14 best mini milling machines

User questions & answers

Question:	can i use this to mill some gun parts like 80% AR15 lower
Answer:	There is not a stand specifically made for the milling machine. The manual states to secure the milling machine to a flat surface working table.
Question:	Do they make or recommend a stand for this machine
Answer:	Check littlemachineshop.com they do carry it and it is very inexpensive
Question:	Do you carry the plastic gear that mounts under the motor
Answer:	This mini milling machine has a 110V motor which is rated a 1/2 HP.
Question:	The description says 3/4hp for the motor, but 350 watts. 350 watts is approximately 1/2hp. Which is it
Answer:	Steel I believe

Product features

Features + Benefits

• 3 5/8in. x 15 3/8in. work table with 8 5/8in. longitudinal travel and 4in. cross travel
• 7in. headstock travel
• Fine down feed control for accurate tool height setting
• 1/2in. drilling capacity, 5/8in. end mill capacity and 1 3/16in. face mill capacity
• Has R8 spindle, collet and drawbar
• Suitable for different size R8 collets (not included): 1/8in., 3/16in., 1/4in., 3/8in., 5/16in., 9/16in., 1/2in. and 5/8in.
• Delivers 100–2,500 RPM
• Requires 5 Amps
• Longitudinal axis (X): 220mm; Cross axis (Y): 100mm; Headstock travel (Z): 180mm; Throat: 167mm; Table effective size: 390x92mm; T-slot size: 12mm

Product description

The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die-cast aluminum, houses the 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Six triple slit, hardened MICROMOT steel collets come with the machine and cover shank sizes of 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.35, 3.0, 3.2mm). The table is fitted with three T-slots of the 15/32" x 15/64" x 13/64" (12 x 6 x 5mm) MICROMOT-norm. An adjustable ruler scale eases the positioning of the work piece. All hand wheels are zero adjustable with 1 revolution = 1/32" (1.0mm), 1 division = .002" (0.05mm). Technical data: Speed 5,000 - 20,000rpm; Table Size 7 7/8" x 2 3/4" (200 x 70mm); X-Y Travel 5 17/64" and 1 13/16" (134 and 46mm); Vertical Travel 2 3/4" (70mm); Footprint Size 5 7/64" x 8 55/64" (130 x 225mm) Height 13 25/64" (340mm); Max. Power 1/8hp (100W); Volts 110 - 120V AC, 60Hz; Weight 15.5 lb (7kg)

Proxxon micro mill MF 70 - This small and beautiful unit is ideal - the accurate mill for lab, optician, jewelry, electronic and model building projects. Mill is made with a cast iron base. The vertical column and compound lathe are treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die cast aluminum, houses 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Comes with 6 triple slit hardened steel collets 1/32-Inch, 1/16-Inch, 5/64-Inch, 3/32-Inch, 7/64-Inch and 1/8-Inch (1.0, 1.5, 2.0, 2.35, 3.0 and 3.2mm) table has three T-slots and an adjustable ruler scale which eases the positioning of work-piece. All hand wheels are zero adjustable with one revolution equals 3/64-Inch (1.0mm) 1 division equals .002-Inch (0.05mm).

From the Manufacturer

Proxxon micro mill MF 70 - This small and beautiful unit is ideal - the accurate mill for lab, optician, jewelry, electronic and model building projects. Mill is made with a cast iron base. The vertical column and compound lathe are treated, high quality aluminum.

• Quiet, precise and vibration-free for fatigue free use
• Low weight and slim design, without ever compromising performance
• High quality precision tools

User questions & answers

Question:	Is it programmable
Answer:	I really don't remember if the clamps came with it or not. It did come with the complete set of collets and wrenches. I have 2 sets of clamps so maybe one set came with it, I know I had to buy the little milling vise, and a drill chuck. Everything for this machine is pretty expensive but first quality. I have a bigger milling machine now, and I will be selling my MF70, but only because it was too small for the bigger steam engines I am building.
Question:	Does the MF70 ship from Amazon with clamps to hold the work to the table
Answer:	Mine says "Made in EU"
Question:	Is this a Chinese made machine? Another website says it is from Luxembourg
Answer:	I don't think it would --the chuck will not let you get a big enough milling bit into it
Question:	Would this machine be adequate for milling AR-15 lower receivers
Answer:	5pcs/Set M3 M4 M5 M6 M8 HSS counterbore for socket head cap screws all 5 different sizes and came in separate plastic tubes used mine on aluminum worked fine

Product features

Proxxon 37110 Micro Mill MF 70

The Proxxon micro mill MF 70 does intricate and detailed tasks with ease. From lab work to tasks for opticians, jewelry and model building projects, this tool is a boon! This precision mill is easy to work with as it can be placed in a tabletop. Adjustable, portable and simple to operate, this mill makes all detailed projects hassle-free.

Stable and Adjustable

You will be able to position the mill according to the task with ease as it is engineered to provide stability at high operating speeds. Combine the ultimate utility and precision with the Proxxon 37110 Micro Mill MF 70.

Product description

MINIQ BG6350 Compound Slide Table Multifunction Drill Vise Fixture Working Table Mini Precision Milling Machine Worktable - The BG6350 is more stable one than the BG6330&BG6300, it uses 2pcs 14mm (M14*3) lead screws, 4pcs 13mm Cylinder Liner Rails, and 8pcs SC13UU linear motion ball bearing slide bushings make this worktable guarantee the minimum space and ensure the accuracy better than the 6330&6300.

- It is the same size as the 6330 one that it uses more solid aluminum alloy material to make the end cap, it can make the plane rotates more flexible.

- The base and the flexible table have the rigid structure being more strengthen than 6300, and the screw rod (M10x2) is more stronger than before, so it can be used for higher

- standard of usage. Specification: Model: BG6350 Table size: 350*100mm Adjustable for X direction: 180mm Adjustment for Y direction: 50mm X Y-axis scale adjustment: 1 circle = 3mm A subdivision marks= 0.05mm The lead screws are M14x3

Apple to : Mini drill and drill bracket series and other suitable machine 。

Features: 1. The table is suitable for Mini Drill and drill bracket series. 2. It can also apply to other suitable machine.

3. The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy.

4. The working table with three T shaped groove, standard size is 15x8x6mm.

5. Scale is in front of the movable positioning.

6. adjustment handwheel rotates a circle of 3mm. A lattice is equal to 0.05mm.

7. The X axis Y axis distance is 180mm, the stroke is 50mm.

8. Working table size is 350x100mm and the height of 122mm, including two working clamp.

9. Mini multifunctional working table 6350,The table is suitable for mini drill and drill bracket series.

10. It can also be applied to other suitable machines.

• Table size: 350 × 100mm. Hand wheel with adjustable scale:A ring=1.5mm.
• Zero adjustment handwheel rotates a circle of 1.25mm. A lattice is equal to 0.05mm.
• Adjustment in X direction: 180mm. Adjustment in Y direction: 50 mm. Distance between grooves : 34mm
• The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.
• The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.

User questions & answers

Question:	Will this work for a 80% lower reciver
Answer:	Yes ! This worktable can do it ! if you have any problem about the produce ! please you email us ! we will give you a full settlement. Thanks for your understanding ! Have a nice day and best regards ! Kind regards !
Question:	What tolerances should I expect
Answer:	Tolerances about 0.5mm-1MM. If you have any problem about the produce , please you email us ! we will give you a full settlement. Thanks for your understanding ! Have a nice day and best regards ! Kind regards !
Question:	Has anyone that bought this tried using it for light gunsmithing jobs
Answer:	I doubt that it is rigid enough for quality work. I bought this because it's lightweight. It's easy for a 70 year old to use, but it's not strong like the Grizzly. I did get some chatter just milling untempered aluminum. I bought the heaviest (most expensive) version of this little table.
Question:	What is the base made out of
Answer:	The base is made out of cast iron ! if you have any problem about the produce ! please you email us ! we will give you a full settlement. Thanks for your understanding ! Have a nice day and best regards ! Kind regards !

Product description

The table is suitable for Mini Drill and drill bracket series.

It can also apply to other suitable machine.

The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy

Table size: 365 × 200 mm. Weight: 6.8 kg

X axis distance is 350 mm. Y axis distance is 100 mm.

Hand Wheel Scale Per Ring is 3 mm.



Package includes:

1 Pc of Milling table of Heavy Version

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• It can also apply to other suitable machine. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
• Table size: 365 × 200 mm. Weight: 6.8 kg
• X axis distance is 350 mm. Y axis distance is 100 mm. Hand Wheel Scale Per Ring is 3 mm.

User questions & answers

Question:	What is the actual X-axis travel distance for the heavy version
Answer:	3.0625" overall height (3 1/16")
Question:	Why does the medium model have more X &Y travel than the large model
Answer:	metal
Question:	What is the length and width of the cast iron base
Answer:	Thank you raising your concerns. The 2.5" milling vise is not included. You will need to purchase another 2.5" milling vise. What You Get: Milling Working Cross Table *1; Accessories box *1(hexagon wrench *1, standard fixture *1, M8 bolts and nuts *2); Manual *1. Any question, please don’t hesitate to let me know. Thank you for your attention to this product.
Question:	As this unit sits on a bench. What is the approximate height from the bench to the top of the table? Thanks
Answer:	I bought my clamps at harbor freight and Grainger supply

Product description

• Control software: Grbl Control/Candle; Interface: USB; System requirements: windows XP SP3, win7. (32/64 can be). Linux; Can't support Apple product
• The machine for a full set of spare parts, shall be installed by the buyers,the package include the CD with detailed user manual, buyers don‘t need to worry about machine assembly.
• GRBL control board does not support updating software or refreshing firmware, otherwise the control board will be damaged.
• Main applications: Can engrave materials such as plastic, wood, acrylic, PVC, PCB, wood.

Product features

Specification

• Profile Dimensions: 260x240x220mm
• Travel (engraving range): 160x100x45mm
• Table size: 180x100mm
• Screw: Professional T8 screw, lead 4mm, double copper nuts eliminate the poor back
• Stepper motor: 42 stepper motor
• Voltage: 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
• Spindle: 775 spindle motor (12-36V) 24V: 7000r / min, 36V: 9000r / min
• Power: 24V 5A power adapter (input voltage 110-240V), simple and convenient
• System requirements: windows XP SP3, win7. (32/64 can be). Linux
• Drill bits: tip 0.1mm ,20 degree , diameter 3.175mm

GRBL control 1.1f USB port CNC engraving machine control board

• Connection: USB (USB-CH340)
• Software: GRBL control/Candle
• Input voltage: 12-36V
• Master chip: atmel 328P
• Stepper motor driver: A4988
• Spindle drive chip: MOSFET (recommendation 12~36V, current : within 10A )
• Spindle PWM speed: Support
• Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)
• Power Interface: 5.5-2.5mm DC interface
• Main application:Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material

User questions & answers

Question:	Is there a metric set available
Answer:	That's exactly what I used this set for my 80% arms lower receiver. Completed it last week with a Deltron upper and tested it at the range yesterday. Take your time and go slow and it will produce a quality part. Predrill holes with a drill bit. I did the whole process using these to finish with.
Question:	will this set be able to drill my AR15 lower receiver
Answer:	Two or three flute center cutting end mill most 4 flute are not center cutting and will go a horrible job. Two flute end mills in very sharp condition best done on a larger heavy duty drill press 12 inches or more swing. The Quill arbor and bearings need to be tight with minimal slop. Drill press needs to be capable of low speed to avoid chatter. If things are optimal it "may work" any vertical mill even a mini mill will do a better job for this milling operation.
Question:	In drill press, how will they do for plunge cutting? I was under impression I need center cut end mill for boring metal, am I wrong
Answer:	I have been using the 1/4 and 3/8 bits for mortising in cherry wood, they are excellent at that - clean cut, not much vibration, stay sharp longer than other he's spiral bits.
Question:	Are these suited for wood as well
Answer:	End mills don't really have a cutting depth. The general rule is to never plunge more than 1/2 the diameter of the mill. That said this is a nice starter set of end mills. Great for brass and aluminum. Go slow with steel. Use plenty of lube.

Product features

Dimensions

Widely Application

• 4 flutes end mill can be used on many fields, such as metal,wood ,aluminum processing, CNC machining and engineering using, ideal for peripheral and finish milling.
• Suitable for lathes, milling machines, bench drills.drill press and etc.

Product description

Milling Machine Bench drill Vise Fixture worktable X Y-axis adjustment Coordinate table Feature: Type : 6300 working table T solt : have three t solts Solt size: 15mmx8mmx6mm

User questions & answers

Question:	What is the dimension from the bottom of the base to the top of the table
Answer:	I weighed mine on a cheap bathroom scale - 55 pounds.
Question:	Is the green base aluminum or plastic
Answer:	9 inches, just went and measured mine
Question:	Is the 2 1/2” vice named and pictured included with this purchase
Answer:	Just measured the slot is 0.45” wide.
Question:	Where can I get a set of clamp jaws to fit this table
Answer:	I had the 4” version, meaning 4” wide jaws that open 4” or more. I sent mine back because the base was HUGE. No way to bolt it to the bed of my small mill.

Product description

• Please dowmload the files form here: https://drive.google.com/drive/folders/1rjUtawvg5VgDPTFGfN-OBi1DF7kUrPhl?usp=sharing
• GRBL control board does not support updating software or refreshing firmware, otherwise the control board will be damaged.
• System requirements: Windows XP SP3; Win7 (32/64 can be); Linux; Can't support Apple system
• The machine for a full set of spare parts, shall be installed by the buyers,the package include the U Disk with detailed user manual, buyers don‘t need to worry about machine Assembly.
• Main application:Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.

User questions & answers

Question:	Since this just takes G-Code, why doesn't it support anything above Windows
Answer:	The compatibility of the win10 system is very poor, the GRBL control board and the window10 system may not be compatible, and unknown (unsolvable) problems may occur. In order to ensure a good shopping experience for buyers, we have made a reminder.

Product features

CNC 1610Pro

• Dimensions: 30*26*25cm (including motor and other protrusions)
• Machine net weight: 5kg
• Guide rail diameter: 10mm
• Stepper motor: 42 stepper motor 1.3A/0.3N.m
• Maximum stroke: 18*10*4.5cm
• Table size: 18*10cm
• System support: Windows XP/7;Linux
• Power supply parameters: AC110-240V
• Control system:grblcontrol, USB interface

GRBL1.1f Control Board

• Support limit switch, tool setting, steering gear, cooling fan and other functions
• The spindle supports 0-100% adjustable PWM power.
• Support PWM / TTL signal control, power 0-100% adjustable!
• Increase the power button switch (this switch is the control signal of the power supply, no large current passes through the switch, don't worry about the size of the switch)
• Cancel the drive module, integrate the imported stepper motor drive, and comes with short circuit protection, no need to worry about module damage. And integrated heat dissipation aluminum alloy.
• Add offline recognition function, you can insert offline module and computer at the same time. The machine will automatically recognize whether it is controlled by the computer.
• Enhanced spindle drive. It can support 20,000 rpm spindle. Support higher power spindle.

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy
• The working table comes with three T shaped groove, standard size is 15x8x6mm.
• X axis travel : 200mm,Y axis travel : 50mm, Distance between grooves : 34mm
• Working table size : 310mmx90mm, Height : 80mm (including two working clamp)

User questions & answers

Question:	Is this good enough to mill a polymer 80 percent lower
Answer:	Absolutely! I used carbide cutters and got really great results.
Question:	Will this fit on a Proxxon MF
Answer:	My lathe did not come with tools or gears, the basic metric tool will work the key for spindle head, you can use an old socket tool and grind to fit
Question:	Does this read in inches
Answer:	yes,this mini power motor lathe tool kit can process metals,turning tool is high - speed steel material, can process soft, non - ferrous, precious metals,ect
Question:	Will this fit on a dremel
Answer:	You can search the CNC parts that you want to buy in our shop Jectse us, or send a picture of the product to us by email, we will help you to find this product.

Product features

Miniature precision multifunction Milling Machine Bench drill Vise Fixture worktable X Y-axis adjustment Coordinate table

Type : BG6300 working table

T solt : have three t solts

Solt size: 15mmx8mmx6mm

Mounting hole distance : two holes 93mm away from the nearest is the middle is 98mm,the distance is 112mm

Zero adjustment handwheel rotates a circle : 1.25mm.one lattice equal is 0.05mm

Apple to : Mini drill and drill bracket series and other suitable machine

Product description

Product Description

Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill

Description：

The table applies to mini bench drill and drill bracket series.

It can also be applied to other suitable machine.

The bench is made up of several adjustable dovetail aluminum alloy,

We can guarantee a minimum of space and to ensure accuracy.

Specifications：

Material: Aluminium Alloy

Size: 310 * 90mm * 80mm

X-Route: 200mm

Y-Route: 50mm

Distance of grooves: 34mm

T-slot size: standard size slot is 15X8X6mm

Scale travel: 1.25mm (circle), 0.05mm (one cell)

Packing List：

1 * Worktable

• ★The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• ★The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy
• ★The working table comes with three T shaped groove, standard size is 15x8x6mm.
• ★X axis travel : 200mm,Y axis travel : 50mm, Distance between grooves : 34mm
• ★Working table size : 310mmx90mm, Height : 80mm (including two working clamp)

• New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
• Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
• Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
• Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
• Simple Assembly: Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise.

User questions & answers

Question:	Can it engrave medallion/ medals? Are they consider soft aluminum ( Zinc Iron
Answer:	Kit comes with all parts (extrusions, acrylic, T-nuts, etc). to make the CNC enclosure as pictured. Don't need to get any other parts.
Question:	Can this CNC machine carve brass with the appropriate bits
Answer:	The front wall is 4mm, and others are 3mm. The top open is for connecting power cord/ USB cable and replace engraving materials conveniently.
Question:	How do I order the laser module
Answer:	Yes. There is a hole in the corner about 1" by 1.5"
Question:	Will this work with Fusion
Answer:	There is a video - not complicated

Product features

The Genmitsu CNC

Designed for the absolute beginner, the Genmitsu is a great tool for starting CNC learning. If wood-working is your hobby, you can use it to add features like curved words and exquisite patterns. If you are a student just learning CNC, it can help you engrave models that you are coding and designing.

You will find the SainSmart Genmitsu an excellent self-learning tool that allows you to DIY your great projects on a cost-effective platform without the risk of damaging expensive equipment.

Upgraded Power Adapter

The reoptimized power adapter comes with CE, FCC & UL certifications, with over-voltage protection, over-current protection, over-temperature protection, and short-circuit protection. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.

Offline Control

The offline controller module allows you to control the CNC router remotely without connecting to the computer. Your CNC router can be placed wherever you want, such as garages and workshops.

Redesigned Mainboard

Equipped with ABS case and fan, the performance and stability of the new mainboard have been greatly improved.

Open Source

It’s built on Arduino and Grbl (both open source). You could easily find support, tutorials, additional training, and inspiration elsewhere online.

Versatile

With a 1.8-inch effective engraving depth, the Genmitsu 3018-PRO is capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, and a wide range of other materials.

WHAT'S IN THE BOX

1 x 3018 PRO DIY Router Kit

1 x Extension Rod with ER11 Collet (3.175mm)

4 x Plate Clamps

10 x CNC Router Bits (Cutting Angle: 20 Degree; Shank Diameter: 3.175mm; Tip Diameter: 0.1mm)

1 x Offline Controller

1 x Power Supply

1 x English Manual

1 x CD

Product description

Specification:

Model: TZ20005M

Motor Speed :12,000rpm

Input voltage/current/power:12VDC/5A/60W

Axis Y and Z Travel: 32mm

Axis X Travel: 145mm

Collet: 1-6mm

Maximum Clamping Size of Vice: 50mm

Working Material: Lignin plastic, soft metal (gold, silver, copper, aluminum etc.), acrylic, plastic, etc

Package Weight: Approx. 5210g/183.8oz



Package list:

1 * Mini Lathe

1 * Power Adapter

1 * Set of Accessories

1 * Bottom Plate

1 * User Manual



Note:

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

• ✱✱✱Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal.
• ✱✱✱Maximum motor power is 144W by using more powerful motor. Make sure that you pick up the right size.
• ✱✱✱Motor case and headstock are jointed without any complex installation and assembly steps.
• ✱✱✱With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining.
• ✱✱✱Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it.

Product description

User questions & answers

Question:	This cnc router does not support windows
Answer:	The compatibility of the win10 system is very poor, the GRBL control board and the window10 system may not be compatible, and unknown (unsolvable) problems may occur. In order to ensure a good shopping experience for buyers, we have made a reminder that This cnc machine does not support windows 10 system.

Product description

Features

- High-precision, stability, low noise.

- Designed for the home DIY enthusiasts, small and portable, strong power.

- Large torque ball bearing motor.

- Suitable for all small square or cylindrical timbers such as Pterocarpus santalinus, dalbergia odorifera, Thuja sutchuenensis, etc.

Specifications

Power:200W

Maximum processing length:140mm

Maximum processing width:50mm

Material: aluminum alloy

Maximum processing thickness 50 mm

Product size:310*60*65mm

Work way:manual

Voltage:DC12-24V

Adapter:

Input:110V-24V AC~50/60Hz 1.3A Max

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max

Adapter size:113*53*35mm

Package Included:

1x adapter

1x machine

1x 50mm Diamond Cutting Blade

1x 50mm HSS Cutting Piece

1x polishing wheel

5x sandpaper

1x caliper

1x grinding rod

3x drill

1x cable

6x carving blade

1x diamond blade connecting joint

1x high speed steel blade connecting joint

1x drill chuck wrench

1x Allen wrench

1x beads fixed needle 1.5/2.0/ 2.5MM

1x thread fixed needle

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Super large torque ball bearing motor, maximum rotating speed up to 8000RPM providing ultra strong cutting power with low noise, you can use it at home.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.

User questions & answers

Question:	Can this be used in making wood turned pens
Answer:	It comes with the pieces to be able to perform all the functions that it displays, yes, however the size is on such a small scale that you are putting way more effort into trying to use this than you are getting out of it. This wasn't good for anything that I purchased it for, and isn't adaptable to larger scale pieces. Doesn't have a lot of power at all to perform any of the 'tasks' it boasts to accommodate.
Question:	can the chuck take 1/4 inch metal rod
Answer:	Don't buy from this company. The lathe they sent was very poorly made and we had an awful time returning it. Amazon had to get involved.
Question:	Is the chuck removable and if so, what is the diameter of the drive shaft
Answer:	It came with 1 tool
Question:	How is this machine cnc? is there a data port or card slot
Answer:	No, it doesn't. Actually I returned it unopened after buying it for this very reason. They were very understanding and refunded the full amount. As the description says it works well with "Plastic and Wood" but not metal.