14 best ate tools angle grinders

Product description

Heavy-duty cast iron construction prevents walking and wobbling during operation. Designed to fit the WEN 4276 6-inch Bench grinder and the WEN 4286 8-inch slow speed Bench grinder.

Product description

The DWE4214 4-1/2-inch (115mm) Small Angle Grinder Tool features three powerful systems for maximizing performance such as the Dust Ejection System for preventing damaging dust from entering 4 1/2 grinder, One-Touch Guard for 360-degree rotation, and Quick-Change Wheel Release for easy wheel removal.

• 11 Amp AC/DC 11,000 RPM motor of the angle grinder is designed for faster material removal and higher overload protection
• Dust Ejection System of the metal grinder provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
• DEWALT angle grinder comes with low profile gear case allowing access into tight spaces
• Quick-Change wheel release allows tool free wheel removal
• One-Touch guard allows 360 degree rotation of the guard with a single action
• Lock-On slide switch provides increased user comfort in extended use applications
• Matching wheel flanges allow the use of common accessories

User questions & answers

Question:	i bought 3 grinders would like to purchase the other five you have in stock but it only lets me purchase 3 anyway i can get the other
Answer:	Well this is an ivory which matched my toilet perfectly.
Question:	Made in the USA
Answer:	The bottom is flat. The actual seat only lasted in my teenage bathroom about 6 months. I have already replaced it.
Question:	Were is it made
Answer:	No. It is a hard cover and seat.
Question:	What size drive shaft? Is it
Answer:	You can watch the tutorial that others have made. It’s very helpful.

Product description

This wood carving disc provides rapid material removal, saving your time and effort, suitable for curved work.

Suitable for rapid removal and shaping, especially for convex and concave areas.



Specification:

Material: Tungsten Carbide

Shape: Arc Type

Color: Silver

Diameter: 85mm (3.35inch)

Bore: 22mm (7/8inch)



Package Included:

1 x Grinder Shaping Disc 



Note:

1.Please check the size of your angle grinder before placing an order

2.Actual color may be slightly different from the image due to different monitor and light effect

• Size: Inner diameter = 22mm(7/8inch), Outer diameter = 85mm(3.35inch). Hundreds of extremely sharps teeth that rapidly remove stock and outlasts hundreds of sandpaper pads.
• Application: This Grinder Shaping Disc is designed to mount on a standard angle grinder. The serrated edge provides smooth and controlled grinding and polishing to maximize grinding performance.
• Material: Made of high carbon steel, stronger and more durable, wear resistance. The surface consists of hundreds of extremely sharps that rapidly remove stock. Can be used for woodworking, wood carving, root carving, polished tea tray, coffee table and so on.
• Easy to Operate: High-performance wood carving tool for angle grinders and manual sanders. It has a special anti-backlash design, easy to use and install, and stable performance.
• Package Included: 1 x Grinder Shaping Disc. We provide 1 year warranty! If you have any questions about our wood carving disc, please contact us and we will try to resolve them.

User questions & answers

Question:	Can this be used to remove bark or a live edge shelf and leave a sandable edge for smooth edge
Answer:	one sire is metric the other side is standard. Metric sizes in mm increments. Standard in 1/16 inch increments. Look at the pictures. First picture in listing shows both sides of the square. Side A & B.

• ✔ Good design：High diamond concentration for long life and aggressive material removal. Large grinding segments with heat-treated steel bodies which provide increases durability and wheel life
• ✔ Product Usage：Suitable for dry or wet grinding of concrete, granite, stone, marble, tile, masonry and some other construction material to smooth uneven surfaces and remove flashing
• ✔Compatible models:Suitable for grinding machines and angle grinders.
• ✔Unique stomata:The air holes designed is help to maintain and cool the cutting pattern and reduce wear so as to produce a more consistent diamond scratch pattern
• ✔Warm tips:Please check the size of the wheel to see if they can compatible with your gender! If it does not fit your gender or you don't know how to use it, please contact us, we are willing to help.

User questions & answers

Question:	Why is the description talking about a drinking tumbler and not the grinding wheel? Really messed up
Answer:	The bumper has a strong adhesion, if you paste it wrong, tear it off and paste it again.
Question:	What size is the arbor
Answer:	It's just a bumper. The thickness of the toilet cover bumper is 5mm, which has little effect on the height of the toilet.
Question:	Will it work with a 4 1/2 angle grinder
Answer:	The bumper has strong adhesion, just need to press the bumper hard to make the bumper and the toilet cover completely bond.
Question:	Rated operation speed of disc
Answer:	Yes

Product features

4-Inch Concrete Turbo Diamond

Specification

Material:heat-treated steel body and high concentration of diamond

Color: as shown in the picture

Outside Diameter:4 Inch

Package includes:

1* diamond grinding wheel

✔ Strong Materials STRONG MATERIALS

Only impact-resistant and temperature-resistant diamonds are used for the cup wheel, which are optimally combined with a wear-resistant metal bond.

✔ Two Diamond Rows TWO DIAMOND ROWS

The cup wheel is designed for angle grinders, concrete grinders, concrete milling cutters, wall grinding systems and floor grinders.

You can safely process concrete, concrete products, granite, natural stone, stone and masonry.

6 Hole Dust Extraction

Provide the optimal & necessary combination of allowable airflow and debris removeal when used with a vacuum.

High-Grade Diamond

This diamond grinding disc is made of high-quality steel with, shock-proof, high-temperature resistance

Accessories

Mainly for firmness and play a certain role

12 Diamond Segments

Designed to optimize a smooth and effcient removal of materual.

• 😊【BLACK DIAMOND CUP WHEEL】: The black diamond material is a high-strength, high-wearing honeycomb soft abrasive tool formed by combining high-strength wear-resistant fiber mesh as substrate and organically combining resin elastomer and corundum with a special process.
• 😊【RUST REMOVER PAINT SIZE】: 4-1/2" x 7/8" (115*22mm) : Diameter 4-1/2"，Thickness 3/5"，Aperture 7/8", Maximum speed 11500 (R.P.M), Safe speed/min 8600, Abrasive grain size - black silicon carbide 46#
• 😊【SCOPE OF APPLICATION】: The wheel rust remover applies for sanding interface grinding, oil pipe burr removal, ceramic bottom polishing c1/2ar surface paint removal and so on. Easy to strip discs clean & remove paint, rust and oxidation
• 😊【USE】: Our poly strip disc wheel suitable for angle grinders of various models in the market.
• 😊【PREMIUM PERFORMANCE】: Paint rust remover does not damage the surface of the object, the grinding force is uniform, the processing effect is uniform and wear-resistant, the water resistance is strong, the plasticity is strong, the softness is good, it is suitable for various shapes to be peeled off by the grinding body, the grinding sound is small and the dust is small.

User questions & answers

Question:	What is the maximum depth of the profile it will do
Answer:	This is designed to sit on top of the commode with the seat in the up position. However it may interfere with hinges on your seat, depending on the design of your seat. I had to make some cutouts on the one I bought to clear the toilet seat hinges. After doing that it works fine. The lift is 5 inches from the top of the toilet bowl.
Question:	how quickly will Strip & Clean Discs stops
Answer:	I returned it the following day, nnever used it. Put it in place, sat down and found no room for the Male Anatomy. Ok for a Female.
Question:	hello, How many do i get
Answer:	5". This seat sit directly on the commode. You may have to remove your regular toilet set to use this. It would not clear the hinges. I modified mine to make clearance for the regular toilet seat hinges.
Question:	Is this a 4 or 4 1/2 strip disc
Answer:	My toilet is an elongated standard size. I used this for months after double knee replacement surgery. I cannot give you the exact measurements since I no longer have the seat. The seat comes with four non skid pads that are placed under the seat, these come off eventually when you clean the seat. Even without the non skid pads the seat is secure because it has a rim that fits inside your toilet bowl (with the seat raised). I felt that this seat completely filled my needs without the hassle of removing the toilet seat.

Product features

Widely used in metals

• Rust stripping disc durable in use
• Hard-wearing, low grinding noise
• Uniform grinding effect, less dust

Great for woodworking

• Fast to remove the paint or rust without damaging the original surface
• Easy Strip Discs Application
• Fit for most makes of 100mm to 115mm angle grinders

Remove Scaling, Oxidation, rust

• Used for surface preparation, conditioning and finishing
• Excellent for removal of paint or rust off car panels
• Also great for use on wooden or fiberglass surfaces

Product description

Color: Gold Weight: 190g .Package includes: 1* diamond grinding wheel 1.This diamond grinding disc are made of high quality steel with new diamonds, shock-proof, high temperature resistance 2.Air holes designed to help and maintain a stable sanding pattern and reduced wear 3.Suitable for all types of angle grinder and concrete grinder, such as 4/5 polisher adapt, on grinder with 5/8 arbor and 7/8 arbor 4.Ideal choice for people who make granite and marble worktops, gravestones, tiles, builders Note: -- Be sure to wear hearing protection, a dust mask, goggles and protective clothing before using the angle grinder

• Material: Diamond.Color: Gold. Package includes: 1* diamond grinding wheel
• Inner diameter : 22mm / 0.86 Inch
• Diameter of Grinding Wheel: 100mm(4 inch)
• Thickness of Grinding Wheel Disc Body: 29mm(1.14 inch)
• Thickness of Gear: 7mm(0.28 inch)

User questions & answers

Question:	will this work in wet applications to eliminate the dust
Answer:	U.S.A
Question:	will this work for grinding a stump? or will it just clog up
Answer:	The shaft is a 5/8" shaft, the flange that holds the discs is 7/8". So you will be using a disc with 4 1/2" X 7/8" specs

Product description

Landscapers & contractors are demanding more cordless alternatives to corded & gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V x2 LXT (36V) Brushless chain saw. With zero emissions, lower noise, & considerably less maintenance, It is a welcome solution for cutting & trimming applications. It's powered by two 18V LXT batteries for maximum power & run time, but without leaving the 18V battery platform. & with the efficient Makita outer rotor Brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. XCU03PTX1 model is a kit & includes the chain saw, two fast-charging 18V LXT Lithium-Ion 5.0Ah batteries & an efficient 18V Dual Port Rapid Optimum Charger. The kit also includes an 18V LXT Brushless 4-D/2" Angle Grinder, which is equipped with an efficient Brushless motor & automatic speed change technology For corded grinding performance without the cord. The chain saw has a 14” guide bar & the Makita-built motor with variable speed delivers 0-3, 940 FPM For increased cutting speed, but with less noise (only 100dB(A)). it has zero emissions & reduced maintenance: there's no engine oil to change, no spark plug to replace, & no air filter or muffler to clean. & there's no need to drain the fuel for storage. Simply pick it up, load two 18V LXT Lithium-Ion batteries, & the saw is ready to use. Convenience features include a "tool-less" Chain adjustments, A front hand guard engineered to actuate chain brake When engaged, an electric brake for maximum productivity, & more.

• Makita-built outer rotor BL Brushless motor direct-drive system provides high power efficiency Equivalent to gas chain saw
• Variable speed trigger and high chain speed (0-3, 940 FPM) For improved cutting performance
• Built-in L.E.D. On/off switch with auto power-off function; automatically shuts the saw off when operation is delayed for extended Battery life
• Two 18V LXT Lithium-Ion batteries deliver power and performance without leaving the 18V LXT platform
• Built-in lock-off lever helps prevent the chain from accidentally engaging

User questions & answers

Question:	What grinder model in set makita xcu03ptx
Answer:	Yes works perfectly on 4 1/2. Great price for what it does.
Question:	Which grinder does the kit come with
Answer:	I’m not sure, but it worked great on rounding the concrete edges of my girlfriend’s patio
Question:	can the oil for the bar be ajusted like gas saws
Answer:	Place another order of 3 then an order for two
Question:	What size file do I need to sharpen the chain
Answer:	Yes all Dewalt Tools are made in the USA

Product description

DEWALT DW4772T 4" XP Turbo Diamond Cup Wheel; High Diamond concentration for long life and aggressive material removal. Features large grinding segments with heat treated steel bodies which provides increases durability and wheel life. Double rim provides longer life and more aggressive material removal. Diameter 4", Arbor diameter 5/8 - 11", Max RPM 15,000. Designed for Smooth finish masonry grinding; dry grinding of concrete and other masonry materials and for smoothing of uneven surfaces.

• High Diamond concentration for long life and aggressive material removal
• Large grinding segments with heat treated steel bodies
• Arbor diameter 5/8 - 11"
• Max RPM 15,000

User questions & answers

Question:	Will this fit on dewalts 20v cordless grinder dcg
Answer:	Hello, these strip discs is five pack for one set. For details, please refer to our details page and choose the size that suits you. thankyou!
Question:	Does this diamond cup wheel work on removing latex paint from masonry and concrete? Does it leave a rough or smooth surface
Answer:	These are 4 inch. I cannot say much more about them at this point not having broken into this pack. I have been using another brand in 4.5 inch and so long as the surface is reasonably smooth they last well for paint/moderate rust/mill scale removal leaving a good paint-able or weldable surface.
Question:	I need to take down a concrete threshold about 8 inches by 6 feet down about a half inch to match level of two floors. Will it take off a half inch
Answer:	Mind describe the right product as well, but when I went back to review my order it did show a tumbler cup Instead of a grinding Cup which it is. If you're also looking for a rating or review it worked well for me
Question:	will it grind down ceramic tile
Answer:	I’m pretty sure it’s 2.5 inch, advise don’t use this product on a newer vehicle. You will get the check engine light and have issues with the air mixture ratio

• 1pc 1-3/8 inch vacuum brazed diamond drill Ccore bits for porcelain ceramic tile.
• Diameter 1-3/8 inch(35mm); Connection: 5/8-11 arbor; Diamond height 15MM,Total height: 75MM.
• Machine: Angle Grinder； Remark: *Max working depth: 50mm*.
• Dry/wet drilling for porcelain tile marble stone masonry brick normal stone.
• High quality Diamond Grain provide fast and smooth drilling.

User questions & answers

Question:	Is there a guide for drilling a hole in the counter because I don’t see a pilot bit in the middle of it so how do you stop it from moving around
Answer:	yes
Question:	What is the true diameter of the hole
Answer:	It would not work, you need something with teeth/spikes
Question:	What is the recommendation for rpm range
Answer:	I'm not sure what you are asking exactly. The disc itself is 4" in diameter. 1/2" thick and if you can understand this analogy, the disc is mounted to the bottom of a grinder disc style head.
Question:	Can this cut into concrete curbing / sidewalks
Answer:	Glad to answer your question. The rust grindering wheel maximum speed 12500 (R.P.M), Safe speed 9900/min, The rotational speed and linear speed of your machine's mark cannot exceed the disc's mark. Otherwise, the grinding disc may be easily damaged when overloaded. hope help.

Product features

High quality Diamond Grain

• Diamond Hole Bits are made with High-strength steel and High quality Diamond Grain(15MM Diamond Hight) with U-shaped chip flute design
• Which could not only provide fast and smooth drilling, but also ensure longer workable life

Vacuum Brazed technology

• Vacuum Brazed technology makes the industrial diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments
• So you could drill holes in Dry/Wet Conditon, very convenient

5/8"-11 Thread

• With 5/8-Inch-11 Thread, Used on angle grinder,very easy to operate
• Notice: if you want to fit our hole saws on drills or other machine, you need an adapter, such as SDS,Hex, Round Plus Shank

Step 1

• Fix it on angle grinder tightly and rightly
• Turn on the angle grinder and let the bit rotating in the air to check if there is balance problem

Step 2

• Place the drill at a 45 degree angle
• Drilling till the hole start to form

Step 3

• Bring the drill up into upright position
• Continue to drill and swaying the machine along a circle

Application

1. Drilling Porcelain/Tile/Marble/Brick/Stones/Granite/Masonry/all similnot recommend for the material behind the tilear materials
2. Ideal for drilling the faucet mounting holes in stone countertops, plumbing lines in showers and vanities
3. Dry or Wet Drilling - use wet will greatly prolong the segment life

Which Machine?

1. With 5/8-Inch-11 Thread; Easily operate on Angle Grinder
2. If you fit them on drill or other machine, you need an adapter, such as SDS, hex, Round plus shank...

Product description

Coleman Cable 09716 14/3 SJTW Power Tool Replacement Cord, 6-Foot. Professional grade replacement power cord for power tools. Heavy-duty strain relief protects electrical connections resulting in longer cord life. Reinforced blades help prevent accidental bending or breaking. SJTW rating - designed for outdoor use - weather resistant jacket. Meets OSHA specifications for general use. SJTW - service junior thermoplastic with weather resistant jacket. OSHA compliant - worn or frayed cables shall not be used. The Coleman Cable (R) brand is a registered trademark of Coleman Cable Inc.

From the Manufacturer

Coleman Cable 09716 6-foot replacement cord, 14/3 SJT. These 6-foot replacement power cords are 14/3 SJTW and are a hard service cord, made of a thermoplastic jacket. It is a 300 volt, weather resistant cord, that may be used outdoors

• 6” MEDIUM DUTY: Replacement cord ideal for your workshop and garage power tools
• HEAVY DUTY: Strain relief plug protects electrical connections for longer cord life
• DURABLE REINFORCED BLADES: Help prevent accidental bending or breaking
• WEATHER RESISTANT: SJTW jacket rated for indoor and outdoor use
• TEMPERATURE RATING: -40 to 140 F
• RATINGS: 15 amps, 1875 watts, 125 volts

User questions & answers

Question:	Does work for light of outdoor
Answer:	XAG04
Question:	Is the cord soft and pliable, like a handheld power tool cord? Or is it stiffish
Answer:	Fixed speed
Question:	can I use this to add plug in cord to hard wire power strip
Answer:	Yes. It has all the same features as a gas saw.
Question:	We need to connect an undercabinet range hood that has a wire connection and convert it to plug into the wall outlet. Would this be safe to use
Answer:	I use 3/16" file = 4.78mm rather than a 5/32" = 3.96mm i was taught many years ago by a hand sharpener to use the next size up from what the chain manufactuer recommends. this gives you a better cut. Put your saw in a vise so you can properly sharpen the blade. The first filing will be tough because there isnt much room to fit the file but change your angle to get the file thru and then work it back to the correct angle. these blade have angle marks to follow with your file.

Product features

Southwire Tools and Equipment: Built For Durability. Built For Reliability. Built For Work.

Southwire Tools & Equipment provides a comprehensive line of top-quality hand tools, meters, testers, lighting, extension cords, temporary power solutions and contractor equipment. Built for durability. Built for reliability. Built for work.

• Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs.
• With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal.
• For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials.
• Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder.
• Carbide burr kits shank diameter:3mm(1/8 inch), Cutting edge diameter:3mm(1/8 inch),and 20pcs/set.

User questions & answers

Question:	Are these any good for grinding on hardened steel, or only mild steel and softer
Answer:	I have found they are
Question:	Will these work for hard wood? and are they completely true around the rotation axis? (aka absolutely no wobble
Answer:	better not work on hard stone
Question:	will they work on stone
Answer:	never tried, but I doubt it, don't think it's hard enough
Question:	Will they work to remove a broken tap
Answer:	I've used them on both and in both cases they worked. One burr clogged a little, but I'm pretty sure that was due to the wood being rather resinous. All in all I'm quite happy with the way they perform.

Product features

Specification

• Shank diameter:3mm(about 1/8 inch)
• Cutting head diameter:3mm(about 1/8 inch)
• Total length:38mm(about 1-1/2 inch)
• Material : solid tungsten carbide Q
• uantity:20pcs/set with a plastic case(99x64x11mm)T
• otal weight: 95 gram with plastic case

Application

• Carbide burrs can process a variety of high-precision mold cavity,long service life,applies in the cast iron,cast steel,carbon steel,alloy steel,stainless steel,copper,aluminum,and other metals.W
• ide range of uses includes body shops,fabrication shops,aviation industry,brake shops,industrial shops,die manufacturers, metalwork,tool making,model engineering.M
• achined from new raw tungsten carbide,unique tooth angle prevents chipping for the longest lasting design possible.

Tips

1.Make sure you get what you bought

2.Keep your eyes and belongings away from the working bits,better wear goggles

Product description

Features

√Made of Heat-Treated carbide which lasts long working life, sharp and durable

√Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish

√Easy to use, safe and reliable, can reduce labor intensity, improve the working environment. 

√Ideal for cleaning up welds,grinding weld beads, shaping parts, smoothing rough castings, or porting cylinder heads

 

Specification:

Material: tungsten carbide

Cutting edge diameter: 7 mm, 8mm, 8.5mm, 10mm

Shank diameter: 6mm(approach 1/4 inch)

Total length: 150-160mm

 

Package includes:

4 x Tungsten carbide Rotary point burrs

• Set of 4 Double Cut Solid Carbide Rotary Burr Set, Shank diameter: 6 mm(approach 1/4 inch), Cutting edge diameter: 7mm-10mm, Total length: 150-160 mm
• The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel
• High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc. machining hardness can reach to HRC70
• Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute
• Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect

Product description

Air Die Grinder, Straight, Free Speed 24,000 RPM, HP 0.5 hp, Collet 1/4 in, Exhaust Rear, Variable Speed Yes, Grinder Type Straight, CFM @ Full Load 21.0, Average CFM @ 15 Second Run Time 10.5, Handle Material Aluminum, Min. Hose Size 3/8 in, Overall Length 5 3/4 in, Required Pressure 90 psi, Air Inlet 1/4 in NPT, Bearing Type Ball, Throttle Lever, Characteristics Durable, Includes Wrenches, Duty Industrial

From the Manufacturer

The Chicago Pneumatic Heavy Duty Air Die Grinder is excellent for cleaning tire moldings, porting and relieving engines, high-speed polishing and grinding. Built-in regulator match the speed to the particular job. The rugged, energy efficient 0.5 HP motor delivers a free speed of 24,000 RPM. This die grinder features a a rear exhaust to direct air away from work, an adjustable power regulator for precise control, a lock off throttle to prevent accidental start ups, and a square handle design for positive grip. It measures 5-3/4 inches long and comes complete with a 1/4-inch and 6-millimeter collet.

• Rugged, energy-efficient 1/2 hp motor
• Built-in regulator matches speed to job
• Rear exhaust directs air away from work
• Square handle design for positive grip
• CP Classic Tool- Now comes with 2 year warranty!

User questions & answers

Question:	Where is this made
Answer:	Japan
Question:	Can it be used as a tire buffer
Answer:	Hi, you should used the CP873 or similar because the CP860 is high rpm tool
Question:	Will this tool accept a 3/8 in collet
Answer:	Normally not. If there is an adaptor to reduce from 1/4" maybe. You must try to find it.
Question:	Can a homestyle 5.5cfm compressor run this tool
Answer:	The spec for the tool says 5.25 cfm but does not specify a pressure. I believe the operating pressure is about 90 psi. I use a 25 gallon compressor rated at 9.1 cfm (40 psi) and 7.1 cfm (90 psi). The compressor starts almost immediately and runs continuously during tool operation.

Product features

Chicago Pneumatic CP860 Heavy Duty Air Die Grinder

General maintenance application die grinder, Productivity and control. Excellent for cleaning tires, moldings, porting, relieving engines, and general high-speed polishing and grinding.

Lock-off throttle, Square handle design for greater comfort, 1/4" collet.

• ★【Powerful Angle Grinder】6A motor with 750W max output power, no-load speed of 12000RPM for tough grinding jobs, works more efficiently while cutting, grinding and sanding various materials, such as metal, tile, stone, and wood etc
• ★【More Convenient Operation】Spindle lock for quicker and easier discs & accessories changing, trigger lock-on for comfortable & continuous operation. Auxiliary handles are installed on the left and right sides, for maximum ease to control and cut
• ★【Upgrad Handle】Ergonomic design, with left-mounted slide safety On/Off switch. Removable and forward-canted side handle for greater control and comfort for both right-handed and left-handed users. Small size grip for reduced fatigue
• ★【Safety Protection and Durable】During operation, the protective cover prevents sparks and metal chips during use and protects you from injury. This angle grinder is coated to protect the tool from abrasive debris
• ★【Wide Range of Uses】Widely used for metal rust cleaning, metal cutting, metal grinding, tile cutting, tile grinding, wood cutting and wood grinding