13 best electric hammer chisels

Product description

This 2200 Watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces. Since an air compressor is not required, this is one of the most portable jack hammers in the market. Adjustable 360° foregrip provides extra control and comfort during extended use. Our jack hammer is perfect for breaking up concrete, asphalt, mortar, hard clay, rocks, bricks and more! This jack hammer is perfect for home renovations or stone masonry project.

Features:

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• Excellent heavy-duty drilling power makes your work more efficient, use it at ease
• It accepts 1-1/8 in. hex shank bits
• Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches and carrying case

Specifications:

• Color: Red
• Power Type: Electric
• Voltage: 110V/60Hz
• Motor Power: 2200 Watts
• Chuck Size: 1-1/8 In.
• Chuck Type: Hex
• No Load Speed: 1900RPM
• Speed: 1800 Impacts Per Minute

Package Contents:

• 2200 Watt Electric Demolition Jack Hammer
• 16" Bull Point Chisel
• 16" Flat Chisel
• Protective Gloves
• Protective Goggles
• Oil Bottle
• 3 x Hex Keys
• Wrench
• Carrying Case with Handle

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches

User questions & answers

Question:	Tool weight=35lb, compared to 70lb for a similar tool with less amperage. Does this result in more handle vibration and less impact force at chisel
Answer:	No you cannot see the whole coin at once which is explained in the listing itself. A magnifying glass would do that but this is for serious up close viewing/ out farthest you can see most of the head on coin or in god we trust etc /but if looking for defects and double strikes this works very well and am happy that I got it....
Question:	does it last ?? is the life of the tools good
Answer:	biggest pixel is 1080 FHD 50-1200 is the magnification
Question:	One reviewer stated this item was 5o lbs but the product description says 35 lbs, which is correct
Answer:	Is not any chemical with the microscope.
Question:	will this accept bosch 1 1/8" bits
Answer:	Yes

Product features

Heavy Duty Electric Demolition Jack hammer

• Durable material and forceful impact provides maximum removal for all day demolition

• Anti-vibration system actively improves users comfortness

• Innovative design offers better weight distribution in both vertical and horizontal applications

• Rotating chisel locks into different positions to optimize work angles

• Speed control allows for various jobs, protection, and maintains constant speeds

Dress Properly

Do not wear loose clothing or jewelry. Rubber gloves and non-skid footwear are recommended.

Plastic Handle

The Plastic handle is designed to prevent users from electricity shock.

Do Not Abuse Cord

Never carry tool by cord or yank it to disconnect from receptacle. Keep cord away from heat, oil and sharp edges.

• MAX POWER PERFORMANCE L-shaped SDS drill with a powerful 13 Amp motor with 7 Joules Impact Rate with SDS function let you finish any projects on Masonry, Concrete, Brick, Stone etc. or you can use the extra chuck for normal shank for metal and wood jobs, 0-900RPM, 0-4350BPM, The drilling capacity: 1-1/4 inch for concrete, 1-9/16 inch for wood, 1/2 inch for steel.
• FOUR FUNCTIONS Use the Knob to switch between (Demolition HAMMER DRILL) to make holes with SDS Drill bits, (Jack Hammer Chiseling) both position ideal for projects on Concrete, Brick, and Granite, etc., and normal (Drill Position) ideal for drilling and making holes in wood, metal, aluminum, etc. the last function (Position Adjustment) help you to chose the chisel position makes your job easy, you can use adjust depth gauge to preselect drilling depth for blind holes.
• VARIABLE SPEED pre-selection speed wheel to set the right speed for every job attached to HEAVY DUTY Soft-grip Handle for comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations
• SAFETY CLUTCH offers protection if the bit ever gets jammed while use it in any tasks such as brick chipping, tile and floor removal, or even making hole in concrete, masonry, metal, or wood.
• POWERFUL DESIGN SDS hammer drill with Active Vibration Reduction (AVR) dampening rotary hammer drill can help reduce hand-arm vibration through decoupling internal parts from the outside casting.

Product features

KSEIBI KBH 6-32 Rotary Hammer Drill 13 Amp SDS Plus Drill

The four-function KSEIBI KBH 6-32 L-Type SDS drill tool has a very powerful 13Amps motor and speed pre-selection for optimum control. It has a hammer function for drilling in concrete, a hammer stop function for regular drilling, and a rotation stop function for chiseling jobs.

Vibration Reduction System

Convenient L-shape and robust magnesium housing make this drill ideal for tough jobs involving drilling in concrete up to 1-1/4 inch and for chiseling.

Safety function

Safety clutch protection offers protection if the bit ever gets jammed while you are drilling or chiseling .

Powerful motor

Powerful 13 Amps SDS rotary drill for drilling in concrete as well as for regular drilling jobs. Use the hammer mechanism for drilling in concrete, and switch the mechanism off for regular drilling.

Durable case

Sturdy carrying case includes rotary hammer drill SDS plus drill bits, two chisels, normal drill chuck with adapter and key, depth gauge.

KSEIBI 1-1/4 inch Rotary Hammer Drill

The four-function KSEIBI KBH 6-32 L-Type SDS drill tool has a very powerful 13Amps motor and speed pre-selection for optimum control. It has a hammer function for drilling in concrete, a hammer stop function for regular drilling, and a rotation stop function for chiseling jobs.

What you can get:

The KSEIBI KBH 6-32 is supplied in a sturdy case with a set of three 8, 10 and 12 mm SDS plus concrete drill bits, a point chisel, a flat chisel and a 13-mm chuck with SDS Plus adapter, Extra carbon brush set.

Product description

The XtremepowerUS Electric Demolition Jackhammer is specially designed for demolition of structure. Great tool for individuals working on demolishing, chipping, crushing, scraping, driving ground rods and breaking through concrete or asphalt.

Features:

• Perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more
• Adjustable 360 degree side handle and ergonomic D-grip handle for comfort and control. Rotating swivel lock handle can be detached or re-positioned for better utilization
• Demolition Jack Hammer is designed to be lightweight and resilient, but provide a forceful impact when used
• With 3000 impacts per minute and an efficient 1000-Watt of power, be assured that this versatile jackhammer can effortlessly do the job for you
• Hex shank chisels are replaceable with most 5/8 in. hex shank bits
• Include pointed chisel for initial drilling and flat chisel for break up the chunks more easily
• Comes neatly organized in a heavy duty blow mold case with handle for easy transport between job locations

Specifications:

• Color: Black
• Power Input: 1000W
• Voltage: 120V/60Hz
• Amps: 9.1 AMPS
• Full-load Impact Rate: 3000 r/min
• No load Rotational Speed: 800rpm
• Maximum Drill Capacity Diameter: 1-1/2"
• Bit Type: 5/8" Hex Shank Bits

Package Content:

• Jack Demolition Hammer
• Point Chisel
• Flat Chisel
• Carbon Brush
• Carrying Case
• Manual

• ★ 1000-Watt Electric Demolition Concrete Breaker is engineered with a powerful 9 Amp motor that delivers up to 8 ft. lb. of torque power.
• ★ Maximum impact rate of 3000 r/minute and 1000-watts of consistent power give you enough force to tackle the toughest of demolition projects.
• ★ Secure-fit latched blow-molded storage case designed with handles to offer easy transportation and reliable housing for equipment.
• ★ Robust electric concrete breaker constructed from highly durable materials to provide a forceful impact for maximum removal and continuous demolition.
• ★ Included: The set includes a 5/8 in. hex bull point chisel , 5/8 in. flat chisel, tool wrench, and an extra set of carbon brushes.

User questions & answers

Question:	Can the handle be repositioned
Answer:	You mean the front handle, yes? Unscrew it, reposition, and re-screw it.
Question:	can somone tell me how i can find a 3inch wide chisel to fit this tool. Need it for removing tile, looking for something wider
Answer:	I looked in the description page as to which company sells the tool and from there went to their web page. I think the name is Chicago Tools and the 3-inch blade was $24.99 at the time.
Question:	what kind of oil is used with this hammer and how do I add it
Answer:	No oil need that hammer
Question:	How many Joules of energy it has
Answer:	It uses 1000 watts, so I guess that equates to 1000 joules. I'm not an expert. I think it uses less in actual practice -- maybe 600.

Product features

XtremepowerUS 1000-Watt Electric Demolition Hammer

The XtremepowerUS Electric Demolition Jackhammer is specially designed for demolition of structure. Great tool for individuals working on demolishing, chipping, crushing, scraping, driving ground rods and breaking through concrete or asphalt.

Lightweight Electric Jack Hammer

This Demolition Jack Hammer is designed to be lightweight and resilient, but provide a forceful impact when used. With 3000 impacts per minute and an efficient 1000-Watt of power, be assured that this versatile jackhammer can effortlessly do the job for you.

Versatile Demolition Tool

XtremepowerUS Demolition Jack Hammer comes with a hex bull point chisel and hex flat chisel cutter for chipping, digging, crushing concrete and asphalt. Hex shank chisels are replaceable with most 5/8 in. hex shank bits.

Flexible Swivel Handle

Adjustable 360 degree side handle and ergonomic D-grip handle for comfort and control. Rotating swivel lock handle can be detached or re-positioned for better utilization.

Impact Resistant Storage

Heavy Duty impact resistant storage case provides additional protection for tools. Blow-molded housing designed with handles to offer easy transportation and reliable storage of equipment.

• 🏡Find more about the product, please watch the videos on the last picture. 🎁Best 2021 gift/Thanksgiving gift/Christmas gift!
• 🤜The most powerful tool for all your construction needs! Limited time for promotion!
• ▲POWERFUL MOTOR&VARIABLE SPEED - The 12.3A motor with 7JOULES(5.2 ft./lbs) impact energy, 0-4350BPM, 0-900RPM, is optimal to complete work projects on concrete, metal, brick, stone and masonry, etc. Drilling capacity: 1-1/4 inch for concrete, 1-9/16 inch for wood, 1/2 inch for steel; With a 6-level variable speed dial, you’ll always remain in total control of your tool
• ▲4 FUNCTIONS in 1 KNOB - Just switch the dial to convert between Drilling(To drill material such as wood, steel, etc.)/ Hammer drilling(To drill concrete, granite, brick)/ Chisel position adjustment(Adjust the angle of the chisel before use)/ Chiseling (For chipping work on hard materials)
• ▲ERGONOMIC DESIGN - 1/2 inch drill chuck adapter, also compatible with other non-SDS-Plus bits, can finish a variety of drilling tasks; Vibration Damping Technology(VDT), the integrated vibration damper can decrease the vibration effectively, to reduce your fatigue; The soft grip handle prevents slipping off and provides more comfortable grip feeling and better handling of the power tool
• ▲SAFETY and CONTROL - Integral clutch reduces sudden and high torque reactions if bit jams, providing you high security during the heavy-duty projects; The 360°Rotating Handle and Metal Depth Gauge offer more precise control
• 🏆WIDE APPLICATION&WORRY-FREE PURCHASE - Perfect for tough tasks such as demolishing brickwork, removing plaster, taking off tiles and digging out old grouting, etc., suitable for drilling into materials including wood, masonry, concrete, and metal. ☂24-Month After-Sales Service, feel free to contact us through our store

Product features

TACKLIFE 1-1/4 Inch SDS-Plus 12.3 Amp Rotary Hammer Drill, 7Joules(5.2 ft./lbs) Impact Energy, 4350BPM, 900RPM, 4 Functions-TRH01A

If you are planning to carry out work that involves heavy-duty projects like a home renovation or even if you are trying to set up a new retaining wall, then you can be sure of getting things done much faster with a rotary hammer drill.

TACKLIFE TRH01A rotary hammer drill has a powerful 12.3-amp motor that helps to easily get the work done. It features a 1-1/4 inch drilling capacity with the ability to deliver 4350 beats per minute, 900 rounds per minute.

Powerful to use:

With this tool, you can tackle the most challenging tasks which include removing the plaster, digging out old grouting, taking off tiles and demolishing brickwork.

Easy to use:

• One-touch sliding chuck for quick bit changes;
• 6 level varible speed dial offers accurate bit starting;
• Auxiliary handle with textured grip makes the tool very comfortable to hold;
• Depth Gauge helps you maintain optimal drilling accuracy

4 Functions Easy Switching with One Knob

• Drill(To drill material such as wood, steel etc.)
• Hammer drilling(To drill concrete and granite)
• Chisel position adjustment(Adjust the angle of the chisel before use)
• Chiselling (For a work of chiseling or chipping)

Notice: The knob can only be switched after pressing the arrow tip.

Convenient Cover Plate

• Easily add lubricant after long time use.
• Universal lubricant.

Notice: The new tool doesn't need to add lubricant, and the lubricant provided is to maintain the motor after long time use.

Vibration Damping Technology(VDT)

• The Vibration Damping Technology(VDT) employed delivers reduced user vibration for less user fatigue and greater productivity.

SDS-Plus Chuck Adapter& Carbon Brushes

• Versatility-- comes with 1/2 Inch Drill Chuck with SDS-Plus adapter, compatible with other regular bits, can finish a variety of drilling tasks(The chuck adapter can only be used at drill mode, otherwise the adapter can get damaged at other modes. At hammer drilling/Chiseling mode, the original SDS-PLUS chuck is more powerful );
• Additional carbon brushes

• 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal.
• 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button.
• 【ERGONOMIC DESIGN】 AOBEN roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life.
• 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush and an extra chuck, fit drill bits size from 1mm to 13mm. Portable Carrying Case provides the perfect storage.
• 【MULTIFUNCTION】 AOBEN Professional rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. AOBEN provide 24 months warranty service.

User questions & answers

Question:	Are your products superior to Eneacro
Answer:	22.5 lb plus whatever bit you have chucked into it. Those vary from 2-8 lb.
Question:	Can I use a small drill bit, like 3/16", on this hammer drill? I need to drill small holes on the concrete
Answer:	Germany as all other expensive bosch tools
Question:	I see in the manual, it calls for 40w oil as a lubricant manual says not provided). yet many refer to grease. which is it
Answer:	Thank you for your question. Bosch Tools like 11316EVS from Bosch NA has a power rating of 110/120V. If you will use it to another country with 220V, you will be needing a power converter. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Can the 3 included drills be used on wood,masonry,concrete and steel or just concrete
Answer:	Thank you for your question. The 11316EVS comes with a carrying case. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product features

Drill Through Anything

Aoben electric rotary hammer drill is fueled by dominating 13-Ampere (1500watts) motor that packs-a-punch with each use. The precision bearings conclude for our drills amazing efficiency and the motor's durability. This much power and efficiency will easily let you drill through hard-wood, concrete, and metal

Stay Comfortable

Our powerful hammer drill was designed to bring comfort to your hands while performing those robust tasks. The vibration control design keeps you away from feeling a thing and the ergonomic design delivered with a fully-adjustable rubber 360-degree handle lets you hold on to the drill in just about any position

Operate with Ease

With our rotary hammer drill's easy to control and operate user experience, it was never easier to get out from between a rock and a hard place. The drill starts by simply pushing the trigger and the three function modes along with the double switch button allow you to easily switch between according to your needs

3-in-1 Perks

Aoben's electric rotary hammer drill comes with the ability of fast-switching between three different modes, each providing a different outcome:

Chisel Mode - A flat chisel used for cutting or shaping objects like wood, stone, or metal

Hammer drill mode - A powerful rotatory pulsing action using to make holes like a hammer on concrete and robust objects

Drill mode - A fast and powerful rotatory action to efficiently drill through solid objects

Life-Sustaining Built

What’s the point of having power and efficiency if it doesn't last forever? We at Aoben made sure that our powerful hammer drill wasn’t just made out of strong-quality materials, but also that it was designed to self-maintain and sustain its life year after year.

The cleverly designed heat exhaust system effectively avoids the motor from overheating and protects it from problems caused due to excessive temperature

A double layer bottom structure accounts for our hammer drill's anti-dust design which keeps the dust and other residues from settling inside the drill, resulting in an extended use life

• Voltage: 110V/60Hz, Input motor:2200 watt
• No Load Speed: 1900 Impacts Per Minute(55j)
• Blowmod Case Inculded
• Includes: 1-1/8" Bull Point Chisel, 1-1/8" Flat Chisel
• Perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more

User questions & answers

Question:	Can this brake up a concrete driveway
Answer:	No, 110
Question:	is this exact same as the other red one by Xtremepower that cost more money
Answer:	Mine did not have any instructions or manual, I found some decent videos on youtube that explain how to set up and operate.
Question:	What is the weight of the demolition hammer by itself
Answer:	I was fine using it just under 100'. Rule of thumb ( I am not an electrician) is if you use the same ga. of extension cord as the product you should be ok? 200' is a long way though?
Question:	How many amps? I can't imagine this is really 2200 watts, b/c it wouldn't run properly on a 20 amp circuit
Answer:	Yes there are tamper attachments available. You can find it on Amazon with search terms "demolition jack - tamper shank". Check to make sure it will fit your make and model.

Product features

Dimensions:

• Overall Dimensions:13.2 x 29.7 x 6.7 inches
• Bull point chisel:1-1/8"
• Flat chisel :1-1/8"

• 【POWERFUL HAMMER BREAKER】- Heavy duty, durable constructed jack hammer electric with 3600W power and 1800r/min impact frequency. Strong core technology meets the most demanding applications.
• 【DUAL HANDLE】- This electric jack hammer has 360 degrees swivel front handle for all-round application. Comfortable rubber D-shaped grip rear handle and absorbs vibration to reduce operator fatigue.
• 【DOUBLE CHISEL】- One 16" bull point chisel and one 16" flat chisel are included in the package for different usage. Quick assemble and disassemble. Clamp firmly and will never drop.
• 【STRUDY AND DURABLE】- Solid insulation protection shell with strong metal components inside. Protective lid with vent for rapid heat dissipation. Sheath at cable root elevates machine durability.
• 【WIDE APPLICATION】- Ideal for breaking concrete, asphalt removal, trench work and driving ground rods. Also applicable for compacting loose material if suitable part is attached.

User questions & answers

Question:	Does it have a 220 voltage
Answer:	yes, Rotella Diesel engine oil is used as a lubricant in this model of jack hammer. you can get this type of oil in some hardware store. if you can get the diesel high quality synthetic engine oil, then even better.
Question:	Can you get an instruction manual for this hammer? Didn’t come with one
Answer:	Mine appears to be 1 1/8 feel confident have two other is on site so can’t compare
Question:	Has anyone experienced or calculated voltage drop? my bad fence posts set in concrete are 50’-200’ from power source. will use 12 gauge cord. ty
Answer:	This hammer is on multiple sites under different names, but same tool.
Question:	can this be ysed with a tamper
Answer:	It’ll work awesome and the chisel bit is the best for that work. My question is...what kind of oil did you get for yours?

Product features

Unsurpassed Power

• 3600W heavy duty jack hammer with 1800 r/min no-load speed. Surging power is assured by copper-core motor and enlarged steel alloy cylinder. A professional and durable tool.

360° Rotary Ergonomic Handle

• 360° swiveling anti-skid fore-grip handle offer all-round operation angles to accommodate every situation. Considerate ergonomic design significantly remits strains caused by continuous working.

Secure Chisel

• Double chisels provided: 16" bull point and 16" flat. They clamp on firmly without waggling. However, when there's need for replacing, they are also quick-detachable. Fearless towards high temperature for long-time usage.

Chosen Material

• Solid insulation protection shell with no electric leakage, drop resistant and anti-corrosion. Inside metal parts gone through secondary quenching for advanced rigidity and abrasion performance.

Considerate Details

• Protective cap with ventilation facilitates rapid heat dissipation and keeps impurities out. High intensity switch and sheath designed around the root of the cable elevate durability of this machine.

Wide Application

• Perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!

Product description

The all new TR-300 series jackhammer by TR Industrial brings you more power and speed. The demolition hammer delivers an exceptional 60 Joules (44.2 ft-lbs) of impact energy while weights only 35 lbs (published weight on jackhammer only, not including the weight of chisel and extended power cord). Its high-strength modulus gear delivers longer life. With all metal housing and barrel, this jackhammer is built for heavy-duty applications. With unparalleled 1800 BPM (blows-per-minute), the ultra fast demolition helps your get the job done faster. For your safety and convenience, we have made an extra long 20-ft UL listed power cord with double insulated plug that comes with the demolition hammer - no more need for extension cords. The TR Industrial TR-300 Demolition Jack Hammer bears an ETL Listed Mark - it has been independently and rigorously tested to comply with UL safety standards. The demolition jack hammer comes standard with bull-point and flat chisel, a pair of premium tough work-gloves and a custom fitting molded case with wheels for easy transport. TR Industrial also offers other accessories for the TR-300 series demolition hammer for your need, additional accessories sold separately.

• 60 joules (44.2 ft-lbs) of impact energy delivers powerful, maximum performance
• 1800 BPM ultra fast demolition helps you get the job done faster
• All-metal housing built for heavy-duty applications
• 20-ft extra long UL listed power cord with double insulated plug, handles extreme-weather
• ETL Listed, rigorously tested and certified to comply with UL safety standards

User questions & answers

Question:	what floor scrapers work with this hammer
Answer:	It depends how many sq feet you are trying to brake up and how tick is your driveway. I think this device can be used for braking up a driveway but you will have to work much harder then with a big heavy jack hammer. I have used it on rocky soil for about 20 hours and for that this works great.
Question:	do you have bit to drive inch and half black iron pipe
Answer:	I think it is...for what it’s worth, this one works great I’m very happy with mine. It cost about the same money to rent one around here. I am able to run it on my small quiet 2000 watt Yamaha generator...so handy
Question:	What size breaker is recommended for this unit
Answer:	THE HAMMER WEIGHS 30 LBS. WITHOUT THE CHISEL. GOOD LUCK WORKS WELL!!
Question:	Anyone had experience with this unit driving 8 ft ground rods in clay/rocky ground? How effective
Answer:	Yes, it is 2200W , 110V, 20amp machine.

Product features

More Power. More Doing.

This TR-300 series demolition hammers delivers an exceptional 44 ft-lbs of impact energy while weights only 35 lbs.

With all metal housing and barrel, this jackhammer is built for heavy-duty applications. With unparalleled 1800 BPM (blows-per-minute), the ultra fast demolition helps your get the job done faster.

For your safety and convenience, we made an extra long 20-ft weathered proof power cord with double insulated plug for convenience.

TR-ONE shank is compatible with TR-100 and TR-300 series only.

Product description

The DEWALT DWMT70785 Air Chisel Hammer features a light weight aluminum body with a medium barrel design, and a shock absorbing handle for user comfort and ease. This air chisel has a touch control trigger for easy user control. It has a 1/4" air inlet, and and operates at a speed of up to 2,600 BPM (beats per minute). The DWMT70785 air chisel hammer accepts standard .401" chisel shanks. It includes 3 chisels for the user to pick from. It is backed by Dewalt's 3 year limited manufacturers warranty.

• Aluminum Body Design
• Touch Control Trigger
• Shock Absorbing Handle
• Accepts standard .401" chisel shanks
• 1/4" Air inlet
• 4.5 CFM Average Air Consumption

User questions & answers

Question:	How difficult was it to get the spring on? I think this one might have bad threading because it doesn't seem to want to go on
Answer:	The spring has a rounded hook with a tab on one end to hold the shaft of the chisel loosely in place. That end is on top. The other end just has a tab. If you use the two tabs on the spring to twist it on and off the spring will thread more easily. The tabs relieve the tension of the spring.
Question:	Would this work for grooving out cracks in concrete for patching
Answer:	Yes indeed. I have done some work to repair concrete cracks and the tool works great. It's best if you have an ample air supply.
Question:	Would this work with concrete
Answer:	Yes for small chucks
Question:	Would this work for demo of a brick chimney
Answer:	Definately. I use it for ceramic tile and stone demo. You will need plenty of air tho. I use a large compressor for this

Product description

It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more! Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand Ideal for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition (Scrapping ASIN: B074PHFBVQ / Scoop Shovel ASIN: B074PGFX5S *Sold Separately*)

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Ideal for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches
• It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition (Scrapping ASIN: B074PHFBVQ / Scoop Shovel ASIN: B074PGFX5S *Sold Separately*)

User questions & answers

Question:	Does this have a ground rod bit for pounding ground rods into the ground and if so what ones will work for it
Answer:	yes

• 【TIP-TOP QUALITY & EXCEPTIONAL PERFORMANCE】- Its marvelous performance in demolition is one particular feature that makes the demolition jack hammer so remarkable and popular. You can tell that from its 1200 rpm of speed rate and 1100 watts of motor power even without touching the machine. Supporting the powerful function is the heavy-duty metal construction that symbolizes extreme durability and corrosion resistance.
• 【360° ROTARY & ANTI-VIBRATION HANDLE】- To cater for different positions under varied circumstances, the 360-degree adjustable fore handle was designed and manufactured. After seeing its outstanding ability in adjustment, yet, you should not ignore its anti-slip rubber, which greatly enhances friction and absorbs vibration to realize full control of the hammer and a delightful work experience.
• 【TWO BULL-POINT CHISELS & ONE FLAT CHISEL】- Don't be surprised at the three chisels in the package. It is not an inadvertent mistake we made but a way to express our sincerity. There is one flat-head chisel and two bull-point chisels meeting a variety of demands for construction purposes. They are all at a length of 13.8 in. / 350 mm and made from heat-treated alloy steel. Quick assembly and disassembly bring added convenience. Once being clamped, it will never drop by accident.
• 【MAXIMUM COMFORT & UNMATCHED CONTROL】- Let me take you on a quick tour of several humanized details in the hammer. First, it is the rubber rear handle whose special D shape is capable of absorbing vibration to relieve muscle fatigue. Then, the trigger and lock button enables you to control the speed securely. After that, the viewable oil port makes timely maintenance of the machine an easy thing. Last, the cooling system will effectively dissipate heat and lift the security to a higher level.
• 【WIDE RANGE OF APPLICATION】- The demolition hammer gains itself good fame in demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, etc. You may find it applicable for various situations by its versatility, such as plumbing, mechanical installation, construction of water supply and drainage facilities, interior decoration, port facilities' construction, and other construction projects.

Product features

Electric Demolition Jack Hammer

Our 1100 watt electric demolition jack hammer with adjustable 360° fore-grip provides extra control and comfort during extended use. It is characterized by heavy-duty construction with an industrial-grade for high durability. Moreover, it has three chisels for multiply functions and a D-shaped handle to absorb vibration and reduce operator fatigue.

Surpassing Motor for Quick Break

The pure copper motor comes with strong power of 1100 watts delivering 1,200 impact beats per minute to easily break through concrete, brick, ground and earth. High load capacity and higher efficiency also mean increased productivity.

360° Rotary Ergonomic Handle

360-degree swiveling auxiliary handle with non-slip grip provides maximum control and support, making it easy to adjust the machine based on the positions needed for different jobs. The rubber grip also greatly reduces vibration to reduce muscle fatigue.

Heavy-duty Construction

The electric demolition hammer has heavy-duty metal construction equivalent of ultimate durability and solidity. Ridding you of worries of quality while performing a powerful function in your work will always be one of our main principles.

Three Replaceable Chisels

There are three chisels (13.8 in. / 350 mm) lying in the package. They are all forged from premium heat-treated alloy steel. The hexagonal chuck features quick assembly and disassembly. It is easy for you to replace the chisel that will never drop accidentally after being clamped.

Considerate Details

1. The D-shaped rear handle is covered by rubber, delivering great vibration absorption and fatigue reduction. 2. The trigger and lock buttons make speed control easier and more secure. 3. viewable oil port ensures timely and precise oil filling. 4. The blow and vent system effectively dissipates heat and enhances security.

Wide Application

An ideal tool for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, etc. Quite suitable for plumbing, mechanical installation, construction of water supply and drainage facilities, interior decoration, port facilities' construction, and other construction projects.

Specifications

• Power Type: Corded-electric
• Voltage: 110V / 50-60Hz
• Motor Power: 1100 Watts
• Chisel Size: 13.8 in. / 350 mm
• Chisel Type: Bull-point / Flat
• Rated Speed: 1200 RPM

• ✔️【POWERFUL MOTOR】 13Amp industry motor with 5.5 feet /lbs（7.4 joules)impact energy is designed to complete heavy duty concrete and metal working projects with ease and precision. Heat dissipation design and anti-dust bottom structure can extend the hammer’s use life.
• ✔️【HUMANIZATION DESIGN】 Safety clutch protection designed to guarantee your wrist When the hammer is subjected to high torque force. 360° adjustable handle and upgraded double layer anti-vibration system are helpful for better and stable holding.
• ✔️【FOUR FUNCTIONS】 Four different functions of drill,hammer,chisel and hammer drill function adapt to variety of work scenarios which are easy to switch. The double function switch design can extend 100% service life compared with single function switch design.
• ✔️【DRILLING CAPACITY】 The max drilling diameter for concrete is 1-1/4 inch and for metal is 1/2 inch. ENRH3203 rotary hammer drill can reach 820 r/min no-load speed and 4200bpm max impact frequency.The sds Plus chuck allows for easy and secure bit changes to keep your project going.
• ✔️【WHAT YOU WILL GET】 ENRH3201 rotary hammer*1;drill bits*3(5/16*6-Inch ,3/8 X6-inch,12/2 X 6-inch);5/9*10-inch point chisel*1,5/9*10-inch flat chisel*1;Auxiliary handle*1；Replaceable carbon brush 1 set;；329Grease*1；Dust proof cap*1；24 Months Defect Free Warrenty and Customer Support.

User questions & answers

Question:	would I be able to remove floor tile with this
Answer:	Ceramic tile I assume? This is a very powerful hammer drill. I use it to drill or bust thru all kinds of masonry products, poured concrete, blocks, brick, mortar etc.. It would have no problem with the tile, but you would have to be very careful not to damage the subfloor underneath, for tile typically some kind of cement board. This drill would easily punch thru that too. Check with a Home Improvement store or the Internet for a more appropriate tool/ technique. Otherwise I do endorse this product when used for the kinds of jobs designed for.
Question:	Is the case 100% plastic or is the silver part metallic
Answer:	Hello friend. The case is plastic and the silver part is aluminum
Question:	Is this strong enough to breakup the concrete walls of inground pool
Answer:	It possibly could be powerful enough, but it would surely take a long time. Better to rent a commercial tool for a job like this.
Question:	Hi sir, what is the difference between 'chisel' and 'hammer' functions? thanks
Answer:	The chisel doesn't rotate like a drill, but it still has hammer action.

Product features

MAKE AN IMPACT!

No matter you are a professional worker or a DIY user,ENRH3201 heavy duty hammer is definitely your wise choice.It applier to various working like dismounting walls, breaking floors, decorating houses, etc. With good heat dissipation system, ENRH3201’s motor will not be in high temperature even after long time working.

The safety clutch system protect users’ safety when the machine is overloading. Double layers anti-vibration control effectively reduce the vibration force during operation and avoid injury. Three different functions of drill,hammer and hammer drill function adapt to variety of work scenarios which are easy to switch.

360 Degree Adjustable Handle:

Auxiliary handle designed to reduce the fatigue of our users during longtime working .Provides accurate and convenient strike in some relatively narrow places.

Dustproof System:

Complete motor protection structure designed to prevent dust coming into motor during working.Allows our users work in a dusty working situation

Heavy Duty Motor:

200℃ resistant copper wire motor allows long working hours without burning the machine . 13Amp motor with safety clutch is designed to complete heavy duty work easily and safely.

Vibration Control:

The Vibration Damping Technology(VDT) effectively reduced injury during working.And soft grip handle designed for less fatigue and more precise control.

Heat Exhaust:

Efficient cooling system provides a continuous supply of fresh outside air for protecting motor from burnt due to high temperature.Extended service life.

SDS-PLUS Keyless Chuck:

Patented SDS-Plus keyless chuck is designed to improve your work efficiency. You never need any tool to change bits in-between jobs.Accurate control provides the maximum impact energy transfer.

• 【3 Function Modes】 Switch the button to choose from drill mode (rotation only), hammer mode (chiseling-only) and hammer drill (hammering and rotation) mode. It can be applied for drilling and chipping on wood, steel, concrete, masonry with different drill diameter. Plus, vario-lock offers optimized chiseling angles.
• 【SDS-plus Chuck & Complete Drill Bits Set】SDS-plus quick change drill chuck provided you with automatic bit locking. The chuck diameter of this impact drill is 1/2'' (13 mm) and the max drilling capacity is 1-3/16'' (30 mm). Additional 3 drill bits (6/8/10 mm), 2*Chisel (Flat and Point), 2 replaceable carbon brushes, a grease with a carry case for convenient operation.
• 【Variable Speed Trigger & Bidirectional Switch】 The variable speed trigger allows for precisely speed control by your own finger, you’re able to set a suitable speed for different applications to deliver optimal performance. Additionally, a forward and reverse switch for conveniently removing the stuck drill and a lock-on button can reduce fatigue for long hours work.
• 【High Performance Motor】 1100W heavy-duty copper motor can deliver powerful energy with 0-4000/min impact rate and 1100 r/min no-load speed to effectively complete the hard working projects. Safety clutch can guarantee the user’s safety when the machine is subjected to high torque force.
• 【360° Rotating Handle & Convenient Operation】 An auxiliary handle has an excellent flexibility to swivel 360 degrees with extra control and comfort. And it can be quickly installed and removed without any tools. The detachable scaled depth gauge allows you to accurately decide the drilling depth.

User questions & answers

Question:	I need to know the weight of the entire packing including the case n bits? I see where it said that the net weight is 63 pound, Is that true
Answer:	Mostly plastic. Also the water diverter is behind the square shower head. The control button refers to the water flow of the handheld after you have switched using the water flow.
Question:	What is the impact force of the hammer action
Answer:	yes it helps so you do not need to reach up
Question:	How much does the entire package weighs
Answer:	The push button changes the spray settings on the hand held but doesn’t turn it off. There’s a little lever on the top of the 10.5in shower head allows you to switch between using both/only 10.5in rain/ only handheld
Question:	Is this a good hammer drill for concrete floors? Just for household use
Answer:	screws to 1/2" outlet pipe. overhead mounting would require extending out let pipe to desired location

Product features

Your Best Asistant on Jobsite!

Goplus rotery hammer is your wise choice. With 1100 r/min no-load speed and 4000bpm max impact frequency, this hammer works perfectly in various occasions, including breaking concrete, chiseling walls, drilling woods and etc. In addition, the variable speed allows you to control the efficiency by your own finger, meanwhile the lock-on button ensures your safety.

360 Degree Adjustable Handle

Taking your convenience into consideration, the auxiliary handle can rotate 360 degree, and provides you with more accurate strikes.

SDS-Plus Keyless Chuck

Thanks to the SDS-plus chuck, changing drills has become much easier, and you never need any tool to change bits between jobs.

High Performance Motor

1100W motor brings you a impact rate up to 4000BPM, and a nominal speed up to 1100RPM, the strong power provides high efficiency.

Convenient Operation

The trigger makes the speed adjustment much simpler, and you can also use the switch to change the spinning direction.