12 best makita demolition hammers

Product description

Demolition Breaker Hammer, Amps @ 120V 14 A, Impact Energy (Ft. -Lb. ) 25. 7 lb. , Blows per Minute 730-1450, Drive System 1 1/8 Hex, Features Soft Start Variable Speed, Handle Type D, Tool Length (In. ) 32-1/2 In. , Tool Weight (Lb. ) 38. 2 lb. , Includes Tool Case, Bit

From the Manufacturer

Makita's new 35 lb. Demolition Hammer, 1-1/8-Inch Hex, with Rolling Case has many features to help the end user get the job done. It has Adjustable D-Handle rotates 3600 and pivots. In-Line Design engineered better balance for horizontal applications. Accepts commonly used 1-1/8-Inch Hex and air tool steel. Retaining Collar for extra bit support. 11-Inch Bull Point Chisel included in case. Soft Ergonomic Grip can be used w/ both hands if necessary. Easy On/Off Switch one finger operation. Variable Speed Dial in Convenient Location.

• Powerful 14 AMP motor delivers 25.7 ft.lbs. of impact energy to handle the most demanding applications
• Constant Speed Control automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs
• Soft Start suppresses start-up reaction for smoother start-ups and better accuracy
• L.E.D. Service Light notifies the user approximately 8 hours before the brushes need to be replaced and L.E.D. Power Lights indicate switch failure or cord damage
• Variable Speed control dial enables user to match the speed to the application for greater versatility
• Extended Life Brushes are longer for more work between service intervals and less downtime
• For added convenience, the HM1307CB has a 16.4 ft. cord and accepts 1-1/8” Hex Bits for a wide variety of demolition applications. Includes a 20-1/2" Bull Point, 1-1/8" Hex and a Plastic Tool Case.

User questions & answers

Question:	Can I use a smaller hammer to remove 4-5” concrete pad
Answer:	120 volts as I read.
Question:	Will it penetrate basalt rock in a timely manner
Answer:	This may be difficult for such a small area of an inch or two. You'll have to use a smaller chisel to carve out whatever area you need. Score it like perforated paper and slowly take out the broken pieces. Don't rush.
Question:	Would this tool drive ground rods in rocky soil
Answer:	No, its 120 volt, regular USA plug. I thought the same thing as you when i saw 3600 watts. I researched it and 3600 watts is a theoretical instantaneous peak. I connected my hammer to a power meter and during normal operation of breaking up a concrete floor the continuous power draw was only 250-350 watts. In fact , I could not force my hammer to draw more than 500 watts. I don't know what one would do to make it pull 3600 watts!
Question:	is the body made of steel or plastic
Answer:	It will break rock. If you are breaking solid, thick limestone, it may be a little tough going. I'm not sure whether a 35-lb would be sufficient, or if a 70-lb hammer would be better for you, but this will break rock. A lot of folks, myself included, have had some issues, likely with an o-ring, where the hammer leaks oil from above the chisel. But the hammer itself continues to work and has good power.

Product features

Makita HM1307CB

The Makita HM1307CB 35 lb. Demolition Hammer combines hard-hitting power with additional features including soft start and a variable speed control dial for improved performance. The HM1307CB accepts 1-1/8” Hex Bits, and is ideal for both horizontal and vertical demolition and breaking applications.

14 AMP Power

The HM1307CB is engineered with a 14 AMP motor that provides 730-1,450 BPM and 34.9 joules (25.7 ft.lbs.) of impact energy, with constant speed control that automatically applies additional power to the motor to maintain speed under load. Consistent with the rest of Makita’s concrete hammer line-up, the HM1307CB is engineered with the Makita Motor Advantage. This includes field core interlocking steel laminations, dual ball bearing armature, and large surface commutator. These features deliver the most efficient transfer of energy for more power and longer tool life.

Additional performance features include soft start, which suppresses start-up reaction for more control and greater accuracy. The L.E.D. service/power indicator indicates switch failure or cord damage, and also notifies the user approximately 8 hours before the brushes need to be replaced. At the same time, the HM1307CB is engineered with extended life brushes.

The HM1307CB has a large side handle with an easy-to-operate switch control. For added convenience, the HM1307CB has a 16.4 ft. cord and accepts 1-1/8” Hex Bits for a wide variety of demolition applications.

Specifications

• AMPS: 14
• Blows Per Minute (variable speed): 730 - 1,450 BPM
• Impact Energy (ft.lbs.): 25.7
• Vibration Control : No
• Vibration (m/s²): 12
• Noise Level: 101 dB
• Cord Length (ft): 16.4'
• Overall Length: 32-1/2"
• Bit Type: 1-1/8" Hex
• Breaker/Demo>

Product description

The Makita 11 lb. Demolition Hammer (HM0870C) has more power with 8. 4 ft. lb. of impact energy, yet weighs only 11. 1 lbs. The HM0870C (accepts SDS-MAX bits) has constant speed control that automatically applies additional power to the motor to maintain speed under load. The 12 bit angle settings allows the bit to be set a different positions for operator comfort. The Makita HM0870C Demolition Hammer is ideal for horizontal work.

From the Manufacturer

Makita small demolition hammer is designed to hit hard for tough jobs. It is small but very powerful for quick removal of material. Includes 11 lb. SDS-Max Demolition Hammer with Case - HM0870C, Side Handle, Bit Grease, Cleaning Cloth, Tool Case

• Powerful 10 AMP motor delivers 8. 4 ft. lbs. of impact energy to handle the most demanding applications
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• Easy-to-operate slide switch increases productivity and allows for continuous use
• L. E. D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• L. E. D. power light indicates switch failure or cord damage
• Powerful 10.0 AMP Motor & Compact Design

User questions & answers

Question:	What is the frequency of this hammer 50/60hz
Answer:	The D25951K has a weight of 41.300 LBS ( the whole kit). The tool itself weighs 29.3 LBS.
Question:	this makita include storage case
Answer:	It is a 15 amp motor. To figure out wattage- multiply the amp rating by 120 (in North America). For example, a table or miter saw rated at 15 amps will require around 1800 watts continuous, thus a 2500 watt generator, inverter or transformer would be the absolute minimum, with a larger unit being ideal. Also keep in mind- inverters, generators and transformers have widely differing designs and power quality.
Question:	Frequency of the tool I know it's 110v but what is the frequency 50/60hz
Answer:	The hammer is 29 pounds. Possibly the 40 pounds is referring to shipping weight.
Question:	How much does it cost the shipping and delivery to colombia...?¿.. Bogotá Colombia Latin America. Thnx
Answer:	Yes, the D25951K will include a kit box.

Product description

Dig, chip, and break concrete more efficiently--and with less unwanted vibration--using the HM1214C demolition hammer from Makita. This tool features the company's exclusive Anti-Vibration Technology (AVT) to limit vibrations and improve performance. A powerful 14-amp engine produces 950 to 1,900 blows per minute (BPM), while an automatic brush cutoff system helps increase the tool's life. An electronic dial lets you adjust the speed to fit your project. This model includes a 1 inch SDS-Plus Rotary Hammer.

• Voltage: 120.00
• Includes 1 in Rotary Hammer HR2475
• Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• 12 bit angle settings allow the bit to be set at different positions for operating convenience
• Powerful 14.0 AMP motor to handle the most demanding applications

User questions & answers

Question:	What kind of bits do these items come with
Answer:	Sds bits
Question:	Is the 27 too heavy to use horizontally on a wall
Answer:	It depends a lot on the person. It will definitely wear your arms out if you have to use it for prolonged periods horizontally. That having been said we did use it quite extensively for horizontal demo and it works great
Question:	Is this sds max bit capable
Answer:	Yes, it is. I bought the Bosch HS1903 SDS-max 1 x 16-Inch Rtec Flat Chisel, and it worked perfect with it.
Question:	Does this item come with a case
Answer:	Yes, the 27 lb. demolition hammer comes in a nice hard rolling case and the smaller rotary hammer drill comes in its own hard carrying case.

Product description

The Makita 23 lb. AVT Demolition Hammer has a powerful 14 AMP motor that delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications. It weighs 23.8 lbs. The demolition hammer features Anti-Vibration Technology (AVT ) and vibration-absorbing rear handle to further reduce vibration. Constant speed control that automatically applies additional power to the motor to maintain speed under load to complete challenging jobs and a variable speed control dial enables users to match speed to the application. The HM1213C has a "soft no-load" function automatically reduces the speed of the motor when not in use which helps increase tool life and performance. The Makita Motor is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.Other features include an L.E.D. power light to indicate switch failure or cord damage and an L.E.D service light that notifies the user that the brushes need to be replaced. An automatic brush cut-off protects the commutator from damage for longer tool life. The 12 bit angle settings allows the bit to be set a different positions for operator comfort.Anti-Vibration Technology (AVT ) is a counterbalance system inside the tool that significantly reduces vibration. The AVT counterbalance design is based on seismic engineering, which developed this damping science to absorb shocks and protect buildings from earthquakes. AVT uses a mechanical damper, effectively a counterbalance weight inside the tool, that provides an equal and opposite force that puts a mass directly opposite the point where the striker bolt delivers the impact. As vibration is eliminated, power is efficiently increased which allows more of the generated energy in the motor to be delivered to the tool bit. For users, AVT means significantly less vibration with no compromise in power and performance.

• Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications
• Anti-Vibration Technology (AVT) is an internal counterbalance system that greatly reduces vibration
• Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more precision and better accuracy

User questions & answers

Question:	I just received the remote. how do i make it work. i forgot my password and i need to unlock tiger dvr i guess... i placed the battery but doenot work
Answer:	No it will not
Question:	Will this work on a samsung sdr-b75303n
Answer:	There is a harness connector that comes out of the amp to connect the speakers to it.
Question:	Does this work for the snr-73200wn
Answer:	No it’s not. It’s 4 ohm stable
Question:	Does this remote work on sdr
Answer:	The power rail has red 12v positive, black negative, and blue 12v remote on you should wire to an accessory line or a switch.

Product description

Makita’s versatile HR2475 1-inch rotary hammer (accepts SDS-Plus) delivers more efficient hitting in a compact size for faster, more productive work.

Makita's versatile HR2475 1-inch Rotary Hammer (Accepts SDS-PLUS) delivers more efficient hitting in a compact size for faster, more productive work.

7 AMP Motor Delivers 4,500 BPM

The HR2475 is powered by a 7 amp motor that delivers a no load speed of 0-1,100 rpm, with 0-4,500 BPM and 2.7 joules of impact energy. Three-mode operation includes "Rotation Only," "Hammering with Rotation," and "Hammering Only" for multiple applications.

Makita Motor Advantage

Consistent with the rest of Makita's rotary hammer line-up, the HR2475 is engineered with the Makita Motor Advantage. This includes field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars. These features deliver the most efficient transfer of energy for more power and longer tool life.

More Efficient Work

Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. The sequential impact timing feature delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50 percent faster drilling.

Comfort and Ease of Use

Comfort and ease-of-use features include an ergonomic and well-balanced design with a rubberized D-handle comfort grip and a soft grip side handle. Additional features include a one-touch sliding chuck for easy bit changes, a recessed lock-on button for continuous use, and a large trigger switch. The multiple chisel positioning allows the bit to be set at 40 different positions to align with the application. The extended life brushes are longer for less downtime and more work between service intervals.

Versatile Design for a Range of Applications

The HR2475 is a versatile and hard-hitting rotary hammer for masons, remodelers, electricians, maintenance crews, and general contractors seeking a best-in-class 1-inch rotary hammer. The HR2475 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Rotary Hammers

Makita's concrete rotary hammers deliver hard-hitting performance and more productivity with less vibration. Makita rotary hammers are engineered with the Makita Motor Advantage, which includes field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life. Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50 percent faster drilling. The constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita HR2475 1-Inch D-Handle Rotary Hammer includes: side handle, depth gauge, and tool case.

From the Manufacturer

Makita's new 1 inch rotary Hammer has a powerful 7amp motor 0-1100rpm& 0-4,500 rpm for demanding applications. It has a three mode operation: rotation only, hammering with rotation or hammering only. A one touch sliding chuck allows for quick bit changes. This Makita Hammer has 40 different angle settings for increased convenience.

• Powerful 7.0 AMP motor delivers 0 to 1,100 RPM & 0 to 4,500 BPM for the most demanding applications
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50 percent faster drilling
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Extended life brushes are longer for more work between service intervals and less downtime
• 40 bit angle settings allow the bit to be set at different positions for operating convenience; Optimum Range (concrete drilling) 3/16 to 1/2 inch max. capacity (concrete drilling) 1 inch
• 3 mode operation for ""Rotation Only"", ""Hammering with Rotation"" or ""Hammering Only"" for multiple applications

User questions & answers

Question:	How much weight
Answer:	Yes, it's adjustable to fit all phones.
Question:	can this be used to remove (Chizel) ceramic wall and floor tile from drywall and wood
Answer:	I think it works with any phone.
Question:	Can somebody send me a picture of what they got? Is it like the one in the picture? What does tool only mean
Answer:	That's correct. I have the same style Lexus and I cannot fit the product on the vents in the middle of the dashboard; it fits awkwardly on the vent in the left-hand side of the steering wheel but it is very unsteady and not easy to use. I was very disappointed.
Question:	Can you send me one similar to 220 v? At APO address
Answer:	Yes, the clip rotates. You can clip it horizontal or vertical.

Product features

Makita HR2475 1" Rotary Hammer, accepts SDS-PLUS bits (D-handle)

Makita’s versatile HR2475 1-inch Rotary Hammer (Accepts SDS-PLUS) delivers more efficient hitting in a compact size for faster, more productive work.

7 AMP Motor Delivers 4,500 BPM

The HR2475 is powered by a 7 AMP motor that delivers a no load speed of 0-1,100 RPM, with 0-4,500 BPM and 2.7 Joules of impact energy. Three-mode operation includes “Rotation Only,” “Hammering with Rotation” and “Hammering Only” for multiple applications.

Makita Motor Advantage

Consistent with the rest of Makita’s rotary hammer line-up, the HR2475 is engineered with the Makita Motor Advantage. This includes field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars. These features deliver the most efficient transfer of energy for more power and longer tool life.

More Efficient Work

Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. The sequential impact timing feature delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50% faster drilling.

Comfort and Ease of Use

Features include an ergonomic and well-balanced design with a rubberized D-handle comfort grip and a soft grip side handle. Additional features include a one-touch sliding chuck for easy bit changes, a recessed lock-on button for continuous use, and a large trigger switch. The multiple chisel positioning allows the bit to be set at 40 different positions to align with the application.

Product description

The Makita 18V X2 LXT (36V) Brushless 1-9/16” advanced AVT rotary hammer with AWS is a cordless concrete solution that’s loaded with advanced engineering for maximum efficiency. It’S equipped with auto-start wireless system (AWS) for wireless connectivity with an aws-equipped dust extractor (sold separately), and features advanced AVT for reduced vibration. It’S powered by two 18V LXT batteries (sold separately) and an efficient Brushless motor for maximum power, speed and run-time for corded demands, without the cord. The XRH07ZKU is engineered with advanced Anti-Vibration technology (AVT), a synchronized three-component system for significantly less vibration. Avt is more than just a padded handle. The three-component system includes an internal counterbalance that uses air pressure to move counterweight Pistons in the opposite direction of the drive piston to actively reduce vibration. The result is a low vibration rating of only 5M/s², but with No compromise in performance: the efficient Brushless motor delivers a full 8.4 ft. Lbs. Of impact energy, with 250-500 RPM and 1, 450-2, 900 BPM. For improved efficiency, it’s equipped with auto-start wireless system technology. Aws utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). when the trigger of the aws-equipped XRH07ZKU is engaged, the aws-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. Aws is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. Additional performance features include a torque limiting clutch engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and Constant speed control that automatically adds power to the motor to maintain speed under load to complete the most demanding jobs. Soft start technology suppresses start-up reaction for more precision and better accuracy, and the soft no-load function automatically reduces the speed of the motor when idling – this helps increase tool life and battery run-time. The XRH07ZKU is engineered for a range of concrete applications including drilling/coring through-holes for pipes, setting larger anchors, securing tilt-wall supports, small chipping applications, and more. It is ideal for a range of trades including masons, concrete contractors, demolition contractors, plumbers, electricians, Sprinkler installers, and general contractors seeking a best-in-class rotary hammer. It accepts SDS-MAX bits. It’S part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

• Two 18V LXT Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT platform (batteries not included)
• Powerful BL Brushless motor delivers 250-500 RPM, 1, 450-2, 900 BPM and 8.4 ft.Lbs. Of impact energy to handle the most demanding applications
• Auto-start Wireless system (AWS) utilizes Bluetooth technology for Wireless Power-on/off communication between tool and dust extractor
• Dust extraction capability with optional Makita dust attachment kit
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds

User questions & answers

Question:	Does this come with a hard case
Answer:	Check your RCA cable and see if it’s plugged into the SUb port on the back of the radio. If it is change it to the other ports. Should have 3 ports for the RCA jacks on the back of the radio.
Question:	Is this tough on batteries? I know it would be used more for holes and popping tile ect. rather than breaking but heard it goes through a lot of them
Answer:	Yes. Just like a car amp would
Question:	Is this drill reversible? I can't seem to find a reversible rotary hammer
Answer:	I hooked up in a boat so not sure on Ford, but I have installed many amps in vehicles and as long as you have rca ports it will work

Product features

Makita XRH07ZKU 18V X2 LXT Lithium-Ion (36V) Brushless Cordless 1-9/16" Advanced AVT Rotary Hammer, accepts SDS-MAX bits, AWS, Tool Only

18V X2 LXT (36V) Brushless 1-9/16” Advanced AVT Rotary Hammer with AWS is a cordless concrete solution that’s loaded with advanced engineering for maximum efficiency. It’s equipped with Auto-Start Wireless System (AWS) for wireless connectivity with an AWS-equipped dust extractor (sold separately), and features Advanced AVT for reduced vibration. It’s powered by two 18V LXT batteries (sold separately) and an efficient brushless motor for maximum power, speed and run-time for corded demands.

Product description

This 2200 Watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces. Since an air compressor is not required, this is one of the most portable jack hammers in the market. Adjustable 360° foregrip provides extra control and comfort during extended use. Our jack hammer is perfect for breaking up concrete, asphalt, mortar, hard clay, rocks, bricks and more! This jack hammer is perfect for home renovations or stone masonry project.

Features:

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• Excellent heavy-duty drilling power makes your work more efficient, use it at ease
• It accepts 1-1/8 in. hex shank bits
• Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches and carrying case

Specifications:

• Color: Red
• Power Type: Electric
• Voltage: 110V/60Hz
• Motor Power: 2200 Watts
• Chuck Size: 1-1/8 In.
• Chuck Type: Hex
• No Load Speed: 1900RPM
• Speed: 1800 Impacts Per Minute

Package Contents:

• 2200 Watt Electric Demolition Jack Hammer
• 16" Bull Point Chisel
• 16" Flat Chisel
• Protective Gloves
• Protective Goggles
• Oil Bottle
• 3 x Hex Keys
• Wrench
• Carrying Case with Handle

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches

User questions & answers

Question:	Tool weight=35lb, compared to 70lb for a similar tool with less amperage. Does this result in more handle vibration and less impact force at chisel
Answer:	No you cannot see the whole coin at once which is explained in the listing itself. A magnifying glass would do that but this is for serious up close viewing/ out farthest you can see most of the head on coin or in god we trust etc /but if looking for defects and double strikes this works very well and am happy that I got it....
Question:	does it last ?? is the life of the tools good
Answer:	biggest pixel is 1080 FHD 50-1200 is the magnification
Question:	One reviewer stated this item was 5o lbs but the product description says 35 lbs, which is correct
Answer:	Is not any chemical with the microscope.
Question:	will this accept bosch 1 1/8" bits
Answer:	Yes

Product features

Heavy Duty Electric Demolition Jack hammer

• Durable material and forceful impact provides maximum removal for all day demolition

• Anti-vibration system actively improves users comfortness

• Innovative design offers better weight distribution in both vertical and horizontal applications

• Rotating chisel locks into different positions to optimize work angles

• Speed control allows for various jobs, protection, and maintains constant speeds

Dress Properly

Do not wear loose clothing or jewelry. Rubber gloves and non-skid footwear are recommended.

Plastic Handle

The Plastic handle is designed to prevent users from electricity shock.

Do Not Abuse Cord

Never carry tool by cord or yank it to disconnect from receptacle. Keep cord away from heat, oil and sharp edges.

Product description

Demolition Breaker Hammer, Amps @ 120V 8.3 A, Impact Energy (Ft.-Lb.) 5.6 lb., Blows per Minute 2900, Drive System 3/4 Hex, Features Anti Vibration Spring, Handle Type D, Tool Length (In.) 16-5/8 In., Tool Weight (Lb.) 12.8 lb., Includes Tool Case

From the Manufacturer

This Hammer is compact and lightweight for maximum control and is ideal for light chiseling, scaling and chipping operations. Its soft rubber grip side handle swivels 360 degrees for easier handling. A unique anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue. This demolition hammer can be fitted with spline-style rotary hammers shank bits. Its one-touch retainer action means easy accessory installation and removal. The durable carbon brushes on this tool last for approximately 150 hours. Makita factory greased packed this tool for reduced maintenance. Your purchase includes a No. 4 hex wrench and a sturdy plastic tool case.

FEATURES

• Compact and lightweight for maximum control
• Soft rubber grip side handle minimizes vibration and swivels 360° for operator convenience
• Unique anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue
• Accepts same shank demolition bits as spline shank rotary hammers
• One-touch tool retainer action for easy accessory installation and removal
• Carbon brushes last for approximately 150 hours
• Factory grease packed for reduced maintenance

What's in the Box

• #4 Hex wrench (783202-0)
• Plastic tool case (150589-9)

SPECIFICATIONS

• Blows per minute: 2,900
• Impact energy: 7.6J
• Amps: (115V) 8.3
• Overall length: 16-5/8"
• Net weight: 11.7 lbs.
• Shipping weight: 24.7 lbs.

• Power Tools and Accessories
• Country of manufacture: China
• Manufacturer: Makita
• Compact and lightweight for maximum control
• Soft rubber grip side handle minimizes vibration and swivels 360° for operator convenience
• Soft rubber grip handle
• Unique anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue
• Accepts same shank demolition bits as spline shank rotary hammers

User questions & answers

Question:	Is this a drill as well, any feed back on that
Answer:	For analog cameras only. Not for ip cameras
Question:	it this a 60hz or a 50hz
Answer:	Yes, this unit is backwards compatible. So your cables and camera from the SDR-5100N will work. However, the resolution will stay the same as your BNC cables and cameras are all 600TVL units and not HD.
Question:	Is this rotary and demolition
Answer:	All I can say is that I Have 4 (8 inch) DS18 Marine Speakers Connected to this amp (Rockville) and they sound amazing.
Question:	is this hammer 110 or 220 volts
Answer:	Run a second set of RCA wires from the amps subwoofer low pass signal output jacks on the amp to the Inputs of the sub.use a RCA 1 to 2 splitter.

Product description

Demolition Breaker Hammer, Amps @ 120V 14, Impact Energy (Ft. -Lb. ) 18. 8, Blows per Minute 950-1900, Drive System SDS Max, Features Soft Start Variable Speed, 12 Position Bit Holder, Ergonomic Handle, Handle Type D Handle, Tool Length (In. ) 22-3/4 In. , Tool Weight (Lb. ) 20. 3 lb. , Includes Tool Case, Bit

From the Manufacturer

20 lb. Demolition Hammer, Accepts SDS Max Bits. L.E.D. service light notifies user when the brushes need replacing.It has 12 bit angles that be set for operating convenience. Automatic brush cut off system that protects tool for longer life. It has a power light that indicates switch failure or cord damage.

• Power tools and accessories
• Country of manufacture: China
• Manufacturer: Makita
• Hard hitting (25.5J), with less weight (20.3); ideal for horizontal work
• Electronic Speed Control Automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs
• Soft Start Suppresses start-up reaction for more control and better accuracy
• Variable Speed variable speed control dial that enables user to match the speed to the application for greater versatility
• 12 bit angles settings - Bit can be set at 12 different positions for operating convenience.

User questions & answers

Question:	Can you tell me which bit is included in the purchase
Answer:	Dear Customer, Yes this is the correct remote for this SNR. If you have any further questions you can contact Wisenet Tech Center at 844-947-3638 Best Regards, Soltech Security
Question:	Does it have a reverse switch
Answer:	Dear Customer, Yes this remote will work with the DVR unit that you have. If you have any further questions you can contact Wisenet Tech Center at 844-947-3638 Best regards, Livebear
Question:	could this reasonably be used to dig out fence posts / concrete
Answer:	Yes you can. If you need help you can always contact Samsung Tech Center at 877 349 3149
Question:	does product come in 120v
Answer:	Yes all these settings are available in the options setting on the DVR

Product description

The air-cushioned Makita 10 amp demolition hammer (model HM1211B) delivers 2, 000 BPM and 10.5 ft.Lb. Of impact energy (14.2 Joules) for demanding concrete applications. The D-shaped handle is engineered to help absorb vibration, while the one-touch latching retainer allows easy bit changes. The hex-style chuck accepts 3/4 in. Steel bits.

The Makita 20-pound demolition hammer features a powerful 10 Amp motor that provides fast and efficient operation. For user comfort and convenience, the rubber grip side handles absorb vibration and can be secured in four positions. This tool has been factory grease packed for reduced maintenance and it has an automatic brush cut-out when periodic servicing is due. It accepts commonly used 3/4-inch steel and measures 19-5/16-by-5-11/16-by-9-13/16 inches (length by width by height) and is backed by a one-year warranty.

What's in the Box

Demolition hammer, hex wrench, and plastic tool case.

• Powerful 10.0 AMP motor delivers 2,000 BPM for the most demanding applications
• Comfortable rubber D-shaped grip side handle absorbs vibration; secures in four positions for operator convenience in any position
• One-touch latch bit retainer for quick bit changes
• AC/DC switch for use with alternative power source
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Automatic brush cut-off protects commutator from damage for longer tool life
• Factory grease packed for reduced maintenance

User questions & answers

Question:	does product come in 240v i would need it in 240v
Answer:	With 2, 4-Amp-Hr, batteries I was able to drill 10, 3/4" Dia. holes, before the batteries we depleted.
Question:	Does this product came with the tool case
Answer:	Unfortunately it not reversable.
Question:	what is the matching ground rod driver
Answer:	Dear Customer, This remote is for Samsung model DVR units. This will not be compatible with your Tiger DVR. If you have any further questions you can contact Wisenet Tech Center at 844-947-3638 Best regards, Livebear
Question:	Does it come with any chisel
Answer:	Dear Customer, Yes this remote will be compatible with your DVR unit. If you have any further questions you can contact Wisenet Tech Center at 844-947-3638 Best regards, Livebear

Product features

Makita HM1211B 20 lb. Demolition Hammer, accepts 3/4" Hex bits

The air-cushioned Makita 10 AMP Demolition Hammer (model HM1211B) delivers 2,000 BPM and 10.5 ft.lb. of impact energy (14.2 Joules) for demanding concrete applications. The D-shaped handle is engineered to help absorb vibration, while the one-touch latching retainer allows easy bit changes. The hex-style chuck accepts 3/4 in. steel bits.

Comfort

D-shaped grip side handle absorbs vibration and secures in 4 positions.

Power

10AMP motor for faster and efficient operation.

Convenience

Rugged metal gear housing for longer tool life.

Specifications

-Blows Per Minute : 2,000 BPM

-Impact Energy (Joules) : 14.2 J

-AMPS : 10

-Overall Length : 19-5/16"

-Net Weight : 20.7 lbs.

-Shipping Weight : 33 lbs.

-Bit Type : 3/4" Hex - 21/32" Round

-Breaker/Demo class : 20

-Power Type : Corded

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during the one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers.

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This warranty does not apply to Makita Accessories.

This warranty does not apply where:

- Repairs have been made or attempted by others.

- Repairs are required because of normal wear and tear.

- The tool has been abused, misused or improperly maintained.

- Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of ‘merchantability’ and ‘fitness for a specific purpose,’ after the one-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

Our Exclusive 3 Piece, Hardened, cold steel forged SDS-Max Shank Point, Scaling & Flat Chisel Set provide unmatched DURABILITY, PERFORMANCE AND RELIABILITY for concrete and masonry demolition and surface conditioning. Includes a Heavy-Duty Metal Case for safekeeping and easy storage.

• ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application
• ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers
• ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal
• ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | Makita's Single-Piece Chisels are heat-treated and forged for unmatched STRENGTH and LONGEVITY, with its sharp edge design for MAXIMUM masonry impact
• ✅ Makita’s SDS-Max Shank Point Chisel demolishes and starts holes in concrete slabs, brick, mortar, slate, masonry, and all different types of stones | Makita’s Flat Chisel edges, chips, scales or channels concrete, stone, masonry and brick | Makita’s Scaling Chisel removes scale, rust, concrete, masonry, brick, stone and weld spatter or removes LARGE quantities of material

User questions & answers

Question:	Will theses work with bulldog bosch
Answer:	The Makita HM0810B 11Pound Hammer operates on 110 Volts AC Power Supply.
Question:	Does this fit the makita 20 pounds demolition hammer
Answer:	Yes.

Product description

The Makita 12 lb. Demolition Hammer delivers 8. 6 ft. lb. of impact energy with a powerful 10 AMP motor. It weighs only 12. 3 lbs. , creating a compact solution for overhead applications. The demolition hammer features Anti-Vibration Technology (AVT ) and vibration-absorbing rear handle to further reduce vibration. Constant speed control that automatically applies additional power to the motor to maintain speed under load to complete challenging jobs and a variable speed control dial enables users to match speed to the application. The HM1213C has a "soft no-load" function, which automatically reduces the speed of the motor when not in use which helps increase tool life and performance. The Makita Motor is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life Other features include an L. E. D. power light to indicate switch failure or cord damage and an L. E. D service light that notifies the user that the brushes need to be replaced. An automatic brush cut-off protects the commutator from damage for longer tool life. The 12 bit angle settings allows the bit to be set a different positions for operator comfort. Anti-Vibration Technology (AVT ) is a counterbalance system inside the tool that significantly reduces vibration. The AVT counterbalance design is based on seismic engineering, which developed this damping science to absorb shocks and protect buildings from earthquakes. AVT uses a mechanical damper, effectively a counterbalance weight inside the tool, that provides an equal and opposite force that puts a mass directly opposite the point where the striker bolt delivers the impact. As vibration is eliminated, power is efficiently increased which allows more of the generated energy in the motor to be delivered to the tool bit. For users, AVT means significantly less vibration with no compromise in power and performance.

• Powerful 10 AMP motor delivers 8. 6 ft. lbs. of impact energy to handle the most demanding applications
• Anti-Vibration Technology (AVT ) is an internal counterbalance system that greatly reduces vibration
• Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for better accuracy