13 best worx corded drills

Product description

Jump back and forth between your two favorite bits with the 20V Power Share Switchdriver 2-in-1. With two rotating chucks, you can reserve one bit for the pilot hole and one for driving the fastener and just instantly switch between the two—no fumbling for bits in your pocket or dropping them down a ladder. And there’s no need to keep a second drill lying around. It makes projects where you need multiple bits go much, much faster. You can even keep one hand free to hold the project while you rotate the chucks with your other hand and a little help from your thigh or forearm. Just squeeze the red dual chuck release button and press the head against your arm or leg to switch it over. Easy-peasy. With 12 torque settings, up to a max of 265 in-lbs, you can find just the right amount of torque for the job, and not worry about stripping screws or damaging the project surface. And with two speeds, 0-400 revs/min, 0-1500 revs/min, you have the flexibility and power to finish any common drilling application. A 20V Power Share battery and charger are included with this Switchdriver, which you can switch out with any Worx Power Share tool on the platform. You save tons of money when you only need a few batteries to run an entire tool collection.

• [TWO BITS AT ONCE] Easily and instantly alternate between two bits on the innovative Switchdriver head. Drill a pilot hole then the screw, all without switching tools or bits
• [STRIP-PROOF] Automatic torque control stops you from stripping screws. It also prevents you from damaging the surface of the project
• [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [2 SPEEDS] Variable gear train lets you go slow for backing out or drilling into tricky materials, or fast for driving your screws home
• [JUST PRESS THE BUTTON] Switch between the alternating ¼” chucks just by pressing a button. The heads rotate 180-degrees and you get a whole new tool without having to get down from the ladder
• [LED WORK LIGHT] Work in dark or dusty spaces with the trigger-activated LED light. An illuminated workspace is a safe and efficient workspace
• [LIGHTWEIGHT, COMPACT] At just 2.75 lbs., you can use the Switchdriver all day without strain. At that weight, you can maneuver into high and tough to reach spaces

User questions & answers

Product features

Built-In LED

This trigger activated light illuminates any work area, so you can see what you’re drilling in the dark. Perfect for working in basements, outdoors, or tight spaces without lighting.

Rotating Head for Instant Bit Switching

Dual ¼” chucks let you keep your 2 most useful bits always installed. Use one, twist, use the other. No more fumbling for bits or having to use two drills.

Variable 2-Speed Gear Train

Slow for backing out fasteners or for drilling into certain surfaces, fast for the other stuff. 2 speeds to handle every common drilling and driving application.

Electronic Torque Control

This feature helps you manage force, so you won’t over-drill. It virtually eliminates stripped screws and damage to the work surface.

Drill, Rotate, Drive

Drill your pilot hole, rotate the Switchdriver head, drive in your fastener. Drill, rotate, drive again. It makes laborious tasks like building a deck or putting up a fence go much, much quicker.

Tool-less Quick Change

And when you need that 3rd or 4th bit the ¼” hex quick-change chucks don’t require any tools. Just pull the collet locking sleeve away from the tool, replace the bit, and let go. That’s it. Your bit is perfectly seated and tightened.

Product description

The ultimate everyday drill. This 20V drill driver From WORX Cranks out 265 in-lbs of torque with 15 different clutch positions. That means you’ll find the perfect setting for whatever unique combination of screw, bit, and project material you’re using. The rubber grip gives you more control over all that power, and at less than 3 lbs, you’ll be able to maneuver your drill easier, and for longer, before you get tired. The 3/8” keyless chuck changes out bits quickly. And the 2-Speed Gearbox and control trigger lets you go from 0-1450 RPM, depending on the needs of the job. The maximum drilling capacity is 1” for wood, and 3/8” for steel. There’s an LED light so you can see what you’re doing in dark spaces. It’s the perfect compact, powerful drill for all your big and little projects around the house or workshop. This version is a bare tool only. PowerShare 20V Battery and Charger sold separately.

• [265 in-lbs of torque] with a 15 position clutch to find just the right way to use all that power, depending on the job.
• [Comfort & control] the rubber handle absorbs vibration while adding grip. And at less than 3 lbs in total tool weight, you can drill for a long time without fatigue.
• [3/8” keyless chuck] for quick bit changes. 3/8” is the perfect size to handle the most common drilling jobs.
• [2-Speeds Plus reverse] the variable speed control trigger lets you go slow (0-400 RPM) or really wind It up at 1450 RPM.
• [Led light] see what you’re drilling when you get into a dim corner or poorly lit room. And the low battery indicator lets you know when you’ll need to switch it out.
• [Same battery, expandable power] Tool Only, battery and charger sold separately; Share batteries across all your 20V WORX PowerShare tools so you never run out of power

User questions & answers

Product features

3/8” Keyless Chuck

265 in lbs of Tourque with a 15 Position Clutch

LED Light

2 Speeds Plus Reverse

Rubber Handle Absorbs Vibration

3 Lbs in Weight

Product description

There’s nothing more satisfying than grabbing your trusted tool and building or fixing something – making it better – using your own two hands and ingenuity. Well, WORX has introduced a new device that’s sure to be on your favorites list when it comes to tackling projects around the house. It’s the Ai Drill – the first cordless drill with Advanced Intelligence. No other power drill in the marketplace has its combination of features and functions. The new WORX Ai Drill adds a whole new dimension to cordless power drill convenience with its exclusive BitLock, Safe Drive and Pulse Assist features.

Advanced Intelligence can be defined as a machine’s capability to imitate intelligent human behavior, and that’s just what WORX engineers had in mind when they developed the Ai Drill. It’s almost intuitive and so easy to use that first-time users and DIYers will breeze through home and craft projects.

The Ai Drill has three drive modes including drill, Safe Drive and Pulse Assist, which are activated by a switch on the top of the drill. BitLock is one of the key features of the WORX Ai Drill. Load a drill or driver bit into the tool’s chuck, and its motorized jaws will self-center and tighten the bit, and do it with 30 percent more bit-holding torque than tightening the bit manually.

The motorized chuck also reverses to release the bit when it‘s time to swap bits or for storage. To engage BitLock, simply turn and hold the switch ring until the chuck’s jaws have moved to the desired position.

With Safe Drive, the Ai Drill stops screws automatically, delivering the amount of torque necessary to drive the screw in almost any material, and then backs off once the screw head is flush to the surface. Most cordless drills have clutch settings, and the user selects the setting based on the material in which they’re drilling holes or driving screws. The WORX Ai Drill has no clutch settings, instead relying entirely on the tool’s internal electronics to safely drill holes, drive and remove screws, regardless of the work material. Pulse Assist instructs the Ai Drill to apply just enough bit rotation to drive the screw snug to the surface without overtightening or stripping the screw head. This helpful feature also works in reverse to back out stubborn screws without damaging the screw head.

The 3.1 lb. (with battery) WORX Ai Drill is powered by a 20V MAXLithium 1.5 Ah battery. The battery is compatible with other WORX 20V battery packs used in DIY and lawn and garden tools and is part of WORX 20V Power Share program. The MAXLithium battery recharges to full capacity in about five hours. The drill also features a low battery capacity indicator. When the battery’s power is running low, the drill’s LED light flashes.

The single speed (0-800, no-load) drill has a 3/8” chuck. The drill is capable of handling a variety of drilling and driving jobs with 180 in./lbs. of torque. An LED light illuminates the work area and is activated by the trigger. The tool’s drilling capacity is 1” in wood and 3/8” in mild steel.

• Compact smart drill with Advanced Intelligence (Ai) Technology makes every project easier – less than 3 lbs. means reduced fatigue and convenient storage
• Automated BITLOCK allows one-hand operation while providing 30% more holding force than typical manual chuck
• SAFE DRIVE stops driven screw flush with work surface, prevents damage to work and screw
• PULSE ASSIST prevents bit from slipping when drilling on hard surfaces and when driving or removing soft or worn screws
• Share battery across multiple WORX tools within the 20V Power Share platform

User questions & answers

Product description

There’s nothing more satisfying than grabbing your trusted tool and building or fixing something – making it better – using your own two hands and ingenuity. Well, WORX has introduced a new device that’s sure to be on your favorites list when it comes to tackling projects around the house. It’s the Ai Drill – the first cordless drill with Advanced Intelligence. No other power drill in the marketplace has its combination of features and functions. The new WORX Ai Drill adds a whole new dimension to cordless power drill convenience with its exclusive BitLock, Safe Drive and Pulse Assist features. Advanced Intelligence can be defined as a machine’s capability to imitate intelligent human behavior, and that’s just what WORX engineers had in mind when they developed the Ai Drill. It’s almost intuitive and so easy to use that first-time users and DIYers will breeze through home and craft projects. The Ai Drill has three drive modes including drill, Safe Drive and Pulse Assist, which are activated by a switch on the top of the drill. BitLock is one of the key features of the WORX Ai Drill. Load a drill or driver bit into the tool’s chuck, and its motorized jaws will self-center and tighten the bit, and do it with 30 percent more bit-holding torque than tightening the bit manually. This kit includes AI Drill, 20V Power Share Battery, Charger, Interchangeable bit screwdriver, 10ft Tape measure, Spirit level, Utility knife, 3 Allen wrenches, 18 1" Screwdriver bits, 10 2" Power driving bits, Magnetic bit holder, 5 Brad point drill bits, 5 HSS drill bits, 4 Masonry drill bits, 3 Power nutdrivers.

• [BITLOCK] One-hand operations lets you quickly and easily swap out bits. Bits are self-centered and secured 30% tighter than tightening manually.
• [SAFEDRIVE] Stops screws safely and automatically, then backs away once your screw is flush to the surface. Any screw, any material, no damage.
• [PULSEASSIST] Automatically applies the perfect amount of bit rotation – no overtightening or stripping the screw. Easily remove stubborn and even stripped screws.
• [SHARE 20V BATTERY WITH OTHER PRODUCTS] Our powerful, efficient 20V MAX battery powers the Ai Drill and the entire Power Share family of tools.
• [LED LIGHT] Trigger-activated LED light illuminates your work area for ideal visibility under any working conditions.
• [KIT INCLUDES] AI Drill, 20V Power Share Battery, Charger, Interchangeable bit screwdriver, 10ft Tape measure, Spirit level, Utility knife, 3 Allen wrenches, 18 1" Screwdriver bits, 10 2" Power driving bits, Magnetic bit holder, 5 Brad point drill bits, 5 HSS drill bits, 4 Masonry drill bits, 3 Power nutdrivers.

Product description

The Worx 20V Power Share Drill Driver was made to handle every common drilling task you can think of, and then some. Whether it’s a “honey-do” job around the house or some more “serious work” down in the shop, this drill was made for the big and little stuff.

• [2-SPEED GEARBOX] 0-400 or 0-1450 rpm gives you the flexibility & power to handle every common household or workshop drilling application
• [15+1 CLUTCH&3/8” CHUCK] 16 different positions with up to 265 in-lbs. of max torque, to find exactly the right amount of torque for each project; The most commonly sized chuck to handle the most popular bits. And it’s keyless, so you can quickly switch them in and out
• [30-PIECE ACCESSORY KIT] Brad Point Drill Bits, (10) 1-inch Screwdriving Bits, 2-inch Screwdriving Bits, Nut Drivers, Magnetic Bit Tip Holder
• [SLIM & LIGHTWEIGHT& LED HEADLIGHT]you can get a firm grip and slip this drill into tighter places than other drills; Never drill in the dark! This long-lasting LED lamp illuminates any poorly-lit working area. And it doubles as a low battery indicator, so you’ll know when to grab a new battery
• [DO IT ALL WITH THE SAME BATTERY] Do it all with WORX Power Share, the only cordless tool platform that uses the same battery to power 20V, 40V, and 80V tools

User questions & answers

Product description

Power and versatility to tackle projects throughout the home and workshop. Compact and lightweight to improve comfort, control and access to tight spaces. Lithium Ion batteries for maximum run time and stay charged up to 18 months. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. Includes 20 volt cordless drill/driver and impact drivers, 1.5 Ah Lithium Ion batteries, a 1 hour charger, and carry bag.

• Includes 20V cordless drill/driver and impact drivers
• Includes 2-1.5Ah Lithium Ion batteries, a 5-hour charger, and carry bag
• Plenty of power and versatility to tackle projects throughout the home and workshop
• Extremely compact and lightweight to improve comfort, control and access to tight spaces
• Lithium Ion batteries deliver maximum runtime and stay charged up to 18 months

User questions & answers

Product description

The 20V 2-in-1 Axis Reciprocating/Jig Saw from Worx saves you time, money, and its compact design saves you from the ache in your hands and arms that typically come with using saws like these. At only 4.2 lbs, this tool is easy to control, which is essential for the complicated designs you expect to cut with a jigsaw. And its vibration-absorbing soft grip handle cuts down on much of the unpleasant motion that’s inherent in using a reciprocating saw. It runs at 3000 rpms with a ¾” stroke length, which is enough to cut 2” into wood and PVC pipe and go 5/32” into steel plate as a jigsaw, and as a reciprocating saw it’ll cut 2” into wood, PVC, and steel pipe. The LED headlamp illuminates dark work areas. And the off switch locks into place to guard against accidental starts. The tool-free blade change system is easy to use and accepts all common reciprocating saw and jigsaw blades that you’ll find at any local hardware store. Don’t buy separate jig and reciprocating saws when the Axis was built from the ground up to accomplish the tasks of both in less time and with less strain on the user. This Axis comes with a 20V 1.5 Ah battery and 0.4A charger, which you can use with any tool in the Worx Power Share family. You save money in the long run when you can share batteries between the cordless tools in your collection.

• [2 SAWS IN 1] Pivoting, push-button head turns your jigsaw into a reciprocating saw and back again in just seconds
• [ORBITAL CUTTING] The slight circular motion is more efficient for most materials than the traditional back and forth stroke. Get the job done quicker, with less strain on your hands
• [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [COMPACT AND LIGHTWEIGHT] At only 4.2 lbs. you can maneuver easily, make intricate cuts, and work longer with less fatigue
• [DUST BLOWER] The integrated blower keeps dust and debris away from the surface of your cut, giving you better visibility of the cut and a more pleasant working environment
• [USE ANYBODY’S BLADES] Though Worx blades are pretty great, you can go down to the hardware store and pick up any standard reciprocating saw and t-shank saw blades to use in this tool
• [CUTS SO MANY MATERIALS] Wood, metal, ceramic, tile, plastic, tree limbs, PVC pipe, fiberglass, aluminum, copper, thin steel, even roots
• [INCLUDES] 20V Axis, 1.5Ah 20V Battery, 0.4A Charger

User questions & answers

Product features

Cuts Through Almost Anything

Wood, metal, ceramic, tile, plastic, PVC pipe, fiberglass, aluminum, copper, thin steel, even roots and tree branches.

Dust Blower

Keep your project and your workspace clean, so you can see what you’re cutting and enjoy better air quality while you work.

2-Saws-in-1

Turn this saw from a reciprocating saw into a jigsaw and back again with just the push of a button and a pivot of the head.

Orbital Action

The slightly circular motion of the blade is a more efficient way to cut than the strictly back and forth motion of traditional saws.

Tool-Free Blade Change

It’s easy and safe to change out blades. And this saw is compatible with both jig and reciprocating saw blades from most major brands.

Highly Maneuverable

Reciprocating saws are for cutting out complex shapes with lots of twists and turns. So we made this saw lightweight, compact, and cordless. That comes in handy in reciprocating saw mode, too, as you can get into tighter spaces to take down drywall, pipes, and the like.

Flips Into Action

Just push the big red button to unlock the head and flip it up or down, and it locks into place. With 2 fully-featured saws in 1 you save the expense of buying a separate saw and gain the convenience of having one less tool to take to the worksite.

Product description

Meet your new favorite workhorse, the Pegasus. This multi-function work table and sawhorse with quick clamps and holding pegs can support up to 300 lbs as a table, and up to 1,000 lbs as a sawhorse! The legs lock into place and are made of tough molded ABS with steel supports, and the non-slip feet stay in place on both grass and pavement. Yet the Pegasus itself is only 25 lbs, so you can fold it up and carry it anywhere, or keep it in the back of the truck. The integrated clamping system exerts up to 300 lbs of force to keep your project firmly in place, and has a max clamping width of 18 ¼”. And the clamp dog pegs allow you to secure round and oddly shaped materials. This table is 31” x 25” and is a standard 32” high, so it can be linked up with our other Worx tables, and other Pegasuses, to make a longer, fully-functional work table. (Link locks are included.) And the folding tray at the base is designed to hold tools, power strips, or anything you need on the job. The Pegasus is tough and solid enough to be a permanent work table or sawhorse but built to be portable, so you can take it from job to job, or from the basement to the garage without a problem. And it folds down to a depth of only 5”, so it’s easy to store when you’re not going to be using it for a while.

• [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two
• [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer
• [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store
• [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [STORAGE SHELF] On the bottom of the work Pegasus we’ve made a place to hold a power strip or supplies. Perfect extra shelf or storage for your workspace
• [BUILT TO LAST] Made out of a dependable, molded ABS with steel supports and fittings. This table will be with you for the long haul

User questions & answers

Product features

Integrated Clamping System

Even though they’re removable, the clamps are designed for the Pegasus, and are optimized to give you the power and support you need.

Adaptability

You can build yourself an entire workbench by attaching another Pegasus or other Worx tables like the Sidekick or Clamping Sawhorse. All 3 are the same height and use the same joiners.

Foldable for Easy Transport

It’s only 30 lbs and fits right under your arm, so you can throw it in the back of the truck and take it to the job site, or from the basement to the backyard.

2 Bar Clamps and 4 Clamp Dogs

The bar clamps exert 300 lbs of force to keep almost any project firmly in place, and the clamp dogs are designed to hold circular or oddly shaped pieces. Pegasus can hold most projects as a result.

Built-In Measuring Guides

Never worry about misplacing the tape measure or a yardstick. This handy measuring guide is indispensable.

Collapsible and Lightweight

Pegasus folds easily and quickly into a form that’s made to be carried. And 30 lbs is light for a sawhorse. If you work in a lot of places, Pegasus is the table and sawhorse for you.

High Load Capacity

As a worktable, Pegasus can support up to 300 lbs, but folded down into a sawhorse, it can hold up to 1000 lbs. It may be light, but it’s engineered to be sturdy.

Product description

The 4-1/2” AC Compact Circular Saw from Worx was made to cut 2” nominal lumber. There’s no need to lug out the full-size circ saw for jobs like that. Just grab your AC and get to work. It also makes a great saw for DIY-ers or those living in apartments. It’s slim enough to keep in a closet or a drawer. But with a no-load speed of 3500/rpm, it has enough power to do most of the things larger saws can do, with way less hassle. It comes with a carbide-tipped wood cutting blade so you can get going right out of the box. And that blade can be replaced with any 4-1/2” blade with a 3/8” arbor from the hardware store. Plus, you can switch out the blade for metal, plastic, or tile cutting blades, too. It has a max cutting depth of 1-11/16”, and the included parallel guide lets you confidently make long straight cuts. The dust port allows you to hook up your shop vac so it can pull sawdust and debris right out of the air as you work. And the integrated safety trigger prevents accidental cutting. Perfect for quick plunge cuts or any other small jobs you want to do around the house, or big jobs down in the shop if you just want to take advantage of its maneuverability. The Worx 4-1/2” AC Compact Circular Saw is roughly half the size of standard circ saws but has full-size capabilities.

• SMALL FOR A REASON: Quick, more efficient cuts and you can take it with you when you don’t want to lug a big saw around
• EZ-SET DEPTH GAUGE The lever lets you go from 0-45 degree bevel settings with quick adjustment
• MADE FOR LUMBER: Excellent depth-of-cut for slicing up to 2" stock lumber. Cut 2x4s in a single pass. It also cuts metal, tile, and plastic
• SEE THE CUT: Left-sided blade optimization gives you a clear line of sight on anything you’re cutting
• DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX. WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• POWERFUL, PORTABLE: At 4-1/2”, and only half the weight of a full 7-1/4” circular saw, you get portability without sacrificing power. The thinner blade makes for less strain on the tool, so it can work harder
• 4.4 LBS Light, so you can operate it with one hand. That weight also allows you to make more precise cuts and work longer with less fatigue

User questions & answers

Product features

Integrated Safety Trigger

We design tools with safety in mind, that’s why there’s a safety trigger you have to hold in place while you squeeze the on/off trigger. That way no one can accidentally start-up this saw.

Easy-Set Depth Gauge

While the WORXSAW was made to cut 2x4s, you can set the depth to more shallow cuts and use it for all sorts of projects.

Lightweight: Less Than 5 lbs

The WORXSAW is easy to control and maneuver with just one hand. Rip, bevel, plunge, and pocket cuts are all simple to perform as a result.

Left-Sided Blade Design

The body of the tool stays out of the way so you get exceptional cut-line visibility.

Half the Size, Plenty of Power

The 4-½” blade has half the kerf of the traditional 7-¼” circ saw blades, so the motor can spin it twice as fast--up to 3500 revs/min. The thinner blade also causes less strain, increasing the life of the tool.

Perfectly Portable

Full size circ saws can be a pain. The WORXSAW stores easier, travels lighter, and is much handier on the job site or in the workshop. For quick plunge cuts, without all the setup, just grab it and go.

• TURBINE FAN TECH: Worx engineers figured out how to get a jet engine-type motor inside of a leaf blower. Super powerful, yet not so loud that you’ll think it’s getting ready for takeoff
• TWICE AS FAST AS PRO BLOWERS: Professional-grade gas blowers rely on outdated tech. The Turbine is cutting edge, and spins twice as fast as the blowers used by commercial grounds crews
• 2 SPEEDS FOR DIFFERENT JOBS: Go slow for pavement or tight corners. On the open lawn, switch to speed 2 and see what the 110 mph Turbine can do
• 600 CFM: We named the Turbine 600 after the 600 Cubic Feet per Minute of high-capacity air volume that shoots out of its wide-mouth nozzle. That’s a wide, strong path of air that allows you to clear large areas with fewer passes
• DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX: WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• HYPER-STREAM AIR NozZLE: We didn’t just stop designing once we were finished with the Turbine engine. We added an attachable nozzle, optimized to direct all that volume in a concentrated area for tougher jobs
• ONE-HANDED OPERATION: All the power and only 6.4 pounds The Turbine 600 is designed to be controlled with just one hand. The ergonomic design funnels the wind in a way that’s easy to handle
• EXTENSION CORD RETAINER: The 11-1/2” electrical cord comes with a retainer attached, so when using an extension cord it won’t disconnect, even when it gets snagged

User questions & answers

Product features

BLACK+DECKER High Performance Blower/Vac/Mulcher

With up to 250 mph of blowing power, this high-performance lawn blower/vacuum/mulcher isn't just powerful, it's low noise. A high-impact metal fan helps to prevent clogging while grinding up to 16 bags of mulch down to one.

Specs:

Quick Conversion

Easy change between vacuum and blower in seconds.

High Impact Metal Fan

Prevents clogging when mulching, while grinding up to 16 bags of leaves down to one.

EZ-Empty Reusable Leaf Bag

Bag design saves time and effort.

Variable Speed

Allows controlled cleaning in gardens and flower beds.

About BLACK+DECKER

Since 1910, BLACK+DECKER has been setting the standard for innovation and design of power tools, outdoor yard care equipment, and home products. The inventor of the first portable electric drill with pistol grip and trigger switch, BLACK+DECKER has evolved from a small machine shop in Baltimore, Maryland to a global manufacturing powerhouse with a broad line of quality products used in and around the home. When home owners have work to get done, they trust that BLACK+DECKER’s products will do the job efficiently and reliably.

Product description

WORX WX682L 20V Oscillating Tool

• 20-volts coupled with 3.2Degree oscillating motion delivers faster speed of cut
• Variable speed (5,000-20,000-OPM) and multi-angle adjustments offer maximum control over a variety of application
• Integrated work light illuminates work surface for accurate cutting
• Universal interface allows you to use oscillating accessories from a variety of brands for your convenience
• Ideal for cutting, sawing, scraping, sanding and more

User questions & answers

Product description

The 6-amp 4-1/2” WORXSAW Compact Circular Saw was made to chop wood. Sure, you can cut metal, tile, and pipes with it too. But when you want to make quick and hassle-free plunge and rip cuts, and slice up 2” lumber, this is your hand saw. Getting a full-size circ saw out from the shop can be a pain. This one-handed little ripper is ready to go at a moment’s notice. Its smaller blade puts less strain on the motor, so it spins faster, giving it the rpms of a much larger saw. Yet this lightweight, ergonomic design lets you take all that power into tighter spaces that a larger circular saw wouldn’t have a chance of fitting into. It comes with 6 blades to get you going right out of the box, a parallel guide, and a Hex key for quick and easy blade changes. The safety trigger is built right into the grip, so it’s easy to get to as you’re activating the on/off switch. And that makes this saw safer, because you can’t accidentally start it up by just pressing one switch. The combination of the laser guide and the left-sided blade placement means you’ll see just where the cut line is, and that’s going to lead to straighter cuts. Plus, this amazing saw slices through 2x4s in a single pass. You’re going to get so much wood cut you’ll feel like a woodchuck.

• [LASER LIGHT& VAC HOOKUP] So you can see exactly where you’re cutting, even in darker workspaces; Dust extraction port lets you attach your favorite shop vac so you can suck up most of the sawdust while the saw is in use
• [COMPACT] The streamlined form-factor lets you get into tighter spaces, plus, it’s easier to control
• [EASY ADJUSTMENTS] Quickly switch the depth and the angle to make all sorts of different cuts
• [SEE THE BLADE] Designed to show the user more of the blade so you can make more precise cuts
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last

User questions & answers

Product description

When you need a tough angle grinder that’s streamlined with modern features, easy to use, and can get into tight spaces - grab the Worx 20V 4-1/2” Cordless Brushless Angle Grinder. 8500 rpm means you’ll have the force to take on heavy jobs like grinding metal, cutting tile, paving, and routing out mortar. The sleek design gives you dexterity for detailed jobs like sanding and polishing. This grinder is cordless, and only 4.5 lbs., so you can twist and turn into tighter spaces without worrying about tangling up a cord. The secure grip is designed to give you control, and the 2 position auxiliary handle lets you change your attack angle depending on the job. This grinder is driven by a brushless motor, which runs faster, longer, uses less power, and has a longer life than tools that utilize a motor designed around a brush. The anti-kickback technology shuts the grinder down when sensors detect a jam, so it’s easier to operate. It’s part of the PowerShare family of 20V and 40V power and garden tools, so you can grow your tool collection while saving money on batteries. This model is the bare tool only. 20V PowerShare battery and charger sold separately.

• [BRUSHLESS MOTOR] Delivers a longer runtime and more power, which means more efficiency. Plus, it significantly extends the life of the tool
• [ANTI-KICKBACK] Electronic technology shuts down the tool when a jam is detected
• [SLIM DESIGN] Easier to get into tight spaces, easier to transport and store. At only 4.5 lbs., anyone can use it
• [SECURE GRIP] Ergonomically designed handle gives you secure control and is comfortable to use for long stretches
• [AUXILIARY HANDLE] 2 positions so you can get leverage and find a grip that works for you
• [SHARE BATTERIES, SAVE MONEY] Use the batteries from your existing Power Share tools and expand your collection without paying for extra batteries and chargers
• [POWERFUL SPECS] 8500 rpm, 4 1/2" x 7/8" disc size, 5/8" x 11 UNC Spindle
• [WHAT’S IN THE BOX] Auxiliary Handle, Metal Grinding Disc, and a Spanner Wrench; 20V PowerShare battery and charger sold separately.

User questions & answers

Product features

Ergonomic Grip

For secure control and more comfort, especially when using the tool for extended periods. It saves wear and tear on your hands, wrists, arms, shoulders and back.

Auxiliary Handle

So you can get more leverage. With an auxiliary handle, you have options on how you want to tackle a project.

Efficient, Powerful Brushless Motor

Brushless motors use less battery for a longer runtime on a single charge. Plus, they have a longer operational life and extend the overall life of the tool.

Kickback Protection

When a jam happens, sensors detect it and shut down the tool, making this Angle Grinder safer and easier to use.

Compact Form Factor

Simpler to transport and store, easier to get into tight spaces and work. Specifically made to be slim and nimble.

Lots of Power in a Streamlined Design

Angle grinders can be intimidating, so we made one that is easier and more comfortable to use. This tool is great for both those that are unfamiliar with angle grinders, and for those that are experienced but just want a tool that’s ergonomically friendly.

Tackle Tough Tasks

Cut tile, stucco, and pavers, grind metal, rout out mortar, deburr, finish and polish. It has the power of larger angle grinders so you can still get the job done. Don’t let its slim design fool you, this grinder means business.