10 best impact drills

Product description

The DEWALT DCF885C1 20V MAX 1/4" impact driver kit features a compact (5.55" front to back), lightweight (2.8 lbs) design which fits into tight areas. It has 3 LEDs with 20-second delay after trigger release to provide visibility without shadows. This driver offers one-handed loading with a 1/4" Hex chuck that accepts 1" bit tips. Specs: MAX Torque: 1400.0 in-lbs, no-load speed: 0-2,800, impacts/min: 0-3,200 IPM, 1/4"qr Hex drive. Backed by DEWALT 3 year limited warranty. Kit includes: DCF885 impact driver, 20V MAX battery (1.5 Ah), fast charger.

• Increased visibility: Has built in LED with 20 second delay after trigger release
• Ergonomic Design: Compact (5.55 inches front to back)and lightweight (2.8 pounds) design fits into tight areas
• 1 handed Bit Loading: Has a 1/4 inch hex chuck and accepts 1 inch bit tips.
• Reliability: Tools backed by a 3 year limited warranty. Anvil type quick release
• Includes: DCF885 impact driver, 20 volt MAX battery (1.5 Ah), and fast charger
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	What is the product reference (number) of the charger ? I need to check the specs since the description: fast charger is not helping enough
Answer:	The charger is model number DCB107
Question:	Bit size
Answer:	This driver uses the 1/4" hex shank bits, but you could buy a 1/4" hex shank drill chuck adapter like the Neiko 20754A adapter that Amazon sells, and use regular drill bits.
Question:	Can you break Lugnuts off of tires with this impact driver
Answer:	Actually, I used it on a whim to change out the tire on my wife's CR-V. She discovered she had picked up a screw while at soccer practice. I grabbed this impact, the adapter, the socket, and my 4 way and headed to the park. I was planning on breaking them loose with the 4 way and zipping them off and on with the impact. I tried the impact first on a whim. It broke loose 4 of the 5 nuts, and did a good job of seating them all when I put the spare on. I finished torquing them with the 4 way, but I barely even budged them. They would have likely been fine with just the impact. Now, this tool wouldn't stand a chance against the lug nuts on my 1 ton diesel, but neither would any of 3/8" or regular duty 1/2" impacts.
Question:	Can you take simi, and regular tires off with this impact
Answer:	It certainly IS NOT going to take semi lug nuts off. It won't take the lugs nuts of pickups or SUVs either. And while it MIGHT manage to remove an under torqued lug nut from a tiny car, it WILL NOT pull properly torqued lug nuts off of anything. This is a ONE QUARTER INCH impact driver for screws, and small nuts and bolts. To pull wheels, get at least a 1/2" impact with 300 plus FOOT POUNDS of torque (and that won't do semi's)

Product description

The DEWALT DCK240C2 20v Lithium Drill Driver/Impact Combo Kit (1.5Ah) is comprised of the DCF885 20V MAX Lithium-Ion 1/4 inch Impact Driver which is compact (5.55" front to back) and lightweight (2.8 lbs.), designed to fit into tight areas. This unit offers one-handed loading 1/4" hex chuck accepts 1" bit tips, and also features a 3 LED light ring with 20 second delay to provide visibility without shadows. A belt hook is also included for portability on the worksite. The DCD771C2 20V MAX Lithium-Ion Compact Drill/Driver is also compact and lightweight, designed to fit into tight areas. This drill/driver offers a high performance motor that delivers 300 unit watts out (UWO) of power ability, which allows for a wide range of applications. This unit also features a high speed transmission that delivers 2 speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications. The 1/2" single sleeve ratcheting chuck provides tight bit gripping strength, and the ergonomic handle delivers comfort and control. Both tools are part of the DEWALT 20-Volt MAX system and are compatible with all 20-Volt MAX batteries, chargers and accessories. Includes: DCF885 20v MAX Lithium Impact Driver, and DCD771 20v MAX Lithium Drill/Driver, 20-Volt MAX lithium-ion 1.5Ah battery packs, 20-Volt MAX charger and contractor bag.

• Ergonomic Design: Lightweight tools designed to fit the user’s needs
• Increased Visibility: The DCF885 features a built in Led with 20 second delay after trigger release
• Includes: DCD771 drill/driver, DCF885 1/4 inches impact driver, 20V MAX Lithium Ion 1.3 Ah battery packs, 20 volt MAX charger, and kit bag
• 1 Handed Bit Loading: The DCF885 has a 1/4 inches hex chuck and accepts 1 inches bit tips, Power Tool Type: Cordless
• High Performance Motor: The DCD771 delivers 300 Unit Watts Out (UWO) of power ability completing a wide range of applications

User questions & answers

Question:	Hello from pensacola florida my question is can this thing take off a tire if not can you point me to on that dose thanks
Answer:	In the shop I use my 3/8 impact wrench from dewalt with a 20v 5ah battery and i can go almost 2 days before having to charge my battery and i use it for almost everything. It will take off tires, pull headbolts, engine mounts, t-case bolts, and so on. I would recommend if you're working on your vehicle getting the impact wrench with impact sockets. I put about $500 into what i use and it hasn't let me down yet in almost 4 years. With the wrench you won't need the adapter from screw bit to socket so that will save you a headache if you loose it.
Question:	How many inch pounds will this impact driver provide
Answer:	This impact has almost 1500 in-lbs of torque. Very good impact and you can beat the hell out of them they definitely last.
Question:	Does it come with 2 batteries
Answer:	Yes it comes with two batteries
Question:	Does the drill have a hammer setting
Answer:	The drill combo with the hammer setting is DCK299. However, I will say I thought I needed a hammer drill, it turns out it’s useless. An impact drill gives pulses of force laterally (in the direction of rotation) to turn big bolts, a hammerdrill delivers the same force forward. It turns out that this force is so minimal it’s basically useless. If you actually need a hammer drill what you really need is a rotary hammer. Much greater forward bang. A hammer drill is a bit like a vibrating razor. Only useful in masonry and then it goes just as fast without.

Product features

20V MAX* Compact Drill/Driver

Has an ergonomic handle and one-handed loading 1/4-in. hex chuck that accepts 1-in. bit tips.

20V MAX* 1/4-in. Impact Driver

Compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.

Product description

¼” QUICK RELEASE CHUCK, BUILT-IN LIGHT, BELT CLIP - Compact (6”) and lightweight (2.68 lbs - bare tool) design fits into tight areas and minimizes user fatigue. The impact driver comes with a built-in LED light that increases visibility when working in enclosed work spaces or any dark environment. The metal and reversible belt clip helps to keep the driver when on a ladder or somewhere you need. 1" Impact Driver Bits (20Pcs), 2" Impact Driver Bits (6Pcs), 2" Regular Driver Bits (2Pcs), Sockets (10Pcs), Extension Bit Holder (1Pcs).

• 4 POLE MOTOR & 1,770 IN-LBS TORQUE - Our compact 4 pole motor provides higher efficiency, has double work output than a regular brushed 2 pole motor, compared to brushless motor, the performance is closer but more economic. Variable speed up to 2900 RPM and high torque up to 1,770 in-lbs, our impact driver can drive screws or tighten nuts at astonishing speed.
• VARIABLE SPEED & REVERSE CONTROL - The speed of the impact driver can be adjusted from 0 to 2900 RPM by the amount of trigger force. The variable speed control was designed for a wide range of fastening applications. Prefect for repairing work, furniture assembling and other DIY hand working.The forward/reveser switch allows screws driving or unscrewing with convenience.
• ¼” QUICK RELEASE CHUCK, BUILT-IN LIGHT, BELT CLIP - Compact (6”) and lightweight (2.68 lbs - bare tool) design fits into tight areas and minimizes user fatigue. The impact driver comes with a built-in LED light that increases visibility when working in enclosed work spaces or any dark environment. The metal and reversible belt clip helps to keep the driver when on a ladder or somewhere you need.
• LITHIUM ION TECHNOLOGY & 20V MAX - Power up for a longer runtime, no memory and more compact and lighter, much convenient than the corded. Battery gauge fuel easy to check how much power is left and when the battery needs to be recharged. Expectancy of each Populo battery is at least 500-1,000 cycles, so you do not need to worry about the dying batteries or batteries won’t charge after minimal usage. The battery is also interchangeable with other tools part of the Populo 20V Max system.
• ULTIMATE ACCESSORIES SET -  Impact Driver, 1" Impact Driver Bits (20Pcs), 2" Impact Driver Bits (6Pcs), 2" Regular Driver Bits (2Pcs), Sockets (10Pcs), Extension Bit Holder (1Pcs), 20V Max Li-ion Battery, Fast Charger, Belt Clip, Power tool bag all included, ideal for any work around the home or the people who are tasked with driving screws and tightening nuts, for examples remodeler, electricians, cabinet installer, woodworkers, handicraft lovers etc.

User questions & answers

Question:	Where can I order a battery pack
Answer:	No, Microsoft doesn’t have an upgrade provision for Windows Storage Server.
Question:	Where can i buy a battery pack for this unit? a month ago you said it would be available on amazon in 2 weeks! it still is not
Answer:	The TeraStation WS5420DN can be configured to windows storage spaces, but only on drives 3 and 4. The first two drives hold the boot partition.
Question:	Are the attachments in metric or sae
Answer:	The read/write speed will vary depending on data patterns and environment, typically 60-100 MBpS.
Question:	This item is missing the battery ... does it come with it separately
Answer:	Controllers Controller Type: Serial ATA/600 RAID Supported: Yes RAID Levels: 0, 1, 5, JBOD

Product features

Populo 20V Max Lithium Ion ¼” Impact Driver - CIDL-2003

The Populo 20V Max Lithium ion impact driver features a high performance transmission that delivers 1,770 in-lbs of max torque. This driver has a quick release ¼” hex chuck and it offers variable speed, LED work light, belt clip for ease of use for all types of jobs around home.

Lithium Ion Battery Technology

Compact and lightweight, longer runtime and life, making it a cordless tool and no need a power source required. The On-board Battery Fuel Gauge helps you monitor the charge precisely, easy to check the remaining of battery charge and when need to be recharged. so there’s less downtime on the job.

4-Pole Motor

Features a robust design combined with rare-earth magnets for long life, more power.

Durable Impact Mechanism

Metal gear housing increased its endurance while delivers maximum application speed for greater efficiency.

Quick Release Hex Chuck

For quick and easy drive bit change

LED Work Light

Improves visibility in dark work areas.

All-metal, Reversible Belt Clip

Helps to keep the driver when on a ladder or somewhere you need.

Product description

The DEWALT DCF887D2 20V MAX XR Li-ion Brushless 1/4" 3-Speed Impact Driver Kit (2.0 Ah) features a DEWALT built brushless motor and XR Lithium-Ion batteries which deliver more run time and capacity over standard units. This impact driver has 3-speed settings for optimized application versatility, along with Precision Drive in speed 1 for precision applications and added control. It offers three LED lights with 20 second delay after trigger release to provide visibility without shadows. It also allows for one-handed loading 1/4" hex chuck with easy grip sleeve, and accepts 1" bit tips. This unit has a compact and lightweight design to fit into tight areas (2 mm shorter than the previous DCF886). Kit includes: DCF887 - Brushless 1/4" 3-speed Impact driver, DCB203 - 2.0 Ah 20V MAX XR Batteries, Fast charger, Belt Clip, Kit Box.

• DEWALT built brushless motor
• 20V Max XR Lithium-Ion (2.0ah) batteries delivers more run time and capacity
• Compact, lightweight design for tight spaces
• 3-speed settings for versatility with Precision Drive for added control
• LED lights with 20 second delay after trigger release

User questions & answers

Question:	todas las baterias Dewalt sirven para. productos Dewalt
Answer:	I have had my charger for three years. The red light on mine always comes on to indicate the battery is charging. I suspect lack of a red light indicates a problem with the charger, the battery, or the connection between them. The light turns green when the battery is fully charged.
Question:	Where is this manufactured? America
Answer:	Yes it works with my weed eater perfect would recommend it
Question:	Wish they made tools with metal cases and hinges still...if i leave a 6.0ah battery on impact will it fit in case supplied
Answer:	Which Toro Model? As far as I know it is not a universal charger for all Toros.
Question:	Can I use a 2amp or a 4amp charger to charge a 2amp and or a 4amp battery. Both are 12vmax/20volt max lithium ion. are they interchangeable
Answer:	Press the lock switch and then squeeze the trigger switch while engaging the auxiliary-handle switch to turn on the hedge trimmer. The trimmer stays on as long as the auxiliary-handle switch is engaged and the trigger is squeezed. You may release the lock switch once the hedge trimmer is running. To shut off the hedge trimmer, release the trigger, auxiliary-handle switch, or both.

Product features

DEWALT DCF887D2 20V MAX XR Li-Ion 2.0 Ah Impact Driver Kit

The DCF887D2 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.

Product description

Featuring the best power-to-weight ratio of any impact wrench on the market, the Ingersoll Rand 2235TiMAX 1/2-Inch Drive Air Impact Wrench is built to tackle the toughest bolts. This powerful, durable impact wrench packs up to 1,350 foot-pounds of nut-busting torque into a compact and lightweight design. Weighing only 4.6 pounds, it allows you to work for longer stretches of time without fatigue. The four-position power regulator and one-handed forward/reverse push button give you the control and versatility needed to tackle a variety of automotive and industrial jobs. And thanks to its titanium hammer case and rugged composite housing, this impact wrench is tough enough to endure the harshest working environments--from garages to demanding industrial jobsites.

• Plastic / Metal
• Imported
• 930 feet-pounds of maximum reverse torque
• Nut-busting torque of 1350 feet-pounds. Air Consumption @ Load (cfm) - 24. Air Consumption @ Load (L/min) - 680. Average Air Consumption (cfm) - 6
• Finely tuned twin-hammer impact mechanism
• Born from the legendary durability of the Ingersoll Rand 2135 Series.Driver type:Square, Hog-Ring
• Built with a titanium hammer case, steel-wear plate and composite housing that protect the tool from the harshest environments

User questions & answers

Question:	how much is the maximum pressure psi that supports
Answer:	Thank you for your inquiry! Our air tools are rated at 90 psi. We recommend 90 psi for best performance. 90 psi at the tool, while running.
Question:	where was it make
Answer:	As a machinist for IR, I can answer some of the questions. Some of the parts are made in China. However, most of the major parts like the anvil, hammer frame, and hammers are made in America. And the tool itself is assembled in America. I hope that you find this answer satisfactory.
Question:	what psi does it need for best performance
Answer:	Per mfg specs, 90psi. This should be checked at the end of your air line. (Where your impact is connected to hose). Not at your compressor or several feet from your end line. Your Psi will drop the further your line is. If you need more torque and your at 90psi then you should of bought a 3/4" impact. All vehicle service tools are rated and tested at 90psi.
Question:	where it made
Answer:	As a machinist for IR, I can answer some of the questions. Some of the parts are made in China. However, most of the major parts like the anvil, hammer frame, and hammers are made in America. And the tool itself is assembled in America. I hope that you find this answer satisfactory.

Product features

Ingersoll Rand 2235TiMAX Drive Air Impact Wrench, 1/2 Inch

Power through demanding automotive and jobsite tasks with the Ingersoll Rand 2235TiMAX 1/2-Inch Drive Air Impact Wrench. Designed to work with an air compressor, this powerful impact wrench delivers up to 1,350 foot-pounds of nut busting torque in a lightweight design that helps minimize fatigue. The four-position power regulator and one-handed forward/reverse button give you complete control, so you can easily fine-tune torque output and direction to suit the task at hand. With its rugged housing and titanium hammer case, this impact wrench is designed to withstand rigorous, harsh usage.

What's in the Box:

Powerful, Best-in-Class Torque Output

Delivering up to 1,350 foot-pounds of nut-busting torque, the 2235TiMAX Drive Air Impact Wrench capably tackles the most demanding assembly and disassembly jobs. The finely tuned twin-hammer impact mechanism punishes tough bolts and powers through heavy-duty applications such as suspension work and heavy equipment repair.

Four-Position Power Regulator Offers Superior Control

Using the four-position power regulator, you can seamlessly switch between power modes and adjust torque output to suit each individual task. The one-handed forward/reverse mechanism lets you change direction with a simple button push.

Compact and Lightweight

Weighing just 4.6 pounds, the 2235TiMAX Air Impact Wrench offers the best power-to-weight ratio in its class. The ergonomic handle makes operating the wrench easy, while the lightweight yet durable frame helps keep user fatigue to a minimum. You can work harder and faster for longer periods of time.

Rigorously Tested for Reliability

Every component, mechanism, and function has undergone rigorous testing to ensure long-lasting performance. The result is a finely tuned workhorse that endures the toughest applications.

Rugged Design Endures Tough Use

Whether you operate a garage or an industrial jobsite, you can rely on the 2235TiMAX Impact Wrench to perform reliably in harsh working conditions. With its titanium hammer case, steel wear plate, and durable composite housing, this tool can sustain heavy-duty usage.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

• 【Two 2000mAh Batteries & Work Light】This impact cordless hammer drill comes with 2pcs 2000mAh Li-ion Batteries and 1-2H fast charger that can use for strong and steady power and endurable run time. The additional battery makes the cordless screwdriver drill always ready to use without restriction. You can constantly work on your project. The lithium-ion drill driver in 21V-class with a front LED work light illuminates any dark workspace.
• 【25+3 Clutch, 2-Variable Speed & 350In-lb Torque】WAKYME cordless drill/driver, with 25 adjustable clutch settings, step-less variable pressure trigger (2-speed: 0-450RPM,0-1550RPM) provide accurate control. 3 in 1 working mode (Hammer, Driver, Drill), 350In-lb torque(35N.M), no matter it is a household reconstruction, improvements, DIY handcrafts, renovation, garden work or auto repairs, this power drill is your good partner everyday drill/driver.
• 【Compact & Powerful】WAKYME 21V Max drill tool set is designed with all-copper double bearing gear motor: 350In-lb torque max provides strong load capacity. No-load speed 19000-23000rpm powerful impact drill driver offers you all the daily needs and accomplishes more than you ever expected. The lightweight handy drill makes everything is impossible.
• 【3/8 Keyless Chuck & Forward/Reserve Control】This power drill is pretty easy and straightforward to use. Compact drill driver has a large 3/8’’(10mm) keyless chuck which provides an automatic spindle lock that enables one-hand changing with advanced accessory compatibility. The Forward/Reverse switch allows you to either screw or replaces/remove bits for your purposes as well as lock the power drill driver. We offer a 2-year warranty and lifetime service. Hope you have a happy experience!
• 【What You Get】21V Drill/Driver Combo comes with 30pcs drill driver accessories and 1-Charger; 2-2000mAh Battery, 1-Carrying Case. Flexible Shaft can use in places where driver bits are hard to reach. if you have any questions please feel free to contact us([email protected]).

Product features

35Nm-350In-lb Torque Max

3 in 1 working mode (Hammer, Driver, Drill). 25-position torque selector features minimizing the likelihood of overdriving or snapping screws.

350In-lb torque max provides a strong load capacity. No-load speed 19000-23000rpm.

3/8" Keyless Auto Chuck

Large 3/8"(10mm) Auto Chuck helps to fasten screws in seconds, no worry of screws loosens while at work.

It will provide more precision of torque adjustment as needed.

2-Variable Speed

The drill kit is designed with variable 2-speed settings (0-450RPM, 0-1550RPM) to provide accurate control for DIY your any projects.

Stepless Speed Control

The variable pressure trigger alows you stepless control the drill speed easily. Multiple purposes to match your desired application.

Convenient Work Light

Impact driver kit built in a front LED light illuminates any dark workspace.

With this convenience bright led work light, you can work in any work situations.

Forward/Reserve Control

The F/R lever of this impact driver combo kit easily controls the direction of drilling, enables quickly secure or remove screws. By setting the switch in the center position, it will lock the tool for safety.

2pcs 2000mAh Li-ion Batteries

Come with 2pcs 2000mAh Li-ion Batteries and 1-2H fast charger that can use for strong and steady power and endurable run time.

You can constantly work on your project.

Double-end Driver Bits

The drill designed with two slots for put two double-end bits, it's very convenient for a urgent work and will not let your bits lost.

Product description

The DCK299M2 20V MAX* combo kit is ideal for most drilling, hammering and fastening applications. This DEWALT tool kit includes a DCF887 impact driver and DCD996 hammer drill. DEWALT cordless tools also come with two 4.0 Ah battery packs and charger.

• DCD996 20V MAX* 1/2-inch hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time for the cordless drill combo kit
• DCD996 20V MAX* 1/2-inch hammerdrill in the cordless tools combo kit gets 0-38,250 BPM for fast drilling in masonry materials
• DCD996 20V MAX* 1/2-inch hammerdrill in the drill/ impact driver combo kit has a compact size (8.4-inch front-to-back length) and lightweight (4.7 lb) design to fit tight areas
• DCD996 20V MAX* hammerdrill includes 3-mode LED providing lighting in dark or confined spaces up to 20 times brighter than previous model
• DCF887 20V MAX* 1/4-inch impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute
• DCF887 20V MAX* 1/4-inch impact driver has a compact size (5.3-inch front-to-back length) and lightweight (3.4 lbs) design

User questions & answers

Question:	where is the led light on the drill
Answer:	Yes you can drill without the hammer function . In the front of the drill Is the clutch Setting , Along with the clutch setting If you look closely you can see The setting for just Drilling , After that hammer Drilling
Question:	Is the “hammerdrill” an option or is it always in hammer mode
Answer:	I have 5 drills and 12 batterys, they all are lose. I suspect this becase they operate under the bits and are covered with all material drilled; it had yo be lose enough to fall free with out binding the battery. They all work great. Batt life is most affected by leaving on the charger, remove once charged.
Question:	Why is the p2 kit $90 more than the m2? the retail price difference between 4.0 ah and 5.0 ah battery 2 packs is only
Answer:	I would think that if you open the chuck all the way and look in the bottom of the chuck there should be a bolt holding it in. At least on most drills that's how they are held in.
Question:	Does anyone else have an issue with the drill in the dck299p2? one guy said bought three and they were all defective
Answer:	I bought this tool for use in Hong Kong with 240v. I bought the DCB118 fast charger from the UK along with a FlexVolt battery (DCB606) and they work perfectly with the DCD996B (and my DCF887B). It is worth noting that shipping of Li-ion batteries is now restricted internationally based on a number of factors including watt-hours and if the battery is being shipped on it's own or with equipment. I had to return a combo kit as my US trans-shipper would not ship Li-ion batteries with equipment and gave me no option to split the package and ship the batteries separately (conversely, they shipped the larger FlexVolt battery (54V) with charger from the UK without issue).Compatible chargers include DCB102, DCB118, DCB132, and DCB1800B.If you are going to buy the DCD996 (or other 20V MAX tool), then in my experience, just buy the bare tool and then source the battery and charger locally.

Product description

You need to get the top tools you can for your drilling and driving needs. Get the best combination of compact size and raw power with this M12 lithium ion dual tool kit from Milwaukee. It features two of their flagship M12 products, the 2407-20 3/8" Drill and the 2462-20 1/4" Hex Impact Driver. These metal-encased power tools come equipped with a variety of features that help you get your work done properly. They come with rubberized textured handles that let you maintain a grip even in the slipperiest of conditions. They also have onboard fuel gauges. When interacting with the included M12 lithium, the RedLink technology onboard these tools will communicate with the plugged in batteries. This keeps the tool from becoming overheated and the battery from sending out too much power. There is also a 12V battery charger included with the same technology. It can communicate with the batteries it charges, keeping them from drawing too much energy after they’ve been fully charged. Working on an industrial job or on a residential job, it’s going to be the same. You need the best, so go with Milwaukee, whose feature-packed tools will get the job done right.

From the Manufacturer

The 2494-22 M12 Cordless 2-Tool Combo Kit includes the 3/8-Inch Drill Driver and the 1/4-Inch Hex Impact Driver (2450-20). The innovative M12 cordless system is designed to deliver the power and torque required for professional applications, in a size that reaches the tightest and toughest places. Powered by RED LITHIUM, the M12 cordless system offers unmatched power, speed and tool belt portability.

• 3/8" DRILL / DRIVER (2407-20): This all-metal drill / driver combines the compact size of a 12 volt tool with Milwaukee’s highest standards for power. With speeds reaching 1,500 RPM and a 20 position clutch to adjust your torque up to 275 inch pounds, you’ll have more than enough power to drive fasteners and drill holes through a variety of residential and industrial projects
• 1/4" HEX IMPACT DRIVER (2462-20): A whopping 2,500 RPM and 1,000 Inch Pounds of torque define this beast of a 12 Volt tool. Handling of it is supported with the textured grip, which gives you improved control in slippery conditions. It also has an onboard LED lighting system for your driving subjects in dimmer areas, and a fuel gauge that lets you know how much work you can still do on a single charge
• 2 x 12 VOLT LITHIUM ION BATTERIES (48-11-2401): These 12V Lithium Ion batteries can power the M12 line of Milwaukee power tools. They come packed with RedLink intelligence, an innovation that allows communication between the battery and the tools they power. This communication prevents them from sending too much power into the tool and potentially overheating it. On top of that, their compact size gives you the greatest ease of control out of any other M12 li ion battery
• M12 BATTERY CHARGER (48-22-2424): This will take care of your M12 batteries without a problem. It has a battery charging status indicator that lets you know if a battery is charging, has charged, or requires maintenance. It even boasts a pass-through plug to conserve your outlet space
• CONTRACTOR BAG: Keep your tools, batteries, and chargers in this contractor’s bag. It has thick cross-x stitching keeping its handles in place, and its rugged fabric will keep whatever is stored in it protected
• CONTRACTOR BAG: Keep your tools, batteries, and chargers in this contractor’s bag. It has thick cross-x stitching keeping its handles in place, and its rugged fabric will keep whatever is stored in it protected

User questions & answers

Question:	are the batteries 1.5 or
Answer:	2401-20 is lighter with only one speed setting 0-500rpm and 175 in lbs torque 15 settings 2402-20 is 2.0lbs with two speed settings and 300+ in lbs torque
Question:	Is it brushless
Answer:	Mostly to use as a power screwdriver, but you can buy individual 1/4" drive drill bits that are already adapted to this style chuck and/or a keyless check adapter for original style drill bits that will check up in this drill also, this drill does have a clutch with a drill setting on it which in turn would allow it to drill through wood also.
Question:	is there a hard case that will fit these two tools with batteries and charger? thanks
Answer:	No you can not. It’s a 120V charger only.
Question:	Can it be used to loosen lug nuts
Answer:	120 v nadamas

Product description

Bosch introduces another essential and practical piece for your power tools collection with our 12 Volt 3/8 Inch, Two Tool Drill Kit featuring a Power Drill and Impact Driver. Experience our Premium performance to size ratio or power to weight ratio (PS31), which allows for accuracy and precision and PS41 impact driver, which has the shortest head length in its class for compact applications. Keep the power for drilling and fastening needs. Perfect for a mechanical technician, plumber, electrician, DIY projects, and overall professional use. Our cordless drill set, CLPK22 120 (PS31 and PS41), have professional grade power at an incredibly light weight around two pounds. These performance to weight ratio drills make a great tool solution for electricians, plumbers or contractors for ideal over the head drilling or driving. The PS41 has a short head length and powerful torque, meaning this small but mighty unit can be the primary go to tool for the most professional screw driving, removal or drilling applications. The drill kit includes one 12V 3/8" Power Drill Driver (PS31), one Impact Driver (PS41), two 12V lithium ion batteries, one 12V charger (BC330), and one contractor or carrying bag. Perfect for screw driving, screw removal, drilling applications, overhead drilling, and contractors. This drill driver and impact driver drill set combo has two Speeds: 0 350 RPM and 0 1, 300 RPM and 20+1 clutch settings for the PS31 and 0 2, 600 RPM for the PS41. This permits users to make precise torque adjustments for accurate screw driving and drilling. The streamlined drills fit into tight workspaces, with a seven inch head length (PS31). The short length combined with manageable two pound body makes easy packing and jobs in tight spaces with the advanced LED lights for improved visibility especially overhead.

• Power: This Bosch drill kit includes a powerful 12 volt drill driver with up to 1,300 RPM and a 12 volt driver with up to 2,600 RPM
• Compact: The lightweight design of the PS31-2A drill driver is ideal for easy handling in overhead operations and tight spaces and the PS41-2A impact driver offers the precision of variable speed, a light-body, and a short-head length
• Control and visibility: The Bosch cordless drill is easy to handle in tight, narrow spaces, and three integrated LED lights mounted around the head of the driver enable high performance in low-light settings
• Durability: Robust and compact with lightweight design, the drill impact driver combo kit is built to last and backed by a three year protection plan
• Convenient: Drill kit includes: 12V Max 3/8 inch drill driver (PS31-2A); 12V Max impact driver (PS41-2A); 2 batteries, 30 minute charger and soft carrying case

User questions & answers

Question:	Can I charge these batteries with a 240v charger? there would be a problem
Answer:	As others mention, many major tool manufacturers including Bosch offer hex shank drill bits. My guess would be that eliminating the standard drill chuck further reduces the depth of this tool, improving clearance in close quarters. If you REAALLLY need such a chuck to feel complete, small chucks with hex shanks DO exist, can be had for cheap from places like HF. Expect a fair amount of runout with such a solution. Otherwise, consider instead purchasing a sibling product that features a chuck, out of the box.
Question:	Just got this set and the chuck spins extremely loosely. I had an older version that didn’t. Is this normal for this set
Answer:	Yes. At Home Depot they carry drill bits that will work. You need the bits that have the Quick Connect base. If the base of the drillbit is just round, like a dowel, that is the wrong one. They can point you to the right thing at HD, but the answer to your question is yes.
Question:	One person is saying this has 1.5 ah batteries and one says the 2.0 batteries. What ones are they coming with now
Answer:	As another noted, all you need is a simple step-down transformer that somewhat exceeds the power draw - probably a simple 100w unit that you can find on Amazon for not much money at all. As for 50 vs 60 on cycles/frequency, that also does not matter - you charge a battery, and the battery runs the unit. I know all this because I'm an American who has used such tools for years while stationed overseas. I buy the U.S. version on Amazon, and then just use a transformer.
Question:	It's this ps31 driver the same as the ps31-2a
Answer:	I couldn't find the information in the manual. It would be helpful if it were included.

Product features

Designed for Demanding Applications

The Bosch PS41 12 V Max Impact Driver was engineered with the toughest tasks in mind.

Premium Performance To Size Ratio

PS31 has professional grade power at an incredibly light weight of just over two pounds.

Versatile Use

The high torque of the drill to tackle applications in drywall, wood and metal

Long-Term Usage

The Bosch PS41 is able to withstand all the abuse found on professional jobsites.

Product description

The Greenworks 24V lithium-ion platform powers over 50 indoor and outdoor products, including lawn mowers, blowers, string trimmers, chainsaws, power tools, and more! The 24V lithium-ion battery provides 20% more power and 35% more run-time, and delivers fade-free power with no memory loss after charging. The outdoor power equipment allows you to tackle up to 1/4 acre with the available 1.5Ah, 2Ah, and 4Ah batteries. USB ports are integrated into the BAG711, BAG708, and BAG709 batteries, making it a portable charger for phones, tablets, and other compatible electronic accessories. The Greenworks 24V platform comes with a 3 year tool / battery warranty to protect your investment

• Greenworks 24V Lithium-Ion battery provides 20% more power and 35% more run-time, and delivers fade-free power with no memory loss after charging
• Highly efficient brushless motor provides more torque, quiet operation, and longer life.
• Drill / Driver : 1/2 in. keyless ratcheting chuck, 2-speed gearbox (0-380, 0-450 RPM), 310-in-lbs. of torque, 18 position clutch.
• Convenient built-in LED light for working in poorly-lit spaces.
• Included belt clip allows you to free your hands while completing other tasks at hand.
• Includes 24V 1/2 in. Brushless Drill / Driver, 1/4 in. Brushless Impact Driver, Batteries, Dual Port Charger, and Bag
• Impact Driver : 1/4 in. hex quick release coupler, electronic variable-speed control (3 speed), (0-380, 0-450 RPM) and 2,666-in-lbs. of torque

User questions & answers

Question:	Country of manufacture
Answer:	Dear customer, Greeting from INMAKER. The fog particles of INMAKER fogger machineare less than or equal to 50 microns, and the range is 6-8 meters. Hope my answer is helpful to you. Contact us anytime if there should be problems. Being your solution provider, INMAKER is always of help. Have a great day. INMAKER Co. Ltd Customer Service Team Leah