- standard of usage. Specification: Model: BG6350 Table size: 350*100mm Adjustable for X direction: 180mm Adjustment for Y direction: 50mm X Y-axis scale adjustment: 1 circle = 3mm A subdivision marks= 0.05mm The lead screws are M14x3

Apple to : Mini drill and drill bracket series and other suitable machine 。

Features: 1. The table is suitable for Mini Drill and drill bracket series. 2. It can also apply to other suitable machine.

3. The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy.

4. The working table with three T shaped groove, standard size is 15x8x6mm.

5. Scale is in front of the movable positioning.

6. adjustment handwheel rotates a circle of 3mm. A lattice is equal to 0.05mm.

7. The X axis Y axis distance is 180mm, the stroke is 50mm.

8. Working table size is 350x100mm and the height of 122mm, including two working clamp.

9. Mini multifunctional working table 6350,The table is suitable for mini drill and drill bracket series.

10. It can also be applied to other suitable machines.

• Table size: 350 × 100mm. Hand wheel with adjustable scale:A ring=1.5mm.
• Zero adjustment handwheel rotates a circle of 1.25mm. A lattice is equal to 0.05mm.
• Adjustment in X direction: 180mm. Adjustment in Y direction: 50 mm. Distance between grooves : 34mm
• The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.
• The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.

User questions & answers

Question:	Will this work for a 80% lower reciver
Answer:	Yes ! This worktable can do it ! if you have any problem about the produce ! please you email us ! we will give you a full settlement. Thanks for your understanding ! Have a nice day and best regards ! Kind regards !
Question:	What tolerances should I expect
Answer:	Tolerances about 0.5mm-1MM. If you have any problem about the produce , please you email us ! we will give you a full settlement. Thanks for your understanding ! Have a nice day and best regards ! Kind regards !
Question:	Has anyone that bought this tried using it for light gunsmithing jobs
Answer:	I doubt that it is rigid enough for quality work. I bought this because it's lightweight. It's easy for a 70 year old to use, but it's not strong like the Grizzly. I did get some chatter just milling untempered aluminum. I bought the heaviest (most expensive) version of this little table.
Question:	What is the base made out of
Answer:	The base is made out of cast iron ! if you have any problem about the produce ! please you email us ! we will give you a full settlement. Thanks for your understanding ! Have a nice day and best regards ! Kind regards !

User questions & answers

Question:	can i use this to mill some gun parts like 80% AR15 lower
Answer:	There is not a stand specifically made for the milling machine. The manual states to secure the milling machine to a flat surface working table.
Question:	Do they make or recommend a stand for this machine
Answer:	Check littlemachineshop.com they do carry it and it is very inexpensive
Question:	Do you carry the plastic gear that mounts under the motor
Answer:	This mini milling machine has a 110V motor which is rated a 1/2 HP.
Question:	The description says 3/4hp for the motor, but 350 watts. 350 watts is approximately 1/2hp. Which is it
Answer:	Steel I believe

Product features

Features + Benefits

• 3 5/8in. x 15 3/8in. work table with 8 5/8in. longitudinal travel and 4in. cross travel
• 7in. headstock travel
• Fine down feed control for accurate tool height setting
• 1/2in. drilling capacity, 5/8in. end mill capacity and 1 3/16in. face mill capacity
• Has R8 spindle, collet and drawbar
• Suitable for different size R8 collets (not included): 1/8in., 3/16in., 1/4in., 3/8in., 5/16in., 9/16in., 1/2in. and 5/8in.
• Delivers 100–2,500 RPM
• Requires 5 Amps
• Longitudinal axis (X): 220mm; Cross axis (Y): 100mm; Headstock travel (Z): 180mm; Throat: 167mm; Table effective size: 390x92mm; T-slot size: 12mm

Product description

Specification:

Display: LCD

Axis style: 3 Axis

Supply Voltage range : AC 80V?250V / 50HZ?60HZ

Power consumption: 15VA

Operating temperature: 0~45 degree centigrade

Storage temperature: -30~70 degree centigrade

Relative humidity: Less than 90%

Readout allowable input signal: TTL square wave

Allowable input signal frequebcy: Less than 5M Hz

Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um.

Min resolution of digital display angle :0.0001/pulse

Digital Readout Dimensions: 290x185x75mm (11.4"x7.3"x3")

Linear Scale Interface: DB9(TTL)

Display Advantage: Having a good capacity of resisting disturbance,durable keyboard,easy to change

SDM 200 sets memory, power-off memory for 10years , circumference drilling, oblique line drilling, 1/2 centering

PCD function

R function

Smooth R function

The simple R function

Chambering (applicable to: Milling machine,Boring machine)

Tool conpensation (for lathe)

Machining of oblique plane

Also a calculator is equipped for more convenient usage



DRO Digital Readout Display System Functions:

1:Zero clearing

2:Reset

3:mm/inch mode

4:ABS/INC coordinate conversion

5: 200sets sub datum

6:Power off Memory;

7:Center of 1/2

8:Liner error compensation

9:Sleepping mode

10:Clear 200 sets Sdm datum;

11:ABS/INC mode

12:Calculator

13:Drilling of circumference

14:Drilling of oblique line

15:Machining of inclined plane

16:Machining of circular arc

17:Lathe function(match)

18:Rectangular lumen gradual processing

19:Digital filtering

20:Vibration filtering

21:Radius /Diameter fucntion

22: Lathe function



Package Included :

1 x Digital Readout

1 x Mounting accessories

• [3 Axis LCD Readout] This kind of DRO is commonly fitted to machines, especially for metal working lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools to allow the operator to work faster and with greater accuracy.
• [Accuracy] Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um; Min resolution of digital display angle :0.0001/pulse, Linear Scale Interface: DB9(TTL).
• [Multifunction] The digital readout display meter system is equipped with a variety of intelligent functions: SDM 200 sets memory, power-off memory, circumference drilling, oblique line drilling, 1/2 centering, etc. Also a calculator is equipped for more convenient usage.
• [Professional Design] Signal line is protected by multi-layer isolating wire and metal soft shell. Display screen have a good capacity of resisting disturbance, durable keyboard, easy to change.
• [Application] Fits for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement, mechanical control as well as other area of linear scale and rotary encoder.

User questions & answers

Question:	will this dro show bolt circle and position graphically on screen
Answer:	no
Question:	How can I get a manual to review and compare features and functions with others
Answer:	Hello, dear friend, Thank you for your love of our products, please rest assured that this product contains manual, you will receive it after the purchase, thank you for your understanding! Welcome to buy! Have a good day! Best Regards!
Question:	Will this work with my acu-rite glass scales ? my scales are good .0005; millmate dro quit working. plugs are trapezoid shape
Answer:	Hello, dear friend, Very sorry, we don’t know what your glass scale looks like, so we can’t give you an answer. You can contact the buyer directly through the product link page and provide a picture of your glass scale. We will give you an answer. Thank you for your understanding! Have a good day! Best Regards!

Product description

This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.

Features:

Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).

Aluminum alloy base.

Gear drive without belt design, power strong.

Power-off switch for added safety.

Can be widely used model, wood boards, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling. This is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.

Specifications:

Plug: US (optional)



Spindle Speed: 0-2800r/min

Drill Clamping Diameter: 1-13mm / 0.04-0.51in

Input Power: 710W

Spindle Travel: 60mm / 2.36in

Voltage: 110-220V, 50-60Hz

Drill Capacity: Woods: Ï30mm

Iron: Ï8mm

Working Radius: 110mm / 4.33in

Material: aluminum alloy

Item Weight: 6000g / 12.22b

Package Weight: 6100g / 12.36lb

Package Size: 480 * 290 * 150mm / 18.90 * 11.42 * 5.91in

Note:

Please allow 10-30mm error due to manual measurement and make sure you do not mind before ordering.

The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.

Package List:

1 * Bench Drill

1 * English Manual

• Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling.
• Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
• This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
• Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).
• Aluminum alloy base.

User questions & answers

Question:	How many Amps
Answer:	710 Watts at 220 Volts (710 / 220) = 3.22 Amps
Question:	The description says the voltage is 110-220v and 50-60hz.. but my unit's faceplate says 220v 50hz. Will damage happen at 110v 60hz
Answer:	No risk of damage. However it will only run in the very top "range" and then only at less that half speed. The motor is NOT designed to be run on US standard 110 Volt 60 Hz power.
Question:	Does this have a reverse function
Answer:	NO , The machine donot have a reverse function !
Question:	Does it have a half inch chuck
Answer:	Drill Clamping Diameter: 1-13mm / 0.04-0.51in Drill Capacity: Woods: Ï30mm Iron: Ï8mm Working Radius: 110mm / 4.33in

Product description

Overview



Genmitsu 3018-PROVer is the successor to the 3018-PRO, and the new version has brought improvements to many parts, including the excellent design and safety features, pre-assembly, upgraded mainboard, etc. It's perfect for CNC beginners, hobbyists, and small business owners.



SPECIFICATION



Effective Engraving Area: 260 x 155 x 35mm(10.2 x 6.1 x 1.4”)

Frame Size: 400 x 330 x 240mm(15.7 x 13.0 x 9.4”)

Frame Material: Aluminum

Z-Axis Component Material: ABS

Spindle: 775 motor, 12V~24V, 10000 RPM;

Rated power: 60W; Maximum power: 120W

Step Motor: 1.3 A, 12V, 0.25 Nm torque (2.2 in-lb)

Drill Bits: Tip 0.1 mm, 20 degrees, Diameter 3.175 mm

Supported OS: Windows XP, Windows 7 32/64 bits, Windows 8, Windows 10, Linux, MAC OS

Software: Grbl control(Candle)

Power Supply: 24V/5A, with CE, FCC & PSE certifications

Perfect for: Hobbyists, Crafters, Woodworkers, Industrial Designers, Educators, Engineers, Jewelers and more!



WHAT'S INCLUDED?



1 x 3018-PROVer CNC Router Machine (Some parts need to be assembled)

1 x Tools Box

1 x Screw/Nut Accessories Box

1 x Offline Control Module

• Class leading value got even easier to use.
• The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 30 minutes out of the box.
• Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.
• Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.
• Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for immediate shutdown of your machine.

User questions & answers

Question:	What is the cost of the software and what do I need
Answer:	You can get free software. I grbl is free to convert STL to GCODE. Anything that can generate a STL file will work.
Question:	Does the 3018-prover come with clamps? i don't see any pictured or mentioned
Answer:	There are some basic clamps that use bolts placed in the t-track of the bed.
Question:	Second question. Can this be used as a pass through to do longer pieces than the surface? Making wood onlays. Need narrow, but longer than work area
Answer:	Yes
Question:	Is this too loud for someone living in an apartment? Is it quieter like a Dremel, or more like a more powerful power tool
Answer:	I have this in an apartment and I run it as part of a business. The noise level depends on what you are doing with it. When doing light engraving it's not too bad. However, when cutting/milling with a spiral up-cutting bit or doing a deeper v groove/engraving, it is quite loud and it is even louder now that I have the 20000 RPM spindle (highly recommended for proper feeds/speeds by the way). As Brian mentioned, the dust is an issue as well. To address both of these issues, I built an enclosure similar to the one by James Dean Designs; however mine is simpler and lined with pink insulation foam that I cut into sound foam with a larger V bit. This contains the dust and noise for the most part. I also had to put extra TPU feet under the machine inside the enclosure to dampen the vibrations. Even with these precautions I only run my PROVer during business hours for noise reasons. The only problem with the enclosure is that is makes it a bit difficult to reach the sockets in the back if you are going to be switching between and spindle and laser engraver. IF YOU BUILD AN ENCLOSURE BE SURE TO MOUNT THE EMERGENCY STOP BUTTON ON THE OUTSIDE.

Product features

Efficient Pre-assembly

The 3018-PROVer is the newest addition to the Genmitsu CNC 3018 series family. This pre-assembled desktop CNC machine allows you to be up and running in 30 minutes instead of 2 hours, making it no challenge for beginners.

Safety Design

The 5mm acrylic baffles can block the 'flying' pieces of wood/other cutaway materials so that you can safely monitor the engraving process.

Offline Controller with 1.8" TFT LCD Display

This machine comes standard with a newly designed offline controller with 1.8" display so you can view readouts clearly and control the CNC router without connecting to a computer.

High Quality

Boasts an all-aluminum body with an oxide blue look, the 3018 PROVer gives you a premium look and feel for your machine.