14 best dust collector

Product description

Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. With a 5.7-amp motor moving over 660 cubic feet of air per minute, we can say with confidence that this thing really sucks. The 6-inch impeller combined with the 4-inch dust port inlet lets you connect to your favorite woodworking tools. The four 1-3/4 inch swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs. Take off the wheels and mount it to your shop’s wall with the optional built-in wall mount for accessible dust collection whenever you need it. Compatible with the WEN 10-Foot Dust Hose (model 28200) and the WEN 20-Foot Dust Hose (model 28221). And because its a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• 5.7-amp motor moves over 660 cubic feet of air per minute
• 4-inch dust port allows for connection to your favorite woodworking tools
• Four swivel casters lock in place to prevent unwanted movement during operation
• Compact design features onboard carrying handle for easy storage and transportation
• Mount the unit to the wall of your shop for accessible dust collection whenever you need it

User questions & answers

Question:	Louder or quieter than a shop vac? my shop is located underneath my infant sons room and i've dampened my cnc machine to run it at night
Answer:	Don't know, but it's quieter than my table saw.
Question:	what is the dbA noise raring for the WEN
Answer:	№15 art.3401-015 Hex Head Bolt 9st.
Question:	dimensions of the motor housing to frame mounting-bolts? considering shock mounts and certain specifics are needed to order them... thanks
Answer:	The bag, when inflated, makes the entire unit about 38" long. It's also about 15" tall. I also use it under cabinet and so far it's worked out well.
Question:	What are the rough dimensions of the filtration bag? I'm looking to incorporate this into my cabinet
Answer:	Hi dear Amber Burton, Our engineer guarantees that wood sanding is an easy job for this drywall sander. So yes, we can do it. And if you suffer quality issues because of wood sanding, pls contact us , and we guaranteed that we can offer you a new machine. By the way, pls take care of yourself and wear the necessary PPQ(Personal Protection Equipment) during wood sanding.

Product features

WEN 3401 5.7-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount

Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. With a 5.7-amp motor moving over 660 cubic feet of air per minute, we can say with confidence that this thing really sucks. The 6-inch impeller combined with the 4-inch dust port inlet lets you connect to your favorite woodworking tools.

The four 1-3/4 inch swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs. Take off the wheels and mount it to your shop's wall with the optional built-in wall mount for accessible dust collection whenever you need it.

Compatible with the WEN 10-Foot Dust Hose (model 28200) and the WEN 20-Foot Dust Hose (model 28221).

Features

- 5.7-amp motor moves over 660 cubic feet of air per minute

- 4-inch dust port allows for connection to your favorite woodworking tools

- Four swivel casters lock in place to prevent unwanted movement during operation

- Compact design features onboard carrying handle for easy storage and transportation

- Mount the unit to the wall of your shop for accessible dust collection whenever you need it

Product description

Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker's workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a two-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians. Remember when you could breathe easy in your workshop? Remember WEN. Sound Output: 50-60 dB.

• Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
• Dimensions – 17” L x 20.5” W x 10” H | Electrical Requirements – 120V, 60 Hz, 1A | Air flow – 300/350/400 cubic feet per minute | Cover rooms up to – 400 sq ft. | Noise rating – 50 to 60 dB
• Programmable timer automatically shuts unit off after set number of minutes
• Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
• RF remote system allows for operation from any angle of the room, even if direct line of vision is obstructed

User questions & answers

Question:	Do the filters come with the unit or do you need to buy them separately
Answer:	The unit comes with filters. Replacement you have to buy separately.
Question:	What size room does this cover
Answer:	i think it would work fine for a 2 car garage it states it can filter 400 cubic feet per minute on high i use it with another ambient air cleaner to filter the air in my sharpening business shop which about 600 s.f.
Question:	How does a person know when it is time to change the filter
Answer:	I take a black sharpie and put black lines on the new filter when I can no longer see the lines I know its time to replace.
Question:	I understand you get what you pay for but other than price i see no difference to the jet 708620b. anyone regret buying this unit over the jet
Answer:	Sorry for the extremely late reply, but I thought others might still be comparing the WEN and JET models of air cleaners. The WEN 3417 or 3415T are the units which should be compared directly to the JET 708620b. Those units have virtually identical CFM and hardware specs to the JET. The WEN 3410 you referenced in this question is made for a much smaller space and pumps a lot less air, so it's not really a valid comparison. Compare equivalent models that have similar CFM ratings in order to get a fair idea of how the two brands truly compare. In that scenario, the WEN is a very good alternative to the JET, particularly given the shipping damage many owners have reported when purchasing the JET unit. The units are likely pretty equal, but using poor packaging which provides inadequate shipping protection can turn any 5-star product into a 1-star doorstop. I always check the percentages of 5-star and 1-star reviews to get an idea of the ratio of customers having problems versus perfectly happy customers. You might have a different method.

Product features

WEN 3410 3-Speed Remote-Controlled Air Filtration System

Remember when your workshop was full of clean air? Air-borne wood particulates can dirty up workspaces and seriously harm a respiratory system. The WEN 3-Speed Remote-Controlled Air Filtration System eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The quiet system is controllable from up to 26 feet away via the included remote. The lightweight design weighs in at a mere 31 pounds with hooks for easy installation to any ceiling. Easily switch between three speeds of 300, 350 and 400 CFM depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Just set the timer. The machine will turn off on its own once the time runs out, allowing you to give your workshop a thorough cleanse at the end of a day of woodworking without having to be present.

Fights Airborne Particles

Our 5-micron outer filter removes larger dust particles, while the 1-micron inner filter catches the rest, eliminating 99% of airborne particulates.

Handle and Mounting Hooks

With the lightweight design, move the system freely with the onboard carrying handle or fasten to the ceiling with the included mounting hooks.

Time Delay Feature

The programmable timer lets you leave the system running for an allocated amount of time, turning off automatically once the cycle is complete.

Control from up to 26 Feet Away

Choose between three speeds of 300, 350, and 400 CFM or set the time delay feature using the handy and easy-to-use remote control.

Product description

A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12" steel impeller and a 1-1/2 HP motor that runs on 110V. For wood dust only. Features 2.5 micron filtration.

• Powder coated paint
• Bag volume: 5.4 cubic feet
• Static pressure: 10.1-Inch. Interior Hose Diameter (In.) - 6
• Air suction capacity: Approximately 1,280 CFM
• Standard bag filtration: 2.5 Microns

User questions & answers

Question:	Could someone please comment on the lower fabric bag? Why not a disposable plastic bag
Answer:	one reason, if connected to planer or other rough cutting device, plastic bag would tear on sharp pieces.
Question:	Can the shop fox w1685 1.5-horsepower 1,280 cfm dust collector be run on a 15 amp 120v curcuit
Answer:	The W1685 has a power requirement of 110V, Single‐Phase, 60 Hz. It is prewired to 110V and has a full‐load current rating at 16A. The minimum circuit size is 20A.
Question:	Does anyne make a canister filter that will fit on this machine
Answer:	https://www.grizzly.com/products/Grizzly-Extra-Canister-For-G0548-Z-G0562-Z/H5783 This one was recommended to me by the manufacturer and it fit perfectly.
Question:	Is it easy to move around the shop? I have a concrete floor and want to go back and forth maybe 20 feet. The 1HP unit is supposed to be very mobile. How about this one
Answer:	If you are on concrete, it will be very easy to move around.There are little wheels on it and it rolls very easily with them.I move mine around in my shop on a concrete floor all the time.So you should be able to move it 20' without a problem I would think.

Product features

SHOP FOX W1685 1.5-Horsepower Dust Collector

Keep your workspace free of dust and debris with the Shop Fox W1685 dust collector from Woodstock International. For use with woodworking machines, this dust collector is equipped with a 1-1/2-horsepower, single-phase motor that operates at 3,450 revolutions per minute (RPM), along with a heavy-duty, 12-inch steel impeller that moves 1,280 cubic feet of air per minute. This machine has a powder-coated finish that resists scratches, chipping, fading, and other wear.

Mobile or stationary

This dust collector can be operated as either a stationary, central dust collector or a mobile unit.

6-inch Inlet with Y-Adapter

The W1685 features a 6-inch inlet with a removable Y-fitting with two 4-inch openings. The Y-fitting is used to branch lines to service more than one machine, perfect for those looking for a convenient multi-machine set-up. If two ports are not needed simply remove the fitting to expose a 6-inch inlet or cap-off one of the 4-inch inlets.

Steel Impeller

The W1685 features a steel impeller to handle the wood debris that passes through to the 2.5 micron filter bag. Unlike plastic impellers, the Shop Fox steel impeller offers long lasting performance.

Safety Switch

This dust collector includes a safety switch to protect against unauthorized use. The switch provides a greater degree of safety over other switches due to its oversize paddle and removable lockout key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Product description

Tired of using your wet/dry vacuum and getting poor results? Oneida Air System's Dust Deputy will transform your wet/dry vacuum and the way you work by trapping dust in a barrel and NOT in your vacuum's filter. Injection molded from a translucent anti-static resin, the patented design of Oneida Air's Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss while extending the life of your wet/dry vac! The Oneida Dust Deputy DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. You supply the waste container, the hose, etc. Then add the award-winning Dust Deputy cyclone separator. With the DIY cyclone you're limited only by your imagination! The Dust Deputy will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand! This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2. 0" ports for secure fittings using a variety of hose sizes.

• INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
• LONGER LIFESPAN - Prevents fine dust and large debris from reaching your wet/dry vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy DIY will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand.
• WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports that fit the cuffed 2.5” hoses that come standard with most shop vacuums. Works with most materials: wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
• MADE IN AMERICA – Designed, patented, & manufactured in the USA, our Dust Deputy DIY (Do-It-Yourself) cyclone lets you build the dust control system that’s right for you. Contains the anti-static cyclone separator, gasket, & mounting hardware. You supply the waste container, the hose, etc. With the Dust Deputy DIY cyclone, you're limited only by your imagination! Note: If used with a 5-gallon bucket, the bucket must be a minimum of 90 mils thick or else it may collapse under vacuum pressure.
• US Pat. 6833016, RE40048, 7282074

User questions & answers

Question:	What is the size of the entry and exit ports
Answer:	For my aplication -a sears 2 1/4 inch vac hose to both ports--go to a hardware in the plumbing and get 2 fernco 1 1/2'' x 2'' rubber adaptor---these measurements are deceiving because pvc pipe that use these fittings is measured from the inside THESE GO OVER THE OUT SIDE OF THE PVC HENSE THE CORRECT MEASUREMENTS FOR THIS APPLICATION ----very easy assembly--or return them and try a different size,if yours is different than mine.
Question:	Will this work for wet pickup? Will it separate water from the airflow using a high-flow (approximately 210 CFM) shop vac
Answer:	Yes, water spray is denser than air material, and ANY such material will get separated in a vortex collector. You can put a special foam filter on your shop vacuum interior - the companies make these for wet pickup. This prevents crap from getting into motor intake. If you look at inlet port up inside where the interior of the shop vacuum filter covers, you can clean out leaves and debris there with a screw driver. But much better to not let it get in there at all, since the motor is not made to disassemble and clean. (It should be.)
Question:	Is the flange at the base a standard size with a standard bolt pattern? If not, could I get the ID and OD dimensions
Answer:	Sorry I was slow to get back to you, been out of town. It is a 6 bolt configuration. Bolts I used were 5/16". From bolt to bolt is about 2 1/8". Straight across from outer bolt to outer bolt is 4 1/4". Inside diameter of Cyclone is 3" opening. Whether this is a standard flange I really don't know. You might check standard flange sizes somewhere on internet. Hope this helps.
Question:	anybody put this on 30 gallon steel buckets? the galvanized ones for storing animal food and such
Answer:	Similar. 45 gallon fiber drum. 6 hp shop vac. Works like a charm.

Product description

Introducing the Wall Mounted Dust Collector System by POWERTEC. This compact powerhouse helps maximize your floor space and keep it free from clutter. Whether extracting woodchips or collecting sawdust, this wall mounted dust collector can take on just about any dust producing machine in your shop, right at the source, through a dedicated setup. With its hassle-free mobility, you collect dust and pollutants right at their origin in your shop. Simply attach the dust-collector hose directly to whatever machine you are using and rest easy as this efficient machine successfully eliminates dust/chips from your workroom. Mounting Versatility An included mounting bracket and exclusive clamp and bolt locking system allows you to hang this dust collector on the wall, mounted to a work bench, and even on the floor quickly and without hassle. Easy Dust Disposal Our 2. 5-micron bag ensures optimum air quality, free from fine dust particles and pollutants. It features a window to evaluate dust levels in the bag, and comes equipped with a handy bottom zipper for easy cleaning and dust/ dirt/ debris disposal. Check out the specs on this compact powerhouse: Motor Size: 1 HP 120V/240V Amps: 7 amps at 120V, 3. 5 amps at 240V Motor Speed: 3450 RPM Air FlowithSuction Capacity: 537 CFM Intake Hole Size: 4 inches Filter: 2. 5 Microns Size: 44 inches high with bag inflated Contents: Dust Collector Mounting Bracket Mounting Hardware (bolts and clamp) 2. 5 Micron Filter Bag. Featuring a streamlined design for easy portability. The wall mounting capacity that insures optimum workroom organization and orderliness.

• INCLUDES: Wall Hanging Dust Collector with mounting bracket and 2.5 Micron Dust Collector Filter Bag
• APPLICATION: Used as an integral component to any small shop, shop-vac, and table saw dust collection system – designed to maximize sawdust, shaving and woodchip extraction while immediately capturing dust at the source
• REUSABLE MICRON BAG: Ensures optimal air quality, free from harmful pollutants and fine dust particles – comes with built-in window to view dust level and an easy-dust disposal zipper
• POWER SPECS: Features 1 HP electric motor with dual voltages 120V/240V | 7 amp at 120V, 3.5 amp at 240V; Motor speed: 3450 RPM | Airflow capacity - 537 CFM
• COMPATIBILITY: Possesses a 4 inch inlet port – allowing you to attach the dust-collector hose directly to whatever machine you are using

User questions & answers

Question:	Does it have a plug to use on regular
Answer:	Yes
Question:	Adapters? I cant find the right hoses and am about to return this $200 cyclone because none of the recommended $5 adapters fit
Answer:	I used 4” hose to come out of the cyclone, then used a powertech 70136 4” to 2 1/2” reducer.
Question:	What are the dimensions of the assembled collector with expanded bag (enough space to plan for an area for it to be mounted
Answer:	Plan on approximately 18” wide, and mounting approximately 50” off the floor
Question:	What's the advantage of a dust collector versus a shop vac? Is it more powerful suction wise
Answer:	Volume. A shop vac is great for cleaning up, but you'll have to empty it constantly and replace filters regularly. Dust collectors are bigger, quieter, and move a higher volume of air. Bigger bags and lower micron filter numbers mean cleaner air and less time spent dumping.

Product features

Introducing the Wall Mounted Dust Collector System by POWERTEC.

This compact powerhouse helps maximize your floor space and keep it free from clutter. Whether extracting woodchips or collecting sawdust, this wall mounted dust collector can take on just about any dust producing machine in your shop, right at the source, through a dedicated setup.

With its hassle-free mobility, you collect dust and pollutants right at their origin in your shop. Simply attach the dust-collector hose directly to whatever machine you are using and rest easy as this efficient machine successfully eliminates dust/chips from your workroom.

Contents:

• Dust Collector with 2.5 Micron Filter Bag
• Mounting Bracket & Hardware (bolts and clamp)

Mounting Versatility

An included mounting bracket and exclusive clamp and bolt locking system allows you to hang this dust collector on the wall, mounted to a work bench, and even on the floor – quickly and without hassle.

Safety On/Off Switch

The keyed switch is intended to prevent unauthorized use of the dust collector. Remove the switch key and lock the switch OFF when the dust collector is not in use.

Easy Dust Disposal

Our 2.5-micron bag ensures optimum air quality, free from fine dust particles and pollutants. It has draw string around the neck to hold the bag on while you connect the clamp. The collection bag features a window to evaluate dust levels in the bag, and comes equipped with a handy bottom zipper for easy cleaning and dust/ dirt/ debris disposal.

• ATTACHES TO A 5 GALLON BUCKET IN SECONDS - Use the clips on the dust separtor to attach it to a 5 gallon bucket in seconds! Or use the included hardware to mount it to any sized container.
• RUBBER GASKET AND TIGHT SEALS FOR MAXIMUM SUCTION - Each dust separator has a sturdy rubber gasket to provide the tighest seal possible to maximize the suction from your shop vacuum
• INCLUDED 90° ADAPTER AND HOSE - Unlike competitor versions, ours comes with a 90° adapter and hose for various assembly options
• COLLECTS VACUUM DUST TO PROLONG FILTER LIFE - The Delmar Tools dust separator separates vacuum dust into a separate container, keeping your filter clean and your vacuum running for longer
• LIFETIME WARRANTY - If the dust separatorever fails or is damaged, it is covered by a lifetime manufacturer warranty.

User questions & answers

Question:	How is this with drywall dust
Answer:	Only use this system with my wood shop power tools.... planner, saws, joiner, etc. where it works great. Haven't tried it with drywall jobs, but seems the primary use is to collect any material with any kind of weight, such as wood chips. I really think the drywall dust would tend to flow right through the unit and into your vac.... one reason I don't hook it up to any of my sanders.
Question:	How does this compare to Dustopper sold by Home Depot
Answer:	This product is not affiliated with Dustopper® by Home Depot. This dust separator is manufactured and sold by Delmar Tools. It is a high efficiency dust separator that quickly attaches to 5 gallon buckets or can also be installed on any other container lid. Ours features a rubber gasket for increased suction, as well as an included hose and adapter, whereas competitor ones do not.
Question:	What size is the hose and what size is the 90° fitting ? I don’t see this important info anywhere on this listing
Answer:	They're both the standard 2.5". A shop vac hose fits on both ports.
Question:	How does this compare to Dustopper sold by Home Depot
Answer:	I have never used the Dust Stopper, but this works very well on a 5 gallon bucket, as well as mounted to a trash can.

Product description

This wall mounted Dust Collector is designed to capture dust right at the source, eliminating the reduced efficiency of a duct system. With 537 CFM capacity, it will handle just about any hungry woodworking machine, and with no complicated duct system, static pressure loss is minimal. A simple wall mounted bracket and locking screw system also ensures you'll be safely up and running in no time!

• 1-horsepower motor, 120 or 240V, prewired at 120V, 7 amp at 110V, 3.5 amp at 240V
• Features window to gauge how much dust is in bag and bottom zipper for easy dust disposal
• Single 4-inch intake hole
• 2.5 Micron bag has 2 cubic feet capacity
• 44-inch height with bag inflated

User questions & answers

Question:	Is the impeller plastic or metal
Answer:	Sorry, no they do not, but I bought a cheap simple piezo buzzer from radio shack & a chrome switch & soldered it onto the board for sound, not the greatest buzzer but it works, I recently re-sold 2 of these on ebay because we prefer the Mel Meter with shadow detector built in & the cheaper Ghost Meter, they work much better after we've used all 3 for years, that's why we sold the k-2 it just got famous because they use it on Tv, but the Ghost meter has nice sound & looks good, not the Pro version of Ghost Meter, they kinda ruined it with that version, but just the plain old Ghost Meter, if you have the money spend a $100 on the mel meter if you have more get it with the shadow detector built in, it's works great,
Question:	Does the W1826 come with the cannister filter? The pictures for this item show it both with and without it. The description is equally vague
Answer:	I have had answers to questions. This is a research tool. What you do with the research is up to you. Since nobody has able to prove the tangible existence of ghosts, you have to kind of decide for yourself whether or not you've found ghosts. BUT, if it isn't ghost, it sure is SOMETHING strange because EMF is static doesn't behave like the readings you'll get. Maybe if you get one, YOU'll be he one who can prove what it is or isn't.
Question:	Is a cyclone-type separator recommended with this unit, or is it not needed
Answer:	Actually, this little meter has been around for a long time; only recently coming into fashion for "ghost hunting" expeditions. It can be used by electricians, plumbers heating and air people, burglar alarm companies, etc. in the fields of home building, protecting or repair. Look it up online with the query - "official uses for K-II EMF meter" and this should better answer your question.
Question:	could this be hooked up to a cyclone for better performance
Answer:	I am not sure - I will check with a friend of mine and see what he has to say as He is more knowledgeable on these things. and get back to you if you would like.

Product features

Shop Fox W1844 Dust Collector

This wall-mounted Dust Collector is designed to capture dust right at the source, eliminating the reduced efficiency of a duct system. With 537 CFM capacity, it will handle just about any hungry woodworking machine, and without a complicated duct system, static pressure loss is minimal. A simple wall-mount bracket and locking screw system ensures you'll be safely up and running in no time!

Wall Mount Dust Collector

You have many choices regarding dust collection ducting, but flexible hose is the most common for this size of machine. Flexible rubber hose, polyethylene, plastic flex-hose and other flexible ribbed hose is generally used for short runs. These are manufactured from materials such as polyethylene, PVC, cloth hose dipped in rubber and even metal, including steel and aluminum. If using flex-hose, you should choose one of the many types that are designed specifically for the movement of solid particles, such as wood dust.

Product description

The 50-723 T2 includes motor and blower, support frame, 2 micron Filtration bag with Sewn-In bag ring, 6 mil plastic chip Collection bag, snap-in filter bag ring, 4” intake ports, swivel caster assemblies, two large 8” wheels, cord and Plug.

• Standard 2 micron filtration bag keeps your shop safer and cleaner
• Sewn in, snap-in filter bag ring is faster, easier and eliminates the need for cam-over-lock style Clamps
• Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust
• 6 mil plastic chip collection bag shows you when the bag needs emptying
• Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way

User questions & answers

Question:	Can this be used with a airbrush spray booth
Answer:	Possibly, I would only use it for dust removal.
Question:	What is the warranty for this item
Answer:	Not sure
Question:	How loud is it
Answer:	Surprisingly quiet
Question:	Will this be suitable for a 12’x24’ shed? if i run 3” pvc basically around the entire shed
Answer:	Yes, thats about the same amount of space i have. I run my table saw, my jointer, router table and planer off of this. You may need to put blast gates in at each use point and close the gate on the tools that aren't being used at the time, but this will easily handle that amount of space.

Product features

Delta Power Equipment 50-723T2 1 hp Dust Collector

It’s never easy to do the post cleaning of the workspace after a wood finishing or cutting project is done. It does not only messes up the floor, the equipment but also the air. The Delta Dust Collector helps a great deal to make your life easier as it takes care of the cleaning bit. It keeps the air and the workspace clean as it contains all the dust particles in and around the machine and also the air. To ensure the longevity of the filtration bag it has to be cleaned regularly. The Sewn-in and snap-in filter bag ring is faster and easier to use and removes the need for cam-over-lock style clamps.

Powerful Motor ensures seamless operation

The Dust Collector is enabled with a TEFC induction motor that helps the machine operate smoothly without it being damaged by the dust particles. The Motor gives the machine the speed and efficiency that it needs to contain the dust particles without any hindrance.

Portable and Adjustable

The machine can be moved to the required point easily as it has a steel-based wheels attached at the bottom that is sturdy enough to take the weight of the machine and still glide with ease.

Arrangement to indicate the occupancy of the bag

The 6 mil plastic chip collection bag indicates when the bag the bag is fully occupied and needs cleaning.

Product description

Rikon’s model 60-105 1HP Portable Dust Collector is a convenient size and can be used for many small shop operations. This unit gives the shop owner the versatility to mount the unit on the wall or use the built-in casters and handle to easily move it wherever it needs to go in the shop. The single 4" dust port draws 660 CFM, which is more than enough suction for single machine operation on the big chip makers like a jointer or planer. An adjustable pipe extension with chip collecting funnel allows the suction end to be positioned high for use with lathes, drill presses, workbenches, etc. Includes: 1HP Portable Dust Collector, 2-Micron Cloth Filter Bag, 9' x 4" Hose, Adjustable Pipe, Funnel Attachment System (9-1/4" x 5"), Wall Mounting Bracket and Mounting Hardware.Features: Great for small shops Versatile 2-Micron cloth bag

• Great for small shops
• Versatile
• 2-Micron cloth bag

User questions & answers

Question:	Can the direction facing of the funnel be changed or is it fixed as shown in the picture? Thank you
Answer:	The intake funnel can be faced 360 degrees or moved to another mount. The hose can be connected directly to a machine with a 4" dust port
Question:	Would this be good to use as I carve and it sucks up the wood before going all over the ? Is it noisy
Answer:	This is a highly effective dust collector so yes I believe you will find it effective. Unfortunately no dust collector gets 100%. Noisy, yes I have four dust collectors in my shop. None are quiet if doing their job.
Question:	Can this model handle the dust created by remodeling a kitchen and tearing out the wood lath/plaster
Answer:	This dust collector like most is designed to pick dust generated close to its intake. In my shop I also have an air purifier mounted to the ceiling. Frankly I believe a massive demo will require face masks and aiwinf the dust collector to continue runnig for more than 30 minutes after demo stops ro clean air.
Question:	would this dust collector be able to handle a 6x89 edge sander
Answer:	Yes. I have mine connected to my 8" Powermatic with 10' of 4" hose and it keeps up 99% of the time. There was one situation where the input port clogged from too many chips but that just happenef one time.

Product description

Features:

-The Dust Commander is a cyclone system

-That captures up to 99% of the dust before it reaches your workshop's vacuum

-It is injection molded from a hard anti-static black colored plastic

-He is the ideal companion to your vacuum for filtering/separation of wood dust,

flower, plastic and aluminum chips, etc ...

Specifications:

Size: 320*190*190mm/12.6*7.48*7.48"

Weight: 700g

Material: ABS

Packaging: single color box packaging

Auxiliary fan power: more than 750W (whirlwind fan)

Air volume: 174-280m3/H

Wind pressure: 2.2-22kpa

Dust removal efficiency: 90-99%

Inlet and outlet diameter: 50mm/1.97"

Color:Black/White

Technical parameters:

1) The air volume: 174~280 m3/h

2) Wind pressure: 2.5~22 kpa

3) Wind speed: 18~28 m/s

4) Efficiency: 99%

5) Dust Particles: 0.3 um - 40 mm

Usage:

1. Connect with the centrifugal fan.

2. Connect with the industrial vacuum cleaner.

3. Connect with the household vacuum cleaner.

Application:

Widely used in all industries, such as: machinery, textiles, home improvement, food, food, coal, cement, building materials, thermal power, metallurgy, steel, cleaning vehicles, dust removal equipment manufacturing and personal processing centers to create dust removal facilities!

• Points for attention: In order to ensure the normal use of cyclone dust collector, the inlet air volume must be far greater than the dust content, the minimum air intake must be greater than 70%, otherwise there will be "choking dust" phenomenon, that is, a large amount of dust into the vacuum.
• This is because the working principle of the cyclone dust collector is different from that of the bag dust collector, so it is absolutely impossible to use the cyclone dust collector like a pumping unit, and bury the suction nozzle in the dust. If you do that, because there is no air in the dust collector or or the air content is too small, the upward discharge can only be "ash"!
• Can completely replace: bag-type dust removal equipment, it has: simple manufacturing process, ultra-low production costs, lower operating costs, dust removal efficiency and pressure constant, basic maintenance-free advantages are incomparable bag-type dust removal.
• The working principle of cyclone collector is: The mixture of dust and gas enters the dust collector along the horizontal pipe, rotates and settles at a high speed downward along the wall of the barrel, and "dust" falls into the dust barrel below under the strong centrifugal force and its own gravity, and the clean dust gas is discharged upward along the central pipe.
• The sixth generation turbocharged cyclone dust collector is widely used in all industries, such as machinery, textile, household appliances, food, grain, coal, cement, building materials, thermal power, metallurgy, steel, sweeper, dust removal equipment manufacturing and personal processing center manufacturing dust removal facilities.

Product features

Connect with the centrifugal fan

Connect industrial vacuum cleaner

Connect a household vacuum cleaner

Specifications:

Size: 320*190*190mm/12.6*7.48*7.48"

Weight: 700g

Material: ABS

Packaging: single color box packaging

Auxiliary fan power: more than 750W (whirlwind fan)

Air volume: 174-280m3/H

Wind pressure: 2.2-22kpa

Dust removal efficiency: 90-99%

Inlet and outlet diameter: 50mm/1.97"

Color:Black/White

Application:

Widely used in all industries, such as: machinery, textiles, home improvement, food, food, coal, cement, building materials, thermal power, metallurgy, steel, cleaning vehicles, dust removal equipment manufacturing and personal processing centers to create dust removal facilities!

• High Efficiency: Makartt dust collector is equipped with 2 strong motors, with high efficiency in dust cleaning, providing a comfortable filling process for you.
• Adjustable Suction: This nail dust collector machine with the adjustable suction switch, it's convenient to adjust suction according to your need.
• Functional Nail Machine: The machine can be used to clean dust produced by removing gel nail polish, poly nail gel, dipping powder, acrylic nails, etc.
• Durable to use: The dust collector is made of high-quality stainless steel, durable to clean the dust away.
• Easy to clean: The reusable filter helps your blow away the dust easily with a hairdryer.

User questions & answers

Question:	What’s the rpm fan speed and the max airflow specs
Answer:	Thanks for your question. Airflow of this makartt nail dust collector is8.2m/s, and the Motor rpm is 5200rpm/min. Hope this answer is helpful for you.
Question:	Does this help to keep you from breathing in the dust as you are doing your own nails
Answer:	Yes, most definitely! I would still recommend using a mask as a backup but ever since using this dust collector I've noticed a huge difference. Its definitely made the biggest difference and I'm so glad I made the purchase.
Question:	Where can I get Replacement filters
Answer:	You would reuse the filter, dump out powder/vacuum it (the pic shows blowing it, I don’t recommend that), you use the same filter about three months and then you swap out for a new one, paperwork in the box comes with their company’s information on replacements.
Question:	The plug for my dust collector does not go all the way in, so sometimes the dust collector shuts off. Is there a replacement plug
Answer:	Definitely reach out to Markartt! It's not supposed to be like that at all. Mine is not. Sounds dangerous as well

Product features

Why Choose Makartt Non-spilling Nail Dust Suction Collector?

Makartt Nail Dust Machine 60W

Makartt nail vacuum pull down nail dust easily, it helps keep room relatively dust free and keep from inhaling a lot of the dust. If you do a lot of gel polish removal of acrylic nails.

How to Clean Nail Dust Collector

• Clean it with hair dryer or take the filter out to shake dust out
• Replase filter 3-4 month
• Don't wash it with water, if you have to do that, please make sure to blow-dry it after you wash it

Longevity and Stable Performance

The circular design is evenly distributed and its heat dissipation can ensure that the machine is not easy to be hot during workin.

Adjustable Buttons

This vacuuming machine has adjustable buttons to select the speed of wind based on the degree of dust, maximum speed of revolution: 5200RPM/60W.

Enjoy Your Free Breath

Two motors nail vacuum make you stay away from dust, no matter how long you work, your desk is as clean as ever.

Product description

Bucktool's dust collector can be used with table saws, band saws, bench belt sander, and other machines that need to be vacuumed to realize the dust collection system function and help you get a clean working environment. It can deal with general-purpose wood, plastics, and other materials. After woodworking operations including surfacing, finishing, sanding, grinding, polishing, and deburring, help you efficiently vacuum.



Bucktool's 1.2 HP Auto Start Dust Collector has a power outlet for your power tool, just plugin and it will auto start each time when you switch on your tool!



User-friendly design makes dust collector bag change more Easier and Safer.



All the parts are made by metal, fan blade was balanced which delivers long life, powerful ball bearing induction motor that supplies the needed power running under load. The maximum suction is reached 3450 times per minute.



The safely supported base can withstand the weight of the machine effectively. The removable casters are very smooth and can be easily moved on any ground. This mobile base can be easily operated in the entire store. It is convenient and powerful to store and absorb more dust, can reduce the hassle of cleaning, and obtain a clean environment.



Dust Collector Product Information:



Motor: 120V 60Hz, 1.2Hp



Speed (no load):3450RPM



Air suction capacity: 750 CFM,



Max. Static Pressure 8.5inch



Standard bag filtration: 2.5 micron



Bag volume: 5.4 cubic feet

• Power：1.2 HP, 120V motor, 3450 RPM，750CFM CSA listed . Full load Amp 6.5A.
• Auto-start function：User friendly auto-start function provides power outlet for your power tools, no longer need to find a new outlet for your tools but also reduces the trouble of frequent opening and closing, can be connected with machine 7A Max
• Easy bag install:The well-designed clasp makes bag install and removal easy, soft PET bag clamp won't cut your hand
• Versatile size: features a portable base size of 16-1/2 x 26-3/8 inches and caster wheels, working as both a mobile or stationary compact dust collector unit that maximizes shop space
• Include: 5 pcs reducer; 5 ft. x 4 in. dia. flexible dust extraction hose; Plastic Lower collection bag; cloth lower collection bag; 2.5-micron Cloth upper collection bag; PET bag clamp

User questions & answers

Question:	Can this be used with a full duct system
Answer:	METAL
Question:	Where is it made
Answer:	Comes with filter bag only with zipper on bottom of bag. Works great for me. I don’t remove bag, just unzip and dump into plastic trash bag. I’ve found the dust collector to work very well with my sawstop.
Question:	is there a cyclone dust seperator between the top and bottom bag
Answer:	An additional cyclone is not needed. Adding one will however reduce the frequency at which you have to empty the bag.
Question:	is it more powerful then a rigid dust collector
Answer:	Yes, even a basic homemade chip separator would improve performance.

Product features

Forget to switch on the dust collector?

Bucktool's 1.2 HP Auto Start Dust Collector has a power outlet for your power tool, just plugin and it will auto start each time when you switch on your tool!

Bucktool's shop dust collector can be used with table saws, band saws, bench belt sander, and other machines that need to be vacuumed to realize the dust collection system function and help you get a clean working environment. It can deal with general-purpose wood, plastics, and other materials. After woodworking operations including surfacing, finishing, sanding, grinding, polishing, and deburring, help you efficiently vacuum.

The large-capacity dust bag can hold 5.4 cubic feet of debris and wood chips so you do not need to clean the dust collector frequently.

All the parts are made by metal, fan blade was balanced which delivers long life, powerful ball bearing induction motor that supplies the needed power running under load. The maximum suction is reached 3450 times per minute.

The safely supported base is very strong and can withstand the weight of the machine effectively. Removable casters are very smooth and can be easily moved on any ground. This mobile base can be easily operated in the entire store while saving a lot of space. It is convenient and powerful to store and absorb more dust, can reduce the hassle of cleaning, and obtain a clean environment.

Product Information:

Motor: 120V 60Hz, 1.2Hp

Speed (no load):3450RPM

Air suction capacity: 750 CFM,

Max. Static Pressure 8.5inch

Standard bag filtration: 2.5 micron

Bag volume: 5.4 cubic feet

Powerful and Efficient Dust Collector

1.2Hp induction ball bearing motor with power outlet. It has a more powerful suction and longer life, which can ensure the smooth, efficient, and quiet operation of the dust collector.

Durable and High-quality Accessories

High-quality flexible dust extraction hose with 5 PCS reducer accessory. Allow you to control the suction speed flexibly.

Easy Removal Collection Bag

With soft and safe PET bag clamp. Easily install and remove the collection bag without cutting hands.

Convenient and Humanization Design

Cloth lower collection bag with zipping and window. You can easy to clean the dust collection bag without removing it.

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

Ideal for use in a smaller home shop, the JET 708620B AFS-1000B 550/702/1044 CFM 3-Speed Air Filtration System with Remote and Electrostatic Pre-Filter simply hangs from the ceiling and clears the room of fine dust particles that can compromise air quality in your workspace. This unit can be used with or without a Jet dust collector and comes complete with a remote control, timer, and three-speed capability for powerful performance.

Two-Filter Process Removes a Range of Micron Particles

By quickly and quietly cleaning and filtering 90 percent of all five-micron particles and 80 percent of all one-micron particles, the 708620B ensures a cleaner and healthier shop environment. This system works via a two-filter process: an outer filter removes larger particle while the inner, three-pocket filter traps smaller particles. The end result is less dust and debris compromising air quality in your shop.

Three Speeds and Timer Settings for Efficient Filtration

The system's three-speed (550, 702, and 1044 CFM) motor gives you the flexibility to choose the most efficient air filtration for your shop. For added convenience, the remote control lets you control all the system's functions while it hangs from a ceiling or is placed high up on a shelf. Built-in timer settings for two, four, and eight hours will shut off automatically at the end of the designated time, cleaning the air in your shop even while you're away.

Ball bearing Motor for Fast, Powerful Performance

Thanks to the fully-enclosed, 1/6 HP, ball-bearing motor with overload protection, the 708620B has the capability of filtering the air in a shop measuring 20 x 20 x 8 feet in less than five minutes. It can also filter the air in that same-size shop over 12 times an hour.

Easy-Care Design for Fast Clean-Up

The 708620B is easy to clean. The electrostatic outer filter withstands several washings, and the inner filter can be blown clean simply with compressed air. For added convenience, this handy machine also features grip handles for portability and rubber feet to prevent marring your work surface.

Durable Construction and Electrostatic Filter for Better Performance

Constructed of a heavy-duty, powder-coated metal box, and featuring a powerful motor and fan, the 708620B offers exceptional durability for years of use. For reliable performance, it also comes standard with an electrostatic filter that is electronically charged to attract many more dust particles than other standard filters.

The 708620B measures 30.25 x 24 x 12 inches (WxHxD), weighs 54 pounds, and is backed by a five-year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

One air filtration system, one remote control, two "AAA" batteries, four eye bolts and nuts, four mounting brackets, eight hex cap screws, eight lock washers, four foam pads, one Velcro pad, and one manual and warranty card.

From the Manufacturer

This remote-controlled air filtration system cleans and circulates air. Runs quietly. Filters 98% of all 5-micron particles and 85% of all 1-micron particles. Uses a convenient standard-size outer filter.

FEATURES

• Features a handy remote control that can be used to adjust the three speeds, timer and on/off
• Quietly cleans and filters the air in your shop while you work.
• Filtering 98% of all particles 5 microns in size and 85% of all particles 1 micron in size
• Use in conjunction with a JET dust collector for maximum dust control
• Unit comes complete with eyebolts to either hang the machine from the ceiling or to sit on a workbench
• System features a convenient built in timer that can be set at 2, 4, or 8 hour increments. Turn the timer on when you enter the shop and forget about it. System will shut itself off at the hour interval you set
• Constructed of a heavy-duty, powder coated metal box and powerful motor and fan for added durability
• Comes standard with an electrostatic filter that is electronically charged to attract many more dust particles than other standard filters
• Three speeds (550, 702, and 1044 CFM)
• Has the capability of filtering the air in a 20' x 20' x 8' shop in under five minutes. It can filter the air in that shop over 12 times an hour
• Two easy grip handles are inset into both sides for ease of movement
• Filters are easily replaceable, no tools required
• The inner three pocket filter fits inside and can be blown out or washed out if preferred
• Comes with sealed inner filter

STANDARD EQUIPMENT

• Remote control
• 5 micron prefilter
• Electrostatic outer filter
• 1 Micron inner filter
• Eyebolts for hanging

• EFFICIENCY: Outer filter captures 98% of 5-micron particles, while inner filter captures 85% of 1-micron particles.
• CONVENIENCE: Remote control has built-in timer with 2/4/8-hour settings. System automatically shuts off.
• VERSATILITY: Hang from shop ceiling or place on workbench (rubber feet prevent marring).
• REUSABLE: Inner pocket filter is removable for easy cleaning.
• PORTABILITY: Easy grip handles allow easy mobility of unit.

User questions & answers

Question:	Does anyone know why this the prefilter is described as "electrostatic." There appears to be no electrodes or DC voltage supplies internally
Answer:	Here's the answer to how electrostatic filters work (from eHow.com) -- "The secret to the electrostatic air filter's effectiveness is the polyurethane and polypropylene blends used in the filtering material. The fibers have been formulated so that when air passes by them, they generate strong static charges. Separate layers of filtration material also receive opposite charges (positive and negative). Since positively charged particles are attracted to surfaces with negative static charges and vice versa, the filtration media can actually attract airborne particles like a magnet and hold on to them until the filter is cleaned. When a particle of dust, mold, fungi or any other airborne matter comes from the HVAC system and through the ducts toward the filter, it first passes through a synthetic filter layer with a positive static charge. This positive charge gets transferred to the airborne particle. Then the particle passes through a layer with a negative charge, and it is attracted to that layer's surface. The more layers of oppositely-charged filtration media there are in the filter, the more effectively it can prevent airborne particles from entering the room."
Question:	It says must be mounted 7feet off floor. Is this just for safety? Are is it for proper operating of unit
Answer:	I never saw a notice to mount it a minimum of 7 feet off the floor. Mine is mounted about 1.5 feet down from a 10 foot ceiling so with the height of the unit makes it about 7+ feet off the floor. It is mounted over a workbench so there is no danger of hitting it with work pieces moving around, but it seems like the right height for the unit. I would think that you could mount it at any height that would make sure you don't hit it with moving your work pieces around. As for operating the unit, it seems to me that the closer you can place it to the source of dust and airborne particulates, is the best place to mount it.
Question:	My shop is 27x27 with 20 ft ceilings. Will this unit filter the air efficiently in such a large space
Answer:	Could not say for sure but a couple of comments to possibly make it more effective. if you could possibly hang the unit well down from the 20 foot ceiling and position equipment that generates significant dust in closer proximity that should compensate for the large space. I have not put my unit to the test so far to give you a better feel for cleaning capacity but my 13 X 14 shop opens up to a basement storage area o that would make it a similar size to a 27X27 with about a 9 ft ceiling. So far I have not noticed any excessive dust in the storage area but again i have not really pushed it enough to be conclusive.
Question:	Is it better to hang this unit from the ceiling against a wall or hang it centrally located? I don't know which position will have a "better" airflow
Answer:	I have several of these and I could not disagree more about a central location install. Put this where you create most dust PERIOD. The main dust created from your work should be able to easily float right up into to the air scrubber, If that's your miter station you set it right over the miter station. This gets hung from the ceiling not on a wall. If you place this in the center of the shop or room it's going to try to pull that dust to the center of room and there may not be any dust ether to begin with why pull dust through the shop if you dont have to?I have one over my Miter station, one over my Band Saw and the third larger unit in the center of the shop. But if I only had one air scrubber that thing would be wherever the majority of my dust is made, not just in the center or in an arbitrary corner.And always by a few smaller units than one large unit, I made that mistake initally. If you can afford the big version of this just get two of these smaller units and put each one over the ares you create the most dust.

Product features

AFS-1000B, 1000 CFM Air Filtration System, 3-Speed, with Remote Control

This powerful unit is perfect for the smaller home shop. Simply hang it from the ceiling turn it on and it will clear the room of those fine dust particles. This unit was the first in the industry with remote control, timer and three speeds which have quickly become the industry standard.

1,000 CFM Heavy-Duty Air Filtration System with Remote Control

- Remote Control has built-in timer with 2, 4 and 8-hour settings.

- Two-Filter System with Air Diffuser disperses outgoing air into a broader pattern.

- Disposable Electrostatic Outer Filter attracts more dust particles than standard filters Inner Pocket Filter is removable for easy cleaning.

- Easy Grip Handles allow easy portability of unit.

- Four Eye Bolts let you hang unit from shop ceiling.

- Inner Pocket Filter is removable for easy cleaning.

- Fully-Enclosed Ball Bearing Motor with Overload Protection for long, dependable service.

- Automatically shuts system off at the end of the time setting.

- Rubber Feet prevent marring of surface when placed on workbench.

Includes:

- 1,000 CFM Heavy-Duty Air Filtration System w/ Remote Control - 708620B.

- Remote Control.

• [Save 20% on dust filter bag when you purchase wall-mount dust collector] 1HP Powerful Induction Motor with 6.5AMP 550CFM air flow
• 4inch x 80inch Hose
• Steel Impeller supply 550 CFM Air Flow
• 2 Micron dust bag. To ensure a better experience, we suggest matching with our 2 micron filter bag
• We have wall mount function and the wheels with brake for easy movement and fix position

User questions & answers

Question:	What is the rpm of the motor
Answer:	Dear customer, The impeller speed of the dust collector is 3450 RPM.
Question:	El motor funciona con 220V
Answer:	Dear Customer, the motor was designed only can use with 120V.
Question:	The description on amazon says the dust collector delivers 550 cfm of suction, but the motor says 300 cfm. which is the correct cfm
Answer:	thisis the 550, I needed at least five hundred for the miter saw
Question:	Can anyone who owns this confirm that it has Steel Impeller as stated? Most are aluminium
Answer:	It looks like steel to me.

Product features

About BUCKTOOL Wall-mounted Dust Collector

BUCKTOOL wall mounted Dust Collector is designed to capture dust right at the source. The portable dust collector produces more suction than ordinary shop vacuums. With a 13 gal. capacity dust bag the dust collector works with 4 in. hoses to pick up large chips from jointers, saws, shapers, and planers. A simple wall-mounted bracket and locking screw system also ensure you'll be safely up and running in no time! This wall-mounted dust collector with 550 CFM capacity makes it very versatile, it will handle just about any hungry woodworking machine, and with dust collection located next to dust production with minimal ducting, static pressure loss is minimal.

Product Information

Motor size: 1 HP 120V single-phase

Air suction capacity: 550 CFM

Impeller speed: 3450 RPM

Amps: 6.5 Amp

Intake hole diameter: 4-Inch

Bag size: 3.1 CU.FT

Impeller: Balanced steel radial fin（9 inch）

Maximum static pressure: 1440Pa（5.8inH2O）

Caster

Wheels with brake for easy movement and fix position.

Safety Cap

Prevent your hand from touching the fan blade.

High Quality 4” Hose , 80” Long

High quality 4” hose can fit most of the woodworking machine.

Wall-mount Design

The dust collector can be mounted on the wall by using the wall mount kits, easy for use and save your valuable space.