7 best 8 inch jointer

Product description

PORTER-CABLE® PC160JT variable speed 6" jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in Cutter head Lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
• Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
• Built-in cutter head lock facilitates knife replacement and adjustment
• Extra large table provides ample work support and Surfacing stock up to a full 6" wide
• Center mounted fence gives needed support throughout the cut for accurate edge jointing

User questions & answers

Question:	Can this jointer be attached to a 2 1/2 vac
Answer:	yes with a reducing adapter on your 2 1/2 vac
Question:	What is the recommended maximum board length that should be used with this jointer
Answer:	Maximum board length will depend on the strength of the operator and if/how well the jointer is anchored. I would think 8’ would be doable by most. Comes down to how well you can hold the workpiece down flat on roughly 16” of table before the blade.
Question:	What is the difference betwee the pc160jt and the pc160jtr
Answer:	Hello Kimberly, there is no difference. The actual model number is PC160JT. The JTR is a typo on Amazon. Porter Cable does not make a PC160JTR. Best Wishes!Tomboysupply.com
Question:	What material are the fence and table made out of
Answer:	I am 99% certan that the tables are cast aluminum, and the fence is aluminum. The weight, color and feel make this pretty evident. If it were cast iron it would weigh twice as much and be prone to rust. This jointer is as good functionally as any other. But because of its light weight it must be secured to a stable heavy base. It also needs a bit more tuning than other models. But if you are going to own any precision tools that is something you should become capable of.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, these jointers are extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with a good quality jointer at your workshop.

Flatten and Square the Face of the Board

As a jointer allows you to make one straight surface and one flat surface, you will be able to shape and size wood according to accurate measurements. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. You will be able to select the right speed fir the hardness and size of the material that you are using to cut. The extra-long table and center mounted fence also provides ample work support for an accurate cut.

Your Best Buddy for Cabinet Resizing

If you are enthusiastic about redoing your kitchen, you will adore a jointer. A handy tool for fitting doors and cabinets, you will be able to show off your creativity with a good piece of art. As a jointer’s versatility depends on the user, you will be able to get better at the handling with every use of this tool.

Product description

This 6" Benchtop Jointer combines rugged cast-iron construction in a compact benchtop design. With features like a fully-adjustable aluminum fence and a quick-adjustment knife design, this jointer can handle bevel jointing up to 45°, and does not require a time-consuming and frustrating knife setting jig. A built-in mini impeller actually sucks the chips away from the cutterhead and blows them out the dust port. A dust connection filter chute sized to fit a standard galvanized trash can is also included to keep things neat and tidy.

• Motor: 1-1/2 horsepower, 110V, 12 amp, single-phase
• Cutter head speed: 10,000 RPM, 20,000 cuts per minute
• Two-knife HSS cutter head provides clean cuts, fully adjustable aluminum fence with stops
• 2-1/2-inch dust port keeps work area clear of dust
• Includes free pair of safety push blocks, built-in mini impeller-driven dust collection fan and collection bag.Cutterhead diameter: 1-7/8 inch

User questions & answers

Question:	What is the part# for replacement blades
Answer:	Hi there,This door bell can generate electricity by itself, no battery needed.It can last about 10 years if 6 rings a day. Thanks for your question.
Question:	Is the fence now made of cast iron
Answer:	Yes you can.
Question:	Can I get and use carbide tipped blades on this machine
Answer:	If you are looking for a sensor detector, it won’t work that way. It will wok with space with in 1000 ft. Pretty much cover my home from door to 2nd floor. Gate, I believe you are looking for some motion detector to check actives in/out.
Question:	Can’t get the fence 100% squared at 90 deg, about 64th of an inch off on in feed side. I’ve tried for hours. What’s the trick to get it square
Answer:	You just have to go through them to hear them.

Product features

Shop Fox W1829 6-Inch Jointer

Achieve precise results when you plane wood using the Shop Fox W1829 benchtop jointer. This jointer can produce straight, flat faces on a work piece and properly square it for further layout, construction, or joining. It contains a 1-1/2-horsepower, single-phase motor and a two-knife cutter head that operates at 10,000 RPM and makes 20,000 cuts per minute. A fine-adjust, in-feed table knob enables you to precisely control the cutting depth.

Surface Planing, Edge Jointing, Bevel Cutting

This benchtop jointer is capable of performing surface planing, edge jointing and bevel cuts with ease. The easy-to-adjust fence has stops that simplify the task of adjusting the fence to 45-degrees inward, 90-degrees, and 45-degrees outward (135-degrees). If your application requires a different angle, the preset fence stops can be easily adjusted for your desired angle.

Feature Packed

This full 6-inch capacity Jointer combines rugged cast iron construction in a compact benchtop design. With features like a large fully-adjustable aluminum fence, quick adjustment knife design, bevel jointing up to 45-degrees, and built in mini impeller actually sucks the chips away from the cutterhead and blows them out the dust port.

Integral Dust Collection System

The W1829 features a built-in mini impeller that sucks the wood chips away from the cutterhead and blows them out the 2-1/2-inch dust port. A dust connection filter chute, sized to fit a standard galvanized trash can, helps corral dust and particles and keep your workspace clean.

Product description

10 Amp Benchtop jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
• Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
• Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
• Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
• Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods

User questions & answers

Question:	What are the dimensions of the Jointer itself, not the package dimensions
Answer:	The saw can easily cut the full width of a 12" board when making a 90 degree straight or bevel cut. Angle cuts will reduce the maximum span of the cut.
Question:	How long is it from end to end of the in- and out-feed tables
Answer:	No.but I am surprised at the quality for the price.
Question:	how much does it weigh
Answer:	Maximum speed (rpm) 5000 RPM Arbor size 5/8 in. According to the tech specs in the description
Question:	how wide is the cut
Answer:	In theory it should be able to cut boards up to 12" wide, however the quality was so poor, it was literally falling apart out of the box and I never powered it up and returned it out of safety concerns.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with this jointer at your workshop.

Flatten and Square the Face of the Board

The CRAFTSMAN CMEW020 10 Amp Benchtop Jointer holds a heavy duty 10 amp motor provides power for hard and soft woods. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. Ideal for edging, flattening, or face jointing the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is also portable.

Product description

Over more than six decades, Bon has grown to be a global leader in the manufacture of professional construction tools for the trowel trades. With a firm commitment to provide the best value and to maintain the highest standards of workmanship and customer care, Bon remains a trusted source in the industry.

• Heat treated
• High carbon steel
• Hand polished and finished
• Package Dimensions : 10.5" L x 0.75" W x 0.75" H

Product description

This is a lot of jointer in a small-package. It features a spiral-style cutterhead with indexable carbide inserts, knob-adjustable infeed table with lock for ultra-precision cutting depth adjustments, an in. and metric cut depth indicator and an east-to-adjust extruded-aluminum fence. You won't find a more feature-packed 6 in. benchtop jointer anywhere else.

• Motor: 1-1/2 HP, 120V, Single-Phase, 10A
• Maximum with of cut: 6 in.
• Maximum depth of cut: 1/8 in.
• Cutterhead type: spiral-style with 12 inserts
• Cutterhead speed: 12,000 RPM
• Table size: 6-1/4 x 30
• Dust port size: 2-1/2 in.

Product description

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our powerful 10-amp motor combined with the two-blade 6-1/8 inch cutterhead provides up to 20,000 cuts per minute, making easy work out of even the hardest of woods. Adjust the infeed table to take cuts anywhere from 0 to 1/8 inches deep. The onboard scale makes for easy adjustments to the depth of cut for maximum accuracy before each pass. The spacious table measures in at 6-1/4 x 28-1/2 inches for large or uniquely-shaped workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, exposing the cutterhead only during jointing operation. This package also features an onboard dust port, a push stick, a push block, and a filter bag for minimal cleanup. And, because its a WEN product, the WEN 6-Inch Benchtop Jointer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• Features a spacious 6-1/4 x 28-1/2 inch table and a two-blade 6-1/8 inch cutterhead
• 10-amp motor provides up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch in size
• Onboard depth scale makes for easy adjustments to the depth of cut
• Adjustable 20-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction
• Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, a dust filter bag, and a two-year warranty

User questions & answers

Question:	Two questions, [1. Is it easy to change blades? [2. Can the blades be purchased via Amazon
Answer:	These are 1/2 inch shank
Question:	Does it come in 230 v version
Answer:	Yes, it comes with a micro usb to ac adapter and charger, thank you!
Question:	Can it be used to plane wood as well as joint
Answer:	If you have WiFi!
Question:	Description says "Onboard depth scale" but I cant't see it in any of the images. I can see the knob to adjust the depth but where is the scale
Answer:	It comes with the charger.

Product description

Economy "S" jointer is made from 14 gauge steel. 5/8-Inch at both ends. Made in USA. Over more than six decades, Bon has grown to be a global leader in the manufacture of professional construction tools for the trowel trades. With a firm commitment to provide the best value and to maintain the highest standards of workmanship and customer care, Bon remains a trusted source in the industry.

• The largest selection of tools manufactured to the highest quality standards
• Leader in professional contruction tools
• Product type :TOOLS
• country of origin :China