7 best bolton tool combo lathe mill drill

Product description

The BLACK+DECKER BD4KITCDCRL 20V max* Combo Kit features a drill/Driver, a Circular saw, a Reciprocating saw, and a work light. This Combo Kit is part of the BLACK+DECKER 20V max* battery system; compatible with the full line of Black & Decker 20-Volt max line of power and gardening tools. The drill/Driver features an 11 position Clutch to Avoid stripping screws and damaging work surface with a LED work light to illuminate the work surface, Keyless chuck, 0-650rpm. It offers a lightweight compact design which makes it easy to use in tight and confined spaces. The Circular saw features a 5.5" blade, high torque motor, tool free depth of cut and bevel adjustment and a compact design for ease of use. The Reciprocating saw features 3000Spm motor, 7/8" stroke length and tool-free blade changes. The work light is a handy, powerful light up to 70 lumens, for up to 11 hours of runtime for all types of tasks. The articulating LED bulb runs on a 20V Lithium battery. This Kit also includes 20V max* batteries for no downtime. Backed by black+decker's 2 year limited warranty. Kit includes: Ldx120 drill/Driver, Bdccs20 Circular saw, Bdcr20 Reciprocating saw, Bdcf20 work light, LBXR20 20V max* batteries, battery charger, double ended bit, 5.5" Circular saw blade, Reciprocating saw blade.

• Part of the black+decker 20V max* battery system and 2 batteries doubles the runtime for larger projects and less down time
• Drill / Driver features an 11 position clutch with a LED work light to illuminate the work surface
• Circular saw features a high torque motor with a 5-1/2" blade
• Reciprocating saw features 3000Spm motor, 7/8" stroke length and tool-free blade changes
• LED work ight offers 70 Lumens for up to 11 hours of runtime
• Included Components: LDX120 Drill/Driver, BDCCS20 Circular Saw, BDCR20 Reciprocating Saw, BDCF20 Work Light, LBXR20 20V MAX* Lithium Ion Batteries, Battery Charger, Double Ended Bit, 5.5" Circular Saw Blade, Reciprocating Saw Blade

User questions & answers

Question:	Does this system come with a case
Answer:	No, it does not come with a case, but it works well.
Question:	What is included in the $99 drill/driver set
Answer:	The BD4KITCDCRL includes: 1) LDX120 Drill/Driver (1) BDCCS20 Circular Saw (1) BDCR20 Reciprocating Saw (1) BDCF20 Work Light (2) LBXR20 20V MAX* Lithium Ion Batteries (1) Battery Charger (1) Double Ended Bit (1) 5.5" Circular Saw Blade (1) Reciprocating Saw Blade
Question:	charger is 110-220 v
Answer:	The charger is rated for 110V-120V current.
Question:	is the drill/driver variable speed
Answer:	It is a drill. And yes it is variable speeed.

Product features

LDX120 20V MAX Lithium Ion Cordless Drill/Driver

A durable and powerful 20V MAX cordless drill features an 11-position clutch to help prevent stripped screws. A compact, lightweight design enables you to work in tight spaces with ease, and an LED light illuminates work surfaces.

BDCCS20B 20V MAX Lithium Ion Cordless Circular Saw

Powered by a high-torque motor, this compact cordless circular saw features a 5-1/2-inch blade for a variety of cuts. A tool-free depth of cut allows for easy adjustments.

BDCR20 20V MAX Lithium Ion Cordless Reciprocating Saw

This cordless reciprocating saw is versatile, lightweight and easy to use. It features a powerful 3000 spm motor while the variable speed trigger and electric brake provide additional control. Tool-free blade changes and an adjustable pivoting shoe help enhance the ease of use. Battery and charger sold separately.

BDCF20 20V MAX Lithium Ion Cordless Flashlight

With up to 70 lumens and 11 hours of runtime, the 20V MAX rechargeable LED flashlight has the power you need to light up projects big and small.

Product description

Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting metals, chipping and scraping surfaces. Specs: Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes chisel shank size .401.

The Ingersoll Rand 114GQC standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston. A three-piece chisel set is included.

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

This product measures 8.5 inches long and weighs 4.1 pounds. Included is a three-piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

About Ingersoll Rand

Ingersoll Rand is a global, diversified firm providing products, services, and solutions to enhance the quality and comfort of air in homes and buildings, transport and protect food and perishables, secure homes and commercial properties, and increase industrial productivity and efficiency. Driven by a 100-year-old tradition of technological innovation, Ingersoll Rand enables its customers to create progress and a positive impact in their world.

What's in the Box

Ingersoll Rand 114GQC standard-duty air hammer and a chisel set containing a tapered punch, panel cutter, and flat chisel.

From the Manufacturer

The economic air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work. Part of Ingersoll Rand's Edge Series line of air tools: legendary performance at an affordable price.

• Includes 3-piece chisel set
• Quick change chisel retainer
• Longer life alloyed steel barrel and heat-treated piston
• Diffused handle exhaust
• Ergonomic grip

User questions & answers

Question:	Can it be used on tie rods and ball joints
Answer:	Yes, has plenty of power to handle suspension parts.
Question:	Where is it made
Answer:	This Ingersoll Rand Air Hammer and Chisel Set is made in Taiwan.
Question:	How do I assemble it out of the box? This is my first air hammer and it doesn't tell me anything in the printed materials
Answer:	The "tip" if you will is basically a quick (dis)connect attachment for the tips that came with it. Put that on and use the allen screws built into it to tighten it really good. Then you just grab it and slide it down towards the hammer itself, which allows you to insert the tips, then let go and they should be locked in. They won't be locked in tight, because otherwise the hammer isn't able to do it's job and move them, but you should be unable to pull them back out without sliding down the collar again.
Question:	I've got a 2cfm @ 90 psi porter cable compressor. will that be sufficient to power this tool enough to loosen the fan clutch (3 seconds?)on my truck
Answer:	Nope it will not. The specs say "average consumption 4cfm." This means at zero load basically holding it in your hand and pulling the trigger it'll use 4cfm at 90psi. Under load like chiseling out a stuck wheel bearing I've measured mine using 15cfm at 90psi. My 80 gallon continuous duty Ingersoll Rand compressor runs it fine but it's 7.5hp at 240v and is rated for 20cfm at 175psi which I regulate down to 90. My Ingersoll Rand gas powered dual tank "contractor" compressor barely runs it at 11cfm at 90psi. The truck bed mounted gas compressor is the only other one that runs it very well. Manufacturers will never tell you what tools use under load and will deceive the uninformed with specs like "average cfm consumption". I'm not knocking Ingersoll though as they have top notch products it's an industry practice / standard.

Product features

Ingersoll Rand Edge Series 114GQC Quick Change Air Hammer

This standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston.

Product Advantages

- Includes 3 piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

- Efficient design with quick-change chisel retainer that allows you to change chisels quickly and easily

- Longer life alloyed steel barrel and heat-treated piston

- Diffused handle exhaust

- Award-Winning ergonomic grip that offers greater comfort while your're working

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 year. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world's growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

#2 Morse taper mount for Delta, Jet, PSI, and other Midi lathe headstocks and tailstocks. A 1/2-Inch diameter 3-jaw mechanism can be used for securing small turnings or pen mandrels at the headstock, or a drill bit in the tailstock. Accepts a 1/4-20" draw bolt (not supplied) for safety. Will hold drill bits up to 1/2-Inch in diameter. Drill chuck mounted in the #2 MT can be used in either the headstock or tailstock. Tightens with a chuck key(included) for excellent grip. Removed easily with a knock-out bar.

• Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key
• This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories
• The #2MT Arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included
• Removes easily with knock out bar
• Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more

User questions & answers

Question:	Will this fit a Shop Fox w
Answer:	I believe it is a standard 3/8 chuck, but i would suggest taking it to your local hardware store and finding one that fits.
Question:	What is the smallest bit size that this will take
Answer:	Yes, it comes with a key. This was a great purchase for me, be sure you have the correct morse taper number.
Question:	I just received this and lost my chuck key. Which one do I order
Answer:	it should. From what I found that lathe has a 1" 8tpi thread, which matches this.
Question:	Does this come with the chuck key
Answer:	My would guess yes. As long as your lathe has the 1 x 8tpi or 34 x 16tpi, it should work. So far this chuck has worked very well. No set up as long as the larger jaws are the proper size for your work and tightening the jaws is very easy and they stay tight. Good device. .... note I'm a novice so I may be easily impressed!! Good luck.

Product features

Ideal to hold Small Turnings and Drill Bits

The PSI Woodworking Products TM32 1/2-Inch Drill Chuck includes the 1/2" Drill Chuck, #2 Morse Taper Arbor and a Jaw Tightening Key that help you in easily holding drill bits, small turnings, dowels, pen mandrel shafts and much more. As you will be able to tighten this tool with a chuck key, you will be able to get and excellent grip on it. It can also be removed easily with a knock-out bar.

Product description

Parameters:



Maximum workpiece turning diameter of the machine: 125mm



Maximum length of the piece: 180 mm



Maximum workpiece turning diameter on the tool holder: 60mm



Spindle through the hole diameter: 9mm



Spindle cone: MT.1



Number of treated metric threads: 8



Metric thread processing range: 0.4-1.5mm



Number of treated wires: 8



Inch thread range processing: 0.0028-0.0055 1 / n "



Longitudinal feed level: 2



Longitudinal feed for spindle mandrel: 0.07-0.14 mm



Tailstock travel: 18mm



Tailstock cone: MT.1



Spindle speed range: 560-2500 rpm Level 5



Maximum drilling diameter: 6 mm



Distance from the end face of the spindle to the work surface: 120-180 millimeters



Distance from central spindle to column area: 125 mm



Drilling and milling head rotation angle: 360 °



Spindle speed range: 500-2500 rpm 10 levels



Drilling and milling vertical lifting head stroke: 60 mm



Working surface width: 60mm



T-slot work bench width: 8mm



Working surface length: 85mm



Spindle sleeve movement quantity: 40mm

• Maximum workpiece turning diameter of the machine: 125mm
• Maximum length of the piece: 180 mm
• Maximum workpiece turning diameter on the tool holder: 60mm
• Spindle through the hole diameter: 9mm
• Spindle cone: MT.1

Product description

This Model M1015 Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. This Mini-Lathe gives model makers, toolmakers, gun hobbyists, and the weekend machinist a way to economically produce small precision parts, threaded parts, fittings, and dies. Made in an ISO 9001 factory.

• 4 hex wrenches, 100-2000 RPM spindle speed:
• MT #2 spindle taper, MT #1 tailstock taper
• Double ended wrench, socket head wrench
• Oil cup, stand Included
• Chuck key, 3 external jaws

User questions & answers

Question:	Is this lathe suitable for turning brair tobacco pipe stummels and vulcanite stems
Answer:	Mine came with inserts for every tool and one spare insert. I had that same question and I was pleasantly surprised when the package arrived.
Question:	I am a blade smith and would like Know if i could make handles and blade work
Answer:	Dear person, Each tool holder uses a particular insert. Not knowing what tool holder you have I can not give a precise answer. Please provide the tool holders model, typically is written in the tool holder itself
Question:	Will this fit on a worktable that's 43 inches in length and 27 and a half inches wide
Answer:	Bright enough. The light is very durable. It’s not cheaply made. The long neck allows good placement and is strong. The best is the small head - doesn’t obscure visibility. I’ve ordered 8 of these lights so far for the plant floor and will be buying 20 more in the next 6 months or so.
Question:	where this machine made???can do steel and aluminum stuff?or wood only
Answer:	We recommend 32'' bag. The 25'' maybe a little bit small.

Product features

Shop Fox M1015 Micro Lathe

This Model M1015 Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. This Mini-Lathe gives model makers, toolmakers, gun hobbyists, and the weekend machinist a way to economically produce small precision parts, threaded parts, fittings, and dies.

Convenient Control Panel

The M1015 control panel conveniently located for easy access contains a variety of functions for lathe operation. Functions such as the rotation selector knob, speed dial and clutch knob allow for a variety of adjustments to accommodate your turning needs.

Auto and Manual Feed

The M1015 features a manual feed handwheel which moves the carriage left or right along the bed. This control is helpful when setting up the machine for turning or when manual movement is desired during turning operations. Easily engage and disengage the feed from automatic to manual feed with the feed clutch.

Thread Cutting

This lathe has the ability to cut threads of 16, 18, 19, 20, and 24 threads per inch. Included is a gear ratio threading chart to help you determine which gears to use to acquire your desired threads per inch.

Feature Packed

Created for the mini machine enthusiast, the M1015 has all the features and precision you demand for small scale turning. In fact, it''s the perfect machine for scale model building. It includes a 3-inch three jaw chuck and thread gears, and a full selection of optional accessories is also available for a wide variety of setups.

Feed Rates

The M1015 lathe has two available feed rates which move the apron 0.002 inch and 0.004 inch per each revolution of the workpiece, these precision adjustments allow for accurate cuts and efficient turning.

Product description

Parameter:

1.Input voltage:12VDC

2.Input current:2A

3.Power:24W

4.Motor speed:20000rev/min

5.Processing materials length: 135mm.

6.Processing materials maximum diameter: 45mm.

7.The transformer has over-current, over voltage, over temperature protection.



Package Included:

1 x Set Miniature Metal Multifunction Machine

• Application:Wood, plastic, soft metals (aluminum, copper, etc.). Softwood, hardwood
• You can use the three-jaw chuck or collet (1 ~ 6mm) clamping the workpiece, center gongs high 25mm, center distance of 135mm.
• Motor speed:20000rev/min
• The transformer has over-current, over voltage, over temperature protection.
• 1 YEAR WARRANTY: If you have any issues with this product, please feel free to contact us

User questions & answers

Question:	Where do we purchase replacement cutting bits, blades, etc or does this thing use same as full size tools
Answer:	Don’t waste your money. The picture they use is meant to deceive people into thinking it is the whole thing. They will only send you the drill head NOT the lathe.
Question:	Does the chuck have a pass through hole 10mm or larger for longer rods to be used in the lathe? I need to be able to size down 230mm length rods
Answer:	Hello,Thank you for you interest. It's 110-120Volt. If you have any other questions, feel free to send us a message.Thank you.
Question:	What size cutters does this use
Answer:	I've been able to hold .005 with not really trying if I got serious I could hold .001 get good endmills though
Question:	Does this unit run on 12v or is it 120v
Answer:	No it is just the head. The lathe is not included and would be required to mount the head.

Product description

Remember when you spent all that money replacing dull rusty tools? From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is the ideal companion for any workshop. These machines allow for simple resuscitation of dull blades, scissors, screwdrivers, and more. Compact yet powerful, the WEN 6-Inch Bench Grinder provides reliability even in the face of the most difficult tasks. Our package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for material removal and general purpose grinding and a coarse 36-grit wheel for faster material removal. With our quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. This fast speed is ideal for deburring unwanted edges and rust removal. Built with you in mind, our design makes wheel guard removal simple for easy wheel changes. The included eye guards can adjust to prevent them from interfering with your project. Also, don't forget about the flexible work light helping to illuminate your grinding for an increase in accuracy and precision. Of course, as with all WEN Products, our 6-Inch Bench Grinder is covered with a two-year warranty, a friendly and knowledgeable customer service hotline and a national service network. No need to waste anymore money on new tools. The WEN 6-Inch Bench Grinder will save you money by leaving all of your tools as sharp and clean as the day you bought them. Remember when your blades could actually cut through something other than butter? Remember WEN.

• 2.1-Amp motor
• 3450 RPM at no load
• 6 in. by 3/4 in. wheels, 1/2 in. arbor size
• Lightweight design weighs in at 16 lb.Lamp:120V, 40W (Bulb not included)
• Worklight for maximum precision and visibility

User questions & answers

Question:	Will this grinder work for making knives
Answer:	If you are serious about making knives, I would get heavier and mote powerful.
Question:	How do you secure it to the workbench
Answer:	2 holes at the bottom for bolts to secure to a bench. Place Bench Grinder on workbench, use holes as a template and mark with pen the 2 positions for the bolts. Remove Grinder, drill holes and secure with bolts, washers and nuts. Ten minutes.
Question:	How hard is it to put a polishing wheel on? And how good does it do? I'm doing it for restoring straight razors
Answer:	Polishing wheel can be installed easily. This particular model will serve you well as the speed is not high but will polish without damage to mayerila or wheel.
Question:	does it come with wheels
Answer:	Grinding wheels yes it comes with 2. 1 @ Coarse (36 grit) AND 1 @ General Purpose (60 Grit) the higher the grit the lower roughness.

Product features

Let the Sparks Fly

Remember when you spent all that money replacing dull rusty tools? From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is the ideal companion for any workshop. This package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for general purpose grinding and a coarse 36-grit wheel for faster material removal. With a quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. Built with you in mind, the design makes wheel guard removal simple for easy wheel changes. And of course, as with all WEN Products, our 6-Inch Bench Grinder is covered by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to ensure you remember WEN.

Sturdy Base

Our heavy duty base reduces wobbling during operation and ensures safe mounting.

Flexible Work Light

A flexible work light illuminates the work space, promoting accurate sharpening.

Two Wheel Grits

Use the 60-grit wheel for general purpose grinding and the 36-grit wheel for faster material removal.

Protective Eye Guards

Eye guards provide vital protection from sparks and debris for safe operation.

WEN Cast Iron Bench Grinder Stand Available

As all woodworkers know, a bench grinder on a normal work surface often times jostles and skews the other items in a work area due to heavy vibrations created by the grinder. The WEN Bench Grinder Pedestal Stand (sold separately) resolves this issue by providing an independent surface to attach your grinder. The heavy cast iron and steel design limits vibration while providing a sturdy 31.5-inch pedestal for your grinder to rest on. The stand includes a water pot for quenching workpieces, a reliable three-legged design with bolt holes for fastening your stand to the floor and a 9.9-by-12.4-inch cast-iron top with slots and holes for securely mounting your bench grinder.