11 best 35 lb demolition hammers

Product description

Demolition Breaker Hammer, Amps @ 120V 14 A, Impact Energy (Ft. -Lb. ) 25. 7 lb. , Blows per Minute 730-1450, Drive System 1 1/8 Hex, Features Soft Start Variable Speed, Handle Type D, Tool Length (In. ) 32-1/2 In. , Tool Weight (Lb. ) 38. 2 lb. , Includes Tool Case, Bit

From the Manufacturer

Makita's new 35 lb. Demolition Hammer, 1-1/8-Inch Hex, with Rolling Case has many features to help the end user get the job done. It has Adjustable D-Handle rotates 3600 and pivots. In-Line Design engineered better balance for horizontal applications. Accepts commonly used 1-1/8-Inch Hex and air tool steel. Retaining Collar for extra bit support. 11-Inch Bull Point Chisel included in case. Soft Ergonomic Grip can be used w/ both hands if necessary. Easy On/Off Switch one finger operation. Variable Speed Dial in Convenient Location.

• Powerful 14 AMP motor delivers 25.7 ft.lbs. of impact energy to handle the most demanding applications
• Constant Speed Control automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs
• Soft Start suppresses start-up reaction for smoother start-ups and better accuracy
• L.E.D. Service Light notifies the user approximately 8 hours before the brushes need to be replaced and L.E.D. Power Lights indicate switch failure or cord damage
• Variable Speed control dial enables user to match the speed to the application for greater versatility
• Extended Life Brushes are longer for more work between service intervals and less downtime
• For added convenience, the HM1307CB has a 16.4 ft. cord and accepts 1-1/8” Hex Bits for a wide variety of demolition applications. Includes a 20-1/2" Bull Point, 1-1/8" Hex and a Plastic Tool Case.

User questions & answers

Question:	Can I use a smaller hammer to remove 4-5” concrete pad
Answer:	120 volts as I read.
Question:	Will it penetrate basalt rock in a timely manner
Answer:	This may be difficult for such a small area of an inch or two. You'll have to use a smaller chisel to carve out whatever area you need. Score it like perforated paper and slowly take out the broken pieces. Don't rush.
Question:	Would this tool drive ground rods in rocky soil
Answer:	No, its 120 volt, regular USA plug. I thought the same thing as you when i saw 3600 watts. I researched it and 3600 watts is a theoretical instantaneous peak. I connected my hammer to a power meter and during normal operation of breaking up a concrete floor the continuous power draw was only 250-350 watts. In fact , I could not force my hammer to draw more than 500 watts. I don't know what one would do to make it pull 3600 watts!
Question:	is the body made of steel or plastic
Answer:	It will break rock. If you are breaking solid, thick limestone, it may be a little tough going. I'm not sure whether a 35-lb would be sufficient, or if a 70-lb hammer would be better for you, but this will break rock. A lot of folks, myself included, have had some issues, likely with an o-ring, where the hammer leaks oil from above the chisel. But the hammer itself continues to work and has good power.

Product features

Makita HM1307CB

The Makita HM1307CB 35 lb. Demolition Hammer combines hard-hitting power with additional features including soft start and a variable speed control dial for improved performance. The HM1307CB accepts 1-1/8” Hex Bits, and is ideal for both horizontal and vertical demolition and breaking applications.

14 AMP Power

The HM1307CB is engineered with a 14 AMP motor that provides 730-1,450 BPM and 34.9 joules (25.7 ft.lbs.) of impact energy, with constant speed control that automatically applies additional power to the motor to maintain speed under load. Consistent with the rest of Makita’s concrete hammer line-up, the HM1307CB is engineered with the Makita Motor Advantage. This includes field core interlocking steel laminations, dual ball bearing armature, and large surface commutator. These features deliver the most efficient transfer of energy for more power and longer tool life.

Additional performance features include soft start, which suppresses start-up reaction for more control and greater accuracy. The L.E.D. service/power indicator indicates switch failure or cord damage, and also notifies the user approximately 8 hours before the brushes need to be replaced. At the same time, the HM1307CB is engineered with extended life brushes.

The HM1307CB has a large side handle with an easy-to-operate switch control. For added convenience, the HM1307CB has a 16.4 ft. cord and accepts 1-1/8” Hex Bits for a wide variety of demolition applications.

Specifications

• AMPS: 14
• Blows Per Minute (variable speed): 730 - 1,450 BPM
• Impact Energy (ft.lbs.): 25.7
• Vibration Control : No
• Vibration (m/s²): 12
• Noise Level: 101 dB
• Cord Length (ft): 16.4'
• Overall Length: 32-1/2"
• Bit Type: 1-1/8" Hex
• Breaker/Demo>

Product description

2200 watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces. Since an air compressor is not required, this is one of the most portable jack hammers in the market. Adjustable 360° foregrip provides extra control and comfort during extended use. Our jack hammer is perfect for breaking up concrete, asphalt, mortar, hard clay, rocks, bricks and more! This jack hammer is perfect for home renovations or stone masonry project

Feature:

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Excellent heavy-duty drilling power makes your work more efficient, use it at ease
• It accepts 1-1/8 in. hex shank bits
• Delivers 1800 BPM for fast demolition
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches and carrying case

Specifications:

• Color: Red/Black
• Power Type: Electric
• Voltage: 110V/60Hz
• Watt: 2800
• Joules: 55
• Chuck Size: 1-1/8"
• Chuck Type: Hex
• No Load Speed: 1800RPM (blows-per-minute)
• Overall Dimension: 26.5"(L) x 5.9"(W) x 8.75"(H)

Package Content:

• Electric Demolition Jack Hammer
• 16" Bull Point Chisel
• 16" Flat Chisel
• Protective Gloves
• Protective Goggles
• Oil Bottle
• 3 x Hex Keys
• Wrench
• Carrying Case with Handle

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition (Scrapping ASIN: B074PHFBVQ / Scoop Shovel ASIN: B074PGFX5S *Sold Separately*)
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Ideal for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• Including Electric Demolition Jack Hammer with bull point chisel, flat chisel, pair of protective gloves, protective goggles, hex wrenches

User questions & answers

Question:	Tool weight=35lb, compared to 70lb for a similar tool with less amperage. Does this result in more handle vibration and less impact force at chisel
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Dear customer, thank you so much for your question about this flat iron. Yes, you could use this as 2 in 1 straightener and curler with 1 inch curves. For any further questions be free to contact us via email and we are more than happy to help you with.
Question:	does it last ?? is the life of the tools good
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Dear Customer, thank you so much for your question, yes, this flat iron can work as both straightening iron and curling wand. you can make 1'' curves by using this flat iron. For any further questions be free to contact us via email.
Question:	One reviewer stated this item was 5o lbs but the product description says 35 lbs, which is correct
Answer:	It's a great product to use
Question:	will this accept bosch 1 1/8" bits
Answer:	Mine is doing the same thing and it’s only a couple months old...

Product features

Heavy Duty Electric Demolition Jack hammer

• Durable material and forceful impact provides maximum removal for all day demolition

• Anti-vibration system actively improves users comfortness

• Innovative design offers better weight distribution in both vertical and horizontal applications

• Rotating chisel locks into different positions to optimize work angles

• Speed control allows for various jobs, protection, and maintains constant speeds

Dress Properly

Do not wear loose clothing or jewelry. Rubber gloves and non-skid footwear are recommended.

Plastic Handle

The Plastic handle is designed to prevent users from electricity shock.

Do Not Abuse Cord

Never carry tool by cord or yank it to disconnect from receptacle. Keep cord away from heat, oil and sharp edges.

• OSHA Compliant (Rule 29 CFR 1926.1153), Table 1 of Specified Exposure Control Methods. *Must properly implement engineering controls, work practices, & respiratory protection as specified in Table 1
• Vacuum's powerful Makita-built BL Brushless motor delivers 74 CFM and 39" water lift of suction using two 18V LXT Lithium-Ion batteries (batteries not included)
• Vacuum's efficient two stage HEPA filtration system captures 99.9y% of particulates .3 microns and larger
• Vacuum's filter cleaning system is designed to maintain optimal suction efficiency and longer filter life
• Demolition Hammer's powerful 14.0 AMP motor delivers 25.7 lbs. of impact energy to handle the most demanding applications
• Dust Extraction Attachment attaches directly to 1-1/8" hex shank demolition hammers for efficient dust extraction; Durable construction for use on the most demanding job sites

Product description

The all new TR-300 series jackhammer by TR Industrial brings you more power and speed. The demolition hammer delivers an exceptional 60 Joules (44.2 ft-lbs) of impact energy while weights only 35 lbs (published weight on jackhammer only, not including the weight of chisel and extended power cord). Its high-strength modulus gear delivers longer life. With all metal housing and barrel, this jackhammer is built for heavy-duty applications. With unparalleled 1800 BPM (blows-per-minute), the ultra fast demolition helps your get the job done faster. For your safety and convenience, we have made an extra long 20-ft UL listed power cord with double insulated plug that comes with the demolition hammer - no more need for extension cords. The TR Industrial TR-300 Demolition Jack Hammer bears an ETL Listed Mark - it has been independently and rigorously tested to comply with UL safety standards. The demolition jack hammer comes standard with bull-point and flat chisel, a pair of premium tough work-gloves and a custom fitting molded case with wheels for easy transport. TR Industrial also offers other accessories for the TR-300 series demolition hammer for your need, additional accessories sold separately.

• 60 joules (44.2 ft-lbs) of impact energy delivers powerful, maximum performance
• 1800 BPM ultra fast demolition helps you get the job done faster
• All-metal housing built for heavy-duty applications
• 20-ft extra long UL listed power cord with double insulated plug, handles extreme-weather
• ETL Listed, rigorously tested and certified to comply with UL safety standards

User questions & answers

Question:	what floor scrapers work with this hammer
Answer:	It depends how many sq feet you are trying to brake up and how tick is your driveway. I think this device can be used for braking up a driveway but you will have to work much harder then with a big heavy jack hammer. I have used it on rocky soil for about 20 hours and for that this works great.
Question:	do you have bit to drive inch and half black iron pipe
Answer:	I think it is...for what it’s worth, this one works great I’m very happy with mine. It cost about the same money to rent one around here. I am able to run it on my small quiet 2000 watt Yamaha generator...so handy
Question:	What size breaker is recommended for this unit
Answer:	THE HAMMER WEIGHS 30 LBS. WITHOUT THE CHISEL. GOOD LUCK WORKS WELL!!
Question:	Anyone had experience with this unit driving 8 ft ground rods in clay/rocky ground? How effective
Answer:	Yes, it is 2200W , 110V, 20amp machine.

Product features

More Power. More Doing.

This TR-300 series demolition hammers delivers an exceptional 44 ft-lbs of impact energy while weights only 35 lbs.

With all metal housing and barrel, this jackhammer is built for heavy-duty applications. With unparalleled 1800 BPM (blows-per-minute), the ultra fast demolition helps your get the job done faster.

For your safety and convenience, we made an extra long 20-ft weathered proof power cord with double insulated plug for convenience.

TR-ONE shank is compatible with TR-100 and TR-300 series only.

Product description

Champion Chisel Works ++++ FITS ONLY DEMOLITION HAMMERS THAT ACCEPT THE 1-1/8" HEX NOTCH SHANK STYLE. ++++

Champion Chisel's Heavy Duty Floor Scraper System was developed for use with Demolition Hammer Carts that are on the market.

The Heavy Duty Floor Scraper is built to withstand the abuse the tools will see when used with the Hammer Carts.

A strong 6" wide and 2mm thick stainless steel blend blade ensures the job gets done right the first time.

Two piece system allows for proper orientation with your hammer.

Made for the larger 1-1/8" Shank Style hammers, this floor scraper can be used as a handheld or with the hammer cart.

This floor scraper system will fit 1-1/8" Hex Notch Style Hammer from Bosch, Makita, Milwaukee, and Dewalt hammers as well as any other 1-1/8" Hex Notch Power tools on the market.

• 1-1/8 Hex Notch Shank
• New Hex Bolt Fasteners
• Tempered to increase impact durability
• Will fit all 1-1/8" Hex Notch Demolition Hammers on Market
• Designed for use with Hammer Carts

User questions & answers

Question:	What is the model number for the replacement blades? Where can I get them
Answer:	Yes it’s the water stem part definitely does make a noise
Question:	The price
Answer:	Yes, Puedes usarlo en Perú.
Question:	Is this a counterfeit I can’t find this part number on Makitas website
Answer:	Dear customer, in order to provide the best service possible, MKBOO offers all of our customers an unconditional 45 day money back guarantee. In addition, all of our products are backed by a 2 years warranty. For any question with the product, please feel free to contact the service team. We will offer you the best solution.
Question:	where can I find bits that fit older makita demo hammer
Answer:	Yes, This steam flat iron apply to all hair types.
Question:	what type of lubricant goes in makita1304b wallbuster
Answer:	Dear customer, thank you for your question about out hair flat iron, I would recommend you to brush your hair before apply this titanium straightener and then iron a small strands of your hair and iron your hair softly. For any further questions be free to contact us via email ([email protected])

Product description

The Sure Strike drilling hammer from Estwing, has a forged steel blue painted head which is hardened and tempered. Both faces are fully polished. Designed for striking cold chisels, brick chisels, punches, star drills, spikes and hardened nails. Both faces are beveled. This drilling hammer has an 11 in. jacketed and textured yellow fiberglass handle which allows for heavier blows in an environment where there is limited swing. A strong reliable tool you can count on. Protect your eyes from flying particles and dust. Always wear safety goggles. Bystanders shall also wear safety goggles.

From the Manufacturer

The Sure Strike line of fiberglass tools from Estwing has forged steel heads with fiberglass handles for strong reliable tools you can count on.

• FORGED STEEL HEAD – Maximum strength and durability for a lifetime of hard work
• BALANCE AND TEMPER – The most durable, longest lasting striking tools available
• HEAVY HITTING HAMMER – Perfectly balanced to deliver powerful blows with an easy swing
• FIBERGLASS HANDLE – Lightweight, durable handle offers a comfortable controlled swing with a ribbed grip to prevent slips
• VERSATILITY ON THE JOB – Use with chisels, punches, star drills, hardened nails & more

User questions & answers

Question:	Can I use this to tear through drywall etc on rehab property
Answer:	I find that the more I’ve used it, the less effective it has become for this purpose. Either I’m getting better at detecting nails, or worse at appendages. This is odd considering I’m all thumbs.
Question:	Would this be good for chizzles
Answer:	As treatment technologies differ, we recommend you check with your stylist before using our products. If you ever have any other questions regarding this product please do not hesitate to use the "Contact Us" page on our website!
Question:	Is this the same thing at a sledge hammer
Answer:	Great question! This Tresemme Keratin Smooth Flat Iron Smoothing Spray is a heat protection spray that helps shield hair from heat up to 450°f so you can achieve a smooth look while protecting your hair from heat styling. We hope this helps.
Question:	made in china
Answer:	No, it's not a spray. It squirts out of the top like lotion or body wash.

Product features

Estwing Surestrike Drilling Hammer

Since 1923, the Estwing has taken pride in designing and manufacturing the world's most durable, comfortable and attractive striking and struck tools. All claw hammers, axes, specialty tools and pry bars are manufactured to the highest possible standards and offer a true value to both tradesmen and craftsmen alike.

Estwing continues to innovate and produce new handtools. Our engineers work continually to create the most revolutionary and long lasting hand tools on the market.

Forged Perfection

The heavy-duty forged steel head provides maximum strength and durability for a lifetime of hard work.

Fiberglass Handle

Lightweight, durable handle offers a comfortable controlled swing with a ribbed grip to prevent slips.

Balance and Temper

Among the most durable, longest-lasting striking tools available.

Available in 2 Sizes

The Estwing Drilling Hammer comes in both a 3 lb version and 2 lb version.

Product description

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new conditions. Some tools may contain cosmetic blemishes. The Bosch 35-Lb. demolition hammer boasts an unmatched power to weight ratio with an impact force of 34 lbs. for the fastest removal rate in its class. Shock-absorbing top handle reduces vibration.

• Reconditioned Bosch Products have a One-year warranty through the Bosch factory or an authorized service center
• Unmatched Power to Weight Ration - 34 ft-lbs Impact Force - faster removal rate in its class by far!
• Active Vibration Control Handle - a unique flexible two-handed design that reduces vibration by 40% over the closest competitor
• Versatile Bit Retention - Accepts Bosch 1-1/8" Hex Steel as well as standard 1-1/8" air steel
• Total Comfort and Control - Articulating Auxiliary Handle to maintain the best working posture possible.

User questions & answers

Question:	How many watts does it need to operate
Answer:	More amps or watts usually bigger motor. Bigger motor means bigger hammer. Every tool has its place depends on the task at hand. I used the one I bought for a driveway and it hit good and hard.
Question:	What kind of bits it used can it used sds bits
Answer:	I purchased it in March 2015. I used it to dig a sump to install a sump pump, as well as dig a french drain, and several drainage ditches in clay soil. It gave out about a year or 2 later while breaking up a concrete pad an above-ground pool used to sit on. It was always oiled, and after disassembling it, I guess that a part was being worn down as it spun, but I dunno much about electric motors. It just looked worn down in parts, so that's what I think happened. All in all, the tool costs about as much as a day-and-a-half rental, which I got much more than that. So now, 3 years from the first purchase, I'm ordering it again. I expect to get plenty more than a day and a half out of it, but it won't last forever. I'm happy enough with it to do it again.
Question:	Does it come with the rolling case
Answer:	I weighed the components of this 2200 watt jack hammer on a shipping scale, and here is the breakdown:Main electric hammer unit by itself (without installed bit): 31 poundsChisel bit: 3 poundsBull bit: 3 poundsPlastic enclosure with the 3 included wrenches: 8 pounds
Question:	Is Moil Point or Chisel included
Answer:	No. Although these are 1-1/8 hex shank chisels they are the ones that have a smaller diameter cylindrical portion at the top where it goes into the tool. The "normal" 1-1/8 hex chisels are a continuous hexagon all the way. They're not interchangeable even though the sizes are the same. However, the included ones have held up quite well. Even so, they're relatively easy to find. Amazon carries compatible chisels as does the local harbor freight stores.

Product description

The Makita 11 lb. Demolition Hammer (HM0870C) has more power with 8. 4 ft. lb. of impact energy, yet weighs only 11. 1 lbs. The HM0870C (accepts SDS-MAX bits) has constant speed control that automatically applies additional power to the motor to maintain speed under load. The 12 bit angle settings allows the bit to be set a different positions for operator comfort. The Makita HM0870C Demolition Hammer is ideal for horizontal work.

From the Manufacturer

Makita small demolition hammer is designed to hit hard for tough jobs. It is small but very powerful for quick removal of material. Includes 11 lb. SDS-Max Demolition Hammer with Case - HM0870C, Side Handle, Bit Grease, Cleaning Cloth, Tool Case

• Powerful 10 AMP motor delivers 8. 4 ft. lbs. of impact energy to handle the most demanding applications
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• Easy-to-operate slide switch increases productivity and allows for continuous use
• L. E. D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• L. E. D. power light indicates switch failure or cord damage
• Powerful 10.0 AMP Motor & Compact Design

User questions & answers

Question:	What is the frequency of this hammer 50/60hz
Answer:	The D25951K has a weight of 41.300 LBS ( the whole kit). The tool itself weighs 29.3 LBS.
Question:	this makita include storage case
Answer:	It is a 15 amp motor. To figure out wattage- multiply the amp rating by 120 (in North America). For example, a table or miter saw rated at 15 amps will require around 1800 watts continuous, thus a 2500 watt generator, inverter or transformer would be the absolute minimum, with a larger unit being ideal. Also keep in mind- inverters, generators and transformers have widely differing designs and power quality.
Question:	Frequency of the tool I know it's 110v but what is the frequency 50/60hz
Answer:	The hammer is 29 pounds. Possibly the 40 pounds is referring to shipping weight.
Question:	How much does it cost the shipping and delivery to colombia...?¿.. Bogotá Colombia Latin America. Thnx
Answer:	Yes, the D25951K will include a kit box.

Product description

The IS-500 Series 42-pound demolition jack hammer combines high performance with anti-vibration design to help you handle the most demanding demolition jobs. Best in class powerful performance: 36 ft. lbs. of impact energy and 1,400 blows per minutes. Proprietary hammer design delivers consistent, satisfying hammering action. Anti-vibration technology greatly reduces vibration and gives you maximum balance and control. Compatible with TR-Hex chisels or 1-1/8 in. hex chisels from major brands. A point chisel and a flat chisel is included. Hammer and accessories come in a heavy duty rolling storage case built tough for jobsites. TUV cerfitied to meet UL safety standards . The TR Industrial IS-500 42-Pound Demolition Hammer combines high performance with anti-vibration design to help you handle the most demanding demolition jobs. Features best in class powerful performance: 36 ft. lbs. of impact energy and 1,400 blows per minute. Proprietary hammer design delivers consistent, satisfying hammering action. Compatible with TR-Hex chisels or 1-1/8 in. hex chisels from major brands. A point chisel and a flat chisel is included. The Anti-vibration technology greatly reduces vibration and gives you maximum balance and control. A heavy duty rolling storage case, built tough for job sites, is included. Other features include rubberized handle, and extra long 16 in. cord with double insulated plug. Certified by TUV Rheinland to meet UL and CSA safety standards.

• The IS-500 Series 42-pound demolition jack hammer combines high performance with anti-vibration design to help you handle the most demanding demolition jobs
• Best in class powerful performance: 15 Amp motor with 36 ft. lbs. of impact energy and 1,400 blows per minutes. Proprietary hammer design delivers consistent, satisfying hammering action.
• Anti-vibration technology greatly reduces vibration and gives you maximum balance and control
• Compatible with TR-Hex chisels or 1-1/8 in. hex chisels from major brands. A point chisel and a flat chisel is included. Hammer and accessories come in a heavy duty rolling storage case built tough for jobsites
• TUV cerfitied to meet UL safety standards

User questions & answers

Question:	does it come in 220vac 60hz
Answer:	The heavy metal buckle.It clicks into place.Very practical and sturdy material.
Question:	I have an 1 1/8" hex w/ring but no notch tool. will it work
Answer:	Yes, it is strong. This belt was recommended by my son's physical therapist, and it works great. My son is around 160 pounds, and the belt has not popped open once.
Question:	Can this break apart dense natural stone
Answer:	It is slightly course feeling, you could wear a thin tee shirt that you don't mind getting wet and leave it in the shower until nect time. The belt is worth it to wear for safety. As a PT I know it is the best transfer belt out there
Question:	I year of warranty
Answer:	I got several for my fathers horse therapy. They had some pediatric ones that are rainbow that I know fit small two year olds and up. You may want to do search on pediatric and see the sizes to compare. This one has been outstanding though.

Product features

Best in Class

The TR Industrial IS-500 15 Amp 42-Pound Demolition Hammer combines high performance with anti-vibration design to help you handle the most demanding demolition jobs.

Best in class powerful performance: 15 Amp motor with 36 ft. lbs. of impact energy and 1,400 blows per minutes. Proprietary hammer design delivers consistent, satisfying hammering action.

Product description

SDS Max Demolition Hammer, Amps @120V 13, Impact Energy 9. 6 ft. lb., Blows per Minute 1300 2900, Dial Speed Control, Soft Start, 12 Position Variable Lock Tool Holder, Handle Type Soft grip Vibration Control, D Handle, Tool Length 22 1/2 In, Tool Weight 13. 6 lb., Includes Carrying Case

Unmatched power-to-weight ratio; 13 amp, 9.6-feet per pounds impact force. Fastest removal rate in its class. Vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work. Tool indicates when preventative maintenance is required. Compatible Accessories: HS1828, HS1906, HS1909, HS1910, HS1911, HS1911B20, HS1912, HS1912B10, HS1913, HS1913B20, HS1914, HS1914B10, HS1915, HS1916, HS1917, HS1918, HS1920, HS1921, HS1922, HS1924, HS1926, HS1927, HS1929, HS1934, HS1935, HS1936, HS1969.

• Versatile: Hammer Only Mode for Chipping and Demolition Applications; Material Metal, Plastic
• MULTI USE APPLICATIONS: Chips and breaks up block, concrete, tile and tough materials
• PERFORMANCE: Featuring Constant Response circuitry that maintains speed under load, overload protection as well as smooth startup control
• POWER: Weighing only 13.7 lbs., the Bosch 11321EVS Demo Hammer provides an outstanding power to weight ratio 6.1 feet pounds of impact energy and a max of 2,900 BPM
• OPTIMIZED: Includes Bosch’s Auto Max speed dial which ensures maximum speed every time the tool is turned on, matching the hammer power to the application; Vario Lock positioning provides optimized work angle for the best chiseling location

User questions & answers

Question:	what is the difference in the Bosch 11321evs and 11264evs
Answer:	Without actually using each of the others, your question can't be answered. What I can tell you is that my son uses this hammer 12 hours a day alongside other men doing the same job. The others are envious of this hammer because it's so much easier to use than other hammers and doesn't cause as much physical discomfort as others can. When it wears out, it will be replaced with the same hammer. I hope this helps.
Question:	means what
Answer:	Made in China
Question:	Why is there conflicting info between amazon and bosch website on the impact energy. Bosch states 6.1 ft_lbs and amazon states 9.6 ft/lbs
Answer:	No, if your looking for a smooth face. Look for a finishing hammer.
Question:	What is the difference between the 11321EVS and the 11264EVS
Answer:	shipping has a cost. the more it weighs the more it costs.

Product features

What Is Crystalline Silica?

Silica, often referred to as quartz, is a very common mineral. It is found in many materials common on construction sites, including soil, sand, concrete, masonry, rock, granite, and landscaping materials. The dust created by cutting, grinding, drilling or otherwise disturbing these materials can contain crystalline silica particles. These dust particles are very small and invisible to the naked eye. When inhaled, even in very small amounts, silica dust can cause serious health hazards. Each exposure to silica adds to the lung damage.

What Is Silicosis?

Silicosis is a disabling, irreversible, and sometimes fatal lung disease. When a worker inhales crystalline silica, the lungs react by developing hard nodules and scarring around the trapped silica particles. If the nodules become too large, breathing becomes difficult and death can result. There is no cure for this disease, but it is 100% preventable.

Get Compliant

Whether you are concerned about the health of your employees, your health, compliance or increasing productivity, Bosch has developed PRO+GUARD protection systems. In order to move toward compliancy and protection, it is critical that every component in the system is designed to effectively remove dust. Bosch dust collection systems can reduce airborne dust, helping to create a safer and healthier working environment.

Protect Yourself & Others

The Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease in Americaʼs workers by limiting their exposure to respirable crystalline silica. While using power tools with a dust attachment/ accessory and dust extractors with the right filter, exposure to silica can be drastically reduced. The new standard went into effect on June 23, 2016, and employers are required to comply with all obligations of the standard by June 23, 2017.

Product description

Hex Flat & Point Chisel Bit Set are multipurpose chisel bits commonly used for breaking and through concrete, aggregate soils, hardened clay, and asphalt for construction and demolition application. This chisel bit works with a jack hammer with 1-1/8" hex shank. Heat-treated industrial-grade steel construction offers excellent strength and durability.

Feature:

• For jack hammers, these extra-long sturdy hex hammer bits are designed for serious demolition
• Bull point tip chisel works great with breaking through concrete and other hard surfaces
• Flat tip chisel provides improved directional control for clean and smooth edge finishing
• Precision machined and heat-treated from industrial-grade steel alloy for long-lasting durability and strength
• Compatible for use with 1-1/8 in. hex shank demolition hammers and concrete breakers

Specifications:

• Product Type: Flat & Point Chisel Bit Set
• Material: Steel
• Shank Style: 1-1/8 in. Hex
• Drill Bit type: Masonry Drill Bit
• Bit Length: 16 in.
• Product Dimension: 16.5 in. x 3 in. x 1.5 in.

Package Contents:

• 1 X Flat Tip Chisel Bit
• 1 X Bull Point Chisel Bit

• Universal compatible fit most demolition hammers and some jack hammers for convenience with a hex 1-1/8" shank
• The long distance design of the handle allows cleaning at all angles for easier work
• Made with high-grade forged and heat treated steel for maximum durability
• Bull Point Chisel Ideal for starting holes in concrete slabs and general chipping
• Flat Chisel Ideal for removing tile, stone, and other masonry, bathroom or kitchen projects

User questions & answers

Question:	Will this work with a Wacker Jackhammer
Answer:	$12-23.00
Question:	does this fit the mophorn 3600w demolition hammer
Answer:	No its not a counterfeit. Its a great tool. I have been using the very same model for years and its wonderful.
Question:	Does this compact the soil enough for concrete work
Answer:	I found them at various places online.
Question:	I am removing several medium to large shrubs for a porch addition, will this work at cutting the roots around the shrubs for easier removal
Answer:	hammer grease and/or even axle or bearing grease works just fine.